Вакансии

Location: Warsaw Workplace: Hybrid ROLE HIGHLIGHTS: Senior Electronics R&D Test Engineer - Location: Warsaw, Poland - Department: Optical Systems - Reports to: Engineering Manager, Optical Systems - Employment type: Permanent - Workplace model: Hybrid - Employment is subject to applicable security screening (incl. SUPO, where required) WHY THIS ROLE MATTERS: As Senior Electronics R&D Test Engineer, you will lead electrical AIT for ICEYE's new generation of optical spacecraft, qualifying subsystems and full satellites and debugging the electronics and software issues that surface along the way. You will build and run the EGSE these campaigns depend on, and feed what you find on the test floor back into the design itself, working closely with the engineering teams responsible for it. WHO WE ARE ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. YOUR DAY-TO-DAY RESPONSIBILITIES - Run subsystem qualification and functional testing, and spacecraft-level system testing, for the new generation of optical satellites. - Debug electronics and software issues as they arise, carrying out root cause analysis on failures. - Design and build the Electronics Ground Support Equipment (EGSE) needed to test and integrate the new spacecraft generation. - Support next-generation spacecraft integration, creating the AIT procedures used to run it and transferring that knowledge to the production team. - Feed testing and integration findings back to the design engineering teams, from early concept through late prototyping, and drive the design changes that come out of it. WHAT WE’RE LOOKING FOR Must haves: - Hands-on experience in the development, integration, testing, or production of complex electronics systems - Strong debugging skills across both electronics and software. - AIT experience spanning both software and electronics. - Working knowledge of Python. - A can-do attitude and willingness to learn. - Comfortable working under pressure and tight timelines, since test and integration campaigns can involve intense, demanding periods. - Strong communication skills in English (written & spoken). Nice to haves: - Experience with environmental testing, such as thermal or vibration testing. - Experience in design-for-manufacturing (DFM) and design-for-testability (DFT) in high-reliability environments. - Experience scaling test systems for production environments. - Experience in harness design APPLICATION PROCESS - Talent Attraction Screening - Hiring Manager Screening - Onsite workshop + Technical discussion - Interview with Leadership WORKING AT ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. HOW WE WORK (OUR VALUES) - Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. BENEFITS Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Warsaw Workplace: Hybrid ROLE HIGHLIGHTS: Electronics R&D Test Lead - Location: Warsaw, Poland - Department: Optical Systems - Reports to: Engineering Manager, Optical Systems - Employment type: Permanent - Workplace model: Hybrid - Employment is subject to applicable security screening (incl. SUPO, where required) WHY THIS ROLE MATTERS: As Electronics R&D Test Lead, you will lead the team responsible for electrical AIT of ICEYE's new generation of optical spacecraft, taking end-to-end ownership of how the team qualifies and tests hardware. You will organize the team's work and lead its people, while staying close to the technical work itself: qualification testing, debugging electronics and software, the EGSE that supports it, and the feedback loop back into design. This is a role for someone who wants to combine hands-on technical ownership with growing into people leadership. WHO WE ARE ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. YOUR DAY-TO-DAY RESPONSIBILITIES - Lead the electrical AIT team, organizing its work and owning the end-to-end electrical AIT process for new spacecraft and subsystems. - Run subsystem qualification and functional testing, and spacecraft-level system testing, for the new generation of optical satellites. - Debug electronics and software issues as they arise, carrying out root cause analysis on failures and reworking PCBAs where needed. - Own the design and build of the Electronics Ground Support Equipment (EGSE) the team relies on for testing and integration. - Support next-generation spacecraft integration, ensuring AIT procedures are created and properly handed over to the production team. - Represent the team's testing and integration findings back to the design engineering groups, from early concept through late prototyping, and drive the resulting design changes. WHAT WE’RE LOOKING FOR Must haves: - Either experience leading people, or a senior, people-oriented technical background with a genuine interest in moving into people leadership. - Hands-on experience in the development, integration, testing, or production of complex electronics systems - Strong debugging skills across both electronics and software. - AIT experience spanning both software and electronics. - Working knowledge of Python. - A can-do attitude and willingness to learn. - Comfortable working under pressure and tight timelines, since test campaigns can involve intense, demanding periods. Nice to haves: - Experience with environmental testing, such as thermal or vibration testing. - Experience in design-for-manufacturing (DFM) and design-for-testability (DFT) in high-reliability environments. - Experience scaling test systems for production environments. - Experience in harness design. APPLICATION PROCESS - Talent Attraction Screening - Hiring Manager Screening - Onsite workshop + Technical discussion - Interview with Leadership WORKING AT ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. HOW WE WORK (OUR VALUES) - Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. BENEFITS Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Montreal, Canada The Satellite-Level Verification and Validation (V&V) Engineer focuses on the highest tier of spacecraft integration, ensuring the fully assembled satellite meets all mission, launch provider, and environmental requirements. Role Overview This role manages the end-to-end verification lifecycle at the highest tier of architecture. It starts at the beginning of the program with verification planning and test methodology design, continues through full-system functional and environmental validation, and concludes with final qualification sign-off and in-orbit initialization readiness. Key Responsibilities & Tasks Verification Architecture & Matrix Ownership: Define the global verification strategy; author the System Verification Plan (SVP) and own the master Verification Control Matrix (VCM) to prove 100% requirement compliance. Method of Compliance (MoC) Definition: Determine the optimal, most cost-effective blend of Verification by Test, Analysis, Demonstration, and Inspection (TADI) for complex mission-level requirements. End-to-End Mission Validation: Design and execute full-system functional tests, "Day-in-the-Life" (DITL) mission simulations, and complex Fault Detection, Isolation, and Recovery (FDIR) validation scenarios. Environmental & Launch Qualification: Define test profiles, pass/fail criteria, and post-test correlation frameworks for full spacecraft environmental campaigns (Thermal Vacuum, Sine-Vibe, Acoustic, Shock). Sign-off & Qualification Review: Lead Technical Review Boards, manage non-conformance reports (NCRs), present compliance evidence at Qualification Reviews (QR), and build the final Flight Readiness data package. Candidate Prerequisites ("Must Haves") Experience: 5+ years in aerospace systems engineering, systems V&V, or space mission qualification roles. Systems Engineering Mastery: Deep understanding of how platform subsystems and digital/RF payloads interact to satisfy top-level mission performance metrics. Requirements Management: Expert-level capability in tracing, decomposing, and closing out complex requirements using enterprise tools like DOORS, Jama, or Windchill. Data Synthesis & Analysis: Advanced skills using Python or MATLAB to parse multi-subsystem telemetry, correlate test data with analytical models, and automate post-test verification reporting.

