Вакансии

Location: Dhahran, Saudi Arabia We are seeking an experienced Instrumentation Engineer to join our Mechanical Services Shops team, responsible for rotating and static equipment repair and component fabrication. The successful candidate will ensure the accuracy, reliability, availability, and lifecycle integrity of instrumentation across industrial machinery and facility systems. The role involves instrument engineering, calibration, troubleshooting, preventive maintenance, commissioning, and continuous improvement of instrumentation and control systems. Key Responsibilities Instrumentation Engineering: Specify, evaluate, and maintain pressure, temperature, flow, level, vibration, speed, position, force, torque, gas, and analytical instruments. Calibration and Metrology: Develop calibration plans, establish tolerances and intervals, maintain traceability, document calibration results, and assess out-of-tolerance conditions. Troubleshooting and Maintenance: Diagnose faults involving sensors, transmitters, wiring, grounding, signal conditioning, I/O systems, instrument loops, networks, alarms, and protection systems. Controls and Commissioning: Prepare instrument datasheets, loop diagrams, hook-ups, cause-and-effect documentation, calibration procedures, FAT/SAT plans, loop checks, and commissioning records. Asset and Change Management: Maintain instrument registers, critical spares, configuration backups, calibration history, obsolescence plans, bypass controls, Management of Change (MOC) records, and contractor quality documentation. Reliability Improvement: Develop preventive-maintenance strategies, investigate recurring failures, implement corrective actions, and ensure compliance with applicable engineering and safety standards. Minimum Requirements Bachelor's degree in Instrumentation, Control Systems, Electrical, Electronics, Automation, or Mechatronics Engineering from a recognized and approved program. Minimum 12 years of industrial instrumentation experience, including at least 7 years maintaining and commissioning instrumentation for manufacturing equipment and facility systems. Strong knowledge of industrial sensors, transmitters, analyzers, vibration and speed probes, control valves, data acquisition, signal standards, grounding, and calibration. Hands-on experience with PLC/DCS I/O, HART or fieldbus devices, loop checking, alarm and trip systems, instrument networks, and OEM machine interfaces. Proven ability to develop calibration and preventive-maintenance plans, troubleshoot recurring failures, and manage instrument configurations. Preferred Qualifications ISA CCST or CAP certification. Vendor-specific DCS/PLC training. Vibration instrumentation training. ISO/IEC 17025 metrology training.

Location: Al Jubail, Saudi Arabia; Dhahran, Saudi Arabia We are seeking an experienced Rotating Equipment Engineer specializing in industrial diesel engines to join the Mechanical Services Shops. The role focuses on diesel-engine overhaul engineering, troubleshooting, diagnostics, performance testing, repair planning, and root cause analysis (RCA) for engines used in oil and gas applications. Key Responsibilities Plan and supervise diesel-engine overhauls, including inspection, repair scope, dimensional checks, and component clearances. Troubleshoot diesel-engine mechanical systems, fuel injection, turbochargers, cooling, lubrication, governors, electronic controls, and protection systems. Ensure proper engine assembly, quality control, timing, torque settings, and compliance with OEM specifications. Conduct dynamometer and load testing to evaluate engine performance, vibration, temperature, pressure, emissions, and fuel consumption. Perform failure analysis and root cause investigations, recommending corrective actions and reliability improvements. Review OEM manuals, technical specifications, test results, and diagnostic data to ensure safe and reliable engine operation. Requirements Education: Bachelor's degree in Mechanical, Automotive, Marine, or Power Engineering from a recognized and approved program. Total Experience: Minimum 15 years of experience in engine or rotating equipment engineering . Relevant Experience: Minimum 8 years of hands-on experience in industrial diesel-engine overhaul, diagnostics, and performance testing . Strong expertise in diesel-engine mechanical systems, fuel injection, turbochargers, cooling, lubrication, governors, controls, and protection systems. Hands-on experience with OEM diagnostic software, borescope inspection, vibration analysis, dynamometer or load-bank testing, and root cause analysis. Ability to interpret OEM manuals, technical specifications, engine test curves, alarm logs, and electronic control data. Preferred Qualifications Relevant OEM diesel-engine training and certifications. Mobius vibration analysis certification. ICML MLA I or equivalent lubrication certification.

