Вакансии

Location: Dammam, Saudi Arabia PIPECARE Group is looking for an experienced Rigger Level 1 to join our team in Dammam, Saudi Arabia. By providing technology and service focused solutions to the international arena of the oil and gas industry, the PipeCare Group of companies has been helping our customers ensure the integrity of their pipeline and facility assets for over 25 years. Industry/sector: Oil & Gas / In Line Inspection services. Rigger Level 1 is responsible for planning, supervising, and executing all rigging and lifting activities safely and efficiently. The role ensures that lifting operations are carried out in compliance with company procedures, client requirements, and applicable safety standards. Key Responsibilities & Authorities Perform and supervise all rigging and lifting activities in accordance with approved lifting plans and safety procedures. Inspect slings, shackles, hooks, chains, wire ropes, spreader beams, and other lifting equipment before use. Ensure all lifting gear is properly certified, tagged, and fit for purpose. Determine load weights, center of gravity, and suitable lifting points before lifting operations. Coordinate with crane operators, supervisors, and lifting teams to ensure safe execution of lifting activities. Direct crane movements using approved hand signals and communication methods. Ensure loads are properly secured, balanced, and controlled during lifting operations. Conduct pre-lift inspections and participate in toolbox talks and risk assessments. Monitor lifting operations and stop any activity that presents a safety risk. Report damaged or defective lifting equipment and remove it from service. Maintain lifting equipment records and inspection logs. Assist in loading, unloading, positioning, and installation of equipment and materials. Guide and mentor junior riggers. Report incidents, near misses, unsafe conditions, and operational issues to the supervisor. Following team leader instruction all the time during the activities. Need to submit all lifting plans prior to each activity. Always available to meet the Client schedule. Train other employees when and as required by other team members as per Management. Always notify the line manager for sick leave or annual vacation. Need to attend multiple activities in given single day. Requirements High School Diploma or equivalent. Valid Saudi Aramco Rigger Level 1 certification. Minimum 5 years of experience in rigging and critical lifting operations. Knowledge of lifting equipment, rigging techniques, and load calculations. Ability to read and interpret lifting plans and rigging drawings. Good communication skills in English. Strong understanding of HSE requirements and lifting regulations. Saudi Aramco work experience. Work experience in Hydrocarbon facilities. Must have valid Driving License of KSA.

Location: Makkah, Saudi Arabia; Riyadh, Saudi Arabia; Jeddah, Saudi Arabia; Dammam, Saudi Arabia Job Description The Turbine & Precision Equipment Rigger is responsible for executing highly critical, heavy, and precision lifting operations during power plant turbine outages and industrial maintenance shutdowns. This role demands exceptional technical expertise to safely handle multi-million dollar rotating equipment, gas/steam turbine components, and delicate machinery within tightly restricted spaces. The successful candidate must strictly adhere to engineered lifting plans, maintain zero-compromise safety standards, and display flawless precision under fast-paced outage timelines. Key Responsibilities Rigging Execution: Safely attach, lift, guide, and position heavy turbine components and associated mechanical equipment in strict compliance with approved, engineered lifting plans . Pre-Lift Assessment: Thoroughly review critical technical parameters prior to every lift, including total load weight, exact center of gravity , designated lifting points, travel path clearances, and final landing arrangements. Equipment Management: Select, calculate, and inspect specialized rigging hardware such as synthetic/wire-rope slings, shackles, spreader beams , chain blocks, and specialized lifting accessories. Compliance & Safety Verification: Audit all lifting tackle before use to verify valid identification tags, current inspection status, and Working Load Limits (WLL) . Precision Maneuvering: Expertly guide immense structural loads through highly restricted areas and congested plant environments utilizing controlled mechanical methods and precise signaling. Requirements Experience: Minimum of 3 to 5 years of proven experience as an industrial rigger, with a strong preference for candidates who have completed major turbine outages, power plant shutdowns, or heavy mechanical maintenance . Technical Skills: Comprehensive knowledge of rigging mathematics, center-of-gravity calculations, crane signals, and rigging hardware capacities. Certifications: Valid third-party rigging certifications (such as TUV, Bureau Veritas, Aramco, or equivalents ) are highly preferred. Physical Capability: Ability to work in confined spaces, at heights, and handle the physical demands of 12-hour shifts typical during emergency or scheduled outages. Soft Skills: Strong teamwork orientation, high attention to detail, and a strict commitment to safety protocols.

