Вакансии

Velaura is looking for an RTL Engineer to design and optimize memory-subsystem RTL and integrate memory controllers and PHYs.

Location: Greece Workplace: OnSite DESCRIPTION ROLE HIGHLIGHTS - Subsystem Assembly Technician - Location: Athens, Greece - Department: Global Manufacturing Organisation - Reports to: Production Facility Manager - Employment type: Permanent - Workplace model: Office - Employment is subject to applicable security screening (incl. SUPO, where required) WHY THIS ROLE MATTERS: The mission of this role is to ensure every mechanical subsystem delivered for satellite integration works exactly as intended by inspecting, assembling and validating it with clear, reliable evidence. It also exists to catch issues early, fix them at the source and keep the entire build process traceable and unblocked so spacecraft can be assembled and launched with confidence. WHO WE ARE ICEYE delivers space-based intelligence, surveillance, and reconnaissance (ISR) capabilities to governments and allied nations. This includes sovereign and turnkey ISR missions leveraging ICEYE’s world-leading synthetic aperture radar (SAR) satellite technology, as well as access to data from the world’s largest SAR satellite constellation. These capabilities enable partners to detect and respond to critical changes anywhere on Earth with unprecedented speed and accuracy – day or night and in any weather, supported by ultra high-resolution imagery and high-frequency revisits. As a trusted partner for defense, intelligence, security, and maritime domain awareness, ICEYE’s near real-time data creates a tactical advantage for mission-critical operations. Designed for dual use, the platform also serves civil protection and commercial users for natural-catastrophe intelligence, insurance, maritime monitoring (including oil-spill detection), and finance, contributing to global security and community resilience. ICEYE is headquartered in Finland and operates globally across Europe, North America, the Middle East, and Asia-Pacific. We have more than 900 employees, united by a shared vision: improving life on Earth by becoming the global source of truth in Earth Observation. YOUR DAY-TO-DAY RESPONSIBILITIES - Your Day-to-day Responsibilities - Perform inspection, assembly, and verification of mechanical subsystems and panel-level assemblies - Integrate structural elements including CFRP panels, sandwich structures, and mechanical components - Execute panel assembly, including module installation and routing of wiring harnesses (RF, CAN, power, thermal sensors) - Ensure subsystem readiness (e.g. antennas, solar panels) through testing and validation procedures - Collaborate with Engineering, AIT, and Quality teams to resolve integration issues and improve manufacturability - Monitor production progress and proactively escalate blockers to maintain workflow continuity - Support root cause analysis and non-conformance resolution - Contribute to First Article Inspection (FAI) activities and ensure proper documentation and traceability - Perform or support incoming inspection of mechanical and structural components - Maintain accurate records in line with aerospace manufacturing and quality standards REQUIREMENTS: MUST HAVES - Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or a related technical field - 1+ years of hands-on experience in mechanical assembly, inspection, or integration within aerospace or other high-reliability environments - Proven experience working with mechanical subsystems and structural assemblies (e.g. panels, brackets, electro-mechanical units) - Hands-on experience with composite materials (e.g. CFRP), sandwich structures, solar panels, or precision mechanical components - Experience with panel-level integration, including module installation and wiring harness routing/handling - Basic understanding of electrical integration principles, including connectors, grounding, and cable types (RF, CAN, power, thermal sensors) - Familiarity with manufacturing quality standards, documentation, and traceability requirements - Experience supporting root cause analysis and non-conformance resolution - Comfortable working in a fast-paced production environment with evolving priorities and deadlines - Hands-on mindset with willingness to work on the shop floor and support cross-functional teams directly - Strong communication skills and ability to collaborate with Production, Engineering, QA, and Planning - High level of ownership, attention to detail, and continuous improvement mindset NICE TO HAVES - Experience with satellite structures and panel integration, including CFRP panels, sandwich constructions, and RANT assemblies - Hands-on experience with full panel assembly, including integration and routing of RF, CAN, power, and thermal sensor cabling - Understanding of thermal management and interfaces (e.g. thermal pads, pastes, sensor integration) - Experience with incoming inspection of composite and machined parts - Knowledge of environmental and mechanical testing (e.g. vibration, shock, thermal vacuum) - Familiarity with aerospace standards such as IPC, ECSS, or similar - Experience in NewSpace or small satellite production environments - Experience working in cleanroom environments and satellite integration flows - Familiarity with ERP/MES systems in manufacturing APPLICATION PROCESS - Talent Acquisition Interview - Hiring Manager General Interview - Technical Interview (onsite or virtual), including a Technical Challenge - Hiring Team Interview - Offer Decision WORKING AT ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. HOW WE WORK (OUR VALUES) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. BENEFITS Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us - we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Canada; United States We offer full relocation support, including immigration assistance. You may work remotely at first while your immigration process is being completed. Long-term, the role will transition to onsite work in Montreal. Role overview: We are seeking a Satellite Bus System Engineer to design structural, thermal, power distribution, attitude control, propulsion, CD&H, TT&C/PDT, FSW and interface architecture that supports payloads and mission-operations for current and next-generation remote sensing and communications satellites. The role leads the definition, design, integration, verification and on-orbit support of the platform subsystems, ensuring compliance to mission requirements and company best-practice processes. Tasks summary: Architecture Concept & Requirements • Translate mission‑level requirements (CONOPs, mass, volume, power, envelope, pointing, lifetime, redundancy, reliability…etc.) into system requirements and allocate them to platform subsystems (structures, TCS, EPS, GNC, PROP, C&DH, TT&C/PDT, FSW). • Develop the Platform Architecture Description Document, Interface Control Documents (ICD) and Design Description. • Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Concept Trade & Feasibility • Lead trade studies for structural approach, thermal control concepts (MLI, heat pipes, radiators…etc.), power generation options (e.g. solar array & battery technologies). Detailed Design • Oversee detailed design of all major subsystems (structures, TCS, EPS, PROP, C&DH, C&T, GNC, payload interfaces). • Conduct failure‑mode‑effects‑analysis (FMEA) in support to FDIR, fault‑tree analysis and reliability & availability predictions. • Ensure compliance with mission requirement and payload specifics. • Maintain platform level performance budgets • Support FSW and Satellite Reference Database developments Cross‑Functional Coordination, Stakeholder & Program Interaction • Present technical status, risk analyses, and trade‑study results to senior management. • Negotiate and maintain ICDs with payload and all platform subsystems. • Support to DC & RF harness design, Platform and Payload layout. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Author verification plans, test matrices, and validation procedures for unit, subsystem, and platform level tests. • Coordinate, supervise or support: o  Structural vibration, acoustic & shock testing o TCT & Thermal vacuum testing o  Power distribution functional test o  Closed‑loop test on avionic testbed • Support FSW integration Technical Leadership & Mentorship • Mentor, guide, lead a multidisciplinary team of junior or intermediate system engineers & interns • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to company's knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Maintain platform‑wide standards (structural margin, thermal‑control, power‑bus architecture, redundancy philosophy…etc.). • Ensure all artefacts, analysis, software, documentations and deliverables are version controlled in PLM environment. • Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation Launch‑Site, On‑Orbit & Operations Support • Support launch‑site interface checklists with LVI responsible engineer, pre‑launch checkout procedures, and early‑orbit checkout scripts. • Provide real‑time platform engineering support during launch, on‑orbit commissioning, anomaly investigations and contingency operations. • Support SOOH development and associated operator training. Required Qualifications: · B.Sc. in Electrical Engineering, Aerospace or Physics with 10 + years of system design experience on LEO/MEO/GEO platforms. · Deep knowledge of spacecraft bus subsystems and their interactions. · Experience with power‑electronics design and high‑precision attitude‑control hardware. · Strong understanding of aerospace system engineering fundamentals · Hands-on individual who can support systems integration processes and capability to test systems and resolve problems · Experience with Confluence and JIRA · Demonstrated capability to efficiently work with little supervision · Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity · Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Montreal, Canada Tasks summary: Architecture Concept & Requirements • Translate mission‑level requirements (CONOPs, mass, volume, power, envelope, pointing, lifetime, redundancy, reliability…etc.) into system requirements and allocate them to platform subsystems (structures, TCS, EPS, GNC, PROP, C&DH, TT&C/PDT, FSW). • Develop the Platform Architecture Description Document, Interface Control Documents (ICD) and Design Description. • Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Concept Trade & Feasibility • Lead trade studies for structural approach, thermal control concepts (MLI, heat pipes, radiators…etc.), power generation options (e.g. solar array & battery technologies). Detailed Design • Oversee detailed design of all major subsystems (structures, TCS, EPS, PROP, C&DH, C&T, GNC, payload interfaces). • Conduct failure‑mode‑effects‑analysis (FMEA) in support to FDIR, fault‑tree analysis and reliability & availability predictions. • Ensure compliance with mission requirement and payload specifics. • Maintain platform level performance budgets • Support FSW and Satellite Reference Database developments Cross‑Functional Coordination, Stakeholder & Program Interaction • Present technical status, risk analyses, and trade‑study results to senior management. • Negotiate and maintain ICDs with payload and all platform subsystems. • Support to DC & RF harness design, Platform and Payload layout. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Author verification plans, test matrices, and validation procedures for unit, subsystem, and platform level tests. • Coordinate, supervise or support: o  Structural vibration, acoustic & shock testing o TCT & Thermal vacuum testing o  Power distribution functional test o  Closed‑loop test on avionic testbed • Support FSW integration Technical Leadership & Mentorship • Mentor, guide, lead a multidisciplinary team of junior or intermediate system engineers & interns • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to company's knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Maintain platform‑wide standards (structural margin, thermal‑control, power‑bus architecture, redundancy philosophy…etc.). • Ensure all artefacts, analysis, software, documentations and deliverables are version controlled in PLM environment. • Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation Launch‑Site, On‑Orbit & Operations Support • Support launch‑site interface checklists with LVI responsible engineer, pre‑launch checkout procedures, and early‑orbit checkout scripts. • Provide real‑time platform engineering support during launch, on‑orbit commissioning, anomaly investigations and contingency operations. • Support SOOH development and associated operator training. Required Qualifications: · B.Sc. in Electrical Engineering, Aerospace or Physics with 10 + years of system design experience on LEO/MEO/GEO platforms. · Deep knowledge of spacecraft bus subsystems and their interactions. · Experience with power‑electronics design and high‑precision attitude‑control hardware. · Strong understanding of aerospace system engineering fundamentals · Hands-on individual who can support systems integration processes and capability to test systems and resolve problems · Experience with Confluence and JIRA · Demonstrated capability to efficiently work with little supervision · Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity · Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Espoo Workplace: OnSite Role highlights: - Location: Espoo, Finland - Department: Production Finland - Reports to: Yogesh Yadav - Employment type: Permanent - Workplace model: Onsite - Employment is subject to applicable security screening (incl. SUPO, where required) Why this role matters: We are looking for a Senior Mechanical & Thermal Production Technician to strengthen our satellite production operations as we scale toward standardized, repeatable, high-volume manufacturing. In this hands-on role, you will independently execute complex assembly, subsystem integration, and thermal verification testing following detailed work instructions and AIT procedures. You will act as a technical anchor for your assigned production area, ensuring workstation readiness and driving frontline troubleshooting alongside Specialists and AIT Engineering. We seek a proactive technical leader who takes full ownership of build activities, models high standards of quality and ESD compliance, and coaches technicians to elevate team capabilities and process stability. Who We Are ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. Your day-to-day responsibilities   - Perform and support mechanical assembly, integration, and testing of precision, high-value hardware. - Take ownership of day-to-day technical readiness in your assigned production area, including tools, fixtures, work instructions, and workstation setup. - Provide practical guidance, troubleshooting support, and on-the-job coaching to technicians, helping them build confidence and independence. - Collaborate with Senior Technician, Production Line Owners, and AIT Engineering to investigate root causes and implement corrective actions for build issues and non-conformances (NCs). - Identify bottlenecks, recurring defects, unnecessary handling, and sources of rework; work with the team to implement improvements and check their effectiveness. - Apply Lean and 6S principles to create safe, organized, ergonomic, and efficient workstations. - Review and refine work instructions, travelers, and checklists to capture redlines and improve procedural clarity and manufacturability. - Support the transition from prototype and low-volume builds to repeatable production by capturing lessons learned and helping establish reliable processes. - Improve throughput while protecting safety, quality, and a sustainable working pace. Raise capacity or workload concerns early and help address their underlying causes. - Build support for process changes by involving the people doing the work, explaining the reasons, and incorporating their feedback. - Work with engineering and quality teams to resolve production issues and introduce process changes through the appropriate review and approval steps. What we’re looking for Must haves: - At least 3 years of hands-on experience in mechanical assembly, integration, or production, with demonstrated ability to work independently on complex hardware. - Experience in a quality-critical or complex manufacturing environment, such as space, aerospace, automotive, robotics, or industrial automation. - Demonstrated ownership of a production activity, workstation, or technical problem, including coordinating support and following actions through to completion. - Working knowledge of Lean manufacturing and 6S, supported by practical examples of improving workstation organization, workflow, or standard work. - Hands-on experience with rework and repair of aerospace mechanical structures, including aluminum components and helicoil (threaded insert) installation and replacement. - Confident use of precision hand tools, torque tools, and measuring equipment, with the ability to interpret mechanical drawings, tolerances, and work instructions. - A solid practical understanding of mechanical assemblies, fastening methods, alignment, and safe hardware handling. - Experience coaching technicians and collaborating with experienced peers, with a clear, respectful, and practical communication style. - Ability to learn production processes quickly, identify improvement opportunities, and turn them into workable solutions with the team. - A mindset focused on repeatability, documentation, and knowledge sharing as production scales. - Willingness and ability to work onsite in Espoo in production and integration environments. - Collaborates with