Вакансии

Location: Houston, TX, United States Position Summary The Electronics Technician - ILI Systems & Equipment owns the full lifecycle of PIPECARE Western Hemisphere’s electronics assets - bench-level preparation, testing, calibration, repair, and reliability support across the region’s inspection technologies (Caliper, MFL, UTWM/UTCD, and EMAT), the tracking and locating equipment that supports every mobilization (AGM units, toolmounted transmitters, and pig locators) - together with management of the electronics store, tool inventory, consumables, and the component requisitioning that ties it all together. Given the size of WH’s tool fleet and its annual tool-prep volume, this is designed and resourced as a single-incumbent role covering both functions. It shall be noted that PIPECARE has subsidiaries around the world and, although the Electronics Technician reports to the Shop Supervisor, the responsibility of the Electronics Technician is to ensure that all tasks related to the Western Hemisphere are executed according to the plan, corporate standards, and policy approved by the Corporate Office. Job Functions, Responsibilities & Authorities A. Tool Preparation, Testing & Calibration • Follow approved written instructions, schematics, and design specifications to assemble and prepare Caliper, MFL, UTWM/UTCD, and EMAT tools, using test equipment, hand tools, and precision soldering techniques. • Perform electronic assembly, soldering, rework, and inspection in accordance with approved workmanship procedures, ESD-control requirements, and applicable IPC standards. • Perform bench and pull-rig/test-loop calibration of sensors, magnetizers, transducers, odometer wheels, and IMUs against reference standards ahead of every mobilization, in accordance with approved procedures and calibration requirements. • Execute dry-run and pull-test acceptance procedures; a tool is not released until every acceptance criterion is met and signed off. • Conduct pressure testing of external electronics and containers. • Perform final check, calibration, and sign-off on tools prior to mobilization. • Assemble experimental circuitry or prototype builds per engineering instructions for R&D and internal projects. B. Battery & Power Systems • Build, test, and capacity-verify battery packs against run-duration requirements, with margin for delays • Rebuild, rewire, and replace battery packs and individual cells only in accordance with approved procedures, applicable safety requirements, and authorized competency limits. • Monitor pack health and flag batteries approaching end-of-life before they cause a field failure. • Ensure battery packs are handled, packaged, labeled, and documented correctly for every shipment, domestic and cross-border, in accordance with applicable DOT/IATA lithiumbattery transportation requirements and company procedures. C. Tracking & Locating Equipment (AGM, Transmitters & Pig Locators) • Prepare, install, and battery-test tool-mounted tracking transmitters (electromagnetic, acoustic, or magnetic) ahead of every mobilization, confirming signal strength and battery life cover the full expected run duration. • Maintain and pre-run test Above Ground Marker (AGM) units: battery and solar power systems, antenna and geophone accessories, GPS time synchronization, and onboard data storage. • Maintain and battery-test handheld and vehicle-mounted pig locators/receivers used by field crews to track tool progress and pinpoint a stopped or stuck tool. Maintain pig signallers and passing indicators at launch, receive, and key trap locations, including mechanical trigger, battery, and alarm function checks. • Retrieve and back up AGM passage data after each run and provide it promptly to the Data Analysis team in the required format for odometer/IMU correlation. • Troubleshoot and repair faulty tracking equipment returned from the field; hold any unit that fails pre-run acceptance out of service until repaired and re-tested. • Maintain a dedicated inventory of spare transmitters, AGM units, locators, batteries,and antennas sized to WH’s mobilization schedule, so a failed unit never delays a launch. D. Repair, Troubleshooting & Continuous Improvement • Test, troubleshoot, and repair completed tools, field returns, and incoming PCBs in accordance with approved procedures and electronic workmanship requirements. • Perform component-level fault diagnosis using multimeter, oscilloscope, and related diagnostic equipment • Operate drills and other machine tools to fabricate or repair tool components (flaps, connectors, etc.) • Lead or support root-cause analysis on any tool that underperforms or fails in the field, and close out the resulting corrective actions. • Proactively propose improvements to tool-prep processes, test procedures, and store operations. • Maintain failure, repair, and component-replacement history for critical electronic assemblies and use recurring failure data to support preventive maintenance and reliability improvements. E. Electronics Store & Inventory Management • Own the electronics store: components, spares, consumables, tool accessories, small tools, and tracking/locating equipment (transmitters, AGM units, locators). • Receive, inspect, and verify incoming components and materials against purchase orders and packing lists. • Maintain accurate, current inventory records in the company’s ERP or an equivalent tracking system sized to the store. • Organize, label, and store all inventory in a safe, systematic, and easily auditable manner. • Set and monitor minimum/maximum stock levels sized to WH’s actual tool-prep volume, avoiding both stockouts and excess/obsolete stock. • Conduct periodic physical counts and reconcile discrepancies. • Perform cycle counts at the frequency established by company inventory procedures and reconcile discrepancies promptly. • Maintain serial/lot traceability and shelf-life or expiry controls where applicable, and classify critical spares according to their potential impact on mobilization readiness. • Issue components and consumables against tool-prep and repair jobs. • Identify slow-moving, obsolete, or damaged stock and recommend disposition. F. Procurement & Ordering • Identify component, material, and consumable needs proactively – ahead of tool-prep schedules, not reactively. • Source suppliers and obtain quotations for components, spares, and consumables. • Prepare and submit purchase requisitions in line with PIPECARE procurement policy and approved budget; the position does not have independent purchasing or supplier-approval authority unless formally delegated. • Track order status and coordinate delivery timing against tool-prep and mobilization schedules. • Maintain basic supplier records and flag recurring quality, pricing, or lead-time issues. G. Documentation & Reporting • Enter daily activity into the ERP / Tool Prep Report / Activity Register the same day • Maintain calibration certificates and measurement-traceability records for tools, sensors, reference standards, and test instruments; identify and quarantine equipment that is overdue or out of tolerance and escalate any potential impact on completed work in accordance with the applicable procedure. • Download, verify, and back up tool data promptly after every run • Maintain work areas in a neat, tidy, and HSE-compliant manner H. Other • Execute other reasonable tasks in support of Shop/Workshop priorities as they arise. Skills/Experience • College education in Electronics, or equivalent hands-on/apprenticeship experience • Minimum 3–5 years of relevant work experience; prior exposure to in-line inspection (ILI) tools (Caliper, MFL, UTWM/UTCD, EMAT) is a strong plus. • Solid knowledge of electronic instrumentation and measurement. • Good experience in soldering, calibration, and testing of electronic PCBs and equipment. • Working knowledge of inventory/stock management; experience maintaining stock records or running a parts store is a plus - formal supply-chain credentials are not required at this store’s scale. • Comfortable handling basic procurement/requisitioning tasks: obtaining quotations, raising requisitions, and tracking deliveries. • Proficient in Microsoft Excel; comfortable learning the company’s ERP/inventory-tracking system. • Attention to detail, quality focus. • Ability to work effectively under time pressure and changing mobilization priorities while maintaining quality and safety standards. • Familiarity with pipeline pig tracking/locating equipment (EM/acoustic transmitters, AGM units, handheld locators) is a plus – not required to start, but expected to be picked up quickly. • Self-motivated, creative, critical, and curious – genuinely engaged with the work, not just executing instructions. • Valid driver’s license (local supplier pickups / parts runs). • Ability to handle inspection-tool components within company-defined limits; work in a workshop environment; stand/walk for extended periods; use required PPE; and work safely around machinery, batteries, and electrical/electronic equipment.

