Вакансии

Vultr is looking for a Senior Electrical Design Engineer to develop and review electrical designs for high-density compute facilities.

Location: Tokyo Workplace: Hybrid Role highlights: - Title: Electrical AIT Engineer - Department: Global Manufacturing Organization - Reports to: Head of MAITE Japan - Location: Tokyo, Japan - Type of Contract: Permanent - Working model: On-site - Employment is subject to applicable security screening (incl. SUPO, where required) Why this role matters: As an Electrical AIT Engineer, you own the electrical/avionics side of production at ICEYE end to end -- integration, debugging, continuous improvement, and adapting processes as new designs come through. You will lead satellite-level verification and validation campaigns for power, propulsion, GNC, GPS, and CDH/OBC subsystems, integrate electrical hardware with satellite systems, and own functional and system-health testing to ensure flight readiness. You will act as the primary technical contact for electrical-related integration issues and drive continuous improvement across AIT methods, test efficiency, and build reliability -- ensuring every spacecraft meets ICEYE's standards for mission success. Your day-to-day responsibilities - Execute unit-level and satellite-level verification and validation (V&V) campaigns, focusing on power, propulsion, GNC, GPS, and CDH/OBC functional operations and system health - Lead the integration of electrical/avionics hardware with satellite subsystems (power, propulsion, GNC, GPS, C&DH/OBC, RF, thermal), ensuring seamless interoperability - Test and validate the hardware/software interface -- telemetry and telecommand behavior, CDH bus interfaces, and OBC-driven subsystem responses -- without owning flight software development or debugging, which sits with the Software AIT team - Develop and maintain automated test scripts and frameworks to enhance efficiency, repeatability, and coverage across functional and environmental test campaigns - Act as primary technical contact for electrical-related integration issues, performing root cause analysis and coordinating with power/propulsion/GNC engineering to resolve anomalies - Support production readiness and design reviews (PRR, CDR) by providing feedback on software testability, hardware-in-the-loop requirements, and system configuration - Contribute to and improve AIT documentation including RF test procedures, integration plans, and configuration records - Interface with Global AIT, Power/Propulsion/GNC Engineering, and Mission Operations teams to ensure alignment on product standards and lessons learned - Drive continuous improvement initiatives in integration methods, test efficiency, and build reliability What we’re looking for Must haves: - 3+ years of hands-on experience in electrical/avionics integration, testing, or production of complex systems, preferably in aerospace or high-reliability hardware industries - Deep technical understanding of satellite electrical architectures including power systems, propulsion, GNC, GPS, and/or CDH/OBC - Hands-on experience with anechoic chamber testing (antenna pattern measurement, radiated performance verification) - Working proficiency in Python for test automation and data analysis - Proven experience in multidisciplinary engineering environments with a focus on system-level validation - Familiarity with hardware-in-the-loop (HIL) testing, environmental testing (EMC, vibration, thermal), and configuration management - Systems engineering mindset -- able to anticipate integration risks and connect RF performance, hardware interfaces, and mission operations - Proficient English (written and spoken) for cross-functional collaboration Nice to haves: Experience with Atlassian Cloud tools (Jira, Confluence) - Track record of enabling design-for-testability (DFT) and design-for-manufacturing (DFM) - Lean and Six Sigma experience - Experience with SAR payload calibration or comms link-budget analysis beyond routine test execution - Experience writing or improving Python test scripts beyond routine execution - Proficient Japanese (written and spoken) Application Process - Talent Acquisition Interview - Hiring Manager General Interview - Technical Interview, including a Technical Challenge - Final Interview Working at ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. How We Work (Our Values) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. Benefits Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. Our Commitment to Diversity, Equity, and Inclusion We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Boston, MA Workplace: OnSite At WHOOP, we're on a mission to unlock and inspire performance for life. WHOOP empowers members to perform at a higher level through a deeper understanding of their bodies and daily lives. WHOOP is hiring a Staff Electrical R&D Lead to drive the advanced development of next-generation wearable sensing technologies. As part of the Hardware Engineering team, you will lead the exploration, design, characterization, and validation of novel sensing systems, developing a deep understanding of the complete signal chain - from the underlying physiological signals and sensor interfaces through analog and digital electronics to downstream system requirements. You will combine strong electrical engineering fundamentals, hands-on experimentation, and advanced data analysis to translate complex system behavior into architecture and design improvements that optimize sensing performance. This is a hands-on technical leadership role for an engineer who combines deep electrical expertise with exceptional systems thinking, analytical rigor, and technical judgment. You will guide and mentor engineers while working closely with Electrical, Mechanical, Firmware, Signal Processing, and WHOOP Labs teams to evaluate emerging technologies, define system requirements, identify performance limitations, and drive technical decisions. You will help establish the technical direction for advanced electrical development, balancing innovation with product feasibility, performance, and development timelines. RESPONSIBILITIES: - Lead advanced electrical development initiatives, driving technical direction from early-stage technology exploration and sensor evaluation through feasibility, prototyping, system characterization, and design validation - Develop a deep understanding of the complete sensing signal chain, including sensor behavior, analog front-end performance, electrical interfaces, physiological characteristics, and downstream system requirements, to inform electrical architecture decisions and optimize end-to-end sensing performance. - Define and execute experiments to characterize sensor and system behavior, isolate variables, identify performance limitations, and evaluate interactions across electrical, mechanical, physiological, and environmental conditions - Execute data analysis to translate experimental findings into actionable electrical design improvements, technical recommendations, and quantitative performance requirements. - Drive the evaluation, integration, and validation of new sensing technologies, establishing test methodologies, performance criteria, and system-level requirements that support reliable operation across real-world use cases - Partner closely with Electrical, Mechanical, Firmware, Signal Processing, and WHOOP Labs teams to understand system dependencies, evaluate technical tradeoffs, and ensure electrical designs support broader sensing system performance objectives - Lead complex technical investigations and root-cause analysis, combining first-principles engineering, bench measurements, system telemetry, and structured experimentation to identify risks and drive effective design solutions - Guide and mentor engineers across advanced development projects, setting technical priorities, providing design review and technical direction, and driving cross-functional alignment while maintaining strong hands-on engineering contributions - Translate ambiguous technical challenges into actionable development plans, proactively communicating technical risks, recommendations, and progress while balancing engineering rigor with product and schedule objectives - Remain hands-on with circuit design and simulation, prototype bring-up, hardware debugging, and design iteration, directly contributing to critical technical investigations and design decisions QUALIFICATIONS: - Bachelor's degree or higher in Electrical Engineering or a related technical field, or equivalent practical experience - 8+ years of relevant electrical engineering, hardware R&D, or sensing systems development experience, with demonstrated technical leadership and ownership of complex engineering projects - Deep electrical engineering fundamentals across analog and digital circuit design, sensor interfaces, signal integrity, noise analysis, and system-level electrical architecture - Strong systems-level understanding of sensing technologies - Exceptional hands-on experimentation, hardware characterization, and debugging skills, with the ability to apply first-principles engineering and structured analysis to complex technical challenges - Proficiency in Python or equivalent tools - Demonstrated ability to lead ambiguous, cross-functional technical initiatives, guide engineering decisions, mentor other engineers, and drive technical challenges to resolution - Strong commitment to embracing and leveraging AI tools in day-to-day tasks, ensuring AI-assisted work aligns with the same high-quality standards as personal contributions

