Вакансии

Development and management of small- to medium-scale capital projects. Mechanical and piping design.

Location: Mexico; Colombia; Argentina; Brazil; Peru About the Role We are looking for a Senior Plumbing & Mechanical Piping BIM Specialist to join a growing U.S.-based VDC team supporting complex commercial, industrial, and mission-critical projects. This is not a design-focused position . We are looking for someone with a strong construction-side mindset who understands how plumbing and mechanical piping systems are fabricated, coordinated, and installed in the field. The ideal candidate has extensive experience developing fabrication-ready BIM models , producing shop drawings , supporting prefabrication , resolving coordination issues, and working closely with construction teams throughout project execution. Responsibilities Develop highly detailed Plumbing and Mechanical Piping BIM models using Revit and Revit Fabrication Parts . Produce fabrication-ready models, shop drawings, spool drawings, and installation documentation. Perform multidisciplinary MEP coordination using Navisworks and BIM workflows. Identify and resolve clashes and constructability issues before construction. Support prefabrication by producing accurate fabrication models, spool assemblies, and quantity takeoffs. Model piping systems, hangers, supports, sleeves, penetrations, and fabrication assemblies. Coordinate directly with project managers, VDC teams, engineers, fabricators, and field personnel. Ensure models accurately reflect installation requirements and construction sequencing. Participate in coordination meetings and proactively resolve field coordination challenges. Requirements 5+ years of experience in Plumbing and/or Mechanical Piping BIM modeling. Strong proficiency with Revit . Advanced experience using Revit Fabrication Parts . Strong working knowledge of Navisworks . Proven experience producing shop drawings , spool drawings , and fabrication-ready BIM models. Strong construction-side experience supporting fabrication, prefabrication, installation, and field coordination. Solid understanding of constructability, installation sequencing, clash detection, and BIM coordination. Experience modeling plumbing and mechanical piping systems for commercial, industrial, healthcare, mission-critical, or data center projects. Direct experience working on U.S. projects , with knowledge of U.S. construction practices and standards. Experience collaborating with U.S.-based engineering and construction teams. Senior-level professional capable of working independently, owning project deliverables, and moving projects forward with minimal supervision. Professional English communication skills. Available to join the team in the short term. Preferred Qualifications Experience with domestic water, sanitary, storm, gas, and specialty plumbing systems. Experience with mechanical piping prefabrication workflows. Familiarity with Autodesk Construction Cloud (ACC) and BIM 360. Experience supporting data center or mission-critical projects. What We Offer Long-term remote opportunity with a growing U.S. VDC company. Work on challenging commercial and mission-critical projects across the United States. Collaborative team environment with experienced VDC professionals. Competitive compensation based on experience. Opportunity to grow into technical leadership as the team continues to expand. Benefits Work for the most exciting companies in the North American Market. Flexible schedules. Work from anywhere. Highly competitive compensation.

Location: Yanbu, Saudi Arabia; Port City Colombo, Sri Lanka; New Delhi, India; Manila, Philippines; Chennai, India; Karachi, Pakistan currently seeking a skilled and experienced Technician, Pipe fitter to join our team. As a trusted partner, Eram Talent is dedicated to connecting talented professionals with top-tier companies across various industries. The successful candidate will work with a reputable client in the engineering or construction industry, where they will be responsible for fitting and assembling pipes and tubes for various systems and structures. Responsibilities Study building plans and blueprints to understand specifications and requirements Measure, cut, thread, and bend pipes using appropriate tools and equipment Fit and assemble pipes and tubes according to specifications Inspect and test pipe systems to identify leaks or other issues Install supports, valves, and control systems for pipe systems Collaborate with engineers, architects, and other technicians to ensure efficient installation and maintenance Adhere to safety protocols and regulations throughout the pipe fitting process Requirements Proven experience as a pipe fitter Demonstrated knowledge of pipe fitting techniques and procedures Ability to read and interpret blueprints and technical drawings Proficient in using pipe fitting tools and equipment Strong attention to detail and accuracy Excellent problem-solving and troubleshooting skills Ability to work independently as well as part of a team Good physical stamina and dexterity Valid certification or license in pipe fitting (if applicable)

Location: Mexico City, Mexico; Colombia; Argentina; Costa Rica; Peru We are seeking a Mechanical Engineer with strong experience in piping and cooling systems to support the design and development of modular data center infrastructure . This role focuses on engineering water-based cooling systems and piping networks that support mission-critical data center environments. The ideal candidate may come from a Mechanical Engineering, Piping Engineering, or Process Engineering background , with solid experience designing fluid systems, cooling loops, and piping layouts for industrial or data center projects. Key Responsibilities Design and develop piping systems for water-based cooling solutions in modular data centers Support the engineering of water tank cooling systems and cooling distribution networks Prepare piping layouts, system diagrams, and technical documentation Collaborate with multidisciplinary teams to integrate mechanical systems into modular data center units Ensure systems meet performance, reliability, and operational requirements for mission-critical facilities Requirements Degree in Mechanical Engineering or related field Strong experience with piping and cooling systems design Experience in data centers or industrial cooling systems Previous experience working with the U.S. market is valued Fluency in English is mandatory Ability to present a portfolio including data center projects Strong communication skills and ability to collaborate with international teams Nice to Have Experience with modular data centers or prefabricated infrastructure systems Experience designing water tank cooling systems or chilled water systems Benefits Work for the most exciting companies in the North American Market. Flexible schedules. Work from anywhere. Highly competitive compensation.