Location: Kyiv Workplace: onsite Ajax Systems — міжнародна технологічна компанія і найбільший у Європі виробник охоронних систем. Продуктам Ajax довіряють уже понад 4,5 мільйони кінцевих користувачів і 330 тисяч PRO-користувачів у більш ніж 180 країнах. Компанія пропонує комплексні рішення для захисту житлових і комерційних об'єктів різного масштабу. Нині портфоліо Ajax налічує 280 пристроїв для захисту від вторгнення, відеоспостереження, пожежної безпеки та комфорту й автоматизації. Кожного року ми демонструємо кратне зростання як у чисельності команди, так і в кількості користувачів у всьому світі.    Ajax Systems має виробництво повного циклу: від генерації ідей та створення прототипів до масового виробництва та продажу по всьому світу. Кожен департамент закриває певну операційну потребу бізнесу в повній мірі. Фахівці компанії залучені на всіх етапах: від виробничої лінії в Україні до логістичного центру в Польщі, звідки продукцію відправляють дистрибʼюторам по всьому світу.   Зараз ми шукаємо International Operational Procurement Specialist до команди Supply Chain, який/яка відповідатиме за закупівлю товарів і послуг для тестових стендів та взаємодію з постачальниками в Україні, Китаї, США та країнах ЄС. Основні завдання: Здійснювати закупівлі товарів, комплектуючих і послуг для забезпечення потреб у тестових стендах. Взаємодіяти з українськими та міжнародними постачальниками щодо розміщення й супроводу замовлень. Проводити переговори з постачальниками для погодження оптимальних комерційних умов, зокрема цін, термінів оплати та відвантаження. Контролювати виконання замовлень, дотримання погоджених термінів і умов поставок. Опрацьовувати рекламації, випадки браку та гарантійні звернення, організовувати повернення товарів для ремонту або їх заміну. Забезпечувати ефективну комунікацію з постачальниками та внутрішніми командами компанії. Вести закупівельну документацію та підтримувати актуальність інформації щодо замовлень і поставок. Наші очікування: Досвід роботи у сфері закупівель від 6 місяців. Розуміння основних принципів і процесів закупівель, зокрема взаємодії з постачальниками та супроводу замовлень. Досвід проведення переговорів та погодження комерційних умов. Навички контролю виконання замовлень і термінів поставок. Знання англійської мови на рівні B1 або вище для комунікації з міжнародними постачальниками. Уважність до деталей, організованість, відповідальність і розвинені комунікаційні навички. Буде перевагою: Досвід закупівель у виробничих або технологічних компаніях. Досвід взаємодії з міжнародними постачальниками, зокрема з Китаю, США та країн ЄС. Досвід роботи з обліковими системами 1С та/або SAP. Що ми пропонуємо: Можливість розвивати експертизу у сфері закупівель та Supply Chain. Взаємодію з професійною командою та участь у забезпеченні виробничих процесів компанії. Роботу в офісі, облаштованому генератором та бомбосховищем. Офіційне працевлаштування зі стабільною оплатою та всіма гарантіями Дія Сіті резидента. Гнучкий графік без привʼязки до робочих годин. Компенсація навчання. Заняття англійською. Медичне страхування. Комплект системи безпеки Ajax (участь у проєкті бета-тесту — отримання та тестування нових гаджетів до їх релізу). Драйвову команду та zero bullshit culture. Долучайтеся, щоб зробити Made in Ukraine синонімом надійності!

