Вакансии

от 15 лет опыта в downstream/refining, практический опыт управления эксплуатацией НПЗ и установками первичной переработки нефти. Обязательно свободное владение русским и английским языками.

Задачи: — Управление круглосуточной эксплуатацией установок первичной переработки нефти на нефтеперерабатывающем заводе. — Координация функций Production, Technical и Maintenance. — Участие в запуске, стабилизации и оптимизации производства. Требования: — Опыт работы в downstream/refining не менее 15 лет, включая переработку сырой нефти и производство бензина, дизеля, нафты, керосина, мазута. — Практический опыт управления эксплуатацией НПЗ. — Свободное владение русским и английским языками для деловой коммуникации. — Готовность к релокации и работе в ротационном формате в Западной Африке на 12 месяцев с возможностью продления. — Позиция предназначена исключительно для специалистов с опытом в downstream/refining. Условия: — Релокационная поддержка, проживание, перелёты, страховка. — Ротационный график работы. — Отпуск домой 2-3 раза в год. — Условия и компенсация обсуждаются индивидуально.

Location: Johannesburg, South Africa; Moscow, Russia; Baku, Azerbaijan; Astana, Kazakhstan As a successful candidate you will be required to perform the following: Maintain full Safety Compliance with the Saudi Aramco Applicable Safety & Environmental requirements including SAEP, SAES, GIs and other applicable government regulations. Implement waste management plans for hazardous, non-hazardous, and special wastes including the waste minimization, segregation, storage, transport, and disposal activities with contractors and vendors. Conduct E&OH field audits and inspections as required. Organize and review air emissions monitoring, wastewater sampling, soil assessments and report any non-compliances and ensure corrective actions are tracked and closed in a timely manner. Lead initial environmental spill response coordination, reporting, and root cause analysis, and maintain site-specific Spill Prevention, Control. Conduct regular facility safety inspections and audits, including contractor facilities, and Track corrective action close-outs in environmental tracking systems. Develop and promote a culture of proactive environmental management, and Deliver environmental inductions, toolbox talks, and awareness campaigns for employees and contractors. Prepare monthly and quarterly environmental performance reports, and maintain and update the site’s Environmental Management System (EMS) in compliance with ISO 14001 Requirements Bachelor degree in, Engineering, HSE, Science, Industrial, or in a related discipline from an accredited entity or equivalent. A Master’s Degree or PhD is preferable. Minimum of 10-15 years of experience related to Environmental operations, Oil & Gas industry with minimum of 7 years in Oil & Gas. Certifications (preferred) such as ISO 14001:2015 Lead Auditor, and NEBOSH Environmental Certificate, and Hazardous Waste Management Certification (e.g., RC Hazardous Waste Permit Awareness). Strong knowledge of Environmental Management Systems (EMS) principles. Environmental management certification. Legal and regulatory knowledge concerning Environmental. A good eye for Environmental and the ability to pay attention to details. A comprehensive understanding of the Environmental Impact Assessments. Skills in training and motivating colleagues. Familiarity with the time reporting system. Strong knowledge of project control. Excellent interpersonal and communication skills. Capacity to identify situations requiring improvement in Environment. Excellent leadership skills and multitasking abilities.

-руководство производственной и технической эксплуатацией НПЗ; повышение надёжности, стабильности и эффективности производства;

Ключевые требования: — свободное владение английским и русским языками (устно и письменно), включая техническую терминологию refinery — высшее инженерное образование (химическое, процессное, механическое или нефтегазовое) — 10–20 лет опыта в управлении производством НПЗ, refinery operations или plant operations — глубокая экспертиза в технологических процессах НПЗ, оборудовании и технических системах — опыт поддержки проектов по модернизации, расширению и оптимизации мощностей НПЗ — практика в commissioning, запуске, troubleshooting и операционной оптимизации — лидерский опыт: управление техническими и производственными командами, развитие компетенций, наставничество. О роли: Chief Plant Manager будет отвечать за всё производство и техническую эффективность НПЗ: безопасная, стабильная и надёжная работа, оптимизация процессов, координация с maintenance/HSE/procurement, техническое лидерство и развитие локальной команды. Ключевая задача — вывести refinery на полную производственную мощность через техническую оценку, планирование и исполнение upgrade-проектов, а также подготовить местных специалистов к будущим лидерским ролям. Условия: — Full-time, site-based позиция с экспат-ротацией и плановыми периодами home leave — Контракт: 12 месяцев (с продлением, по результатам KPI и операционным потребностям)