Location: Baku, Azerbaijan The Senior Piping Engineer will lead the piping engineering activities for complex oil & gas projects, providing technical authority across all project phases including FEED, detailed engineering, procurement, construction, and commissioning. The role requires extensive industry experience, strong leadership, and deep knowledge of international piping codes and project execution practices. Key Responsibilities Lead and manage piping engineering deliverables from FEED to commissioning Develop piping design basis, specifications, and piping classes Review piping layout, stress analysis, and support design Ensure compliance with ASME, API, ISO, and client standards Coordinate with multidisciplinary teams and interface with clients/vendors Support construction, fabrication, and commissioning Mentor and guide piping engineers and designers Qualifications & Experience B.E./B.Tech in Mechanical Engineering 15–20 years of piping engineering experience in oil & gas Strong EPC/PMC project execution experience Experience in onshore/offshore, refinery, LNG, or gas processing projects Skills Piping design, materials, and stress analysis CAESAR II / AutoPIPE, PDMS / E3D / SP3D / AutoCAD Strong leadership and communication skills

Location: United States & Canada Workplace: Remote About WorkOS 🚀 WorkOS builds modern developer tools and APIs that make it easy for companies to become Enterprise Ready. Our platform powers authentication, identity, authorization, and other critical infrastructure that developers need to securely scale their products to large organizations. We recently raised a $100M Series C, valuing the company at $2B, led by Meritech and Sapphire with participation from Greenoaks, Craft, Abstract, and Audacious. WorkOS powers enterprise features for many of the fastest-growing AI companies, including OpenAI, Cursor, and Perplexity, Sierra, and Plaid. As AI reshapes software, WorkOS is at the frontier of Human and Agent Authentication, Identity, and Access Control helping companies answer a new critical question: who are your agents, and what are they allowed to do? Our fast-growing customer base includes hundreds of modern software companies building the next generation of enterprise-ready products. ABOUT THE ROLE 💭 The Pipes & Vault team is responsible for building products that connect third-party data, services, and secrets to applications and AI agents. They form a backbone of data infrastructure and agentic workflows for our customers: - Pipes connects external data sources to our customers’ apps and agents - Vault secures credentials and secrets that are used across fleets of agents - Pipes MCP defines authority for agents to take action through integrations Unique to this team is that we also lead internal R&D efforts that leverage our products in novel ways. Examples include an agentic BI tool built on top of Pipes that reimagines how our support teams gets customer insights from internal data lakes, and a new web framework for apps with enterprise-grade security as the default. You'll work across a wide surface area, designing APIs for integrations, building secure storage and key management systems, contributing to open-source specs, and prototyping entirely new developer tools. Engineers on this team care deeply about reliability, security, and developer experience, and move quickly between shipped product work and exploratory R&D. RESPONSIBILITIES ✔️ - Design and build APIs, data connectors, and real-time pipelines that power Pipes and Pipes MCP - Architect systems for encryption, secure storage, key rotation, and secret management in Vault - Contribute to the Pipes MCP specification, defining how agents are granted scoped authority over integrations - Develop a deep understanding of the integrations and data infrastructure landscape and shape product direction across the team's portfolio - Expand product scope through value-add features based on customer input - Work closely with customers to understand integration, security, and compliance requirements - Collaborate with other product teams, solutions engineering, and our go-to-market team - Work directly with leadership on greenfield ideas - Help recruit and assess future engineering team members QUALIFICATIONS 🌟 - 5+ years of industry software development experience - Experience working on small teams in fast-paced environments - Background in building systems that solve for security, encryption, storage, multi-tenant data isolation, or large-scale data platforms - Intellectually curious, independently driven, and passionate about great products - A growth mindset, high emotional intelligence, and strong communication skills - Bonus: Experience with our stack of TypeScript, React, and Postgres - Bonus: Experience in B2B SaaS, developer tools, or a related industry Benefits and Perks (US Only) 💖 At WorkOS, we offer resources that emphasize personal and familial well-being. We offer healthcare coverage for you and your family, including medical, dental, and vision. We offer parental leave, paid-time off and fully remote working arrangements.   - 401k matching - Competitive Equity - Healthcare, dental and vision coverage - FSA, ST/LT Disability, Voluntary Life - Carrot fertility benefits - 20 days paid vacation + 10 holidays + unlimited sick leave - 12 weeks fully paid parental leave - Fitness: Monthly stipend for gyms, yoga classes, race registrations or whatever keeps you active - Wellness: Monthly stipend for a massage, meditations class, therapy, or activities that enhance your well-being - Commuter benefits for hybrid employees in SF/NYC - Unlimited token usage! Please inquire directly with our recruiting team for benefits available to those working outside the US.   Equal Opportunity Employer WorkOS is an equal opportunity employer, committed to diversity and inclusiveness. We will consider all qualified applicants without regard to race, color, nationality, gender, gender identity or expression, sexual orientation, religion, disability or age. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Location: Dammam, Saudi Arabia; Al Jubail, Saudi Arabia; Jeddah, Saudi Arabia; Riyadh, Saudi Arabia Serves as the technical authority for all piping design activities in EPC projects, accountable for technical decisions, quality, schedule, and cost control. Acts as the primary interface with project management and other engineering disciplines to ensure full compliance with SAES, SAMSS, and applicable regulations. Key Responsibilities 1. Technical Leadership Lead and oversee all piping design activities (layout, materials, stress, supports). Review and approve key deliverables: P&IDs, Piping Class Sheets, GADs, Isometrics, Stress Reports. Resolve complex technical and coordination issues across disciplines. Ensure design quality, constructability, and cost optimization. 2. Standards & Compliance Ensure full adherence to (SAES, SAMSS) and international codes (ASME B31.3, API, ASTM). Integrate company procedures with client requirements. 3. Discipline Coordination Interface with Process, Equipment, Structural, Instrumentation, Electrical, and Civil teams. Provide piping loads, review nozzle orientations, and support 3D model reviews (30%, 60%, 90%). 4. Client & Vendor Management Lead technical meetings with clients and secure design approvals. Review and approve vendor documents for critical piping items (valves, fittings, supports). 5. Team & Quality Management Manage and mentor piping designers and stress engineers. Implement QA/QC procedures and mitigate technical risks. Qualifications Education: Bachelor’s degree or higher in Mechanical, Chemical, or Petrochemical Engineering. Certification: P.E. or CEng (or equivalent qualification) preferred. Experience: 15+ years in piping design for oil & gas/petrochemical EPC; minimum 2 full-cycle projects as Lead. Software: Proficient in CAESAR II, SP3D/AVEVA E3D. Knowledge: Expert in SAES, SAMSS, ASME B31.3, API, ASTM standards. Skills: Strong leadership, communication, and decision-making in multicultural environments. Language: Fluent English (spoken & written). Other: Fit for long-term overseas assignments; high integrity and professionalism.