Задачи: — Поддержание оборудования SMT в рабочем состоянии — Поиск и устранение проблем в производственном процессе — Повышение времени безотказной работы оборудования и качества производства Требования: — Знание стандартов IPC-A-610, J-STD-001 — Опыт работы с оборудованием SMT, включая пайку, принтеры пасты, машины pick-and-place, печи оплавления — Навыки диагностики и анализа причин неисправностей — Знание электрических схем, ESD, промышленной сети, калибровки и технических чертежей — Опыт работы с PLC и процедурами LOTO Условия: — Работа в офисе в Сан-Хосе Технологии и инструменты, с которыми предстоит работать: IPC-A-610, SPI, troubleshooting, electrical schematic, ESD, SMT, diagnostic tool, root-cause analysis, PLC, LOTO, solder paste printer, machine vision, calibration, industrial network, J-STD-001, mechanical drawing, electronics, equipment maintenance, pick-and-place, reflow oven.

Location: Dhahran, Saudi Arabia Responsible for delivering theoretical and practical training in mobile crane and heavy equipment operations, ensuring trainees develop the required technical skills, operational competency, and safety awareness. Key Responsibilities Deliver practical and theoretical training in crane and heavy equipment operations. Demonstrate safe operating procedures, equipment inspections, and lifting techniques. Assess trainees' practical skills and provide performance feedback. Ensure compliance with applicable safety standards and operating procedures. Maintain training materials, assessment records, and trainee progress reports. Qualifications & Experience Education: Diploma in Crane Operation, Crane Technology, or a related specialty. Experience: Minimum 4 years of field experience as a mobile crane operator. Preferred Qualification: Bachelor's degree in Engineering or Technical/Trade/Vocational Studies. Technical Skills: Strong knowledge of mobile crane operations, heavy equipment handling, and safety procedures. Certifications: Relevant crane operation, heavy equipment, or trainer certifications are preferred. English-Language Requirements IELTS: 6.0 TOEFL iBT: 60 TOEFL Paper-Based: 498 TOEFL Computer-Based: 171

Location: Makkah, Saudi Arabia; Riyadh, Saudi Arabia; Jeddah, Saudi Arabia; Dammam, Saudi Arabia Job Description The Turbine & Precision Equipment Rigger is responsible for executing highly critical, heavy, and precision lifting operations during power plant turbine outages and industrial maintenance shutdowns. This role demands exceptional technical expertise to safely handle multi-million dollar rotating equipment, gas/steam turbine components, and delicate machinery within tightly restricted spaces. The successful candidate must strictly adhere to engineered lifting plans, maintain zero-compromise safety standards, and display flawless precision under fast-paced outage timelines. Key Responsibilities Rigging Execution: Safely attach, lift, guide, and position heavy turbine components and associated mechanical equipment in strict compliance with approved, engineered lifting plans . Pre-Lift Assessment: Thoroughly review critical technical parameters prior to every lift, including total load weight, exact center of gravity , designated lifting points, travel path clearances, and final landing arrangements. Equipment Management: Select, calculate, and inspect specialized rigging hardware such as synthetic/wire-rope slings, shackles, spreader beams , chain blocks, and specialized lifting accessories. Compliance & Safety Verification: Audit all lifting tackle before use to verify valid identification tags, current inspection status, and Working Load Limits (WLL) . Precision Maneuvering: Expertly guide immense structural loads through highly restricted areas and congested plant environments utilizing controlled mechanical methods and precise signaling. Requirements Experience: Minimum of 3 to 5 years of proven experience as an industrial rigger, with a strong preference for candidates who have completed major turbine outages, power plant shutdowns, or heavy mechanical maintenance . Technical Skills: Comprehensive knowledge of rigging mathematics, center-of-gravity calculations, crane signals, and rigging hardware capacities. Certifications: Valid third-party rigging certifications (such as TUV, Bureau Veritas, Aramco, or equivalents ) are highly preferred. Physical Capability: Ability to work in confined spaces, at heights, and handle the physical demands of 12-hour shifts typical during emergency or scheduled outages. Soft Skills: Strong teamwork orientation, high attention to detail, and a strict commitment to safety protocols.