Location: Bangladesh; Brazil; Colombia; Egypt; Ghana; India About Gramian Gramian Consultancy is a boutique consultancy specializing in IT professional services and engineering talent solutions. With a strong background in software engineering and leadership, we help companies build high-performing teams by matching them with professionals who truly fit their needs. About the Role We are seeking an experienced Computer Science, Electrical Engineering, or Computer Engineering Expert to lead a team of technical trainers developing realistic, terminal-based tasks for advanced AI training and evaluation. You will oversee a pod of approximately 5–10 trainers, review tasks for technical accuracy, reproducibility, and grading reliability, and ensure they reflect authentic software, computational, and electrical engineering workflows. This role combines advanced technical expertise, computational problem-solving, quality assurance, and team leadership to help evaluate and improve next-generation AI systems. CONTRACT: Contractor assignment, 4 weeks COMMITMENT: Hourly, up to 40h/week LOCATIONS: Remote - Bangladesh, Brazil, Colombia, Egypt, Ghana, India, Pakistan, Indonesia, Kenya, Nigeria, Turkey, Vietnam PROCESS: AI Interview NOTES: PhD Degree is mandatory! Key Responsibilities Lead and mentor a team of 5–10 technical trainers, ensuring consistent quality, productivity, and timely task delivery. Review technical tasks end to end, including problem statements, codebases, circuit netlists, hardware description languages (HDL), datasets, computational environments, reference solutions, and automated tests. Validate tasks involving high-performance computing (HPC), parallel computing, algorithms, distributed systems, compilers, operating systems, databases, machine learning systems, GPU computing, circuit design, signal processing, power systems, and embedded systems. Ensure tasks reflect realistic software engineering, research, and electrical engineering workflows requiring meaningful, multi-step technical reasoning. Verify technical correctness across algorithm complexity, numerical accuracy, memory management, concurrency, circuit laws, power balance, signal processing, timing constraints, and system stability. Validate compilers, simulation tools, software dependencies, computational environments, and build processes to ensure reproducible results. Identify unreliable tests caused by nondeterministic behavior, race conditions, hardware-dependent performance thresholds, or simulation convergence issues. Review automated graders to ensure they assess meaningful technical outputs, including functional correctness, performance, frequency response, waveforms, timing, efficiency, and system behavior. Identify technical inaccuracies, flawed assumptions, incorrect tolerances, and ways tasks could be bypassed without genuine computation or engineering analysis. Provide actionable technical feedback, track revisions, and ensure quality issues are resolved before task approval. Onboard trainers, allocate work, monitor quality and throughput, resolve technical blockers, and maintain technical documentation and best practices. Requirements PhD, postdoctoral experience, or equivalent advanced technical expertise in Computer Science, Electrical Engineering, Computer Engineering, or a closely related discipline. Strong programming skills in C/C++, Rust, Python, Julia, Fortran, MATLAB/Octave, or hardware description languages (HDL). Advanced proficiency in Linux and command-line environments. Hands-on expertise in at least one major area, such as parallel computing, systems programming, scientific software development, circuit simulation, signal processing, power systems, or digital hardware design. Strong understanding of algorithms, computational systems, numerical methods, software testing, or electrical engineering principles. Experience reviewing complex codebases, technical implementations, engineering simulations, or research outputs. Ability to evaluate algorithm correctness, computational performance, numerical accuracy, concurrency behavior, and technical reliability. Strong analytical judgment and the ability to identify technical errors, edge cases, race conditions, and flawed engineering assumptions. Experience mentoring, reviewing, or leading small technical teams. Excellent written communication skills for precise technical feedback and documentation.

Location: Turkey; Nigeria; Kenya; Pakistan; Indonesia; Vietnam About Gramian Gramian Consultancy is a boutique consultancy specializing in IT professional services and engineering talent solutions. With a strong background in software engineering and leadership, we help companies build high-performing teams by matching them with professionals who truly fit their needs. About the Role We are seeking an experienced Computer Science, Electrical Engineering, or Computer Engineering Expert to lead a team of technical trainers developing realistic, terminal-based tasks for advanced AI training and evaluation. You will oversee a pod of approximately 5–10 trainers, review tasks for technical accuracy, reproducibility, and grading reliability, and ensure they reflect authentic software, computational, and electrical engineering workflows. This role combines advanced technical expertise, computational problem-solving, quality assurance, and team leadership to help evaluate and improve next-generation AI systems. CONTRACT: Contractor assignment, 4 weeks COMMITMENT: Hourly, up to 40h/week LOCATIONS: Remote - Bangladesh, Brazil, Colombia, Egypt, Ghana, India, Pakistan, Indonesia, Kenya, Nigeria, Turkey, Vietnam PROCESS: AI Interview NOTES: PhD Degree is mandatory! Key Responsibilities Lead and mentor a team of 5–10 technical trainers, ensuring consistent quality, productivity, and timely task delivery. Review technical tasks end to end, including problem statements, codebases, circuit netlists, hardware description languages (HDL), datasets, computational environments, reference solutions, and automated tests. Validate tasks involving high-performance computing (HPC), parallel computing, algorithms, distributed systems, compilers, operating systems, databases, machine learning systems, GPU computing, circuit design, signal processing, power systems, and embedded systems. Ensure tasks reflect realistic software engineering, research, and electrical engineering workflows requiring meaningful, multi-step technical reasoning. Verify technical correctness across algorithm complexity, numerical accuracy, memory management, concurrency, circuit laws, power balance, signal processing, timing constraints, and system stability. Validate compilers, simulation tools, software dependencies, computational environments, and build processes to ensure reproducible results. Identify unreliable tests caused by nondeterministic behavior, race conditions, hardware-dependent performance thresholds, or simulation convergence issues. Review automated graders to ensure they assess meaningful technical outputs, including functional correctness, performance, frequency response, waveforms, timing, efficiency, and system behavior. Identify technical inaccuracies, flawed assumptions, incorrect tolerances, and ways tasks could be bypassed without genuine computation or engineering analysis. Provide actionable technical feedback, track revisions, and ensure quality issues are resolved before task approval. Onboard trainers, allocate work, monitor quality and throughput, resolve technical blockers, and maintain technical documentation and best practices. Requirements PhD, postdoctoral experience, or equivalent advanced technical expertise in Computer Science, Electrical Engineering, Computer Engineering, or a closely related discipline. Strong programming skills in C/C++, Rust, Python, Julia, Fortran, MATLAB/Octave, or hardware description languages (HDL). Advanced proficiency in Linux and command-line environments. Hands-on expertise in at least one major area, such as parallel computing, systems programming, scientific software development, circuit simulation, signal processing, power systems, or digital hardware design. Strong understanding of algorithms, computational systems, numerical methods, software testing, or electrical engineering principles. Experience reviewing complex codebases, technical implementations, engineering simulations, or research outputs. Ability to evaluate algorithm correctness, computational performance, numerical accuracy, concurrency behavior, and technical reliability. Strong analytical judgment and the ability to identify technical errors, edge cases, race conditions, and flawed engineering assumptions. Experience mentoring, reviewing, or leading small technical teams. Excellent written communication skills for precise technical feedback and documentation.