Location: Mumbai, India; Dhahran, Saudi Arabia Eram Talent is looking for a highly skilled and experienced Piping and Layout Lead Engineer to join our dynamic team. As an independent Talent Acquisition Consultancy specializing in the Oil and Energy sector, we are dedicated to connecting top talent with leading organizations. The Piping and Layout Lead Engineer will be responsible for overseeing the design, layout, and implementation of piping systems, ensuring quality, safety, and compliance with industry standards throughout the project lifecycle. If selected, the work location would be onsite at China. Responsibilities 1.Bachelor's degree or higher in Chemical Engineering, Piping Design, or a related field, with over 10 years of piping design experience in the petrochemical industry. Must have served as the Lead Piping Engineer on at least one overseas oil-gas separation unit project. 2.Proficient in oil-gas separation processes and piping design procedures. Skilled in engineering design software such as SmartPlant 3D and AutoCAD, with strong knowledge of relevant standards including SAEP, SAES, ASME B31.3, and API. 3.Capable of independently leading a team through the entire project lifecycle, from conceptual design to issuance of construction drawings. 4.Fluent spoken English is required. Proficiency in Arabic will be considered an advantage. 5.Familiar with Middle Eastern project management practices and cultural norms, with proven ability to collaborate in cross-cultural team settings. Must be willing and adaptable to work in China. 6.Preference will be given to candidates with project experience in the Middle East (especially Saudi Arabia) or strong familiarity with oil-gas separation unit processes. Requirements 1.Bachelor's degree or higher in Chemical Engineering, Piping Design, or a related field, with over 10 years of piping design experience in the petrochemical industry. Must have served as the Lead Piping Engineer on at least one overseas oil-gas separation unit project. 2.Proficient in oil-gas separation processes and piping design procedures. Skilled in engineering design software such as SmartPlant 3D and AutoCAD, with strong knowledge of relevant standards including SAEP, SAES, ASME B31.3, and API. 3.Capable of independently leading a team through the entire project lifecycle, from conceptual design to issuance of construction drawings. 4.Fluent spoken English is required. Proficiency in Arabic will be considered an advantage. 5.Familiar with Middle Eastern project management practices and cultural norms, with proven ability to collaborate in cross-cultural team settings. Must be willing and adaptable to work in China. 6.Preference will be given to candidates with project experience in the Middle East (especially Saudi Arabia) or strong familiarity with oil-gas separation unit processes. Preferred Skills Experience in the Oil and Gas industry. Professional Engineering license or certification. Strong analytical and problem-solving abilities. Contract: 12 Months and Extendable. 1.Possess good professional ethics and integrity, with a passion for the petroleum and petrochemical industry. Demonstrate upstanding character, compliance with laws and regulations, and sound physical and mental health. 2.Strong sense of responsibility, diligent and proactive work attitude, with good overall perspective, coordination skills, and service awareness. 3.Have the professional knowledge, skills, and relevant work experience required for the position. Proficient in using office software such as OFFICE/WPS. 4.Hold a bachelor's degree or higher. 5.Able to use English as a working language, with good English listening, speaking, reading, and writing skills. 6.Willing to work in China, able to accept and adapt to long-term work assignments in the country.

