Вакансии

Location: Toulouse, France; United States; United Kingdom The company provides full relocation support, including immigration assistance, and offers a relocation bonus upon arrival in Montreal. Selected candidates may work remotely during the initial months while their immigration process is being completed; however, the long-term expectation is for the individual to transition to onsite work in Montreal once relocation has been finalized. Tasks summary: Architecture Concept & Requirements • Establish functional, performance, environmental and security requirements with mission stakeholders & CONOPs. • Translate requirements into clear payload performance parameters and maintain bidirectional traceability throughout the project lifecycle. • Establish with cybersecurity team payload‑specific requirements & embed resilience and security by design. Payload Architecture Definition • Define the overall digital regenerative payload architecture (optical/RF ISLs, antenna arrays, digitizers/ onboard processing, Feeder links, master reference oscillator & clock synchronizations). • Define Interface Control Documents (ICDs) with spacecraft bus, ground segment and payload specific subsystems. • Define high‑speed data‑bus I/F (Serdes, SpaceWire, SpaceFibre, Ethernet, CAN, fiber). Trade‑Study & Technology Road‑Mapping • Lead trade‑offs for technologies, ASIC/FPGAs/SoCs, high‑speed data‑bus, and on‑board processing algorithms, PVT. • Identify emerging technologies and incorporate them into the company’s long‑term roadmap. System Modeling & Performance Simulation • Build end‑to‑end models of the signal chain (optical/RF, analog/digital) using MATLAB/Simulink, SystemView or Python‑based toolkits. • Run Monte‑Carlo and tolerance analyses to verify gain, SNR, dynamic range, spectral efficiency, G/T, EIRP and other key metrics. • Optimize payload design and performance with operation with traffic models/CONOPs. Simulation & Analysis • Oversee performance simulations & analysis (Gain, Spurious, Linearity, SNR, dynamic range, spectral efficiency, pointing, G/T, EIRP…etc.) and tolerance budgeting. • Optimize Payload DC power budget with traffic & utilization models. Hardware & Firmware • Own system‑level specifications to hardware designers, review schematics, layouts, thermal & mechanical interfaces. • Oversee MODCODs selection and on‑board processing pipelines; define BIST, timing, latency and deterministic behavior. Cross‑Functional Coordination, Stakeholder & Program Interaction • Communicate technical status, risk assessments and trade‑study results to senior management and/or customers or partners. • Act as the primary technical liaison with Electrical, Power, Structures, Thermal, Software, Ground Segment and Mission Operations teams to resolve integration issues early. • Support payload design authority in System design reviews and Mission Operations hand‑over. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Author Payload Verification Master Plan covering unit‑test, subsystem‑test, payload‑level test, environmental and electromagnetic compatibility (EMC) test campaigns. • Define test‑automation framework set‑up, test‑case definition, results analysis and test‑report certification. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns. • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to the company’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Ensure all artefacts, analysis, software, deliverables and documentation are version controlled in PLM environment. • Chair design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation. On Orbit & Operations Support • Technical support to Mission Operations for routine payload health monitoring, contingency handling and performance trending. • Lead root‑cause investigations for on‑orbit anomalies; update design baselines and lessons‑learned. • Analyze on‑orbit telemetry, update filter parameters, and generate performance reports. • Define SOOH and associated operator training. Required Qualifications:  B.Sc. in Electrical Engineering, Aerospace or Physics (M.Sc. preferred) with 12 + years of digital regenerative payload system design experience on LEO/MEO missions.  Comprehensive knowledge of digital regenerative communications, SDR, DSP, DVB RCS/SX protocols, Modulation schemes, Class of Service, Networking, MPLS, 2G, 5G, NTN.  Strong technical writing ability (requirements, ICDs, test procedures, risk reports) and presentation skills; comfortable interfacing with customers, suppliers and senior leadership.  Strong understanding of aerospace system engineering fundamentals.  Hands-on individual who can support systems integration processes and capability to test systems and resolve problems.  Experience with Confluence and JIRA.  Demonstrated capability to efficiently work with little supervision.  Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity.  Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Toulouse, France; United States; United Kingdom The company provides full relocation support, including immigration assistance, and offers a relocation bonus upon arrival in Montreal. Selected candidates may work remotely during the initial months while their immigration process is being completed; however, the long-term expectation is for the individual to transition to onsite work in Montreal once relocation has been finalized. Tasks summary: Architecture Concept & Requirements • Gather functional, performance, pointing, environmental and security requirements from mission stakeholders & CONOPs. • Capture, trace and map payload requirements from mission level to subsystem level • Coordinate with cybersecurity team for payload‑specific assessments • Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Payload Architecture & Design • Design the SAR system architecture (antenna arrays & RF front-end Tx/Rx components, digital beamforming, processing chain and digital electronics, power, thermal, and mass). • Lead the conceptual, preliminary, and detailed design phases, producing trade studies, performance budgets). • Produce Interface Control Documents (ICDs) with other subsystems and ground segment. • Provide system‑level specifications to hardware designers, review schematics, layouts, thermal interfaces, and mechanical constraints Simulation & Analysis • Perform performance simulations for tolerance budgeting and image quality. • Support algorithm and analytical development to process SAR. • Define and maintain Payload DC power budget with utilization models. • Perform FMECA, Fault tree and FDIR, reliability modeling and availability to meet mission objectives Cross‑Functional Coordination, Stakeholder & Program Interaction • Communicate technical status, risk assessments and trade‑study results to senior management and/or customers or partners. • Support payload design authority in System design reviews, Power/Structure/Thermal interfaces and Mission Operations assessments. • Liaise with Electrical, Power, Structures, Thermal, Software, Ground‑Segment and Mission‑Operations teams to resolve integration issues early. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Develop Payload Verification Master Plan covering unit‑test, subsystem‑test, payload‑level test, environmental and electromagnetic compatibility (EMC) test campaigns. • Lead test‑automation framework set‑up, test‑case definition, results analysis and test‑report certification. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns. • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to the company’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Ensure all artefacts, analysis, firmware, deliverables and documentation are version controlled in PLM environment. • Lead and Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation. On Orbit & Operations Support • Provide technical support to Mission Operations for routine payload health monitoring, contingency handling and performance trending. • Lead root‑cause investigations for on‑orbit anomalies; update design baselines and lessons‑learned. • Analyze on‑orbit telemetry, update filter parameters, and generate performance reports. • Support SOOH development and associated operator training. Required Qualifications:  B.Sc. in Electrical Engineering, Computer science or Physics with 10 + years of experience supporting SAR remote sensing system development, integration and test on LEO/MEO missions.  