Location: US, Boston, MA Workplace: OnSite Here at Humanoid, we believe in a future where robots amplify human potential. That’s why we’ve set out on a mission to build the world’s most capable, commercially-scalable, and safe humanoid robots. We’re bringing that mission to life with HMND‑01 - our rapidly developed humanoid platform being deployed in real industrial environments - and we’re growing the team to take it even further. ABOUT THE ROLE As a Senior Electrical Engineer on the Hardware team in Boston, you’ll design and develop the electrical systems that bring advanced humanoid robots to life. This is a hands-on role where you’ll work across the full spectrum of robotics electrical engineering—from electrical system designs, electromechanical integrations, PCB layouts, firmware and device programming, to hands-on debugging in the lab. Your work will span from small test systems to fully integrated prototype robots, and provide you with a unique opportunity to have a big impact. WHAT YOU’LL DO - Design Electrical Systems for Robotics: Develop electrical systems that power and control Humanoid’s advanced robots, with a focus on sensors, compute architecture, and power systems. - Conduct Circuit Analysis and Debugging: Use strong circuit analysis fundamentals to review electrical designs, conduct failure analysis, and troubleshoot complex electrical systems. - PCB Design and Schematic Capture: Create detailed schematics and PCB layouts using Altium, ensuring the designs meet the performance, reliability, and manufacturability standards required for robotics. - Develop Embedded Firmware: Write firmware in C and HDL to program microcontrollers, DSPs, and FPGAs, testing and refining embedded designs to ensure optimal performance. - Leverage Linux for Robotics: Utilize your knowledge of command-line Linux to configure networks, run software, and interface with robots for testing and validation. - Hands-On Lab Work: Use a variety of lab equipment, including oscilloscopes, DMMs, power supplies, programmable loads, and spectrum analyzers, to validate designs and solve complex electrical engineering challenges. - Collaborate Across Teams: Work closely with mechanical engineers, software developers, and other team members to integrate electrical systems with robotics hardware, ensuring seamless operation and performance. WHAT WE'RE LOOKING FOR - Experience with high-speed data technologies such as PCIE, Ethernet, EtherCAT and/or other communication protocols in PCB-based devices and systems. - Experience developing power regulation and distribution systems, including particular expertise with short-circuit protection systems, switching power supplies, and creative power management technologies. - Proficiency with PCB design tools (e.g., Altium) for schematic capture and layout. - Familiarity with embedded programming, including C, HDL, and other relevant languages for microcontrollers, DSPs, and FPGAs. - Working knowledge of circuit simulation, analysis, and debugging techniques, including the use of oscilloscopes, power supplies, and spectrum analyzers. - Experience with Python, C++, LabView, or MATLAB for automation and testing. - Knowledge of SolidWorks or similar mechanical CAD tools. - Familiarity with Verilog or VHDL for hardware design and simulation. - Experience in building Linux kernels and modifying or writing device drivers. Please note: few people will check every single box. If you’ve got solid electrical engineering fundamentals and strengths in some of these areas, we’d love to hear from you! WHAT WE OFFER - Comprehensive health coverage for US‑based employees, including fully paid medical, dental, and vision insurance, with virtual care and employee assistance resources. - Generous time off to rest and recharge: 23 days of PTO (accrued), separate sick leave, and paid company holidays. - 401(k) retirement plan with a 4% employer match. - Meaningful equity with upside as we scale - Free daily catered lunch, snacks, and drinks in‑office. - Collaboration with top‑tier engineers, researchers, and product experts in AI and robotics. - Freedom to influence the product and own key initiatives. For this role in Massachusetts, the expected base salary range is $160K–$215K USD per year; your placement in that range depends on how your experience maps to our internal leveling.