stakeholders to complete the tasks - A mindset to adapt quickly with the fast paced environment of ICEYE. Nice to haves: - Experience with satellite or spacecraft mechanical assembly, integration, or testing. - Experience helping a team transition from prototype or low-volume builds to standardized, higher-volume production. - Experience creating or improving work instructions, visual standards, training materials, or workstation layouts. - Familiarity with structured problem-solving and root-cause analysis, including Six Sigma tools. - Basic knowledge of electronics or mechatronics. - Experience transferring production processes or sharing best practices across multiple sites Application Process - Recruiter Interview - Hiring Manager Interview - Task - Final Interview WORKING AT ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. How We Work (Our Values) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. Benefits Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Sainte-Anne-de-Bellevue, Canada 📍 Location: Sainte-Anne-de-Bellevue, QC, Canada (West Montreal) 📄 Employment Type: TBD 🏢 Work Arrangement: Remote opportunities for U.S. and Canadian citizens; relocation assistance and bonus available for qualified UK and European candidates relocating to Canada 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Remote & Relocation Opportunities U.S. and Canadian Citizens: Remote work arrangement available. UK and European Candidates: Relocation assistance and a relocation bonus are available for qualified candidates willing to relocate to Canada. Candidates should be prepared to collaborate with multidisciplinary spacecraft engineering teams, customers, partners, and suppliers. Important Screening Requirements Bachelor’s degree in Electrical Engineering, Aerospace Engineering, or Physics . 10+ years of electrical design engineering experience on LEO, MEO, or GEO spacecraft missions. Experience with spacecraft-level and unit-level electromagnetic compatibility (EMC) requirements and simulations . Experience leading EMC engineers or multidisciplinary engineering task forces. Strong understanding of aerospace systems engineering fundamentals. Hands-on experience supporting systems integration, testing, and troubleshooting. Experience with Confluence and JIRA . Strong analytical, problem-solving, and technical communication skills. Excellent written and verbal communication skills in English. French is an asset but is not required. About the Role We are seeking an experienced Spacecraft EMC Systems Engineer to lead electromagnetic compatibility architecture, analysis, electrical design reviews, and verification activities for spacecraft systems. The role focuses on defining EMC requirements, evaluating electrical and electromagnetic interactions across spacecraft subsystems, overseeing EMC testing, and coordinating with multidisciplinary engineering teams, customers, partners, and suppliers. The successful candidate will provide technical leadership throughout the spacecraft development lifecycle, from early design and requirements definition through integration, verification, and on-orbit anomaly support. What We’re Looking For We’re looking for a technically strong and hands-on EMC engineering professional with extensive spacecraft electrical design experience and the ability to lead complex electromagnetic compatibility activities. The ideal candidate can define EMC architectures, assess conducted and radiated emissions and susceptibility, recommend mitigation strategies, oversee verification testing, and resolve cross-subsystem electromagnetic issues. Strong candidates will combine deep technical expertise in spacecraft EMC with engineering leadership, sound judgment, and the ability to communicate technical risks and solutions to multidisciplinary teams and stakeholders. Key Responsibilities EMC Architecture, Concepts & Requirements Capture, allocate, and maintain traceability of EMC functional, performance, and technical requirements. Define spacecraft EMC architecture, including: Shielding strategies Grounding schemes Antenna placement Mode control Harness segregation and routing constraints Ensure EMC requirements are considered throughout spacecraft design and development. Identify potential electromagnetic compatibility risks early in the design lifecycle. EMC Analysis & Electrical Design Perform spacecraft-level EMC analyses, accounting for payload-specific requirements, including: Radiated and conducted emissions Radiated and conducted susceptibility Antenna coupling Shielding effectiveness Fuse blowing Verify EMC compliance early in the design cycle and recommend mitigation measures. Apply shielding, filtering, grounding schemes, and layout rules to address EMC/EMI concerns. Review DC power distribution architecture, including primary and secondary buses, converters, fusing, and protection, for EMC/EMI considerations. Review conductors, terminations, connectors, and backshells to ensure materials, gauges, and shielding meet EMI control requirements. Cross-Functional Coordination & Program Support Communicate technical status, risk assessments, and trade-study results to senior management, customers, and partners. Support Interface Control Documents (ICDs) with payload and platform teams and suppliers. Serve as the EMC authority during system and subsystem design reviews . Coordinate with RF, Power, Structures, Propulsion, Software, and Ground Segment teams to resolve cross-disciplinary EMC issues early. Support business development and proposal activities during Phase 0 and pre-Phase A. Collaborate with engineering teams and external suppliers to maintain EMC compliance across spacecraft subsystems. Integration, Verification & Testing Develop the EMC Verification Master Plan covering component-level, subsystem-level, and full-spacecraft testing. Define verification activities for: Conducted emissions and susceptibility (CE/CS) Radiated emissions and susceptibility (RE/RS) Oversee test facility setup, instrumentation calibration, test execution, data reduction, and results certification. Author test procedures and define acceptance criteria. Lead CE/CS and RE/RS testing on hardware. Review supplier test results and verify compliance with EMC requirements. Support systems integration, troubleshooting, and resolution of EMC-related issues. Technical Leadership & Mentorship Mentor junior engineers and interns. Provide EMC training sessions and technical guidance. Serve as a technical liaison with customers, partners, and external vendors. Coordinate multidisciplinary engineering activities and help resolve complex technical challenges. Contribute to continuous improvement initiatives, internal knowledge bases, process enhancements, and standards development. Configuration, Documentation & Standards Management Participate in Change Control Boards (CCBs) and ensure impact analyses are conducted for electrical changes. Maintain GDIR and streamline EDTS processes. Ensure analyses, technical artifacts, and documentation are version-controlled within the Product Lifecycle Management (PLM) environment. Support spacecraft design reviews, including: System Requirements Review (SRR) Preliminary Design Review (PDR) Critical Design Review (CDR) Manufacturing Readiness Review / Test Readiness Review (MRR/TRR) Support technology roadmapping and innovation activities. On-Orbit & Operations Support Support root-cause investigations of on-orbit anomalies. Update design baselines and document lessons learned following anomaly investigations. Support development of the Spacecraft Operations and User Handbook (SOOH) . Contribute to related operator training and operational readiness activities. Required Qualifications Bachelor’s degree in Electrical Engineering, Aerospace Engineering, or Physics ; a Master’s degree is preferred. 10+ years of electrical design engineering experience on LEO, MEO, or GEO missions. Proficiency in spacecraft-level and unit-level EMC requirements and simulations. Experience supervising EMC engineers or leading multidisciplinary task forces. Strong understanding of aerospace systems engineering fundamentals. Hands-on experience supporting systems integration, testing, and troubleshooting. Experience with Confluence and JIRA . Ability to work independently with minimal supervision. Strong analytical and problem-solving skills, including the ability to simplify complex problems and solve them through analysis, similarity, or creative approaches. Excellent written and verbal communication skills in English. Preferred Qualifications Master’s degree in a relevant engineering or physics discipline. Knowledge of French. Experience working with multidisciplinary spacecraft engineering teams, customers, partners, and external suppliers. Experience leading spacecraft EMC design reviews, verification activities, and cross-functional technical investigations.