Location: Dammam, Saudi Arabia; Al Khobar, Saudi Arabia; Riyadh, Saudi Arabia; Jeddah, Saudi Arabia; Al Jubail, Saudi Arabia We are looking for an experienced Sales Executive – Calibration Services with a minimum of 2 year of direct experience in calibration sales within the Saudi market. The ideal candidate should have strong knowledge of calibration services , proven client-facing sales experience, and an established understanding of industrial customers and requirements in Dammam, Khobar, or Riyadh . Key Responsibilities Develop and maintain relationships with existing and potential clients for calibration services . Identify new business opportunities and generate leads within the industrial and Oil & Gas sectors. Promote and sell calibration, instrumentation, electrical testing, and related technical services . Conduct client visits and understand customer technical and commercial requirements. Prepare and follow up on RFQs, quotations, tenders, and commercial proposals . Coordinate with technical teams to provide suitable calibration solutions to clients. Follow up with clients from initial inquiry through quotation, PO/order completion, invoicing, and payment collection . Achieve assigned monthly, quarterly, and annual sales targets. Monitor market trends, customer requirements, and competitor activities. Maintain an updated client database, sales pipeline, revenue reports, and sales forecasts. Identify potential subcontractors and suppliers when required for service execution. Build long-term business relationships and actively develop new accounts. Requirements Minimum 1 year of direct experience in Calibration Sales. Candidates with only general industrial sales experience without direct calibration sales experience will not be considered. Current location or relevant market experience in Dammam, Khobar, or Riyadh . Experience dealing with industrial clients, preferably within Oil & Gas, Petrochemical, Manufacturing, or related sectors . Good understanding of calibration services and related technical requirements. Proven ability to generate leads, develop clients, prepare quotations, and close sales. Strong communication, negotiation, and client relationship management skills. Valid Saudi driving license preferred.

Location: United Kingdom About Huzzle At Huzzle, we connect exceptional talent with top opportunities at leading companies across the UK, US, Canada, Europe, and Australia. Our clients include fast-growing startups, digital agencies, SaaS companies, and tech-enabled businesses across industries such as MarTech, FinTech, EdTech, and eCommerce. Unlike traditional outsourcing agencies, we place you directly with innovative companies where you become a valued member of the team. About the company Our client is a high-growth sales acceleration partner specializing in outsourced sales development and lead generation for complex B2B sectors, including FinTech, HealthTech, and manufacturing. With a focus on the UK, Europe, and North America, the team utilizes a proprietary "Selling at a Higher Level" methodology to help global brands bridge the gap between initial interest and closed-won revenue. By combining native-language expertise with a cutting-edge sales technology stack and AI-driven training tools, they provide scalable SDR solutions that deliver measurable ROI for mid-market and enterprise organizations. The team culture blends start-up energy with enterprise-level maturity, fostering an environment where data-driven insights and consultative selling thrive. They are dedicated to professional development, utilizing a structured competency framework to empower team members to navigate long, high-value sales cycles. For candidates looking to make a tangible impact on global business growth, this company offers a collaborative, performance-oriented environment centered on innovation and sales excellence. Job Type Full-time Job Summary We are seeking a high-energy Sales Development Representative to act as the frontline ambassador for one of the world’s most prestigious brands in medical technology: Siemens. Working within a well-established consultancy with 15 years of sales excellence, you will be responsible for identifying and qualifying opportunities within hospitals and private clinics across the UK. This is an elite opportunity to master a sophisticated sales methodology while representing a global leader in healthcare innovation. Key Responsibilities Conduct approximately 50 targeted outbound calls per day to key decision-makers in the healthcare sector. Consistently generate 10+ high-quality outbound opportunities per month to maintain a healthy sales pipeline. Manage all lead generation activity and data integrity through Salesforce. Execute a strategic outreach process based on established, proven methodologies. Collaborate with senior team members to refine messaging and penetrate complex accounts. Requirements Proven experience in a proactive outbound sales or lead generation role. UK-based with the ability to work standard UK business hours. Exceptional communication skills with a professional, affable, and persuasive phone manner. High level of coachability and a desire to continuously improve sales techniques. A determined mindset with the resilience to thrive in a high-activity environment. Nice to Have Prior experience selling medical equipment or software into the healthcare industry. Familiarity with the NHS and private clinic procurement landscape. Proficiency in using Salesforce for pipeline management. Compensation & Incentives Competitive contractor compensation. £200 incentive when target is achieved. £500 incentive for overperformance against target. Additional performance-based incentives may apply. Benefits 💰 Competitive base salary 🎯 Performance-based incentives (£200 for hitting target; £500 for overperformance) 🌎 Fully remote work environment (Work from anywhere) 🚀 Clear progression paths into Team Lead and Management roles 📈 Long-term stability within a mature, 15-year-old organization 🎓 Access to industry-leading sales training and established processes