Location: Montreal, Canada 📍 Location: Montreal, Quebec, Canada 📄 Employment Type: Full-Time 🏢 Work Arrangement: TBD 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Important Screening Requirements Must be eligible to work in Canada and capable of obtaining the required security clearance. Bachelor’s or Master’s degree in Electrical Engineering, Systems Engineering, Aerospace Engineering, or a related field. 15+ years of experience in satellite systems design, particularly for Low Earth Orbit (LEO) missions. Experience supporting the full satellite systems lifecycle, from design through verification, launch, and operations. Strong background in electrical system architecture, payload-bus integration, and subsystem interfaces. Experience with requirements management, system verification and validation, and technical documentation. Proficiency in MATLAB and familiarity with Agile methodologies. Senior Electrical Satellite Systems Engineer- JD.pdf About the Role We are seeking a Senior Electrical Satellite Systems Engineer to lead electrical systems engineering activities for satellite programs, with a focus on Low Earth Orbit (LEO) missions. The successful candidate will define electrical system architecture, oversee subsystem interfaces, manage requirements and technical documentation, and lead verification and validation activities throughout the satellite lifecycle. This role also involves technical leadership, stakeholder coordination, subcontractor oversight, and support for launch and early operations. Senior Electrical Satellite Systems Engineer- JD.pdf What We’re Looking For We’re looking for a senior-level satellite systems engineer with deep electrical systems expertise, strong end-to-end lifecycle experience, and the ability to lead complex technical activities across design, integration, verification, and operations. The ideal candidate combines systems-level thinking with practical engineering judgment, clear communication, and effective technical leadership. Senior Electrical Satellite Systems Engineer- JD.pdf Key Responsibilities System Design & Architecture Define electrical system architecture supporting payload and satellite bus integration. Manage system requirements, traceability, and technical documentation, including Concept of Operations (CONOPS). Oversee interfaces among satellite subsystems, including avionics, electrical power, and Attitude and Orbit Control Systems (AOCS). Coordinate system-level design activities to ensure compatibility across subsystems. Analysis & Reliability Conduct electrical power budgets and system-level analyses. Perform failure mode and reliability analyses. Develop and support Fault Detection, Isolation, and Recovery (FDIR) strategies. Identify system risks and support technical trade-off decisions. Verification & Validation Lead system verification and validation (V&V) activities. Develop verification strategies, test plans, and supporting documentation. Support ground testing, including Thermal Vacuum (TVAC) and Electromagnetic Compatibility/Interference (EMC/EMI) testing. Ensure verification activities address system requirements and interface performance. Testing & Operations Develop system-level test plans and procedures. Support launch preparation, Launch and Early Orbit Phase (LEOP), and Satellite Operations Control Centre (SOCC) activities. Assist with troubleshooting and resolving system-level issues during testing and operations. Senior Electrical Satellite Systems Engineer- JD.pdf Technical Leadership & Stakeholder Coordination Mentor engineers and provide technical guidance to engineering teams. Coordinate with stakeholders, subcontractors, and cross-functional engineering groups. Lead and participate in design reviews, including: System Requirements Review (SRR) Preliminary Design Review (PDR) Critical Design Review (CDR) Apply relevant engineering standards and practices, including ECSS and PUS-STD. Project & Process Management Oversee subcontractor activities and technical deliverables. Track technical issues, risks, and project progress. Support Agile engineering practices and continuous improvement initiatives. Senior Electrical Satellite Systems Engineer- JD.pdf Required Qualifications Bachelor’s or Master’s degree in Electrical Engineering, Systems Engineering, Aerospace Engineering, or a related discipline. 15+ years of satellite systems design experience, particularly involving LEO missions. Experience across the full satellite systems lifecycle. Strong understanding of electrical system architecture and payload-bus integration. Experience with avionics, electrical power, AOCS, and related subsystem interfaces. Experience with requirements management, traceability, and system documentation. Background in power budgeting, failure mode analysis, reliability engineering, and FDIR. Experience leading system-level verification and validation. Knowledge of ground testing, including TVAC and EMC/EMI. Experience supporting launch, LEOP, and satellite operations activities. Proficiency in MATLAB and familiarity with Agile methodologies. Strong communication, leadership, analytical, and problem-solving skills. Must be eligible to work in Canada and able to obtain the necessary security clearance. Senior Electrical Satellite Systems Engineer- JD.pdf Preferred Qualifications Experience with ECSS standards and PUS-STD. Experience leading satellite design reviews and coordinating technical stakeholders. Experience overseeing subcontractors and managing technical deliverables. Experience mentoring engineers and leading multidisciplinary engineering teams.

Location: Boston, MA Workplace: OnSite At WHOOP, we're on a mission to unlock and inspire performance for life. WHOOP empowers members to perform at a higher level through a deeper understanding of their bodies and daily lives. WHOOP is hiring an Electrical Engineer II to help advance the performance, reliability, and scalability of WHOOP wearable technology and supporting hardware. As a member of the Hardware Engineering team, you will play a hands-on role in designing, testing, characterizing, debugging, and improving electrical systems throughout the product lifecycle, from early development and prototyping through high-volume production and continuous improvement. You will work closely with Electrical, Mechanical, Firmware, Manufacturing, Quality, and Supply Chain teams to investigate complex technical challenges, develop and validate robust solutions, and drive improvements in product performance, quality, reliability, and manufacturability. RESPONSIBILITIES: - Design, test, characterize, debug, and optimize low-power, mixed-signal electronic circuits and systems across new product development and continuous improvement initiatives - Contribute to schematic design, component selection, PCB development, hardware prototyping, board bring-up, and design iteration to improve system performance, robustness, and manufacturability - Develop and execute electrical experiments, characterization plans, and validation testing to understand system behavior, investigate failures, identify root causes, and guide engineering decisions - Analyze test data and troubleshoot electrical issues to drive improvements in circuit performance, power consumption, signal integrity, reliability, production yield, and cost - Collaborate across Electrical, Mechanical, Firmware, Manufacturing, Quality, and Supply Chain teams, as well as with suppliers and contract manufacturers, to resolve technical challenges and implement robust hardware solutions - Support hardware through design verification, validation, new product introduction (NPI), and ongoing production, including engineering change orders (ECOs) and design improvements; travel up to 15% domestically and internationally to collaborate with partners and suppliers QUALIFICATIONS: - Bachelor's degree in Electrical Engineering or a related technical field, or equivalent practical experience - 3+ years of relevant electrical engineering experience designing, developing, testing, debugging, or supporting electronic hardware - Strong understanding of electrical engineering fundamentals, including analog and digital circuit design, power management, signal integrity, component fundamentals, and common communication interfaces - Hands-on experience designing, prototyping, testing, characterizing, and debugging electrical circuits and systems using standard laboratory equipment - Experience reading and developing schematics and working with ECAD tools such as Altium or equivalent - Experience with hardware development, validation, or production support, including exposure to design verification, failure analysis, design iteration, or manufacturing processes - Strong analytical and problem-solving skills, with the ability to use data, experimentation, and cross-functional collaboration to investigate complex technical problems and drive effective solutions - Strong commitment to embracing and leveraging AI tools in day-to-day tasks, ensuring AI-assisted work aligns with the same high-quality standards as personal contributions. This role is based in the WHOOP office located in Boston, MA. The successful candidate must be prepared to relocate if necessary to work out of the Boston, MA office.   Interested in the role, but don’t meet every qualification? We encourage you to still apply! At WHOOP, we believe there is much more to a candidate than what is written on paper, and we value character as much as experience. As we continue to build a diverse and inclusive environment, we encourage anyone who is interested in this role to apply.   WHOOP is an Equal Opportunity Employer and participates in E-verify https://www.e-verify.gov/ to determine employment eligibility. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.   The WHOOP compensation philosophy is designed to attract, motivate, and retain exceptional talent by offering competitive base salaries, meaningful equity, and consistent pay practices that reflect our mission and core values.   At WHOOP, we view total compensation as the combination of base salary, equity, and benefits, with equity serving as a key differentiator that aligns our employees with the long-term success of the company and allows every member of our corporate team to own part of WHOOP and share in the company’s long-term growth and success.   The U.S. base salary range for this full-time position is $110,000 - $150,000. Salary ranges are determined by role, level, and location. Within each range, individual pay is based on factors such as job-related skills, experience, performance, and relevant education or training.   In addition to the base salary, the successful candidate will also receive benefits and a generous equity package.   These ranges may be modified in the future to reflect evolving market conditions and organizational needs. While most offers will typically fall toward the starting point of the range, total compensation will depend on the candidate’s specific qualifications, expertise, and alignment with the role’s requirements.