Location: Montreal, Canada The Platform Systems Verification and Validation (V&V) Engineer focuses on the satellite bus , ensuring the core infrastructure subsystems are fully verified and ready to support the payload. Role Overview This role focuses on the functional verification of the utility subsystems that keep the satellite alive and oriented. It ensures the core platform—including power, thermal control, propulsion, and pointing—operates flawlessly and responds correctly to the onboard flight software. Key Responsibilities & Tasks Bus Subsystem Verification : Test and validate critical platform subsystems, including Attitude Determination and Control (ADCS), Electrical Power Subsystems (EPS), Thermal Control (TCS), and Propulsion. Hardware-in-the-Loop (HIL) : Utilize HIL testbeds to simulate orbital dynamics and sensor inputs (star trackers, GPS, sun sensors) to verify ADCS pointing accuracy. Power & Harness Validation : Perform power budget verification, battery charge/discharge cycle testing, and solar array simulator (SAS) integration. Flight Software (FSW) Interfacing : Test command routing, telemetry packet generation, and fault detection, isolation, and recovery (FDIR) loops. Subsystem Interface Control : Verify that all physical, data (CAN, SpaceWire, RS-422), and electrical interfaces between platform subsystems are compliant. Candidate Prerequisites ("Must Haves") Experience : 5+ years verifying aerospace subsystems, embedded robotics, or satellite platform architectures. Technical Breadth : Strong knowledge of power electronics, orbital mechanics, thermal management, or control systems. Simulators & Automation : Experience with automated test scripting (Python/MATLAB) to control power supplies, loads, and simulated sensor inputs. Protocol Expertise : Familiarity with space-industry data protocols and avionics testing architectures.

Location: Montreal, Canada Role Overview: As a Senior PCB Design Engineer, you will take on a leadership position within our hardware design group. Your key duties will revolve around crafting, executing, and validating mixed-signal (Digital & RF) Printed Circuit Boards (PCBs) customized for application in satellite and other orbital systems. These applications encompass a diverse spectrum, encompassing digital control/processing,  motor drive units,  onboard processors,  and mass-storage units, all of which utilize cutting-edge space technologies. Key Responsibilities: Lead the digital/analog PCB design for space environments. Mentor and oversee junior team members and interns in PCB design. Translate board-level requirements into a comprehensive design concept (incorporating architecture, I/Os, key components, power dissipation estimates, FPGA integration, software integration, etc.). Collaborate closely with FPGA, software, and test designers to finalize functional concepts and streamline integration. Complete or review the schematic capture level design. Identify and manage technology and design risks. Provide guidance to ensure Design for Manufacture/Test in space environments. Supervise and review design layout constraints, parts placement, manufacturing, and assembly drawings. Prepare or review lists of long lead items, bills of materials, and ensure parts qualifications for space. Conduct and review circuit simulations (using tools like SPICE, Hyperlynx, ADS, etc.) and various design analyses (e.g., worst-case scenarios, FMECA). Coordinate with various specialized teams (structural, thermal, packaging, manufacturing, quality assurance, etc.) to conduct necessary reviews for PCB component placement and layout. Oversee board assembly and manufacturing tests. Prepare and review various documents, including review presentations, test plans, test procedures, etc. Lead and guide junior team members in testing, troubleshooting, and debugging complex mixed-signal boards. Provide support for environmental and functional tests and validation for space missions. Report progress and address issues to the program lead or manager. Required Qualifications: Bachelor’s degree in electrical engineering, computer engineering, or equivalent field. Minimum of seven (7) years of experience in designing processor, digital, analog, high-speed, or mixed-signal PCBs. Demonstrated expertise in at least one of these areas of competence. Proficiency in coaching and supervising junior team members and interns. Experience in design architecture and handling multidisciplinary specifications and reviews (FPGA, software, mechanical, etc.). Proficiency in tools/software languages such as Excel spreadsheets, Python, MathCAD, Spice, Matlab, JIRA, etc. Strong understanding of electronic circuits and communication protocols, coupled with extensive PCB design experience. Knowledge of PCB manufacturing processes. Exposure to mechanical packaging is a valuable asset. Experience conducting analyses (FMECA, WCA, signal integrity, power integrity, etc.) using various tools like SPICE, ADS SiPro, Hyperlynx, etc.

