Вакансии

Location: Houston, United States We are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves – all designed to help our clients optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions.  This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. The Role and Responsibilities EnerMech have a new opportunity for a Hydraulic Technician, Tube Instrument Fitter to join the Fluid Power Products team in Houston. This role is responsible for the fabrication, installation, inspection, testing, and maintenance of stainless steel hydraulic and instrumentation tubing systems ranging from 1/4" to 2" in diameter. This position requires the ability to interpret engineering drawings and P&IDs, fabricate precise tubing runs, perform coning and threading for medium- and high-pressure tubing, install tubing supports, and ensure all hydraulic systems meet customer specifications and industry safety standards. The Requirements Essential Duties and Responsibilities Install, bend, route, and secure stainless steel tubing from 1/4" through 2" OD. Fabricate tubing assemblies using manual and hydraulic tube benders. Measure, cut, deburr, clean, and prepare tubing for installation. Cone and thread medium-pressure (MP) and high-pressure (HP) stainless steel tubing using manufacturer-approved tooling and procedures. Install MP and HP tubing connections, glands, collars, and pressure fittings in accordance with manufacturer specifications. Install compression fittings, pipe fittings, valves, manifolds, clamps, supports, and hydraulic components. Read and interpret hydraulic schematics, P&IDs, isometric drawings, and fabrication drawings. Ensure proper tube routing, spacing, support, bend radii, and fitting alignment to prevent vibration, fatigue, and leaks. Perform pressure testing, flushing, and leak testing of hydraulic systems. Troubleshoot hydraulic systems and repair tubing, fittings, valves, and component failures. Install and torque hydraulic fittings in accordance with manufacturer specifications. Maintain hydraulic system cleanliness to minimize contamination and ensure system reliability. Perform preventative maintenance and repairs on hydraulic equipment. Operate tubing fabrication equipment including tube benders, coning and threading machines, flaring tools, saws, threaders, and pressure testing equipment. Document completed work, inspection results, and pressure test records. Maintain a safe and organized work environment while complying with company safety policies. Travel to customer facilities and offshore/onshore job sites as required. Required Qualifications High school diploma or GED. Minimum of 3 years of hydraulic tubing installation or related industrial experience. Experience installing 316 stainless steel tubing from 1/4" through 2". Experience coning and threading MP and HP stainless steel tubing. Knowledge of medium- and high-pressure tubing systems and pressure-rated fittings. Proficient in the use of hand tools, power tools, tube benders, and coning/threading equipment. Ability to read and interpret hydraulic schematics and engineering drawings. Knowledge of compression fitting systems such as Parker A-LOK, Swagelok, Hy-Lok, Autoclave Engineers, HIP, or equivalent. Strong mechanical aptitude and troubleshooting skills. Ability to work independently and as part of a team. Valid driver's license and ability to travel as required. Preferred Qualifications Experience in oil & gas, petrochemical, pipeline, offshore, or industrial environments. Experience with hydraulic flushing, cleanliness verification, and hydrostatic pressure testing. Experience assembling and testing hydraulic control panels, manifolds, and power units. Forklift, aerial lift, or overhead crane certification. TWIC Card. OSHA 10 or OSHA 30 certification. Physical Requirements Ability to lift up to 50 pounds. Ability to stand, kneel, bend, climb ladders, and work in confined spaces. Ability to work outdoors in varying weather conditions. Ability to wear required personal protective equipment (PPE). Knowledge, Skills, and Abilities Excellent attention to detail and workmanship. Strong understanding of hydraulic systems, fluid power principles, and pressure-containing tubing systems. Ability to fabricate neat, accurate, leak-free tubing installations. Strong communication and problem-solving skills. Ability to prioritize multiple tasks while meeting project deadlines. Commitment to quality, safety, and customer satisfaction. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities.

Location: Al Jubail, Saudi Arabia Eram Talent is hiring for Instrument Technicians for one of their prestigious petrochemical client in Jubail, Saudi Arabia. In this role, you will be responsible for maintaining, troubleshooting, calibrating, and repairing plant instrumentation—including electronic, pneumatic, and safety-critical systems—to ensure safe and reliable refinery operations. Responsibilities Safety & Maintenance: Follow plant safety standards, recognize hazards, carry out preventive maintenance (PM) procedures, and maintain clean work areas and workshop tools. Troubleshooting & Overhauling: Diagnose and repair pneumatic/electronic instrument issues. Overhaul control valves, controllers, Rosemount smart transmitters, boilers, and furnaces. Calibration & Loop Tuning: Calibrate plant equipment to ISO standards, tune field controllers/PID settings, and service analytical instruments (O2, CO, CO2, pH, and conductivity meters). Critical Systems Maintenance: Test safety-critical devices, Emergency Shutdown (ESD) interlocks, turbine/compressor instrumentation, Bently Nevada monitoring systems, and fire/flame detection systems. Technical Drawings: Read and interpret P&IDs (Piping and Instrumentation Diagrams) and instrument loop drawings. Requirements Education: 2-year Technical Diploma or Industrial Trade Training Certificate from a recognized institution. Experience: 6 to 8 years of hands-on work experience as an Instrument Technician in a refinery or petrochemical plant. Documentation: Experience certificate from a process or construction company. Language: Good command of English (ability to read, write, and speak clearly).