Location: Abu Dhabi, United Arab Emirates We are? A leading specialist engineering services company delivering integrated solutions for complex energy and infrastructure projects and operating assets. Our business is built on the belief that our people are what make EnerMech excellent. When we are thriving globally it’s not just about investing in our infrastructure, service offering and technology, but by also investing in our people. The role? The primary responsibility is to support the deck operations on the client platform as per company processes and procedure and demonstrate safety leadership and continuous development in all aspects of crane, lifting and support service activities. Main Responsibilities & Key Result Areas Be responsible for all lifts onshore or offshore as directed by the Crane Supervisor, Deck Foreman or client personnel where required. Carry out Banking/Signalman duties as and when required. The Rigger is responsible for attaching and detaching the load to and from the crane. The Rigger is also responsible for the selection of the correct lifting arrangement in accordance with planned lifting operations and to check them before use. Check that the lifting equipment being used is in good condition, certified for use, correctly colour coded, and of sufficient capacity to carry out the lift. The directing and movement of the crane/load is initiated by the Rigger/slinger using the designated signaling method. Ensure at all times that the load is under complete control by the use of tag lines, or whatever assistance is deemed necessary. Able to establish weights and the effect of the center of gravity, and to balance loads and judge distances, heights, and clearances. Ensure that no load is to be lifted where the weight is not stated or unknown. Participate in the planning and risk assessment of all routine and up to non-routine complicated crane-lifting operations associated with the day-to-day running of the client platforms. Have sufficient general engineering knowledge of loose lifting equipment to carry out daily inspection routines. Be multi-skilled in other platform duties including operating firefighting equipment and undertaking fire standby and deck duties, when required. Complete reports, lifting operation risk assessments, logs and other documentation, as required. Assist in maintaining all lifting appliances including cranes in clean and tidy condition. Maintain loose lifting equipment in a safe and operable condition. Carry out pre-use inspection of loose lifting equipment. Carry out minor repairs to loose lifting equipment i.e., repair of safety catches. In line with clients or company Bi-annual lifting equipment campaign, assist TPI with inspection & re-certification of loose lifting equipment. Assist Crane Operator Maintainer & Maintainers in carrying out routine maintenance duties, acting as maintenance technician where required. Requirements Riggers shall be able to read and write English fluently; they shall be experienced, fully trained and wholly competent in the rigging duties associated with offshore crane operations & shall: A minimum 21 years of age. Educated to a minimum qualification of higher secondary school certificate or equivalent qualification. Have a minimum of 5 years offshore experience. Shall be trained and be assessed every 2 years through Company qualified assessor approved by COMPANY. Competent by approved ADNOC TPA skills assessor against the criteria for Level 3 rigging competency preferred. Competent by approved ADNOC TPA skills assessor against the criteria for Banksman/Signaler competency preferred. Competent by approved ADNOC TPA skills assessor against the criteria for Overhead Crane Operator competency preferred. The Rigger shall also have adequate understanding of the capabilities and limitations of each crane about offshore operations. Riggers who have not worked on the any offshore platforms shall undertake sufficient time to familiarize themselves with the specific operating procedures under the supervision before commencing lifting operations. Behaviors and Personal Qualities Teamwork. Self-motivated. Good Communication Skills High standards of workmanship Ability to work and react under pressure and tight deadlines EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities.