Location: Valencia Workplace: OnSite ROLE HIGHLIGHTS: - Role: Manufacturing Engineer - Department: Space Systems - Location: Valencia, Spain - Reports to: Engineering Manager, Space Systems - Working type: Hybrid - Employment is subject to applicable security screening (incl. SUPO, where required) THE MISSION OF THE MANUFACTURING ENGINEER We're looking for a Manufacturing Engineer to join our Space Systems team and own the manufacturability of electronic hardware from prototype through to production. In this role, you'll work closely with electronics designers and PCB manufacturers, reviewing layouts, driving DFM, and resolving fabrication and assembly issues before they become production problems. You'll be the technical bridge between our design engineers and our PCB/PCBA suppliers. This role is perfect for someone who's deeply comfortable with PCB design, fabrication, and assembly processes, and who enjoys catching manufacturability issues early and negotiating them out with suppliers. WHO ARE WE? ICEYE delivers space-based intelligence, surveillance, and reconnaissance (ISR) capabilities to governments and allied nations. This includes sovereign and turnkey ISR missions leveraging ICEYE's world-leading synthetic aperture radar (SAR) satellite technology, as well as access to data from the world's largest SAR satellite constellation. These capabilities enable partners to detect and respond to critical changes anywhere on Earth with unprecedented speed and accuracy – day or night and in any weather, supported by ultra high-resolution imagery and high-frequency revisits. As a trusted partner for defense, intelligence, security, and maritime domain awareness, ICEYE's near real-time data creates a tactical advantage for mission-critical operations. ICEYE operates internationally with offices in Finland, Poland, Spain, Japan, the UAE, Greece, Germany, and the US. The company has more than 900 employees, inspired by the shared vision of improving life on Earth by becoming the global source of truth in Earth Observation. DAY TO DAY RESPONSIBILITIES: - Review schematics and PCB layouts for manufacturability (stackups, routing, power integrity, grounding, impedance control) - DFM/DFA reviews (panelization, drill sizes, annular rings, solder mask, copper balancing) - Review manufacturer DFM reports, negotiate design changes with fabricators/assemblers - Own ECOs arising from manufacturing feedback - Manage PCB/PCBA documentation (Gerbers, ODB++, IPC-2581, BOMs, pick-and-place) - Support test strategy (flying probe, ICT, boundary scan, functional test, AOI, X-ray) - Apply IPC standards to defect/root cause/failure analysis - Evaluate component footprints/packages for assembly risk - Work with fab/SMT partners on soldering, stencil design, surface finishes - Manage PCB/PCBA supplier relationships (risk, issue tracking, scheduling) REQUIREMENTS: MUST HAVE SKILLS: - 3+ years of experience in manufacturing/process engineering within aerospace, defense, or another high-reliability industry. - Degree in Manufacturing, Electrical, Industrial Engineering, or equivalent hands-on experience. - PCB Design Review – Read schematics, review PCB layouts, understand multilayer stackups, evaluate routing, power integrity, grounding, impedance control - PCB Manufacturing (DFM) – Design for Manufacturability (DFM), Design for Assembly (DFA), panelization, fabrication constraints, drill sizes, annular rings, solder mask rules, copper balancing - PCB Quality – IPC standards (IPC-A-600, IPC-6012, IPC-610), defect analysis, root cause analysis, failure analysis - Manufacturing Communication – Review manufacturer DFM reports, answer engineering questions, negotiate design changes, manage engineering change orders (ECOs) - CAD Tools – Any, but in particular Altium Designer - Documentation – Gerbers, ODB++, IPC-2581, fabrication drawings, assembly drawings, BOM management, pick-and-place files - Testing – Flying probe, ICT, boundary scan, functional testing, AOI, X-ray inspection - Component Knowledge – PCB footprints, package types, SMT, through-hole, BGA, fine-pitch components - Manufacturing Process – PCB fabrication, SMT assembly, reflow soldering, wave soldering, stencil design, PCB finishes (ENIG, HASL, OSP) - Project Skills – Supplier management, risk assessment, issue tracking, schedule coordination NICE TO HAVE SKILLS: - Experience in space, defense, or avionics manufacturing environments. - Exposure to ECSS, MIL-STD, or IPC-J-STD-001 (Space Addendum). - Lean Six Sigma certification (Green/Black Belt). - Familiarity with environmental test processes (thermal vacuum, vibration, EMC) as they relate to manufacturing handoff. APPLICATION PROCESS - Talent Acquisition Interview - Hiring Manager Interview - Technical Interview (onsite or virtual), including a Technical Challenge - Hiring Team Interview - Offer Decision WORKING AT ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. HOW WE WORK (OUR VALUES) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. BENEFITS Our benefits are designed to support your health and wellbeing—at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. OUR COMMITMENT TO DIVERSITY, EQUITY AND INCLUSION We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at https://www.iceye.comiceye.com http://iceye.com

Location: Valencia, Spain Workplace: OnSite ROLE HIGHLIGHTS: - Role: Senior Electronics Engineer - Department: Space Systems - Location: Valencia, Spain - Reports to: Engineering Manager, Space Systems - Working type: Hybrid - Employment is subject to applicable security screening (incl. SUPO, where required) THE MISSION OF THE SENIOR ELECTRONICS ENGINEER We’re looking for a Senior Electronics Engineer to join our New Payload Team and help build the next generation of satellite hardware. In this role, you’ll design, test, and maintain the electronic systems that power and control our payloads and avionics subsystems. You’ll contribute across the entire product lifecycle, from early concepts and prototypes through integration, testing, and on-orbit performance. This role is perfect for someone who enjoys solving complex engineering challenges, collaborating with experts across multiple disciplines, and having real ownership over hardware that flies in space. WHO ARE WE? ICEYE delivers space-based intelligence, surveillance, and reconnaissance (ISR) capabilities to governments and allied nations. This includes sovereign and turnkey ISR missions leveraging ICEYE's world-leading synthetic aperture radar (SAR) satellite technology, as well as access to data from the world's largest SAR satellite constellation. These capabilities enable partners to detect and respond to critical changes anywhere on Earth with unprecedented speed and accuracy – day or night and in any weather, supported by ultra high-resolution imagery and high-frequency revisits. As a trusted partner for defense, intelligence, security, and maritime domain awareness, ICEYE's near real-time data creates a tactical advantage for mission-critical operations. ICEYE operates internationally with offices in Finland, Poland, Spain, Japan, the UAE, Greece, Germany, and the US. The company has more than 900 employees, inspired by the shared vision of improving life on Earth by becoming the global source of truth in Earth Observation. DAY TO DAY RESPONSIBILITIES: - Design board-level electronic systems for satellite units and RF boards, with a strong focus on power and control circuits using microcontrollers. - Perform rigorous testing and validation of the electronics you design, ensuring functionality, reliability, and compliance with mission requirements. - Create and maintain clear documentation, including schematics, PCB layouts, test plans, and procedures. - Troubleshoot and resolve issues during design, prototyping, manufacturing, and even in-orbit operations when needed. - Work closely with RF