Location: Jazan, Saudi Arabia We are seeking an experienced EHSS Trainer who is fluent in Bangla to support safety training and compliance activities for SMP. The successful candidate will develop and deliver EHS training programs, assess training needs, and ensure effective learning and safety awareness among a diverse industrial workforce. Key Responsibilities Develop and deliver EHS training programs for workers, supervisors, and other personnel. Conduct training needs assessments and gap analysis to identify competency requirements. Prepare structured training materials, presentations, and training packages. Administer and maintain training records, attendance, tracking, and reporting through Learning Management Systems (LMS). Ensure compliance with applicable EHS procedures, standards, and organizational requirements. Apply interactive adult-learning techniques to improve training effectiveness and engagement. Coordinate with management and site teams to support training schedules and requirements. Minimum Requirements Fluency in Bangla is mandatory. 10–12 years of experience in EHS training, industrial safety, or compliance, preferably in Oil & Gas, petrochemical, power generation, or heavy industries. At least 3 years of experience in training development and delivery. Diploma in Occupational Health & Safety, Industrial Safety, Engineering, or a related technical discipline. Recognized Train-the-Trainer (TTT) certification. NEBOSH, ASP, CSP, CIH, or an equivalent safety certification is preferred. Hands-on experience with LMS platforms, training administration, and reporting. Strong communication, presentation, facilitation, and computer skills, including MS Word, Excel, and PowerPoint. Preferred Experience Experience delivering EHS training on industrial Oil & Gas projects and communicating effectively with a multicultural workforce is highly desirable.

Location: Riyadh, KSA Workplace: onsite About Tabby Tabby is a GCC based fast-growing financial technology company. We help people shop and pay more easily using flexible payment options like Buy Now, Pay Later. We work with major brands and support millions of customers across the region. We’re a financial company, please note that some of our products charge interest. We’re not your average call centre. We hire people who care about doing a good job, and we give you the tools, support, and rewards to grow. If you’re motivated, professional, and want to be part of a growing company, let's go. Key Responsibilities Support our customers through phone, chat, and email in both English and Arabi Answer questions, solve problems, and make sure customers have a good experience Follow clear guidelines and use tools to help customers quickly and correctly Skills, Qualifications & Requirements What We’re Looking For You speak and write clearly in both Arabic and English (B1+ level or above in English) You’re comfortable with rotational shifts and can work from the office You’re helpful, calm under pressure, quick to learn, and take your work seriously. We don’t want to oversell. This is real customer service work, it can be stressful, especially during busy hours. You need to be ready to handle difficult conversations, follow processes carefully, and have a good & positive attitude even on the tough days. Why Join Tabby? Base salary: 6,635 SAR gross Language allowance: up to 500 SAR gross based on English & Arabic level Performance bonus: up to 10% of your base salary Paid training: 3 weeks in the office Nesting period:3 weeks handling real customers cases while receiving close support

Location: Al Jubail, Saudi Arabia; Dhahran, Saudi Arabia We are seeking a Manufacturing Engineer to join our Mechanical Services Shops. Mechanical Services Shops is responsible for providing rotating and static equipment repair and fabrication of components. Your primary role is to develop and optimize routes for precision components produced through machining, additive, welding, casting, heat treatment, and related processes. You will ensure designs are executable and that operations achieve safety, quality, delivery, cost, and capacity objectives. Key Responsibilities As the successful candidate you will be required to perform the following: · Process Development: Create routings, process plans, work instructions, control plans, inspection points, and production standards for new and repaired components. · Design for Manufacturability: Review drawings and models, identify risks, recommend tolerances and appropriate method, and coordinate technical queries with reverse engineering and quality teams. · Production Planning & Optimization: Balance capacity, sequence operations, define tooling and fixtures, reduce setup and cycle time, and improve throughput, yield, and equipment utilization. · Failure & Root-Cause Analysis: Investigate machining, fabrication, dimensional, material, and assembly failures using structured problem-solving; implement verified corrective and preventive actions. · Industrialization & Governance : Lead fabrication of parts, process validation, material supplier technical reviews, and transfer of qualified methods into repeatable production. Requirements You will hold a Bachelor's degree in Manufacturing, Mechanical, Industrial, Production, or Materials Engineering from a recognized and approved program. You will have at least 15 years of manufacturing-engineering experience, including a minimum of 8 years developing and optimizing industrial production processes for Aerospace or Oil and Gas. Broad knowledge of machining and at least two additional processes such as additive manufacturing, casting, heat treatment, or assembly is required. Proficiency in process planning, tooling and fixture design, CAD/CAM collaboration, capacity analysis, and production-data interpretation is necessary. SME CMfgE, ASQ CQE, Lean Six Sigma Green Belt, or comparable professional certification is preferred. Having simulations certification and all siemens certification for NX CAD/CAM/CAE (NX Teamcenter quality associated Certificate, NX CAD Design Associate Level Certificates, NX CAM Manufacturing Associate Certificate, NX Simcenter 3D CAE Associate Certification, NX Additive Manufacturing Associate Certification, NX Teamcenter quality associate Certificate, NX Designer Certified Professional (NX) Certification) is strongly preferred.