Location: Al Jubail, Saudi Arabia We are seeking an experienced Mechanical Technician to support mechanical maintenance activities within a petrochemical environment . Position Overview The Mechanical Technician will be responsible for supporting Mechanical Engineers and carrying out technical maintenance activities on rotating and static equipment , ensuring equipment and mechanical operations are maintained to the required quality standards. Key Responsibilities Assist Mechanical Engineers in the design and maintenance of machinery, products, and equipment . Inspect mechanical equipment and operating systems and carry out necessary corrections and adjustments . Support maintenance activities for rotating and static equipment . Ensure mechanical operations, standards, and controls are maintained at a high level of quality . Provide technical support and guidance to lower-level technicians . Identify and report mechanical equipment issues and support corrective maintenance activities. Work closely with Mechanical Engineers and maintenance teams to ensure reliable equipment operation. Requirements Minimum Diploma in Mechanical Engineering / Mechanical discipline . Minimum 5 years of relevant experience . Strong hands-on experience maintaining rotating and static equipment . Experience in the petrochemical industry is required . Good technical knowledge of mechanical maintenance and equipment. Ability to provide technical support to junior/lower-level technicians. Strong troubleshooting, teamwork, and communication skills.

Location: Jeddah, Saudi Arabia; Riyadh, Saudi Arabia; Al Jubail, Saudi Arabia We are looking for a detail-oriented and dependable Electrical / Mechanical Technician to support our engineering, manufacturing, laboratory, and workshop activities. The successful candidate will be responsible for equipment maintenance, fabrication, assembly, testing, troubleshooting, workshop operations, and supporting project requirements. The role requires strong practical skills, the ability to work from engineering drawings and instructions, and a hands-on approach to solving technical problems. Key Responsibilities Support the management in sourcing and outsourcing CNC machine parts and related components. Perform fabrication and assembly of metallic and non-metallic parts using drawings, sketches, and verbal instructions. Support the realization, assembly, and testing of electrical systems . Support manufacturing, fabrication, assembly, and testing activities for ongoing projects. Perform maintenance of workshop and laboratory equipment and manage materials, tools, and other resources. Liaise with suppliers and contractors regarding the servicing, repair, maintenance, and testing of laboratory and workshop equipment. Manage company assets through equipment and tool tagging . Maintain accurate records of asset movement within laboratory and workshop areas. Maintain up-to-date records of equipment maintenance, inspection, and testing . Assist in sourcing materials, consumables, tools, and equipment required for mechanical laboratories and workshop activities. Evaluate and test new equipment and tools being considered for laboratory and workshop use. Support technical staff in developing laboratory demonstrations, prototypes, and project activities. Maintain laboratory and workshop equipment to ensure efficient changeover between projects and demonstrations. Perform equipment troubleshooting and assist in diagnosing technical problems. Ensure compliance with all applicable HSE requirements, procedures, and safe working practices . Support company outreach activities with partners, customers, and collaborators. Perform other duties assigned by the Head of Department that are appropriate to the role. Requirements DAE / Diploma in Electrical Engineering, Mechanical Engineering, Electromechanical Engineering, or a related technical discipline. Hands-on experience in mechanical fabrication, assembly, maintenance, or electrical work . Ability to understand and work from engineering drawings, sketches, and technical instructions . Good practical knowledge of workshop tools and equipment. Strong troubleshooting and problem-solving skills. Ability to handle multiple tasks and requests in a professional, calm, and organized manner. Good teamwork and communication skills.