Location: Birmingham, United States Position Summary The Piping Designer is responsible for the layout, modeling, and design of process and utility piping systems for heavy industrial facilities. This position requires strong technical skills, a working knowledge of piping design codes, and the ability to coordinate effectively with multiple engineering disciplines and construction teams. The ideal candidate will have a background in EPC or industrial plant design and be able to translate process requirements into accurate, constructible piping systems and deliverables. Open to anyone in the USA open to rrelocating. Key Responsibilities Develop and prepare 3D piping models, layouts, isometrics, and orthographic drawings for process and utility systems. Work from P&IDs, equipment general arrangements, and vendor drawings to create accurate piping designs. Ensure compliance with project specifications, codes, and standards (ASME B31.1, B31.3, etc.). Develop and maintain equipment layouts, piping plans, and support details in coordination with civil, structural, and mechanical disciplines. Participate in 3D model reviews, design checks, and constructability reviews with engineering and construction teams. Coordinate with process engineers to incorporate design changes and resolve interface issues. Generate material take-offs (MTOs), pipe stress input data, and support drawings as required. Review and reconcile vendor and supplier data with design documents for consistency. Provide field support during construction, including design clarifications and as-built updates. Promote a strong safety culture, incorporating safe design practices into all project work. Qualifications Associate degree, technical diploma, or equivalent combination of education and experience in piping design or mechanical technology. 5–30+ years of experience in piping design for heavy industrial or EPC projects. Proficiency with 3D modeling and design software, such as: AutoCAD Plant 3D CADWorx SmartPlant 3D (SP3D) MicroStation or equivalent Familiarity with piping codes and standards (ASME, API, ANSI). Experience developing isometric drawings, MTOs, and equipment layout plans. Strong understanding of industrial systems, including process piping, steam, condensate, cooling water, compressed air, and other plant utilities. Ability to interpret and coordinate vendor drawings, P&IDs, and mechanical design data. Excellent attention to detail and organizational skills. Effective communication and collaboration across disciplines and project teams. Preferred Qualifications Experience in pulp & paper, power, chemical, or manufacturing facilities. Background in EPC design/build project environments. Knowledge of laser scanning and point cloud integration. Familiarity with BIM coordination tools (Navisworks, Smart Review, etc.). Compensation and Benefits Competitive compensation based on experience and role. Full-time employees receive a comprehensive benefits package including health, dental, vision, 401(k), and paid time off. Contract opportunities available for experienced professionals seeking project-based flexibility. Why Join Us Be part of a team delivering large-scale industrial projects that shape essential infrastructure. Work in an integrated EPC environment with exposure to engineering, procurement, and construction processes. Join a safety-focused, collaborative culture that values innovation, quality, and technical excellence.

Location: Sharjah, United Arab Emirates Pipe Care Group of companies has been helping customers ensure the integrity of their pipeline and facility assets for over 20 years. Pipe Care Group is looking for an experienced Electronics Technician who work with engineering - recommend changes in design and manufacturing procedures and to identify the source of the technical problem and suggest solution. Key Responsibilities & Authorities To follow written and/or verbal instructions assemble products to schematics and/or design specifications using a variety of Testing equipment, hand tools including some precision soldering techniques To test, troubleshoot and repair completed products and field returns as required. To assemble experimental circuitry or complete prototype model according to design, engineering instructions, technical manuals, and knowledge of electronic systems and components To operate drills, or other machine tools to fabricate parts, such as coils or other electronics section’s related parts To enter daily report in to ERP Mold Crab, Flap, Connectors, etc. Maintain work areas in a neat and tidy manner in line with HSE standards, To conduct pressure testing Soldering and Preparation of External and Internal Electronics Winding of Coils, Preparation of Tool Accessories Testing of soft wares and hardware Molding using MS1000 Pressure test of External Electronics and Containers Final Check on Tools Calibration of Tools Testing of incoming PCBs Preparation for R&D and Internal Projects. Skills/Experience: Bachelor’s degree in Electronics Engineering, or a related field Minimum 3-5 years of work experience 3Basic knowledge and experience in electronic instrumentation and measurements Attention to detail, quality focus Good experience of soldering, calibration and testing on electronic PCBs & equipment Stress resistant Good verbal communication skills (in English – desirable) Creative, critical and curious.