Location: Dhahran, Saudi Arabia We are seeking a Mechatronics Engineer to join our Facility Maintenance team within Mechanical Services Shops. The team is responsible for maintaining facility infrastructure, industrial machinery, and supporting equipment to ensure safe, reliable, and efficient operations. Your primary role will be to ensure the reliability, maintainability, and safe operation of integrated mechanical, electrical, control, robotic, and automated systems across the facility. You will lead troubleshooting, preventive and predictive maintenance, equipment upgrades, and lifecycle management for facility equipment and production machinery. Key Responsibilities Facility & Equipment Maintenance: Develop and implement maintenance strategies for facility equipment, CNC machines, balancing machines, robots, furnaces, test stands, pumps, compressors, conveyors, drives, sensors, and hydraulic and pneumatic systems. Diagnostics & Root Cause Analysis: Troubleshoot mechanical, electrical, servo, PLC, motion-control, hydraulic, pneumatic, and communication faults using drawings, diagnostic software, measurements, and failure evidence. Preventive Maintenance & Reliability: Establish asset criticality, preventive and predictive maintenance tasks, lubrication, alignment, vibration monitoring, thermography, calibration, spare-parts requirements, and condition-monitoring programs. Modifications & Commissioning: Engineer and validate equipment upgrades, safety circuits, drives, sensors, automation changes, and OEM retrofits through controlled design, testing, and change management. Maintenance Planning & Governance: Maintain CMMS records, maintenance plans, procedures, breakdown reports, KPIs, obsolescence plans, contractor controls, technical documentation, and training for maintenance personnel. Facility Safety & Compliance: Ensure maintenance activities comply with applicable safety regulations, operational procedures, equipment standards, and quality requirements. Minimum Requirements Bachelor’s degree in Mechatronics, Mechanical, Electrical, Automation, or Electromechanical Engineering from a recognized and approved program. At least 12 years of industrial or facility maintenance experience , including a minimum of 7 years supporting CNC machines, balancing machines, or integrated mechatronic systems . Strong hands-on knowledge of machine mechanics, bearings, alignment, hydraulics, pneumatics, motors, drives, servos, PLCs, sensors, robots, and safety interlocks. Experience with OEM diagnostic tools, electrical and mechanical drawings, precision measurement, condition monitoring, and structured root cause analysis. Demonstrated ability to develop preventive maintenance plans, manage critical spare parts, execute equipment upgrades, and support safe commissioning. Preferred Qualifications CMRP or CMRT certification. Siemens or Rockwell automation training. Robotics or CNC-machine OEM training. Vibration analysis or thermography credentials.

Location: Jeddah, Saudi Arabia; Riyadh, Saudi Arabia; Tabuk, Saudi Arabia The QA/QC Manager will oversee and ensure the quality of housing renovation and refurbishment works performed by contractors and subcontractors. The role is responsible for ensuring compliance with approved drawings, project specifications, contractual requirements, applicable codes, and the Project Quality Plan, from initial site inspections through final handover. Key Responsibilities Develop and implement the Project Quality Plan, procedures, and inspection requirements. Lead and supervise multidisciplinary Civil, Architectural, Electrical, and Mechanical QA/QC teams. Review method statements, Inspection and Test Plans (ITPs), material submittals, and quality documentation. Monitor renovation activities, including demolition, structural repairs, waterproofing, finishes, MEP works, and reinstatement. Coordinate inspections, material approvals, testing, and commissioning with the client and consultant. Identify quality issues, manage Non-Conformance Reports (NCRs), and ensure corrective actions are completed. Conduct site inspections and quality audits to ensure compliance with approved standards. Manage snagging, final inspections, as-built drawings, O&M manuals, and project handover documentation. Monitor contractor and subcontractor performance and prepare periodic quality reports and KPIs. Requirements Bachelor’s degree in Civil, Architectural, Electrical, or Mechanical Engineering. Minimum 10 years of QA/QC experience in construction and building projects. Minimum 5 years of experience in a management position. Proven experience in housing renovation, residential refurbishment, or building rehabilitation projects. Strong knowledge of ISO 9001, quality management systems, inspections, NCR management, testing and commissioning, and handover processes. Experience managing contractors, subcontractors, consultants, and multidisciplinary quality teams. Strong communication, leadership, reporting, and problem-solving skills. ISO 9001 Lead Auditor certification preferred. PMP, RMP, and Six Sigma certifications preferred. Registration with the relevant local engineering authority, where required.