Location: Abu Dhabi, United Arab Emirates We are? A leading specialist engineering services company delivering integrated solutions for complex energy and infrastructure projects and operating assets. Our business is built on the belief that our people are what make EnerMech excellent. When we are thriving globally it’s not just about investing in our infrastructure, service offering and technology, but by also investing in our people. The role? The primary responsibility is to support the deck operations on the client platform as per EnerMech processes and procedure and demonstrate safety leadership and continuous development in all aspects of crane, lifting and support service activities. Main Responsibilities & Key Result Areas Be responsible for all vessel lifts and those on the platform as directed by the Crane Supervisor, Deck Foreman or client. Carry out Banking/Signalman duties as and when required. The Rigger is responsible for attaching and detaching the load to and from the crane. The Rigger is also responsible for the selection of the correct lifting arrangement in accordance with planned lifting operations and to check them prior to the use. Check that the lifting equipment being used is in good condition, certified for use, correctly colour coded, and of sufficient capacity to carry out the lift. The directing and movement of the crane/load is initiated by the Rigger / slinger using the designated signaling method. Ensure at all times that the load is under complete control by the use of tag lines, or whatever assistance that is deemed necessary. Able to establish weights and the effect of the center of gravity, and to balance loads and judge distances, heights and clearances. Ensure that no load is to be lifted where the weight is not stated or unknown. Participate in the planning and risk assessment of all routine and up to non-routine complicated crane-lifting operations associated with the day-to-day running of the client platforms. Have sufficient general engineering knowledge of loose lifting equipment to carry out daily inspection routines. Be multi-skilled in other platform duties including operating of firefighting equipment and undertaking fire standby and deck duties, when required. Complete reports, lifting operation risk assessments, logs and other documentation, as required. Assist in maintaining all lifting appliances inclusive of cranes in clean and tidy condition. Maintain loose lifting equipment in a safe and operable condition. Carry out pre-use inspection of loose lifting equipment. Carry out minor repairs to loose lifting equipment i.e. repair of safety catches. In line with clients Bi-annual lifting equipment campaign assist TPI with inspection & re-certification of loose lifting equipment. Assist Crane Operator Maintainer & Maintainers in carrying out routine maintenance duties. Requirements Should be able to read and write English fluently, they shall be experienced, fully trained and wholly competent in the rigging duties associated with offshore crane operations & shall: Educated to a minimum qualification of higher secondary school certificate or equivalent qualification. Have a minimum of 5 years offshore experience. Should have adequate understanding of the capabilities and limitations of each crane with regard to offshore operations. Behaviors and Personal Qualities Teamwork. Self-motivated. Good Communication Skills High standards of workmanship Ability to work and react under pressure and tight deadlines EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities.

Location: Aberdeen, United Kingdom We are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we've been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle - offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves - all designed to help our clients optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions. This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. The Role and Responsibilities An exciting new permanent opportunity has arisen within our Cranes and Lifting department for an Advanced Scaffolder/Rigger/Deck Crew. The role will be to work on a 3/3 rotation based in the North Sea. The opportunity is to work on a new contract with promising longevity. Duties will include; Maintain scaffolding and to oversee all aspects of construction & fabric maintenance Carry out weekly scaffold inspections & record keeping updating registers Ensure at all times that all rigging / erection work is completed, in compliance with LOLER regulations and to a high standard of safety Understand Lift Plans Undertake appropriate Risk Assessments (RA) in order to complete work scope in a safe and controlled manner The Requirements To be successful for the position it is essential you hold a CISRS Advanced Scaffolder and Level 3 Rigger certificates. Ideally you will also hold a Banksman/Slinger ticket as well. You will have previous offshore experience and hold valid BOSIET/MIST certificates. It is preferred but not essential if you also hold all or some of the following certification; ERT, HERTL, HLO, Fire Team Leader. Diversity & Inclusion At EnerMech we want to create a diverse and inclusive organisation and grow together to make a vibrant business. We are not there yet, but the desire is steadfast, so please consider a career with us in an organisation where differences in background, culture, education, working style and less obvious differences are respected and celebrated. Company Benefits Generous holiday entitlement Pension scheme Private health cover Various staff discount schemes Employee referral scheme