Location: Riyadh, Saudi Arabia We are seeking an experienced Plant Tissue Culture Technician responsible for the laboratory-based propagation of rare, endangered, difficult-to-propagate, and high-value plant species using tissue culture and micropropagation techniques . The role will support living plant collections, plant conservation programmes, and specialised in-vitro propagation activities. The successful candidate will establish and maintain sterile laboratory conditions, prepare culture media, initiate and maintain plant cultures, monitor plant development, and support the acclimatisation of tissue-cultured plants. Key Responsibilities Propagate rare, endangered, difficult-to-propagate, and high-value plant species using tissue culture and micropropagation techniques. Initiate, establish, multiply, root, and maintain in-vitro plant cultures according to species-specific protocols. Select and prepare suitable explant material for tissue culture initiation. Perform surface sterilisation and maintain strict aseptic techniques to minimise contamination. Prepare and modify plant tissue culture media, including nutrients, vitamins, plant growth regulators, carbohydrates, and gelling agents. Monitor cultures for growth, development, contamination, physiological abnormalities, and overall performance. Conduct routine subculturing and transfer plant material under sterile conditions. Maintain appropriate temperature, photoperiod, light intensity, and other environmental conditions for tissue cultures. Operate, clean, sterilise, and maintain laboratory equipment including autoclaves, laminar-flow cabinets, growth chambers, balances, pH meters, and microscopes . Monitor equipment performance and coordinate maintenance and calibration requirements. Implement laboratory cleaning, sterilisation, contamination-control, and waste-management procedures. Identify sources of microbial contamination and implement corrective and preventive measures. Support the transfer and acclimatisation of tissue-cultured plants from in-vitro to ex-vitro conditions. Develop, refine, document, and standardise tissue culture protocols for priority plant species. Maintain detailed records covering explant sources, media formulations, culture dates, subcultures, treatments, contamination rates, multiplication rates, rooting success, and plant survival. Maintain laboratory inventories of culture media components, consumables, chemicals, glassware, and sterile materials. Support plant conservation and recovery programmes for endangered, threatened, rare, and difficult-to-propagate species. Assist with research and trials aimed at improving propagation success. Provide practical training and technical guidance to staff, interns, and students. Ensure laboratory activities comply with applicable health, safety, chemical handling, biological material, biosecurity, and laboratory operating requirements. Requirements Degree in Biology, Plant Biology, Botany, Biotechnology, Plant Sciences, Horticulture , or a related field. Formal training in plant tissue culture, micropropagation, plant biotechnology , or related laboratory techniques is preferred. Minimum 5+ years of relevant laboratory experience involving plant tissue culture and micropropagation. Demonstrated practical experience in culture initiation, multiplication, subculturing, rooting, and culture maintenance . Experience propagating rare, endangered, difficult-to-propagate, or high-value plant species is highly desirable. Strong practical experience in explant selection, preparation, surface sterilisation, and aseptic handling . Demonstrated experience preparing and modifying plant tissue culture media and working with plant growth regulators . Extensive experience maintaining sterile laboratory conditions and controlling contamination. Hands-on experience operating autoclaves, laminar-flow cabinets, growth chambers, pH meters, balances, microscopes , and related laboratory equipment. Experience identifying and troubleshooting contamination, culture decline, abnormal growth, poor multiplication, and rooting problems. Experience monitoring environmental conditions for in-vitro cultures. Experience with hardening and acclimatisation of tissue-cultured plants to greenhouse or nursery environments. Experience developing, testing, refining, or documenting species-specific micropropagation protocols. Strong laboratory record-keeping, data-management, inventory-management, and technical documentation skills. Experience supporting plant conservation, ex-situ conservation, or endangered species propagation projects is preferred. Ability to collaborate effectively with botanists, horticulturists, researchers, conservation specialists, and academic institutions . Demonstrated ability to train staff, interns, students, or laboratory personnel in tissue culture techniques. Strong troubleshooting, analytical, observational, and problem-solving skills. Strong attention to detail and ability to perform laboratory procedures consistently and precisely. Previous experience in a botanic garden, plant tissue culture laboratory, research institution, university, conservation facility, commercial micropropagation laboratory, or comparable plant-science environment is preferred