Strong technical-writing ability (requirements, ICDs, test procedures, risk reports) and presentation skills; comfortable interfacing with customers, suppliers and senior leadership.  Strong understanding of aerospace system engineering fundamentals.  Hands-on individual who can support systems integration processes and capability to test systems and resolve problems.  Experience with Confluence and JIRA.  Demonstrated capability to efficiently work with little supervision.  Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity.  Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Montreal, Canada The company offers full relocation support , including immigration assistance. Tasks: The Junior FDIR-FSW Engineer will perform and participate in the following tasks and activities, depending on the background and experience of the candidate. · Document the fault detection actions of the platform and payload at the system and subsystem levels. · Work with system, subsystem, payload and unit teams to review FMECAs and provide feedback on the detection, isolation, and recovery of failures modes. · Provide input to the Operations team for Operations Procedures, Operations Manuals, and Satellite test procedures to ensure that the Operations documents and FDIR strategy are aligned. · Review ICDs to provide inputs to the satellite DB team for parameters and monitors. · Review payload, platform, and subsystem design and requirements to ensure that the design is compliant with FDIR requirements. · Review Operations Procedures to ensure that they algin with the FDIR strategy. · Review FDIR test artifacts to determine if the tests are successful. · Verification & Validation Matrices for payload and platform FDIR requirements. · Support the operations team as needed for In-Orbit Test (IOT), anomaly resolution + FDIR. · Support the payload team for definition of payload to platform FDIR. · Support the ICD development activities both HW and SW/DB Must haves · Bachelor’s degree in electrical engineering, computer science or in a relevant field · At least 5 years of relevant practical experience – Can be supplemented with higher degrees relevant to Engineering. · Knowledge of LEO/MEO satellite systems. · Knowledge of satellite systems and subsystems. Complementary skills/knowledge · Previous experience in Constellation FDIR · Creation of Fault Trees and FMECAs · Working knowledge of PUS services · Experience and/or development of payloads · Knowledge of MS Excel, for the purposes of engineering analyses · Strong written and verbal communications skills in English, knowledge of French will be considered favorably

Location: Montreal, Canada The company offers full relocation support , including immigration assistance. Tasks: The Senior FDIR-FSW Engineer will perform and participate in the following tasks and activities, depending on the background and experience of the candidate. · Define the fault detection actions of the platform at the system and subsystem levels. · Define and document how the platform will interfact with the payload for satellite level FDIR. · Work with the operations team to define the contingency scenarios involving FDIR. · Work with customers to use their input for FDIR strategy to refine MDA’s FDIR strategy ensuing that the strategies are compatible. · Work with the FSW team to determine the FDIR test plan on the FlatSat and DSS. · Work with the AI&T team to determine what FDIR needs to be tested at the spacecraft level. · Work with system, subsystems, payload, and units teams to review FMECAs and provide feedback on the detection, isolation, and recovery of failures modes. · Provide input to the Operations team for Operations Procedures, Operations Manuals, and Satellite test procedures to ensure that the Operations documents and FDIR strategy are aligned. · Review ICDs to provide inputs to the satellite DB team for parameters and monitors. · Review payload, platform, and subsystem design; including block diagrams, ICDs, ConOps, and requirement to ensure that the design is compliant with FDIR requirements. · Review Operations Procedures to ensure that they algin with the FDIR strategy. · Review FDIR test artifacts to determine if the tests are successful and if they are not, work with the team to troubleshoot how to resolve non compliances. · Verification & Validation Matrices for platform and payload FDIR requirements. · Support the payload team in their definition of payload FDIR and how it impacts the satellite level FDIR. · Support the operations team as needed for In-Orbit Test (IOT), anomaly resolution + FDIR. · Support the ICD development activities both HW and SW/DB Must haves · Bachelor’s degree in electrical engineering, computer science or in a relevant field · At least 10 years of relevant practical experience – Can be supplemented with higher degrees relevant to Engineering. · Previous experience with LEO/MEO satellite systems. · Strong cross-functional team collaboration. · Experience with analysis of satellite systems and subsystems. · Familiarity and/or experience with FMECAs and/or Fault Tree Analysis. · An understanding of how failures can propagate through a system. · Ability to decompose system level failures down to the unit level and back up from the unit to the system level. · Knowledge of satellite FSW and how monitors work for FDIR. · Knowledge of how to test HW and SW for FDIR. Complementary skills/knowledge · Previous experience in Constellation FDIR · Creation of Fault Trees and FMECAs · Experience with reliability analysis · Working knowledge of PUS services · Experience with mentoring junior engineers · Experience with FDIR on embedded systems · Experience with payload FDIR. · Knowledge of MS Excel, for the purposes of engineering analyses · Knowledge of requirements Management tools such as DOORS/Windchill/Jama · Demonstrated capability to efficiently work with little to no supervision · Strong written and verbal communications skills in English, knowledge of French will be considered favorably

Location: Montreal, Canada The company provides full relocation support, including immigration assistance, and offers a relocation bonus upon arrival in Montreal. Selected candidates may work remotely during the initial months while their immigration process is being completed; however, the long-term expectation is for the individual to transition to onsite work in Montreal once relocation has been finalized. Tasks summary: Architecture Concept & Requirements • Establish functional, performance, environmental and security requirements with mission stakeholders & CONOPs. • Translate requirements into clear payload performance parameters and maintain bidirectional traceability throughout the project lifecycle. • Establish with cybersecurity team payload‑specific requirements & embed resilience and security by design. Payload Architecture Definition • Define the overall digital regenerative payload architecture (optical/RF ISLs, antenna arrays, digitizers/ onboard processing, Feeder links, master reference oscillator & clock synchronizations). • Define Interface Control Documents (ICDs) with spacecraft bus, ground segment and payload specific subsystems. • Define high‑speed data‑bus I/F (Serdes, SpaceWire, SpaceFibre, Ethernet, CAN, fiber). Trade‑Study & Technology Road‑Mapping • Lead trade‑offs for technologies, ASIC/FPGAs/SoCs, high‑speed data‑bus, and on‑board processing algorithms, PVT. • Identify emerging technologies and incorporate them into the company’s long‑term roadmap. System Modeling & Performance Simulation • Build end‑to‑end models of the signal chain (optical/RF, analog/digital) using MATLAB/Simulink, SystemView or Python‑based toolkits. • Run Monte‑Carlo and tolerance analyses to verify gain, SNR, dynamic range, spectral efficiency, G/T, EIRP and other key metrics. • Optimize payload design and performance with operation with traffic models/CONOPs. Simulation & Analysis • Oversee performance simulations & analysis (Gain, Spurious, Linearity, SNR, dynamic range, spectral efficiency, pointing, G/T, EIRP…etc.) and tolerance budgeting. • Optimize Payload DC power budget with traffic & utilization models. Hardware & Firmware • Own system‑level specifications to hardware designers, review schematics, layouts, thermal & mechanical interfaces. • Oversee MODCODs selection and on‑board processing pipelines; define BIST, timing, latency and deterministic behavior. Cross‑Functional Coordination, Stakeholder & Program Interaction • Communicate technical status, risk assessments and trade‑study results to senior management and/or customers or partners. • Act as the primary technical liaison with Electrical, Power, Structures, Thermal, Software, Ground Segment and Mission Operations teams to resolve integration issues early. • Support payload design authority in System design reviews and Mission Operations hand‑over. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Author Payload Verification Master Plan covering unit‑test, subsystem‑test, payload‑level test, environmental and electromagnetic compatibility (EMC) test campaigns. • Define test‑automation framework set‑up, test‑case definition, results analysis and test‑report certification. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns. • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to the company’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Ensure all artefacts, analysis, software, deliverables and documentation are version controlled in PLM environment. • Chair design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation. On Orbit & Operations Support • Technical support to Mission Operations for routine payload health monitoring, contingency handling and performance trending. • Lead root‑cause investigations for on‑orbit anomalies; update design baselines and lessons‑learned. • Analyze on‑orbit telemetry, update filter parameters, and generate performance reports. • Define SOOH and associated operator training. Required Qualifications:  B.Sc. in Electrical Engineering, Aerospace or Physics (M.Sc. preferred) with 12 + years of digital regenerative payload system design experience on LEO/MEO missions.  Comprehensive knowledge of digital regenerative communications, SDR, DSP, DVB RCS/SX protocols, Modulation schemes, Class of Service, Networking, MPLS, 2G, 5G, NTN.  Strong technical writing ability (requirements, ICDs, test procedures, risk reports) and presentation skills; comfortable interfacing with customers, suppliers and senior leadership.  Strong understanding of aerospace system engineering fundamentals.  Hands-on individual who can support systems integration processes and capability to test systems and resolve problems.  Experience with Confluence and JIRA.  Demonstrated capability to efficiently work with little supervision.  Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity.  Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Montreal, Canada The company provides full relocation support, including immigration assistance, and offers a relocation bonus upon arrival in Montreal. Selected candidates may work remotely during the initial months while their immigration process is being completed; however, the long-term expectation is for the individual to transition to onsite work in Montreal once relocation has been finalized. Tasks summary: Architecture Concept & Requirements • Gather functional, performance, environmental and security requirements from mission stakeholders & CONOPs. • Map requirements to payload equipment performance with I/F with on-board processor • Coordinate with cybersecurity team for payload‑specific assessments • Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Payload Architecture & Design • Implement the high‑level digital payload architecture (optical ISLs, Phased array antennas, Feeder links & front‑end), master reference oscillator & clock synchronizations. • Produce Interface Control Documents (ICDs) with other subsystems and ground segment. • Implement high‑speed data‑bus I/F (SpaceWire, SpaceFibre, Ethernet, CAN). Simulation & Analysis • Perform performance simulations (Gain, Spurious, Linearity, SNR, dynamic range, spectral efficiency, G/T, EIRP…etc.) and Monte‑Carlo analyses for tolerance budgeting. • Define and maintain Payload DC power budget with traffic & utilization models • Perform FMECA, Fault tree and FDIR, reliability modeling and availability to meet mission objectives Hardware & Firmware • Provide system‑level specifications to hardware designers, review schematics, layouts, thermal interfaces, and mechanical constraints. • Support SW development for MODCODs and on‑board processing pipelines; ensure BIST, timing, latency and deterministic behavior. Cross‑Functional Coordination, Stakeholder & Program Interaction • Communicate technical status, risk assessments and trade‑study results to senior management and/or customers or partners. • Support payload design authority in System design reviews, Power/Structure/Thermal interfaces and Mission Operations assessments. • Liaise with Electrical, Power, Structures, Thermal, Software, Ground‑Segment and Mission‑Operations teams to resolve integration issues early. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Develop Payload Verification Master Plan covering unit‑test, subsystem‑test, payload‑level test, environmental and electromagnetic compatibility (EMC) test campaigns. • Lead test‑automation framework set‑up, test‑case definition, results analysis and test‑report certification. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns. • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to the company’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Ensure all artefacts, analysis, software, deliverables and documentation are version controlled in PLM environment. • Lead and Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation. On Orbit & Operations Support • Provide technical support to Mission Operations for routine payload health monitoring, contingency handling and performance trending. • Lead root‑cause investigations for on‑orbit anomalies; update design baselines and lessons‑learned. • Analyze on‑orbit telemetry, update filter parameters, and generate performance reports. • Support SOOH development and associated operator training. Required Qualifications:  B.Sc. in Electrical Engineering, Aerospace or Physics with 8 + years of digital regenerative payload system design experience on LEO/MEO missions.  Comprehensive knowledge of digital communications, SDR, DSP, DVB RCS/SX protocols, Modulation schemes, Class of Service, Networking, MPLS, 2G, 5G NTN.  Strong technical-writing ability (requirements, ICDs, test procedures, risk reports) and presentation skills; comfortable interfacing with customers, suppliers and senior leadership.  Strong understanding of aerospace system engineering fundamentals.  Hands-on individual who can support systems integration processes and capability to test systems and resolve problems.  Experience with Confluence and JIRA.  Demonstrated capability to efficiently work with little supervision.  Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity.  Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Montreal, Canada The company provides full relocation support, including immigration assistance, and offers a relocation bonus upon arrival in Montreal. Selected candidates may work remotely during the initial months while their immigration process is being completed; however, the long-term expectation is for the individual to transition to onsite work in Montreal once relocation has been finalized. Tasks summary: Architecture Concept & Requirements • Gather functional, performance, pointing, environmental and security requirements from mission stakeholders & CONOPs. • Capture, trace and map payload requirements from mission level to subsystem level • Coordinate with cybersecurity team for payload‑specific assessments • Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Payload Architecture & Design • Design the SAR system architecture (antenna arrays & RF front-end Tx/Rx components, digital beamforming, processing chain and digital electronics, power, thermal, and mass). • Lead the conceptual, preliminary, and detailed design phases, producing trade studies, performance budgets). • Produce Interface Control Documents (ICDs) with other subsystems and ground segment. • Provide system‑level specifications to hardware designers, review schematics, layouts, thermal interfaces, and mechanical constraints Simulation & Analysis • Perform performance simulations for tolerance budgeting and image quality. • Support algorithm and analytical development to process SAR. • Define and maintain Payload DC power budget with utilization models. • Perform FMECA, Fault tree and FDIR, reliability modeling and availability to meet mission objectives Cross‑Functional Coordination, Stakeholder & Program Interaction • Communicate technical status, risk assessments and trade‑study results to senior management and/or customers or partners. • Support payload design authority in System design reviews, Power/Structure/Thermal interfaces and Mission Operations assessments. • Liaise with Electrical, Power, Structures, Thermal, Software, Ground‑Segment and Mission‑Operations teams to resolve integration issues early. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Develop Payload Verification Master Plan covering unit‑test, subsystem‑test, payload‑level test, environmental and electromagnetic compatibility (EMC) test campaigns. • Lead test‑automation framework set‑up, test‑case definition, results analysis and test‑report certification. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns. • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to the company’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Ensure all artefacts, analysis, firmware, deliverables and documentation are version controlled in PLM environment. • Lead and Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation. On Orbit & Operations Support • Provide technical support to Mission Operations for routine payload health monitoring, contingency handling and performance trending. • Lead root‑cause investigations for on‑orbit anomalies; update design baselines and lessons‑learned. • Analyze on‑orbit telemetry, update filter parameters, and generate performance reports. • Support SOOH development and associated operator training. Required Qualifications:  B.Sc. in Electrical Engineering, Computer science or Physics with 10 + years of experience supporting SAR remote sensing system development, integration and test on LEO/MEO missions.  Strong technical-writing ability (requirements, ICDs, test procedures, risk reports) and presentation skills; comfortable interfacing with customers, suppliers and senior leadership.  Strong understanding of aerospace system engineering fundamentals.  Hands-on individual who can support systems integration processes and capability to test systems and resolve problems.  Experience with Confluence and JIRA.  Demonstrated capability to efficiently work with little supervision.  Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity.  Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Warsaw, Poland; Madrid, Spain; Tbilisi, Georgia; Yerevan, Armenia; Bratislava, Slovakia; Podgorica, Montenegro CloudLinux is transforming the Linux infrastructure market by ensuring security and stability for over 500,000 servers worldwide. Our products - CloudLinux OS and Imunify360 - are the de facto standard in the hosting industry and Enterprise segment. We are seeking a visionary engineer to lead the evolution of our data platform. In 2025, we are shifting from classic database administration to an Internal Database-as-a-Service (DBaaS) model. We need a specialist who doesn’t just "configure backups," but designs resilient distributed systems, writes code to automate infrastructure, and transforms databases into a reliable service for product teams. If you are tired of endless tickets and want to build platforms capable of processing petabytes of data, this role is for you. Your Challenges & Responsibilities: DBaaS Architecture: Design and implement a self-service platform based on Terraform and Ansible , enabling the deployment of HA clusters (PostgreSQL and ClickHouse, MongoDB, Redis) in a heterogeneous environment (Bare Metal + OpenNebula + Kubernetes + Public Clouds). You will turn infrastructure into a product. Scaling ClickHouse: Manage exponentially growing analytics clusters (12+ clusters, tens of terabytes of data). You will tackle sharding, table engine optimization (ReplicatedMergeTree), and building reliable S3 backup pipelines under high load. Data Platform & Analytics Support: Maintain and scale the infrastructure for Apache Airflow and Redash. You will ensure the reliability of ETL pipelines and visualization tools, bridging the gap between raw infrastructure and the data analytics team. Reliability as Code: Implement SRE practices in data management. Replace manual incident response with automated self-healing mechanisms. Define and implement SLO/SLI for all databases. Stack Modernization: Lead the migration process from legacy solutions to modern cloud patterns. Participate in decision-making regarding the implementation of Kubernetes operators for stateful workloads. Expertise & Mentorship: Serve as the technical authority for product teams, helping them optimize data schemas and SQL queries for high-load systems. Our Tech Stack: Databases : PostgreSQL 15+ (Patroni, PgBouncer), ClickHouse (Sharded/Replicated), MongoDB, Redis, Kafka Data & Analytics: Apache Airflow, Redash (Infrastructure & Integration). Infrastructure: Own 3+DC colocation (OpenNebula, Kubernetes, Bare Metal), AWS, Google Cloud, Azure, DO – Hybrid Cloud. Automation & IaC: Terraform, Ansible, Python/Go, GitLab, Jenkins, Gerrit. Observability : VictoriaMetrics, Grafana, Loki. Why CloudLinux? Culture: A Remote-first company with an "Employees First" principle. We value results, not hours in the office. Impact: Your architectural decisions will determine the stability of services used by thousands of companies around the world. Growth: We support professional development and pay for training and conferences. Requirements What We Expect From You: AI-Augmented Engineering: You don't view AI as a replacement for deep technical fundamentals, but as a high-leverage tool. We actively use AI agents (Claude, Codex, Gemini, etc.) to automate boilerplate, analyze complex logs, and speed up research. We expect you to be open to modern workflows and integrate AI into your day-to-day operations, allowing you to focus your brainpower on the true architectural challenges. Deep PostgreSQL Expertise (5+ years): You know MVCC internals, understand locking mechanics, can configure Patroni and PgBouncer "with your eyes closed," and have experience with seamless major version upgrades under load. ClickHouse Mastery: Experience operating large clusters, understanding ZooKeeper/ClickHouse Keeper, sharding, replication internals, and the ability to diagnose performance issues at the data-part level. Engineering Mindset (SRE/DevOps): You hate doing the same task twice by hand. Experience writing complex Terraform modules and Ansible roles is mandatory. Programming skills in Python or Go for automation are a huge plus. Hybrid Environment Experience: You understand the differences between running DBs on Bare Metal vs. Kubernetes vs. Cloud and know how to optimize TCO and disk subsystem performance (NVMe, Network Storage). Systems Approach: You see the big picture - from the network packet to the application business logic. You understand the importance of security (FIPS, Audit logs) and Disaster Recovery. English: upper-intermediate or higher - to ensure clear communication of progress within the teams Nice to Have: Experience building an Internal Developer Platform (IDP). Experience operating databases in Kubernetes (CloudNativePG, Altinity Operator). Experience working in Cloud and Hosting providers on similar services. Benefits What's in it for you? A focus on professional development. Interesting and challenging projects. Fully remote work with flexible working hours, which allows you to schedule your day and work from any location worldwide. Paid 24 days of vacation per year, 10 days of national holidays, and unlimited sick leaves. Compensation for private medical insurance. Co-working and gym/sports reimbursement. Budget for education. The opportunity to receive a reward for the most innovative idea that the company can patent. By applying for this position, you consent to the processing of your personal data as described in our Privacy Policy ( https://cloudlinux.com/candidate-privacy-notice ), which provides detailed information on how we maintain and handle your data.

