Вакансии

Location: Espoo Workplace: OnSite Role highlights: - Location: Espoo, Finland - Department: Production Finland - Reports to: Yogesh Yadav - Employment type: Permanent - Workplace model: Onsite - Employment is subject to applicable security screening (incl. SUPO, where required) Why this role matters: We are looking for a Senior Mechanical & Thermal Production Technician to strengthen our satellite production operations as we scale toward standardized, repeatable, high-volume manufacturing. In this hands-on role, you will independently execute complex assembly, subsystem integration, and thermal verification testing following detailed work instructions and AIT procedures. You will act as a technical anchor for your assigned production area, ensuring workstation readiness and driving frontline troubleshooting alongside Specialists and AIT Engineering. We seek a proactive technical leader who takes full ownership of build activities, models high standards of quality and ESD compliance, and coaches technicians to elevate team capabilities and process stability. Who We Are ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. Your day-to-day responsibilities   - Perform and support mechanical assembly, integration, and testing of precision, high-value hardware. - Take ownership of day-to-day technical readiness in your assigned production area, including tools, fixtures, work instructions, and workstation setup. - Provide practical guidance, troubleshooting support, and on-the-job coaching to technicians, helping them build confidence and independence. - Collaborate with Senior Technician, Production Line Owners, and AIT Engineering to investigate root causes and implement corrective actions for build issues and non-conformances (NCs). - Identify bottlenecks, recurring defects, unnecessary handling, and sources of rework; work with the team to implement improvements and check their effectiveness. - Apply Lean and 6S principles to create safe, organized, ergonomic, and efficient workstations. - Review and refine work instructions, travelers, and checklists to capture redlines and improve procedural clarity and manufacturability. - Support the transition from prototype and low-volume builds to repeatable production by capturing lessons learned and helping establish reliable processes. - Improve throughput while protecting safety, quality, and a sustainable working pace. Raise capacity or workload concerns early and help address their underlying causes. - Build support for process changes by involving the people doing the work, explaining the reasons, and incorporating their feedback. - Work with engineering and quality teams to resolve production issues and introduce process changes through the appropriate review and approval steps. What we’re looking for Must haves: - At least 3 years of hands-on experience in mechanical assembly, integration, or production, with demonstrated ability to work independently on complex hardware. - Experience in a quality-critical or complex manufacturing environment, such as space, aerospace, automotive, robotics, or industrial automation. - Demonstrated ownership of a production activity, workstation, or technical problem, including coordinating support and following actions through to completion. - Working knowledge of Lean manufacturing and 6S, supported by practical examples of improving workstation organization, workflow, or standard work. - Hands-on experience with rework and repair of aerospace mechanical structures, including aluminum components and helicoil (threaded insert) installation and replacement. - Confident use of precision hand tools, torque tools, and measuring equipment, with the ability to interpret mechanical drawings, tolerances, and work instructions. - A solid practical understanding of mechanical assemblies, fastening methods, alignment, and safe hardware handling. - Experience coaching technicians and collaborating with experienced peers, with a clear, respectful, and practical communication style. - Ability to learn production processes quickly, identify improvement opportunities, and turn them into workable solutions with the team. - A mindset focused on repeatability, documentation, and knowledge sharing as production scales. - Willingness and ability to work onsite in Espoo in production and integration environments. - Collaborates with stakeholders to complete the tasks - A mindset to adapt quickly with the fast paced environment of ICEYE. Nice to haves: - Experience with satellite or spacecraft mechanical assembly, integration, or testing. - Experience helping a team transition from prototype or low-volume builds to standardized, higher-volume production. - Experience creating or improving work instructions, visual standards, training materials, or workstation layouts. - Familiarity with structured problem-solving and root-cause analysis, including Six Sigma tools. - Basic knowledge of electronics or mechatronics. - Experience transferring production processes or sharing best practices across multiple sites Application Process - Recruiter Interview - Hiring Manager Interview - Task - Final Interview WORKING AT ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. How We Work (Our Values) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. Benefits Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Torrance, United States 📍 Location: Torrance, CA 📄 Employment Type: Full-Time 🏢 Work Arrangement: 100% On-site, Monday–Friday 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Important Screening Requirements BS or higher in Aerospace Engineering, Mechanical Engineering, Applied Physics, or a related field . 5+ years of aerospace thermal engineering experience . Experience supporting rocket, spacecraft, aircraft, missile, or other high-performance aerospace programs . Strong understanding of heat transfer, fluid dynamics, and high-temperature environments . Experience with electronic unit thermal analysis and control to component-junction temperatures. Ground testing experience involving thermal instrumentation and data acquisition . Strong MATLAB, Python, or similar programming skills. Experience with SolidWorks or Siemens NX . Experience preparing formal technical documentation. Ability to obtain and maintain a U.S. security clearance . Must be able to work on-site in Torrance, CA . About the Role We are seeking a Senior Thermal Engineer to lead thermal engineering methodology across advanced missile systems. This role covers thermal architecture, high-fidelity modeling, first-principles analysis, simulation, hardware testing, ground testing, and flight-test data analysis . You will work across aerodynamics, structures, electrical, propulsion, systems, manufacturing, and test engineering teams. What We’re Looking For We’re looking for a hands-on thermal engineer who can move between analytical modeling, hardware testing, and flight data while working across multiple engineering disciplines to solve challenging thermal problems. Key Responsibilities Perform thermal design and analysis of unmanned air vehicles from conceptual through detailed design. Define thermal system architectures and material-selection strategies. Perform thermal analysis using standard thermal-analysis codes and engineering/hand methods. Conduct transient thermal analysis for time-varying mission profiles. Plan, execute, and analyze specialized thermal ground testing. Plan and support flight testing and post-flight thermal data analysis. Develop MATLAB/Python models using first-principles methods to support engineering decisions. Collaborate with aerodynamics, structures, electrical, and systems engineers. Present thermal status during formal internal and customer reviews. Prepare specifications, test procedures, technical reports, and other formal engineering documentation. Required Qualifications BS or higher in Aerospace Engineering, Mechanical Engineering, Applied Physics, or a related field. In-depth understanding of heat transfer, fluid dynamics, and high-temperature environments . 5+ years of aerospace thermal engineering experience on rocket, spacecraft, aircraft, or missile programs. Experience with electronic unit thermal analysis and component-junction temperature control . Ground testing experience with thermal instrumentation and data acquisition. Strong programming skills in MATLAB, Python, or similar tools. Formal technical documentation experience. SolidWorks or Siemens NX experience. Ability to obtain and maintain a U.S. security clearance. Preferred Qualifications MS or higher degree with a focus on heat transfer and fluid dynamics. Material ablation-response modeling experience. Knowledge of material degradation and surface phenomena in demanding thermal environments. Experience with specialized thermal ground-test facilities. Flight-test experience, including instrumentation design and post-flight analysis. Experience with Thermal Desktop/SINDA . Experience with manufacturing and assembly of thermal systems. Active U.S. security clearance.