Location: Sainte-Anne-de-Bellevue, Canada 📍 Location: Sainte-Anne-de-Bellevue, QC, Canada 📄 Employment Type: Full-Time 🏢 Work Arrangement: Remote available for U.S. and Canadian Citizens 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Remote & Relocation Opportunities U.S. and Canadian Citizens: Remote work arrangement available. UK and European Candidates: Relocation assistance/allowance and a relocation bonus are available for qualified candidates willing to relocate to Canada. Candidates should be prepared to support collaboration across multidisciplinary spacecraft engineering teams. Important Screening Requirements Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Physics, or a related field . 8+ years of Electrical Power System (EPS) design experience on LEO/MEO satellite platforms. Deep knowledge of spacecraft bus subsystems and their interactions . Experience with power electronics design and power management hardware . Strong understanding of aerospace systems engineering fundamentals. Hands-on experience supporting systems integration, testing, and troubleshooting . Experience with Confluence and JIRA . Ability to work effectively with limited supervision. Strong analytical and problem-solving skills. Excellent written and oral communication skills in English. French is an asset. About the Role We are seeking an experienced Satellite Electrical Power System (EPS) Design Engineer to support the concept, detailed design, analysis, verification, and integration of electrical power subsystems for current and next-generation remote sensing and communications satellites . The role focuses on the design and development of solar arrays, power-conditioning units, batteries, power distribution, and regulation systems , while working closely with multidisciplinary teams across payload, spacecraft bus, thermal, structural, avionics, and mission systems. The successful candidate will contribute to the development of reliable, high-performance EPS solutions throughout the spacecraft lifecycle, from early architecture and trade studies through integration, launch, and on-orbit operations. What We’re Looking For We’re looking for a senior spacecraft electrical power systems engineer with strong experience designing and integrating EPS architectures for satellite platforms. The ideal candidate can work across the full EPS lifecycle, from power architecture and trade studies through detailed design, modeling, verification, spacecraft integration, launch, and on-orbit support . Strong candidates will combine deep power electronics and spacecraft EPS expertise with hands-on systems integration, analytical problem-solving, and the ability to work effectively across multidisciplinary engineering teams. Key Responsibilities Architecture & Requirements Define EPS architectures covering power generation, energy storage, and distribution while meeting mission power, mass, volume, and reliability requirements. Perform architecture and technology trade studies involving: Solar cell technologies Battery chemistries Regulator topologies Develop system requirements and functional flow block diagrams. Develop and maintain Interface Control Documents (ICDs) and design descriptions. Manage requirements and maintain bidirectional traceability throughout the program lifecycle. Detailed Design & Analysis Size and evaluate: Solar arrays Power-conditioning units Battery packs Power distribution units Build and validate high-fidelity electrical models for spacecraft operating modes. Perform FMECA and fault-detection analysis . Develop and maintain power budget models. Perform load-flow and thermal-power coupling analyses. Conduct survivability analyses for: Eclipse operations Safe mode Fault-tolerant operation Analyze EPS performance across different spacecraft mission phases and operating conditions. Cross-Functional Coordination Present technical status, risk analyses, and trade-study results to senior management. Interface with spacecraft bus teams across: Power Thermal Structures Avionics Develop and maintain high-fidelity power models for mission analysis, including: Orbit raising Station keeping De-orbit Develop tools supporting power efficiency and optimization. Support Phase 0 and pre-Phase A activities. Collaborate with multidisciplinary engineering teams throughout the spacecraft lifecycle. Integration & Verification Author Verification Plans, Test Matrices, and Validation Procedures for unit and EPS subsystem testing. Support ground-test and integration campaigns. Support: Fueling activities Thermal-vacuum testing EMI/EMC testing Spacecraft-level integration Analyze test data and support anomaly resolution. Close out anomalies and update design baselines. Support flight software integration. Technical Leadership & Mentorship Mentor and guide junior and intermediate systems engineers and interns. Lead or support multidisciplinary engineering activities. Serve as a technical liaison with customers, partners, and external vendors. Contribute to continuous improvement initiatives. Contribute to engineering knowledge bases, processes, and standards development. Configuration, Documentation & Standards Maintain EPS design and safety standards. Ensure engineering analyses, software, documentation, and deliverables are properly version controlled within the PLM environment. Support spacecraft design reviews, including: SRR PDR CDR MRR/TRR Support technology road-mapping and innovation activities. Launch, On-Orbit & Operations Support Support launch-site interface checklists with the responsible launch vehicle interface engineer. Support pre-launch checkout procedures. Support early-orbit checkout scripts. Provide real-time EPS engineering support during: Launch On-orbit commissioning Anomaly investigations Contingency operations Support Satellite Operations Handbook (SOOH) development and associated operator training. Required Qualifications Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Physics, or a related field . 8+ years of EPS system design experience on LEO/MEO satellite platforms. Deep knowledge of spacecraft bus subsystems and their interactions. Experience with power electronics design and power management hardware. Strong understanding of aerospace systems engineering fundamentals. Hands-on experience supporting systems integration and testing . Strong troubleshooting and problem-solving capabilities. Experience with Confluence and JIRA . Ability to work efficiently with limited supervision. Ability to break down complex technical problems and develop practical solutions. Excellent written and oral communication skills in English. Preferred Qualifications Experience designing EPS architectures for remote sensing or communications satellites . Experience with solar array, battery, power-conditioning, and power-distribution systems. Experience with high-fidelity spacecraft power modeling . Experience with FMECA, fault detection, survivability analysis, and reliability engineering. Experience supporting thermal-vacuum, EMI/EMC, and spacecraft-level integration testing . Experience with mission-phase power analysis, including orbit raising, station keeping, eclipse, safe mode, and de-orbit. Experience developing tools for power efficiency and optimization. Experience supporting spacecraft launch-site and on-orbit operations . Experience with spacecraft design reviews and lifecycle processes. French language skills are an asset.