Location: Madinah, Saudi Arabia We are looking for experienced Turbine Mechanics / Lead Turbine Mechanics with hands-on experience in gas turbine maintenance, overhaul, outage, dismantling, inspection, and reassembly activities . The ideal candidates should have strong mechanical maintenance knowledge, experience working on turbine outages, and the ability to perform precision measurements, controlled bolting, hydraulic torqueing/tensioning, component inspection, and reassembly activities. For the Lead Turbine Mechanic position, candidates should also have proven experience leading turbine maintenance crews We are looking for experienced Turbine Mechanics / Lead Turbine Mechanics with hands-on experience in gas turbine maintenance, overhaul, outage, dismantling, inspection, and reassembly activities . The ideal candidates should have strong mechanical maintenance knowledge, experience working on turbine outages, and the ability to perform precision measurements, controlled bolting, hydraulic torqueing/tensioning, component inspection, and reassembly activities. For the Lead Turbine Mechanic position, candidates should also have proven experience leading turbine maintenance crews. Key Responsibilities Perform dismantling, inspection, maintenance, component replacement, and reassembly of gas turbine components. Remove, identify, protect, and reinstall turbine components within the assigned work scope. Clean mating surfaces and turbine components prior to assembly. Perform and record precision measurements, clearances, dimensions, and runout as required. Use precision measuring instruments including micrometers, vernier calipers, dial indicators, feeler gauges, and calibrated torque tools . Carry out controlled bolting and hydraulic torqueing/tensioning activities. Assist with turbine alignment, bearing, and seal-related work . Inspect components for visible wear, damage, or abnormalities and report findings. Follow approved outage procedures, work scopes, tooling requirements, and replacement-part requirements. Coordinate and work effectively with riggers, I&C technicians, welders, QA/QC personnel, and other maintenance teams . Ensure all maintenance and assembly activities are carried out safely and in accordance with required quality standards. For the Lead Turbine Mechanic role, allocate daily activities to mechanics and supervise turbine maintenance crews. Lead dismantling and reassembly activities within the approved outage scope and ensure proper execution and quality of work. For the Lead role, coordinate turbine maintenance activities under the direction of the OEM field advisor where applicable. Requirements We are looking for experienced Turbine Mechanics / Lead Turbine Mechanics with hands-on experience in gas turbine maintenance, overhaul, outage, dismantling, inspection, and reassembly activities . The ideal candidates should have strong mechanical maintenance knowledge, experience working on turbine outages, and the ability to perform precision measurements, controlled bolting, hydraulic torqueing/tensioning, component inspection, and reassembly activities. For the Lead Turbine Mechanic position, candidates should also have proven experience leading turbine maintenance crews. Key Responsibilities Perform dismantling, inspection, maintenance, component replacement, and reassembly of gas turbine components. Remove, identify, protect, and reinstall turbine components within the assigned work scope. Clean mating surfaces and turbine components prior to assembly. Perform and record precision measurements, clearances, dimensions, and runout as required. Use precision measuring instruments including micrometers, vernier calipers, dial indicators, feeler gauges, and calibrated torque tools . Carry out controlled bolting and hydraulic torqueing/tensioning activities. Assist with turbine alignment, bearing, and seal-related work . Inspect components for visible wear, damage, or abnormalities and report findings. Follow approved outage procedures, work scopes, tooling requirements, and replacement-part requirements. Coordinate and work effectively with riggers, I&C technicians, welders, QA/QC personnel, and other maintenance teams . Ensure all maintenance and assembly activities are carried out safely and in accordance with required quality standards. For the Lead Turbine Mechanic role, allocate daily activities to mechanics and supervise turbine maintenance crews. Lead dismantling and reassembly activities within the approved outage scope and ensure proper execution and quality of work. For the Lead role, coordinate turbine maintenance activities under the direction of the OEM field advisor where applicable. Requirements Lead Turbine Mechanic Minimum 10 years of relevant mechanical experience , including at least 3 years of experience leading turbine maintenance crews . Proven experience leading gas turbine outages, dismantling, inspection, maintenance, and reassembly activities . Relevant turbine model and outage experience is preferred. Strong knowledge of hydraulic torque/tensioning tools and precision measuring instruments . Proven ability to supervise mechanics and coordinate with multidisciplinary maintenance teams. Strong understanding of turbine assembly quality, clearances, alignment, and controlled bolting. Turbine Mechanic Relevant hands-on experience in gas turbine maintenance and assembly . Experience in turbine component removal, inspection, maintenance, replacement, and reinstallation. Hands-on experience with precision measuring instruments and calibrated torque tools . Experience with controlled bolting, hydraulic tensioning, alignment, bearing, or seal-related activities is preferred. Ability to work effectively during turbine outages and maintenance shutdowns . Strong commitment to safety, quality, and following approved work procedures.