Location: Torrance, United States As a Senior Thermal Engineer, you will own the thermal engineering methodology across our missile systems. You will define thermal architectures, develop high-fidelity thermal models, and use first-principles analysis, simulation, and hardware testing to ensure our vehicles perform reliably in some of the most demanding thermal environments imaginable. You'll work across aerodynamics, structures, electrical, propulsion, systems, manufacturing, and test engineering to develop integrated thermal solutions from concept through flight. Your work will span transient mission analysis, electronic unit thermal management, specialized ground testing, and flight-test instrumentation and data analysis. This role is ideal for an engineer who enjoys moving fluidly between analytical models, real hardware, and flight data—and who wants to directly influence vehicle architecture and design decisions from day one. RESPONSIBILITIES Thermal design and analysis of unmanned air vehicles at conceptual, preliminary, and detailed design maturities Define thermal system architectures and material selection strategies for vehicles operating in demanding flight environments Thermal analysis of flight vehicles using standard thermal analysis codes and engineering/hand methods Transient thermal analysis for time-varying mission profiles Ground test planning, execution, and analysis in specialized thermal test facilities Flight test planning, execution, and post-flight thermal data analysis Use first principles and MATLAB/Python models to inform design decisions Collaborate with aerodynamics, structures, electrical, and systems engineers on integrated solutions Present thermal status at formal reviews internally and with customers Prepare formal documentation (specifications, test procedures, technical reports) BASIC QUALIFICATIONS BS or higher degree in Aerospace Engineering, Mechanical Engineering, or Applied Physics In-depth understanding of heat transfer, fluid dynamics, and high-temperature environments 5+ years of experience in aerospace thermal engineering on rocket, spacecraft, aircraft, or missile programs Experience with electronic unit thermal analysis and control to component junctions Ground testing experience with thermal instrumentation and data acquisition Strong programming skills in MATLAB, Python, or similar for tool development Experience preparing formal documentation CAD experience with SolidWorks or Siemens NX Ability to obtain and hold a U.S. security clearance PREFERRED SKILLS AND EXPERIENCE MS or higher degree in Aerospace Engineering, Mechanical Engineering, or Applied Physics with focus on heat transfer and fluid dynamics Experience with material ablation response modeling in extreme thermal environments Knowledge of material degradation and surface phenomena under demanding conditions Experience with specialized thermal ground test facilities Flight test experience including instrumentation design and post-flight analysis Experience with Thermal Desktop/SINDA Experience with manufacturing and assembly of thermal systems Active U.S. security clearance

Location: United States As a Senior Thermal Engineer, you will own the thermal engineering methodology across our missile systems. You will define thermal architectures, develop high-fidelity thermal models, and use first-principles analysis, simulation, and hardware testing to ensure our vehicles perform reliably in some of the most demanding thermal environments imaginable. You'll work across aerodynamics, structures, electrical, propulsion, systems, manufacturing, and test engineering to develop integrated thermal solutions from concept through flight. Your work will span transient mission analysis, electronic unit thermal management, specialized ground testing, and flight-test instrumentation and data analysis. This role is ideal for an engineer who enjoys moving fluidly between analytical models, real hardware, and flight data—and who wants to directly influence vehicle architecture and design decisions from day one. Responsibilities: Thermal design and analysis of unmanned air vehicles at conceptual, preliminary, and detailed design maturities Define thermal system architectures and material selection strategies for vehicles operating in demanding flight environments Thermal analysis of flight vehicles using standard thermal analysis codes and engineering/hand methods Transient thermal analysis for time-varying mission profiles Ground test planning, execution, and analysis in specialized thermal test facilities Flight test planning, execution, and post-flight thermal data analysis Use first principles and MATLAB/Python models to inform design decisions Collaborate with aerodynamics, structures, electrical, and systems engineers on integrated solutions Present thermal status at formal reviews internally and with customers Prepare formal documentation (specifications, test procedures, technical reports) Basic Qualifications: BS or higher degree in Aerospace Engineering, Mechanical Engineering, or Applied Physics In-depth understanding of heat transfer, fluid dynamics, and high-temperature environments 5+ years of experience in aerospace thermal engineering on rocket, spacecraft, aircraft, or missile programs Experience with electronic unit thermal analysis and control to component junctions Ground testing experience with thermal instrumentation and data acquisition Strong programming skills in MATLAB, Python, or similar for tool development Experience preparing formal documentation CAD experience with SolidWorks or Siemens NX Ability to obtain and hold a U.S. security clearance Preferred Skills and Experience: MS or higher degree in Aerospace Engineering, Mechanical Engineering, or Applied Physics with focus on heat transfer and fluid dynamics Experience with material ablation response modeling in extreme thermal environments Knowledge of material degradation and surface phenomena under demanding conditions Experience with specialized thermal ground test facilities Flight test experience including instrumentation design and post-flight analysis Experience with Thermal Desktop/SINDA Experience with manufacturing and assembly of thermal systems Active U.S. security clearance

Location: Valencia Workplace: OnSite Role highlights: Title: Satellite Production Technician, Integration, Mechanical & Thermal Department: Global Manufacturing Organisation Reports to: Head of MAITE Spain Location: Valencia, Spain Type of Contract: Permanent Working model: On-site Employment is subject to applicable security screening (incl. SUPO, where required) Why this role matters: As a Satellite Production Technician, Integration, Mechanical & Thermal, you play a vital role in ensuring ICEYE's satellites are built to fly. You will execute assigned assembly, integration, and testing tasks with high precision and reliability, following established procedures and work instructions. Working under the guidance of Senior Technicians and Production Line Owners, you will ensure process consistency and report technical observations. You are responsible for the quality of your individual work, ensuring all mechanical and thermal assemblies meet ICEYE's standards for flight readiness. Who We Are ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. Your day-to-day responsibilities - Perform assembly and integration activities according to standard operating procedures, including torqueing, bonding, and basic subsystem setups. - Identify and report build or process deviations immediately. Support root cause analysis by providing accurate observations to the technical leadership team. - Work effectively within the production team, supporting colleagues and participating in shift handovers and technical briefings. - Strictly follow work instructions, travelers, and checklists. Ensure all documentation is completed accurately and in real-time. - Support Production