Location: Montreal, Canada 📍 Location: Montreal, Canada 📄 Employment Type: Full-Time 🏢 Work Arrangement: Remote Opportunity for US and Canadian citizens. Relocation allowance + bonus for European and UK Candidates. 🚀 Start Date: Immediate 💰 Compensation: TBD -- based on skills and experience Important Screening Requirements Must be eligible to obtain or hold Controlled Goods Program (CGP) clearance . H-1B visa holders are welcome to apply. Remote Opportunity for US and Canadian citizens. Relocation allowance + bonus for European and UK Candidates. About the Role We are seeking a Satellite Platform Electrical Systems Engineer to support the design, integration, and validation of electrical systems for advanced satellite platforms. In this role, you will contribute to the development of spacecraft electrical power systems, electronic subsystems, and platform integration while collaborating with multidisciplinary engineering teams to ensure mission success. The ideal candidate has a strong background in electrical systems engineering and experience supporting satellite or aerospace platforms. Key Responsibilities Design, analyze, and support the integration of satellite platform electrical systems. Develop and validate electrical power generation, storage, and distribution systems. Support the design and integration of electronic units, wiring harnesses, and electrical interfaces. Perform system-level testing, verification, and troubleshooting of electrical subsystems. Ensure compliance with system requirements, performance objectives, and engineering standards. Collaborate with multidisciplinary teams to support satellite platform development and integration. Prepare technical documentation, engineering analyses, and design recommendations. Support system validation activities throughout the project lifecycle. Required Qualifications Bachelor's degree in Electrical Engineering or an equivalent engineering discipline. 5+ years of relevant engineering experience. Experience with: System-level electrical power generation, storage, and distribution Satellite or aerospace electrical systems engineering Electronic unit design and integration Wiring harness design and electrical interfaces Data bus protocol standards System-level integration, testing, and validation Strong understanding of electrical system architecture, troubleshooting, and performance analysis. Preferred Qualifications Experience supporting satellite platform development or spacecraft electrical systems. Knowledge of space-qualified electrical components and avionics. Experience with spacecraft integration, verification, and environmental testing. Strong analytical, problem-solving, and cross-functional collaboration skills.

Location: Costa Mesa, United States 📍 Location: Costa Mesa, California, USA 📄 Employment Type: Full-Time 🏢 Work Arrangement: Remote Opportunity 🚀 Start Date: Immediate 💰 Compensation: TBD -- based on skills and experience Important Screening Requirements Must be a U.S. Citizen or U.S. Permanent Resident (Green Card holder) . Must be eligible to obtain and maintain an active U.S. Security Clearance . Candidates should have a strong interest in supporting advanced defense and national security programs. About the Role We are seeking an experienced Electrical Engineer, Avionics Design to support the design, development, integration, and testing of advanced avionics and embedded electronic systems. In this role, you will lead full-cycle PCB development, design power management systems, integrate embedded hardware, and collaborate with multidisciplinary engineering teams to deliver mission-critical aerospace solutions. The ideal candidate has a strong background in mixed-signal electronics, power systems, PCB design, and embedded hardware development. Key Responsibilities Lead full-cycle PCB design, including requirements gathering, schematic capture, component selection, layout review, bring-up, testing, debugging, and system integration. Design and integrate microcontroller-based systems and support hardware bring-up activities. Troubleshoot complex hardware and software integration issues using laboratory equipment and software debugging tools. Design and integrate power management systems and power distribution architectures. Develop payloads and electronic subsystems, including sensors, networking, payload interfaces, and power management solutions. Create system interconnect diagrams and define cable harnesses for subsystem integration. Collaborate with electrical, mechanical, software, firmware, and test engineering teams throughout the product development lifecycle. Participate in peer design reviews and cross-functional engineering reviews to ensure high-quality system designs. Required Qualifications Bachelor's degree in Electrical Engineering or an equivalent engineering discipline. 3+ years of experience designing, testing, and troubleshooting complex electrical systems. Experience performing power system analysis, electrical loading analysis, simulation, and validation. Strong experience with: Power design and power management systems Microcontroller design and hardware bring-up Mixed-signal PCB design, including multilayer boards, impedance matching, grounding, filtering, and board protection Low- and high-voltage power electronics and control systems System interconnect diagrams and cable harness design Proficiency using laboratory equipment, including: Oscilloscopes Digital Multimeters (DMMs) Spectrum Analyzers Logic Analyzers Benchtop Power Supplies Electronic Loads Familiarity with thermal and EMI testing environments. Knowledge of common communication interfaces, including: CAN I2C SPI Ethernet RS-232/422 RS-485 USB Excellent communication, organizational, analytical, and problem-solving skills. Must be eligible to obtain and maintain an active U.S. Security Clearance . Preferred Qualifications Experience designing embedded systems for aerospace, defense, or high-end consumer electronics. Experience with battery systems, AC power systems, and advanced power distribution architectures. Experience developing low-level firmware for hardware bring-up and testing. Background supporting defense, aerospace, or missile systems. Strong understanding of the effects of temperature, vibration, and harsh operating environments on electrical system design.

Location: Dhahran, Saudi Arabia Eram Talent, a leading Talent Acquisition Company, is seeking a qualified and experienced HV Technician - Electrical to join a prestigious company in the industry. As a HV Technician, you will be responsible for working with high voltage electrical systems, ensuring that maintenance, troubleshooting, and repairs are conducted safely and efficiently. This role offers an exciting opportunity to contribute to important projects and be part of a team of skilled professionals. If selected, this opportunity would be onsite at Saudi Arabia. Responsibilities Install, maintain, and repair high voltage electrical equipment and systems. Conduct preventive maintenance and inspections on electrical systems to enhance reliability and performance. Troubleshoot electrical faults and provide effective solutions to restore system functionality. Ensure compliance with safety regulations and standards while working on high voltage systems. Coordinate with other team members and departments to minimize downtime during maintenance activities. Maintain accurate records of maintenance activities, equipment status, and inspection reports. Stay updated with advancements in high voltage technology and industry best practices. Participate in safety training and promote a culture of safety in the workplace. Requirements Technical diploma or certification in Electrical Engineering or a related field. Minimum of 5 years of experience working with high voltage electrical systems. Strong knowledge of electrical safety protocols and high voltage regulations. Experience with the installation and maintenance of substations, transformers, and switchgears. Excellent troubleshooting skills and ability to interpret electrical schematics. Strong attention to detail and commitment to safety standards. Good communication and organizational skills. Ability to work effectively both independently and as part of a team. Willingness to work in various conditions and on-call as required.