Location: Riyadh, Saudi Arabia The Plant Propagator is responsible for the propagation, establishment, and management of plant material required to support the Botanic Gardens’ living collections, displays, conservation programmes, and horticulture operations. The role applies a range of propagation methods, including seeds, cuttings, grafting, division, and other vegetative techniques, to produce healthy and genetically appropriate plant stock. The Plant Propagator will manage nursery areas and propagation stock, develop and refine propagation protocols for rare, endangered, and difficult-to-propagate species, and monitor plants through the different stages of establishment. The role will maintain detailed propagation records and evaluate success rates to continuously improve propagation techniques and support the long-term sustainability and conservation value of the Botanic Gardens' plant collections. Scope of Work Propagate plants using a range of techniques, including seeds, cuttings, grafting, budding, layering, division, and other appropriate vegetative propagation methods. Select appropriate propagation techniques according to species characteristics, seasonal requirements, plant condition, and collection objectives. Collect, prepare, process, and appropriately store seeds and vegetative propagation material. Assess the quality and viability of propagation material prior to use. Prepare appropriate propagation media and containers according to species-specific requirements. Apply appropriate seed treatments, including scarification, stratification, soaking, or other pre-germination treatments where required. Prepare and treat cuttings and other vegetative material to promote successful rooting and establishment. Undertake grafting, budding, division, and other specialist propagation activities where appropriate. Monitor germination, rooting, establishment, growth, and overall plant health throughout the propagation process. Propagate plants using a range of techniques, including seeds, cuttings, grafting, budding, layering, division, and other appropriate vegetative propagation methods. Select appropriate propagation techniques according to species characteristics, seasonal requirements, plant condition, and collection objectives. Collect, prepare, process, and appropriately store seeds and vegetative propagation material. Assess the quality and viability of propagation material prior to use. Prepare appropriate propagation media and containers according to species-specific requirements. Apply appropriate seed treatments, including scarification, stratification, soaking, or other pre-germination treatments where required. Prepare and treat cuttings and other vegetative material to promote successful rooting and establishment. Undertake grafting, budding, division, and other specialist propagation activities where appropriate. Monitor germination, rooting, establishment, growth, and overall plant health throughout the propagation process. Identify and address propagation problems, including poor germination, rooting failure, disease, pest infestation, nutrient deficiencies, and environmental stress. Manage and maintain nursery and propagation areas, ensuring appropriate growing conditions, hygiene, organisation, and plant-care standards. Manage nursery plant stock to meet the requirements of garden collections, seasonal displays, replacement planting, conservation programmes, and other horticulture activities. Monitor and manage irrigation, humidity, shade, temperature, growing media, fertilisation, and plant nutrition within propagation and nursery areas. Coordinate the movement of successfully propagated plants from propagation areas into nursery, greenhouse, indoor, or outdoor garden environments. Support appropriate hardening and acclimatisation of young plants prior to establishment within garden collections. Develop, test, document, and refine species-specific propagation protocols, particularly for rare, endangered, sensitive, and difficult-to-propagate plant species. Conduct propagation trials to identify methods that improve germination, rooting, survival, and establishment rates. Collaborate with curators, botanists, horticulturists, conservation specialists, and other technical staff to identify propagation priorities. Support ex situ conservation and collection-development programmes through propagation of priority plant species. Ensure propagation activities maintain appropriate provenance and collection information for conservation and scientifically important material. Maintain detailed records of propagation activities, methods, source material, dates, treatments, environmental conditions, quantities, germination rates, rooting rates, losses, and overall success rates. Maintain accurate nursery stock inventories and update relevant plant collection or propagation databases. Analyse propagation outcomes and use results to improve future propagation protocols and practices. Implement appropriate nursery hygiene, sanitation, plant-health, and biosecurity procedures. Support Integrated Pest Management (IPM) within nursery and propagation areas. Maintain propagation tools, equipment, facilities, and work areas in a clean, safe, and operational condition. Ensure propagation activities comply with applicable health and safety, environment, biosecurity, and horticulture operating procedures. Requirements Bachelor's degree in Horticulture, Botany, Plant Sciences, Plant Biology, or a related discipline. Specialist training or certification in plant propagation, nursery management, seed technology, grafting, or related horticulture disciplines is advantageous. Additional training in rare plant propagation, seed conservation, nursery biosecurity, or plant conservation is advantageous. Minimum 5+ years of relevant professional experience in plant propagation and nursery horticulture. Demonstrated experience propagating plants using multiple methods, including seeds and cuttings. Practical experience with grafting, budding, layering, division, and other vegetative propagation techniques is highly desirable. Experience selecting, collecting, preparing, and handling seed and vegetative propagation material. Demonstrated experience with seed germination, dormancy-breaking treatments, and seedling establishment. Practical experience preparing and rooting cuttings using appropriate growing media, environmental conditions, and rooting treatments. Experience managing nursery areas and plant stock for botanic, horticulture, landscape, conservation, or comparable plant collections. Experience monitoring and managing irrigation, humidity, temperature, shade, growing media, and plant nutrition within nursery and propagation environments. Experience monitoring plant health and addressing pests, diseases, nutrient deficiencies, and environmental stresses during propagation. Demonstrated experience developing, testing, or refining plant propagation protocols. Experience propagating rare, endangered, sensitive, or difficult-to-propagate species is preferred. Experience supporting ex situ conservation, botanical collection development, or conservation propagation programmes is advantageous. Experience with the hardening, acclimatisation, and establishment of propagated plants into nursery, greenhouse, or garden environments. Demonstrated experience maintaining detailed propagation records and monitoring germination, rooting, survival, and success rates. Experience maintaining nursery stock inventories and plant provenance or accession information. Experience implementing nursery hygiene, sanitation, biosecurity, and Integrated Pest Management practices. Experience collaborating with horticulturists, botanists, curators, researchers, and conservation specialists on propagation programmes. Previous experience within a botanic garden, nursery, arboretum, conservation facility, research institution, seed facility, or comparable horticulture environment is preferred.

Location: Riyadh, Saudi Arabia We are seeking an experienced Plant Labelling Officer to support the accurate identification, documentation, labelling, mapping, and interpretation of living plant collections within a Botanic Garden environment. The role will be responsible for maintaining accurate plant labels, collection records, databases, mapping systems, and visitor-facing botanical information. The successful candidate will work closely with botanists, horticulturists, curators, and other technical specialists to ensure plant identities and collection information remain accurate, consistent, and up to date. Key Responsibilities Create, install, inspect, update, and maintain plant labels across indoor and outdoor collections. Ensure labels include accurate scientific names, common names, family information, geographic origin, accession details, and other relevant information. Verify botanical nomenclature and taxonomy using recognised botanical references. Conduct regular audits to identify missing, damaged, outdated, duplicated, or inaccurate labels. Coordinate the correction and replacement of plant labels. Work with botanists, horticulturists, curators, and other specialists to verify plant identification. Maintain consistency between physical labels, accession records, databases, maps, and collection-management systems. Manage and update plant-record databases and maintain accurate records of plant accessions, locations, provenance, movements, replacements, and losses. Support plant accessioning and deaccessioning activities. Maintain plant collection mapping systems and conduct field verification of plant locations. Support the integration of plant records with GIS, digital mapping, and collection-management systems . Develop and maintain botanical interpretation and visitor-facing information materials. Translate technical botanical and horticultural information into clear and accessible content. Support digital plant-identification tools, QR-code systems, mobile applications, interactive maps, and digital collection platforms. Conduct quality-control reviews of physical and digital plant information. Support plant inventories and collection audits. Maintain appropriate data-quality, backup, and version-control practices. Requirements Bachelor's degree in Horticulture, Botany, Plant Sciences, Plant Taxonomy , or a related discipline; postgraduate qualification is advantageous. Minimum 5+ years of relevant professional experience in horticulture, botanical collections, plant identification, education, or technical capacity-building. Strong knowledge of plant identification, taxonomy, nomenclature, and classification , with the ability to identify plants using morphological characteristics, botanical references, and taxonomic keys. Proven experience in plant labelling, living-collection documentation, accessioning, provenance, and collection management . Experience managing plant databases, electronic records, GIS, mapping systems, and digital collection-management platforms . Strong research, information-verification, data-quality, and quality-control skills, with excellent attention to detail. Experience developing and delivering horticulture training programmes , including practical, hands-on training. Experience developing training materials, technical guides, manuals, presentations, and educational resources related to horticulture. Experience assessing training needs, evaluating competency, and supporting internships, apprenticeships, vocational training, or work-based learning programmes. Experience conducting horticulture workshops, demonstrations, or community-engagement programmes. Ability to translate technical botanical and horticultural information into clear, engaging, visitor-facing content. Experience working collaboratively with botanists, horticulturists, curators, researchers, educational institutions, and other technical specialists . Familiarity with digital plant-identification tools, QR-code systems, mobile applications, and interactive mapping is advantageous. Previous experience in a botanic garden, public garden, horticulture institution, nursery, educational institution, or comparable environment is preferred. Strong written communication, technical documentation, organisational, and problem-solving skills. Professional training or educational delivery experience in English and Arabic is preferred.

Location: Dammam, Saudi Arabia ERAM is seeking experienced Material Movers / Loading & Unloading Personnel with exposure to Post-Weld Heat Treatment (PWHT) operations for an industrial project in Saudi Arabia. Key Responsibilities: Load, unload, and transport pipes, spools, pressure vessels, structural steel, and other fabrication materials. Support PWHT operations by moving materials to and from heat treatment areas or furnaces. Assist PWHT technicians during setup, execution, and completion of heat treatment activities. Operate material handling equipment such as forklifts, pallet jacks, chain blocks, or cranes (where authorized). Ensure safe handling, storage, and movement of materials in accordance with site safety procedures. Maintain housekeeping and assist with general yard and fabrication activities. Requirements Experience in PWHT (Post-Weld Heat Treatment) projects, fabrication yards, refineries, petrochemical plants, or piping construction. Hands-on experience in loading, unloading, and material handling within industrial environments. Knowledge of safe lifting practices and material handling procedures. Experience working on Saudi Aramco, SABIC, EPC, or similar industrial projects is an advantage. Ability to work in physically demanding environments while following HSE standards. Contract Duration: 1 Year

Location: Dammam, Saudi Arabia We are seeking a skilled Cleaning Technician with experience working in a Post Weld Heat Treatment (PWHT) plant. The successful candidate will be responsible for cleaning industrial equipment, components, and work areas while ensuring compliance with safety, quality, and operational standards. The role requires knowledge of industrial cleaning methods and experience working in fabrication or heat treatment environments. Key Responsibilities Perform cleaning of PWHT furnaces, fixtures, tools, piping, and associated equipment. Clean fabricated components before and after PWHT using approved methods and materials. Remove scale, rust, oil, grease, and other contaminants from metal surfaces. Operate industrial cleaning equipment, including pressure washers, vacuum systems, and hand tools. Maintain cleanliness of work areas, workshops, and storage locations. Dispose of waste materials in accordance with company procedures and environmental regulations. Support PWHT operations by preparing equipment and work areas for production. Qualifications High school diploma or equivalent. Certificate in industrial cleaning or related technical field is an advantage. Experience Minimum 2–5 years of experience as a Cleaning Technician in an industrial, fabrication, refinery, or PWHT plant environment. Experience working with heavy industrial equipment and metal components. Familiarity with industrial cleaning chemicals and safe handling practices. Skills & Competencies Knowledge of industrial cleaning techniques and equipment. Understanding of PWHT plant operations and fabrication environments. Awareness of HSE standards and safe work practices. Ability to work independently and as part of a team. Good physical fitness and ability to work in demanding industrial environments. Basic communication and reporting skills. Working Conditions

Location: Dhahran, Saudi Arabia Eram Talent is seeking a detail-oriented and highly skilled CNC Coolant Filling Technician with specific experience in Post Weld Heat Treatment (PWHT) plant environments. The successful candidate will be responsible for the comprehensive management, preparation, and maintenance of metalworking fluids and coolants for high-precision CNC machinery. This role is critical to maximizing tool life, ensuring machining quality, and maintaining safe, continuous operations within a heavy industrial setting. Key Responsibilities Coolant Management: Accurately mix, distribute, and replenish coolants, cutting fluids, and lubricants across multiple CNC machines according to specific operational parameters. System Testing & Monitoring: Perform daily chemical tests using refractometers and pH meters to monitor coolant concentration, alkalinity, and biological control. Equipment Maintenance: Execute routine cleaning of machine sumps, operate tramp oil skimmers, and maintain coolant recycling and filtration equipment to prevent fluid degradation. PWHT Plant Integration: Safely navigate and operate within heavy industrial environments, specifically alongside Post Weld Heat Treatment (PWHT) operations, ensuring all fluid management aligns with the plant's production and heat-treating schedules. Troubleshooting: Identify and resolve fluid-related issues such as foaming, foul odors, rust, or poor tool life, adjusting chemical dosing as necessary. Inventory Control: Track the consumption of chemical inventory, manage stock levels of raw coolant fluids, and initiate purchase requests to prevent shortages. HSE Compliance: Strictly adhere to all Health, Safety, and Environmental (HSE) protocols regarding the handling, storage, and disposal of hazardous chemicals and waste fluids. Maintain accurate logs and Material Safety Data Sheets (MSDS). Requirements Education: High School Diploma, Technical Diploma, or equivalent certification in mechanical maintenance, machining, or industrial chemistry. Core Experience: Minimum of 5 years of hands-on experience in CNC machine maintenance, specifically focused on fluid and coolant management. Industry Experience (Mandatory): Proven work history within heavy manufacturing, Oil & Gas, or large-scale industrial plants. Specific experience working in or around PWHT (Post Weld Heat Treatment) plants is strictly required. Technical Skills: * Proficiency in using fluid testing equipment (e.g., refractometers, titration kits). Strong understanding of coolant chemistry, mixing ratios, and bacterial control. Familiarity with CNC sump cleaning operations and industrial pumping equipment. HSE Knowledge: Solid understanding of industrial safety standards (e.g., OSHA, local regulations) and safe chemical handling/disposal procedures. Soft Skills: Excellent physical stamina, strong attention to detail, and the ability to work effectively both independently and alongside machining operators.

Location: Al Jubail, Saudi Arabia; Al Khobar, Saudi Arabia; Karachi, Pakistan; Jamnagar, India; Cairo, Egypt We are seeking experienced Field Compliance Coordinators to support our Oil & Gas operations in the areas of Gas Plants (Environmental) and Construction Safety. The successful candidates will be responsible for ensuring compliance with HSE policies, environmental regulations, company standards, and industry best practices while promoting a proactive safety and environmental culture across field operations. Key Responsibilities Ensure compliance with company HSE policies, environmental regulations, and applicable industry standards. Conduct field inspections, audits, and compliance assessments across gas plant and construction activities. Monitor and support Permit-to-Work (PTW), Lockout/Tagout (LOTO), hazard identification, risk assessments, and safe work practices. Coordinate environmental monitoring, waste management, spill response, incident investigations, and corrective action tracking. Implement and maintain Environmental Management Systems (EMS) and Safety Management Systems (SMS) to ensure continuous compliance. Deliver HSE inductions, toolbox talks, safety and environmental awareness programs, and contractor training. Prepare compliance reports, analyze inspection findings, and recommend improvements to enhance operational performance. Requirements Bachelor's degree in Engineering, HSE, Environmental Science, Industrial Engineering, or a related discipline from an accredited institution. 10 - years of relevant experience, including a minimum of 7 years in the Oil & Gas industry, preferably in gas plants, construction, or mega projects. Professional certifications such as NEBOSH IGC, IOSH, ISO 14001 Lead Auditor, or equivalent are highly preferred. Strong knowledge of Environmental Management Systems (EMS), Safety Management Systems (SMS), Process Safety Management (PSM), and applicable HSE regulations. Hands-on experience in field compliance inspections, audits, hazard identification, risk assessments, incident investigations, and corrective action management. Experience with Permit-to-Work (PTW), Lockout/Tagout (LOTO), environmental monitoring, waste management, emergency response, and contractor compliance. Proven ability to develop and deliver HSE training, toolbox talks, and safety/environmental awareness programs.

Location: Al Jubail, Saudi Arabia We are seeking an experienced and safety-conscious Commissioning & Start-Up (CSU) Lead to oversee the successful transition of our Steam Methane Reformer (SMR) hydrogen production assets from the construction phase to commercial operation. You will lead the field execution team, manage interfaces between engineering, construction, and operations, and ensure that all plant systems are safely commissioned, tested, and fully functional in accordance with project specifications and industry standards. Key Responsibilities Leadership & Strategy: Provide technical and operational leadership for the site commissioning team. Develop and implement the Commissioning Execution Plan, including scheduling, resource mobilization, and budget management. Technical Oversight: Lead the end-to-end commissioning of SMR units, including the reformer furnace, shift converters, PSA (Pressure Swing Adsorption) purification systems, compressors, steam systems, and balance-of-plant (BOP) utilities. Safety & Compliance: Enforce rigorous safety protocols (Permit-to-Work, LOTO, HAZOP/HAZID compliance) throughout the construction, commissioning, and startup phases. Act as a safety champion on-site. Pre-Commissioning & Testing: Manage pre-commissioning activities, including mechanical completion walkdowns, piping system flushing/cleaning, leak testing, instrumentation loop checks, and control system (DCS/PLC) functional validation. Startup & Stabilization: Direct the first-time introduction of feedstocks and gases, manage the ramp-up process, and conduct performance test runs to verify that the plant meets design efficiency and production targets. Documentation & Handover: Ensure all commissioning documentation (test reports, punch lists, as-built records, handover dossiers) is accurate and complete. Facilitate the formal turnover of the facility to the Operations team. Stakeholder Coordination: Act as the primary liaison between project engineering, EPC contractors, vendors/OEMs, and the client/owner’s operations team to resolve technical issues and resolve punch list items efficiently. Requirements Education: Bachelor’s degree in Chemical, Mechanical, or Process Engineering. Experience: Minimum of 10+ years in the oil, gas, or chemical industry, with at least 5 years specifically in a lead capacity for the commissioning and startup of SMR Hydrogen plants . Technical Depth: Deep understanding of SMR process chemistry, thermodynamics, and high-temperature furnace operations. Expertise in hydrogen safety, high-pressure gas systems, and PSA unit operations. Proficiency in interpreting complex P&IDs, control logic, and loop diagrams. Leadership Skills: Proven track record of managing multi-disciplinary site teams and coordinating effectively with contractors and subcontractors. Problem Solving: Strong analytical skills to perform root cause analysis (RCA) during technical troubleshooting of complex process issues. Communication: Excellent verbal and written communication skills to report progress to stakeholders and train operational personnel on new systems. Preferred Qualifications Experience with other hydrogen technologies (e.g., electrolysis, carbon capture integration). Certification in Project Management (PMP) or relevant industry health and safety certifications. Experience in both greenfield and brownfield project environments. Working Conditions This is a field-based, 100% site-presence role. Must be willing to work at construction sites, which may include remote or international locations. Requires flexibility to work extended hours, weekends, or shifts during critical startup milestones.

Location: Monclova, Mexico; Monterrey, Mexico Company Overview Our client operates in a contract manufacturing and industrial manufacturing environment focused on fabrication, welding, assembly, electrical integration, and coating of complex modular systems. Our high-mix, engineered-to-order production environment requires disciplined execution, Lean Manufacturing, Continuous Improvement, and scalable operational leadership to support rapid growth and production demands across large-scale manufacturing facilities. Position Overview Uptalent is seeking a Plant Manager – Manufacturing to lead full-site operations at our Monclova, Mexico facility. The Plant Manager will oversee Manufacturing Managers, Production Managers, Value Stream Managers, and Supervisors while driving performance across fabrication, welding, industrial assembly, electrical integration, and paint operations. This Plant Manager role is responsible for full operational execution, scaling production, and delivering against throughput, quality, safety, and on-time delivery in a contract manufacturing environment. This role owns a large-scale manufacturing P&L ($100M+) and requires strong financial leadership, operational discipline, and experience scaling manufacturing operations in industrial environments. Key Responsibilities Plant Leadership & Manufacturing Operations Lead full-site manufacturing operations as a Plant Manager across fabrication, welding, industrial assembly, electrical integration, and paint Oversee Manufacturing Managers, Production Managers, Value Stream Managers, and Supervisors across all production functions Drive execution in a high-mix, engineered-to-order contract manufacturing environment Ensure alignment of production schedules, system integration activities, and Bill of Materials (BOM) execution across all departments Scale operations to support production growth, capacity expansion, and facility performance Lean Manufacturing & Continuous Improvement Lead enterprise Lean Manufacturing initiatives including 5S, Kaizen, and Continuous Improvement programs across the plant Apply Six Sigma, Root Cause Analysis, 5 Whys, and Fishbone methodologies to eliminate defects and improve performance Drive plant-wide improvements in throughput, cycle time, and operational efficiency Standardize processes and scale best practices across fabrication, welding, assembly, electrical, and paint operations KPI Ownership & Operational Performance Own plant-level KPIs including on-time delivery, on-time release, inventory turns, throughput, safety, and quality Drive ISO9001 compliance and ensure quality systems are embedded across all manufacturing functions Improve defect rates, reduce rework, and increase production stability Establish performance accountability across all levels of the organization Financial Ownership & P&L Management Own and manage a large manufacturing P&L ($100M+), including cost control, labor efficiency, and operational spend Partner with Finance on budgeting, forecasting, and cost optimization strategies Drive margin improvement through operational efficiency, waste reduction, and process optimization Monitor cost drivers including labor, material utilization, and overhead Safety, Quality & Compliance Lead plant-wide safety performance, ensuring compliance with OSHA standards and internal safety protocols Maintain a strong safety culture with measurable KPIs and continuous improvement initiatives Ensure compliance with ISO9001 and internal quality standards across all operations Cross-Functional Alignment Partner with Engineering to resolve system integration challenges, fitment issues, and design improvements Collaborate with Supply Chain to ensure material availability, BOM accuracy, and inventory performance Work with Quality to enforce standards and drive corrective actions Align with Program Management to support production schedules and delivery commitments Leadership & Organizational Development Build and lead a high-performing manufacturing organization across all production functions Develop Manufacturing Managers, Production Managers, and Supervisors to drive operational excellence Establish leadership accountability and performance standards across the plant Support workforce development including technical training, certifications, and leadership growth Requirements Required Qualifications 10–15+ years of experience in manufacturing leadership roles including Plant Manager, Operations Manager, or Manufacturing Manager Extensive experience managing large-scale manufacturing P&L ($100M+) Experience in contract manufacturing and industrial manufacturing environments Strong background across fabrication, welding, industrial assembly, electrical integration, and paint operations Proven experience leading Lean Manufacturing, Continuous Improvement, and Six Sigma initiatives Experience managing plant-level KPIs including throughput, inventory turns, on-time delivery, safety, and quality Strong operational and financial leadership experience in high-mix, engineered-to-order manufacturing environments Based in, or willing to relocate to, Monclova, Mexico or Monterrey, Mexico for a hybrid role Eligible to work in Mexico Preferred Qualifications Bachelor’s degree in Industrial Engineering, Mechanical Engineering, or a related technical discipline Experience scaling manufacturing operations in high-growth environments Experience with automation, welding robots, or advanced manufacturing processes Certified welder or electrician credential a plus Six Sigma or Lean Manufacturing certification, or experience with structured problem-solving methodologies Experience in data center manufacturing or infrastructure projects Experience in generator manufacturing Experience in switchgear or electrical equipment manufacturing Experience in BESS (battery energy storage systems) or battery systems manufacturing Experience in modular construction or modular manufacturing Experience in steel and metal fabrication manufacturing environments Benefits What We Offer The opportunity to work with leading and fast-growing companies across the North American market. Highly competitive compensation for top talent. A stable, long-term position with strong growth opportunities and the chance to continue developing your career.

Location: Dammam, Saudi Arabia; Jeddah, Saudi Arabia Eram Talent is seeking a dedicated Pasteurization Plant Operator to join a reputable client in Saudi Arabia. This role involves operating and monitoring the pasteurization process within a food or beverage production facility to ensure products meet safety, quality, and regulatory standards. As a Pasteurization Plant Operator, you will play a crucial part in maintaining the integrity and efficiency of production operations. Location: Eastern Region,Saudi Arabia Responsibilities Operate and monitor pasteurization equipment according to established procedures and safety guidelines. Conduct regular inspections and maintenance of pasteurization machinery to prevent breakdowns. Record and report operational data, including temperature, pressure, and production volumes. Identify and troubleshoot process deviations or equipment malfunctions promptly. Ensure compliance with food safety standards and quality control policies. Collaborate with quality assurance and maintenance teams to optimize production processes. Maintain a clean and safe working environment following health and safety protocols. Requirements Diploma or degree in Food Technology, or related field. 3+ Years of work experience in the same field Rotary filling machine krones filling machine Blow Molding Machine Tubular pasteurizer and CIP systems Proven experience in operating pasteurization or heat-treatment equipment within a production environment. Good understanding of food safety standards and quality assurance practices. Ability to perform routine maintenance and troubleshoot equipment issues. Strong attention to detail and adherence to safety procedures. Effective communication skills and ability to work in a team. Willingness to work in shifts as required.

Location: Riyadh, Saudi Arabia; Jeddah, Saudi Arabia Eram Talent is seeking a dedicated Pasteurization Plant Operator to join a reputable client in Saudi Arabia. This role involves operating and monitoring the pasteurization process within a food or beverage production facility to ensure products meet safety, quality, and regulatory standards. As a Pasteurization Plant Operator, you will play a crucial part in maintaining the integrity and efficiency of production operations. Location: Eastern Region,Saudi Arabia Responsibilities Operate and monitor pasteurization equipment according to established procedures and safety guidelines. Conduct regular inspections and maintenance of pasteurization machinery to prevent breakdowns. Record and report operational data, including temperature, pressure, and production volumes. Identify and troubleshoot process deviations or equipment malfunctions promptly. Ensure compliance with food safety standards and quality control policies. Collaborate with quality assurance and maintenance teams to optimize production processes. Maintain a clean and safe working environment following health and safety protocols. Requirements Diploma or degree in Food Technology, or related field. 3+ Years of work experience in the same field Proven experience in operating pasteurization or heat-treatment equipment within a production environment. Good understanding of food safety standards and quality assurance practices. Ability to perform routine maintenance and troubleshoot equipment issues. Strong attention to detail and adherence to safety procedures. Effective communication skills and ability to work in a team. Willingness to work in shifts as required.

Location: Dammam, Saudi Arabia Eram Talent is seeking a dedicated Pasteurization Plant Operator to join a reputable client in Saudi Arabia. This role involves operating and monitoring the pasteurization process within a food or beverage production facility to ensure products meet safety, quality, and regulatory standards. As a Pasteurization Plant Operator, you will play a crucial part in maintaining the integrity and efficiency of production operations. Location: Eastern Region,Saudi Arabia Job Duration : 1 Year Responsibilities Operate and monitor pasteurization equipment according to established procedures and safety guidelines. Conduct regular inspections and maintenance of pasteurization machinery to prevent breakdowns. Record and report operational data, including temperature, pressure, and production volumes. Identify and troubleshoot process deviations or equipment malfunctions promptly. Ensure compliance with food safety standards and quality control policies. Collaborate with quality assurance and maintenance teams to optimize production processes. Maintain a clean and safe working environment following health and safety protocols. Requirements Diploma or degree in Food Technology, or related field. 3+ Years of work experience in the same field Proven experience in operating pasteurization or heat-treatment equipment within a production environment. Good understanding of food safety standards and quality assurance practices. Ability to perform routine maintenance and troubleshoot equipment issues. Strong attention to detail and adherence to safety procedures. Effective communication skills and ability to work in a team. Willingness to work in shifts as required.

Location: Turaif, Saudi Arabia Eram Talent is urgently seeking an experienced HSE Officer with plant experience for a short-term contract of 25 days. This immediate joiner position is ideal for candidates who are proficient in managing health, safety, and environmental standards in industrial or plant settings. As a leading talent acquisition company, we are committed to providing top talent to meet the urgent needs of our clients in the Oil & Energy sector. Key Responsibilities Ensure compliance with all health, safety, and environmental regulations within the plant operations during the contract period. Conduct regular inspections and audits to identify hazards and implement corrective actions promptly. Monitor safe work practices and ensure all employees adhere to safety protocols. Assist in incident investigations and prepare detailed reports. Facilitate safety meetings and toolbox talks to enhance awareness on site. Maintain accurate documentation and records related to HSE activities throughout the contract. Provide guidance and support on emergency preparedness and response measures. Collaborate with site management to promote a culture of safety. Perform any additional duties required to ensure successful completion of HSE objectives within the 25-day period. Requirements Bachelor's degree or relevant qualification in Occupational Health and Safety, Environmental Science, or related field. Proven experience as an HSE Officer with specific plant experience. Strong understanding of plant safety regulations and compliance requirements. Ability to conduct effective safety audits, inspections, and risk assessments. Excellent communication and interpersonal skills. Certification such as NEBOSH, IOSH, or equivalent is preferred. Experience with incident investigation and reporting. Ready to join immediately for a 25-day short-term assignment. Ability to work efficiently under tight timelines and manage multiple priorities. Familiarity with emergency response procedures in a plant environment. Strong organizational skills and attention to detail. Benefits Salary is not a constraint ,company is looking for right candidate .