Location: Dhahran, Saudi Arabia We are seeking a Valve Repair Specialist to join our Mechanical Services Shops. Mechanical Services Shops is responsible for providing rotating and static equipment repair and fabrication of components. Your primary role is to provide technical and on-hand support for inspection, repair, reconditioning, testing, and performance improvement of industrial valves. You will determine repair strategy, resolve complex leakage or operability problems, approve procedures, and ensure repaired valves meet standard, service, and reliability requirements. Key Responsibilities As the successful candidate you will be required to perform the following: · Repair Strategy: Review valve type, service, damage, pressure class, materials, trim, actuator, and code requirements to establish inspection, repair, replacement, upgrade, and test scope. · Complex Troubleshooting: Diagnose seat leakage, packing leakage, galling, erosion, cavitation, corrosion, distortion, stem or guide problems, actuator issues, and recurring functional failures. · Procedure Development: Approve disassembly, dimensional inspection, machining, lapping, welding, heat-treatment, assembly, torque, setting, and acceptance criteria. · Testing & Certification: Define shell, seat, backseat, closure, fugitive-emission, torque, stroke, and functional tests; review calibrated data and certify results against applicable standards. · Technical Governance: Control deviations and material substitutions, support RCAs, standardize repair practices, mentor personnel, and recommend design or service improvements. Minimum requirements ·        You will hold a Bachelor's degree in Mechanical, Materials, Metallurgical, or Manufacturing Engineering from a recognized and approved program. ·        You will have at least 15 years of valve, pressure-equipment, or mechanical-repair experience, including a minimum of 10 years in complex industrial valve repair and testing. ·        Expertise across gate, globe, check, ball, butterfly, and other applicable valve types such as safety relief valves is required. Moreover, expertise in trim designs, packing systems, actuators, and pressure classes is required. ·        Strong knowledge of valve metallurgy, hard-facing, machining, lapping, welding repair, dimensional inspection, pressure testing, and leakage diagnosis is necessary. ·        Demonstrated ability to develop repair procedures, troubleshoot repeat failures, assess deviations, and optimize valve performance is required. ·        API valve training and recognized OEM repair, actuator, or diagnostic training are strongly preferred.

Location: Toronto, Canada; New York, United States; Melbourne, Australia; Baku, Azerbaijan; Cairo, Egypt; Dammam, Saudi Arabia Eram Talent is hiring on behalf of its leading Oil & Gas client for multiple professional opportunities across Drilling & Rig Operations, Seismology, Geological Support, Potential Field Services, Technical Support, and Engineering Documentation. The client is seeking qualified and experienced professionals to support drilling operations, rig-site activities, field assignments, geoscientific investigations, technical functions, and engineering project support. Successful candidates will contribute to safe and efficient operations, accurate technical documentation, effective field support, and the achievement of project objectives. Opportunities are available across various experience levels, including operational, technical, specialist, and support roles. Candidates with relevant qualifications and experience are encouraged to apply for the position that best matches their background. Requirements 1. Drilling & Rig Operations Derrickman – Assist with rig-floor operations, handling tubulars and drilling equipment, routine maintenance, and safe execution of drilling activities. Rig Clerk – Provide administrative and clerical support at rig sites, maintaining records, correspondence, employee timekeeping, and site documentation. UR Support Assistant – Support office and field operations through document handling, recordkeeping, equipment and material coordination, and transportation between offices and rig sites. Forklift Operator – Operate forklifts safely to load, unload, transport, stack, and manage drilling materials and equipment in warehouse and site environments. HSE Coordinator – Coordinate health, safety, and environmental activities, including inspections, audits, incident investigations, safety training, risk management, and regulatory compliance. 2. Seismology Seismologist – All Levels (I, II & III) – Monitor seismic survey operations, equipment testing, geophysical data quality, survey positioning, VSP and uphole surveys, and field safety and compliance. Minimum direct experience: 2 years (Level I), 3 years (Level II), and 5 years (Level III). 3. Geological Support Geological Assistant Technician – All Levels (I, II & III) – Support geological field activities through terrain verification, core handling, sample organisation, and proper storage and archiving. Minimum direct experience: 2 years (Level I), 3 years (Level II), and 5 years (Level III). 4. Potential Field Specialists Potential Field Specialist – All Levels (I, II & III) – Support geophysical survey operations through equipment testing, potential-field data quality control, field data processing, sample handling, and verification of survey deliverables. Minimum direct experience: 2 years (Level I), 3 years (Level II), and 5 years (Level III). 5. Technical & Engineering Support Technical Specialist – All Levels (I, II & III) – Perform specialist geophysical technical services, including equipment acceptance checks, survey and data quality control, compliance monitoring, and verification of technical deliverables. Minimum direct experience: 2 years (Level I), 3 years (Level II), and 5 years (Level III). Engineering Support Assistant – Provide engineering project support through technical documentation, drawing and report management, material and equipment listings, data reconciliation, and coordination with engineering and planning teams.