Location: Dammam, Saudi Arabia We are seeking an experienced Electrical Senior Estimation & Design Engineer / Manager with 10+ years of experience in electrical estimation, design, BOQ preparation, and project bidding. The ideal candidate should have strong expertise in interpreting electrical drawings, preparing accurate quantity take-offs, developing electrical designs, and coordinating with vendors and bidding teams. Key Responsibilities Review and analyze project drawings, specifications, and requirements to determine project scope, materials, and equipment. Perform quantity take-offs and determine material and resource requirements. Prepare BOQs from MEP electrical drawings and Single Line Diagrams (SLDs). Prepare and review electrical design calculations, drawings, specifications, and BOMs . Prepare Protection Single Line Diagrams and ensure designs comply with applicable international codes and standards. Perform electrical estimation and BOQ preparation for industrial and residential facilities . Coordinate with the bidding team for project estimation and tender submissions. Coordinate with vendors and negotiate pricing and commercial terms to achieve competitive project costs. Carry out transformer sizing, DG sizing, load calculations, cable sizing, cable schedules, circuit breaker sizing, and protection system sizing . Prepare electrical layouts and Single Line Diagrams using AutoCAD . Requirements Key Responsibilities Review and analyze project drawings, specifications, and requirements to determine project scope, materials, and equipment. Perform quantity take-offs and determine material and resource requirements. Prepare BOQs from MEP electrical drawings and Single Line Diagrams (SLDs). Prepare and review electrical design calculations, drawings, specifications, and BOMs . Prepare Protection Single Line Diagrams and ensure designs comply with applicable international codes and standards. Perform electrical estimation and BOQ preparation for industrial and residential facilities . Coordinate with the bidding team for project estimation and tender submissions. Coordinate with vendors and negotiate pricing and commercial terms to achieve competitive project costs. Carry out transformer sizing, DG sizing, load calculations, cable sizing, cable schedules, circuit breaker sizing, and protection system sizing . Prepare electrical layouts and Single Line Diagrams using AutoCAD . Requirements 10+ years of relevant experience in Electrical Estimation and Design. Strong experience in BOQ preparation, quantity take-offs, and electrical estimation . Hands-on experience with SLD preparation and interpretation . Strong knowledge of electrical design calculations and equipment sizing. Experience working with MEP electrical drawings for industrial and residential projects. Proficiency in AutoCAD . Good understanding of international electrical codes and standards. Strong vendor coordination, negotiation, and bidding/tendering skills.

Execution Planning and Detailed Design of the turnaround scope for the Injection Failure Mitigation Project (IFMP) by NCOC. The project will be carried out offshore at Kashagan.

Location: Abqaiq, Saudi Arabia We are looking for an experienced Senior Electrical Engineer with 20+ years of experience in electrical engineering, project execution, construction, and commissioning. The candidate should have strong expertise in large-scale power generation, transmission, and distribution projects. Key Responsibilities Lead electrical engineering, construction, pre-commissioning, and commissioning activities. Ensure project execution complies with contract requirements, schedule, cost, HSE, quality, and company procedures. Review electrical designs, drawings, specifications, and technical documentation. Supervise electrical equipment installation, testing, inspection, and commissioning. Coordinate with project managers, engineers, contractors, vendors, clients, and other stakeholders. Conduct site inspections and resolve technical and construction issues. Ensure electrical systems are designed and installed in accordance with applicable standards and project requirements. Requirements Bachelor’s Degree in Electrical Engineering. 20+ years of relevant experience in electrical engineering and project management/execution. Strong experience in power generation, transmission, and distribution systems. Hands-on experience in equipment installation, testing, pre-commissioning, and commissioning. Proficiency in ETAP and familiarity with Flowstar, MS Office, PLC, SCADA, DCS, network communication protocols, and vibration analysis software . Knowledge of electrical design principles, power systems, circuit analysis, and control systems. Experience with laser alignment tools , equipment, and construction tooling. Strong communication, leadership, and stakeholder management skills. Full professional proficiency in English. Preferred Certifications Vibration Analyst – ISO Category I Certified Seal Assembly Artisan

Location: Costa Mesa, United States 📍 Location: Costa Mesa, California, USA 📄 Employment Type: Full-Time 🏢 Work Arrangement: On-site/Remote 🚀 Start Date: Immediate 💰 Compensation: TBD -- based on skills and experience Important Screening Requirements Must be a U.S. Citizen or U.S. Permanent Resident (Green Card holder) . Must be eligible to obtain and maintain an active U.S. Department of Defense (DoD) Secret Security Clearance . Candidates should have a strong interest in supporting advanced defense and national security programs. About the Role We are seeking an experienced Senior Electrical Engineer, EMI/EMC Design to lead EMI/EMC design, analysis, testing, and mitigation activities for advanced electrical and electronic systems. In this role, you will work across the product development lifecycle to identify and resolve electromagnetic compatibility challenges, support PCB and system-level design, and ensure compliance with applicable military and industry standards. Key Responsibilities Lead EMI/EMC design, analysis, testing, and mitigation activities for complex electrical systems. Perform Electromagnetic Environmental Effects (E3) analysis and develop mitigation strategies. Support specialized E3 areas including HERO, HEMP, lightning protection, ESD, RF exposure limits, and operational electromagnetic compatibility . Plan and execute EMI/EMC testing using laboratory equipment such as spectrum analyzers, oscilloscopes, antennas, and LISNs. Use simulation tools to analyze and troubleshoot EMI/EMC issues. Review PCB layouts and electrical designs to ensure mechanical, electrical, EMI/EMC, and manufacturing requirements are met. Read and interpret schematics and recommend appropriate design practices, grounding, filtering, and protection techniques. Collaborate with electrical, mechanical, software, firmware, and systems engineering teams to resolve EMI/EMC issues. Prepare technical reports, test documentation, and engineering recommendations. Manage multiple engineering activities while meeting technical and schedule objectives. Required Qualifications Bachelor's degree in Electrical Engineering, Electronics Engineering , or a related field. 7+ years of experience in EMI/EMC design and testing . Familiarity with EMC/EMI standards and regulations, including: MIL-STD-461G MIL-STD-464D RTCA DO-160 FCC IEC CISPR SAE Proven expertise in E3 design, analysis, testing, and mitigation . Experience with HERO, HEMP, lightning protection, ESD, RF exposure limits , and operational electromagnetic compatibility. Hands-on experience with EMI/EMC test equipment, including: Spectrum analyzers Oscilloscopes Antennas LISNs Experience using simulation tools such as ANSYS and CST Microwave Studio for EMI/EMC analysis. Strong understanding of PCB layout techniques , including multilayer design, grounding, filtering, and EMI/EMC considerations. Ability to read and interpret electrical schematics. Familiarity with interfaces such as MIPI, DisplayPort, I2C, SPI, PCIe, and USB . Strong analytical, troubleshooting, communication, and organizational skills. Preferred Qualifications Experience supporting aerospace, defense, or other high-reliability electronic systems . Experience leading EMI/EMC compliance activities from design through testing and qualification. Experience with complex embedded electronic systems and mixed-signal PCB designs. Strong understanding of electromagnetic compatibility considerations across system, PCB, and component levels. Active U.S. DoD Secret Security Clearance .