Location: Suez, Egypt Pipe Care Group of companies has been helping customers ensure the integrity of their pipeline and facility assets for over 20 years. Pipe Care Group is looking for an experienced Electronics Technician who work with engineering - recommend changes in design and manufacturing procedures and to identify the source of the technical problem and suggest solution. Key Responsibilities & Authorities To follow written and/or verbal instructions assemble products to schematics and/or design specifications using a variety of Testing equipment, hand tools including some precision soldering techniques To test, troubleshoot and repair completed products and field returns as required. To assemble experimental circuitry or complete prototype model according to design, engineering instructions, technical manuals, and knowledge of electronic systems and components To operate drills, or other machine tools to fabricate parts, such as coils or other electronics section’s related parts To enter daily report in to ERP Mold Crab, Flap, Connectors, etc. Maintain work areas in a neat and tidy manner in line with HSE standards, To conduct pressure testing Soldering and Preparation of External and Internal Electronics Winding of Coils, Preparation of Tool Accessories Testing of soft wares and hardware Molding using MS1000 Pressure test of External Electronics and Containers Final Check on Tools Calibration of Tools Testing of incoming PCBs Preparation for R&D and Internal Projects. Skills/Experience: Bachelor’s degree in Electronics Engineering, or a related field Minimum 3-5 years of work experience 3Basic knowledge and experience in electronic instrumentation and measurements Attention to detail, quality focus Good experience of soldering, calibration and testing on electronic PCBs & equipment Stress resistant Good verbal communication skills (in English – desirable) Creative, critical and curious.

Location: Sharjah, United Arab Emirates PipeCare Group is looking for an experienc Mechanical Design Engineer to join our team. By providing technology and service focused solutions to the international arena of the oil and gas industry, the PipeCare Group of companies has been helping our customers ensure the integrity of their pipeline and facility assets for over 20 years. Key Responsibilities: Design inline inspection tools and robotic systems from concept through detailed design and production release. Conduct analyses using FEM/CAE tools (including ANSYS) to validate performance, strength, and reliability. Execute component and material selection based on mechanical performance, environmental conditions, and lifecycle requirements. Develop complete engineering documentation including manufacturing drawings, assembly drawings, specifications, and technical reports. Support prototype fabrication, functional testing, qualification, and iterative design improvements. Define and prepare assembly procedures and maintenance documentation. Support production startup, root-cause failure analysis, and continuous design optimization. Ensure compliance with applicable engineering standards, codes, and regulatory requirements. Qualifications & Technical Skills: Bachelor’s degree in Mechanical or Mechatronics Engineering. Minimum 3 years’ experience in mechanical and/or robotic system design using SOLIDWORKS. Proficient in detailed mechanical design, 2D/3D drawings, BOM preparation, design calculations, computer simulations, validation, and optimization. Strong experience in ANSYS for structural, thermal, and mechanical analyses. Experience in the design and analysis of pigging tools, pipeline inspection crawlers, robotic inspection mechanisms, and in-pipe mobility systems is highly desirable. Strong exposure to design for manufacture (DFM/DFA) and production engineering environments.