Line Owners and Team Leaders by preparing test environments, verifying configurations, and providing technical insight during line meetings. - Maintain a clean, organized, and audit-ready work environment compliant with ESD, safety, and cleanliness standards. What we’re looking for Must haves: - Degree in Mechanical Engineering, Aerospace Engineering, or a related technical discipline -- or equivalent hands-on experience - 1-2 years of practical experience in mechanical assembly, integration, or high-precision technical work - Solid understanding of structural assembly techniques including torqueing, alignment, and thermal hardware application (panels, structures, deployables, pads, pastes, tapes) - Familiarity with aerospace standards (ECSS, IPC, ISO) and cleanroom practices - Strong attention to detail and a proven ability to follow strict technical procedures and documentation requirements - Comfortable working on-site full-time in a fast-paced, dynamic production environment Nice to haves: - Experience with satellite mechanical subsystems and thermal hardware integration - Exposure to environmental test campaigns (vibration, thermal vacuum) - Experience supporting design-for-manufacturing (DfM) initiatives - Familiarity with ERP or MES systems in a production environment - Knowledge of deployable mechanisms Application Process - Talent Acquisition Interview - Hiring Manager General Interview - Technical Interview, including a Technical Challenge - Final Interview Working at ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. How We Work (Our Values) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. Benefits Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. Our Commitment to Diversity, Equity, and Inclusion We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Valencia Workplace: OnSite Role highlights: - Title: Satellite Production Senior Technician, Integration, Mechanical & Thermal - Department: Global Manufacturing Organisation - Reports to: Head of MAITE Spain - Location: Valencia, Spain - Type of Contract: Permanent - Working model: On-site - Employment is subject to applicable security screening (incl. SUPO, where required) Why this role matters: As a Senior Production Technician, Mechanical & Thermal, you serve as a technical anchor within ICEYE's Mechanical & Thermal Production team in Valencia. You will independently execute complex assembly, integration, and testing activities that require precision, deep technical understanding, and sound judgment. Working closely with Specialists and Production Line Owners, you will lead frontline troubleshooting, ensure process stability, and elevate team capability by mentoring junior technicians, all while maintaining the high standards of flight readiness that ICEYE's satellites demand. Who We Are ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. Your day-to-day responsibilities - Perform advanced assembly and integration activities including critical torque and bonding operations, subsystem integration, and complex test setups - Lead the identification and resolution of build and process issues, collaborating with Specialists, AIT Engineering, and Quality to perform root cause analysis and implement corrective actions - Review work instructions, travelers, and checklists for accuracy, providing actionable feedback for revision and initiating improvement projects in safety, reliability, tooling, and efficiency - Act as a coach and role model for junior and standard technicians, providing on-the-job training and transferring best practices across the team - Support Production Line Owners and Team Leaders by preparing test environments, verifying configurations, and contributing technical insight during line meetings - Maintain a clean, organised, and audit-ready work environment compliant with ESD, safety, and cleanliness standards What we’re looking for Must haves: - Degree in Mechanical Engineering, Aerospace Engineering, or a related technical discipline, or equivalent hands-on experience - 3+ years of practical experience in mechanical assembly or integration, ideally in aerospace or another high-reliability environment - Strong understanding of structural assembly techniques including torqueing, alignment, and thermal hardware application (panels, structures, deployables, pads, pastes, tapes) - Familiarity with aerospace standards (ECSS, IPC, ISO) and cleanroom practices - Proven ability to interpret engineering documentation and translate it into practical work instructions - Strong attention to detail, structured problem-solving, and clear communication skills on the production floor Nice to haves: - Experience with satellite mechanical subsystems and thermal hardware integration - Exposure to environmental test campaigns (vibration, thermal vacuum) - Experience supporting design-for-manufacturing (DfM) initiatives - Familiarity with ERP or MES systems in a production environment - Knowledge of deployable mechanisms Application Process - Talent Acquisition Interview - Hiring Manager General Interview - Technical Interview, including a Technical Challenge - Final Interview Working at ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. How We Work (Our Values) - Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. Benefits Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. Our Commitment to Diversity, Equity, and Inclusion We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Valencia Workplace: OnSite Role highlights: Title: Harness & Thermal AIT Engineer Department: Global Manufacturing Organisation Reports to: Head of MAITE Spain Location: Valencia, Spain Type of Contract: Permanent Working model: On-site Employment is subject to applicable security screening (incl. SUPO, where required) Why this role matters: As an AIT Engineer, Harness & Thermal, you play a vital role in ensuring the thermal and electrical integrity of ICEYE's satellite constellation. You will execute hands-on assembly, integration, and testing activities, from harness routing and MLI installation to structural alignment and mission-critical verification. Working across mechanical, electrical, and design teams, you will own technical issues on the production floor and contribute directly to the quality and reliability of spacecraft leaving Valencia ready for orbit. Who We Are ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. Your day-to-day responsibilities - Assemble, route, and secure complex satellite electrical harnesses, ensuring compliance with routing standards and EMI/EMC best practices for grounding and shielding - Install and verify Multi-Layer Insulation (MLI) and thermal protection systems to specification - Conduct alignment, assembly, and verification of mechanical and thermal hardware across satellite production activities - Act as the primary point of contact for technical issues during harness routing and thermal assembly, leading troubleshooting of thermal and electrical connectivity faults - Collaborate with EMI/EMC engineering teams to optimise harness routing and shielding solutions that mitigate electromagnetic interference - Identify process issues and drive continuous improvement of thermal and harness production workflows, contributing to design-for-manufacturing (DFM) and design-for-testability (DFT) initiatives - Represent AIT Engineering across projects and disciplines on mechanical and thermal interface topics, ensuring alignment between production and design teams What we’re looking for Must haves: - 5+ years of hands-on experience in the development, integration, testing, or production of complex spacecraft hardware - Deep technical knowledge of harness manufacturing, routing standards, and thermal control materials including MLI - Familiarity with integration, verification, production ramp-up, and configuration management processes - Fundamental understanding of EMI/EMC principles and best practices for aerospace cabling