engineers, mechanical engineers, software developers, and other specialists to ensure seamless integration. - Contribute to continuous improvement of design practices, test coverage, and in-orbit performance monitoring. REQUIREMENTS: MUST HAVE SKILLS - 7–10+ years of hands-on experience in electronics engineering, with a strong specialization in analog electronics design. - BSc/MSc in Electronic Engineering or related field. - Proven track record designing low-noise power supplies, timing circuits, and analog signal chains at a senior/expert level. - Significant experience in the space, defense, or avionics industry, having worked on flight or mission-critical hardware. - Strong command of EMI/EMC principles and best practices for noise mitigation. - Demonstrated ability to lead complex analog design efforts and mentor junior engineers. NICE TO HAVE SKILLS - Hands-on experience with space hardware or environmental testing (vibration, thermal, radiation). - Deep understanding of high-speed signals and associated design constraints. - Solid understanding of RF concepts and the interactions between digital, analog, and RF circuitry. - Experience with PCB design tools such as Altium, KiCad, or similar. - Experience working with microcontroller firmware or embedded systems. - Knowledge of root-cause analysis techniques for complex hardware issues. APPLICATION PROCESS - Talent Acquisition Interview - Hiring Manager Interview - Technical Interview (onsite or virtual), including a Technical Challenge - Hiring Team Interview - Offer Decision WORKING AT ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. HOW WE WORK (OUR VALUES) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. BENEFITS Our benefits are designed to support your health and wellbeing—at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. OUR COMMITMENT TO DIVERSITY, EQUITY AND INCLUSION We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at https://www.iceye.comiceye.com http://iceye.com

Location: Montreal, Canada Tasks summary: Architecture Concept & Requirements • Gather functional, performance, pointing, environmental and security requirements from mission stakeholders & CONOPs. • Capture, trace and map payload requirements from mission level to subsystem level • Coordinate with cybersecurity team for payload‑specific assessments • Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Payload Architecture & Design • Design the SAR system architecture (antenna arrays & RF front-end Tx/Rx components, digital beamforming, processing chain and digital electronics, power, thermal, and mass). • Lead the conceptual, preliminary, and detailed design phases, producing trade studies, performance budgets). • Produce Interface Control Documents (ICDs) with other subsystems and ground segment. • Provide system‑level specifications to hardware designers, review schematics, layouts, thermal interfaces, and mechanical constraints Simulation & Analysis • Perform performance simulations for tolerance budgeting and image quality. • Support algorithm and analytical development to process SAR. • Define and maintain Payload DC power budget with utilization models. • Perform FMECA, Fault tree and FDIR, reliability modeling and availability to meet mission objectives Cross‑Functional Coordination, Stakeholder & Program Interaction • Communicate technical status, risk assessments and trade‑study results to senior management and/or customers or partners. • Support payload design authority in System design reviews, Power/Structure/Thermal interfaces and Mission Operations assessments. • Liaise with Electrical, Power, Structures, Thermal, Software, Ground‑Segment and Mission‑Operations teams to resolve integration issues early. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Develop Payload Verification Master Plan covering unit‑test, subsystem‑test, payload‑level test, environmental and electromagnetic compatibility (EMC) test campaigns. • Lead test‑automation framework set‑up, test‑case definition, results analysis and test‑report certification. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns. • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to our client's knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Ensure all artefacts, analysis, firmware, deliverables and documentation are version controlled in PLM environment. • Lead and Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation. • Provide technical support to Mission Operations for routine payload health monitoring, contingency handling and performance trending. • Lead root‑cause investigations for on‑orbit anomalies; update design baselines and lessons‑learned. • Analyze on‑orbit telemetry, update filter parameters, and generate performance reports. • Support SOOH development and associated operator training. Required Qualifications: • B.Sc. in Electrical Engineering, Computer science or Physics with 10 + years of experience supporting SAR remote sensing system development, integration and test on LEO/MEO missions. • Strong technical-writing ability (requirements, ICDs, test procedures, risk reports) and presentation skills; comfortable interfacing with customers, suppliers and senior leadership. • Strong understanding of aerospace system engineering fundamentals. • Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. • Experience with Confluence and JIRA. • Demonstrated capability to efficiently work with little supervision. • Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. • Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Costa Mesa, United States WHAT YOU’LL DO: Utilize first principle methods and design tools to develop new aircraft products Own development of primary and secondary aircraft structural parts and assemblies (metallic and composite) from preliminary design through prototype manufacturing Perform complex modeling and finite element analysis at the detailed component level, major assembly level, and aircraft level (analysis simulations to include strength, buckling, damage tolerance, and delamination) Apply design for manufacturing concepts to create solutions that are cost effective and easy to manufacture at rate Conduct trade studies and perform design and analysis research of complex engineering concepts to determine an optimal solution for weight, performance, manufacturability, cost, and/or schedule Collaborate in a multidisciplinary environment to solve complex, open-ended problems with an emphasis on schedule and cost objectives Coordinate work with mechanical systems, systems integration, aerodynamics, manufacturing, project engineering, and other team members Onsite engineering support at manufacturing and integration sites REQUIRED QUALIFICATIONS B.S. in Aerospace Engineering or Mechanical Engineering, or equivalent experience 5+ years of experience in aerospace or related industry Strong technical knowledge in core engineering principles, fundamental mechanics of composite materials, design, analysis, testing, and fabrication Deep understanding of load paths, design practices, and hand calculations to design robust structurally efficient assemblies Proven ability to design high performance structures and execute their fabrication Self-directed, results oriented, and capable of working in a dynamic environment Excellent time management, organizational, and communication skills Ability to obtain and maintain US DoD Secret Clearance or higher PREFERRED QUALIFICATIONS Experience with clean sheet aircraft configuration Experience with high temperature materials Experience with thermal gradient structural analysis Siemens NX proficiency Experience with fast paced prototype design and manufacture of uncrewed aircraft Experience with high temperature materials selection Prior experience working in high speed programs Hands-on experience with manufacturing Practical aircraft knowledge (pilots license, A&P, etc.)