Location: Ireland; London, England, United Kingdom About the Job: We're looking for a Revenue Operations Manager, EMEA to be the go-to operator for our EMEA GTM team. This is a high-impact, highly visible role for someone who wants to shape how a growing region runs, from the first marketing touch to the closed deal and beyond. You'll join our GTM Operations team as the face of operations in EMEA, partnering day-to day with Marketing, SDR, Sales, Solution Engineering, and Customer Success leaders across the lifecycle. You'll turn strategy into the processes, cadences, and insights that move the number. And you won't build alone: a global RevOps team stands behind you with builders and enablement teams to give you the foundation to develop what you design, and enablement to help teach your stakeholders how to be successful. As we build in-region Field Operations coverage, you'll set the playbook for how LaunchDarkly runs in EMEA, and you'll see your impact within your first 90 days, not your first year. If you're a business partner at heart who loves turning ambiguity into rhythm and results, this role is for you. Why This Role Matters: High Impact: You'll own the rituals that make EMEA pipeline and forecasting trustworthy, with a direct line to revenue in one of our key regions. Support EMEA in bringing forecast accuracy within +/- 5% accurate. Strategic Influence: Be the voice of EMEA inside GTM Operations and a trusted partner to regional GTM leadership Break New Ground: Help build in-region operations coverage and set the operating playbook for the region Career Growth: Gain exposure across the full GTM lifecycle, from Marketing and Sales to Customer Success, at a high-growth B2B company Regional Playbooks: Adapt global plays for land, expand, and renewals. Track how playbooks drive conversion and optimize over time. Responsibilities: Business Partnership : Serve as the named operations partner for EMEA's Marketing, Sales & Customer Success leaders. Join their operating meetings, know their number, pipeline, and top risks, and bring insight before you're asked. First Line of Defense : Own intake for EMEA field requests. Answer, route to the right operations team, or escalate, so the field never needs to navigate our org chart. Operating Cadence : Run the EMEA forecast, pipeline, and business review cadence. Inspect pipe hygiene with leaders so each forecast is based on clean data, and each meeting ends in strong data-driven decisions, not updates. Strategy -> Process: Apply our global processes, handoffs, and rules of engagement in EMEA. Own the regional variants and keep them documented. Actionable Insights : Use standard data to find what drives the pipeline, understand what becomes a win, help leaders understand their teams. Recommend the change and see it through. Planning Inputs : Bring what the field knows (territory health, ramp, pipe coverage, and in-market demand generation) to Planning and FP&A so EMEA plans reflect realistic expectations. Adoption & Accountability : Partner with Enablement on new motions and launches, then inspect adoption through the cadence and close the gaps. Voice of the Field : Bring EMEA priorities into operational planning and partner with Systems teams to define clear business requirements. About You: You are a business partner first who thrives at the intersection of strategy, data, and operations. You're fluent in the language of pipeline and forecasting, but just as comfortable sitting with a rep as with a VP. You take ownership of outcomes, not just tasks, and you hold yourself to a high bar. You move fast with an 80/20 mindset, and you can look at a process you built and say "this isn't working" without defensiveness. You know how to influence without authority, and you build relationships before you push for change. You stay curious, embrace feedback, and keep looking for ways to level up yourself and those around you. You’re energized by working across multiple EMEA markets, and you keep a global team aligned from a different time zone. Qualifications: Typically requires 8 years of experience, or equivalent depth of expertise, in Revenue Operations, Sales Operations, Marketing Operations, or a related GTM operations role Experience supporting EMEA GTM teams, ideally in a regional-focused capacity Proven experience running forecast, pipeline, and business review cadences with senior GTM leaders Strong working knowledge of the full GTM lifecycle, including lead management, pipeline generation, sales stages, and customer handoffs Hands-on Salesforce experience, with the ability to write clear business requirements for systems product owners and developers Strong analytical skills, with the ability to turn data into clear, actionable recommendations Experience at a B2B SaaS or high-growth tech company Excellent communication and stakeholder management skills, with the ability to influence without authority Experience with GTM tools like Salesforce, Gong, Looker, Outreach, Cognism About LaunchDarkly: Modern software delivery was supposed to be the foundation for a thriving digital business but reality has proven otherwise. Slow, inefficient development cycles, costly outages, and fragmented customer experiences are preventing developers from building their best software. The LaunchDarkly platform helps developers innovate on new features faster while protecting them with a safety valve to instantly rewind when things go wrong. Developers can target product experiences to any customer segment and maximize the business impact of every feature. And by gradually rolling out new application components, they escape nightmare "big-bang" technology migrations. The LaunchDarkly platform was built to guide engineers to the next frontier of DevOps by: Improving the velocity and stability of software releases, without the fear of end customer outages Delivering targeted experiences by easily personalizing features to customer cohorts Maximizing the business impact of every feature through the ability to experiment and optimize Coordinating the release and optimization of software to provide consistent experiences across mobile platforms and device types Improving the effectiveness and productivity of engineering teams, by providing insights into engineering cadence and stability At LaunchDarkly, we believe in the power of teams. We're building a team that is humble, open, collaborative, respectful and kind. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, gender identity, sexual orientation, age, marital status, veteran status, or disability status. Do you need a disability accommodation? Fill out this accommodations request form and someone from our People Operations team will contact you for assistance. Your safety matters to us. To protect yourself from potential scams, LaunchDarkly recruiters will only contact you from @ launchdarkly.com email addresses or via LinkedIn from "Verified Recruiter" accounts. Be cautious of emails from other domains.  Legitimate LaunchDarkly recruiters will never ask for money, fees, or banking information before making a job offer. LaunchDarkly will never make a job offer without conducting a formal interview process. Our interview process does not involve asking detailed questions by email. If you are ever unsure about a communication that you receive, don't click any links—visit Careers | LaunchDarkly directly for confirmed job openings and links to apply. Please notify us of any fraudulent representation by sending an email to careers@launchdarkly.com .

