Вакансии

Location: Al Jubail, Saudi Arabia; Dammam, Saudi Arabia The Mechanical Engineer will support Oil & Gas EPC projects with a focus on construction management, ensuring compliance with project specifications, industry standards, and Saudi Aramco requirements. The role supports the Jafurah Project through effective technical coordination and professional representation. Key Responsibilities Provide mechanical engineering support across EPC phases, with emphasis on construction management. Review mechanical drawings, specifications, calculations, and vendor submittals. Support site construction, installation, and commissioning activities. Coordinate with engineering, procurement, QA/QC, and construction teams. Ensure compliance with project quality, schedule, and HSE requirements. Mandatory Requirements Bachelor’s Degree in Mechanical Engineering. Minimum 10 years of Oil & Gas experience as a Mechanical Static Engineer. EPC project experience (Engineering, Procurement, Construction). Strong construction management experience. Fluent in English (written and verbal). Preferred PMP certification. Location: Jafurah

Location: Tabuk, Saudi Arabia; Jeddah, Saudi Arabia; Riyadh, Saudi Arabia; Al Khobar, Saudi Arabia The Electrical Engineer supports the Senior MEP Engineer in managing the maintenance and performance of all medium and low-voltage power distribution systems within the Primary Nursery Facility at NEOM. This includes electrical substations, switchgear, distribution boards, emergency generators, UPS, lighting, and general power infrastructure. The role is responsible for supervising the execution of preventive, reactive and corrective maintenance activities carried out by the service provider, ensuring compliance with safety protocols, technical standards, and contractual KPIs. The Electrical Engineer supports maintenance planning, monitors spare parts consumption, oversees electrical testing and commissioning activities, and ensures system reliability and energy efficiency across the facility. Collaboration with other engineering disciplines, particularly the Low Current and Mechanical teams, is essential to maintaining safe and seamless MEP operations. Support the Senior MEP Engineer in maintaining MV/LV electrical systems, substations, generators, UPS, lighting, and power infrastructure. Monitor preventive, corrective, and reactive maintenance activities in line with approved plans and manufacturer guidelines. Supervise service providers to ensure safe, high-quality work and compliance with electrical safety standards. Assist in developing and improving electrical maintenance programs and schedules. Conduct inspections and audits to ensure system reliability, efficiency, and QA/QC compliance. Assess service provider performance and recommend training or improvements. Monitor spare parts usage and support inventory planning. Assist with asset condition assessments and planning for upgrades or replacements. Support preparation and review of technical documents and maintenance reports. Troubleshoot electrical faults and support root cause analysis. Assist with commissioning, handover, and closeout of electrical installations. Promote electrical safety and participate in HSE audits and corrective actions. Support energy efficiency initiatives and best maintenance practices. Assist in design reviews, decommissioning activities, and coordination with contractors and stakeholders. Requirements Bachelor’s degree in Electrical Engineering or a related discipline (mandatory). 4–6 years of experience in electrical system design, operation, and maintenance, with good knowledge of applicable codes and standards. Strong understanding of MV/LV power distribution systems, substations, generators, UPS, and lighting systems. Experience in preventive and corrective maintenance planning and execution. Familiarity with electrical safety regulations, HSE practices, and QA/QC procedures. Ability to read, interpret, and review electrical drawings, schematics, and technical documents. Experience in supervising contractors or service providers. Basic knowledge of asset management systems and maintenance reporting.