Нужен специалист, который будет отвечать за AI-направление, в первую очередь — поведение зомби: проектирование, реализацию и поддержку игровых AI-систем. - Опыт участия в коммерческих игровых проектах на Unreal Engine 5;

Нужен специалист, который уверенно работает с UE5 C++, понимает архитектуру gameplay-систем и умеет писать решения, которые можно поддерживать, расширять и переиспользовать. • Опыт участия в коммерческих игровых проектах на Unreal Engine 5;

Location: Valencia Workplace: OnSite Role highlights: - Title: Satellite Systems Senior Technician - Department: Global Manufacturing Organisation - Reports to: Head of MAITE Spain - Location: Valencia, Spain - Type of Contract: Permanent - Working model: On-site - Employment is subject to applicable security screening (incl. SUPO, where required) Why this role matters: As a Satellite Systems Senior Technician, you play a vital role in bringing every satellite that reaches our Valencia production line to operational readiness. You will own the first power-on, initial software and firmware loading, and end-to-end systems verification of fully integrated SAR satellites, running automated functional, power, and bus test campaigns, diagnosing issues at the boundary between software, firmware, and electronics hardware, and ensuring configuration control on final activities. Your work lets test campaigns run independently on the line, without pulling engineers away from other teams.   Who We Are ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. Your day-to-day responsibilities - Execute initial satellite power-on, firmware flashing, and subsystem communication verifications. - Run, debug, and execute automated functional, power, and bus test scripts using Python, Shell, and Linux environments. - Work with Git repositories to manage test code, track updates, and verify software builds. - Operate mechanical and electrical ground support equipment (GSE), and troubleshoot electronic hardware, power distribution, and digital interface issues using lab instruments (oscilloscopes, power supplies, multimeters). - Diagnose whether an anomaly is a test setup issue or a genuine unit fault, and raise non-conformance reports (NCRs) in Jira. - Maintain detailed test logs and accurate documentation, and ensure configuration control on final activities. - Assist in managing activities related to satellite launch campaigns. - Actively contribute to continuous improvement initiatives - procedures, processes, tools, test automation, and 6S. - Assist in training and mentoring junior technicians, and communicate proactively with team members and supervisors regarding any challenges or obstacles. - Work closely with the RF Senior Technician, AIT Engineering, and Quality, ensuring clear communication so that satellite build-phase deadlines and technical specifications are met.   What we’re looking for Must haves: - Relevant university degree in Aeronautical Engineering, Space Studies, Applied Physics, Electronics, or similar, or equivalent hands-on experience in a related role. - 4+ years of hands-on experience setting up, debugging, and running real test benches and satellite systems or interfaces, not just executing someone else’s scripts. - Proficient in a Linux environment, comfortable modifying and debugging Python scripts, and working with Git. - Systems thinking across avionics, power, and software, enough to tell a test setup fault from a genuine unit fault. - Experience using lab equipment such as power supplies, multimeters, and oscilloscopes. - Excellent communication skills, with particular attention to detail in procedures, preparation, and execution. - Ability to read and interpret technical drawings, assembly instructions, and schematics. - Proficient in English, both written and spoken, to ensure clear communication in a cross-functional environment. Nice to haves: - ICEYE-specific test frameworks, satellite bus specifics, Jira and MES flow, and launch campaign procedures. - Space or satellite AIT (Assembly, Integration, and Testing) background. - Experience with environmental testing (e.g. vibration/shaker rigs, thermal testing). - Experience using Atlassian Cloud (Jira, Confluence). - Lean & Six Sigma experience.   Application Process - Talent Acquisition Interview - Hiring Manager General Interview - Technical Interview, including a Technical Challenge - Final Interview   Working at ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win.   How We Work (Our Values) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. Benefits Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process.   Our Commitment to Diversity, Equity, and Inclusion We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Bellevue, United States 📍 Location: Bellevue, WA 📄 Employment Type: 6-Month W-2 Contract | Potential for Full-Time Conversion 🏢 Work Arrangement: Hybrid — 3 Days/Week On-Site 🗓️ Schedule: Monday–Friday 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Important Screening Requirements Must be a U.S. Person — U.S. Citizen or U.S. Permanent Resident (Green Card holder) . Must be able to work on-site in Bellevue, WA, 3 days per week . Strong hands-on experience developing embedded C firmware for 32-bit ARM Cortex-M or similar microcontrollers. Experience with register-level peripheral programming. Hands-on PCB and firmware bring-up experience. Working knowledge of USB-C / USB Power Delivery (USB-PD) . Experience communicating with companion ICs through I2C, SPI, and/or UART. Proficiency with bench-level debugging equipment, including oscilloscopes, logic/protocol analyzers, multimeters, SWD/JTAG debuggers, and UART logging. Ability to work from datasheets, register tables, and schematics. Proficiency with Git. About the Role We are seeking a hands-on Embedded Firmware / Software Engineer – USB-C Power Delivery to bring up new hardware platforms built around USB-C Power Delivery controllers and develop firmware from initial PCB power-on through production-quality implementation. This is a low-level embedded firmware engineering role focused on hardware interaction, not application-level software development. You will develop and debug embedded C firmware on ARM Cortex-M microcontrollers, configure companion ICs over I2C, SPI, and UART, and work directly at the hardware bench alongside electrical and hardware engineers. The ideal candidate can move comfortably between embedded C development, PCB bring-up, USB-PD functionality, peripheral communication, and hardware-level debugging. What We’re Looking For We’re looking for an engineer who is genuinely comfortable working at the hardware bench and has personally brought up and debugged embedded hardware. The ideal candidate can explain how they powered on a new board, validated power and clocks, initialized the microcontroller, configured peripherals, debugged hardware and firmware issues, and verified USB-C Power Delivery behavior. Strong candidates will combine expertise in: Embedded C + ARM Cortex-M + PCB Bring-Up + USB-C/USB-PD + I2C/SPI/UART + Bench Debugging Candidates whose experience is limited to application-level software development, without hands-on firmware and hardware bring-up experience, may not be a fit. Key Responsibilities PCB Bring-Up & Hardware Validation Bring up new printed circuit boards (PCBs) from initial power-on through functional firmware. Validate power rails, clocks, and hardware interfaces during board bring-up. Connect and configure SWD/JTAG debuggers. Enable and validate microcontroller peripherals. Work closely with hardware engineers to isolate hardware versus firmware issues. Support development from initial prototype bring-up through production-quality firmware. Embedded Firmware Development Develop and debug embedded C firmware on ARM Cortex-M-class microcontrollers. Implement register-level peripheral programming. Configure and communicate with companion ICs over I2C, SPI, UART, and other peripheral interfaces. Work within memory-constrained environments, accounting for flash and RAM limitations. Analyze datasheets, register tables, and schematics to configure and troubleshoot hardware. Document firmware configurations, implementation decisions, and design considerations. USB-C & Power Delivery Implementation Implement and debug USB-C and USB-PD functionality, including: Source and sink roles Dual-role power (DRP) Power-contract negotiation Fault handling and recovery Validate USB-PD behavior and troubleshoot power-delivery issues. Support the implementation and verification of reliable USB-C Power Delivery functionality. Work with hardware engineers to resolve issues involving USB-PD controllers and associated circuitry. Hardware Debugging & Testing Debug firmware and hardware directly at the bench using: Oscilloscopes Logic and protocol analyzers Digital multimeters SWD/JTAG debuggers UART logging Investigate hardware and firmware issues using schematics, register maps, and measurement results. Validate peripheral communication and hardware functionality. Support troubleshooting throughout development and testing. Documentation & Engineering Collaboration Maintain clear documentation of firmware configurations and design decisions. Collaborate closely with hardware and electrical engineering teams. Communicate debugging findings and support root-cause investigations. Use Git for source control and firmware development workflows. Contribute to firmware quality and production readiness. Required Qualifications Strong proficiency in embedded C . Experience developing firmware on 32-bit ARM Cortex-M or similar microcontrollers . Strong understanding of: Interrupts Register-level peripheral programming Memory-constrained embedded development Flash and RAM limitations Working knowledge of USB-C and USB Power Delivery. Understanding of USB-PD source, sink, and dual-role power (DRP) configurations. Understanding of USB-PD power-contract negotiation and fault handling. Hands-on experience with hardware and PCB bring-up. Experience communicating with and configuring companion ICs through I2C, SPI, UART, or similar interfaces. Ability to read and work from datasheets, register maps, and schematics. Experience using oscilloscopes, logic/protocol analyzers, multimeters, SWD/JTAG debuggers, and UART logging. Proficiency with Git. Strong troubleshooting and hardware/firmware debugging skills. Ability to collaborate closely with hardware and electrical engineering teams. Preferred Qualifications Experience with Infineon or Cypress MCU SDKs/IDEs and associated middleware. Experience with ModusToolbox, STM32Cube, or similar development environments . Experience creating or customizing a Board Support Package (BSP). Experience with firmware bootloaders and update mechanisms, including DFU or equivalent. Experience with power-path or regulator firmware, including: VBUS control Over-voltage protection (OVP) Under-voltage protection (UVP) Over-current protection (OCP) Fault detection and recovery Enable and soft-start sequencing Experience with USB subsystems such as: USB hubs DisplayPort Alt Mode Redrivers Retimers Billboard devices Nice-to-Have Qualifications Experience with Infineon EZ-PD / PMG1 or Cypress CCGx USB-PD controllers . Experience with ModusToolbox. Experience implementing continuous integration (CI) for embedded firmware builds. Familiarity with USB-IF Power Delivery compliance requirements and USB-C specifications. Experience taking embedded products from prototype hardware through production.