Location: Jeddah, Makkah Region, Saudi Arabia SMS Data Collection Participant - Arabic (Saudi Arabia) Rate: $1.50 USD per qualified message Location: Remote: Participants must be based in Saudi Arabia Schedule: Flexible Project type: Short-term/project-based Device requirement(s): You must use your own mobile phone and Saudi Arabia phone number The Project Productive Playhouse is seeking Arabic-speaking participants for a mobile messaging data collection project. Participants will submit authentic scam and spam SMS messages received on their personal mobile phones to help improve technology designed to identify fraudulent and unwanted communications. This is a flexible, remote opportunity. Participants may submit eligible messages whenever they receive them, provided all submissions meet project requirements.. Your contributions will support the development of tools designed to make mobile messaging safer for users around the world. Why Participate? Earn $1.50 USD for each qualified message you submit Participate remotely on a flexible schedule Help improve scam-detection technology by showing how real messages appear in Arabic . Duties Submit authentic SMS messages that meet project guidelines Identify each message as either Scam or Spam Categorize submissions according to the appropriate message type Ensure all submissions are complete, accurate, and meet quality standards Follow all project instructions and submission requirements Please note: Messages collected from email or other platforms are not eligible. Submissions must be SMS messages received directly on your mobile phone. Only submissions that meet requirements will be eligible for payment Project Requirements You may be a good fit if you: Are a native or expert-level fluency in Arabic , as spoken in Saudi Arabia Currently located in Saudi Arabia Have access to your own mobile device You must have access to your own Saudi Arabia phone number Can follow project guidelines and quality standards Why PPH? Your language skills are the whole point — and this project pays for them Apply once, get contacted directly when a spot opens — no chasing Work from anywhere, on your own schedule, alongside any other work you do Clear task specs, no ongoing oversight, no micromanagement Real project experience with a global data and language services company Work that actually improves how AI understands your language About Productive Playhouse We started by teaching kids through award-winning programming. We grew into a global data and language services company trusted by clients worldwide. But the mission never changed: keep language alive. Transcription, translation, localization, linguistic analysis, AI evaluation — it all comes back to preserving languages and the cultures they carry. All engagements are contingent upon successful completion of identity verification. Productive Playhouse is an equal opportunity organization headquartered in California and committed to diversity and inclusion across our global workforce. We welcome applicants of all backgrounds and abilities, regardless of location or engagement type. For accommodations or inquiries, please contact HR.

Location: Riyadh, Riyadh Region, Saudi Arabia SMS Data Collection Participant - Arabic (Saudi Arabia) Rate: $1.50 USD per qualified message Location: Remote: Participants must be based in Saudi Arabia Schedule: Flexible Project type: Short-term/project-based Device requirement(s): You must use your own mobile phone and Saudi Arabia phone number The Project Productive Playhouse is seeking Arabic-speaking participants for a mobile messaging data collection project. Participants will submit authentic scam and spam SMS messages received on their personal mobile phones to help improve technology designed to identify fraudulent and unwanted communications. This is a flexible, remote opportunity. Participants may submit eligible messages whenever they receive them, provided all submissions meet project requirements.. Your contributions will support the development of tools designed to make mobile messaging safer for users around the world. Why Participate? Earn $1.50 USD for each qualified message you submit Participate remotely on a flexible schedule Help improve scam-detection technology by showing how real messages appear in Arabic . Duties Submit authentic SMS messages that meet project guidelines Identify each message as either Scam or Spam Categorize submissions according to the appropriate message type Ensure all submissions are complete, accurate, and meet quality standards Follow all project instructions and submission requirements Please note: Messages collected from email or other platforms are not eligible. Submissions must be SMS messages received directly on your mobile phone. Only submissions that meet requirements will be eligible for payment Project Requirements You may be a good fit if you: Are a native or expert-level fluency in Arabic , as spoken in Saudi Arabia Currently located in Saudi Arabia Have access to your own mobile device You must have access to your own Saudi Arabia phone number Can follow project guidelines and quality standards Why PPH? Your language skills are the whole point — and this project pays for them Apply once, get contacted directly when a spot opens — no chasing Work from anywhere, on your own schedule, alongside any other work you do Clear task specs, no ongoing oversight, no micromanagement Real project experience with a global data and language services company Work that actually improves how AI understands your language About Productive Playhouse We started by teaching kids through award-winning programming. We grew into a global data and language services company trusted by clients worldwide. But the mission never changed: keep language alive. Transcription, translation, localization, linguistic analysis, AI evaluation — it all comes back to preserving languages and the cultures they carry. All engagements are contingent upon successful completion of identity verification. Productive Playhouse is an equal opportunity organization headquartered in California and committed to diversity and inclusion across our global workforce. We welcome applicants of all backgrounds and abilities, regardless of location or engagement type. For accommodations or inquiries, please contact HR.