Location: US, Boston, MA Workplace: OnSite Here at Humanoid, we believe in a future where robots amplify human potential. That’s why we’ve set out on a mission to build the world’s most capable, commercially-scalable, and safe humanoid robots. We’re bringing that mission to life with HMND‑01 - our rapidly developed humanoid platform being deployed in real industrial environments - and we’re growing the team to take it even further. ABOUT THE ROLE As a Senior Platform Software Engineer at Humanoid, you will be at the heart of developing the core OS, data networks and protocols, and fundamental software subsystems for our next-generation humanoid robots. You will help develop the foundational software architectures that allow high fidelity robotic controls and AI development. You will be responsible for writing high-integrity software that runs on our robots, integrating sensors, safety systems, and computing platforms to enable safe human-robot collaboration. In this role, you will have the opportunity to take full ownership of new systems and directly contribute to the development of our future products. If you are interested in complex embedded software projects, thrive in a fast-paced, collaborative environment, and want to make a real impact on the future of human-robot interaction, we want you on our team! WHAT YOU’LL DO - Design & Create Embedded Software: Develop and validate embedded software that ensures our robots can operate at scale in the real world. - Hardware & Software Integration: Work at the intersection of hardware and software to integrate various robotic components (e.g., sensors, actuators, computing platforms) into a cohesive, fault-tolerant system. - Lead Cross-Functional Projects: Lead interdisciplinary projects that involve robotic perception, computing subsystems, and software integration, collaborating with engineers across multiple domains. - Test & Evaluate Systems: Integrate new systems with our robots to test, validate, and ensure that they meet safety requirements and perform reliably in real-world conditions. - Build Infrastructure for Innovation: Contribute to the development of tools, infrastructure, and operational practices within a small, agile R&D team focused on unlocking new capabilities for Humanoid robots. - Drive Safety in Robotics: Be part of a team working at the cutting edge of technology to improve the safety and performance of robots operating in real-world, human-centric environments. - Collaborate Across Teams: Work closely with electrical engineers, software developers, robotics control experts, physical AI developers, and other team members to integrate software systems with robotics hardware, ensuring seamless operation and performance.   WHAT WE'RE LOOKING FOR - 5+ years of experience developing and deploying production software in embedded systems running Linux (C++, C, Rust, Python, Go). - Experience developing time-sensitive, performance-critical applications. - Thorough understanding of Ethernet and IP networking and higher-level protocols like HTTP or gRPC. - Experience with Linux build environments like Yocto or Buildroot. - Experience in building Linux kernels and modifying or writing device drivers. - Experience with NVIDIA’s Jetson platform is a plus. - Experience working with sensor data, including cameras, lidars, radars, and IMUs is a plus. - Strong communication skills, with the ability to write clear technical documentation and deliver presentations on complex topics. - Proven history of leading cross-functional technical projects, including developing technical requirements and driving collaboration across teams. - Experience working in small, agile teams with fast iteration cycles and interdisciplinary collaboration. WHAT WE OFFER - Comprehensive health coverage for US‑based employees, including fully paid medical, dental, and vision insurance, with virtual care and employee assistance resources. - Meaningful time off to rest and recharge: 23 days of PTO (accrued), separate sick leave, and paid company holidays. - 401(k) retirement plan with employer match. - Equity included–we believe builders should share in what they build. - Free daily catered lunch, snacks, and drinks in‑office. - Collaboration with top‑tier engineers, researchers, and product experts in AI and robotics. - Freedom to influence the product and own key initiatives. For this role in Massachusetts, the expected base salary range is $180K–$250K USD per year; your placement in that range depends on how your experience maps to our internal leveling.

Location: Espoo Workplace: Hybrid - Title: Structural Analysis Engineer, Team Lead - Location: Espoo, Finland - Department: Spacecraft Hardware - Reports to: Mechanical Team Lead - Employment type: Permanent - Workplace model: On-site / Hybrid - Employment is subject to applicable security screening (incl. SUPO) WHY THIS ROLE MATTERS: As a Senior Structural Engineer, you’ll lead structural analysis and engineering efforts to ensure ICEYE’s satellites meet demanding aerospace requirements for structural integrity, reliability, and manufacturability, enabling mission success from launch through on-orbit operations. WHO WE ARE ICEYE delivers space-based intelligence, surveillance, and reconnaissance (ISR) capabilities to governments and allied nations. This includes sovereign and turnkey ISR missions leveraging ICEYE’s world-leading synthetic aperture radar (SAR) satellite technology, as well as access to data from the world’s largest SAR satellite constellation. These capabilities enable partners to detect and respond to critical changes anywhere on Earth with unprecedented speed and accuracy, day or night and in any weather, supported by ultra high-resolution imagery and high-frequency revisits. As a trusted partner for defense, intelligence, security, and maritime domain awareness, ICEYE’s near real-time data creates a tactical advantage for mission-critical operations. Designed for dual use, the platform also serves civil protection and commercial users for natural-catastrophe intelligence, insurance, maritime monitoring including oil-spill detection, and finance, contributing to global security and community resilience. ICEYE is headquartered in Finland and operates globally across Europe, North America, the Middle East, and Asia-Pacific. We have more than 900 employees, united by a shared vision: improving life on Earth by becoming the global source of truth in Earth Observation. YOUR DAY-TO-DAY RESPONSIBILITIES - Lead, manage, and mentor the Structural Analysis team - Define structural requirements from mission and launcher constraints down to system and subsystem levels - Lead and contribute to trade studies, design reviews, and verification and qualification documentation - Ensure smooth and timely product delivery from concept through qualification - Drive continuous improvement of structural design and analysis methods - Collaborate with hardware engineering, AIT, and quality teams to ensure compliance with launch and in-orbit environments - Work with system and subsystem engineers to define requirements for new products - Support integration, validation, and issue resolution across internal and external teams WHAT ARE WE LOOKING FOR MUST HAVES: - Master’s degree in Structural Engineering, Aerospace Engineering, or related field - Experience leading and managing structural analysis or engineering teams - Experience designing satellite structures, subsystems, or complex electromechanical systems - Deep understanding of mechanical stress, vibration, and thermal effects on space structures - Strong expertise in finite element analysis, including structural dynamics and failure analysis - Experience with mechanical, hybrid, and bonded joints for load-carrying composite structures - Familiarity with aerospace standards such as ECSS, NASA, or MIL - Ability to collaborate cross-functionally with systems, electrical, and manufacturing teams NICE TO HAVES: - Experience with PLM or PDM systems for configuration control - Hands-on experience with mechanical assembly, integration, and testing - Experience with launch vehicle or spacecraft environments APPLICATION PROCESS - Recruiter screening - Hiring manager interview - Technical task - Technical panel interview - Final interview WORKING AT ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. HOW WE WORK (OUR VALUES) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the why behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. BENEFITS Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us and we will do our best to help. Apply now to start your ICEYE journey and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Espoo Workplace: Hybrid - Title: Senior RF Engineer, Radar Payload Team - Location: Espoo, Finland - Department: Spacecraft Hardware - Reports to: Radar Payload Team Lead - Employment type: Permanent - Workplace model: Hybrid - Employment is subject to applicable security screening (incl. SUPO) WHY THIS ROLE MATTERS: As a Senior RF Engineer, you’ll own end-to-end RF hardware development for ICEYE’s radar payloads, enabling high-performance SAR capabilities that deliver actionable intelligence from space in near real time. WHO WE ARE ICEYE delivers space-based intelligence, surveillance, and reconnaissance (ISR) capabilities to governments and allied nations. This includes sovereign and turnkey ISR missions leveraging ICEYE’s world-leading synthetic aperture radar (SAR) satellite technology, as well as access to data from the world’s largest SAR satellite constellation. These capabilities enable partners to detect and respond to critical changes anywhere on Earth with unprecedented speed and accuracy, day or night and in any weather, supported by ultra high-resolution imagery and high-frequency revisits. As a trusted partner for defense, intelligence, security, and maritime domain awareness, ICEYE’s near real-time data creates a tactical advantage for mission-critical operations. Designed for dual use, the platform also serves civil protection and commercial users for natural-catastrophe intelligence, insurance, maritime monitoring including oil-spill detection, and finance, contributing to global security and community resilience. ICEYE is headquartered in Finland and operates globally across Europe, North America, the Middle East, and Asia-Pacific. We have more than 900 employees, united by a shared vision: improving life on Earth by becoming the global source of truth in Earth Observation. YOUR DAY-TO-DAY RESPONSIBILITIES - Own RF subsystems across the radar chain, including Tx/Rx, front-end, frequency conversion, LO and filtering stages, and interfaces to digital - Translate mission needs into RF requirements, architecture trades, and implementable hardware designs - Design, simulate, and validate RF circuits for X-band and above, ensuring performance aligns with system targets - Execute hands-on lab work, including bring-up, debugging, root-cause analysis, and RF performance tuning - Run EM and circuit simulations and correlate results with measurements to de-risk designs - Create and review schematics and PCB layouts with RF-critical considerations such as impedance control, grounding, and isolation - Define and execute verification strategies, including test plans, validation, and acceptance criteria - Drive technical decisions, mentor engineers, and collaborate cross-functionally to deliver flight-ready hardware WHAT WE’RE LOOKING FOR MUST HAVES: - 10+ years of experience delivering RF hardware products end-to-end, including shipped or qualified systems - Strong hands-on RF lab expertise with measurement, debugging, and correlation using standard RF test equipment - Proven experience with RF simulation tools such as ADS and 3D EM tools such as HFSS or CST - Solid PCB design experience with RF layout best practices, using tools such as Altium - Deep understanding of RF fundamentals including linearity, noise figure, phase noise, spurs, filtering, and stability - Experience owning RF subsystems across the full lifecycle from requirements through production support - Ability to lead technically, make trade-offs, and communicate clearly across disciplines - Working knowledge of Python for analysis, automation, or tooling NICE TO HAVES: - Experience with radar payloads, spaceborne RF systems, or aerospace or defense hardware - Familiarity with ECSS, MIL-STD, or similar qualification and environmental testing standards - Experience with antenna systems, RF packaging, or high-power and low-noise RF design APPLICATION PROCESS - Recruiter screening - Hiring manager interview - Technical task - Technical panel interview - Final interview WORKING AT ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. HOW WE WORK (OUR VALUES) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the why behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. BENEFITS Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us and we will do our best to help. Apply now to start your ICEYE journey and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Espoo Workplace: Hybrid - Title: Electronics Engineer, Radar Payload Team - Location: Espoo, Finland - Department: Spacecraft Hardware - Reports to: Radar Payload Team Lead - Employment type: Permanent - Workplace model: Hybrid - Employment is subject to applicable security screening (incl. SUPO) WHY THIS ROLE MATTERS: As an Electronics Engineer, you’ll design and deliver critical electronic subsystems that enable ICEYE’s radar payloads to operate reliably in space and produce high-quality Earth observation data. WHO WE ARE ICEYE delivers space-based intelligence, surveillance, and reconnaissance (ISR) capabilities to governments and allied nations. This includes sovereign and turnkey ISR missions leveraging ICEYE’s world-leading synthetic aperture radar (SAR) satellite technology, as well as access to data from the world’s largest SAR satellite constellation. These capabilities enable partners to detect and respond to critical changes anywhere on Earth with unprecedented speed and accuracy, day or night and in any weather, supported by ultra high-resolution imagery and high-frequency revisits. As a trusted partner for defense, intelligence, security, and maritime domain awareness, ICEYE’s near real-time data creates a tactical advantage for mission-critical operations. Designed for dual use, the platform also serves civil protection and commercial users for natural-catastrophe intelligence, insurance, maritime monitoring including oil-spill detection, and finance, contributing to global security and community resilience. ICEYE is headquartered in Finland and operates globally across Europe, North America, the Middle East, and Asia-Pacific. We have more than 900 employees, united by a shared vision: improving life on Earth by becoming the global source of truth in Earth Observation. YOUR DAY-TO-DAY RESPONSIBILITIES - Design board-level electronic systems for satellite radar units and RF boards, focusing on power and control circuits - Develop microcontroller-based solutions for power management and control - Test and validate electronic designs to ensure functionality, performance, and compliance with requirements - Document schematics, PCB layouts, and test procedures throughout development - Collaborate with RF, mechanical, and software teams to deliver integrated payload systems - Support troubleshooting and iteration during development and testing phases - Contribute to improving reliability and performance of electronic subsystems in demanding environments WHAT WE’RE LOOKING FOR MUST HAVES: - 4+ years of experience in electronics engineering with a focus on practical product development - Strong experience in analog electronics design - Experience with PCB design tools such as Altium - Experience designing power control circuits, including for high-power RF amplifiers and low-noise supplies - Solid understanding of high-speed signal design fundamentals - Hands-on experience with testing and validation of electronic systems - Ability to collaborate effectively across engineering disciplines NICE TO HAVES: - Knowledge of EMI and EMC principles and best practices - Experience in aerospace, satellite, or defense-related hardware development - Fundamental understanding of RF systems and integration APPLICATION PROCESS - Recruiter screening - Hiring manager interview - Technical task - Technical panel interview - Final interview WORKING AT ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. HOW WE WORK (OUR VALUES) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the why behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. BENEFITS Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us and we will do our best to help. Apply now to start your ICEYE journey and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Lviv; Kyiv Workplace: onsite Ajax Systems, an international tech company and the largest manufacturer of security systems in Europe. We are looking for a new team member to join our System devisions as a Junior Embedded Engineer.  