Location: Quonset, United States 📍 Location: Quonset, RI 📄 Employment Type: Contract 🏢 Work Arrangement: On-site 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Important Screening Requirements Technical background in electronics within robotics, defense, aerospace, avionics, or related industries. Experience preparing, setting up, and executing detailed test procedures. Ability to read electrical schematics, wiring diagrams, engineering drawings, and technical documentation. Hands-on experience with digital multimeters (DMMs), oscilloscopes, benchtop power supplies, and function generators. Must be eligible to obtain and maintain an active U.S. Secret security clearance . Willingness to support offshore field operations, testing, or vessel trials when required. About the Role We are seeking a hands-on Manufacturing Test Technician to support the testing, troubleshooting, and integration of complex electromechanical assemblies used in advanced Autonomous Underwater Vehicle (AUV) systems. This contract opportunity focuses on executing subsystem end-of-line (EOL) tests, inspecting electronic assemblies, diagnosing electrical issues, and supporting pressure vessel production and testing processes. The successful candidate will work closely with engineering and operations teams to ensure test quality, accurately document results, troubleshoot hardware issues, and help meet production milestones. What We’re Looking For We’re looking for a detail-oriented test technician with a strong electronics background and practical experience executing test procedures in a manufacturing or technical environment. The ideal candidate can independently operate electrical test equipment, interpret schematics and engineering drawings, diagnose circuit-level issues, and maintain accurate test documentation. Strong candidates will combine hands-on testing and troubleshooting skills with a commitment to safety, quality, and continuous improvement. Experience with subsea robotics, underwater systems, or pressure vessel testing is a plus. Key Responsibilities Testing & System Integration Support pressure vessel assembly and testing as part of AUV integration. Build, test, and integrate complex electrical and mechanical assemblies. Execute subsystem end-of-line (EOL) tests according to established procedures and documentation. Prepare, configure, and execute detailed test procedures to verify assembly performance. Configure devices by flashing and loading specified software and firmware versions. Support testing and integration activities to meet production requirements. Electronics Inspection & Troubleshooting Perform incoming quality inspection testing on printed circuit board assemblies (PCBAs). Troubleshoot, diagnose, and repair electrical and electronic circuits down to the component level. Use digital multimeters, oscilloscopes, benchtop power supplies, and function generators to investigate electrical issues. Interpret electrical schematics, wiring diagrams, engineering drawings, and technical documentation. Identify hardware issues and support corrective actions to maintain product quality. Pressure Vessel Production & Process Improvement Support the refinement, documentation, and continuous improvement of pressure vessel production and test processes. Assist with testing and troubleshooting activities related to pressure vessel systems. Follow established procedures and technical specifications throughout manufacturing and testing. Contribute to improvements in test efficiency, consistency, and reliability. Quality, Documentation & Safety Maintain 5S standards across test benches and work areas. Perform physical part inspections and close out assigned work orders. Accurately document test procedures, results, and identified issues. Follow facility safety protocols and established testing procedures. Maintain test integrity and attention to detail throughout all assigned activities. Equipment & Laboratory Support Support equipment upkeep and calibration tracking. Maintain tooling organization and laboratory inventory. Keep test benches and work areas organized and ready for testing. Help ensure test equipment and tools are maintained appropriately. Offshore Operations & Field Testing Support offshore field operations, testing, or vessel trials when required. Assist with troubleshooting and testing during field activities. Follow applicable safety procedures during operational support. Required Qualifications Solid electronics background in a relevant technical industry. Demonstrated experience preparing and executing detailed test procedures. Working knowledge of electrical engineering concepts and circuit theory. Ability to read and work from technical documentation, electrical schematics, wiring diagrams, and engineering drawings. Hands-on proficiency with standard electrical test equipment, including: Digital multimeters (DMMs) Oscilloscopes Benchtop power supplies Function generators Strong attention to detail, documentation, organization, and test integrity. Ability to work independently, adapt to changing priorities, and meet deadlines. Strong written and verbal communication skills. Eligibility to obtain and maintain an active U.S. Secret security clearance. Willingness to support offshore field operations, testing, or vessel trials when required. Preferred Qualifications Experience with subsea robotics, AUVs, UUVs, or underwater equipment . Experience safely handling electrical systems up to 400 VDC . Subsea cable splicing, potting, or custom wire harness fabrication experience. Experience with hydrostatic test setups, pressure vessels, or high-pressure pneumatic and hydraulic systems. Current or previous IPC-A-610 and/or IPC/WHMA-A-620 certifications . Experience in low-volume, high-mix manufacturing or prototype-to-production environments.