Location: Yanbu, Saudi Arabia; Jeddah, Saudi Arabia; Al Khobar, Saudi Arabia; Manila, Philippines; Lahore, Pakistan; Delhi, India Eram Talent is seeking a highly skilled Instrument Foreman to join our dynamic team. As a prominent Talent Acquisition Consultancy, we focus on connecting top-tier professionals with leading organizations in the Oil & Energy sector. In this pivotal role, you will oversee and coordinate instrumentation activities on-site, ensuring that all work is executed according to project specifications and industry standards. The Instrument Foreman will be responsible for managing a team of instrumentation technicians, providing guidance and support to ensure timely and efficient completion of assigned tasks. You will work closely with project managers and engineers to align activities with project timelines and safety protocols. Responsibilities Supervise and coordinate the installation, testing, and maintenance of instrumentation systems and equipment. Lead and motivate a team of instrumentation technicians, ensuring clear communication and adherence to safety standards. Plan and schedule instrumentation work according to project requirements and timelines. Conduct regular inspections of ongoing work to ensure quality and compliance with specifications. Provide technical support and training to team members on best practices and safety procedures. Maintain accurate records of work performed and report progress to project management. Requirements High school diploma or equivalent; technical degree or certification in instrumentation or a related field is preferred. Minimum of 5 years of experience in instrumentation with at least 3 years in a supervisory role. Strong knowledge of instrumentation systems, including calibration, installation, and troubleshooting. Proven leadership skills and the ability to manage a team effectively. Excellent communication skills and the ability to work collaboratively in a team environment. Familiarity with health and safety regulations relevant to instrumentation operations. Ability to interpret technical drawings and schematics related to instrumentation. Filed experience related water metering, water pipe fitting , electromagnet water flow meters  , flow measurement maintenance , calibration of water meters etc.

Location: Al Jubail, Saudi Arabia We are looking for a skilled Technical Trainer - Instrumentation to join our dynamic team. As part of our commitment to providing talented professionals across various sectors, this role focuses on training and developing personnel in the field of instrumentation engineering and technology. The Technical Trainer will be responsible for designing, developing, and delivering training programs related to instrumentation systems, including installation, operation, maintenance, and troubleshooting. This role requires strong technical expertise combined with effective communication and instructional skills to ensure trainees gain the necessary knowledge and skills to excel in their roles. Responsibilities Deliver technical training programs in instrumentation for students and professionals Develop and update training materials aligned with industry standards Conduct competency-based assessments and evaluate trainee performance Ensure training quality, compliance, and continuous improvement Collaborate with internal teams and industry partners to meet training objectives Requirements Minimum 8 years of industry experience, with at least 5 years as a trainer or within technical training institutes Background in Oil & Gas or EPC industries (GCC experience preferred) Strong English communication skills Experience in competency-based assessment is desirable A1/V1 or D32/D33 vocational assessment qualifications preferred Benefits Salary is not a constraint ,company is looking for right candidate .

Location: Abu Dhabi, United Arab Emirates; Mumbai, India Eram Talent is urgently seeking an experienced Instrumentation Design Engineer for the Oil & Gas sector for their client based in Abu Dhabi. This immediate requirement is for a professional who can contribute to the design and development of instrumentation systems tailored for oil and gas projects. The Instrumentation Design Engineer will be responsible for creating detailed designs, specifications, and documentation that meet client standards and industry regulations. The role involves close collaboration with project teams to ensure engineering solutions are practical, efficient, and compliant. Responsibilities Develop and deliver instrumentation design and drafting for oil & gas facilities, including: Instrument layout drawings Hook-up drawings Instrument index and data sheets Junction box layouts and wiring diagrams Cable routing and tray layouts related to instrumentation Installation details and typical drawings Create and manage 3D instrumentation models using SP3D / E3D Prepare, update, and maintain 2D drawings using AutoCAD and MicroStation Coordinate with Instrumentation Engineers, Electrical, Piping, Process, and Mechanical disciplines to ensure design integration Ensure compliance with: Project specifications Client standards International codes and industry best practices Incorporate review comments from clients, licensors, and internal stakeholders Support design activities during FEED, detailed engineering, and EPC phases Meet project schedules and ensure quality deliverables within defined timelines Requirements Diploma or Degree in Instrumentation / Electronics Engineering (or equivalent) Minimum 15+ years of relevant experience as an Instrumentation Designer Mandatory oil & gas industry experience , preferably within EPC/consultancy environments Strong hands-on expertise in: SP3D / E3D AutoCAD MicroStation Extensive experience on greenfield and brownfield projects Ability to work independently with minimal supervision Strong understanding of instrumentation design standards and practices (ISA, IEC, project-specific standards) Benefits The proposed total package would be 12,500 AED. Benefits: Annual vacation pay End of service Medical insurance - single status Contract status: single Annual airfare (single status)

Location: Dammam, Saudi Arabia; Dhahran, Saudi Arabia; Al Khobar, Saudi Arabia Eram Talent is in search of highly skilled professionals to fill the roles of Mechanical Inspector & Machinist, Electrical, Instrument, and Vibration Specialist. As a leading Talent Acquisition Consultancy within the Oil & Energy sector, we are dedicated to providing premium recruitment solutions. Our focus is on sourcing top-tier professionals who bring exceptional skills across various sectors, including Oil & Gas, Petroleum, Infrastructure, Energy, Water, Transportation, Science & Technology, and Health Care. The selected candidates will play a crucial role in ensuring the quality and reliability of mechanical, electrical, and instrumentation systems. You will be responsible for conducting inspections, assessments, and vibration analysis to maintain the functionality and compliance of specialized equipment. Responsibilities Conduct inspections and assessments as a Mechanical Inspector to evaluate the integrity and quality of mechanical systems. Perform precision machining tasks to ensure the quality of mechanical components. Oversee electrical installations and equipment to verify compliance with safety and operational standards. Manage instrumentation systems to ensure they meet operational requirements for various projects. Conduct vibration analysis on mechanical components to identify problems and recommend solutions. Collaborate with project teams to ensure that quality standards and safety practices are upheld during inspections and repairs. Maintain thorough documentation of inspection findings and provide accurate reporting on project developments. Provide technical guidance to other team members regarding mechanical, electrical, and instrumentation systems. Requirements Minimum of 5 - 15 years of experience in a combined role of Mechanical Inspection & Machining, and Electrical/Instrument/Vibration specialties. Proven experience in the Oil & Energy sector with a strong focus on inspection and maintenance. Valid certifications in relevant fields such as API 510 for Mechanical Inspection, Electrical Safety , and Instrumentation Certifications . Demonstrated expertise in precision machining techniques and processes. Strong knowledge of vibration analysis methods and tools. Thorough understanding of industry standards and regulations, including API, ASME, and ISO. Proficiency in interpreting technical drawings, specifications, and schematics. Excellent attention to detail, with the ability to identify and document non-conformances effectively. Strong interpersonal and communication skills for effective collaboration within teams. Willingness to travel or relocate as necessary for project work in the region.