Location: Montreal, Canada As a Senior Electrical Satellite Systems Engineer, you’ll play a pivotal role in ensuring end-to-end mission success. You will lead the definition, integration, verification, and operational readiness of the satellite electrical architecture — from subsystem trade studies and design reviews to launch and early orbit phases. You’ll act as a technical authority across payload and bus domains, mentoring junior engineers and serving as a trusted point of contact for operators, customers, and launch partners. Key Responsibilities System Design and Development Support ongoing design of electrical subsystems through final flight design, build, and test. Define system requirements and maintain performance budgets across power, data, and reliability. Requirements Management Maintain system requirements, verification, and test matrices from mission level down to subsystems. Technical Analysis Perform and manage analyses including power budgets, failure mode analysis, and reliability. Interface Control Manage interface control documents (ICDs) to ensure proper electrical connections between subsystems. Testing and Verification Develop and oversee execution of test plans and procedures to verify and validate satellite performance through qualification and LEOP phases. Documentation Prepare and maintain design reports, specifications, and verification matrices. Team Leadership Provide technical guidance and mentorship to junior engineers and collaborate with multidisciplinary teams (software, mechanical, ground segment) Supplier and Project Management Oversee subcontractors and vendors to ensure compliance with program requirements. Program Support Participate in major reviews including SRR, PDR, CDR, TRR, PSR, and LRR. Required Skills and Experience Education Bachelor’s or Master’s in Electrical Engineering, Systems Engineering, Aerospace Engineering, or a related field. Experience 15+ years in satellite systems design for LEO constellations, with full lifecycle experience. Technical Expertise Systems Leadership & Architecture Define spacecraft electrical system architecture ensuring optimal payload–bus integration. Develop and maintain system-level documentation (Satellite Reference Database, Parameter Book, CONOPS). Oversee subsystem interfaces for avionics, power, AOCS, propulsion, TT&C, thermal, and data handling. Own requirements management, flow-down, and traceability across the project lifecycle. Conduct gap analyses and ensure subsystem requirements meet mission-level objectives. Design, Verification & Validation Define and validate electrical performance budgets (power, data, fault management). Lead all V&V phases including electrical ground testing (qualification, TVAC, EMC/EMI), and environmental qualification. Drive fault detection, isolation, and recovery (FDIR) strategy and contribute to flight software validation. Oversee system-level integration testing and ensure design compliance. Lead readiness for launch, early orbit, and end-of-rendezvous operations. Operations & Launch Support Interface with launch providers to ensure compliance with integration and environmental requirements. Provide technical leadership during launch campaigns, LEOP, and in-orbit testing. Support Satellite Operations Control Center (SOCC) activities including telemetry, command databases, and anomaly resolution. Stakeholder Communication & Leadership Engage with customers and satellite operators on complex technical matters. Mentor junior engineers and promote systems thinking and disciplined engineering practice. Lead and document design reviews ensuring compliance with ECSS, PUS-STD, and internal standards. Tools & Soft Skills Experience with flight engineering software, Agile methods, and modeling/simulation tools (e.g., MATLAB). Strong written and verbal communication with both technical and non-technical stakeholders. Proven analytical and problem-solving abilities in dynamic, ambiguous environments.