The System Division develops the Ajax software ecosystem — including OS Malevich, the Video Management System, cloud infrastructure, and client applications. The team ensures the stable operation of all system components as a unified digital platform. Required skills: - Excellent knowledge of embedded coding techniques, interfaces (e.g. SPI, I2C, UART, CAN, RS485) and subsystems - Strong skills in various build systems. - Excellent knowledge of C programming language - Understanding of operating systems: embedded developers usually need experience in programming in embedded Linux or similar embedded operating systems - Good hands-on experience of software engineering fundamentals such as testing, continuous integration, continuous deployment, pull requests and code reviews, source control, work item/issue tracking. Would be a plus: - Experience with MCU's, e.g STM, ESP, AVR, NRf etc - Scripting languages Python, Bash - Basic electronics: embedded engineers use oscilloscopes, logic analysers, and multimeters for debugging Responsibility zone: - Participate in the full embedded software life cycle: design, implementation, code reviews, documentation, testing and validation - Analysis and systematic problem solving for SW reported issues - Cooperate with electrical engineers to perform verification of new hardware from software team perspective. Review and provide feedback on the firmware specific aspects of hardware design - Delivery highly reliable Malevich OS releases - Work with high-level and technical requirements for research and development new features - Create unit and functional tests With us you will enjoy: - Working with a team of people to build the future of an industry. - Gain commercial experience with on-site support from  experienced team members - Non-trivial challenges and various specter of interesting tasks. - A flexible, friendly and collaborative work environment. - Corporate culture based on common sense. Ajax Systems is a Ukrainian success story that has grown into a global product. Ajax devices are trusted by more than 4.5 million end users and 330,000 PRO users in over 180 countries. The company provides comprehensive solutions to protect residential and commercial properties of all sizes. Today, Ajax portfolio includes 280 devices for intrusion protection, video surveillance, fire safety, and comfort and automation.

Location: San Francisco; Toronto; New York; Montreal; Seattle Workplace: Hybrid ABOUT BASETEN Baseten powers mission-critical inference for the world's most dynamic AI companies, like Cursor, Notion, OpenEvidence, Abridge, Clay, Gamma, and Writer. By uniting applied AI research, flexible infrastructure, and seamless developer tooling, we enable companies operating at the frontier of AI to bring cutting-edge models into production. We're growing quickly and recently raised our $1.5B Series F https://www.baseten.co/blog/announcing-our-series-f/, led by Altimeter Capital, Conviction Partners, and Spark Capital. Join us and help build the platform engineers turn to ship AI products. THE ROLE We are looking for Software Engineers to join our team. This is a specialized, high-impact role sitting at the intersection of high-performance computing (HPC) and Large Language Model (LLM) engineering. You will not just be building the automated "speedometer and diagnostic" suite for our next-generation AI infrastructure; you will be defining the roadmap, driving key technical decisions, and taking full ownership of the future of this work. RESPONSIBILITIES - Benchmarking: Evaluate, run and automate standard LLM quality benchmarks (GSM8K, MMLU) alongside custom performance suites for specific workloads (e.g., long-context window, KV cache reuse, disaggregated serving). - DevEx Improvement: Develop and maintain internal GPU-enabled development environments (similar to GitHub Codespaces). You will ensure the team has seamless, high-performance "dev machines" optimized for model experimentation. - Tool Development: Build and contribute to open-source tools such as InferenceMAX and genai-bench to automate model evaluation, benchmarking and analysis. - System Profiling: Use profilers like PyTorch Profiler, NVIDIA Nsight Systems and py-spy to collect performance profiles, identify bottlenecks, and debug the compute/networking stack. - Monitoring & Observability: Develop real-time dashboards and alerts to monitor system health, model startup times, and runtime performance. - Continuous Integration: Automate performance testing via CI/CD pipelines to catch regressions and build release workflow automation for the model runtimes stack. - Optimization Automation: Build tools to find the "Pareto frontier"—identifying the absolute best configuration (latency vs. cost vs. quality) for a given model and workload. REQUIREMENTS This is a mid-senior, high leverage role. We care about your technical depth, strong communication skills to drive cross-team efforts, ability to navigate vague requirements and mentor other engineers. We want to talk to you if you have: - A Love for Systems & Hardware: You aren’t just interested in the AI; you want to understand GPU memory subsystems, InfiniBand, and how data moves across a cluster. - An Automation Mindset: You believe that if a task has to be done twice, it should be scripted. You have a passion for stress-testing and fuzzy testing to find the "breaking point" of a system. - Mathematical Curiosity: A desire to understand the underlying math of Transformers and how it translates into FLOPs and memory requirements. - Technical Toolkit: Familiarity with Python, and an eagerness to master the NVIDIA software stack. C++ familiarity is good to have. WHY THIS ROLE - Direct Impact: Your tools will be the gatekeeper for what defines "good" performance for our customers. - Deep Learning (Literally): You will gain world-class expertise in GPU orchestration and LLM inference that few engineers in the industry possess. - High Ownership: As the lead of a small team, you will have the autonomy to build tools from scratch and contribute to open-source projects. BENEFITS - Competitive compensation, including meaningful equity - (U.S. only) 100% coverage of medical, dental, and vision insurance for employee and dependents - Flexible PTO policy including company wide Winter Break (our offices are closed from Christmas Eve to New Year's Day!) - Paid parental leave - Fertility and family-building stipend through Carrot - (U.S. only) Company-facilitated 401(k) - Exposure to a variety of ML startups, offering unparalleled learning and networking opportunities. Apply now to embark on a rewarding journey in shaping the future of AI! If you are a motivated individual with a passion for machine learning and a desire to be part of a collaborative and forward-thinking team, we would love to hear from you. At Baseten, we are committed to fostering a diverse and inclusive workplace. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. We are an Equal Opportunity Employer and will consider qualified applicants with criminal histories in a manner consistent with applicable law (by example, the requirements of the San Francisco Fair Chance Ordinance, where applicable).