Location: Dhahran, Saudi Arabia; Al Khobar, Saudi Arabia; Dammam, Saudi Arabia We are looking for a highly motivated and enthusiastic Instrumentation Engineer – Fresh Graduate to join our engineering team. This entry-level role offers an excellent opportunity to apply academic knowledge in real-world projects, work alongside experienced professionals, and grow within a dynamic and innovative organization. Key Responsibilities: Assist in instrumentation system design, calibration, and testing Support in installation and commissioning activities Troubleshoot and maintain sensors, transmitters, and control devices Prepare technical documentation and reports Ensure compliance with safety and engineering standards Qualifications: Bachelor’s degree in Instrumentation Engineering Recent graduate (2025) from an accredited university Basic knowledge of PLCs, DCS, SCADA, and field instruments Strong analytical and communication skills Proficiency in English and Arabic is required

Location: Riyadh, Saudi Arabia Join Müller's Solutions as a Legal Expert in Regulatory Instruments and play a vital role in ensuring our organization adheres to legal standards and regulations. In this position, you will provide expertise in the analysis, interpretation, and implementation of regulatory instruments, helping us navigate complex legal landscapes and mitigate risk. Responsibilities: Review, analyze, and interpret regulatory instruments to ensure compliance with applicable laws and regulations. Provide legal advice and guidance to internal teams regarding regulatory matters. Conduct legal research and stay updated on changes in laws and regulations that may impact the organization. Assist in drafting and reviewing legal documents, contracts, and agreements related to regulatory compliance. Collaborate with cross-functional teams to implement compliance programs and ensure adherence to legal standards. Train and educate staff on regulatory requirements and best practices. Engage with regulatory bodies and represent the organization in legal matters as needed. Prepare reports and documentation related to compliance and regulatory activities. Requirements Requirements: Law degree (JD or equivalent) with a specialization in regulatory law or compliance. Proven experience as a legal expert or regulatory compliance officer, preferably in a corporate environment. Strong knowledge of regulatory frameworks and legal standards relevant to the industry. Excellent research, analytical, and problem-solving skills. Ability to communicate complex legal concepts clearly and concisely to non-legal stakeholders. Strong attention to detail and ability to manage multiple priorities. Experience in drafting and reviewing legal documents and contracts. Excellent interpersonal and negotiation skills. Ability to work independently and collaboratively within a team.

Location: United States Are you interested in working directly for a single sponsor while having the security and additional career opportunities that working for a global CRO can bring? Our team says it’s the best of both worlds... ClinChoice is searching for a Associate Director, Biostatistics Consultant  – Oncology to join one of our clients. We are seeking an experienced and highly motivated Associate Director of Biostatistics with strong expertise in oncology clinical development to provide statistical leadership across clinical trials and development programs. The successful candidate will lead statistical strategy, oversee the design and analysis of clinical studies, ensure the quality of statistical deliverables, and collaborate closely with cross-functional teams to support clinical development and regulatory submissions. This role requires extensive knowledge of oncology clinical trials, strong leadership capabilities, and the ability to provide strategic statistical guidance to internal teams and external stakeholders. Key Responsibilities Provide statistical leadership and strategic guidance for oncology clinical development programs, including Phase I–III clinical trials. Lead the development and review of statistical analysis plans (SAPs), statistical methodologies, sample size calculations, and randomization strategies. Provide expertise in oncology endpoints, including overall survival (OS), progression-free survival (PFS), objective response rate (ORR), duration of response (DoR), and disease control rate (DCR). Oversee the statistical analysis of clinical trial data, including time-to-event analyses, Kaplan–Meier estimation, Cox proportional hazards models, and other appropriate statistical methods. Review and provide oversight of clinical study reports (CSRs), tables, listings, figures (TLFs), and other statistical deliverables to ensure scientific accuracy and regulatory compliance. Support regulatory submissions and interactions with health authorities, including the FDA, EMA, and other global regulatory agencies. Provide statistical input into clinical study protocols, clinical development plans, and integrated analyses. Collaborate with Clinical Development, Clinical Operations, Data Management, Statistical Programming, Medical Writing, and Regulatory Affairs teams. Serve as a statistical subject matter expert in client meetings, project discussions, and strategic planning sessions. Mentor and provide technical guidance to biostatisticians and other statistical team members. Ensure adherence to applicable regulatory guidelines, industry standards, and internal quality procedures. Contribute to business development activities, including proposal development, feasibility assessments, and client presentations, as needed. Qualifications PhD in Statistics, Biostatistics, or a closely related quantitative discipline; a Master’s degree with substantial relevant experience may also be considered. Extensive experience in biostatistics within the pharmaceutical, biotechnology, or contract research organization (CRO) industry. Strong experience supporting oncology clinical trials, preferably across multiple phases of clinical development. Demonstrated expertise in survival analysis, time-to-event endpoints, clinical trial design, hypothesis testing, and statistical modeling. Thorough understanding of oncology efficacy endpoints, response assessment criteria such as RECIST, and relevant clinical development considerations. Experience preparing and reviewing SAPs, CSRs, regulatory submission documents, and integrated analyses. Knowledge of FDA, EMA, ICH, and other applicable regulatory guidelines. Strong leadership, communication, problem-solving, and stakeholder management skills. Ability to manage multiple projects, prioritize deliverables, and work effectively in a collaborative, fast-paced environment. The Application Process Once you have submitted your CV, you will receive an acknowledgement that we have received it. If you have the requirements we need, you will be invited for a phone interview as the first step.  Unfortunately, due to the number of applications we receive, we cannot reply to everyone individually if you are not successful. Who will you be working for? About ClinChoice ClinChoice is a global full-service CRO specializing in clinical development and functional solutions for pharmaceutical, biotechnology, medical device, and consumer health companies. We have over 28 years of proven high-quality delivery and results across all our services, with over 4,000 professionals in more than 20 countries across the Americas, Europe, and Asia-Pacific. Our Company Ethos Our mission drives our culture: to contribute to a healthier and safer world by accelerating the development and commercialization of innovative drugs and devices. Our employees are the most valuable company asset, and they are the fulcrum around which all ClinChoice activities are built, and close management and training are the core instruments to develop and maintain highly-qualified personnel. The continuous training keeps the resources qualified in terms of competence and expertise and gives all personnel the clear tools needed to manage both internal and client processes with the same methodology.   The success of these core values is evidenced by our low industry-average turnover rates. ClinChoice is an equal opportunity employer. We have based our success on attracting, developing, and promoting talent, guided by a commitment to diversity and inclusivity. Our employees come from very diverse backgrounds: gender, race, beliefs, and ethnicities. We recognize this is our strength and celebrate it. #LI-TT1 #LI-Remote #LI-Associate Director #Contract