and harness design - Systems engineering mindset, able to identify and resolve issues across mechanical, thermal, and electrical interfaces - Track record of enabling design-for-manufacturing (DFM) and design-for-testability (DFT) in a production environment - Strong English communication skills (written and spoken) for cross-functional collaboration Nice to haves: - Experience in multidisciplinary engineering environments with a strong cross-functional collaboration track record - Familiarity with aerospace standards (ECSS, IPC) and cleanroom practices - Experience with Atlassian Cloud tools (Jira, Confluence) - Lean and Six Sigma experience Application Process - Talent Acquisition Interview - Hiring Manager General Interview - Technical Interview, including a Technical Challenge - Final Interview Working at ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. How We Work (Our Values) - Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. Benefits Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. Our Commitment to Diversity, Equity, and Inclusion We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: United States Location & Work Arrangement Costa Mesa, CA (On-Site) preferred Remote opportunities may be considered for exceptionally strong candidates located elsewhere in the U.S. Employment Details Contract: 6 months, with potential for extension or conversion to a permanent position Target Bill Rate: Up to $120/hour Requirements Must be a U.S. Citizen Must be eligible to obtain and maintain a Top Secret security clearance WHAT YOU'LL DO Thermal design and analysis of unmanned air vehicles at conceptual, preliminary, and detailed design maturities Define thermal system architectures and material selection strategies for vehicles operating in demanding flight environments Thermal analysis of flight vehicles using CFD, FEA, and engineering methods Material response modeling under combined thermal and mechanical loads Transient thermal analysis for time-varying mission profiles Ground test planning, execution, and analysis in specialized thermal test facilities Flight test planning, execution, and post-flight thermal data analysis Use first principles and MATLAB/Python models to inform design decisions Collaborate with aerodynamics, structures, electrical, and systems engineers on integrated solutions Present thermal status at formal reviews internally and with customers Prepare formal documentation (specifications, test procedures, technical reports) REQUIRED QUALIFICATIONS MS or higher degree in Aerospace Engineering, Mechanical Engineering, or Applied Physics with focus on heat transfer and fluid dynamics In-depth understanding of heat transfer, fluid dynamics, and high-temperature environments 5+ years of experience in aerospace thermal engineering on rocket, aircraft, or missile programs Experience with thermal analysis in high-speed flight regimes Thermal analysis experience using CFD (STAR-CCM+, ANSYS Fluent) and/or FEA thermal solvers Experience with thermal-structural coupling Ground testing experience with thermal instrumentation and data acquisition Strong programming skills in MATLAB, Python, or similar for tool development Experience preparing formal documentation CAD experience with SolidWorks or Siemens NX Passion for defending the United States and her allies Ability to obtain and hold a U.S. Top Secret security clearance PREFERRED QUALIFICATIONS Experience with material response modeling in extreme thermal environments Knowledge of material degradation and surface phenomena under demanding conditions Experience with specialized thermal ground test facilities Experience with chemical kinetics and finite-rate chemistry modeling Flight test experience including instrumentation design and post-flight analysis Experience with thermal-structural analysis codes (NASTRAN, Abaqus, ANSYS Mechanical) Material characterization experience at elevated temperatures Experience with manufacturing and assembly of thermal systems Active U.S. security clearance

Location: United States Location & Work Arrangement Costa Mesa, CA (On-site) preferred Remote opportunities may be considered for exceptionally strong candidates located elsewhere in the U.S. Employment Details Contract: 6 months, with potential for extension or conversion to a permanent position Target Bill Rate: Up to $120/hour Requirements Must be a U.S. Citizen Must be eligible to obtain and maintain a Top Secret security clearance What You'll Do · Own thermal design and analysis for integrated hardware products, including drones, aircraft, missiles, or related defense systems. · Use first-principles engineering judgment to determine the right level of analysis for each design decision, including hand calculations, spreadsheets, MATLAB / Python models, FEA, and CFD. · Define thermal architectures that can withstand rugged environments, demanding flight envelopes, and operational edge cases, including hot, cold, transient, and mission-specific thermal conditions. · Partner with electrical, mechanical, aerospace, software, and systems engineers to document power dissipation, operating modes, thermal constraints, and design tradeoffs. · Build and maintain thermal FEA / CFD models to predict system performance, establish design limits, and define red / yellow operating thresholds for test and field use. · Define and execute prototype builds and thermal tests, including CAD support, sensor selection, DAQ setup, data post-processing, and results documentation. · Present thermal status, risks, tradeoffs, timelines, and recommendations in internal design reviews and customer-facing technical reviews. · Develop internal tools, workflows, or analysis methods that improve speed, consistency, and quality of thermal decision-making. · Support failure reviews and root-cause investigations using test data, thermal analysis, and first-principles reasoning. Required Qualifications · MS or PhD in Mechanical Engineering, Aerospace Engineering, Applied Physics, or a related field with a focus on heat transfer, fluid dynamics, thermal sciences, or thermal systems. · 5+ years of experience designing, analyzing, or validating thermal systems for integrated hardware products. · Strong first-principles understanding of heat transfer and fluid dynamics, including conduction, convection, radiation, fluid flow, and transient thermal behavior. · Experience supporting thermal design for aerospace, aircraft, rocket, missile, UAV, defense, or other high-performance hardware systems. · Experience using thermal analysis, modeling, simulation, and/or physical test data to drive design decisions for passive or active thermal management systems. · Ability to communicate technical tradeoffs clearly across engineering, program, and customer stakeholders, and ability to obtain and maintain a U.S. Top Secret security clearance. Preferred Qualifications · Experience with thermal analysis tools such as STAR-CCM+, ANSYS, Icepak, Flotherm, or comparable FEA / CFD platforms. · Experience using MATLAB, Python, spreadsheets, or similar tools for first-order thermal modeling, transient analysis, or engineering trade studies. · Experience designing thermal hardware such as heat sinks, cold plates, fans, pumps, heat exchangers, thermal interface materials, liquid cooling systems, or air-cooling systems. · Experience planning or executing thermal tests, including sensor selection, data acquisition, data post-processing, and correlation of test results to analysis. · Experience with SolidWorks, Siemens NX, or comparable CAD tools. · Experience supporting formal design reviews, customer reviews, flight test, qualification testing, or fielded hardware. · Experience developing reusable analysis tools, automation workflows, reduced-order models, or other methods that improve analysis speed and consistency. · Strong motivation to support Client’s mission of defending the United States and allied partners.