Location: Jeddah, Saudi Arabia; Riyadh, Saudi Arabia; Tabuk, Saudi Arabia; Dubai, United Arab Emirates; Lusail, Qatar; Cairo, Egypt Eram Talent, a leading Talent Acquisition Company, is seeking An experienced Electrical Engineer with a strong background in design reviews, material installation, site supervision, and quality inspections for the electrical components of major building rectification and upgrade programs. This role demands a high level of expertise in the design, execution, testing, and commissioning of complex electrical systems. The ideal candidate will ensure stringent adherence to design criteria, codes, and industry standards at every stage of the project life cycle. Responsibilities: Perform design reviews of design packages, providing constructability insights as needed to the Design & Engineering team or consultants. Review and coordinate shop drawings, and as-built drawings across multiple trades and disciplines. Supervise and inspect electrical work, providing day-to-day monitoring of project progress within the project scope. Perform QA/QC inspections to identify nonconforming work, issuing periodic reports to track quality metrics. Respond to contractor requests for inspections, technical queries, and site clarifications, coordinating with the project management team to issue field directives as necessary. Verify quantities and work progress to ensure accuracy in completed work calculations. Coordinate and resolve electrical design issues that, arise during construction, working closely with all stakeholders, including contractors, to ensure alignment within the project scope. Support technical decision-making on electrical systems, providing expertise to address design or installation challenges. Assist in the installation, troubleshooting, and repair of electrical systems as needed. Offer technical knowledge and guidance on the operation of electrical distribution systems. Lead commissioning, startup, and adjustments of electrical systems and components, ensuring proper function. Investigate and resolve complaints related to code violations, addressing issues promptly. Monitor project progression via an approved schedule to ensure adherence to timelines and milestones. Document deficiencies and corrective actions by photographing conditions before and after rectification. Maintain comprehensive records and daily updates to the project track sheet. Develop Project Charters outlining project scope, budget, and schedule to guide project planning and execution. Work in partnership with other FM teams, IT, HSE, and stakeholders as needed, with transparency. Be user-centric, building trust and strong relationships with customers, providing options, solutions and choices to meet their needs. Requirements Bachelor's degree in Electrical Engineering or a related discipline A minimum of 5 years of experience in electrical design engineering Minimum of 5 years of experience in verifying design against construction, QA/QC, material specification, Electrical Systems commissioning Perform design reviews of design packages, providing constructability insights as needed to the Design & Engineering team or consultants. Proficient in electrical design software and tools (e.g., AutoCAD, EPLAN, ETAP) Strong understanding of electrical codes, standards, and regulations Experience designing electrical systems for industrial or commercial applications Exceptional problem-solving and analytical capabilities Excellent communication and interpersonal skills Ability to thrive in a fast-paced and collaborative work environment Benefits Salary is not a constraint ,company is looking for right candidate .

Location: Hong Kong Nex is on a mission to help families rediscover the joy of movement. Created by parents for parents, Nex combines technology and play to deliver fun, social, and interactive experiences powered by natural body motion, encouraging kids and adults to move more, play more, and have fun together. Nex Playground, the company’s award-winning active play system, is purpose-built to get families moving year-round, with safety and privacy as core considerations in its intentional design. It is certified kidSAFE+ COPPA compliant and built to support healthy, active play for all ages and abilities. Nex Playground features a growing library of 50+ experiences, including motion and dance games, fitness and educational experiences, and Nex Originals. Content includes collaborations with partners like Hasbro, Sesame Workshop, and NBCUniversal. Nex has been recognized by Fast Company’s Most Innovative Companies, TIME’s Best Inventions, and Parents’ Best Entertainment System for Families, and has earned Red Dot, IDEA, and Core77 international design awards. We encourage you to explore Have Fun and Is Motion Gaming Back? , as they offer a deeper look into our culture, values, and explain how our approach to motion gaming differs from previous generations. Nex employees may be expected to collaborate with colleagues across different time zones. Depending on the role and location, occasional travel may also be required for company events, external meetings, and other business-related