Location: Saudi Arabia Our client is a fast-growing FMCG coffee business with products sold across more than 45 markets worldwide, including a growing footprint in Saudi Arabia. The company is now investing in Saudi Arabia and is building out the team and route-to-market for both its B2C and B2B coffee business in the region. Our client is looking for a senior, well-connected coffee and FMCG sales professional to lead the development of its Saudi Arabian market, with primary focus on B2C and additional support on B2B activity. This is a hands-on, market-building role for someone who can advise the company on how to enter and grow in Saudi Arabia and the wider region – including identifying and securing the right distributors – and who is comfortable operating with a high degree of autonomy in a market where the company does not yet have a local office. Key Responsibilities •        Develop and execute the go-to-market strategy for the company’s B2C coffee business across Saudi Arabia. •        Identify, evaluate and onboard key distributors and channel partners in Saudi Arabia and the wider region. •        Provide hands-on advisory support to the company leadership on market entry, route-to-market and commercial structure for the region. •        Support and contribute to B2B sales activity alongside the core B2C focus. •        Build and manage relationships with retailers, distributors and trade partners across the coffee and broader FMCG landscape. •        Travel periodically to engage with the company’s existing business and sales teams, share market learnings and help guide the development of the Saudi Arabia business. •        Act as a trusted, on-the-ground advisor as the company scales its presence in the region, with the expectation of building and managing a team as the business grows. Requirements •        At least 10 years of experience in the coffee industry and/or broader FMCG sales and marketing, with strong B2C focus. •        Deep, well-established network within the coffee industry in Saudi Arabia – able to advise on key distributors and the right way to enter the market. •        Proven sales and relationship-building track record; able to open doors and close deals. •        Previous experience managing a team is preferred, given this role is expected to grow into a people-management position. •        Comfortable working independently/remotely without a local office infrastructure, while staying connected to a small regional team. •        Fluent English speaker. •        Honest, hard-working, relationship-driven, and willing to travel as needed. •        Local Saudi Arabian candidates strongly preferred but not essential. •  No specific educational background required – industry experience and network matter most.

Location: Thuwal, Saudi Arabia The Site Manager represents the Client on-site and oversees renovation activities to ensure safe, timely, and quality delivery in accordance with approved drawings, specifications, project requirements, and HSE standards. The role coordinates contractors and multidisciplinary stakeholders, monitors project progress, resolves site issues, and ensures the successful completion and handover of renovated housing units. Key Responsibilities Act as the Client’s primary representative at the project site and coordinate with the PMC, contractors, designers, operations, and end users. Monitor renovation progress, contractor performance, schedules, resources, and site constraints. Coordinate civil, architectural, electrical, mechanical, and other construction activities. Ensure compliance with approved drawings, specifications, method statements, quality standards, and HSE requirements. Identify and resolve technical issues, risks, delays, and site coordination challenges. Lead site coordination meetings, track action items, and review contractor progress reports. Coordinate inspections, snagging, testing and commissioning, defect closure, and final handover. Liaise with operations and facilities management to confirm housing unit readiness. Provide regular management reports on progress, risks, delays, and required decisions. Qualifications and Experience Bachelor’s degree in Civil Engineering, Architecture, Construction Management, or a related discipline. Minimum 10 years of construction and site-management experience. Proven experience in housing renovation, residential refurbishment, or building construction. Experience managing multidisciplinary contractors and coordinating site activities. Strong knowledge of health, safety, environmental, and quality requirements. Project or construction management certification preferred; relevant professional registration where required. Key Competencies Site leadership and stakeholder management. Construction planning, coordination, and problem-solving. Quality assurance and HSE compliance. Reporting, communication, and decision-making.

Location: Jakarta, Indonesia; Kuala Lumpur, Malaysia Eram Talent, a division of Eram Group, provides human resources, industrial projects, and maintenance services solutions across a wide range of sectors, including oil and gas, petrochemicals, power, infrastructure, water, mining, healthcare, and IT. With a strong presence across complex industrial environments, the company supports clients with specialized expertise that helps keep critical operations safe, reliable, and efficient. This role focuses on providing process-engineering support to the power generation block, with an emphasis on equipment performance, thermodynamic analysis, operational troubleshooting, and plant optimization. You will contribute to the safe and efficient operation of utility systems by working closely with operations and technical teams to evaluate performance trends, investigate deviations, and support improvement initiatives across key power-generation assets. If selected, the work location would be onsite at Saudi Arabia. Responsibilities Monitor and evaluate Power Generation Block equipment performance daily using process data analysis, efficiency calculations, heat-rate assessments, KPI tracking, and dashboard updates. Perform engineering calculations, thermodynamic assessments, equipment evaluations, and technical studies to identify efficiency losses and improvement opportunities. Assess heat exchangers, steam-turbine-generator condensers, HRSGs, and cooling systems for heat transfer, fouling, and thermal efficiency. Support diagnostic programs for gas and steam turbines, review monthly performance reports, coordinate with OEMs, and develop corrective actions. Investigate process deviations, operational upsets, efficiency losses, and equipment performance issues. Provide daily process-engineering support to Operations, recommend corrective actions, optimize operating parameters, and review SOPs and EOPs. Support mechanical integrity programs and evaluate process impacts on equipment health. Conduct feasibility and improvement studies covering plant efficiency, reliability, steam-cycle performance, water consumption, and emissions. Support plant modifications, MOC activities, design notices, risk assessments, root-cause analyses, and commissioning. Prepare technical reports, performance summaries, recommendations, operating guidelines, and unit trip reports within 24 hours of an upset. Requirements Strong understanding of IGCC power-generation processes, P&IDs, PFDs, and H&MBs, including syngas-fired gas turbines, HRSGs, steam turbines, steam-cycle systems, and power-block interfaces with gasification complexes. Advanced understanding of power-block equipment and steam-cycle systems, with the ability to evaluate equipment performance, heat rate, efficiency, and thermal losses using sound engineering principles and performance-analysis techniques. Ability to perform heat-and-mass balance calculations, energy accounting, process-performance evaluations, troubleshooting, root-cause analysis, and performance-gap investigations. Knowledge of mechanical integrity, asset management, process safety, Management of Change, HAZOP methodology, risk assessment, environmental compliance requirements, and plant operating procedures. Proficiency with process simulation, thermodynamic modeling, and performance-analysis tools such as Aspen Plus, Aspen Plus Dynamics, Aspen HYSYS, GateCycle, or equivalent. Strong capability in process-data analysis using DCS, PI Historian, and performance-monitoring systems to evaluate plant performance and identify operational deviations. At least 7 years of relevant experience in power generation plants, combined-cycle systems, steam systems, boilers, turbines, power distribution, or energy efficiency. Bachelor’s degree in Mechanical Engineering, Process Engineering, or a related field. Experience in petrochemical, refining, gas processing, chemical manufacturing, gasification, fertilizer, power generation, or large industrial utility operations. Professional proficiency in English and effective communication skills for technical reporting and team collaboration. A PE certificate is a plus.