Location: Dhahran, Saudi Arabia; Al Jubail, Saudi Arabia; Lusail, Qatar; Karachi, Pakistan; Jamnagar, India; Dubai, United Arab Emirates The Mechanical / Static Equipment Engineer Specialist will lead the mechanical design review, construction support, commissioning, testing, and engineering activities for new shale gas facilities. The role requires extensive experience with static and rotating equipment in oil and gas production facilities, along with a strong understanding of plant operations, process technologies, equipment reliability, and maintenance. The successful candidate will provide technical leadership throughout the project lifecycle, from engineering design and installation to commissioning, startup, operations support, and optimization. The role also requires collaboration with multidisciplinary teams and support for Saudi Aramco's capital investment and business strategy initiatives. Lead mechanical design reviews for new installation and upgrade projects. Develop and review engineering design packages, PFDs, P&IDs, and technical drawings. Provide day-to-day technical support to Operations and Maintenance teams. Troubleshoot static and rotating equipment issues and recommend solutions. Support construction, installation, pre-commissioning, commissioning, and startup activities. Participate in Turnaround & Inspection (T&I) and performance testing activities. Conduct feasibility studies and recommend technical and economic optimization solutions. Lead multidisciplinary teams, prepare technical reports, and support management decisions. Requirements Bachelor’s degree in Mechanical, Chemical, or Petroleum Engineering (Master’s preferred). Minimum 15 years of experience in oil & gas, refinery, petrochemical, or gas processing facilities. Strong experience in static equipment (vessels, exchangers, columns, tanks, reactors). Good knowledge of rotating equipment (pumps, compressors, turbines). Experience in EPC phases: FEED, detailed engineering, construction, and commissioning. Strong knowledge of ASME, API, and TEMA codes and standards. Working knowledge of engineering software (PVElite, CAESAR II, HTRI). Strong communication, leadership, and multidisciplinary coordination skills.

Location: Tashkent, Uzbekistan We are a UAE-based trading company acting as a commercial bridge between Chinese manufacturers and international buyers. Our product portfolio includes padel courts, ball machines, sports equipment, and retractable metal roofing structures. Contracts and invoices are handled through our UAE entity; goods ship directly from China to the end customer worldwide. Our sales team operates from Tashkent and works with buyers across Central Asia, the Middle East, and beyond. The Role You will be the primary commercial driver in our Tashkent office — identifying buyers, building relationships, and closing deals on high-value B2B equipment. This is not an account management role. We need someone who can open doors. What You’ll Do • Prospect and develop new clients: sports clubs, hotels, resorts, developers, distributors, and construction companies • Manage the full sales cycle: outreach → qualification → proposal → negotiation → close • Prepare commercial offers and coordinate with the UAE office on pricing and contracts • Follow up on leads generated through inbound channels and trade directories • Track pipeline and report weekly on activity and forecasted deals •. Manage daily pipeline tasks and execute timely prospect follow-ups • Represent the company at relevant industry events and trade shows when needed Requirements • 2–5 years of B2B sales experience — equipment, construction, sports infrastructure, or import/trading preferred • Proven track record of closing deals, not just generating leads • Strong negotiation skills and commercial instinct • Comfortable working with international clients and cross-border logistics realities • Languages: Russian and/or Uzbek required; English is a strong advantage • Self-starter — this role has autonomy and expects results without hand-holding Nice to Have • Existing network in sports facility development, hospitality, or construction • Experience working with Chinese-sourced products or import/export deals • Familiarity with CRM tools Benefits • Base salary + uncapped commission on closed deals • Work from a growing company with a lean, international team • Real ownership over your pipeline and results • Opportunity to grow with the business as the Tashkent office expands

Location: Al Jubail, Saudi Arabia Eram Talent is seeking experienced professionals to conduct Heavy Equipment Assessments. As a global Talent Acquisition Consultancy, Eram Talent is committed to providing outstanding recruitment and certification solutions across various industries. The assessor will be responsible for evaluating the competencies of heavy equipment operators to ensure compliance with industry standards and safety requirements. Key Responsibilities Conduct thorough assessments of heavy equipment operators’ competencies, including practical and theoretical evaluations. Ensure assessments adhere to company policies and regulatory standards. Maintain accurate records of assessment results and provide detailed reports. Provide constructive feedback to operators to help improve their skills and safety practices. Collaborate with the training team to assist in the development and updating of assessment materials. Assist in quality assurance and compliance audits related to operator competency. Requirements Minimum of 3 years experience operating heavy equipment. Minimum of 5 years Industrial experience of specific role. 3 years of experience as instructor/teacher. Academic and Professional Qualifications (minimum) Technical qualifications or diploma in the relevant craft/subject. Certified in specific area of expertise: Heavy Equipment (Backhoe- Bulldozer- Forklift- Wheel loader- Backhoe loader- … etc, Cranes, and/or Rigging. Knowledge of Training/Assessment development would be an advantage. Previous experience in assessment or evaluation roles preferred. Strong knowledge of heavy equipment operation including Backhoe, Bulldozer, Forklift, Grader, Wheel loader, Skid loader, Backhoe loader, Sideboom, and Telehandler. Familiarity with industry safety standards and certification processes. Excellent communication and organizational skills. Ability to provide clear, constructive feedback and maintain professionalism during assessments. Relevant certifications or qualifications in heavy equipment operation and assessment are preferred. Benefits Salary is not a constraint ,company is looking for right candidate .