Location: Washington, United States Workplace: remote We're looking for an experienced Senior SEC Reporting & Technical Accounting Manager to join our Global Financial Reporting team. You will own technical accounting positions on complex, non-routine transactions and help build our SEC-style external reporting, working closely with teams across our global operations. If you love getting technical, take ownership of problems end to end and want to shape reporting at a fast-growing global company, we look forward to your application! Key Responsibilities Serve as the subject matter expert on complex transactions, including M&A and business combinations (ASC 805), financing transactions, revenue recognition (ASC 606), impairment, financial instruments and foreign currency matters. Prepare and review SEC-style financial statements, footnotes and disclosures, and help build the processes behind them to public company standards. Research, document and conclude on technical accounting matters under US GAAP, drafting clear position memos and related journal entries. Develop and maintain accounting policies so they are applied consistently across our global entities and stay aligned with new standards and SEC guidance. Partner with global accounting teams, FP&A, Legal and HR to evaluate the accounting impact of deals, financings, commercial arrangements and new initiatives. Work closely with external auditors to align on accounting conclusions, support audit reviews and resolve technical issues. Own issues end to end: solve them independently and bring clear recommendations rather than escalating. Support internal control design and SOX readiness for technical accounting and reporting processes. Skills, Knowledge & Expertise Active CPA license. 8 to 12 years of experience, including Big 4 audit or advisory and technical accounting or SEC reporting for a public filer. Hands-on US GAAP expertise in M&A, financing transactions and revenue recognition, plus impairment, financial instruments and FX. Experience at technology or IT companies with revenue between $500M and $2.5B is a strong plus. NetSuite experience is a plus. Strong research and memo-writing skills: you drive to conclusions on technical matters and explain them clearly to auditors, management and non-accountants. Independent problem solver with a strong sense of ownership. Effective cross-functional partner, comfortable working with global teams across time zones. Based in the United States, in the Eastern or Central time zone. Job Benefits Help us challenge injustice by creating fair choices for millions of people across 1100+ cities in 48 countries. Develop your professional skills with access to mentoring, career consulting, and learning programs. Collaborate with teams around the world and gain international experience through our Global Talent Exchange Program. Engage in company-wide challenges, awards, sports activities, employee-led social impact and volunteering projects. Work alongside people who take initiative, speak openly, and challenge themselves to grow. Improve your language skills through co-financed courses and internal speaking clubs. Please note: final benefits may vary by location. Country-specific benefits will be added to the offers later.

Location: Oman PIPECARE is seeking Data Analyst to join our team in Oman, specializing in the oil and gas industry. PIPECARE provide complete Solutions to all aspects of all aspects of In Line- Solutions in the oil and gas industry and ensure pipeline integrity by providing highly accurate information for Maintenance and Repair Programs. Position Summary General role for the Data Analyst includes identification obstructions in the pipeline. It shall be noted that PIPECARE has Subsidiaries around the world and although Data Analyst reports to Data Analyst Team Leader of that Subsidiary and to the corporate Data Analyst Manager, the responsibility of the Data Analyst is to ensure that all tasks and projects related to local subsidiary are executed according to the plan, corporate standards and policy approved by the Corporate Office. Key Responsibilities & Authorities Checking and approving the tool performance during the PTT. Checking the data quality of ILI runs. Caliper Data Analysis. MFL Data Analysis. TFI Data Analysis. Checking and implementing dig verification tasks at sites and preparing relevant reports. Reviewing the software inter phase. Reviewing software user manuals. Preparing/Reviewing DAD quality documentation. To ensure accurate tool sensitivity values are provided to TM in Tool Checklist. To prepare a specific Run assessment report. To identify obstructions in the pipeline; to produce technically valid Preliminary / Final report (if applicable). To produce technically valid Preliminary / Final report. To inform HO-DAD about the results and/or to implement the results into the reports. To ensure that the coordinates are synchronized with the data. To alert the R&D regarding the software problems. To update the documentation. To produce updated standard quality procedures. To alert the DA Team Leader / DA Manager regarding the software problems. Execute all other tasks as requested by DA Team Leader or DA Manager and/or Executive Team within the assigned job role. Skills/Experience required. Bachelor’s degree in engineering/technology, OR related degree (preferred but not limited to GIS Field, petrochemical background, pipeline integrity). Prior certification as ILI ASNT-PQ L2, or L3 Data Analyst in one or more of the following in-line inspection technologies: UTWM, UTCD, EMAT; or the ability to become certified Experience in contacts with clients (report presentations, software trainings etc.) Ability to learn proprietary software platforms; proficiency in Microsoft based applications is a must Database development and implementation experience Process analysis, requirement / functional specification development experience Quality assurance of databases, reporting experience Experience of working on large, complex and multiple databases Proficient in using analytical tools and instruments for instance Excel, Microsoft Access, Minitab and SPSS High ability to work with numbers Strong written and verbal communication skills Analytical mind which is able to process information logically Professional level of English language.