Location: Costa Mesa, United States 📍 Location: Costa Mesa, California, USA 📄 Employment Type: 6-Month Contract 🏢 Work Arrangement: 100% On-site, Monday–Friday 🚀 Start Date: TBD 💰 Compensation: TBD -- based on skills and experience Important Screening Requirements Must be available to work 100% on-site in Costa Mesa, CA, Monday–Friday . Must be eligible to obtain and maintain an active U.S. Secret Security Clearance . Must have 5+ years of hands-on electrical engineering experience designing, testing, and troubleshooting complex PCB/board-level electronics. Strong experience with Altium Designer or an equivalent PCB design platform is required. About the Role We are seeking a hands-on Electrical Engineer – Propulsion / Engine Systems Electronics to support the design, development, integration, and testing of advanced electronics for propulsion and engine systems. This role will own the full PCB development lifecycle, from translating propulsion requirements into electrical designs through schematic capture, PCB layout, component selection, board bring-up, qualification testing, debugging, and system integration. The ideal candidate has strong experience across analog, digital, and power electronics and can develop reliable hardware for demanding vibration and temperature environments. Key Responsibilities PCB Design & Development Own full-cycle development of complex PCB assemblies for propulsion and engine systems. Translate system-level propulsion requirements into robust electrical designs. Perform schematic capture and support high-density PCB layout using Altium Designer or equivalent tools. Select components based on electrical, thermal, reliability, and environmental requirements. Lead board bring-up, debugging, testing, and propulsion-system integration. Ensure PCB designs meet electrical, mechanical, thermal, manufacturing, and reliability requirements. Propulsion & Engine Electronics Design and optimize electronics supporting propulsion and engine systems, including: Flight controller circuits Power distribution systems Power supplies Motor controller circuits Electromagnetic actuator circuits Support integration of electronics with propulsion hardware and associated control systems. Troubleshoot electrical issues identified during engine testing and system integration. Engineering Analysis Perform circuit simulations and detailed engineering analyses. Conduct Worst-Case Analysis (WCA) , thermal analysis, DFMEA, and component derating analysis. Evaluate electrical designs for reliable operation under extreme temperature, vibration, and other demanding environments. Use LTSpice or equivalent tools to validate circuit performance. Verification, Qualification & Testing Lead PCB and electronics bring-up activities. Develop and execute functional, Design Verification Testing (DVT), and qualification testing. Utilize laboratory equipment to troubleshoot and characterize electrical hardware. Perform root-cause and failure analysis supporting engine testing and field operations. Document test results, anomalies, corrective actions, and engineering findings. Cross-Functional Engineering Collaborate with Mechanical, Thermal, Software, Test, Systems, Quality, and Manufacturing Engineering teams. Conduct peer-level and cross-disciplinary design reviews. Provide electrical engineering support throughout development, integration, qualification, and testing. Required Qualifications Bachelor's degree in Electrical Engineering (BSEE) . 5+ years of professional experience designing, testing, and troubleshooting complex board-level electronic systems. Strong fundamentals in: Analog electronics Digital electronics Power electronics Hands-on experience with the complete PCB development lifecycle, including schematic capture, PCB layout, component selection, board bring-up, testing, debugging, and system integration. Deep proficiency with Altium Designer or equivalent schematic capture and PCB layout tools. Experience with LTSpice or equivalent circuit simulation tools. Strong hands-on experience with laboratory equipment, including oscilloscopes, logic analyzers, spectrum analyzers, function generators, DMMs, electronic loads, bench power supplies, thermal chambers, and test automation equipment. Familiarity with CAN, I²C, SPI, and Ethernet communication interfaces. Familiarity with common MCU/CPU architectures. Strong troubleshooting and root-cause analysis skills. Must be eligible to obtain and maintain an active U.S. Secret Security Clearance . Preferred Qualifications Master's degree in Electrical Engineering (MSEE) . Experience with MATLAB and/or Simulink for engineering data analysis, control-loop modeling, and system simulation. Experience designing electronics for propulsion, engine control, aerospace, or other high-reliability systems . Experience developing motor-control or actuator-control electronics . Experience designing power distribution and power conversion electronics. Experience with electronics designed for high-vibration and extreme-temperature environments . Experience supporting hardware qualification, environmental testing, and failure investigations. What We're Looking For We're looking for a hands-on electrical hardware engineer who can own complex electronics from requirements through PCB design, board bring-up, testing, and system integration . The strongest candidates will combine deep PCB design, analog/digital/power electronics, and laboratory troubleshooting experience with the ability to work directly with propulsion, mechanical, software, thermal, manufacturing, and test teams. Experience with Altium, LTSpice, power systems, motor/actuator control, DVT/qualification testing, and root-cause analysis will be especially valuable.

Location: Dubai, United Arab Emirates Mira Construction L.L.C is seeking a skilled and dedicated Electrical Engineer to join our team. The successful candidate will be responsible for designing, implementing, and managing electrical systems in various construction projects, ensuring compliance with relevant codes and standards. The role involves coordinating with multidisciplinary teams, overseeing the electrical aspects of project execution, and ensuring that all electrical installations meet safety and quality requirements. Work format: On-site (Project Office and Construction Site) Key Responsibilities: Design, develop, and review electrical systems including power distribution, lighting, and low voltage systems. Prepare accurate electrical drawings, specifications, and documentation using AutoCAD and Revit. Coordinate with project teams, clients, and subcontractors to ensure seamless project execution. Conduct site inspections, supervise electrical installations, and ensure compliance with safety and quality standards. Identify and resolve technical issues and provide technical support during project implementation. Ensure adherence to UAE regulations and international standards such as IEC, NEC, and BS standards. Support testing and commissioning activities of electrical systems. Maintain project schedules and report on progress related to electrical works. Requirements Bachelor’s degree in Electrical Engineering or related field. Minimum 3-5 years of experience in electrical engineering within construction projects in the UAE. Proficiency in AutoCAD, Revit, and electrical design software. Strong knowledge of electrical codes, standards, and regulations (IEC, NEC, BS, UAE standards). Experience with power distribution, lighting, and low voltage systems design and implementation. Excellent communication, coordination, and problem-solving skills. Ability to work effectively both independently and as part of a multidisciplinary team. Familiarity with construction site practices and project management principles. Relevant professional certification is a plus. Benefits Competitive salary package Visa and medical insurance Opportunity to work on high-quality projects Career growth and development opportunities