Location: Costa Mesa, United States 📍 Location: Costa Mesa, California 📄 Employment Type: Contract-to-Perm 🏢 Work Arrangement: Remote Opportunity for Top Candidates 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Important Screening Requirements Remote opportunity is open to qualified candidates within the United States . Relocation assistance is available to qualified candidates from other countries. 5+ years of experience designing, analyzing, or validating thermal systems for integrated hardware products. MS or PhD in Mechanical Engineering, Aerospace Engineering, Applied Physics, or a related field, with a focus on heat transfer, fluid dynamics, thermal sciences, or thermal systems. Strong first-principles understanding of heat transfer and fluid dynamics . Experience supporting thermal design for aerospace, aircraft, rocket, missile, UAV, defense, or other high-performance hardware . Experience with thermal analysis, modeling, simulation, and/or physical test data. Ability to communicate technical tradeoffs across engineering, program, and customer stakeholders. Ability to obtain and maintain a U.S. Top Secret security clearance , where required. About the Role We are seeking a Senior Thermal Engineer to own thermal design and analysis for advanced defense hardware across drones, aircraft, missiles, and related flight systems. This role is ideal for an engineer with deep expertise in heat transfer and fluid dynamics , strong thermal analysis capabilities, and the engineering judgment to select the appropriate level of analysis—from first-order hand calculations through detailed FEA and CFD—to support rapid and effective design decisions. You will work across multidisciplinary engineering teams to develop thermal architectures, evaluate system performance, support prototype testing, and drive thermal design decisions for demanding operating environments. What We’re Looking For We’re looking for a senior thermal engineer who can take ownership of thermal engineering from early design and analysis through testing and validation . The ideal candidate combines strong fundamentals in heat transfer and fluid dynamics with hands-on experience applying thermal analysis to complex, high-performance hardware. You should be comfortable working across disciplines, making engineering tradeoffs, troubleshooting thermal issues, and communicating technical recommendations to both engineering and customer stakeholders. Key Responsibilities Thermal Design & Analysis Own thermal design and analysis for integrated hardware products, including drones, aircraft, missiles, and related defense systems . Apply first-principles engineering judgment to determine the appropriate level of analysis for each design decision, including: Hand calculations Spreadsheets MATLAB/Python models FEA CFD Define thermal architectures capable of operating in rugged environments and demanding flight envelopes. Evaluate hot, cold, transient, and mission-specific thermal conditions . Cross-Functional Engineering Partner with electrical, mechanical, aerospace, software, and systems engineers to document: Power dissipation Operating modes Thermal constraints Design tradeoffs Build and maintain thermal FEA/CFD models to predict system performance, establish design limits, and define red/yellow operating thresholds for testing and field use. Prototype Testing & Validation Define and execute prototype builds and thermal tests. Support CAD activities, sensor selection, DAQ setup , data post-processing, and test-result documentation. Use test data and thermal analysis to validate designs and support engineering decisions. Technical Leadership & Continuous Improvement Present thermal status, risks, tradeoffs, timelines, and recommendations during internal design reviews and customer-facing technical reviews. Develop internal tools, workflows, and analysis methods that improve the speed, consistency, and quality of thermal decision-making. Support failure reviews and root-cause investigations using test data, thermal analysis, and first-principles engineering reasoning. Required Qualifications MS or PhD in Mechanical Engineering, Aerospace Engineering, Applied Physics, or a related field focused on heat transfer, fluid dynamics, thermal sciences, or thermal systems. 5+ years of experience designing, analyzing, or validating thermal systems for integrated hardware products. Strong first-principles understanding of: Conduction Convection Radiation Fluid flow Transient thermal behavior Experience supporting thermal design for aerospace, aircraft, rocket, missile, UAV, defense, or other high-performance hardware systems. Experience using thermal analysis, modeling, simulation, and/or physical test data to drive design decisions for passive or active thermal management systems. Ability to clearly communicate technical tradeoffs across engineering, program, and customer stakeholders. Ability to obtain and maintain a U.S. Top Secret security clearance , where required. Preferred Qualifications Experience with thermal analysis tools such as: STAR-CCM+ ANSYS Icepak FloTHERM Comparable FEA/CFD platforms Experience using MATLAB, Python, spreadsheets , or similar tools for first-order thermal modeling, transient analysis, or engineering trade studies. Experience designing thermal hardware such as: Heat sinks Cold plates Fans Pumps Heat exchangers Thermal interface materials Liquid cooling systems Air-cooling systems Experience planning or executing thermal tests, including sensor selection, data acquisition, data post-processing, and correlation of test results to analysis. Experience with SolidWorks, Siemens NX, or comparable CAD tools . Experience supporting formal design reviews, customer reviews, flight testing, qualification testing, or fielded hardware. Experience developing reusable analysis tools, automation workflows, reduced-order models, or other methods that improve analysis speed and consistency.

Location: Espoo Workplace: Hybrid ROLE HIGHLIGHTS: - Senior Thermal System Engineer - Location: Espoo, Finland - Department: Spacecraft Hardware - Reports to: Thermal Team Lead - Employment type: Permanent - Workplace model: Hybrid / Office - Employment is subject to applicable security screening (incl. SUPO) WHY THIS ROLE MATTERS: Every ICEYE satellite depends on precision engineering and rock-solid reliability. As we grow our operations and expand our spacecraft platforms to meet increasingly demanding mission requirements, we need an experienced spacecraft thermal control engineer to help lead this effort - someone who also brings hands-on experience testing, verifying, and qualifying space hardware. You'll join our Espoo, Finland team as a Senior Thermal System Engineer, supporting the company's continued growth. WHO WE ARE ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. YOUR DAY-TO-DAY RESPONSIBILITIES - Design and implement full spacecraft-level thermal models for current and next-generation spacecraft - Specify and support qualification testing at subsystem and system level - Own thermal hardware end-to-end: propose new thermal design concepts to improve performance, identify new suppliers, and test and validate component designs - Perform thermal analysis of passive and active thermal control components, electrical assemblies, subsystems, and systems - Support assembly, integration, and test (AIT) activities, including maintenance of thermal control components - Support operations teams in resolving thermal issues during Launch and Early Orbit Operations (LEOP) and beyond - Ensure smooth, on-time product delivery from concept through qualification - Contribute to continuous improvement of our existing products - Partner closely with all hardware engineering domains, AIT engineering, and QA to ensure products meet specification - Work with system and subsystem engineers to define requirements for new products - Collaborate with internal and external engineering and AIT teams during integration and build to confirm thermal solutions meet requirements and targets WHAT WE’RE LOOKING FOR Must haves: - Extensive experience in thermal simulation as a Thermal Engineer in