Location: United States We are seeking an experienced Contract Pressure Vessel Test Technician to operate and maintain the on-site hydrostatic test chamber, executing pressure testing on sealed vessels, housings, and pressurized components utilized in autonomous underwater vehicles (AUVs). These undersea platforms are flooded vehicle architectures, requiring electronics and water-sensitive subsystems to be housed inside individually sealed, pressurized enclosures. This contract engagement is responsible for validating the structural integrity and watertight sealing of these enclosures before integration into production hardware. The contractor will set up and execute technical test procedures, record and monitor pressure data, generate documentation packages, and interface directly with production and engineering stakeholders to confirm parts meet strict engineering specifications. SCOPE OF WORK (CONTRACT DELIVERABLES) · Hydrostatic Test Execution: Set up, operate, and monitor the hydrostatic test chamber to perform pressure testing on sealed vessels, housings, and related components. Follow established procedures to pressurize components to specified proof levels, maintain dwell times, and continuously monitor for pressure decay or leakage. · Test Setup and Fixturing: Prepare test articles by installing necessary fittings, plugs, seals, sensors, and fluid interfaces. Verify fixture and test setups prior to pressurization. Maintain and stage testing fixtures, high-pressure tooling, and supporting hardware. · Inspection and Anomaly Identification: Visually inspect components before, during, and after test sequences for leaks, seal degradation, weld flaws, structural anomalies, or other non-conformances. Accurately document and isolate all non-conforming conditions. · Data Recording and Quality Documentation: Maintain rigorous records of all test parameters, cycles, results, and observed conditions. Complete test logs, formal reports, and quality system documentation in accordance with standard operating procedures. Interpret precision pressure gauges and sensor data to ensure testing integrity. · Equipment Maintenance and Calibration Tracking: Perform routine preventative maintenance on the chamber, pumps, valves, high-pressure lines, and instrumentation. Flag equipment requiring repair, overhaul, or recalibration. · Safety and Environmental Compliance: Maintain strict compliance with safety guidelines governing high-pressure pneumatic and hydrostatic operations. Maintain clean and organized test bays, and promptly report any process anomalies or equipment hazards. · Cross-Functional Collaboration: Interface with production teams, quality assurance, and engineering personnel to align test schedules, communicate test outcomes, and assist in root-cause isolation for failed units. Provide technical feedback regarding recurring build anomalies or design considerations. · Process Improvement Support: Contribute technical input to improve test documentation, fixturing design, cycle times, and chamber throughput. REQUIRED QUALIFICATIONS · 4+ years of hands-on experience in testing, inspection, or manufacturing assembly environments. · Demonstrated experience with high-pressure testing (hydrostatic or pneumatic), leak detection methods, or comparable quality-verification testing. · Proficiency in reading and working directly from technical documentation, engineering drawings, and detailed test plans. · Strong procedural discipline and attention to detail when executing tests and recording empirical data. · Demonstrated mechanical aptitude working with high-pressure systems, pumps, high-pressure fittings, fluid manifolds, and instrumentation gauges. · Effective technical communication skills, both written and verbal, for documenting test reports and conveying results to engineering teams. · Eligible to obtain and maintain an active U.S. Secret security clearance. PREFERRED QUALIFICATIONS · Background in maritime, aerospace, or defense manufacturing environments. · Hands-on experience with hydrostatic proof, leak, or burst testing of sealed electronic enclosures or pressure hulls. · Familiarity with subsea robotics, AUVs, UUVs, or marine equipment. · Active or prior VT (Visual Testing) or PT (Penetrant Testing) inspection credentials. · Experience utilizing ERP or MES platforms for work order tracking and test data logging. · Current or previous certifications in overhead crane operation, rigging, or confined spaces. · Technical certificate, trade diploma, or Associate degree in a relevant technical or mechanical discipline. Contract Rate: $28.00 – $37.00/hour (commensurate with demonstrated skills and experience)

Location: United States ABOUT THE ASSIGNMENT We are seeking an experienced Contract Manufacturing Test Technician to support operations in Quonset, RI. In this engagement, you will work hands-on with cutting-edge technology aimed at advancing the state-of-the-possible in subsea robotics. You will support customer delivery milestones by interfacing with the engineering and operations teams in a multidisciplinary environment to assist in scaling AUV production. This contract scope focuses on executing tests on complex electromechanical assemblies and integrating verified hardware into final platforms. SCOPE OF WORK (DELIVERABLES) · Collaborate with multidisciplinary engineering and operations personnel on pressure vessel assembly and testing as part of overall AUV integration milestones. · Perform device configuration tasks, including flashing and loading specified SW/FW versions onto target hardware. · Build, test, and integrate complex electrical and mechanical assemblies into AUV systems. · Execute detailed subsystem End-of-Line (EOL) tests according to prepared test procedures and documentation. · Conduct incoming quality inspection testing on printed circuit board assemblies (PCBAs). · Troubleshoot, diagnose, and repair electrical, electronic, and integrated circuits down to the component level. · Support the refinement, documentation, and continuous improvement of pressure vessel production and test processes. · Maintain 5S standards across test benches/work areas, conduct physical part inspections, close out assigned work orders, and adhere strictly to facility safety protocols. · Assist with equipment upkeep, calibration tracking, tooling organization, and lab inventory maintenance. · Provide potential travel support for offshore field operations, testing, or vessel trials as project requirements dictate. REQUIRED QUALIFICATIONS · Solid technical background in electronics within relevant industries (Robotics, Defense, Aerospace, Avionics). · Proven track record of preparing, setting up, and executing rigorous test procedures with high attention to detail. · Working knowledge of core electrical engineering concepts and circuit theory. · Proficiency in reading and working directly from technical documentation, electrical schematics, wiring diagrams, and engineering drawings. · Demonstrated commitment to hardware reliability, test integrity, and personal accountability for deliverables. · Hands-on proficiency with standard electrical test equipment (DMMs, oscilloscopes, benchtop power supplies, function generators, etc.). · Strong organizational, documentation, and detail-oriented technical execution skills. · Clear and effective written and verbal communication skills. · Ability to work independently with initiative, adaptability, and high drive toward project deadlines. · Eligible to obtain and maintain an active U.S. Secret security clearance. PREFERRED QUALIFICATIONS · Prior experience in subsea robotics (AUVs, UUVs, or marine/underwater equipment). · Demonstrated experience safely handling electrical systems operating up to 400VDC. · Hands-on subsea cable splicing, potting, or custom harness fabrication experience. · Experience with hydrostatic test setups, pressure vessels, and/or high-pressure pneumatic/hydraulic systems. · Current or past IPC-A-610 and/or IPC/WHMA-A-620 certifications. · Familiarity with low-volume, high-mix (LVHM) or prototype-to-production manufacturing environments. CONTRACT HOURLY RATES · $25.00 – $37.00/hour (commensurate with demonstrated skills and experience)

Location: Valencia Workplace: OnSite Role highlights: - Title: Systems and Software Validation Engineer - Department: Global Manufacturing Organisation - Reports to: Head of MAITE Spain - Location: Valencia, Spain - Type of Contract: Permanent - Working model: On-site - Employment is subject to applicable security screening (incl. SUPO, where required) Why this role matters: As a Systems and Software Validation Engineer, you play a vital role in bringing every satellite that reaches our Valencia production line to operational readiness. You will own the first power-on, initial software and firmware loading, and end-to-end systems verification of fully integrated SAR satellites, running automated functional, power, and bus test campaigns, diagnosing issues at the boundary between software, firmware, and electronics hardware, and ensuring configuration control on final activities. Your work lets test campaigns run independently on the line, without pulling engineers away from other teams. Who We Are ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. Your day-to-day responsibilities - Execute initial satellite power-on, firmware flashing, and subsystem communication verifications. - Run, debug, and execute automated functional, power, and bus test scripts using Python, Shell, and Linux environments. - Work with Git repositories to manage test code, track updates, and verify software builds. - Operate mechanical and electrical ground support equipment (GSE), and troubleshoot electronic hardware, power distribution, and digital interface issues using lab instruments (oscilloscopes, power