Location: Costa Mesa, United States ABOUT THE TEAM The Air Dominance and Strike Mechanical Engineering Team is responsible for designing and integrating advanced hardware for Group 5 air vehicles and missile platforms . Air Dominance and Strike Mechanical Engineers own the full development lifecycle , from concept generation, to integration and flight test, ensuring high-performance, resilient, and scalable mechanical systems that meet the demands of complex, contested environments. WHAT YOU’LL DO: Develop and integrate hardware on unmanned air vehicles Own designs from concept generation to real world use Use first principles physics as a basis for every decision Lead design reviews, run analysis, visit vendors, define and execute hardware test plans Build prototypes, analyze failures, and transition successful projects into production Support critical hardware demonstrations with customers as needed Travel to test sites as needed REQUIRED QUALIFICATIONS: 5+ years of mechanical engineering experience Advanced Air Vehicles Programs Experience integrating electrical and mechanical subsystems into advanced air vehicles Experience designing mechanical parts (CAD). Understanding of manufacturing methods (machining, sheet metal, composites, 3D printing, injection molding, composite lamination, etc) High competence with, and fluid use of, engineering first principles BS or higher degree in Mechanical, Aerospace, or Electrical Engineering Eligible to obtain and maintain an active U.S. Secret security clearance PREFERRED QUALIFICATIONS Experience in NX/Teamcenter Experience developing aircraft subsystem layouts, performing architectural trade studies, and evaluating vendor performance data Competency in engineering analysis, including structural, thermal, and electrical

Location: Costa Mesa, United States ABOUT THE TEAM The Air Dominance and Strike (AD&S) Electrical Engineering Team is responsible for developing high-reliability avionics, embedded processing, and power systems for Group 5 air vehicles and missile platforms. Working across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable our client's next-generation autonomous air platforms to operate in complex and contested environments. AD&S Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and flight test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern air warfare. ABOUT THE JOB We are looking for an Avionics Engineer to join our rapidly growing team in Costa Mesa, CA . In this role, you will be tasked with working closely with avionics engineers to review and design electrical integration details to ensure details are documented and communicated to all relevant stakeholders. If you are someone who thrives in a fast-paced environment supporting new developments, active deployments, and customer operated hardware, we are looking for you. WHAT YOU WILL DO Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug, and system integration Conduct bring-up and design work on microcontrollers, ensuring seamless integration within the system Troubleshoot issues that span electrical and software boundaries, utilizing both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools} ADDITIONAL LEARNING & DEVELOPMENT OPPORTUNITIES Work in a fast-paced environment supporting new developments, deployments, and customer operated hardware Perform power design, including development and integration of power management systems and components Develop payloads and subsystems (sensors, payload interfaces, power management, and networking) Create system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem Collaborate closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional, mission-critical products Conduct peer-level and cross-discipline design reviews REQUIRED QUALIFICATIONS Bachelor’s Degree in Electrical Engineering or equivalent, with 3+ years of experience designing, testing, and troubleshooting complex system designs Ability to perform power system and electrical loading analysis, simulation, and testing to determine optimal solutions High competence using lab test equipment (benchtop power supplies, electronics loads, oscilloscopes, DMM, logic/spectrum analyzers, etc.) with familiarity of thermal and EMI test chambers and using basic software debugging tools Familiarity with common electrical bus interfaces (CAN, I2C, SPI, Ethernet, RS232/422, RS485, USB) Exceptional organization and communication skills (both written and oral) Eligible to obtain and maintain an active U.S. security clearance Experience with power design and power management systems Hands-on experience with microcontrollers, including bring-up and design work Knowledge of modern analog and digital electronics and electronic circuits Experience designing mixed-signal PCBs with multiple layer counts, layer stackup and impedance matching for power and sensor applications, understanding correct grounding approaches and employing appropriate board protections and filtering Understanding of low voltage and high voltage power electronics and control systems in order to capture system interconnect diagrams and drive cable harnessing designs with proper wire and connector selection PREFERRED QUALIFICATIONS Familiar with high end consumer or military embedded systems design Experience with power systems including batteries and AC power. Develop low-level firmware for bring-up and test Background in defense and missile systems. Comprehensive understanding of the effects of temperature and vibration on electrical designs.

Location: Montreal, Canada TASK SUMMARY: Architecture Concept & Requirements • Gather functional, performance, environmental and security requirements from mission  stakeholders & CONOPs. • Map requirements to payload equipment performance with I/F with on-board processor • Coordinate with cybersecurity team for payload‑specific assessments • Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Payload Architecture & Design • Implement the high‑level digital payload architecture (optical ISLs, Phased array antennas, Feeder links & front‑end), master reference oscillator & clock synchronizations. • Produce Interface Control Documents (ICDs) with other subsystems and ground segment. • Implement high‑speed data‑bus I/F (SpaceWire, SpaceFibre, Ethernet, CAN). Simulation & Analysis • Perform performance simulations (Gain, Spurious, Linearity, SNR, dynamic range, spectral efficiency, G/T, EIRP…etc.) and Monte‑Carlo analyses for tolerance budgeting. • Define and maintain Payload DC power budget with traffic & utilization models • Perform FMECA, Fault tree and FDIR, reliability modeling and availability to meet mission objectives Hardware & Firmware • Provide system‑level specifications to hardware designers, review schematics, layouts, thermal interfaces, and mechanical constraints. • Support SW development for MODCODs and on‑board processing pipelines; ensure BIST, timing, latency and deterministic behavior. Cross‑Functional Coordination, Stakeholder & Program Interaction • Communicate technical status, risk assessments and trade‑study results to senior management and/or customers or partners. • Support payload design authority in System design reviews, Power/Structure/Thermal interfaces and Mission Operations assessments. • Liaise with Electrical, Power, Structures, Thermal, Software, Ground‑Segment and  Mission‑Operations teams to resolve integration issues early. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Develop Payload Verification Master Plan covering unit‑test, subsystem‑test, payload‑level test, environmental and electromagnetic compatibility (EMC) test campaigns. • Lead test‑automation framework set‑up, test‑case definition, results analysis and test‑report certification. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns. • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to our client's knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Ensure all artefacts, analysis, software, deliverables and documentation are version controlled in PLM environment. • Lead and Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation. On Orbit & Operations Support • Provide technical support to Mission Operations for routine payload health monitoring, contingency handling and performance trending. • Lead root‑cause investigations for on‑orbit anomalies; update design baselines and lessons‑learned. • Analyze on‑orbit telemetry, update filter parameters, and generate performance reports. • Support SOOH development and associated operator training. Required Qualifications: • B.Sc. in Electrical Engineering, Aerospace or Physics with 8 + years of digital regenerative payload system design experience on LEO/MEO missions. • Comprehensive knowledge of digital communications, SDR, DSP, DVB RCS/SX protocols,  Modulation schemes, Class of Service, Networking, MPLS, 2G, 5G NTN. • Strong technical-writing ability (requirements, ICDs, test procedures, risk reports) and presentation skills; comfortable interfacing with customers, suppliers and senior leadership. • Strong understanding of aerospace system engineering fundamentals. • Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. • Experience with Confluence and JIRA. • Demonstrated capability to efficiently work with little supervision. • Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. • Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Montreal, Canada Tasks summary: Architecture Concept & Requirements • Establish functional, performance, environmental and security requirements with mission stakeholders & CONOPs. • Translate requirements into clear payload performance parameters and maintain bidirectional traceability throughout the project lifecycle. • Establish with cybersecurity team payload‑specific requirements & embed resilience and security by design. Payload Architecture Definition • Define the overall digital regenerative payload architecture (optical/RF ISLs, antenna arrays, digitizers/ onboard processing, Feeder links, master reference oscillator & clock synchronizations). • Define Interface Control Documents (ICDs) with spacecraft bus, ground segment and payload specific subsystems. • Define high‑speed data‑bus I/F (Serdes, SpaceWire, SpaceFibre, Ethernet, CAN, fiber). Trade‑Study & Technology Road‑Mapping • Lead trade‑offs for technologies, ASIC/FPGAs/SoCs, high‑speed data‑bus, and on‑board processing algorithms, PVT. • Identify emerging technologies and incorporate them into our client’s long‑term roadmap. System Modeling & Performance Simulation • Build end‑to‑end models of the signal chain (optical/RF, analog/digital) using MATLAB/Simulink, SystemView or Python‑based toolkits. • Run Monte‑Carlo and tolerance analyses to verify gain, SNR, dynamic range, spectral efficiency, G/T, EIRP and other key metrics. • Optimize payload design and performance with operation with traffic models/CONOPs. Simulation & Analysis • Oversee performance simulations & analysis (Gain, Spurious, Linearity, SNR, dynamic range, spectral efficiency, pointing, G/T, EIRP…etc.) and tolerance budgeting. • Optimize Payload DC power budget with traffic & utilization models. Hardware & Firmware • Own system‑level specifications to hardware designers, review schematics, layouts, thermal & mechanical interfaces. • Oversee MODCODs selection and on‑board processing pipelines; define BIST, timing, latency and deterministic behavior. Cross‑Functional Coordination, Stakeholder & Program Interaction • Communicate technical status, risk assessments and trade‑study results to senior management and/or customers or partners. • Act as the primary technical liaison with Electrical, Power, Structures, Thermal, Software, Ground Segment and Mission Operations teams to resolve integration issues early. • Support payload design authority in System design reviews and Mission Operations hand‑over. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Author Payload Verification Master Plan covering unit‑test, subsystem‑test, payload‑level test, environmental and electromagnetic compatibility (EMC) test campaigns. • Define test‑automation framework set‑up, test‑case definition, results analysis and test‑report certification. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns. • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to our client’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Ensure all artefacts, analysis, software, deliverables and documentation are version controlled  in PLM environment. • Chair design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation. On Orbit & Operations Support • Technical support to Mission Operations for routine payload health monitoring, contingency handling and performance trending. • Lead root‑cause investigations for on‑orbit anomalies; update design baselines and lessons‑learned. • Analyze on‑orbit telemetry, update filter parameters, and generate performance reports. • Define SOOH and associated operator training. Required Qualifications: • B.Sc. in Electrical Engineering, Aerospace or Physics (M.Sc. preferred) with 12 + years of digital regenerative payload system design experience on LEO/MEO missions. • Comprehensive knowledge of digital regenerative communications, SDR, DSP, DVB RCS/SX protocols, Modulation schemes, Class of Service, Networking, MPLS, 2G, 5G, NTN. • Strong technical writing ability (requirements, ICDs, test procedures, risk reports) and presentation skills; comfortable interfacing with customers, suppliers and senior leadership. • Strong understanding of aerospace system engineering fundamentals. • Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. • Experience with Confluence and JIRA. • Demonstrated capability to efficiently work with little supervision. • Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. • Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Warsaw Workplace: Hybrid ROLE HIGHLIGHTS: Senior Optomechanical Engineer - Location: Warsaw, Poland - Department: Engineering / Optical Systems - Reports to: Mechanical Engineering Team Lead - Employment type: Permanent - Workplace model: Hybrid - Employment is subject to applicable security screening (incl. SUPO, where required) WHY THIS ROLE MATTERS: As Senior Optomechanical Engineer, you will be the critical link between optical and mechanical engineering, turning advanced optical designs into flight-ready mechanical structures for ICEYE's satellite payloads. Working hands-on across CAD, materials and precision mechanics, you will own the mechanical design of optomechanical assemblies through every stage of the product lifecycle, from concept and prototyping to manufacturing, integration, testing, and qualification for space. You will ensure that performance, precision, and alignment are preserved as an optical design moves from the design file to a finished satellite instrument. WHO WE ARE ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. YOUR DAY-TO-DAY RESPONSIBILITIES   - Own the mechanical side of the optical payload's development, from early concept work through prototyping, and into production, integration, and pre-launch qualification, working hands-on on CAD design, analysis, and optimization throughout. - Sit at the interface between the optical and mechanical domain, reading and interpreting optical designs so that the mechanical structures, mounts, and adjustment mechanisms you build preserve their performance once assembled and tested. - Build and maintain close working relationships with external manufacturers and subcontractors, so that the components and mechanisms they deliver meet the precision, alignment, and quality the design calls for. WHAT WE’RE LOOKING FOR Must haves: - Expert knowledge and hands-on skills of mechanical CAD design, analysis and optimization including all phases of the project from the concept up to material and structural analysis. - Familiarity with the material science and engineering being able to guide material selection and analysis for