Location: Sharjah, United Arab Emirates Pipe Care Group of companies has been helping customers ensure the integrity of their pipeline and facility assets for over 20 years. Pipe Care Group is looking for an experienced Electronics Technician who work with engineering - recommend changes in design and manufacturing procedures and to identify the source of the technical problem and suggest solution. Key Responsibilities & Authorities To follow written and/or verbal instructions assemble products to schematics and/or design specifications using a variety of Testing equipment, hand tools including some precision soldering techniques To test, troubleshoot and repair completed products and field returns as required. To assemble experimental circuitry or complete prototype model according to design, engineering instructions, technical manuals, and knowledge of electronic systems and components To operate drills, or other machine tools to fabricate parts, such as coils or other electronics section’s related parts To enter daily report in to ERP Mold Crab, Flap, Connectors, etc. Maintain work areas in a neat and tidy manner in line with HSE standards, To conduct pressure testing Soldering and Preparation of External and Internal Electronics Winding of Coils, Preparation of Tool Accessories Testing of soft wares and hardware Molding using MS1000 Pressure test of External Electronics and Containers Final Check on Tools Calibration of Tools Testing of incoming PCBs Preparation for R&D and Internal Projects. Skills/Experience: Bachelor’s degree in Electronics Engineering, or a related field Minimum 3-5 years of work experience 3Basic knowledge and experience in electronic instrumentation and measurements Attention to detail, quality focus Good experience of soldering, calibration and testing on electronic PCBs & equipment Stress resistant Good verbal communication skills (in English – desirable) Creative, critical and curious.

Location: Suez, Egypt Pipe Care Group of companies has been helping customers ensure the integrity of their pipeline and facility assets for over 20 years. Pipe Care Group is looking for an experienced Electronics Technician who work with engineering - recommend changes in design and manufacturing procedures and to identify the source of the technical problem and suggest solution. Key Responsibilities & Authorities To follow written and/or verbal instructions assemble products to schematics and/or design specifications using a variety of Testing equipment, hand tools including some precision soldering techniques To test, troubleshoot and repair completed products and field returns as required. To assemble experimental circuitry or complete prototype model according to design, engineering instructions, technical manuals, and knowledge of electronic systems and components To operate drills, or other machine tools to fabricate parts, such as coils or other electronics section’s related parts To enter daily report in to ERP Mold Crab, Flap, Connectors, etc. Maintain work areas in a neat and tidy manner in line with HSE standards, To conduct pressure testing Soldering and Preparation of External and Internal Electronics Winding of Coils, Preparation of Tool Accessories Testing of soft wares and hardware Molding using MS1000 Pressure test of External Electronics and Containers Final Check on Tools Calibration of Tools Testing of incoming PCBs Preparation for R&D and Internal Projects. Skills/Experience: Bachelor’s degree in Electronics Engineering, or a related field Minimum 3-5 years of work experience 3Basic knowledge and experience in electronic instrumentation and measurements Attention to detail, quality focus Good experience of soldering, calibration and testing on electronic PCBs & equipment Stress resistant Good verbal communication skills (in English – desirable) Creative, critical and curious.