Location: Jakarta, Indonesia; Kuala Lumpur, Malaysia Eram Talent, an ISO 9001:2015-certified division of Eram Group, provides human resources, industrial projects, and maintenance services solutions across the oil and energy sector and related industries. The company supports complex operational environments where technical expertise, safety, and performance improvement are central to long-term success. This opportunity is suited to a process engineer who can help improve plant performance across gas processing and related industrial operations. In this role, you will contribute to optimization, reliability, and safe operations by working closely with multidisciplinary teams and translating technical analysis into practical improvements for the plant. If selected, the job location would be onsite at Saudi Arabia Responsibilities Analyze existing plant processes and identify improvements that enhance efficiency, quality, productivity, energy use, and waste reduction. Design, execute, and analyze plant performance tests; evaluate performance data; and provide actionable optimization recommendations. Collect and analyze process data to identify trends and deviations, and prepare technical reports and presentations for management and stakeholders. Troubleshoot operational issues, determine root causes, implement corrective actions, and support operations and maintenance teams with complex process-related problems. Apply process improvement methodologies such as Lean and Six Sigma, refine standard operating procedures, and promote process consistency. Collaborate with operations, maintenance, engineering, commissioning, and safety teams to ensure safe and efficient operations. Train plant personnel on process improvements and best practices. Ensure compliance with safety, environmental, and regulatory standards, and participate in risk assessments, process hazard analyses, and safety audits. Lead or support process improvement projects and coordinate timely execution across departments. Monitor and maintain process control systems for stability and efficiency. Requirements Bachelor’s degree or higher in Chemical Engineering with a minimum of 7+ years of relevant process engineering experience. Relevant plant or process experience in SARU (Soot Ash Recovery Unit), SRU (Sulphur Recovery Unit), AGR (Acid Gas Removal Unit), HRU (Hydrogen Recovery Unit), gasification units, gas processing, sulfur recovery, hydrogen recovery, and refining or petrochemical facilities. Strong understanding of plant operations, process optimization, and performance testing. Familiarity with laboratory equipment and analytical techniques, including chromatographs, spectrometers, and other analytical instruments. Knowledge of process safety management, risk assessment methods, EHS regulations, P&ID interpretation, and process documentation. Expertise in troubleshooting and diagnosing operational issues in plant systems and equipment. Experience with process control, automation systems, and advanced process control strategies. Ability to use Aspen HYSYS and process simulation tools. Proficiency in spoken and written English, including the ability to prepare clear technical reports and presentations.

Location: Kuala Lumpur, Malaysia; Jakarta, Indonesia Eram Talent, an ISO 9001:2015-certified division of Eram Group, provides human resources, industrial projects, and maintenance services solutions across the oil and energy sector and related industries. The company supports complex operational environments where technical expertise, safety, and performance improvement are central to long-term success. This opportunity is suited to a process engineer who can help improve plant performance across gas processing and related industrial operations. In this role, you will contribute to optimization, reliability, and safe operations by working closely with multidisciplinary teams and translating technical analysis into practical improvements for the plant. If selected, the job location would be onsite at Saudi Arabia Responsibilities Analyze existing plant processes and identify improvements that enhance efficiency, quality, productivity, energy use, and waste reduction. Design, execute, and analyze plant performance tests; evaluate performance data; and provide actionable optimization recommendations. Collect and analyze process data to identify trends and deviations, and prepare technical reports and presentations for management and stakeholders. Troubleshoot operational issues, determine root causes, implement corrective actions, and support operations and maintenance teams with complex process-related problems. Apply process improvement methodologies such as Lean and Six Sigma, refine standard operating procedures, and promote process consistency. Collaborate with operations, maintenance, engineering, commissioning, and safety teams to ensure safe and efficient operations. Train plant personnel on process improvements and best practices. Ensure compliance with safety, environmental, and regulatory standards, and participate in risk assessments, process hazard analyses, and safety audits. Lead or support process improvement projects and coordinate timely execution across departments. Monitor and maintain process control systems for stability and efficiency. Requirements Bachelor’s degree or higher in Chemical Engineering with a minimum of 7+ years of relevant process engineering experience. Relevant plant or process experience in SARU (Soot Ash Recovery Unit), SRU (Sulphur Recovery Unit), AGR (Acid Gas Removal Unit), HRU (Hydrogen Recovery Unit), gasification units, gas processing, sulfur recovery, hydrogen recovery, and refining or petrochemical facilities. Strong understanding of plant operations, process optimization, and performance testing. Familiarity with laboratory equipment and analytical techniques, including chromatographs, spectrometers, and other analytical instruments. Knowledge of process safety management, risk assessment methods, EHS regulations, P&ID interpretation, and process documentation. Expertise in troubleshooting and diagnosing operational issues in plant systems and equipment. Experience with process control, automation systems, and advanced process control strategies. Ability to use Aspen HYSYS and process simulation tools. Proficiency in spoken and written English, including the ability to prepare clear technical reports and presentations.

Location: Jakarta, Indonesia; Kuala Lumpur, Malaysia Eram Talent, an ISO 9001:2015-certified division of Eram Group, delivers human resources, industrial projects, and maintenance services across a broad range of sectors, including oil and gas, petrochemicals, power, infrastructure, water, mining, healthcare, and IT. Within the oil and energy space, the company supports complex industrial operations with practical engineering expertise and a strong focus on quality, safety, and project delivery. This role offers the opportunity to contribute to technically demanding energy projects where strong process engineering judgment can make a measurable impact. As a Process Design Engineer, you will support the development and improvement of plant systems, working across engineering disciplines to help shape efficient, safe, and reliable process solutions for industrial facilities. If selected, the work location would be onsite at Saudi Arabia . Responsibilities Develop process designs, simulations, and engineering studies for energy projects. Deliver FEED and detailed engineering packages for plant modifications. Lead HAZOP reviews and ensure compliance with safety requirements. Identify debottlenecking opportunities across brownfield and greenfield facilities. Coordinate multidisciplinary teams throughout project planning and execution. Requirements Required Qualifications Bachelor’s degree in Chemical Engineering, Process Engineering, or a related field. 7+ years of experience in process engineering or plant operations, including hands-on work in process design and process simulation. Experience leading or participating in HAZOP reviews and delivering FEED and detailed engineering packages. Track record of identifying or executing debottlenecking initiatives across brownfield and greenfield projects. Proficiency with data analysis and process simulation software such as Aspen Plus and HYSYS. Strong knowledge of gasification processes, power production, and related technologies, along with safety and environmental regulations such as OSHA and EPA standards. Experience with process optimization methodologies, including Six Sigma and lean manufacturing. Experience managing projects across planning, budgeting, and execution. Experience leading multidisciplinary teams, preparing engineering reports, and coordinating effectively with cross-functional stakeholders. Preferred Qualifications Master’s degree in Engineering or Management. Experience in industries such as petrochemical, refining, gas processing, chemical manufacturing, gasification facilities, fertilizer plants, power generation plants, or large industrial utility operations. Holding a Six Sigma, Lean Manufacturing, or PMP certification.

Location: Jeddah, Saudi Arabia; Riyadh, Saudi Arabia; Tabuk, Saudi Arabia We are looking for a Community & Startups Coordinator to support founders and startups participating in an accelerator program. The role involves founder engagement, community building, event coordination, and ensuring a smooth and positive experience throughout the program. Key Responsibilities Coordinate founder onboarding, communications, and ongoing support. Build strong relationships with founders and startup communities. Organize community activities, workshops, meetups, and networking events. Coordinate event logistics, including venues, registrations, catering, and transportation. Maintain startup records, CRM data, attendance, and engagement reports. Collect feedback and support continuous improvement of the accelerator program. Collaborate with Operations, Marketing, and Events teams. Requirements Bachelor’s degree in Business Administration, Entrepreneurship, Marketing, Communications, or a related field. Minimum 2 years of experience in community management, startup programs, accelerator operations, or event coordination. Experience in event planning, logistics, and stakeholder coordination. Strong interpersonal, communication, and organizational skills. Passion for startups, entrepreneurship, and innovation. Proficiency in Microsoft Office and CRM/project management tools. Fluency in both English and Arabic is required.