the space industry - Experience with TVAC testing and model correlation - Proactive, self-directed working style - Strong troubleshooting and analytical skills - Based in Espoo (most of the team works from Finland); up to 30% remote work is acceptable for this role - Experience working in multi-disciplinary environments (electrical, AIT, mechanical, propulsion, RF) - Experience with thermal control of satellites at system and subsystem level, or comparable complex aerospace systems - Comfortable working cross-functionally with systems, electrical, and manufacturing teams - Strong teamwork, analytical, documentation, and communication skills Nice to haves: - Hands-on experience with spacecraft thermal hardware: surface treatments, MLI, passive and active thermal control components, heat pipes - Experience with Systema-Thermica, ESATAN, and/or Thermal Desktop - MSc in Aerospace Engineering - Knowledge of SAR satellite technology, lifecycles, and the space environment - Experience with Python - Familiarity with industry standards such as ECSS and NASA standards - Solid understanding of spacecraft configurations, orbits, and STK APPLICATION PROCESS - Recruiter screening - Hiring manager interview - Technical task - Technical panel interview - Director interview WORKING AT ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. HOW WE WORK (OUR VALUES) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. BENEFITS Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Sharjah, United Arab Emirates PipeCare Group is looking for an experienc Mechanical Design Engineer to join our team. By providing technology and service focused solutions to the international arena of the oil and gas industry, the PipeCare Group of companies has been helping our customers ensure the integrity of their pipeline and facility assets for over 20 years. Key Responsibilities: Design inline inspection tools and robotic systems from concept through detailed design and production release. Conduct analyses using FEM/CAE tools (including ANSYS) to validate performance, strength, and reliability. Execute component and material selection based on mechanical performance, environmental conditions, and lifecycle requirements. Develop complete engineering documentation including manufacturing drawings, assembly drawings, specifications, and technical reports. Support prototype fabrication, functional testing, qualification, and iterative design improvements. Define and prepare assembly procedures and maintenance documentation. Support production startup, root-cause failure analysis, and continuous design optimization. Ensure compliance with applicable engineering standards, codes, and regulatory requirements. Qualifications & Technical Skills: Bachelor’s degree in Mechanical or Mechatronics Engineering. Minimum 3 years’ experience in mechanical and/or robotic system design using SOLIDWORKS. Proficient in detailed mechanical design, 2D/3D drawings, BOM preparation, design calculations, computer simulations, validation, and optimization. Strong experience in ANSYS for structural, thermal, and mechanical analyses. Experience in the design and analysis of pigging tools, pipeline inspection crawlers, robotic inspection mechanisms, and in-pipe mobility systems is highly desirable. Strong exposure to design for manufacture (DFM/DFA) and production engineering environments.

Location: Espoo; Amsterdam; Lisbon; Valencia; Berlin; Remote; Athens; Warsaw Workplace: Hybrid ROLE HIGHLIGHTS: - Geospatial Image Analyst - Location: EU - Department: Data - Reports to: Senior SAR Image Analyst - Employment type: Permanent - Workplace model: Hybrid - Employment is subject to applicable security screening (incl. SUPO, where required) WHY THIS ROLE MATTERS:   As a Geospatial Image Analyst within ICEYE’s Data line of business, you will play a central role in the exploitation and interpretation of Synthetic Aperture Radar (SAR) imagery - with a primary focus on Defence & Intelligence (D&I) applications and use cases. This position is suited for an individual with several years of hands-on experience in geospatial data analysis and image interpretation, who is ready to deepen their expertise in SAR exploitation and operational delivery. You will contribute directly to mission-critical insights by transforming complex radar data into actionable intelligence products. Working closely with our Image Analysis, Sales Engineering, Marketing, Product and Sales teams, you will combine your analytical acumen with advanced geospatial tools - including AI workflows - to provide stakeholders with timely, accurate, and operationally relevant geospatial intelligence.   WHO WE ARE ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. YOUR DAY-TO-DAY RESPONSIBILITIES   - Conduct advanced SAR image exploitation and analysis to support D&I use cases such as activity monitoring, change detection and pattern-of-life analysis. - Develop and deliver analytic reports, visualizations, and geospatial products that meet customer requirements and operational standards. - Collaborate with product and delivery teams to define analysis specifications, interpret results, and ensure technical outputs align with needs. - Apply geospatial, remote sensing, and SAR science expertise to enhance ICEYE’s analytical capabilities and data value proposition. - Engage with customers and partners, when required, to explain methodologies, interpret outputs, and support the operational use of ICEYE data. - Stay current with advances in SAR technology, geospatial tools, and D&I analytic tradecraft, incorporating new techniques and insights into daily work.   WHAT WE’RE LOOKING FOR Must haves: - 3-5+ years of experience in geospatial analysis, SAR/satellite imagery (electro-optical, thermal, hyperspectral etc) exploitation, or related D&I analytical functions. - Proficient in SAR interpretation, with working knowledge of common geospatial software e.g. QGIS, SOCET GXP, ArcGIS. - Strong understanding of remote sensing and related geospatial principles. - Excellent written and verbal communication skills, with the ability to convey complex analytical findings clearly to technical and non-technical audiences. - Ability to adapt quickly, manage multiple tasks, and thrive in a fast-paced environment.   APPLICATION PROCESS - TA Screen; - Hiring Manager Interview; - Practical Task + presentation; - Final Interview with Senior Management. WORKING AT ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. HOW WE WORK (OUR VALUES) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. BENEFITS Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process.   OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Jakarta, Indonesia; Kuala Lumpur, Malaysia Eram Talent, a division of Eram Group, provides human resources, industrial projects, and maintenance services solutions across a wide range of sectors, including oil and gas, petrochemicals, power, infrastructure, water, mining, healthcare, and IT. With a strong presence across complex industrial environments, the company supports clients with specialized expertise that helps keep critical operations safe, reliable, and efficient. This role focuses on providing process-engineering support to the power generation block, with an emphasis on equipment performance, thermodynamic analysis, operational troubleshooting, and plant optimization. You will contribute to the safe and efficient operation of utility systems by working closely with operations and technical teams to evaluate performance trends, investigate deviations, and support improvement initiatives across key power-generation assets. If selected, the work location would be onsite at Saudi Arabia. Responsibilities Monitor and evaluate Power Generation Block equipment performance daily using process data analysis, efficiency calculations, heat-rate assessments, KPI tracking, and dashboard updates. Perform engineering calculations, thermodynamic assessments, equipment evaluations, and technical studies to identify efficiency losses and improvement opportunities. Assess heat exchangers, steam-turbine-generator condensers, HRSGs, and cooling systems for heat