Location: Houston, TX, United States Position Summary The Electronics Technician - ILI Systems & Equipment owns the full lifecycle of PIPECARE Western Hemisphere’s electronics assets - bench-level preparation, testing, calibration, repair, and reliability support across the region’s inspection technologies (Caliper, MFL, UTWM/UTCD, and EMAT), the tracking and locating equipment that supports every mobilization (AGM units, toolmounted transmitters, and pig locators) - together with management of the electronics store, tool inventory, consumables, and the component requisitioning that ties it all together. Given the size of WH’s tool fleet and its annual tool-prep volume, this is designed and resourced as a single-incumbent role covering both functions. It shall be noted that PIPECARE has subsidiaries around the world and, although the Electronics Technician reports to the Shop Supervisor, the responsibility of the Electronics Technician is to ensure that all tasks related to the Western Hemisphere are executed according to the plan, corporate standards, and policy approved by the Corporate Office. Job Functions, Responsibilities & Authorities A. Tool Preparation, Testing & Calibration • Follow approved written instructions, schematics, and design specifications to assemble and prepare Caliper, MFL, UTWM/UTCD, and EMAT tools, using test equipment, hand tools, and precision soldering techniques. • Perform electronic assembly, soldering, rework, and inspection in accordance with approved workmanship procedures, ESD-control requirements, and applicable IPC standards. • Perform bench and pull-rig/test-loop calibration of sensors, magnetizers, transducers, odometer wheels, and IMUs against reference standards ahead of every mobilization, in accordance with approved procedures and calibration requirements. • Execute dry-run and pull-test acceptance procedures; a tool is not released until every acceptance criterion is met and signed off. • Conduct pressure testing of external electronics and containers. • Perform final check, calibration, and sign-off on tools prior to mobilization. • Assemble experimental circuitry or prototype builds per engineering instructions for R&D and internal projects. B. Battery & Power Systems • Build, test, and capacity-verify battery packs against run-duration requirements, with margin for delays • Rebuild, rewire, and replace battery packs and individual cells only in accordance with approved procedures, applicable safety requirements, and authorized competency limits. • Monitor pack health and flag batteries approaching end-of-life before they cause a field failure. • Ensure battery packs are handled, packaged, labeled, and documented correctly for every shipment, domestic and cross-border, in accordance with applicable DOT/IATA lithiumbattery transportation requirements and company procedures. C. Tracking & Locating Equipment (AGM, Transmitters & Pig Locators) • Prepare, install, and battery-test tool-mounted tracking transmitters (electromagnetic, acoustic, or magnetic) ahead of every mobilization, confirming signal strength and battery life cover the full expected run duration. • Maintain and pre-run test Above Ground Marker (AGM) units: battery and solar power systems, antenna and geophone accessories, GPS time synchronization, and onboard data storage. • Maintain and battery-test handheld and vehicle-mounted pig locators/receivers used by field crews to track tool progress and pinpoint a stopped or stuck tool. Maintain pig signallers and passing indicators at launch, receive, and key trap locations, including mechanical trigger, battery, and alarm function checks. • Retrieve and back up AGM passage data after each run and provide it promptly to the Data Analysis team in the required format for odometer/IMU correlation. • Troubleshoot and repair faulty tracking equipment returned from the field; hold any unit that fails pre-run acceptance out of service until repaired and re-tested. • Maintain a dedicated inventory of spare transmitters, AGM units, locators, batteries,and antennas sized to WH’s mobilization schedule, so a failed unit never delays a launch. D. Repair, Troubleshooting & Continuous Improvement • Test, troubleshoot, and repair completed tools, field returns, and incoming PCBs in accordance with approved procedures and electronic workmanship requirements. • Perform component-level fault diagnosis using multimeter, oscilloscope, and related diagnostic equipment • Operate drills and other machine tools to fabricate or repair tool components (flaps, connectors, etc.) • Lead or support root-cause analysis on any tool that underperforms or fails in the field, and close out the resulting corrective actions. • Proactively propose improvements to tool-prep processes, test procedures, and store operations. • Maintain failure, repair, and component-replacement history for critical electronic assemblies and use recurring failure data to support preventive maintenance and reliability improvements. E. Electronics Store & Inventory Management • Own the electronics store: components, spares, consumables, tool accessories, small tools, and tracking/locating equipment (transmitters, AGM units, locators). • Receive, inspect, and verify incoming components and materials against purchase orders and packing lists. • Maintain accurate, current inventory records in the company’s ERP or an equivalent tracking system sized to the store. • Organize, label, and store all inventory in a safe, systematic, and easily auditable manner. • Set and monitor minimum/maximum stock levels sized to WH’s actual tool-prep volume, avoiding both stockouts and excess/obsolete stock. • Conduct periodic physical counts and reconcile discrepancies. • Perform cycle counts at the frequency established by company inventory procedures and reconcile discrepancies promptly. • Maintain serial/lot traceability and shelf-life or expiry controls where applicable, and classify critical spares according to their potential impact on mobilization readiness. • Issue components and consumables against tool-prep and repair jobs. • Identify slow-moving, obsolete, or damaged stock and recommend disposition. F. Procurement & Ordering • Identify component, material, and consumable needs proactively – ahead of tool-prep schedules, not reactively. • Source suppliers and obtain quotations for components, spares, and consumables. • Prepare and submit purchase requisitions in line with PIPECARE procurement policy and approved budget; the position does not have independent purchasing or supplier-approval authority unless formally delegated. • Track order status and coordinate delivery timing against tool-prep and mobilization schedules. • Maintain basic supplier records and flag recurring quality, pricing, or lead-time issues. G. Documentation & Reporting • Enter daily activity into the ERP / Tool Prep Report / Activity Register the same day • Maintain calibration certificates and measurement-traceability records for tools, sensors, reference standards, and test instruments; identify and quarantine equipment that is overdue or out of tolerance and escalate any potential impact on completed work in accordance with the applicable procedure. • Download, verify, and back up tool data promptly after every run • Maintain work areas in a neat, tidy, and HSE-compliant manner H. Other • Execute other reasonable tasks in support of Shop/Workshop priorities as they arise. Skills/Experience • College education in Electronics, or equivalent hands-on/apprenticeship experience • Minimum 3–5 years of relevant work experience; prior exposure to in-line inspection (ILI) tools (Caliper, MFL, UTWM/UTCD, EMAT) is a strong plus. • Solid knowledge of electronic instrumentation and measurement. • Good experience in soldering, calibration, and testing of electronic PCBs and equipment. • Working knowledge of inventory/stock management; experience maintaining stock records or running a parts store is a plus - formal supply-chain credentials are not required at this store’s scale. • Comfortable handling basic procurement/requisitioning tasks: obtaining quotations, raising requisitions, and tracking deliveries. • Proficient in Microsoft Excel; comfortable learning the company’s ERP/inventory-tracking system. • Attention to detail, quality focus. • Ability to work effectively under time pressure and changing mobilization priorities while maintaining quality and safety standards. • Familiarity with pipeline pig tracking/locating equipment (EM/acoustic transmitters, AGM units, handheld locators) is a plus – not required to start, but expected to be picked up quickly. • Self-motivated, creative, critical, and curious – genuinely engaged with the work, not just executing instructions. • Valid driver’s license (local supplier pickups / parts runs). • Ability to handle inspection-tool components within company-defined limits; work in a workshop environment; stand/walk for extended periods; use required PPE; and work safely around machinery, batteries, and electrical/electronic equipment.

Location: Edinburgh, IN, United States Cellular / Radio Frequency Engineer – II About SITE 525 SITE 525 is at the forefront of delivering cutting‑edge training solutions for information maneuver specialists. Our mission is to empower the warfighter with realistic, high‑fidelity training environments that simulate the challenges of modern information warfare. This Cellular/RF Engineer role will support the MACC‑TTE contract and is contingent upon award. The position is located at Camp Atterbury in Edinburgh, IN. Responsibilities Design, deploy, operate, and maintain cellular and radio‑frequency systems supporting MACC‑TTE, including 4G LTE/5G networks, fixed/mobile wireless systems, and associated infrastructure. Perform RF spectrum engineering and management: coordinate frequency requests and licensing, develop spectrum baselines, monitor and deconflict spectrum during testing and training events, and liaise with DoD spectrum managers and the FCC. Integrate RF systems with cyber‑range and OT/ICS environments; ensure compliance with DoD spectrum policies and support Joint Information Operations Range (JIOR) connectivity. Conduct site surveys, signal analysis, coverage mapping, and performance testing; implement security hardening and interference‑mitigation strategies. Provide RF support during live events, troubleshoot issues, and document processes, procedures, and after‑action findings. Required Qualifications Active TS/SCI clearance and ability to maintain it. Bachelor’s degree in electrical engineering, telecommunications, or related field with at least five years of experience in engineering and operating cellular and RF systems (2G/3G/4G/5G). Experience in RF spectrum management and frequency coordination with DoD and FCC entities. Knowledge of RF propagation, antenna theory, and network planning tools; proficiency in integrating RF hardware and software solutions. Meet IAT Level 2 requirements (Security+ CE or equivalent) and familiarity with DoD 8570.01‑M. Prior experience working in a DoD test/training or cyber‑range environment. Preferred Qualifications Experience with virtualization, software‑defined networking, or test instrumentation. Familiarity with Joint Spectrum Center processes, National Guard missions, and 5G experimentation. Advanced certifications (e.g., CCNA Wireless, AWS Advanced Networking).