Location: Dammam, Saudi Arabia Eram Talent is seeking experienced professionals to conduct Heavy Equipment Assessments. As a global Talent Acquisition Consultancy, Eram Talent is committed to providing outstanding recruitment and certification solutions across various industries. The assessor will be responsible for evaluating the competencies of heavy equipment operators to ensure compliance with industry standards and safety requirements. Key Responsibilities Conduct thorough assessments of heavy equipment operators’ competencies, including practical and theoretical evaluations. Ensure assessments adhere to company policies and regulatory standards. Maintain accurate records of assessment results and provide detailed reports. Provide constructive feedback to operators to help improve their skills and safety practices. Collaborate with the training team to assist in the development and updating of assessment materials. Assist in quality assurance and compliance audits related to operator competency. Requirements Minimum of 3 years experience operating heavy equipment. Minimum of 5 years Industrial experience of specific role. 3 years of experience as instructor/teacher. Academic and Professional Qualifications (minimum) Technical qualifications or diploma in the relevant craft/subject. Certified in specific area of expertise: Heavy Equipment (Backhoe- Bulldozer- Forklift- Wheel loader- Backhoe loader- … etc, Cranes, and/or Rigging. Knowledge of Training/Assessment development would be an advantage. Previous experience in assessment or evaluation roles preferred. Strong knowledge of heavy equipment operation including Backhoe, Bulldozer, Forklift, Grader, Wheel loader, Skid loader, Backhoe loader, Sideboom, and Telehandler. Familiarity with industry safety standards and certification processes. Excellent communication and organizational skills. Ability to provide clear, constructive feedback and maintain professionalism during assessments. Relevant certifications or qualifications in heavy equipment operation and assessment are preferred. Benefits Salary is not a constraint ,company is looking for right candidate .

Location: Jakarta Workplace: remote CSM Indonesia is looking for self-motivated and skilled seafarers to join our expanding offshore fleet of Columbia Shipmanagement.    JOB DESCRIPTION & QUALIFICATION   Operate cable engines, linear cable machines, turntables, tensioners, winches, and associated deck equipment Monitor cable tension, speed, and alignment during laying, burial, and recovery operations Assist with loading, splicing, testing, and maintenance of subsea cables Perform routine inspections, basic troubleshooting, and preventive maintenance of equipment Requires technical skill, strong safety awareness, and the ability to work in challenging offshore environments to ensure cable operations are carried out accurately and  safely Holder of valid STCW certifications required for the position Experience with multicultural working environment. Good communication and skills of English language. Safety culture and mindset.   VESSEL'S SPECIFIC REQUIREMENTS   Minimum experience requirements of 3 years on Cable Layers / Pipe / MPSV/ DSV vessels at least 1 - 1.5 years’ experience in Carousal operating     CONTRACT TERMS & CONDITIONS   Contract Duration [9 months +/- 1 months] Contract Benefit: competitive salary Terms and condition as per CBA applicable Free Internet onboard and wellbeing support   You may include with your application any reference, specific job qualification, and your availability date.   Looking forward to welcoming you in the Columbia Group Family.

Location: Dammam, Saudi Arabia; Al Khobar, Saudi Arabia Eram Talent is seeking a knowledgeable and experienced Heavy Equipment Trainer / Assessor to join our dynamic team. The Assessor is responsible for the development, implementation, reporting and analysis of all certifications as assigned. He/She will be a part of the Certification Team the HE Assessor will ensure that the written/performance sections of the certifications are developed and maintained as per the company policy for the following disciplines; Rigging, Crane Operator and Heavy Equipment Operator (Backhoe- Bulldozer- Forklift- Grader- Wheel loader- Skid loader- Backhoe loader- Sideboom Telehandler… etc) Key Responsibilities Perform the following assessments to make sure about the operator’s competency: - Heavy Equipment assessment (Backhoe- Bulldozer- Forklift- Grader- Wheel loader- Skid loader- Backhoe loader- Sideboom Telehandler… etc). - Crane assessment. - Rigger assessment. Assist to develop written and practical assessments in their field of expertise. Ensure that all assessments are completed efficiently and professionally. Complete the analysis of all assessments. Take on Mentoring responsibilities as required. Assist with QA Audits. Assist with Policy and Procedural reviews and development. Uphold the companies HE Certifications Unit Policy. Requirements Minimum of 5 years of experience operating heavy equipment. Proven experience in training or assessment roles, preferably in the heavy equipment or construction industry. Experience in training areas such as Backhoe- Bulldozer- Forklift- Wheel loader- Backhoe loader, cranes etc Valid certifications and licenses for operating heavy machinery. Strong knowledge of safety regulations and operational procedures related to heavy equipment. Excellent communication and presentation skills. Ability to evaluate and provide constructive feedback to trainees. Strong organizational skills and attention to detail.