Location: Canada; United States We offer full relocation support, including immigration assistance. You may work remotely at first while your immigration process is being completed. Long-term, the role will transition to onsite work in Montreal. Role overview: We are seeking a Satellite Bus System Engineer to design structural, thermal, power distribution, attitude control, propulsion, CD&H, TT&C/PDT, FSW and interface architecture that supports payloads and mission-operations for current and next-generation remote sensing and communications satellites. The role leads the definition, design, integration, verification and on-orbit support of the platform subsystems, ensuring compliance to mission requirements and company best-practice processes. Tasks summary: Architecture Concept & Requirements • Translate mission‑level requirements (CONOPs, mass, volume, power, envelope, pointing, lifetime, redundancy, reliability…etc.) into system requirements and allocate them to platform subsystems (structures, TCS, EPS, GNC, PROP, C&DH, TT&C/PDT, FSW). • Develop the Platform Architecture Description Document, Interface Control Documents (ICD) and Design Description. • Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Concept Trade & Feasibility • Lead trade studies for structural approach, thermal control concepts (MLI, heat pipes, radiators…etc.), power generation options (e.g. solar array & battery technologies). Detailed Design • Oversee detailed design of all major subsystems (structures, TCS, EPS, PROP, C&DH, C&T, GNC, payload interfaces). • Conduct failure‑mode‑effects‑analysis (FMEA) in support to FDIR, fault‑tree analysis and reliability & availability predictions. • Ensure compliance with mission requirement and payload specifics. • Maintain platform level performance budgets • Support FSW and Satellite Reference Database developments Cross‑Functional Coordination, Stakeholder & Program Interaction • Present technical status, risk analyses, and trade‑study results to senior management. • Negotiate and maintain ICDs with payload and all platform subsystems. • Support to DC & RF harness design, Platform and Payload layout. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Author verification plans, test matrices, and validation procedures for unit, subsystem, and platform level tests. • Coordinate, supervise or support: o  Structural vibration, acoustic & shock testing o TCT & Thermal vacuum testing o  Power distribution functional test o  Closed‑loop test on avionic testbed • Support FSW integration Technical Leadership & Mentorship • Mentor, guide, lead a multidisciplinary team of junior or intermediate system engineers & interns • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to company's knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Maintain platform‑wide standards (structural margin, thermal‑control, power‑bus architecture, redundancy philosophy…etc.). • Ensure all artefacts, analysis, software, documentations and deliverables are version controlled in PLM environment. • Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation Launch‑Site, On‑Orbit & Operations Support • Support launch‑site interface checklists with LVI responsible engineer, pre‑launch checkout procedures, and early‑orbit checkout scripts. • Provide real‑time platform engineering support during launch, on‑orbit commissioning, anomaly investigations and contingency operations. • Support SOOH development and associated operator training. Required Qualifications: · B.Sc. in Electrical Engineering, Aerospace or Physics with 10 + years of system design experience on LEO/MEO/GEO platforms. · Deep knowledge of spacecraft bus subsystems and their interactions. · Experience with power‑electronics design and high‑precision attitude‑control hardware. · Strong understanding of aerospace system engineering fundamentals · Hands-on individual who can support systems integration processes and capability to test systems and resolve problems · Experience with Confluence and JIRA · Demonstrated capability to efficiently work with little supervision · Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity · Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Montreal, Canada Tasks summary: Architecture Concept & Requirements • Translate mission‑level requirements (CONOPs, mass, volume, power, envelope, pointing, lifetime, redundancy, reliability…etc.) into system requirements and allocate them to platform subsystems (structures, TCS, EPS, GNC, PROP, C&DH, TT&C/PDT, FSW). • Develop the Platform Architecture Description Document, Interface Control Documents (ICD) and Design Description. • Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Concept Trade & Feasibility • Lead trade studies for structural approach, thermal control concepts (MLI, heat pipes, radiators…etc.), power generation options (e.g. solar array & battery technologies). Detailed Design • Oversee detailed design of all major subsystems (structures, TCS, EPS, PROP, C&DH, C&T, GNC, payload interfaces). • Conduct failure‑mode‑effects‑analysis (FMEA) in support to FDIR, fault‑tree analysis and reliability & availability predictions. • Ensure compliance with mission requirement and payload specifics. • Maintain platform level performance budgets • Support FSW and Satellite Reference Database developments Cross‑Functional Coordination, Stakeholder & Program Interaction • Present technical status, risk analyses, and trade‑study results to senior management. • Negotiate and maintain ICDs with payload and all platform subsystems. • Support to DC & RF harness design, Platform and Payload layout. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Author verification plans, test matrices, and validation procedures for unit, subsystem, and platform level tests. • Coordinate, supervise or support: o  Structural vibration, acoustic & shock testing o TCT & Thermal vacuum testing o  Power distribution functional test o  Closed‑loop test on avionic testbed • Support FSW integration Technical Leadership & Mentorship • Mentor, guide, lead a multidisciplinary team of junior or intermediate system engineers & interns • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to company's knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Maintain platform‑wide standards (structural margin, thermal‑control, power‑bus architecture, redundancy philosophy…etc.). • Ensure all artefacts, analysis, software, documentations and deliverables are version controlled in PLM environment. • Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation Launch‑Site, On‑Orbit & Operations Support • Support launch‑site interface checklists with LVI responsible engineer, pre‑launch checkout procedures, and early‑orbit checkout scripts. • Provide real‑time platform engineering support during launch, on‑orbit commissioning, anomaly investigations and contingency operations. • Support SOOH development and associated operator training. Required Qualifications: · B.Sc. in Electrical Engineering, Aerospace or Physics with 10 + years of system design experience on LEO/MEO/GEO platforms. · Deep knowledge of spacecraft bus subsystems and their interactions. · Experience with power‑electronics design and high‑precision attitude‑control hardware. · Strong understanding of aerospace system engineering fundamentals · Hands-on individual who can support systems integration processes and capability to test systems and resolve problems · Experience with Confluence and JIRA · Demonstrated capability to efficiently work with little supervision · Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity · Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Warsaw, Poland Blue Projects is looking for experienced Senior Utilities Engineer with FMCG utilities and production process backgrounds. Able to assess a situation and seek multiple perspectives. Your responsibilities: · The incumbent will fulfil the role of Senior Utilities Engineer, which is a position requiring strong and aligned technical skills and competencies, inclusive of the ability to translate engineering fundamentals into practical application. The relevant fields of engineering include but are not limited to: Refrigeration systems Steam raising and heating Water system hydraulics and pre-treatment Compressed air ü Piping design, and system Calculations for heat balances Perform detailed technical plant assessments and audits, and generate appropriate reports Play a lead role in projects delivery, including bidding processes, team coordination, financial reporting and handover. Lead the task of commissioning and testing project solutions. Manage and build sustainable supplier relationships. Be able and willing to travel domestically and internationally, as the various projects may require. Our requirements: QUALIFICATIONS AND EXPERIENCE REQUIRED: BSc / BEng / BTech Mechanical Engineering Professional registration (PrEng or similar) 5+ years’ experience in the utilities engineering environment Knowledge of contracting formats and implementation Strong people skills with the ability to cooperate and collaborate in multi-disciplinary teams Project Management experience will be an advantage KEY COMPETENCIES AND GENERIC SKILLS: 5+ years relevant experience in the mechanical utilities sector, including suitable involvement in major projects Excellent application of appropriate engineering fundamentals · Ability to function autonomously and to self-initiate the development of technical skills and competencies Excellent communication skills, both written and direct one-on-one Engineering management and coordination skills · Ability to lead and/or implement multiple projects simultaneously