activities. Important Notice: ⚠️ To protect yourself from recruitment scams, please note that Nex communicates through official company emails ending in @nex.inc . If you receive a suspicious email or message, please do not respond and report it immediately to us. Location: Hong Kong Type: Full Time Reports to: Head of Product Management, New Products The Role As the Senior Product Development Manager for New Products, you will lead end‑to‑end development of soft and hard goods from concept through mass production and post‑launch refinement. You will translate business objectives and customer insights into clear requirements, align teams on scope, schedule, quality, and cost, and drive execution across industrial design, materials, packaging, testing, compliance, and supply chain. You will be the primary interface to external partners and factories, protecting design intent and manufacturability, ensuring regulatory readiness, and proactively managing risks, budgets, and change control. Success is measured by on‑time delivery to quality and cost targets, smooth scale‑up, and crisp communication of status, trade‑offs, and decisions. What You'll Do Own multiple soft and hard goods programs end‑to‑end, delivering to scope, schedule, quality, and cost. Translate product requirements into clear specs with design and engineering; protect design intent while ensuring manufacturability. Drive with cross functional team for DFx across plastics, textiles, and mixed‑material assemblies, including part design, tolerances, surface finishes, seams, trims, and assembly. Lead prototyping through production readiness: lab dips/strike‑offs, T0/T1, golden samples, tooling, sampling, and approvals. Source, evaluate, and onboard vendors and manufacturing partners; manage performance on cosmetic quality, yield, throughput, and cost. Work with packaging team to coordinate packaging from dielines and artwork to structural validation, transit tests, and retail compliance. Plan and execute validation and reliability: fit/function, abuse and sharp‑edge, seam and pull tests, colorfastness, and process capability. Work with compliance team to manage safety and regulatory approvals for toys and consumer goods and define pre‑compliance strategies. Establish QA/QC with AQL sampling, in‑process controls, and final inspections; drive CAPA with vendors. Maintain program dashboards and cadences with clear updates, dependencies, risks, and trade‑offs for stakeholders. Must Have 10+ years in program or product development delivering soft and hard goods at scale. Strong grasp of ME, CMF, and DFx with manufacturing processes such as injection/blow molding, extrusion, die‑cutting, sewing, heat sealing, printing, and assembly. Background spanning textiles and plastics, color management, printing methods, packaging materials, and surface treatments. Demonstrated experience with packaging engineering and transit testing, and with QA/QC in factory environments. Fluency with project tools and artifacts, including schedules, timeline views, risk registers, dashboards, BOMs, and change orders. Excellent communication and stakeholder management; able to drive alignment across design, operations, sourcing, and vendors. Fluency in English and Mandarin. Nice to Have PMP or comparable program management certification. Hands‑on experience with toy and consumer‑goods safety and regulatory labs. Rapid prototyping fluency across soft and hard goods, with tight iteration cycles. Strong supplier development chops: vendor scorecards, QBRs, corrective action leadership, and dual‑sourcing strategy Contract and commercial negotiation experience with suppliers on cost, MOQs, tooling amortization, and SLAs Experience with sustainability initiatives such as recycled content, packaging minimization, and eco‑labeling claims. Travel, and Time zones Travel: International travel to factories and labs as needed Timezone: Will collaborate across timezones with our global teams We Offer Competitive compensation package. Flexible working hours and vacation policy. Product-driven culture that treasures talents and individual growth. Front-row seat and hands-on experience with cutting edge technologies in the evolving gaming field Nex is located in San Jose, California, USA and Hong Kong . Learn more about us at https://www.nexplayground.com/about . We encourage applications even if you don’t meet more than 50% of the requirements — we believe that experience comes in many forms! Nex is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, childbirth, gender identity, and sexual orientation), national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital status, military or veteran status, or any other characteristic protected by applicable law. This policy applies to all individuals at every stage of the employment relationship, including all current and prospective employees, and covers all employment decisions including recruitment, hiring, job assignment, promotion, compensation, benefits, training, discipline and termination. We are committed to providing a workplace free from discrimination and harassment and to fostering an inclusive environment for all employees.