Location: Toronto; New York Workplace: Hybrid WHO ARE WE? Cohere is the leading security-first enterprise AI company. We build cutting-edge foundation AI models and end-to-end products that are designed to solve real-world business problems. We’re training and deploying frontier models for enterprises who are building AI systems. We believe that our work is instrumental to the widespread adoption of AI and we are looking for folks that want to be part of that. We obsess over what we build. Each one of us is responsible for contributing to increasing the capabilities of our models and the value they drive for our customers. Cohere is a team of researchers, engineers, designers, and more, who are all passionate about their craft. We are a global technology company headquartered in Toronto with key offices in London, New York City, San Francisco, Montreal, Paris, Berlin and Seoul. Join us! Business Need We are overhauling our Salesforce system, which will require significant updates to the data models and pipelines that support revenue reporting. We also lack scalable visibility into self-serve revenue due to fragmented data sources and manual reporting processes. This role will help build and maintain the data infrastructure and automated reporting needed to support these changes and improve visibility across go-to-market and finance teams. Role Description This intern will support Revenue Operations data infrastructure and automation, including data enrichment and management, building and updating data pipelines, and developing automated reporting for go-to-market and finance stakeholders. Key Responsibilities - Support go-to-market reporting, systems, and processes that help teams make data-driven decisions and drive revenue growth. - Help maintain and improve data quality across Salesforce and other go-to-market systems. - Work with cross-functional teams to bring together customer data across product usage, sales activity, marketing engagement, support, and contract data. - Support the development and maintenance of dashboards and reporting for go-to-market and finance leadership. - Assist with data pipelines and processes that connect data across Salesforce, BigQuery, and other systems. - Help identify opportunities to automate manual reporting and operational processes. - Support ad hoc data analysis and operational requests from the Revenue team. What You Bring - Interest in learning about Revenue Operations, data analytics, and how technology companies go to market. - Some experience working with data through coursework, internships, projects, or extracurricular activities. - Comfort with spreadsheets and a willingness to develop skills in tools such as SQL, Salesforce, BigQuery, Looker, or Tableau. - Strong problem-solving ability and an enjoyment of figuring out how data, systems, and processes fit together. - Detail orientation and a commitment to data accuracy and quality. - Comfort with learning new tools and working across multiple projects. - Ability to communicate findings clearly and explain what the data means and why it matters. Position Details Duration: 4 months Start date: January 4 Location: Toronto or New York

Location: Remote - US Founded in 2012, Bugcrowd is the preemptive security platform that unifies exposure discovery and assessment, offensive testing, and intelligence shaped by AI and human insight to help organizations avoid, discover, and validate real-world risk. Bugcrowd helps security teams move faster by identifying the exposures that matter most so they can act first and stay ahead of attackers. By combining the power of humans and AI, teams can preempt attack paths and prevent breaches. Based in San Francisco and New Hampshire, Bugcrowd is supported by General Catalyst, Rally Ventures, Costanoa Ventures, and others. Visit www.bugcrowd.com . Job Summary The Bugcrowd RL and Reasoning Team focuses on pushing the boundaries of autonomous cybersecurity by building authentic, verifiable reinforcement learning environments for world-leading foundational AI companies. As a Reinforcement Learning Engineer specializing in Reinforcement Learning from Verifiable Rewards (RLVR), you will design and scale automated verification pipelines that transform real-world software vulnerabilities into deterministic reward functions. In this role, you will bridge the gap between low-level security analysis and modern LLM reasoning models, engineering environments where AI agents learn to discover, exploit, and remediate software vulnerabilities with mathematical certainty. Instead of relying on subjective human feedback, your work directly powers the rigorous, verifiable reward signals that teach next-generation frontier AI models how to master complex cybersecurity domain logic. You will work at the intersection of fuzzing, dynamic program analysis, system exploitation, and scalable ML infrastructure to shape the safety and offensive/defensive capabilities of future artificial intelligence. Essential Duties and Responsibilities Design, build, and deploy high-throughput RLVR (Reinforcement Learning from Verifiable Rewards) environments that evaluate LLM action sequences against deterministic execution outcomes. Develop automated test harnesses, sandboxes, and verification engines that convert complex vulnerability research (e.g., memory corruption, web security, logic bugs) into binary pass/fail reward signals. Integrate Bugcrowd’s Mayhem automated analysis platform and real-world vulnerability feeds into continuous, scalable RL environment generation pipelines. Architect safe, isolated, and highly reproducible execution environments (using Docker, BuildKit, or Nix) capable of running thousands of simultaneous agent-driven exploitation and patching trajectories. Collaborate directly with researchers at frontier AI labs including Anthropic, OpenAI, and Cohere to define standard benchmark formats, observation spaces, and verifiable evaluation metrics for cybersecurity tasks. Implement precise telemetry, ground-truth verification algorithms, and trajectory logging to analyze agent reasoning paths and prevent reward hacking or false positives. Build low-level instrumentation and debugging tools to monitor memory states, process executions, and network behaviors during agent interaction cycles. Optimize infrastructure performance and environment reset latency to support massive-scale parallel sampling and distributed RL training workflows. Benchmark and evaluate frontier AI model performance across diverse offensive and defensive security challenges, such as automated fuzzing, exploit payload generation, and patch validation. Education, Experience, Knowledge, Skills, and Abilities Understanding of RL training workflows used by modern LLM systems, specifically execution-based feedback or Reinforcement Learning from Verifiable Rewards (RLVR). Proficiency developing applications in Python and low-level systems programming in C, with Rust experience being a strong plus. Solid understanding of software vulnerabilities, binary exploitation, fuzzing methodologies, or program analysis. Experience with DevOps pipelines (e.g., GitHub Actions), reproducible builds (Docker, BuildKit, Nix), and comfort working with Linux systems and low-level debugging. Experience working with or building benchmark environments (e.g., CTFs, SWE-bench, security challenges, or execution sandboxes). Preferred Experience Experience designing custom reward functions, ground-truth verifiers, or automated grading engines for AI safety and reasoning models. Background in low-level program analysis tools, sanitizers (e.g., ASan/MSan), compiler instrumentation, or automated exploit generation tools. Proven track record of participating in or developing competitive cybersecurity benchmarks, CTFs, or open-source AI evaluation frameworks. Working Conditions and Physical Requirements The ideal candidate must be able to complete all physical requirements of the job with or without reasonable accommodation. Sitting and / or standing - Must be able to remain in a stationary position 50% of the time Carrying and / or lifting - Must be able to carry / move laptop as needed throughout the work day. Environment - remote, work-from-home 100% of the time. Pay Range Disclosure At Bugcrowd, we strive for fairness, equality and to create an environment that allows our people to perform at their very best. Our compensation philosophy is to foster a collaborative community that rewards, attracts and retains the best possible talent. The provided salary details are based on US national averages and we retain the flexibility to tailor to the needs of the business. The national estimate for the current base range for the position of $176,400 - $242,550. This position may also be eligible to participate in a discretionary bonus program or commission plan, subject to the rules governing the program, whereby an award, if any, depends on various factors, including, without limitation, individual and organizational performance. Culture At Bugcrowd, we understand that diversity in the workplace is vital to a company’s success and growth. We strive to make sure that people are included and have a sense of being part of making Bugcrowd not only a great product but a great place to work. We regularly hear from both customers and researchers that Bugcrowd feels like a family, and we strive to maintain that internally as well. Our team consists of a broad range of people: musicians, adventure sports junkies, nature lovers, parents, cereal enthusiasts, night owls, cyclists, artists—you get the point. At Bugcrowd, we are solving security threats and vulnerabilities that are relevant to everyone, therefore we believe solving these problems takes all kinds of backgrounds. We value the perspectives and experiences people from underrepresented backgrounds bring. Disclaimer This position has access to highly confidential, sensitive information relating to the technologies of Bugcrowd. It is essential that the applicant possess the requisite integrity to maintain the information in the strictest confidence. The company is authorized to obtain background checks for employment purposes under state and federal law. Background checks will be conducted for positions that involve access to confidential or proprietary information (including trade secrets). Background checks may include Social Security verification, prior employment verification, personal and professional references, educational verification, and criminal history. Applicants with conviction histories will not be excluded from consideration to the extent required by law. Any personal data you submit in connection with your application will be processed in compliance with Bugcrowd's Privacy Policy, which you may review here: https://www.bugcrowd.com/privacy . Equal Employment Opportunity: Bugcrowd is EOE, Disability/Age Employer. Individuals seeking employment at Bugcrowd are considered without regards to race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, gender identity, or sexual orientation. Bugcrowd is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Bugcrowd will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please contact HR at ADA at bugcrowd.com. Apply at: https://www.bugcrowd.com/about/careers/