supplies, multimeters). - Diagnose whether an anomaly is a test setup issue or a genuine unit fault, and raise non-conformance reports (NCRs) in Jira. - Maintain detailed test logs and accurate documentation, and ensure configuration control on final activities. - Assist in managing activities related to satellite launch campaigns. - Actively contribute to continuous improvement initiatives - procedures, processes, tools, test automation, and 6S. - Assist in training and mentoring junior technicians, and communicate proactively with team members and supervisors regarding any challenges or obstacles. - Work closely with the RF Senior Technician, AIT Engineering, and Quality, ensuring clear communication so that satellite build-phase deadlines and technical specifications are met. What we’re looking for Must haves: - Relevant university degree in Aeronautical Engineering, Space Studies, Applied Physics, Electronics, or similar, or equivalent hands-on experience in a related role. - 4+ years of hands-on experience setting up, debugging, and running real test benches and satellite systems or interfaces, not just executing someone else’s scripts. - Proficient in a Linux environment, comfortable modifying and debugging Python scripts, and working with Git. - Systems thinking across avionics, power, and software, enough to tell a test setup fault from a genuine unit fault. - Experience using lab equipment such as power supplies, multimeters, and oscilloscopes. - Excellent communication skills, with particular attention to detail in procedures, preparation, and execution. - Ability to read and interpret technical drawings, assembly instructions, and schematics. - Proficient in English, both written and spoken, to ensure clear communication in a cross-functional environment. Nice to haves: - ICEYE-specific test frameworks, satellite bus specifics, Jira and MES flow, and launch campaign procedures. - Space or satellite AIT (Assembly, Integration, and Testing) background. - Experience with environmental testing (e.g. vibration/shaker rigs, thermal testing). - Experience using Atlassian Cloud (Jira, Confluence). - Lean & Six Sigma experience. Application Process - Talent Acquisition Interview - Hiring Manager General Interview - Technical Interview, including a Technical Challenge - Final Interview Working at ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. How We Work (Our Values) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. Benefits Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. Our Commitment to Diversity, Equity, and Inclusion We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Quonset Point, United States SCOPE OF WORK (DELIVERABLES) Collaborate with multidisciplinary engineering and operations personnel on pressure vessel assembly and testing as part of overall AUV integration milestones. Perform device configuration tasks, including flashing and loading specified SW/FW versions onto target hardware. Build, test, and integrate complex electrical and mechanical assemblies into AUV systems. Execute detailed subsystem End-of-Line (EOL) tests according to prepared test procedures and documentation. Conduct incoming quality inspection testing on printed circuit board assemblies (PCBAs). Troubleshoot, diagnose, and repair electrical, electronic, and integrated circuits down to the component level. Support the refinement, documentation, and continuous improvement of pressure vessel production and test processes. Maintain 5S standards across test benches/work areas, conduct physical part inspections, close out assigned work orders, and adhere strictly to facility safety protocols. Assist with equipment upkeep, calibration tracking, tooling organization, and lab inventory maintenance. Provide potential travel support for offshore field operations, testing, or vessel trials as project requirements dictate. REQUIRED QUALIFICATIONS Solid technical background in electronics within relevant industries (Robotics, Defense, Aerospace, Avionics). Proven track record of preparing, setting up, and executing rigorous test procedures with high attention to detail. Working knowledge of core electrical engineering concepts and circuit theory. Proficiency in reading and working directly from technical documentation, electrical schematics, wiring diagrams, and engineering drawings. Demonstrated commitment to hardware reliability, test integrity, and personal accountability for deliverables. Hands-on proficiency with standard electrical test equipment (DMMs, oscilloscopes, benchtop power supplies, function generators, etc.). Strong organizational, documentation, and detail-oriented technical execution skills. Clear and effective written and verbal communication skills. Ability to work independently with initiative, adaptability, and high drive toward project deadlines. Eligible to obtain and maintain an active U.S. Secret security clearance. PREFERRED QUALIFICATIONS Prior experience in subsea robotics (AUVs, UUVs, or marine/underwater equipment). Demonstrated experience safely handling electrical systems operating up to 400VDC. Hands-on subsea cable splicing, potting, or custom harness fabrication experience. Experience with hydrostatic test setups, pressure vessels, and/or high-pressure pneumatic/hydraulic systems. Current or past IPC-A-610 and/or IPC/WHMA-A-620 certifications. Familiarity with low-volume, high-mix (LVHM) or prototype-to-production manufacturing environments.

Location: Netherlands; Mexico; Israel; United Kingdom; Portugal At SPD Technology, we bring together a team of like-minded people who are driven by the desire to bring value through their work, united in their commitment to high performance and delivering custom, cutting-edge tech solutions that drive clients’ growth. We empower our people with a culture of excellence and enable them with the opportunity to uphold their accountability to contribute on each level. We value humanity and collaboration, encourage professional and personal growth, and foster a supportive and flexible work environment where everyone’s contribution is welcomed. And now we are looking for a Senior Silicon Physical Design Engineer to join us as part of our team. About the role Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration. As a SoC Physical Design Engineer, you will collaborate with functional design, Design for Testing (DFT), architecture, and packaging engineers. In this role, you will solve technical problems with innovative micro-architecture and practical logic circuits solutions, while evaluating design options with optimized performance, power, and area in mind. The AI and Infrastructure team is redefining what’s possible. We empower customers with breakthrough capabilities and insights by delivering AI and Infrastructure at unparalleled scale, efficiency, reliability and velocity. We're the driving force behind groundbreaking innovations, empowering the development of our cutting-edge AI models, delivering unparalleled computing power to global services, and providing the essential platforms that enable developers to build the future. Work Environment Fully remote role. Flexible schedule with participation in team ceremonies and cross-functional collaboration. As a qualified expert, You will Use problem-solving and simulation techniques to ensure performance, power, and area (PPA) are within defined requirements. Collaborate with cross-functional teams to debug failures or performance shortfalls and meet program goals in lab or simulation. Design chips, chip-subsystems, or partitions within subsystems from synthesis through place and route, and sign off convergence, ensuring that the design meets the architecture goals of power, performance, and area. Develop, validate, and improve Electronic Design Automation (EDA) methodology for a specialized sign off or implementation domain to enable cross-functional teams to build and deliver blocks that are correct by construction and ease convergence efforts. We’re looking for you if you have Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience. 5 years of experience with System on a Chip (SoC) cycles. Experience with advanced design, including clock/voltage domain crossing, DFT, and low power designs. Experience in high-performance, high-frequency, and low-power designs. Bonus Points Master's degree or PhD in Electrical Engineering, Computer Engineering or Computer Science, with an emphasis on computer architecture. Experience with scripting languages such as Perl, Python, or Tcl. What’s in it for You Reveal great tech solutions Join the team of experts who create custom, cutting-edge tech solutions for world-renowned businesses, fueling clients growth. Unleash your potential, tackle new challenges, and be part of a team that values your skills and contributions. Focus on long-term impact and building tailored, long-lasting partnerships with our clients. Experience an agile and flexible working environment Work fully remote around the globe, or in a hybrid work model from our office hubs which are equipped with everything needed for comfortable work. Enjoy a flexible working schedule and create work and rest balance for yourself. Empower yourself with a stable workload and a stable income, focusing on lasting cooperation and high-performance culture. Embrace the opportunity for personal and professional growth Take advantage of performance review and career path. Elevate your skills with mentorship program, personal development plan, and individual learnings through the corporate library, public speaking support, and more. Feel cared about Be among like-minded people and feel supported with collaboration, open communication and mutual respect. Join company-wide tech and cultural events, and contribute to meaningful CSR initiatives that resonate with your values.