Location: Dhahran, Saudi Arabia; Al Jubail, Saudi Arabia Eram Talent is looking for a highly skilled Welding QC Engineer with Hot Tap experience to join our team for a prestigious project with Aramco. As a leading Talent Acquisition Consultancy in the Oil & Energy sector, we are dedicated to connecting top-tier professionals with exciting opportunities in industries such as Oil & Gas, Infrastructure, and Energy. In this role, you will be responsible for ensuring the quality and integrity of welding operations, particularly in hot tapping processes. Your expertise will be crucial in maintaining compliance with industry standards and ensuring the safety and reliability of the projects we support. If you have a passion for quality control in welding and a proven track record in the Oil & Gas industry, we encourage you to apply! Responsibilities Perform quality control inspections of welding activities related to hot tap operations in accordance with project specifications and standards. Review and understand project documents, including welding procedures, inspection plans, and quality plans. Compile and maintain records of inspections, tests, and results, ensuring compliance with Aramco's quality assurance requirements. Work closely with project engineering and construction teams to identify potential quality issues and provide solutions. Participate in pre-welding briefings and communicate the importance of quality expectations to all personnel involved in the welding process. Monitor and ensure compliance with safety standards during all welding activities. Conduct regular audits of welding processes and report findings to the QA/QC Manager. Assist in the development and improvement of welding procedures and quality control protocols. Prepare detailed inspection reports and documentation for approval and maintain clear communication with clients and stakeholders. Requirements Bachelor's degree in Welding Engineering, Mechanical Engineering, or related field. Minimum 8 years of experience as a Welding QC Engineer, specifically with hot tap operations. Valid Aramco approval or certification as a Welding QC Engineer is required. Thorough understanding of welding codes and standards (ASME, API, etc.) and experience in the Oil & Gas industry. Familiarity with Aramco's quality assurance and quality control standards. Experience with Non-Destructive Testing (NDT) methods and certifications is a plus. Strong communication and interpersonal skills to effectively collaborate with teams. Ability to work under pressure and manage multiple priorities in a fast-paced environment.

Location: Dammam, Saudi Arabia; Al Jubail, Saudi Arabia; Jeddah, Saudi Arabia; Riyadh, Saudi Arabia Serves as the technical authority for all piping design activities in EPC projects, accountable for technical decisions, quality, schedule, and cost control. Acts as the primary interface with project management and other engineering disciplines to ensure full compliance with SAES, SAMSS, and applicable regulations. Key Responsibilities 1. Technical Leadership Lead and oversee all piping design activities (layout, materials, stress, supports). Review and approve key deliverables: P&IDs, Piping Class Sheets, GADs, Isometrics, Stress Reports. Resolve complex technical and coordination issues across disciplines. Ensure design quality, constructability, and cost optimization. 2. Standards & Compliance Ensure full adherence to (SAES, SAMSS) and international codes (ASME B31.3, API, ASTM). Integrate company procedures with client requirements. 3. Discipline Coordination Interface with Process, Equipment, Structural, Instrumentation, Electrical, and Civil teams. Provide piping loads, review nozzle orientations, and support 3D model reviews (30%, 60%, 90%). 4. Client & Vendor Management Lead technical meetings with clients and secure design approvals. Review and approve vendor documents for critical piping items (valves, fittings, supports). 5. Team & Quality Management Manage and mentor piping designers and stress engineers. Implement QA/QC procedures and mitigate technical risks. Qualifications Education: Bachelor’s degree or higher in Mechanical, Chemical, or Petrochemical Engineering. Certification: P.E. or CEng (or equivalent qualification) preferred. Experience: 15+ years in piping design for oil & gas/petrochemical EPC; minimum 2 full-cycle projects as Lead. Software: Proficient in CAESAR II, SP3D/AVEVA E3D. Knowledge: Expert in SAES, SAMSS, ASME B31.3, API, ASTM standards. Skills: Strong leadership, communication, and decision-making in multicultural environments. Language: Fluent English (spoken & written). Other: Fit for long-term overseas assignments; high integrity and professionalism.