Location: Abu Dhabi, United Arab Emirates We are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivaled expertise, equipment, and technology that supports the entire asset life cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline, subsea, process, and valves – all designed to help you optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions.  This approach reduces risk and enhances efficiencies, making us a leading and trusted partner every step of the way. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organization. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities. The Role? The primary responsibility is to support the deck & lifting operations on the client platform as per company processes and procedures and demonstrate safety leadership and continuous development in all aspects of crane, lifting, and support service activities. Main Responsibilities & Key Result Areas Lifting AP shall perform and be responsible for the following: - Is designated to prepare lift plan & procedure as per client & company standard. Is designated as being in charge of planning, coordinating, controlling and executing the lift. Be responsible for coordinating CONTRACTOR's Riggers to conduct all vessel lifts and those on the platform as directed by Crane Supervisor or COMPANY personnel Ensures that people involved are competent for performing their task, aware of the task and procedures to be followed, and aware of their responsibilities. Briefs people involved in or affected by the lift. Ensure all necessary test certificates and other documents are available Shall be responsible for the management of client / COMPANY- owned and supplied loose lifting equipment. Be fully trained and conversant with loose lifting equipment rigging loft management procedures i.e. maintain a lifting equipment data base & issuance register consisting of the following; I. Inventory of equipment. II. Test certificate. III. Damage loss report register Booking in & out sheets detailing the name of person using equipment, date of issue, description etc. In line with clients / COMPANY's Bi-annual lifting equipment campaign assist TPI with inspection & recertification of lifting equipment. Carry out Banking/Signalman duties as and when required. Ensures the lift is carried out following the plan. Suspends the lift if changes or conditions (eg, wind) occur that would cause a deviation from the plan. Plan and risk assess all routine and up to non-routine complicated crane-lifting operations associated with the day-to-day running of the client / COMPANY platforms. Supervise all lifting operation on client / COMPANY platforms, including non-routine complex lifts. once approved by Integrity Division. Selecting the correct crane and accessories for the specific task. Checks that load integrity and stability are satisfactory; Ensure all other statutory requirements and any necessary work permit are in place . Identify all hazards and restricted areas. Emergency Procedures in case of damage or impairment to the crane during operation, and for safe recovery of the crane to a holding location on the installation. Ensuring that the person directing crane movements (Signaller / Banksman) is readily identifiable to the crane operator by wearing high visibility clothing or distinguishing markings. Shall allow for concurrent or simultaneous operations that may affect or be affected by the lift, eg, helicopter operations, ballast control, other cranes. Checks that there is no deviation from standards for routine lifts. Ensuring that the workplace is provided with adequate lighting for night lifting. Complete reports, lifting operation risk assessments, logs and other documentation, as required. Ensure competent supervisor is available should the Appointed Person delegate his duties of part thereof to others Have sufficient general engineering knowledge of loose lifting equipment to carry out daily inspection routines. Ensures that the lifting equipment is maintained, examined and appropriate for use. Carry out platform emergency duties under the direction of nominated personnel. Be multi-skilled in other platform duties including operating of firefighting equipment and undertaking fire standby and deck duties, when required. The Appointed person can delegate his duties to competent personnel however the responsibility is still with the Appointed Person. The Appointed person has the authority to stop operations where danger is likely to arise if operations continue. Requirements Be at least 32 years of age and above. Have at least 3 years Diploma in Mechanical Engineering or equivalent. Knowledge of AutoCAD & MS Office are mandatory. Shall have ADNOC Training center approved certification. Have relevant oil & gas offshore and onshore lifting-related experience of not less than 10 years in the same area of application with 5 years in a similar position. Have adequate training and hands on professional experience and be competent to act as an Appointed Person for lifting equipment. Shall be able to write Lifting plans, and supervise and execute critical lifting in oil & gas companies. Have focus on HSE priorities and lead a team for Safe Lifting Practices across different locations of the organization. Familiar with international standard related to Lifting engineering practices with sufficient knowledge in interpretation and to bring excellence in Change management. Valid OGUK Medical Certificate, BOSIET & H2S. Preferred: Shall have LEEA-UK qualifications "Entry Exam" and 4 day Appointed Person (Supervisor) course by approved Company Training Company.