transfer, fouling, and thermal efficiency. Support diagnostic programs for gas and steam turbines, review monthly performance reports, coordinate with OEMs, and develop corrective actions. Investigate process deviations, operational upsets, efficiency losses, and equipment performance issues. Provide daily process-engineering support to Operations, recommend corrective actions, optimize operating parameters, and review SOPs and EOPs. Support mechanical integrity programs and evaluate process impacts on equipment health. Conduct feasibility and improvement studies covering plant efficiency, reliability, steam-cycle performance, water consumption, and emissions. Support plant modifications, MOC activities, design notices, risk assessments, root-cause analyses, and commissioning. Prepare technical reports, performance summaries, recommendations, operating guidelines, and unit trip reports within 24 hours of an upset. Requirements Strong understanding of IGCC power-generation processes, P&IDs, PFDs, and H&MBs, including syngas-fired gas turbines, HRSGs, steam turbines, steam-cycle systems, and power-block interfaces with gasification complexes. Advanced understanding of power-block equipment and steam-cycle systems, with the ability to evaluate equipment performance, heat rate, efficiency, and thermal losses using sound engineering principles and performance-analysis techniques. Ability to perform heat-and-mass balance calculations, energy accounting, process-performance evaluations, troubleshooting, root-cause analysis, and performance-gap investigations. Knowledge of mechanical integrity, asset management, process safety, Management of Change, HAZOP methodology, risk assessment, environmental compliance requirements, and plant operating procedures. Proficiency with process simulation, thermodynamic modeling, and performance-analysis tools such as Aspen Plus, Aspen Plus Dynamics, Aspen HYSYS, GateCycle, or equivalent. Strong capability in process-data analysis using DCS, PI Historian, and performance-monitoring systems to evaluate plant performance and identify operational deviations. At least 7 years of relevant experience in power generation plants, combined-cycle systems, steam systems, boilers, turbines, power distribution, or energy efficiency. Bachelor’s degree in Mechanical Engineering, Process Engineering, or a related field. Experience in petrochemical, refining, gas processing, chemical manufacturing, gasification, fertilizer, power generation, or large industrial utility operations. Professional proficiency in English and effective communication skills for technical reporting and team collaboration. A PE certificate is a plus.

Location: Canada; United States We offer full relocation support, including immigration assistance. You may work remotely at first while your immigration process is being completed. Long-term, the role will transition to onsite work in Montreal. Role overview: We are seeking a Satellite Bus System Engineer to design structural, thermal, power distribution, attitude control, propulsion, CD&H, TT&C/PDT, FSW and interface architecture that supports payloads and mission-operations for current and next-generation remote sensing and communications satellites. The role leads the definition, design, integration, verification and on-orbit support of the platform subsystems, ensuring compliance to mission requirements and company best-practice processes. Tasks summary: Architecture Concept & Requirements • Translate mission‑level requirements (CONOPs, mass, volume, power, envelope, pointing, lifetime, redundancy, reliability…etc.) into system requirements and allocate them to platform subsystems (structures, TCS, EPS, GNC, PROP, C&DH, TT&C/PDT, FSW). • Develop the Platform Architecture Description Document, Interface Control Documents (ICD) and Design Description. • Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Concept Trade & Feasibility • Lead trade studies for structural approach, thermal control concepts (MLI, heat pipes, radiators…etc.), power generation options (e.g. solar array & battery technologies). Detailed Design • Oversee detailed design of all major subsystems (structures, TCS, EPS, PROP, C&DH, C&T, GNC, payload interfaces). • Conduct failure‑mode‑effects‑analysis (FMEA) in support to FDIR, fault‑tree analysis and reliability & availability predictions. • Ensure compliance with mission requirement and payload specifics. • Maintain platform level performance budgets • Support FSW and Satellite Reference Database developments Cross‑Functional Coordination, Stakeholder & Program Interaction • Present technical status, risk analyses, and trade‑study results to senior management. • Negotiate and maintain ICDs with payload and all platform subsystems. • Support to DC & RF harness design, Platform and Payload layout. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Author verification plans, test matrices, and validation procedures for unit, subsystem, and platform level tests. • Coordinate, supervise or support: o  Structural vibration, acoustic & shock testing o TCT & Thermal vacuum testing o  Power distribution functional test o  Closed‑loop test on avionic testbed • Support FSW integration Technical Leadership & Mentorship • Mentor, guide, lead a multidisciplinary team of junior or intermediate system engineers & interns • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to company's knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Maintain platform‑wide standards (structural margin, thermal‑control, power‑bus architecture, redundancy philosophy…etc.). • Ensure all artefacts, analysis, software, documentations and deliverables are version controlled in PLM environment. • Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation Launch‑Site, On‑Orbit & Operations Support • Support launch‑site interface checklists with LVI responsible engineer, pre‑launch checkout procedures, and early‑orbit checkout scripts. • Provide real‑time platform engineering support during launch, on‑orbit commissioning, anomaly investigations and contingency operations. • Support SOOH development and associated operator training. Required Qualifications: · B.Sc. in Electrical Engineering, Aerospace or Physics with 10 + years of system design experience on LEO/MEO/GEO platforms. · Deep knowledge of spacecraft bus subsystems and their interactions. · Experience with power‑electronics design and high‑precision attitude‑control hardware. · Strong understanding of aerospace system engineering fundamentals · Hands-on individual who can support systems integration processes and capability to test systems and resolve problems · Experience with Confluence and JIRA · Demonstrated capability to efficiently work with little supervision · Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity · Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Montreal, Canada Tasks summary: Architecture Concept & Requirements • Translate mission‑level requirements (CONOPs, mass, volume, power, envelope, pointing, lifetime, redundancy, reliability…etc.) into system requirements and allocate them to platform subsystems (structures, TCS, EPS, GNC, PROP, C&DH, TT&C/PDT, FSW). • Develop the Platform Architecture Description Document, Interface Control Documents (ICD) and Design Description. • Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Concept Trade & Feasibility • Lead trade studies for structural approach, thermal control concepts (MLI, heat pipes, radiators…etc.), power generation options (e.g. solar array & battery technologies). Detailed Design • Oversee detailed design of all major subsystems (structures, TCS, EPS, PROP, C&DH, C&T, GNC, payload interfaces). • Conduct failure‑mode‑effects‑analysis (FMEA) in support to FDIR, fault‑tree analysis and reliability & availability predictions. • Ensure compliance with mission requirement and payload specifics. • Maintain platform level performance budgets • Support FSW and Satellite Reference Database developments Cross‑Functional Coordination, Stakeholder & Program Interaction • Present technical status, risk analyses, and trade‑study results to senior management. • Negotiate and maintain ICDs with payload and all platform subsystems. • Support to DC & RF harness design, Platform and Payload layout. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Author verification plans, test matrices, and validation procedures for unit, subsystem, and platform level tests. • Coordinate, supervise or support: o  Structural vibration, acoustic & shock testing o TCT & Thermal vacuum testing o  Power distribution functional test o  Closed‑loop test on avionic testbed • Support FSW integration Technical Leadership & Mentorship • Mentor, guide, lead a multidisciplinary team of junior or intermediate system engineers & interns • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to company's knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Maintain platform‑wide standards (structural margin, thermal‑control, power‑bus architecture, redundancy philosophy…etc.). • Ensure all artefacts, analysis, software, documentations and deliverables are version controlled in PLM environment. • Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation Launch‑Site, On‑Orbit & Operations Support • Support launch‑site interface checklists with LVI responsible engineer, pre‑launch checkout procedures, and early‑orbit checkout scripts. • Provide real‑time platform engineering support during launch, on‑orbit commissioning, anomaly investigations and contingency operations. • Support SOOH development and associated operator training. Required Qualifications: · B.Sc. in Electrical Engineering, Aerospace or Physics with 10 + years of system design experience on LEO/MEO/GEO platforms. · Deep knowledge of spacecraft bus subsystems and their interactions. · Experience with power‑electronics design and high‑precision attitude‑control hardware. · Strong understanding of aerospace system engineering fundamentals · Hands-on individual who can support systems integration processes and capability to test systems and resolve problems · Experience with Confluence and JIRA · Demonstrated capability to efficiently work with little supervision · Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity · Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Colombia; Brazil; Peru The Data Center Capacity & Inventory Engineer owns a single, accurate, and always-current view of the organization's entire data center estate worldwide. The role exists because the biggest infrastructure decisions — where to place workloads, when to expand or consolidate, and how to plan a move — are only as reliable as the underlying data on power, cooling, racks, and space. That information is typically fragmented across sites, spreadsheets, and providers. This role consolidates it into one authoritative source of truth, keeps it current, and turns it into capacity forecasts, utilization reporting, and move/migration analysis the business depends on. It is accountable for the inventory and operational data of every facility the organization uses — owned, colocation, and edge. Scope & Context Global portfolio: every data center facility across all regions — company-owned and on-premises sites, colocation and wholesale space, and edge or remote equipment rooms. Physical assets: racks and cabinets; power (utility feeds, UPS, generators, PDUs, circuits); cooling (CRAC/CRAH, containment, chilled water); floor, cage, and suite space; structured cabling; and environmental monitoring. Data domains: inventory, capacity and utilization, contracts and commitments (colo agreements, power and space reservations), and a history of physical changes. Organizational placement: reports into infrastructure/IT leadership and partners with networking, cloud, security, procurement, and finance. Key stakeholders: site and facilities teams, colocation providers, infrastructure engineering, capacity planning, finance (cost allocation), and the business units requesting space or moves. Key Responsibilities Define and enforce how every site records and reports its power, cooling, rack, and space configuration, so data is comparable across the portfolio. Participate in the the space, power, and cooling analysis behind data center moves, migrations, and consolidations: what fits where, target-site readiness, and the sequencing of each move. Supply the accurate capacity and utilization data that drives resourcing and planning decisions Manage capacity risk proactively: identify sites approaching power, cooling, or space limits before they constrain the business. Uphold resilience, safety, and compliance standards across facilities, including redundancy targets (for example N+1) and disaster-recovery posture. Inventory, Data & Capacity Management (Core Mandate) This is the primary purpose of the role: a single, trusted, global source of truth for every data center, kept accurate and current. Maintain the global inventory and data for all facilities A complete register of every data center and equipment room, with location, provider, and contracted commitments. Space: floor area, cage and suite allocation, rack and cabinet counts, rack-unit (RU) inventory and occupancy, and remaining white space. Power: utility feeds and redundancy, UPS and generator capacity, PDU and circuit inventory, provisioned vs. actual draw (kW) per rack, row, and room, and PUE where measured. Cooling: cooling capacity and type, containment, redundancy (N, N+1), temperature and humidity envelopes, and thermal headroom. Racks & assets: rack elevations, cabinet layouts, and the physical assets each contains, mapped to their power and connectivity. Turn that data into decisions Track utilization and remaining headroom for space, power, and cooling at rack, row, room, and site level. Forecast capacity, flag sites approaching their limits, and recommend expansion, consolidation, or reallocation. Provide the analysis behind every move and migration — what a target site can support and how a move should be staged. Produce regular reporting and dashboards for leadership, finance, and planning. Own the tooling and data quality Define data standards, naming conventions, and an audit cadence that keep the inventory accurate. Run periodic physical audits and reconciliations against the recorded data. Requirements Proven experience managing data center infrastructure at multi-site or global scale, ideally across a mix of owned and colocation facilities. Deep, practical understanding of data center power, cooling, and physical space — circuits, PDUs, UPS and generators, redundancy concepts (N, N+1, 2N), cooling systems, and containment. A demonstrated track record of keeping accurate inventory and capacity data current across many sites. Experience planning and executing data center moves, migrations, consolidations, or build-outs. Colocation and vendor management experience — contracts, SLAs, capacity commitments, and cost control. Strong data and reporting skills: able to turn raw facility data into clear capacity forecasts and dashboards, with advanced spreadsheet skills and comfort using BI or reporting tools. Experience coordinating work across multiple regions, time zones, and stakeholder groups. Preferred Qualifications & Certifications Data center certifications such as Uptime Institute (ATD/ATS), BICSI DCDC, or EPI CDCP/CDCS/CDCE. Familiarity with specific DCIM platforms (for example Nlyte, Sunbird, Device42, or Hyperview). Knowledge of relevant standards — Uptime Institute Tier topology, ANSI/TIA-942, and ASHRAE thermal guidelines. Exposure to hybrid environments (on-premises, colocation, edge, and public cloud) and how physical capacity relates to workload placement. Awareness of data center sustainability and energy-efficiency practice, including PUE and power reporting. Benefits Full Remote Comfortable working on EST time zone Contractor Working equipment provided by the company Equal Opportunity Employer PartnerOne is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic. This recruitment process may use automated or artificial intelligence to screen or assess applicants. This job posting is for an existing vacancy.

Velaura is looking for an RTL Power Engineer to design SoC power management, thermal controls, and low-power architecture.