Location: Canada, Vancouver, BC Workplace: OnSite Here at Humanoid, we believe in a future where robots amplify human potential. That’s why we’ve set out on a mission to build the world’s most capable, commercially-scalable, and safe humanoid robots. We’re bringing that mission to life with HMND‑01 - our rapidly developed humanoid platform being deployed in real industrial environments - and we’re growing the team to take it even further. ABOUT THE ROLE As a Senior Test and Validation Engineer at Humanoid, you will be responsible for bringing new hardware subsystems into a functional, controllable, measurable, and integration-ready state, including calibration, tuning, characterization, and modeling across actuators, hand/gripper mechanisms, and integrated robotic assemblies. You will work closely with mechanical design, firmware, controls, manufacturing, and system integration teams to diagnose unstable behavior, define the right parameters and models, and accelerate hardware maturity for upstream controller and software development. WHAT YOU’LL DO - Design, plan, and execute test procedures for actuators, mechanisms, grippers, and robotic hands. - Build and maintain test fixtures and test rigs for dynamic and endurance testing. - Tune and calibrate sensors like encoder and control loops in the driver, including current, velocity, and position control, and verify stability conditions. - Develop subsystem characterization methods and identify key parameters such as torque constant profile, friction, inertia, backlash, stiffness, thermal behavior, and efficiency. - Design, plan, and execute test procedures for actuators, mechanisms, grippers, and robotic hands. - Build and maintain test fixtures and test rigs for dynamic and endurance testing. - Develop automated test systems (hardware + software) to validate motor performance, force output, back drivability, and safety limits. - Conduct lifecycle, stress, thermal, and environmental tests on components and subsystems. - Analyze test results, create test reports, and drive design feedback loops with engineering teams. - Collaborate with design engineers to define testable requirements, tolerances, and performance metrics. - Support incoming QC, assembly-level verification, and field failure diagnostics. - Maintain test documentation, protocols, and results databases. - Work closely with control and firmware teams to evaluate actuator behavior in closed-loop scenarios. WE’RE LOOKING FOR - Master’s or PhD degree in Mechanical, Mechatronics, Electrical Engineering, Robotics, or a related field. - 5+ years of experience with robotic hardware, controls, actuator characterization, system commissioning. - Hands-on experience with motors, actuators, encoders, force/torque sensors, and hardware instrumentation. - Strong troubleshooting ability and comfort working through ambiguous or unstable hardware problems. - Experience with calibration, parameter identification, modeling, and mathematical optimization. - Proficient with tools such as Python (preferred), MATLAB, or C++ for data capture, analysis, and model fitting using OOP(Object Oriented Programming). - Comfortable with mechanical tools, instrumentation, and prototyping in lab environments. - Strong understanding of safety testing, failure modes (FMEA), and reliability analysis. - Excellent documentation, communication, and cross-functional collaboration skills. - Familiarity with data acquisition systems (DAQ) and tools such as LabVIEW, Python, or MATLAB. BONUS QUALIFICATIONS - Experience with strain-wave gear, planetary gear, or custom robotic actuators. - Experience with robotic hands, grippers, underactuated mechanisms, or tendon-driven systems. - Experience with and complete understanding of commercial BLDC drivers. - Familiarity with low-level control development, parameter identification, or dynamic modeling for electromechanical systems. - Knowledge of EtherCAT, EtherNET, or related motion control DS402. - Experience supporting integrated arm or leg bring-up on larger robotic platforms. WHAT WE OFFER - Comprehensive extended health benefits starting on your first day, including fully paid medical and dental, virtual care, employee and family assistance, and worldwide emergency medical support. - Meaningful time off to rest and recharge: 23 days of annual leave (accrued), 15 days of paid sick leave, and paid company holidays. - Paid end-of-year shutdown: annual company-wide holiday closure spanning Christmas through New Year’s Day. - Competitive equity: stock options with meaningful upside as we scale. - Free daily catered lunch, snacks, and drinks in‑office. - Collaboration with top‑tier engineers, researchers, and product experts in AI and robotics. - Freedom to influence the product and own key initiatives.

Location: Canada, Vancouver, BC Workplace: OnSite Here at Humanoid, we believe in a future where robots amplify human potential. That’s why we’ve set out on a mission to build the world’s most capable, commercially-scalable, and safe humanoid robots. We’re bringing that mission to life with HMND‑01 - our rapidly developed humanoid platform being deployed in real industrial environments - and we’re growing the team to take it even further. ABOUT THE ROLE As a Senior General Mechanical Design Engineer at Humanoid, you will own the design and development of key mechanical subsystems, including robotic joints, structural assemblies, and dynamic mechanisms that enable humanoid mobility and manipulation. This role requires strong fundamentals in mechanical design, system integration, and GD&T (ASME Y14.5), as well as a passion for building complex hardware systems. You will collaborate closely with robotics, controls, electrical, and software teams to rapidly prototype, test, and deploy robotic hardware. Your work will directly influence the performance, reliability, and scalability of our humanoid robots.   WHAT YOU’LL DO - Design and develop mechanical systems for humanoid robots, including structural components, joints, and robotic linkages - Create 3D CAD models and production drawings using SolidWorks / NX, applying GD&T (ASME Y14.5) to ensure precision and manufacturability - Design robotic mechanisms and linkages optimized for strength, weight, efficiency, and durability - Select materials and manufacturing methods that balance performance, weight, cost, and scalability - Lead rapid prototyping and iteration, using tools such as 3D printing, CNC machining, and rapid fabrication - Design components for high volume production, designing for processes like casting, injection moulding, and sheet metal - Work closely with electrical, controls, and software engineers to integrate motors, sensors, and embedded systems into robotic platforms - Conduct mechanical testing and validation to verify performance, durability, and system reliability - Perform design reviews, risk assessments, and safety analysis to ensure robust robotic systems - Generate and maintain technical documentation, including engineering drawings, specifications, and bill of materials (BOM) - Own mechanical subsystems from concept through prototyping, testing, and deployment. WE’RE LOOKING FOR - 5+ years of professional experience in mechanical design for robotics, electromechanical systems, or complex hardware products - Bachelor’s or Master’s degree in Mechanical Engineering, Robotics, Mechatronics, or a related field - Strong fundamentals in mechanics, statics, dynamics, thermals, and material science - Proficiency with SolidWorks, NX or similar CAD tools - Experience applying GD&T based on ASME Y14.5 - Experience designing precision mechanical assemblies or mechanisms - Familiarity with manufacturing processes such as CNC machining, additive manufacturing, and injection molding - Hands-on experience building, assembling, and testing mechanical prototypes - Strong analytical and problem-solving skills - Ability to work effectively in a fast-paced, multidisciplinary engineering environment.   BONUS QUALIFICATIONS - Experience developing robotic or mechatronic systems - Experience working on humanoid, legged, or mobile robots - Experience performing FEA or structural simulations - Experience with design of cooling systems and optimizing thermal performance - Experience designing lightweight structural systems - Familiarity with robotic safety standards such as ISO 10218 - Familiarity with robotic actuators, gear trains, and transmission systems - Experience in robotics, aerospace, automotive, or advanced hardware startups.   WHAT WE OFFER - Comprehensive extended health benefits starting on your first day, including fully paid medical and dental, virtual care, employee and family assistance, and worldwide emergency medical support. - Meaningful time off to rest and recharge: 23 days of annual leave (accrued), 15 days of paid sick leave, and paid company holidays. - Paid end-of-year shutdown: annual company-wide holiday closure spanning Christmas through New Year’s Day. - Competitive equity: stock options with meaningful upside as we scale. - Free daily catered lunch, snacks, and drinks in‑office. - Collaboration with top‑tier engineers, researchers, and product experts in AI and robotics. - Freedom to influence the product and own key initiatives.   For this role in Vancouver, the expected base salary range is $110,000 – $150,000 CAD per year; your placement in that range depends on how your experience maps to our internal leveling.