Location: San Francisco, CA | New York City, NY About Anthropic Anthropic’s mission is to create reliable, interpretable, and steerable AI systems. We want AI to be safe and beneficial for our users and for society as a whole. Our team is a quickly growing group of committed researchers, engineers, policy experts, and business leaders working together to build beneficial AI systems. About the Team Foragers is a new Field Services team within our physical infrastructure organization. We're the boots on the ground for Anthropic's physical infrastructure: the people who get hardware into racks, gear commissioned, and sites handed over. The team is being stood up now, so early hires shape how we operate. This role is the lab-focused counterpart to our traveling field engineers. Instead of covering sites across the country, you own our Bay Area hardware labs from end to end. About the Role Your mission is to ensure our hardware labs are functional, useful, and ready to support the growing number of teams and projects that need access to physical hardware. You’d own what shows up, how it’s powered, cooled, cabled, tracked, set up, and made functional. This includes both standard hardware (think typical accelerator setups) and more specialized ones like ensuring our security teams have access to all the right headers and other hardware instrumentation on the machines. Understanding and anticipating the needs of the various teams that rely on the labs will be another critical part of this role. You’ll be expected to take a lot of ownership and initiative over the lab and what’s in it, including reaching out to partner teams to figure out what they’d need in the future and making sure it’s there before it starts to block them. This will require you to collaborate closely with those partner teams, so a breadth of knowledge around hardware is extremely useful. You’d be the first dedicated lab manager, so part of this role will include shaping it to scale from our current lab to much larger ones. What You’ll Do Run the physical lab across both sites: receiving and staging, rack-and-stack, cabling, power distribution and load planning, cooling, floor layout Bring up new server and accelerator platforms as they arrive, from crate to a machine someone can SSH into: firmware and BIOS/UEFI setup, out-of-band management, OS install, network provisioning Own hardware procurement for the lab: work with teams on what's coming, order ahead of need, chase quotes and lead times, keep receiving and inventory in order Own RMA processes end-to-end for lab hardware: triage, swap, ship, track, close; drive vendor escalations Build the one-off setups engineers ask for: debug and programming harnesses (JTAG/SWD/UART), remote power switching, console and KVM access, and the occasional improvised fix for hardware running outside the conditions it was designed for Oversee smarthands and contractor work on-site (electricians, cabling crews, riggers, integrators, OEM field engineers): scope it, dispatch it, validate the quality Handle physical access, asset auditing, and lifecycle tracking for hardware that is expensive and sometimes pre-release Write it down: build the playbooks and lightweight tooling (inventory, remote power, console access) so remote teams can use the lab without pinging you for every step Who You Are Hands-on experience running a hardware, systems, or datacenter lab, or a similar physical compute environment: rack-and-stack, copper and fiber cabling, power distribution (PDUs, circuits, phase balancing) Working knowledge of server hardware and its management plane: BMC/IPMI/Redfish, BIOS/UEFI configuration, serial console, PXE/network boot, firmware updates Enough Linux and networking (VLANs, DHCP, DNS, basic switch config) to take a bare machine to a state a remote engineer can use Have managed vendors, contractors, quotes, and freight for physical equipment Comfortable and safe with power tools, bench power supplies, and a wiring or rack elevation diagram Work independently with minimal supervision , and know when to ask Bias toward action and comfort with ambiguity: you'd rather move and adjust than wait for perfect information Communicate clearly and directly, especially when flagging risks or blockers Strong Candidates May Also Have Stood up a lab or datacenter room from empty: layout, power and cooling budget, first round of purchasing Time around high-density accelerator systems (GPU/TPU-class racks), liquid cooling, or pre-release/NPI hardware bring-up Electronics bench skills: soldering and rework, scope and multimeter, custom cable and debug harnesses, JTAG probes, light fabrication (3D printing, drilling, mounting) Supported hardware security, firmware, or platform bring-up work Experience with DCIM or asset-management tooling (NetBox, ServiceNow, etc.) Bought hard-to-source or specialty hardware and dealt with the compliance and logistics that come with it Location This role is based in our San Francisco office (500 Howard St). Travel to nearby lab spaces is required so expect to be in-office more frequently than Anthropic's standard 25% hybrid baseline. The annual compensation range for this role is listed below. For sales roles, the range provided is the role’s On Target Earnings ("OTE") range, meaning that the range includes both the sales commissions/sales bonuses target and annual base salary for the role. Annual Salary: $320,000 — $405,000 USD Logistics