Location: Chile; Ecuador; Peru; Uruguay; Costa Rica Engineering Project Management Coordinator Location: Remote Type: Full‑time (40 hrs/week) Time Zone: EST (New York) About Our Client This is a forward‑thinking engineering firm specializing in infrastructure, structural and civil projects. They blend technical excellence with streamlined operations to deliver on‑time, on‑budget solutions for their clients. The Role As our Engineering Project Management Coordinator , you’ll ensure that project schedules, resources, costs and deliverables stay on track. You’ll be the linchpin between engineering teams, clients and business operations—owning day‑to‑day PMO tasks so our engineers can focus on design. Key Responsibilities Project Scheduling & Resource Allocation Build, maintain and update project schedules in Project Insight Monitor team workloads, reassign tasks to balance capacity Cost Monitoring & Invoicing Track project budgets and actuals, flag variances Prepare and issue client invoices; support estimate development Project Insight Administration Configure new projects, dashboards and custom fields Train team members on basic usage and best practices QA/QC Support Coordinate task‑level quality checks and documentation Business‑Ops & Collaboration Tools Manage SharePoint sites and Lists for document control Make light updates to WordPress posts (e.g., news, team pages) Ad Hoc & Continuous Improvement Assist with cloud‑migration initiatives (SharePoint ➔ Autodesk Construction Cloud) Suggest process enhancements to boost efficiency and transparency Requirements Must‑Have Qualifications Project Management Experience (2–5 years), preferably in AEC or engineering support Hands‑on with Project Insight , or rapid ability to learn it Strong MS 365 Proficiency (SharePoint, Lists, Teams) Fluent English (written and verbal) Proven ability to coordinate multiple projects and stakeholders Nice‑to‑Have Familiarity with Autodesk Construction Cloud workflows Basic WordPress administration (editing posts, media uploads) Experience with simple database or list management Benefits Why You’ll Love It Here Work remotely with a talented, close‑knit engineering operations team Opportunity to shape and optimize our PM processes Career growth; transition into a PMO Lead or Operations Manager role Flexible hours and a supportive culture

Location: El Salvador Engineering Project Management Coordinator Location: Remote Type: Full‑time (40 hrs/week) Time Zone: EST (New York) About Our Client This is a forward‑thinking engineering firm specializing in infrastructure, structural and civil projects. They blend technical excellence with streamlined operations to deliver on‑time, on‑budget solutions for their clients. The Role As our Engineering Project Management Coordinator , you’ll ensure that project schedules, resources, costs and deliverables stay on track. You’ll be the linchpin between engineering teams, clients and business operations—owning day‑to‑day PMO tasks so our engineers can focus on design. Key Responsibilities Project Scheduling & Resource Allocation Build, maintain and update project schedules in Project Insight Monitor team workloads, reassign tasks to balance capacity Cost Monitoring & Invoicing Track project budgets and actuals, flag variances Prepare and issue client invoices; support estimate development Project Insight Administration Configure new projects, dashboards and custom fields Train team members on basic usage and best practices QA/QC Support Coordinate task‑level quality checks and documentation Business‑Ops & Collaboration Tools Manage SharePoint sites and Lists for document control Make light updates to WordPress posts (e.g., news, team pages) Ad Hoc & Continuous Improvement Assist with cloud‑migration initiatives (SharePoint ➔ Autodesk Construction Cloud) Suggest process enhancements to boost efficiency and transparency Requirements Must‑Have Qualifications Project Management Experience (2–5 years), preferably in AEC or engineering support Hands‑on with Project Insight , or rapid ability to learn it Strong MS 365 Proficiency (SharePoint, Lists, Teams) Fluent English (written and verbal) Proven ability to coordinate multiple projects and stakeholders Nice‑to‑Have Familiarity with Autodesk Construction Cloud workflows Basic WordPress administration (editing posts, media uploads) Experience with simple database or list management Benefits Why You’ll Love It Here Work remotely with a talented, close‑knit engineering operations team Opportunity to shape and optimize our PM processes Career growth; transition into a PMO Lead or Operations Manager role Flexible hours and a supportive culture