Location: Montreal, Canada Senior Electrical Satellite Systems Engineer Join a pioneering team shaping the future of LEO commercial satellite missions. From concept to orbit, we design and operate spacecraft that advance connectivity, Earth observation, and in-space infrastructure. As a Senior Electrical Satellite Systems Engineer, you’ll drive mission success by leading the design, integration, and verification of satellite electrical systems, while mentoring junior engineers and collaborating with operators, customers, and launch partners. Key Responsibilities System Design : Lead electrical subsystem design through flight, build, and test phases; define and manage power, data, and reliability budgets. Requirements Management : Develop and maintain system requirements, verification, and test matrices from mission to subsystem levels. Technical Analysis : Conduct power budgets, failure mode, and reliability analyses to ensure system performance. Interface Control : Oversee interface control documents (ICDs) for seamless subsystem integration. Testing & Verification : Design and execute test plans for qualification, LEOP, and environmental testing (TVAC, EMC/EMI). Documentation : Maintain design reports, specifications, and verification matrices. Leadership : Mentor junior engineers and collaborate with software, mechanical, and ground segment teams. Supplier Management : Manage subcontractors and vendors to meet program requirements. Program Support : Contribute to major reviews (SRR, PDR, CDR, TRR, PSR, LRR). Required Skills and Experience Education Bachelor’s or Master’s in Electrical Engineering, Systems Engineering, Aerospace Engineering, or related field. Experience 15+ years in LEO satellite systems design with full lifecycle experience. Technical Expertise Systems Architecture : Define spacecraft electrical architecture for optimal payload-bus integration; manage avionics, power, AOCS, propulsion, TT&C, thermal, and data handling interfaces. Requirements & Traceability : Own requirement flow-down, traceability, and gap analyses to meet mission objectives. Verification & Validation : Lead electrical performance validation, fault management (FDIR), and system integration testing. Operations Support : Interface with launch providers, support LEOP, in-orbit testing, and SOCC activities (telemetry, anomaly resolution). Leadership : Engage stakeholders, lead design reviews, and ensure compliance with ECSS, PUS-STD, and internal standards. Tools & Soft Skills Proficiency in flight engineering software, Agile methods, and modeling tools (e.g., MATLAB). Strong communication with technical and non-technical stakeholders. Proven problem-solving in dynamic, high-stakes environments. Why Join Us Drive commercial space missions redefining global connectivity and exploration. Lead cutting-edge systems engineering, balancing innovation and reliability. Thrive in a high-accountability, collaborative culture with competitive compensation and global launch exposure.

Location: Montreal, Canada; United States Payload System Engineer Role: We are seeking a Telecommunications Payload System Engineer with a strong background in electrical or RF engineering. In this role, you’ll support the definition, design, and verification of advanced digital payload architectures for spaceborne telecommunications systems. Tasks: Contribute to the system architecture design of advanced digital telecom payloads. Support system-level performance and functional analysis, including link budgets and signal routing paths. Participate in Failure Detection, Isolation, and Recovery (FDIR) strategy development and analysis. Assist in RF signal analysis and system-level integration activities. Contribute to the creation and maintenance of payload performance budgets. Support requirements derivation, traceability, and management across subsystems. Collaborate with cross-functional teams to define interfaces and ensure end-to-end system performance. Participate in design reviews, technical documentation, test planning, and troubleshooting throughout the development lifecycle. Must haves: Bachelor’s or Master’s degree in Electrical Engineering, Telecommunications, or a related field. 2–5 years of experience in space systems, satellite communications, or a related discipline. Foundational knowledge of digital signal processing, RF systems, and telecommunications architectures. Relevant Experience with testing of satellite subsystems. Strong attention to detail, analytical mindset, and team-oriented approach. Effective communication and technical documentation skills. Must be eligible to work in Canada and capable of obtaining necessary security clearance. Complementary skills/knowledge: Previous experience in Space and/or Constellation Operations Knowledge of requirements Management tools such as DOORS/Windchill/Jama Demonstrated capability to efficiently work autonomously and with little to no supervision Strong written and verbal communications skills in English, knowledge of French will be considered favorably

Location: Houston, United States Role: As a member of the Systems Engineering Department, the Platform TT&C Systems Engineer will provide technical expertise for the Tracking, Telemetry and Command subsystem that provides a communication path between the satellite and the operations control center. Tasks: Depending on the job function, the Platform TT&C Systems Engineer will perform and participate in the following tasks and activities depending on the background and experience of the candidate: Participate in the design of Platform TT&C systems that operate at various frequency bands Perform system-level link budget analyses Provide input to antenna scattering analyses and review results Support systems engineering documentation including requirements specifications, statement of compliance, verification matrix and design descriptions Prepare interface control documentation for TT&C subsystem interconnection with the other Platform subsystems Troubleshoot TT&C-related issues on integrated satellite and on Platform Engineering Model (FlatSat) test setups Ensure inter-operability between Platform TT&C subsystem and satellite Payload Contribute to overall communication concept of operations (ConOps) Support various milestone reviews: EQSR, SRR, PDR and CDR either at Customer, MDA or subcontractor facilities Requirements: Bachelor’s degree in electrical engineering 5+ years of relevant experience Strong RF engineering background Experience with communication subsystems including transceivers, couplers, filters & antennas Experience with Communication standards and regulations including but not limited to ITU, CCSDS and ETSI Complementary skills/knowledge: Understanding of the space environment and communication satellites Experience with satellite tracking and/or ranging Demonstrated capability to efficiently work with little to no supervision Strong written and verbal communications skills in English, knowledge of French will be evaluated favorably Ability to lead and/or mentor junior members of the engineering team

Location: Houston, United States Role: As a member of the Systems Engineering Department, the Platform RF/EMC Systems Engineer will provide technical expertise necessary to ensure electromagnetic compatibility (EMC) of the Platform system given the radio frequency (RF) environments of the communications payloads. Tasks: Depending on the job function, the Platform RF/EMC Systems Engineer will perform and participate in the following tasks and activities depending on the background and experience of the candidate: Perform EMC analyses and interpret unit-level EMC test reports Review communication Payload RF transmitter/receiver analyses & test results and recommend any necessary design enhancements to ensure electromagnetic compatibility with the Platform subsystems Prepare system-level EMC test plans and conduct satellite-level EMC testing Support Platform design activities related to grounding & shielding and wiring harness signal segregation & routing Troubleshoot EMC-related issues on integrated satellite and Platform Engineering Model (FlatSat) test setups Support RF/EMC aspects of systems engineering documentation including requirements specifications, statement of compliance, verification matrix and design descriptions Support various program reviews: EQSR, SRR, PDR and CDR Requirements: Bachelor’s degree in electrical or aerospace engineering 5+ years of relevant experience Strong RF and/or EMC engineering background Substantial experience with large scale system-level EMC testing Experience with unit-level EMC testing per international standards (or equivalent) methods & testing levels Systems engineering background including experience with RF, digital & analog electronic unit designs and wiring harnesses Complementary skills/knowledge: Understanding of the space environment and communication satellites Demonstrated capability to efficiently work with little to no supervision Ability to lead and/or mentor junior members of the engineering team Strong written and verbal communications skills in English, knowledge of French will be considered favorably