Minimum education: Bachelor’s degree or an equivalent combination of education, training, and/or experience Required field of study: A field relevant to the role as demonstrated through coursework, training, or professional experience Minimum years of experience: Years of experience required will correlate with the internal job level requirements for the position Location-based hybrid policy: Currently, we expect all staff to be in one of our offices at least 25% of the time. However, some roles may require more time in our offices. Visa sponsorship: We do sponsor visas! However, we aren't able to successfully sponsor visas for every role and every candidate. But if we make you an offer, we will make every reasonable effort to get you a visa, and we retain an immigration lawyer to help with this. We encourage you to apply even if you do not believe you meet every single qualification. Not all strong candidates will meet every single qualification as listed.  Research shows that people who identify as being from underrepresented groups are more prone to experiencing imposter syndrome and doubting the strength of their candidacy, so we urge you not to exclude yourself prematurely and to submit an application if you're interested in this work. We think AI systems like the ones we're building have enormous social and ethical implications. We think this makes representation even more important, and we strive to include a range of diverse perspectives on our team. Your safety matters to us. To protect yourself from potential scams, remember that Anthropic recruiters only contact you from @anthropic.com email addresses. In some cases, we may partner with vetted recruiting agencies who will identify themselves as working on behalf of Anthropic. Be cautious of emails from other domains. Legitimate Anthropic recruiters will never ask for money, fees, or banking information before your first day. If you're ever unsure about a communication, don't click any links—visit anthropic.com/careers directly for confirmed position openings. How we're different We believe that the highest-impact AI research will be big science. At Anthropic we work as a single cohesive team on just a few large-scale research efforts. And we value impact — advancing our long-term goals of steerable, trustworthy AI — rather than work on smaller and more specific puzzles. We view AI research as an empirical science, which has as much in common with physics and biology as with traditional efforts in computer science. We're an extremely collaborative group, and we host frequent research discussions to ensure that we are pursuing the highest-impact work at any given time. As such, we greatly value communication skills. The easiest way to understand our research directions is to read our recent research. This research continues many of the directions our team worked on prior to Anthropic, including: GPT-3, Circuit-Based Interpretability, Multimodal Neurons, Scaling Laws, AI & Compute, Concrete Problems in AI Safety, and Learning from Human Preferences. Come work with us! Anthropic is a public benefit corporation headquartered in San Francisco. We offer competitive compensation and benefits, optional equity donation matching, generous vacation and parental leave, flexible working hours, and a lovely office space in which to collaborate with colleagues. Guidance on Candidates' AI Usage: Learn about our policy for using AI in our application process.

Location: Abu Dhabi, United Arab Emirates About EnerMech: We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivaled expertise, equipment, and technology that supports the entire asset life cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline, subsea, process, and valves – all designed to help you optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions. This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organization. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities. Job Overview: The primary responsibility is to support the deck operations on the client platform as per EnerMech processes and procedure and demonstrate safety leadership and continuous development in all aspects of crane, lifting and support service activities. Key Responsibilities: Operate platform pedestal and overhead gantry cranes under the direction of nominated platform personnel and in accordance with manufacturer's instructions and platform operating procedures. The crane operator should only respond to the instruction (signals) given by the Rigger or appointed Signaler, he shall follow the Emergency Stop Signal from any one at site in case of any emergency. Carry out daily pre-operational checks on the cranes in accordance with pre-use checklist. The crane Operator shall also be responsible for reporting all defects noted during operation of the crane to the crane supervisor. Able to set and check the functioning of the rated capacity limiter and rated capacity indicator. Responsible for effectively carrying out scheduled planned maintenance routines up to (6monthly) of all offshore pedestal and overhead cranes, with the objective of maintaining safe operations. Maintain cranes in a clean and tidy condition, including cabs, machinery housing and external surfaces. Carry out Platform Emergency Duties under the direction of nominated personnel. Keep a logbook of crane operations. In addition to crane maintenance duties, operate overhead cranes under the