✔️ Поиск и привлечение новых клиентов. ✔️ Обзвон потенциальных клиентов и работа с действующей клиентской базой.

Location: Houston, United States We are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves – all designed to help our clients optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions.  This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. The Role and Responsibilities EnerMech have a new opportunity for a Hydraulic Technician, Tube Instrument Fitter to join the Fluid Power Products team in Houston. This role is responsible for the fabrication, installation, inspection, testing, and maintenance of stainless steel hydraulic and instrumentation tubing systems ranging from 1/4" to 2" in diameter. This position requires the ability to interpret engineering drawings and P&IDs, fabricate precise tubing runs, perform coning and threading for medium- and high-pressure tubing, install tubing supports, and ensure all hydraulic systems meet customer specifications and industry safety standards. The Requirements Essential Duties and Responsibilities Install, bend, route, and secure stainless steel tubing from 1/4" through 2" OD. Fabricate tubing assemblies using manual and hydraulic tube benders. Measure, cut, deburr, clean, and prepare tubing for installation. Cone and thread medium-pressure (MP) and high-pressure (HP) stainless steel tubing using manufacturer-approved tooling and procedures. Install MP and HP tubing connections, glands, collars, and pressure fittings in accordance with manufacturer specifications. Install compression fittings, pipe fittings, valves, manifolds, clamps, supports, and hydraulic components. Read and interpret hydraulic schematics, P&IDs, isometric drawings, and fabrication drawings. Ensure proper tube routing, spacing, support, bend radii, and fitting alignment to prevent vibration, fatigue, and leaks. Perform pressure testing, flushing, and leak testing of hydraulic systems. Troubleshoot hydraulic systems and repair tubing, fittings, valves, and component failures. Install and torque hydraulic fittings in accordance with manufacturer specifications. Maintain hydraulic system cleanliness to minimize contamination and ensure system reliability. Perform preventative maintenance and repairs on hydraulic equipment. Operate tubing fabrication equipment including tube benders, coning and threading machines, flaring tools, saws, threaders, and pressure testing equipment. Document completed work, inspection results, and pressure test records. Maintain a safe and organized work environment while complying with company safety policies. Travel to customer facilities and offshore/onshore job sites as required. Required Qualifications High school diploma or GED. Minimum of 3 years of hydraulic tubing installation or related industrial experience. Experience installing 316 stainless steel tubing from 1/4" through 2". Experience coning and threading MP and HP stainless steel tubing. Knowledge of medium- and high-pressure tubing systems and pressure-rated fittings. Proficient in the use of hand tools, power tools, tube benders, and coning/threading equipment. Ability to read and interpret hydraulic schematics and engineering drawings. Knowledge of compression fitting systems such as Parker A-LOK, Swagelok, Hy-Lok, Autoclave Engineers, HIP, or equivalent. Strong mechanical aptitude and troubleshooting skills. Ability to work independently and as part of a team. Valid driver's license and ability to travel as required. Preferred Qualifications Experience in oil & gas, petrochemical, pipeline, offshore, or industrial environments. Experience with hydraulic flushing, cleanliness verification, and hydrostatic pressure testing. Experience assembling and testing hydraulic control panels, manifolds, and power units. Forklift, aerial lift, or overhead crane certification. TWIC Card. OSHA 10 or OSHA 30 certification. Physical Requirements Ability to lift up to 50 pounds. Ability to stand, kneel, bend, climb ladders, and work in confined spaces. Ability to work outdoors in varying weather conditions. Ability to wear required personal protective equipment (PPE). Knowledge, Skills, and Abilities Excellent attention to detail and workmanship. Strong understanding of hydraulic systems, fluid power principles, and pressure-containing tubing systems. Ability to fabricate neat, accurate, leak-free tubing installations. Strong communication and problem-solving skills. Ability to prioritize multiple tasks while meeting project deadlines. Commitment to quality, safety, and customer satisfaction. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities.