Location: Canada; United States
We offer full relocation support, including immigration assistance. You may work remotely at first while your immigration process is being completed. Long-term, the role will transition to onsite work in Montreal.
Role overview:
We are seeking a Satellite Bus System Engineer to design structural, thermal, power distribution, attitude control, propulsion, CD&H, TT&C/PDT, FSW and interface architecture that supports payloads and mission-operations for current and next-generation remote sensing and communications satellites. The role leads the definition, design, integration, verification and on-orbit support of the platform subsystems, ensuring compliance to mission requirements and company best-practice processes.
Tasks summary:
Architecture Concept & Requirements
• Translate mission‑level requirements (CONOPs, mass, volume, power, envelope, pointing, lifetime, redundancy, reliability…etc.) into system requirements and allocate them to platform subsystems (structures, TCS, EPS, GNC, PROP, C&DH, TT&C/PDT, FSW).
• Develop the Platform Architecture Description Document, Interface Control Documents (ICD) and Design Description.
• Perform requirement management and maintain bidirectional traceability throughout the program life cycle.
Concept Trade & Feasibility
• Lead trade studies for structural approach, thermal control concepts (MLI, heat pipes, radiators…etc.), power generation options (e.g. solar array & battery technologies).
Detailed Design
• Oversee detailed design of all major subsystems (structures, TCS, EPS, PROP, C&DH, C&T, GNC, payload interfaces).
• Conduct failure‑mode‑effects‑analysis (FMEA) in support to FDIR, fault‑tree analysis and reliability & availability predictions.
• Ensure compliance with mission requirement and payload specifics.
• Maintain platform level performance budgets
• Support FSW and Satellite Reference Database developments
Cross‑Functional Coordination, Stakeholder & Program Interaction
• Present technical status, risk analyses, and trade‑study results to senior management.
• Negotiate and maintain ICDs with payload and all platform subsystems.
• Support to DC & RF harness design, Platform and Payload layout.
• Support B&P (Phase 0 & pre-phase A).
Integration & Verification (IVV)
• Author verification plans, test matrices, and validation procedures for unit, subsystem, and platform level tests.
• Coordinate, supervise or support:
o Structural vibration, acoustic & shock testing
o TCT & Thermal vacuum testing
o Power distribution functional test
o Closed‑loop test on avionic testbed
• Support FSW integration
Technical Leadership & Mentorship
• Mentor, guide, lead a multidisciplinary team of junior or intermediate system engineers & interns
• Act as technical liaison with customers, partners and external vendors
• Act as Continuous Improvement stakeholder
• Contribute to company's knowledge‑base, process enhancements, and standards development.
Configuration, Documentation & Standards Management
• Maintain platform‑wide standards (structural margin, thermal‑control, power‑bus architecture, redundancy philosophy…etc.).
• Ensure all artefacts, analysis, software, documentations and deliverables are version controlled in PLM environment.
• Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.).
• Support Technology Road‑Mapping & Innovation
Launch‑Site, On‑Orbit & Operations Support
• Support launch‑site interface checklists with LVI responsible engineer, pre‑launch checkout procedures, and early‑orbit checkout scripts.
• Provide real‑time platform engineering support during launch, on‑orbit commissioning, anomaly investigations and contingency operations.
• Support SOOH development and associated operator training.
Required Qualifications:
· B.Sc. in Electrical Engineering, Aerospace or Physics with 10 + years of system design experience on LEO/MEO/GEO platforms.
· Deep knowledge of spacecraft bus subsystems and their interactions.
· Experience with power‑electronics design and high‑precision attitude‑control hardware.
· Strong understanding of aerospace system engineering fundamentals
· Hands-on individual who can support systems integration processes and capability to test systems and resolve problems
· Experience with Confluence and JIRA
· Demonstrated capability to efficiently work with little supervision
· Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity
· Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).
seniorCanada; United States; (Fastwater Staffing) Senior Platform Systems Engineer - Montreal, Canada | Full Relocation Package; We offer full relocation support, including immigration assistance
Location: Montreal, Canada
Tasks summary:
Architecture Concept & Requirements
• Translate mission‑level requirements (CONOPs, mass, volume, power, envelope, pointing, lifetime, redundancy, reliability…etc.) into system requirements and allocate them to platform subsystems (structures, TCS, EPS, GNC, PROP, C&DH, TT&C/PDT, FSW).
• Develop the Platform Architecture Description Document, Interface Control Documents (ICD) and Design Description.
• Perform requirement management and maintain bidirectional traceability throughout the program life cycle.
Concept Trade & Feasibility
• Lead trade studies for structural approach, thermal control concepts (MLI, heat pipes, radiators…etc.), power generation options (e.g. solar array & battery technologies).
Detailed Design
• Oversee detailed design of all major subsystems (structures, TCS, EPS, PROP, C&DH, C&T, GNC, payload interfaces).
• Conduct failure‑mode‑effects‑analysis (FMEA) in support to FDIR, fault‑tree analysis and reliability & availability predictions.
• Ensure compliance with mission requirement and payload specifics.
• Maintain platform level performance budgets
• Support FSW and Satellite Reference Database developments
Cross‑Functional Coordination, Stakeholder & Program Interaction
• Present technical status, risk analyses, and trade‑study results to senior management.
• Negotiate and maintain ICDs with payload and all platform subsystems.
• Support to DC & RF harness design, Platform and Payload layout.
• Support B&P (Phase 0 & pre-phase A).
Integration & Verification (IVV)
• Author verification plans, test matrices, and validation procedures for unit, subsystem, and platform level tests.
• Coordinate, supervise or support:
o Structural vibration, acoustic & shock testing
o TCT & Thermal vacuum testing
o Power distribution functional test
o Closed‑loop test on avionic testbed
• Support FSW integration
Technical Leadership & Mentorship
• Mentor, guide, lead a multidisciplinary team of junior or intermediate system engineers & interns
• Act as technical liaison with customers, partners and external vendors
• Act as Continuous Improvement stakeholder
• Contribute to company's knowledge‑base, process enhancements, and standards development.
Configuration, Documentation & Standards Management
• Maintain platform‑wide standards (structural margin, thermal‑control, power‑bus architecture, redundancy philosophy…etc.).
• Ensure all artefacts, analysis, software, documentations and deliverables are version controlled in PLM environment.
• Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.).
• Support Technology Road‑Mapping & Innovation
Launch‑Site, On‑Orbit & Operations Support
• Support launch‑site interface checklists with LVI responsible engineer, pre‑launch checkout procedures, and early‑orbit checkout scripts.
• Provide real‑time platform engineering support during launch, on‑orbit commissioning, anomaly investigations and contingency operations.
• Support SOOH development and associated operator training.
Required Qualifications:
· B.Sc. in Electrical Engineering, Aerospace or Physics with 10 + years of system design experience on LEO/MEO/GEO platforms.
· Deep knowledge of spacecraft bus subsystems and their interactions.
· Experience with power‑electronics design and high‑precision attitude‑control hardware.
· Strong understanding of aerospace system engineering fundamentals
· Hands-on individual who can support systems integration processes and capability to test systems and resolve problems
· Experience with Confluence and JIRA
· Demonstrated capability to efficiently work with little supervision
· Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity
· Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).
Location: Sainte-Anne-de-Bellevue, Canada
📍
Location:
Sainte-Anne-de-Bellevue, QC, Canada (West Montreal)
📄
Employment Type:
TBD
🏢
Work Arrangement:
Remote opportunities for U.S. and Canadian citizens; relocation assistance and bonus available for qualified UK and European candidates relocating to Canada
🚀
Start Date:
TBD
💰
Compensation:
TBD — based on skills and experience
Remote & Relocation Opportunities
U.S. and Canadian Citizens:
Remote work arrangement available.
UK and European Candidates:
Relocation assistance and a relocation bonus are available for qualified candidates willing to relocate to Canada.
Candidates should be prepared to collaborate with multidisciplinary spacecraft engineering teams, customers, partners, and suppliers.
Important Screening Requirements
Bachelor’s degree in
Electrical Engineering, Aerospace Engineering, or Physics
.
10+ years of electrical design engineering experience
on LEO, MEO, or GEO spacecraft missions.
Experience with spacecraft-level and unit-level
electromagnetic compatibility (EMC) requirements and simulations
.
Experience leading EMC engineers or multidisciplinary engineering task forces.
Strong understanding of aerospace systems engineering fundamentals.
Hands-on experience supporting systems integration, testing, and troubleshooting.
Experience with
Confluence and JIRA
.
Strong analytical, problem-solving, and technical communication skills.
Excellent written and verbal communication skills in English.
French is an asset but is not required.
About the Role
We are seeking an experienced
Spacecraft EMC Systems Engineer
to lead electromagnetic compatibility architecture, analysis, electrical design reviews, and verification activities for spacecraft systems.
The role focuses on defining EMC requirements, evaluating electrical and electromagnetic interactions across spacecraft subsystems, overseeing EMC testing, and coordinating with multidisciplinary engineering teams, customers, partners, and suppliers.
The successful candidate will provide technical leadership throughout the spacecraft development lifecycle, from early design and requirements definition through integration, verification, and on-orbit anomaly support.
What We’re Looking For
We’re looking for a technically strong and hands-on
EMC engineering professional
with extensive spacecraft electrical design experience and the ability to lead complex electromagnetic compatibility activities.
The ideal candidate can define EMC architectures, assess conducted and radiated emissions and susceptibility, recommend mitigation strategies, oversee verification testing, and resolve cross-subsystem electromagnetic issues.
Strong candidates will combine deep technical expertise in spacecraft EMC with engineering leadership, sound judgment, and the ability to communicate technical risks and solutions to multidisciplinary teams and stakeholders.
Key Responsibilities
EMC Architecture, Concepts & Requirements
Capture, allocate, and maintain traceability of EMC functional, performance, and technical requirements.
Define spacecraft EMC architecture, including:
Shielding strategies
Grounding schemes
Antenna placement
Mode control
Harness segregation and routing constraints
Ensure EMC requirements are considered throughout spacecraft design and development.
Identify potential electromagnetic compatibility risks early in the design lifecycle.
EMC Analysis & Electrical Design
Perform spacecraft-level EMC analyses, accounting for payload-specific requirements, including:
Radiated and conducted emissions
Radiated and conducted susceptibility
Antenna coupling
Shielding effectiveness
Fuse blowing
Verify EMC compliance early in the design cycle and recommend mitigation measures.
Apply shielding, filtering, grounding schemes, and layout rules to address EMC/EMI concerns.
Review DC power distribution architecture, including primary and secondary buses, converters, fusing, and protection, for EMC/EMI considerations.
Review conductors, terminations, connectors, and backshells to ensure materials, gauges, and shielding meet EMI control requirements.
Cross-Functional Coordination & Program Support
Communicate technical status, risk assessments, and trade-study results to senior management, customers, and partners.
Support Interface Control Documents (ICDs) with payload and platform teams and suppliers.
Serve as the
EMC authority during system and subsystem design reviews
.
Coordinate with RF, Power, Structures, Propulsion, Software, and Ground Segment teams to resolve cross-disciplinary EMC issues early.
Support business development and proposal activities during Phase 0 and pre-Phase A.
Collaborate with engineering teams and external suppliers to maintain EMC compliance across spacecraft subsystems.
Integration, Verification & Testing
Develop the
EMC Verification Master Plan
covering component-level, subsystem-level, and full-spacecraft testing.
Define verification activities for:
Conducted emissions and susceptibility (CE/CS)
Radiated emissions and susceptibility (RE/RS)
Oversee test facility setup, instrumentation calibration, test execution, data reduction, and results certification.
Author test procedures and define acceptance criteria.
Lead CE/CS and RE/RS testing on hardware.
Review supplier test results and verify compliance with EMC requirements.
Support systems integration, troubleshooting, and resolution of EMC-related issues.
Technical Leadership & Mentorship
Mentor junior engineers and interns.
Provide EMC training sessions and technical guidance.
Serve as a technical liaison with customers, partners, and external vendors.
Coordinate multidisciplinary engineering activities and help resolve complex technical challenges.
Contribute to continuous improvement initiatives, internal knowledge bases, process enhancements, and standards development.
Configuration, Documentation & Standards Management
Participate in Change Control Boards (CCBs) and ensure impact analyses are conducted for electrical changes.
Maintain GDIR and streamline EDTS processes.
Ensure analyses, technical artifacts, and documentation are version-controlled within the Product Lifecycle Management (PLM) environment.
Support spacecraft design reviews, including:
System Requirements Review (SRR)
Preliminary Design Review (PDR)
Critical Design Review (CDR)
Manufacturing Readiness Review / Test Readiness Review (MRR/TRR)
Support technology roadmapping and innovation activities.
On-Orbit & Operations Support
Support root-cause investigations of on-orbit anomalies.
Update design baselines and document lessons learned following anomaly investigations.
Support development of the
Spacecraft Operations and User Handbook (SOOH)
.
Contribute to related operator training and operational readiness activities.
Required Qualifications
Bachelor’s degree in
Electrical Engineering, Aerospace Engineering, or Physics
; a Master’s degree is preferred.
10+ years of electrical design engineering experience
on LEO, MEO, or GEO missions.
Proficiency in spacecraft-level and unit-level EMC requirements and simulations.
Experience supervising EMC engineers or leading multidisciplinary task forces.
Strong understanding of aerospace systems engineering fundamentals.
Hands-on experience supporting systems integration, testing, and troubleshooting.
Experience with
Confluence and JIRA
.
Ability to work independently with minimal supervision.
Strong analytical and problem-solving skills, including the ability to simplify complex problems and solve them through analysis, similarity, or creative approaches.
Excellent written and verbal communication skills in English.
Preferred Qualifications
Master’s degree in a relevant engineering or physics discipline.
Knowledge of French.
Experience working with multidisciplinary spacecraft engineering teams, customers, partners, and external suppliers.
Experience leading spacecraft EMC design reviews, verification activities, and cross-functional technical investigations.
Location: Quincy, United States
📍
Location:
Quonset, RI
📄
Employment Type:
Contract
🏢
Work Arrangement:
On-site
🚀
Start Date:
TBD
💰
Compensation:
TBD — based on skills and experience
Important Screening Requirements
7+ years of electronics experience
in an R&D or prototyping environment.
Extensive experience building and troubleshooting cables, wire harnesses, and connectors.
Proficiency in soldering, crimping, and mechanical cable assembly.
Ability to independently complete complex R&D tasks with minimal supervision.
Familiarity with product development from
New Product Introduction (NPI) through scaled production
.
Experience reading electrical schematics and component drawings and using electronics test equipment.
Must be eligible to obtain and maintain an active
U.S. Secret security clearance
.
About the Role
We are seeking an experienced
Lead R&D Technician
to coordinate daily technical build activities and support the assembly, integration, and troubleshooting of complex autonomous underwater vehicles (AUVs) and electromechanical systems.
This contract opportunity combines hands-on technical work with day-to-day coordination of build activities. You will help organize workflows, establish technical priorities, guide operators, and collaborate with engineering and production teams to meet project milestones.
The successful candidate will bring strong electronics assembly and troubleshooting skills, experience in R&D or prototyping environments, and the ability to keep technical work organized while supporting product development and manufacturing.
What We’re Looking For
We’re looking for a hands-on
technical lead with extensive electronics and cable assembly experience
who can independently troubleshoot complex hardware while coordinating daily build activities.
The ideal candidate is comfortable working with engineering drawings, electrical schematics, and test equipment; guiding technicians and operators; and managing competing priorities in a fast-paced R&D and manufacturing environment.
Strong candidates will combine advanced technical assembly skills with practical leadership, knowledge transfer, process improvement, and an understanding of the product lifecycle from prototyping through scaled production.
Key Responsibilities
R&D Assembly & Vehicle Integration
Support all stages of vehicle development and manufacturing, providing technical feedback to engineering teams.
Build, integrate, and test complex electromechanical assemblies for AUV systems.
Use hand tools, assembly tooling, and general manufacturing equipment.
Apply advanced hardware assembly, troubleshooting, and repair skills.
Support the production and delivery of commercial and development products.
Cable, Harness & Electronics Assembly
Build, assemble, and troubleshoot complex cables, wire harnesses, and connectors.
Perform soldering, crimping, and mechanical cable assembly.
Read and interpret electrical schematics and component drawings.
Use electronics test equipment to support assembly, testing, and troubleshooting.
Help identify and resolve hardware issues during prototyping and production.
Technical Leadership & Operator Support
Provide technical guidance, knowledge transfer, and process support to operators.
Coordinate day-to-day technical tasks with technicians and the Production Supervisor.
Support collaboration and knowledge sharing across engineering and manufacturing teams.
Help operators resolve technical challenges and maintain consistent build quality.
Promote cross-functional support and effective communication.
Workflow & Production Coordination
Organize build workflows, manage multiple priorities, and maintain project schedules.
Help prioritize work to meet delivery targets and project milestones.
Complete daily transactions in production systems such as MES, NetSuite, and JIRA.
Support the transition from R&D and prototyping activities to production.
Balance competing technical requirements in a fast-paced environment.
Process Improvement & Manufacturing Support
Participate in
5S and continuous improvement initiatives
.
Support Lean manufacturing principles and improvements to build processes.
Help improve assembly workflows, technical procedures, and production efficiency.
Work with engineering and production teams to address manufacturing challenges.
Support reliable delivery of development and commercial products.
Required Qualifications
7+ years of electronics experience in an R&D or prototyping environment.
Ability to execute complex technical tasks independently with minimal supervision.
Extensive experience with cable, harness, and connector assembly and troubleshooting.
Proficiency in soldering, crimping, and mechanical cable assembly.
Working knowledge of product development, NPI, scaled production, and Lean manufacturing principles.
Ability to read and interpret electrical schematics and component drawings.
Hands-on experience with:
Power supplies
Electronic loads
Oscilloscopes
Function generators
Data acquisition systems
Measurement sensors
Strong organizational, communication, and troubleshooting skills.
Dependability and attention to detail.
Ability to balance competing priorities in a fast-paced environment.
Eligibility to obtain and maintain an active U.S. Secret security clearance.
Preferred Qualifications
Experience with machining, sheet metal fabrication, or 3D printing.
Experience collaborating across engineering and manufacturing teams.
Experience testing small electronics assemblies through large vehicle structures.
Experience developing test setups and executing procedures to validate design iterations.
Material handling or hoisting experience, including overhead gantry operations or rigging.
Experience with
subsea robotics, AUVs, UUVs, or marine systems
.
Location: Bellevue, United States
📍
Location:
Bellevue, WA
📄
Employment Type:
6-Month W-2 Contract | Potential for Full-Time Conversion
🏢
Work Arrangement:
Hybrid — 3 Days/Week On-Site
🗓️
Schedule:
Monday–Friday
🚀
Start Date:
TBD
💰
Compensation:
TBD — based on skills and experience
Important Screening Requirements
Must be a
U.S. Person — U.S. Citizen or U.S. Permanent Resident (Green Card holder)
.
Must be able to work on-site in Bellevue, WA,
3 days per week
.
Strong hands-on experience developing
embedded C firmware
for 32-bit ARM Cortex-M or similar microcontrollers.
Experience with register-level peripheral programming.
Hands-on PCB and firmware bring-up experience.
Working knowledge of
USB-C / USB Power Delivery (USB-PD)
.
Experience communicating with companion ICs through I2C, SPI, and/or UART.
Proficiency with bench-level debugging equipment, including oscilloscopes, logic/protocol analyzers, multimeters, SWD/JTAG debuggers, and UART logging.
Ability to work from datasheets, register tables, and schematics.
Proficiency with Git.
About the Role
We are seeking a hands-on
Embedded Firmware / Software Engineer – USB-C Power Delivery
to bring up new hardware platforms built around USB-C Power Delivery controllers and develop firmware from initial PCB power-on through production-quality implementation.
This is a low-level embedded firmware engineering role focused on hardware interaction, not application-level software development. You will develop and debug embedded C firmware on ARM Cortex-M microcontrollers, configure companion ICs over I2C, SPI, and UART, and work directly at the hardware bench alongside electrical and hardware engineers.
The ideal candidate can move comfortably between embedded C development, PCB bring-up, USB-PD functionality, peripheral communication, and hardware-level debugging.
What We’re Looking For
We’re looking for an engineer who is genuinely comfortable working at the hardware bench and has personally brought up and debugged embedded hardware.
The ideal candidate can explain how they powered on a new board, validated power and clocks, initialized the microcontroller, configured peripherals, debugged hardware and firmware issues, and verified USB-C Power Delivery behavior.
Strong candidates will combine expertise in:
Embedded C + ARM Cortex-M + PCB Bring-Up + USB-C/USB-PD + I2C/SPI/UART + Bench Debugging
Candidates whose experience is limited to application-level software development, without hands-on firmware and hardware bring-up experience, may not be a fit.
Key Responsibilities
PCB Bring-Up & Hardware Validation
Bring up new printed circuit boards (PCBs) from initial power-on through functional firmware.
Validate power rails, clocks, and hardware interfaces during board bring-up.
Connect and configure SWD/JTAG debuggers.
Enable and validate microcontroller peripherals.
Work closely with hardware engineers to isolate hardware versus firmware issues.
Support development from initial prototype bring-up through production-quality firmware.
Embedded Firmware Development
Develop and debug embedded C firmware on ARM Cortex-M-class microcontrollers.
Implement register-level peripheral programming.
Configure and communicate with companion ICs over I2C, SPI, UART, and other peripheral interfaces.
Work within memory-constrained environments, accounting for flash and RAM limitations.
Analyze datasheets, register tables, and schematics to configure and troubleshoot hardware.
Document firmware configurations, implementation decisions, and design considerations.
USB-C & Power Delivery Implementation
Implement and debug USB-C and USB-PD functionality, including:
Source and sink roles
Dual-role power (DRP)
Power-contract negotiation
Fault handling and recovery
Validate USB-PD behavior and troubleshoot power-delivery issues.
Support the implementation and verification of reliable USB-C Power Delivery functionality.
Work with hardware engineers to resolve issues involving USB-PD controllers and associated circuitry.
Hardware Debugging & Testing
Debug firmware and hardware directly at the bench using:
Oscilloscopes
Logic and protocol analyzers
Digital multimeters
SWD/JTAG debuggers
UART logging
Investigate hardware and firmware issues using schematics, register maps, and measurement results.
Validate peripheral communication and hardware functionality.
Support troubleshooting throughout development and testing.
Documentation & Engineering Collaboration
Maintain clear documentation of firmware configurations and design decisions.
Collaborate closely with hardware and electrical engineering teams.
Communicate debugging findings and support root-cause investigations.
Use Git for source control and firmware development workflows.
Contribute to firmware quality and production readiness.
Required Qualifications
Strong proficiency in
embedded C
.
Experience developing firmware on
32-bit ARM Cortex-M or similar microcontrollers
.
Strong understanding of:
Interrupts
Register-level peripheral programming
Memory-constrained embedded development
Flash and RAM limitations
Working knowledge of USB-C and USB Power Delivery.
Understanding of USB-PD source, sink, and dual-role power (DRP) configurations.
Understanding of USB-PD power-contract negotiation and fault handling.
Hands-on experience with hardware and PCB bring-up.
Experience communicating with and configuring companion ICs through I2C, SPI, UART, or similar interfaces.
Ability to read and work from datasheets, register maps, and schematics.
Experience using oscilloscopes, logic/protocol analyzers, multimeters, SWD/JTAG debuggers, and UART logging.
Proficiency with Git.
Strong troubleshooting and hardware/firmware debugging skills.
Ability to collaborate closely with hardware and electrical engineering teams.
Preferred Qualifications
Experience with Infineon or Cypress MCU SDKs/IDEs and associated middleware.
Experience with
ModusToolbox, STM32Cube, or similar development environments
.
Experience creating or customizing a Board Support Package (BSP).
Experience with firmware bootloaders and update mechanisms, including DFU or equivalent.
Experience with power-path or regulator firmware, including:
VBUS control
Over-voltage protection (OVP)
Under-voltage protection (UVP)
Over-current protection (OCP)
Fault detection and recovery
Enable and soft-start sequencing
Experience with USB subsystems such as:
USB hubs
DisplayPort Alt Mode
Redrivers
Retimers
Billboard devices
Nice-to-Have Qualifications
Experience with
Infineon EZ-PD / PMG1 or Cypress CCGx USB-PD controllers
.
Experience with ModusToolbox.
Experience implementing continuous integration (CI) for embedded firmware builds.
Familiarity with USB-IF Power Delivery compliance requirements and USB-C specifications.
Experience taking embedded products from prototype hardware through production.
Location: Quonset, United States
📍
Location:
Quonset, RI
📄
Employment Type:
Contract
🏢
Work Arrangement:
On-site
🚀
Start Date:
TBD
💰
Compensation:
TBD — based on skills and experience
Important Screening Requirements
4+ years of hands-on experience
in testing, inspection, or manufacturing assembly.
Experience with high-pressure testing, including hydrostatic or pneumatic testing, leak detection, or comparable quality-verification testing.
Ability to read and interpret technical documentation, engineering drawings, and detailed test plans.
Mechanical aptitude with high-pressure systems, pumps, fittings, fluid manifolds, and instrumentation gauges.
Strong attention to detail and procedural discipline.
Must be eligible to obtain and maintain an active
U.S. Secret security clearance
.
About the Role
We are seeking a hands-on
Pressure Vessel Test Technician
to operate and maintain a hydrostatic test chamber used to validate sealed vessels, housings, and pressurized components for advanced underwater systems.
This contract opportunity focuses on executing pressure tests, monitoring pressure data, identifying leaks and structural anomalies, and preparing accurate test documentation. You will work closely with production, quality, and engineering teams to verify that components meet engineering specifications before integration.
The ideal candidate will bring practical pressure-testing experience, strong mechanical aptitude, and a safety-first approach to operating high-pressure equipment and inspecting critical components.
What We’re Looking For
We’re looking for a
safety-conscious test technician
with hands-on experience in hydrostatic or pneumatic testing, leak detection, and mechanical inspection.
The ideal candidate can independently prepare test setups, operate pressure-testing equipment, interpret gauges and sensor data, identify nonconforming conditions, and maintain accurate test records.
Strong candidates will combine technical testing skills with procedural discipline, attention to detail, and the ability to collaborate with production, quality, and engineering teams. Experience in maritime, aerospace, defense, or subsea systems is a plus.
Key Responsibilities
Hydrostatic Testing & Pressure Validation
Set up, operate, and monitor the hydrostatic test chamber.
Perform pressure testing on sealed vessels, housings, and related components.
Follow established procedures to reach specified proof pressures and maintain required dwell times.
Monitor pressure decay and check for leaks throughout testing.
Ensure testing is performed according to approved procedures and engineering requirements.
Test Setup & Fixturing
Prepare test articles by installing fittings, plugs, seals, sensors, and fluid interfaces.
Verify test fixtures and setups before pressurization.
Maintain and stage testing fixtures, high-pressure tooling, and supporting hardware.
Ensure test setups are properly configured before beginning each procedure.
Inspection & Anomaly Identification
Visually inspect components before, during, and after testing.
Identify leaks, seal degradation, weld flaws, structural anomalies, and other nonconformances.
Document and isolate nonconforming conditions.
Support investigations into failed components and help identify potential root causes.
Data Recording & Documentation
Record test parameters, cycles, results, and observed conditions.
Complete test logs, formal reports, and quality-system documentation.
Interpret pressure gauges and sensor data to maintain test integrity.
Ensure test results are accurate, traceable, and properly documented.
Equipment Maintenance & Safety
Perform routine preventive maintenance on chambers, pumps, valves, high-pressure lines, and instrumentation.
Identify equipment requiring repair, overhaul, or recalibration.
Follow safety procedures for high-pressure pneumatic and hydrostatic operations.
Maintain clean and organized test areas.
Report process anomalies, equipment hazards, and other safety concerns.
Cross-Functional Collaboration & Process Improvement
Coordinate test schedules and communicate results to production, quality, and engineering teams.
Support root-cause investigations for failed units.
Provide technical feedback on recurring manufacturing issues and design considerations.
Recommend improvements to test documentation, fixtures, cycle times, and chamber throughput.
Help improve testing efficiency, consistency, and overall process reliability.
Required Qualifications
4+ years of hands-on experience
in testing, inspection, or manufacturing assembly.
Experience with hydrostatic or pneumatic pressure testing, leak detection, or comparable quality-verification testing.
Ability to interpret technical documentation, engineering drawings, and test plans.
Strong attention to detail when executing procedures and recording empirical data.
Mechanical aptitude with high-pressure systems, pumps, fittings, fluid manifolds, and instrumentation gauges.
Effective written and verbal technical communication skills.
Strong safety awareness and ability to follow detailed testing procedures.
Eligibility to obtain and maintain an active U.S. Secret security clearance.
Preferred Qualifications
Experience in
maritime, aerospace, or defense manufacturing
.
Experience with hydrostatic proof, leak, or burst testing of sealed electronic enclosures or pressure hulls.
Familiarity with
subsea robotics, AUVs, UUVs, or marine equipment
.
Current or previous Visual Testing (VT) or Penetrant Testing (PT) inspection credentials.
Experience with ERP or MES platforms for work order tracking and test data logging.
Current or previous overhead crane, rigging, or confined-space certifications.
Technical certificate, trade diploma, or Associate degree in a relevant technical or mechanical field.
Location: Quonset, United States
📍
Location:
Quonset, RI
📄
Employment Type:
Contract
🏢
Work Arrangement:
On-site
🚀
Start Date:
TBD
💰
Compensation:
TBD — based on skills and experience
Important Screening Requirements
Technical background in electronics within robotics, defense, aerospace, avionics, or related industries.
Experience preparing, setting up, and executing detailed test procedures.
Ability to read electrical schematics, wiring diagrams, engineering drawings, and technical documentation.
Hands-on experience with digital multimeters (DMMs), oscilloscopes, benchtop power supplies, and function generators.
Must be eligible to obtain and maintain an active
U.S. Secret security clearance
.
Willingness to support offshore field operations, testing, or vessel trials when required.
About the Role
We are seeking a hands-on
Manufacturing Test Technician
to support the testing, troubleshooting, and integration of complex electromechanical assemblies used in advanced Autonomous Underwater Vehicle (AUV) systems.
This contract opportunity focuses on executing subsystem end-of-line (EOL) tests, inspecting electronic assemblies, diagnosing electrical issues, and supporting pressure vessel production and testing processes.
The successful candidate will work closely with engineering and operations teams to ensure test quality, accurately document results, troubleshoot hardware issues, and help meet production milestones.
What We’re Looking For
We’re looking for a detail-oriented
test technician with a strong electronics background
and practical experience executing test procedures in a manufacturing or technical environment.
The ideal candidate can independently operate electrical test equipment, interpret schematics and engineering drawings, diagnose circuit-level issues, and maintain accurate test documentation.
Strong candidates will combine hands-on testing and troubleshooting skills with a commitment to safety, quality, and continuous improvement. Experience with subsea robotics, underwater systems, or pressure vessel testing is a plus.
Key Responsibilities
Testing & System Integration
Support pressure vessel assembly and testing as part of AUV integration.
Build, test, and integrate complex electrical and mechanical assemblies.
Execute subsystem
end-of-line (EOL) tests
according to established procedures and documentation.
Prepare, configure, and execute detailed test procedures to verify assembly performance.
Configure devices by flashing and loading specified software and firmware versions.
Support testing and integration activities to meet production requirements.
Electronics Inspection & Troubleshooting
Perform incoming quality inspection testing on printed circuit board assemblies (PCBAs).
Troubleshoot, diagnose, and repair electrical and electronic circuits down to the component level.
Use digital multimeters, oscilloscopes, benchtop power supplies, and function generators to investigate electrical issues.
Interpret electrical schematics, wiring diagrams, engineering drawings, and technical documentation.
Identify hardware issues and support corrective actions to maintain product quality.
Pressure Vessel Production & Process Improvement
Support the refinement, documentation, and continuous improvement of pressure vessel production and test processes.
Assist with testing and troubleshooting activities related to pressure vessel systems.
Follow established procedures and technical specifications throughout manufacturing and testing.
Contribute to improvements in test efficiency, consistency, and reliability.
Quality, Documentation & Safety
Maintain
5S standards
across test benches and work areas.
Perform physical part inspections and close out assigned work orders.
Accurately document test procedures, results, and identified issues.
Follow facility safety protocols and established testing procedures.
Maintain test integrity and attention to detail throughout all assigned activities.
Equipment & Laboratory Support
Support equipment upkeep and calibration tracking.
Maintain tooling organization and laboratory inventory.
Keep test benches and work areas organized and ready for testing.
Help ensure test equipment and tools are maintained appropriately.
Offshore Operations & Field Testing
Support offshore field operations, testing, or vessel trials when required.
Assist with troubleshooting and testing during field activities.
Follow applicable safety procedures during operational support.
Required Qualifications
Solid electronics background in a relevant technical industry.
Demonstrated experience preparing and executing detailed test procedures.
Working knowledge of electrical engineering concepts and circuit theory.
Ability to read and work from technical documentation, electrical schematics, wiring diagrams, and engineering drawings.
Hands-on proficiency with standard electrical test equipment, including:
Digital multimeters (DMMs)
Oscilloscopes
Benchtop power supplies
Function generators
Strong attention to detail, documentation, organization, and test integrity.
Ability to work independently, adapt to changing priorities, and meet deadlines.
Strong written and verbal communication skills.
Eligibility to obtain and maintain an active U.S. Secret security clearance.
Willingness to support offshore field operations, testing, or vessel trials when required.
Preferred Qualifications
Experience with
subsea robotics, AUVs, UUVs, or underwater equipment
.
Experience safely handling electrical systems up to
400 VDC
.
Subsea cable splicing, potting, or custom wire harness fabrication experience.
Experience with hydrostatic test setups, pressure vessels, or high-pressure pneumatic and hydraulic systems.
Current or previous
IPC-A-610 and/or IPC/WHMA-A-620 certifications
.
Experience in low-volume, high-mix manufacturing or prototype-to-production environments.
Location: Quonset, United States
📍
Location:
Quonset, RI
📄
Employment Type:
Contract
🏢
Work Arrangement:
On-site
🚀
Start Date:
TBD
💰
Compensation:
TBD — based on skills and experience
Important Screening Requirements
4–12 years of relevant electronics technician experience
in robotics, defense, avionics, or related fields.
Experience with complex electromechanical assemblies, tight-tolerance components, enclosures, and wire routing.
Ability to read electrical schematics, engineering drawings, and technical documentation.
Hands-on electrical debugging experience using digital multimeters, oscilloscopes, or similar equipment.
Understanding of electrical engineering principles and the manufacturing lifecycle.
Must be eligible to obtain and maintain an active
U.S. Secret security clearance
.
Willingness to support offshore operations travel if required by the contract.
About the Role
We are seeking a hands-on
Electronics Technician
to support the assembly, testing, and integration of advanced Autonomous Underwater Vehicle (AUV) systems.
This contract opportunity involves working with complex electrical and electromechanical assemblies while collaborating with engineering and manufacturing teams to support production and delivery milestones.
The successful candidate will have practical electronics assembly and troubleshooting experience, strong attention to detail, and the ability to follow engineering specifications while contributing to the reliable production of advanced underwater systems.
What We’re Looking For
We’re looking for an experienced
electronics technician
who can build, test, integrate, and troubleshoot complex electrical assemblies in a manufacturing environment.
The ideal candidate is comfortable working with intricate wiring harnesses, soldering electronic modules and printed circuit board assemblies (PCBAs), reading technical documentation, and using electrical test equipment to identify and resolve issues.
Candidates with backgrounds in defense, robotics, avionics, subsea systems, or low-volume, high-mix manufacturing are encouraged to apply.
Key Responsibilities
Electronics Assembly & Integration
Build, test, and integrate complex electrical assemblies into AUV platforms.
Support pressure vessel fabrication and assembly as part of overall AUV production integration.
Perform detailed electromechanical assembly involving tight tolerances, complex components, enclosures, and wire routing.
Fabricate complex wire harnesses and solder electronic modules and printed circuit board assemblies (PCBAs).
Modify commercial off-the-shelf (COTS) components to support manufacturing and integration requirements.
Electrical Testing & Troubleshooting
Perform electrical debugging using digital multimeters, oscilloscopes, and other relevant test equipment.
Troubleshoot electrical and electromechanical assemblies during manufacturing and integration.
Configure devices by flashing or loading the correct software and firmware versions.
Follow electrical documentation and engineering specifications to ensure compliance and product quality.
Fabrication, Tooling & Process Improvement
Design, prototype, and scale manufacturing jigs and fixtures to improve assembly and test efficiency.
Help develop, document, and improve pressure vessel production processes.
Support manufacturing workflow improvements and production requirements.
Provide technical feedback to engineering and manufacturing teams.
Quality, Documentation & Manufacturing Operations
Maintain organized work areas using
5S practices
.
Perform part inspections, close work orders, and follow established safety procedures.
Support tool and equipment maintenance and calibration tracking.
Assist with raw material inventory management.
Follow engineering drawings, electrical schematics, work instructions, and technical documentation.
Maintain high standards of organization, accountability, and product quality.
Offshore Operations Support
Provide offshore operational support when required under the contract scope.
Assist with field activities related to advanced underwater systems.
Follow applicable technical and safety procedures during operational support.
Required Qualifications
4–12 years of relevant electronics technician experience.
Ability to perform detailed electromechanical assembly work involving tight tolerances and complex wire routing.
Familiarity with electrical engineering principles and concepts.
Strong understanding of the manufacturing lifecycle.
Experience working from technical documentation, electrical schematics, and engineering drawings.
Hands-on electrical debugging experience using equipment such as digital multimeters and oscilloscopes.
Strong attention to detail, organization, accountability, and product quality.
Excellent written and verbal communication skills.
Ability to work with urgency and adapt to changing priorities.
Eligibility to obtain and maintain an active U.S. Secret security clearance.
Willingness to support offshore operations travel if required by the contract.
Preferred Qualifications
Experience with
subsea robotics, AUVs, UUVs, or underwater equipment
.
Experience working with electrical systems up to
400 VDC
.
Avionics experience.
Subsea cable splicing or fabrication experience.
Experience with pressure vessels, pressure systems, or related equipment.
IPC-A-610 and/or IPC/WHMA-A-620 certification
.
Familiarity with JIRA, Teamcenter, NetSuite, or equivalent systems.
Experience in low-volume, high-mix manufacturing environments.
Location: Quonset, United States
📍
Location:
Quonset, RI
📄
Employment Type:
Contract
🏢
Work Arrangement:
On-site
🚀
Start Date:
TBD
💰
Compensation:
TBD — based on skills and experience
Important Screening Requirements
3+ years of relevant mechanical assembly experience
in automotive, marine, aerospace, industrial equipment, or related fields.
Hands-on experience assembling, maintaining, and troubleshooting electromechanical systems.
Ability to work from technical documentation, work instructions, and engineering drawings.
Familiarity with fabrication processes, hand tools, and power tools.
Must be eligible to obtain and maintain an active
U.S. Secret security clearance
.
Willingness to support offshore field operations and testing when required.
About the Role
We are seeking a hands-on
Manufacturing Technician – Vehicle Integration
to support the assembly and integration of advanced autonomous underwater vehicle (AUV) systems.
This contract opportunity focuses on building complex electromechanical assemblies, installing high-reliability wiring and cable harnesses, fabricating components, and supporting manufacturing activities from development through final hardware integration.
The successful candidate will work closely with engineering and technical teams to maintain assembly quality, improve manufacturing workflows, troubleshoot hardware, and help meet project milestones.
What We’re Looking For
We’re looking for a dependable, detail-oriented
manufacturing technician
with practical mechanical assembly and electromechanical integration experience.
The ideal candidate can interpret engineering drawings and work instructions, use fabrication tools safely, troubleshoot complex hardware, and contribute to improving production efficiency and build quality.
Candidates with backgrounds in aerospace, automotive, marine systems, industrial equipment, or related manufacturing environments are encouraged to apply. Experience with underwater robotics or autonomous underwater vehicles is a plus.
Key Responsibilities
Assembly & Vehicle Integration
Collaborate with engineers and technical specialists on AUV assembly and integration.
Build, integrate, and test complex electromechanical assemblies.
Support vehicle development and manufacturing activities.
Assist with final hardware integration and ensure assemblies meet technical specifications.
Provide technical feedback to engineering teams to support product improvements.
Wiring & Electrical Integration
Route, install, and service high-reliability cabling and wiring harnesses.
Support the integration of electrical and electromechanical components.
Troubleshoot assembly and hardware issues during manufacturing and testing.
Follow technical documentation and established procedures when working with electrical components.
Fabrication, Tooling & Manufacturing Support
Design, prototype, and build manufacturing jigs and fixtures to improve build quality and test efficiency.
Fabricate and modify machined parts and commercial off-the-shelf (COTS) components.
Use hand tools, power tools, and standard fabrication processes to support assembly activities.
Assist in developing and improving manufacturing methods and assembly processes.
Process Improvement & Documentation
Help develop, document, and optimize assembly and build workflows.
Identify opportunities to improve production efficiency, consistency, and quality.
Follow engineering drawings, work instructions, and technical specifications.
Maintain organized manufacturing work areas and support the smooth flow of production activities.
Field Operations & Testing
Support offshore field operations and testing when required.
Assist with vehicle testing and hardware troubleshooting.
Follow applicable safety procedures during manufacturing, integration, and field activities.
Required Qualifications
3+ years of relevant mechanical or assembly experience.
Familiarity with fabrication processes, hand tools, power tools, and plastic or metal component manufacturing.
Experience working from technical documentation, work instructions, and engineering drawings.
Hands-on experience assembling, maintaining, and troubleshooting electromechanical systems.
Understanding of hardware manufacturing lifecycles.
Strong collaboration and communication skills.
High attention to detail, dependability, and accountability for build quality.
Ability to adapt to changing priorities and meet project deadlines.
Eligibility to obtain and maintain an active U.S. Secret security clearance.
Willingness to support offshore field operations and testing when required.
Preferred Qualifications
Experience with
subsea robotics, AUVs, UUVs, or marine and underwater systems
.
Material handling or hoisting experience, including overhead gantry operations or rigging.
Experience working safely around electrical components up to
400 VDC
.
Experience using electrical debugging equipment, such as digital multimeters.
Manual or CNC machining experience.
Experience with 3D printing.
Background in aerospace, automotive, marine, or industrial equipment manufacturing.
Location: United States
ABOUT THE ASSIGNMENT
The Contract Lead R&D Technician facilitates daily workflow and task allocation for technical builds, setting operational priorities and assigning tasks based on dynamic project needs. This hands-on role actively supports the assembly, integration, and troubleshooting of complex AUVs and electromechanical systems while rigorously adhering to all safety protocols. The contractor serves as a primary technical point of contact, interfacing regularly with engineering teams to provide vital technical feedback and progress updates, and aligning with production stakeholders to meet milestone requirements.
WHAT YOU’LL DO
· Contribute to all stages of the vehicle product development and manufacturing life cycle, providing technical feedback to the engineering team.
· Build, integrate, and test complex electro-mechanical assemblies into world-class AUV systems.
· Apply competency in the use of hand tools, assembly tooling, and general manufacturing equipment.
· Complete necessary transactions in computer production systems (MES, NetSuite, JIRA) on a daily basis.
· Provide technical guidance, knowledge transfer, and process support to operators as needed.
· Maintain focus and momentum to drive milestones to on-time completion.
· Manage multiple priorities, organize build workflows, and meet scheduled project deadlines.
· Interface with the Production Supervisor and collaborate with other technicians, providing day-to-day technical task coordination for the production and delivery of various commercial and development products.
· Apply advanced knowledge and skills in hardware assembly, troubleshooting, and repair during manufacturing operations.
· Coordinate workflow priorities for operators to achieve target on-time delivery goals and ensure project milestones stay on schedule.
· Participate in 5S and continuous improvement initiatives; provide constructive feedback on ways to optimize the assembly process.
· Foster a collaborative working environment that supports technical excellence, knowledge sharing, and cross-functional support.
REQUIRED QUALIFICATIONS
· 7+ years of electronics experience in an R&D/prototyping environment.
· Demonstrated ability to execute complex R&D tasks independently with minimal direct oversight.
· Extensive experience building and troubleshooting cables, harnesses, and connectors.
· Proficiency in soldering, crimping, and mechanical cable assembly.
· Working knowledge of the product life cycle (NPI to scaled production) and LEAN manufacturing principles.
· Highly organized, dependable, and detail-oriented with strong written and verbal communication skills.
· Familiarity reading and interpreting electrical schematics and component drawings.
· Hands-on experience with standard electronics test equipment (power supplies, electronic loads, oscilloscopes, function generators, DAQ systems, and measurement sensors).
· Ability to adapt quickly between tasks and balance concurrent technical priorities in a fast-paced environment.
· Eligibility to obtain and maintain an active U.S. Secret security clearance.
PREFERRED QUALIFICATIONS
· Experience with machining, sheet metal fabrication, and 3D printing.
· Demonstrated ability to collaborate effectively across cross-functional engineering and manufacturing teams.
· Experience testing items ranging from small integrated electronics assemblies to large vehicle structures.
· Experience building test setups and executing test procedures to validate design iterations.
· Prior material handling/hoisting experience or MA state hoisting license (overhead gantry, rigging).
· Prior experience in subsea robotics (AUVs, UUVs, or marine/underwater systems).
Contract Rate:
$41.00 – $54.00/hr (dependent on experience)
Location: United States
We are seeking an experienced Contract Pressure Vessel Test Technician to operate and maintain the on-site hydrostatic test chamber, executing pressure testing on sealed vessels, housings, and pressurized components utilized in autonomous underwater vehicles (AUVs). These undersea platforms are flooded vehicle architectures, requiring electronics and water-sensitive subsystems to be housed inside individually sealed, pressurized enclosures.
This contract engagement is responsible for validating the structural integrity and watertight sealing of these enclosures before integration into production hardware. The contractor will set up and execute technical test procedures, record and monitor pressure data, generate documentation packages, and interface directly with production and engineering stakeholders to confirm parts meet strict engineering specifications.
SCOPE OF WORK (CONTRACT DELIVERABLES)
· Hydrostatic Test Execution: Set up, operate, and monitor the hydrostatic test chamber to perform pressure testing on sealed vessels, housings, and related components. Follow established procedures to pressurize components to specified proof levels, maintain dwell times, and continuously monitor for pressure decay or leakage.
· Test Setup and Fixturing: Prepare test articles by installing necessary fittings, plugs, seals, sensors, and fluid interfaces. Verify fixture and test setups prior to pressurization. Maintain and stage testing fixtures, high-pressure tooling, and supporting hardware.
· Inspection and Anomaly Identification: Visually inspect components before, during, and after test sequences for leaks, seal degradation, weld flaws, structural
anomalies, or other non-conformances. Accurately document and isolate all non-conforming conditions.
· Data Recording and Quality Documentation: Maintain rigorous records of all test parameters, cycles, results, and observed conditions. Complete test logs, formal reports, and quality system documentation in accordance with standard operating procedures. Interpret precision pressure gauges and sensor data to ensure testing integrity.
· Equipment Maintenance and Calibration Tracking: Perform routine preventative maintenance on the chamber, pumps, valves, high-pressure lines, and instrumentation. Flag equipment requiring repair, overhaul, or recalibration.
· Safety and Environmental Compliance: Maintain strict compliance with safety guidelines governing high-pressure pneumatic and hydrostatic operations. Maintain clean and organized test bays, and promptly report any process anomalies or equipment hazards.
· Cross-Functional Collaboration: Interface with production teams, quality assurance, and engineering personnel to align test schedules, communicate test outcomes, and assist in root-cause isolation for failed units. Provide technical feedback regarding recurring build anomalies or design considerations.
· Process Improvement Support: Contribute technical input to improve test documentation, fixturing design, cycle times, and chamber throughput.
REQUIRED QUALIFICATIONS
· 4+ years of hands-on experience in testing, inspection, or manufacturing assembly environments.
· Demonstrated experience with high-pressure testing (hydrostatic or pneumatic), leak detection methods, or comparable quality-verification testing.
· Proficiency in reading and working directly from technical documentation, engineering drawings, and detailed test plans.
· Strong procedural discipline and attention to detail when executing tests and recording empirical data.
· Demonstrated mechanical aptitude working with high-pressure systems, pumps, high-pressure fittings, fluid manifolds, and instrumentation gauges.
· Effective technical communication skills, both written and verbal, for documenting test reports and conveying results to engineering teams.
· Eligible to obtain and maintain an active U.S. Secret security clearance.
PREFERRED QUALIFICATIONS
· Background in maritime, aerospace, or defense manufacturing environments.
· Hands-on experience with hydrostatic proof, leak, or burst testing of sealed electronic enclosures or pressure hulls.
· Familiarity with subsea robotics, AUVs, UUVs, or marine equipment.
· Active or prior VT (Visual Testing) or PT (Penetrant Testing) inspection credentials.
· Experience utilizing ERP or MES platforms for work order tracking and test data logging.
· Current or previous certifications in overhead crane operation, rigging, or confined spaces.
· Technical certificate, trade diploma, or Associate degree in a relevant technical or mechanical discipline.
Contract Rate:
$28.00 – $37.00/hour (commensurate with demonstrated skills and experience)
Location: United States
ABOUT THE JOB
We are looking for an Electronics Technician to join our team in Quonset, RI on a contract basis to support our Dive-XL platform. In this role, you will be working on cutting-edge technology aimed at advancing the state-of-the-possible in subsea robotics. You will play a key role in delivering our AUVs to our customers by working hands-on with our engineering team in a multi-disciplinary environment to scale our AUV production globally. This role will include building complex electromechanical assemblies.
WHAT YOU'LL DO
· Work within a team of multidisciplinary engineers and operations personnel on pressure vessel fabrication and assembly as part of overall AUV production integration
· Fabricate complex wire harnesses, solder electronic modules (including PCBAs), and modify COTS components
· Perform configuration tasks to flash/load correct SW/FW versions onto devices
· Build, test, and integrate complex electrical assemblies into our world-class AUVs
· Design, prototype, and scale manufacturing jigs and fixtures to improve build and test efficiency
· Follow detailed electrical and manufacturing documentation to build to engineering specifications
· Help develop, document, and improve the pressure vessel production process
· 5S work areas, perform part inspections, close out work orders, and follow safety best practices
· Support management of tools, equipment, and lab supplies (maintenance, calibrations, raw material stock)
· Potential for travel offshore to support operations team as needed under the contract scope
REQUIRED QUALIFICATIONS
· 4-12 years of relevant electronics technician experience in fields such as Robotics, Defense, or Avionics
· Capable of carrying out detailed electro-mechanical assembly work with tight-tolerance components/enclosures and complex wire routings
· Familiarity with electrical engineering principles and concepts
· Full understanding of the manufacturing life cycle
· Experience working off of technical documentation, electrical schematics, and engineering drawings
· Commitment to a high-quality product and strong sense of personal accountability
· Ability to perform electrical debug including use of tools such as a digital multimeter, oscilloscope, etc.
· Extremely organized and detail-oriented
· Excellent verbal & written communication skills
· Strong sense of urgency and enthusiasm
· Eligible to obtain and maintain an active U.S. Secret security clearance
PREFERRED QUALIFICATIONS
· Experience in sub-sea robotics (AUVs, UUVs, underwater equipment)
· Experience working with electrical systems up to 400VDC
· Experience working in avionics
· Subsea cable splicing or fabrication experience
· Experience with pressure vessels and/or pressure systems/equipment
· IPC 610 and/or 620 Certification
· Prior experience working with JIRA, Teamcenter (PLM), or NetSuite (ERP) or equivalent
· Experience with low volume/high mix manufacturing
CONTRACT TERMS
This is a contract (non-FTE) position with compensation paid on an hourly basis. Contract duration, renewal, and scope will be defined per the terms of the engagement agreement.
US Hourly Range
· 4–8 years of experience: $28 - $37/hour
· 8–12 years of experience: $32 - $42/hour
Hourly rate will be tailored to your individual qualifications, including job-related knowledge, skills, education, and experience, consistent with contract pay practices.
Location: United States
ABOUT THE ASSIGNMENT
We are seeking an experienced Contract Manufacturing Test Technician to support operations in Quonset, RI. In this engagement, you will work hands-on with cutting-edge technology aimed at advancing the state-of-the-possible in subsea robotics. You will support customer delivery milestones by interfacing with the engineering and operations teams in a multidisciplinary environment to assist in scaling AUV production. This contract scope focuses on executing tests on complex electromechanical assemblies and integrating verified hardware into final platforms.
SCOPE OF WORK (DELIVERABLES)
· Collaborate with multidisciplinary engineering and operations personnel on pressure vessel assembly and testing as part of overall AUV integration milestones.
· Perform device configuration tasks, including flashing and loading specified SW/FW versions onto target hardware.
· Build, test, and integrate complex electrical and mechanical assemblies into AUV systems.
· Execute detailed subsystem End-of-Line (EOL) tests according to prepared test procedures and documentation.
· Conduct incoming quality inspection testing on printed circuit board assemblies (PCBAs).
· Troubleshoot, diagnose, and repair electrical, electronic, and integrated circuits down to the component level.
· Support the refinement, documentation, and continuous improvement of pressure vessel production and test processes.
· Maintain 5S standards across test benches/work areas, conduct physical part inspections, close out assigned work orders, and adhere strictly to facility safety protocols.
· Assist with equipment upkeep, calibration tracking, tooling organization, and lab inventory maintenance.
· Provide potential travel support for offshore field operations, testing, or vessel trials as project requirements dictate.
REQUIRED QUALIFICATIONS
· Solid technical background in electronics within relevant industries (Robotics, Defense, Aerospace, Avionics).
· Proven track record of preparing, setting up, and executing rigorous test procedures with high attention to detail.
· Working knowledge of core electrical engineering concepts and circuit theory.
· Proficiency in reading and working directly from technical documentation, electrical schematics, wiring diagrams, and engineering drawings.
· Demonstrated commitment to hardware reliability, test integrity, and personal accountability for deliverables.
· Hands-on proficiency with standard electrical test equipment (DMMs, oscilloscopes, benchtop power supplies, function generators, etc.).
· Strong organizational, documentation, and detail-oriented technical execution skills.
· Clear and effective written and verbal communication skills.
· Ability to work independently with initiative, adaptability, and high drive toward project deadlines.
· Eligible to obtain and maintain an active U.S. Secret security clearance.
PREFERRED QUALIFICATIONS
· Prior experience in subsea robotics (AUVs, UUVs, or marine/underwater equipment).
· Demonstrated experience safely handling electrical systems operating up to 400VDC.
· Hands-on subsea cable splicing, potting, or custom harness fabrication experience.
· Experience with hydrostatic test setups, pressure vessels, and/or high-pressure pneumatic/hydraulic systems.
· Current or past IPC-A-610 and/or IPC/WHMA-A-620 certifications.
· Familiarity with low-volume, high-mix (LVHM) or prototype-to-production manufacturing environments.
CONTRACT HOURLY RATES
· $25.00 – $37.00/hour (commensurate with demonstrated skills and experience)
Location: United States
ABOUT THE ASSIGNMENT
We are seeking a Contract Manufacturing (Vehicle Integration) Technician to support operations in Quonset, RI. In this engagement, you will collaborate hands-on with the engineering team across a multidisciplinary workflow to deliver world-class AUV systems. This assignment focuses on assembling complex electromechanical systems and integrating them into final operational hardware.
SCOPE OF WORK (DELIVERABLES)
· Collaborate with a multidisciplinary team of engineers and technical specialists on AUV assembly and integration efforts.
· Build, integrate, and test complex electro-mechanical assemblies into advanced AUV platforms.
· Route, install, and service high-reliability cabling and wiring harnesses.
· Design, prototype, and build manufacturing jigs and fixtures to improve build quality and test efficiency.
· Fabricate and modify machined parts and COTS (commercial off-the-shelf) components as needed.
· Support all phases of the vehicle development and manufacturing lifecycle, providing direct technical feedback to engineering.
· Assist in developing, documenting, and optimizing assembly and build workflows.
· Support the organization, maintenance, and flow of on-site manufacturing areas.
· Provide potential offshore travel support for field operations and testing as required.
REQUIRED QUALIFICATIONS
· 3+ years of relevant mechanical/assembly experience (automotive, marine, aerospace, or industrial equipment).
· Familiarity with standard fabrication processes, basic hand and power tools, and plastic/metal component manufacturing.
· Demonstrated ability to work collaboratively, professionally, and cross-functionally.
· Solid foundational understanding of hardware manufacturing life cycles.
· Demonstrated experience working from technical documentation, work instructions, and engineering drawings.
· Commitment to high build quality and personal accountability for deliverables.
· Hands-on experience assembling, maintaining, and troubleshooting electromechanical systems.
· Highly organized, detail-oriented, and dependable.
· Strong verbal and written technical communication skills.
· High level of initiative, adaptability, and focus on meeting project timelines.
· Eligible to obtain and maintain an active U.S. Secret security clearance.
PREFERRED QUALIFICATIONS
· Prior experience in subsea robotics (AUVs, UUVs, or marine/underwater systems).
· Prior material handling/hoisting experience or MA/RI state hoisting credentials (overhead gantry, rigging).
· Experience working safely around electrical components up to 400VDC.
· Proficiency with electrical debugging and test equipment, such as digital multimeters.
· Manual/CNC machining and/or 3D printing experience.
CONTRACT HOURLY RATES
$25.00 – $37.00/hour (commensurate with demonstrated skills and experience)
Location: Quincy, United States
WHAT YOU’LL DO
Contribute to all stages of the vehicle product development and manufacturing life cycle, providing technical feedback to the engineering team.
Build, integrate, and test complex electro-mechanical assemblies into world-class AUV systems.
Apply competency in the use of hand tools, assembly tooling, and general manufacturing equipment.
Complete necessary transactions in computer production systems (MES, NetSuite, JIRA) on a daily basis.
Provide technical guidance, knowledge transfer, and process support to operators as needed.
Maintain focus and momentum to drive milestones to on-time completion.
Manage multiple priorities, organize build workflows, and meet scheduled project deadlines.
Interface with the Production Supervisor and collaborate with other technicians, providing day-to-day technical task coordination for the production and delivery of various commercial and development products.
Apply advanced knowledge and skills in hardware assembly, troubleshooting, and repair during manufacturing operations.
Coordinate workflow priorities for operators to achieve target on-time delivery goals and ensure project milestones stay on schedule.
Participate in 5S and continuous improvement initiatives; provide constructive feedback on ways to optimize the assembly process.
Foster a collaborative working environment that supports technical excellence, knowledge sharing, and cross-functional support.
REQUIRED QUALIFICATIONS
7+ years of electronics experience in an R&D/prototyping environment.
Demonstrated ability to execute complex R&D tasks independently with minimal direct oversight.
Extensive experience building and troubleshooting cables, harnesses, and connectors.
Proficiency in soldering, crimping, and mechanical cable assembly.
Working knowledge of the product life cycle (NPI to scaled production) and LEAN manufacturing principles.
Highly organized, dependable, and detail-oriented with strong written and verbal communication skills.
Familiarity reading and interpreting electrical schematics and component drawings.
Hands-on experience with standard electronics test equipment (power supplies, electronic loads, oscilloscopes, function generators, DAQ systems, and measurement sensors).
Ability to adapt quickly between tasks and balance concurrent technical priorities in a fast-paced environment.
Eligibility to obtain and maintain an active U.S. Secret security clearance.
PREFERRED QUALIFICATIONS
Experience with machining, sheet metal fabrication, and 3D printing.
Demonstrated ability to collaborate effectively across cross-functional engineering and manufacturing teams.
Experience testing items ranging from small integrated electronics assemblies to large vehicle structures.
Experience building test setups and executing test procedures to validate design iterations.
Prior material handling/hoisting experience or MA state hoisting license (overhead gantry, rigging).
Prior experience in subsea robotics (AUVs, UUVs, or marine/underwater systems).
Location: Quonset Point, United States
SCOPE OF WORK
Hydrostatic Test Execution:
Set up, operate, and monitor the hydrostatic test chamber to perform pressure testing on sealed vessels, housings, and related components. Follow established procedures to pressurize components to specified proof levels, maintain dwell times, and continuously monitor for pressure decay or leakage.
Test Setup and Fixturing:
Prepare test articles by installing necessary fittings, plugs, seals, sensors, and fluid interfaces. Verify fixture and test setups prior to pressurization. Maintain and stage testing fixtures, high-pressure tooling, and supporting hardware.
Inspection and Anomaly Identification:
Visually inspect components before, during, and after test sequences for leaks, seal degradation, weld flaws, structural anomalies, or other non-conformances. Accurately document and isolate all non-conforming conditions.
Data Recording and Quality Documentation:
Maintain rigorous records of all test parameters, cycles, results, and observed conditions. Complete test logs, formal reports, and quality system documentation in accordance with standard operating procedures. Interpret precision pressure gauges and sensor data to ensure testing integrity.
Equipment Maintenance and Calibration Tracking:
Perform routine preventative maintenance on the chamber, pumps, valves, high-pressure lines, and instrumentation. Flag equipment requiring repair, overhaul, or recalibration.
Safety and Environmental Compliance:
Maintain strict compliance with safety guidelines governing high-pressure pneumatic and hydrostatic operations. Maintain clean and organized test bays, and promptly report any process anomalies or equipment hazards.
Cross-Functional Collaboration:
Interface with production teams, quality assurance, and engineering personnel to align test schedules, communicate test outcomes, and assist in root-cause isolation for failed units. Provide technical feedback regarding recurring build anomalies or design considerations.
Process Improvement Support:
Contribute technical input to improve test documentation, fixturing design, cycle times, and chamber throughput.
REQUIRED QUALIFICATIONS
4+ years of hands-on experience in testing, inspection, or manufacturing assembly environments.
Demonstrated experience with high-pressure testing (hydrostatic or pneumatic), leak detection methods, or comparable quality-verification testing.
Proficiency in reading and working directly from technical documentation, engineering drawings, and detailed test plans.
Strong procedural discipline and attention to detail when executing tests and recording empirical data.
Demonstrated mechanical aptitude working with high-pressure systems, pumps, high-pressure fittings, fluid manifolds, and instrumentation gauges.
Effective technical communication skills, both written and verbal, for documenting test reports and conveying results to engineering teams.
Eligible to obtain and maintain an active U.S. Secret security clearance.
PREFERRED QUALIFICATIONS
Background in maritime, aerospace, or defense manufacturing environments.
Hands-on experience with hydrostatic proof, leak, or burst testing of sealed electronic enclosures or pressure hulls.
Familiarity with subsea robotics, AUVs, UUVs, or marine equipment.
Active or prior VT (Visual Testing) or PT (Penetrant Testing) inspection credentials.
Experience utilizing ERP or MES platforms for work order tracking and test data logging.
Current or previous certifications in overhead crane operation, rigging, or confined spaces.
Technical certificate, trade diploma, or Associate degree in a relevant technical or mechanical discipline.
Location: Quonset Point, United States
WHAT YOU'LL DO
Work within a team of multidisciplinary engineers and operations personnel on pressure vessel fabrication and assembly as part of overall AUV production integration
Fabricate complex wire harnesses, solder electronic modules (including PCBAs), and modify COTS components
Perform configuration tasks to flash/load correct SW/FW versions onto devices
Build, test, and integrate complex electrical assemblies into our world-class AUVs
Design, prototype, and scale manufacturing jigs and fixtures to improve build and test efficiency
Follow detailed electrical and manufacturing documentation to build to engineering specifications
Help develop, document, and improve the pressure vessel production process
5S work areas, perform part inspections, close out work orders, and follow safety best practices
Support management of tools, equipment, and lab supplies (maintenance, calibrations, raw material stock)
Potential for travel offshore to support operations team as needed under the contract scope
REQUIRED QUALIFICATIONS
4-12 years of relevant electronics technician experience in fields such as Robotics, Defense, or Avionics
Capable of carrying out detailed electro-mechanical assembly work with tight-tolerance components/enclosures and complex wire routings
Familiarity with electrical engineering principles and concepts
Full understanding of the manufacturing life cycle
Experience working off of technical documentation, electrical schematics, and engineering drawings
Commitment to a high-quality product and strong sense of personal accountability
Ability to perform electrical debug including use of tools such as a digital multimeter, oscilloscope, etc.
Extremely organized and detail-oriented
Excellent verbal & written communication skills
Strong sense of urgency and enthusiasm
Eligible to obtain and maintain an active U.S. Secret security clearance
PREFERRED QUALIFICATIONS
Experience in sub-sea robotics (AUVs, UUVs, underwater equipment)
Experience working with electrical systems up to 400VDC
Experience working in avionics
Subsea cable splicing or fabrication experience
Experience with pressure vessels and/or pressure systems/equipment
IPC 610 and/or 620 Certification
Prior experience working with JIRA, Teamcenter (PLM), or NetSuite (ERP) or equivalent
Experience with low volume/high mix manufacturing
Location: Quonset Point, United States
SCOPE OF WORK (DELIVERABLES)
Collaborate with multidisciplinary engineering and operations personnel on pressure vessel assembly and testing as part of overall AUV integration milestones.
Perform device configuration tasks, including flashing and loading specified SW/FW versions onto target hardware.
Build, test, and integrate complex electrical and mechanical assemblies into AUV systems.
Execute detailed subsystem End-of-Line (EOL) tests according to prepared test procedures and documentation.
Conduct incoming quality inspection testing on printed circuit board assemblies (PCBAs).
Troubleshoot, diagnose, and repair electrical, electronic, and integrated circuits down to the component level.
Support the refinement, documentation, and continuous improvement of pressure vessel production and test processes.
Maintain 5S standards across test benches/work areas, conduct physical part inspections, close out assigned work orders, and adhere strictly to facility safety protocols.
Assist with equipment upkeep, calibration tracking, tooling organization, and lab inventory maintenance.
Provide potential travel support for offshore field operations, testing, or vessel trials as project requirements dictate.
REQUIRED QUALIFICATIONS
Solid technical background in electronics within relevant industries (Robotics, Defense, Aerospace, Avionics).
Proven track record of preparing, setting up, and executing rigorous test procedures with high attention to detail.
Working knowledge of core electrical engineering concepts and circuit theory.
Proficiency in reading and working directly from technical documentation, electrical schematics, wiring diagrams, and engineering drawings.
Demonstrated commitment to hardware reliability, test integrity, and personal accountability for deliverables.
Hands-on proficiency with standard electrical test equipment (DMMs, oscilloscopes, benchtop power supplies, function generators, etc.).
Strong organizational, documentation, and detail-oriented technical execution skills.
Clear and effective written and verbal communication skills.
Ability to work independently with initiative, adaptability, and high drive toward project deadlines.
Eligible to obtain and maintain an active U.S. Secret security clearance.
PREFERRED QUALIFICATIONS
Prior experience in subsea robotics (AUVs, UUVs, or marine/underwater equipment).
Demonstrated experience safely handling electrical systems operating up to 400VDC.
Hands-on subsea cable splicing, potting, or custom harness fabrication experience.
Experience with hydrostatic test setups, pressure vessels, and/or high-pressure pneumatic/hydraulic systems.
Current or past IPC-A-610 and/or IPC/WHMA-A-620 certifications.
Familiarity with low-volume, high-mix (LVHM) or prototype-to-production manufacturing environments.
seniorMontreal, Canada
УдалённоSainte-Anne-de-Bellevue, Canada; and Canadian citizens; relocation assistance and bonus available for qualified UK and European candidates relocating to Canada; Remote & Relocation Opportunities; Relocation assistance and a relocation bonus are available for qualified candidates willing to relocate to Canada
Не хотите искать каждый день?
Настройте подбор один раз, и подходящие вакансии будут сами приходить в Telegram.
Настройте подбор, и подходящие вакансии будут приходить в Telegram.