Location: Dammam, Saudi Arabia Eram Talent is on the lookout for a knowledgeable and driven Sr. Static Equipment Engineer to join our esteemed team in Saudi Arabia. With a strong presence in the oil and energy sector, our consultancy firm is dedicated to connecting top-tier talent with industry-leading organizations. In this senior role, you will be responsible for the design, evaluation, and maintenance of various static equipment, including pressure vessels, heat exchangers, and storage tanks. You will lead engineering projects, providing technical expertise and guidance to ensure compliance with regulatory standards and operational efficiency. Your contributions will be essential in enhancing equipment reliability and performance, while also mentoring junior engineers and fostering a culture of excellence within the team. Requirements Bachelor's degree in Mechanical Engineering or a related field; a Master's degree is highly preferred. At least 15 years of relevant experience in static equipment engineering within the oil and gas industry. Strong knowledge of engineering codes and standards such as ASME, API, and NACE, along with practical experience in their application. Proficiency in design and analysis software including PVElite, CEASER, and AutoCAD. Demonstrated ability to manage engineering projects and provide solutions for equipment optimization and reliability. Exceptional problem-solving and analytical skills, with a focus on innovation in engineering practices. Excellent communication skills and ability to work effectively in a team-oriented environment. Fluency in English is mandatory; Arabic proficiency is an advantage. Commitment to upholding health, safety, and environmental standards. Experience in mentoring and developing less experienced engineers is highly valued.

Location: Dhahran, Saudi Arabia Eram Talent, a leading Talent Acquisition Consultancy operating in the oil and energy sector, is seeking a highly experienced Senior Rotating Equipment Engineer to join our team in Saudi Arabia. In this role, you will be responsible for the analysis, design, and maintenance of various rotating equipment, playing a critical role in ensuring optimal performance, reliability, and safety standards. As a Senior Engineer, your duties will include developing and implementing maintenance strategies, performing root cause analyses on equipment failures, and ensuring compliance with local and international industry standards. You will collaborate closely with engineering, operational, and maintenance teams to drive improvements and innovation in equipment reliability. This is an exciting opportunity to lead projects and make significant contributions in a dynamic environment where your expertise in rotating machinery will be highly valued. If you are driven by challenge and eager to leverage your skills in a forward-thinking company, we encourage you to apply. Requirements Bachelor's degree in Mechanical Engineering or a related field A minimum of 10 years of experience in rotating equipment engineering within the oil and energy sector Deep knowledge of the design, operation, maintenance, and troubleshooting of rotating machinery, including pumps, turbines, and compressors Strong familiarity with industry standards and regulatory compliance Highly developed analytical and strategic problem-solving skills Excellent communication and teamwork abilities Prior experience in leading projects or teams is a plus Fluency in English is required; Arabic language skills are a plus

Location: Dammam, Saudi Arabia; Riyadh, Saudi Arabia; Delhi, India Eram Talent, a prominent Talent Acquisition Consultancy within the oil and energy sector, is searching for a skilled Senior Rotating Equipment Engineer to join our team in Saudi Arabia. In this pivotal role, you will leverage your extensive experience to ensure the reliability and efficiency of rotating machinery, including pumps, compressors, turbines, and other critical equipment. Your expertise will be instrumental in developing and implementing maintenance strategies, conducting performance analysis, and ensuring compliance with industry standards and safety regulations. You will work closely with multidisciplinary teams to foster innovation and drive continuous improvement in equipment performance and overall operational efficiency. This position offers a unique opportunity to contribute to high-impact projects and collaborate with industry professionals in a dynamic and challenging environment. If you are a proactive and results-oriented engineer passionate about improving rotating equipment performance, we want to hear from you. Requirements Bachelor's degree in Mechanical Engineering or a related field Minimum of 10 years of relevant experience, with a focus on rotating equipment in the oil and energy sector Proven experience in the design, operation, maintenance, and troubleshooting of rotating machinery Strong understanding of relevant industry standards and regulations Excellent analytical and problem-solving skills Exceptional communication and interpersonal skills to collaborate effectively with teams Project management experience is a plus Fluency in English; knowledge of Arabic is advantageous Benefits Salary is not a constraint ,company is looking for right candidate .