the space environment (outgassing, thermal cycling, thermoelastic effects). - Embracing the challenge, mindset of owning problems and solving them, capability of taking risks and leaning forward when needed. R&D style of learning by doing and iterating on the parts that require improvement. - Experience in delivering design through suppliers - proven record of working directly together with manufacturers and subcontractors in order to get the design delivered to production, verified and validated. Nice to haves: - Exposure to space optics. - Experience with TVAC and vibration testing, and pre-launch qualification campaigns. - Experience selecting and qualifying optical components together with manufacturers. - Knowledge of metrology and measurement techniques for precisely actuated systems, including optical profiling and CMM methods. APPLICATION PROCESS - Talent Attraction Screening - Hiring Manager Screening - Onsite workshop + Technical discussion - Interview with Leadership WORKING AT ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. HOW WE WORK (OUR VALUES) - Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. BENEFITS Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Dhahran, Saudi Arabia ERAM Talent is seeking an experienced Research & Development (R&D) Engineer – Beverages . The successful candidate will be responsible for developing innovative beverage formulations, improving existing products, conducting pilot trials, and supporting factory-scale production. This role requires strong expertise in beverage formulation, sugar reduction technologies, and functional ingredients. Key Responsibilities Develop and formulate new beverage and liquid products based on market trends and customer requirements. Improve existing beverage formulations to enhance taste, quality, nutritional value, and production efficiency. Lead sugar reduction initiatives using alternative sweeteners while maintaining product taste, texture, and stability. Develop formulations incorporating functional ingredients such as vitamins, minerals, proteins, and fibers. Conduct laboratory trials, bench-top formulations, and pilot-scale testing. Lead factory scale-up activities and support the successful transition from laboratory development to commercial production. Evaluate thermal processing methods, including pasteurization, to ensure product quality and ingredient stability. Select and evaluate raw materials and identify suitable alternatives when required. Provide technical support during new product launches and production trials. Train production teams on processing requirements for new formulations. Troubleshoot manufacturing issues such as sedimentation, phase separation, flavor degradation, and color changes. Work closely with Quality Assurance to ensure compliance with food safety and regulatory standards. Conduct shelf-life studies, stability testing, and maintain complete technical documentation. Requirements Bachelor's degree in Food Technology, Food Science, Chemical Engineering, Biotechnology, or a related discipline. 5+ years of hands-on R&D experience in the Beverage or Liquid Food Manufacturing industry. Proven experience in beverage formulation and product development. Strong knowledge of functional ingredients and their stability in liquid applications. Demonstrated experience in sugar reduction projects and alternative sweeteners. Experience with pilot plant trials and factory-scale production. Sound understanding of pasteurization, beverage processing, and food safety standards. Strong analytical, troubleshooting, and problem-solving skills. Excellent documentation and communication abilities. Preferred Experience Experience in juice, flavored beverages, dairy beverages, functional drinks, or similar liquid food products. Exposure to cost optimization and product reformulation projects. Familiarity with international food safety and quality management systems.

Location: Costa Mesa, United States WHAT YOU’LL DO: Develop and integrate hardware on unmanned air vehicles Own designs from concept generation to real world use Use first principles physics as a basis for every decision Lead design reviews, run analysis, visit vendors, define and execute hardware test plans Build prototypes, analyze failures, and transition successful projects into production Support critical hardware demonstrations with customers as needed Travel to test sites as needed REQUIRED QUALIFICATIONS: 5+ years of mechanical engineering experience Advanced Air Vehicles Programs Experience integrating electrical and mechanical subsystems into advanced air vehicles Experience designing mechanical parts (CAD). Understanding of manufacturing methods (machining, sheet metal, composites, 3D printing, injection molding, composite lamination, etc) High competence with, and fluid use of, engineering first principles BS or higher degree in Mechanical, Aerospace, or Electrical Engineering Eligible to obtain and maintain an active U.S. Secret security clearance PREFERRED QUALIFICATIONS Experience in NX/Teamcenter Experience developing aircraft subsystem layouts, performing architectural trade studies, and evaluating vendor performance data Competency in engineering analysis, including structural, thermal, and electrical

Location: Costa Mesa, United States WHAT YOU WILL DO Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug, and system integration Conduct bring-up and design work on microcontrollers, ensuring seamless integration within the system Troubleshoot issues that span electrical and software boundaries, utilizing both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools} ADDITIONAL LEARNING & DEVELOPMENT OPPORTUNITIES Work in a fast-paced environment supporting new developments, deployments, and customer operated hardware Perform power design, including development and integration of power management systems and components Develop payloads and subsystems (sensors, payload interfaces, power management, and networking) Create system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem Collaborate closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional, mission-critical products Conduct peer-level and cross-discipline design reviews REQUIRED QUALIFICATIONS Bachelor’s Degree in Electrical Engineering or equivalent, with 3+ years of experience designing, testing, and troubleshooting complex system designs Ability to perform power system and electrical loading analysis, simulation, and testing to determine optimal solutions High competence using lab test equipment (benchtop power supplies, electronics loads, oscilloscopes, DMM, logic/spectrum analyzers, etc.) with familiarity of thermal and EMI test chambers and using basic software debugging tools Familiarity with common electrical bus interfaces (CAN, I2C, SPI, Ethernet, RS232/422, RS485, USB) Exceptional organization and communication skills (both written and oral) Eligible to obtain and maintain an active U.S. security clearance Experience with power design and power management systems Hands-on experience with microcontrollers, including bring-up and design work Knowledge of modern analog and digital electronics and electronic circuits Experience designing mixed-signal PCBs with multiple layer counts, layer stackup and impedance matching for power and sensor applications, understanding correct grounding approaches and employing appropriate board protections and filtering Understanding of low voltage and high voltage power electronics and control systems in order to capture system interconnect diagrams and drive cable harnessing designs with proper wire and connector selection PREFERRED QUALIFICATIONS Familiar with high end consumer or military embedded systems design Experience with power systems including batteries and AC power. Develop low-level firmware for bring-up and test Background in defense and missile systems. Comprehensive understanding of the effects of temperature and vibration on electrical designs.