Location: Espoo Workplace: Hybrid Role highlights: - Senior Smart Manufacturing Engineer, Electronics - Location: Espoo, Finland - Department: Global Manufacturing Organization, Smart Manufacturing Engineering - Reports to: Team Lead, Smart Manufacturing Engineering - Employment type: Permanent - Workplace model: Hybrid - Employment is subject to applicable security screening (incl. SUPO, where required) Why this role matters: As a Senior Smart Manufacturing Engineer, Electronics, you’ll own the test systems that every ICEYE satellite passes through before it reaches orbit. You’ll design and standardize the production and integration test equipment used across our manufacturing sites, find the bottlenecks that would otherwise cap how fast we can scale, and set the technical standard for the engineers around you. This is a hands-on design role with organization-wide influence: what you build and document becomes how we manufacture. Who We Are ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. Your day-to-day responsibilities   - Design, build and own the production and integration test systems used on the line, including the electrical ground support equipment. - Drive standardization of test equipment across products and sites, so designs and interfaces are reused rather than rebuilt each time. - Define test strategies: coverage, test limits, guard bands, failure modes and diagnostics. - Produce and maintain the design documentation other engineers execute from, including schematics, test requirements, procedures and interface definitions. - Use production and test data to find yield issues, bottlenecks and systemic weaknesses, then implement the fixes before they limit the ramp. - Review designs from other teams and set the requirements they must meet to integrate cleanly into our production workflow. - Mentor junior and mid-level engineers through design reviews, feedback and knowledge sharing. What we’re looking for Must haves: - Several years of electronics design and test system development experience, ideally on high-reliability or high-complexity products (space, defence, telecom, automotive, industrial or similar). - Strong analog and digital electronics design, including high-speed digital work (signal integrity, impedance control, power integrity) and PCBA design for manufacturability and testability. - A track record of designing, implementing and maintaining automated test systems or electrical ground support equipment, taken from concept through to stable production. - Hands-on RF and mixed-signal test and characterization, including S-parameters, matching networks and filters, with the instruments that go with them (spectrum analyzers, vector network analyzers, signal generators). - Test automation in Python and embedded development in C/C++ on common microcontrollers such as STM32, TI or MSP430. - Experience mentoring engineers and running design reviews, with documentation quality to match. Nice to haves: - Altium Designer or KiCad, and RF simulation in CST or AWR. - Lean or Six Sigma background, and quality methods such as FMEA, 8D or fault tree analysis applied to production problems. - Experience scaling a manufacturing line: ramp-up, multi-site rollout and continuous improvement. - Real-time operating systems such as FreeRTOS, and serial interfaces including USB, CAN and RS-485. - Confident use of AI tools in day-to-day engineering work. Application Process - Recruiter Interview - Hiring manager interview - Technical assessment - Final Interview WORKING AT ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. HOW WE WORK (OUR VALUES) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. BENEFITS Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Attraction will confirm what applies for this role and location during the process. OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.