direction of nominated site personnel and in accordance with authorized operators instructions manual and site operating procedures. When working overhead cranes, carry out daily routine on the crane in accordance with maintenance procedures and pre-start checklist. Inspect the job site to ensure compliance with safe practices and procedures. Maintain quality of safety in the crane group and participate in the site safety reviews i.e. Near Miss Reporting/STOP cards. Responsible for giving a detailed report of any crane incidents to the Crane Supervisor. Requirements All Crane Operator Maintainer must read and write English fluently, be experienced, fully trained and competent in the operation and maintenance of offshore pedestal cranes. The Crane Operator Maintainer shall have adequate understanding of the capabilities and limitations of each crane with regard to offshore operation, and of the various installed mechanisms, control and safety systems. A minimum 21 years of age. Educated to a minimum qualification of higher secondary school certificate or HNC or equivalent qualification. At Least a minimum of 5 years' experience in an offshore/onshore experience and a minimum of 3 years in similar position. Have an Offshore Stage 3 Crane Operator certificate. Crane Operator Maintainer shall have sufficient general engineering knowledge of the lifting equipment to carry out routine maintenance and inspection routines up to 3 monthly PM. Crane Operator Maintainer shall assist mechanics and ad-hoc crew in completing, routine maintenance, major maintenance, troubleshooting and breakdown maintenance. Crane Operator Maintainer shall also be multi-skilled in other platform duties including operating firefighting equipment and undertaking fire standby duties, acting as slinger, Banks man/Signal man, Rigger and deck duties, when required. Crane Operator Maintainer shall complete reports, logs and other documentation, as required & shall maintain the cranes in clean condition, internally and externally. Benefits Basic day rate and offshore allowance Rotational Allowances Training allowance Over time allowance Rotation 56/28

Location: Dammam, Saudi Arabia; Al Khobar, Saudi Arabia Eram Talent is seeking a knowledgeable and experienced Heavy Equipment Trainer / Assessor to join our dynamic team. The Assessor is responsible for the development, implementation, reporting and analysis of all certifications as assigned. He/She will be a part of the Certification Team the HE Assessor will ensure that the written/performance sections of the certifications are developed and maintained as per the company policy for the following disciplines; Rigging, Crane Operator and Heavy Equipment Operator (Backhoe- Bulldozer- Forklift- Grader- Wheel loader- Skid loader- Backhoe loader- Sideboom Telehandler… etc) Key Responsibilities Perform the following assessments to make sure about the operator’s competency: - Heavy Equipment assessment (Backhoe- Bulldozer- Forklift- Grader- Wheel loader- Skid loader- Backhoe loader- Sideboom Telehandler… etc). - Crane assessment. - Rigger assessment. Assist to develop written and practical assessments in their field of expertise. Ensure that all assessments are completed efficiently and professionally. Complete the analysis of all assessments. Take on Mentoring responsibilities as required. Assist with QA Audits. Assist with Policy and Procedural reviews and development. Uphold the companies HE Certifications Unit Policy. Requirements Minimum of 5 years of experience operating heavy equipment. Proven experience in training or assessment roles, preferably in the heavy equipment or construction industry. Experience in training areas such as Backhoe- Bulldozer- Forklift- Wheel loader- Backhoe loader, cranes etc Valid certifications and licenses for operating heavy machinery. Strong knowledge of safety regulations and operational procedures related to heavy equipment. Excellent communication and presentation skills. Ability to evaluate and provide constructive feedback to trainees. Strong organizational skills and attention to detail.

Location: Al Jubail, Saudi Arabia; Riyadh, Saudi Arabia; Karachi, Pakistan Responsible for the safe and efficient operation of cranes and forklifts to lift, transport, load, and position equipment, supplies, and materials around the rig site. Ensures all lifting and material-handling activities are performed in compliance with safety regulations and operational procedures. Key Responsibilities Operate cranes and forklifts to move equipment, materials, and supplies safely within the rig site Conduct pre-operation inspections of cranes, forklifts, and lifting accessories Follow approved lifting plans, load charts, and rigging signals Ensure proper securing, lifting, and placement of loads Maintain clear communication with riggers, signalmen, and supervisors Comply with all site safety rules, permits, and SOPs Report equipment defects, unsafe conditions, or incidents immediately Maintain basic operation logs and inspection records Qualifications & Requirements Valid Crane Operator and/or Forklift Operator certification/license Proven experience operating cranes and forklifts in industrial or rig environments Knowledge of safe lifting practices and load limits Ability to follow hand signals and radio communication Physically fit to work in site and rig conditions Experience Minimum 5 years of relevant operating experience preferred