Location: Brazil Engineering Project Management Coordinator Location: Remote Type: Full‑time (40 hrs/week) Time Zone: EST (New York) About Our Client This is a forward‑thinking engineering firm specializing in infrastructure, structural and civil projects. They blend technical excellence with streamlined operations to deliver on‑time, on‑budget solutions for their clients. The Role As our Engineering Project Management Coordinator , you’ll ensure that project schedules, resources, costs and deliverables stay on track. You’ll be the linchpin between engineering teams, clients and business operations—owning day‑to‑day PMO tasks so our engineers can focus on design. Key Responsibilities Project Scheduling & Resource Allocation Build, maintain and update project schedules in Project Insight Monitor team workloads, reassign tasks to balance capacity Cost Monitoring & Invoicing Track project budgets and actuals, flag variances Prepare and issue client invoices; support estimate development Project Insight Administration Configure new projects, dashboards and custom fields Train team members on basic usage and best practices QA/QC Support Coordinate task‑level quality checks and documentation Business‑Ops & Collaboration Tools Manage SharePoint sites and Lists for document control Make light updates to WordPress posts (e.g., news, team pages) Ad Hoc & Continuous Improvement Assist with cloud‑migration initiatives (SharePoint ➔ Autodesk Construction Cloud) Suggest process enhancements to boost efficiency and transparency Requirements Must‑Have Qualifications Project Management Experience (2–5 years), preferably in AEC or engineering support Hands‑on with Project Insight , or rapid ability to learn it Strong MS 365 Proficiency (SharePoint, Lists, Teams) Fluent English (written and verbal) Proven ability to coordinate multiple projects and stakeholders Nice‑to‑Have Familiarity with Autodesk Construction Cloud workflows Basic WordPress administration (editing posts, media uploads) Experience with simple database or list management Benefits Why You’ll Love It Here Work remotely with a talented, close‑knit engineering operations team Opportunity to shape and optimize our PM processes Career growth; transition into a PMO Lead or Operations Manager role Flexible hours and a supportive culture

Location: Mexico Engineering Project Management Coordinator Location: Remote Type: Full‑time (40 hrs/week) Time Zone: EST (New York) About Our Client This is a forward‑thinking engineering firm specializing in infrastructure, structural and civil projects. They blend technical excellence with streamlined operations to deliver on‑time, on‑budget solutions for their clients. The Role As our Engineering Project Management Coordinator , you’ll ensure that project schedules, resources, costs and deliverables stay on track. You’ll be the linchpin between engineering teams, clients and business operations—owning day‑to‑day PMO tasks so our engineers can focus on design. Key Responsibilities Project Scheduling & Resource Allocation Build, maintain and update project schedules in Project Insight Monitor team workloads, reassign tasks to balance capacity Cost Monitoring & Invoicing Track project budgets and actuals, flag variances Prepare and issue client invoices; support estimate development Project Insight Administration Configure new projects, dashboards and custom fields Train team members on basic usage and best practices QA/QC Support Coordinate task‑level quality checks and documentation Business‑Ops & Collaboration Tools Manage SharePoint sites and Lists for document control Make light updates to WordPress posts (e.g., news, team pages) Ad Hoc & Continuous Improvement Assist with cloud‑migration initiatives (SharePoint ➔ Autodesk Construction Cloud) Suggest process enhancements to boost efficiency and transparency Requirements Must‑Have Qualifications Project Management Experience (2–5 years), preferably in AEC or engineering support Hands‑on with Project Insight , or rapid ability to learn it Strong MS 365 Proficiency (SharePoint, Lists, Teams) Fluent English (written and verbal) Proven ability to coordinate multiple projects and stakeholders Nice‑to‑Have Familiarity with Autodesk Construction Cloud workflows Basic WordPress administration (editing posts, media uploads) Experience with simple database or list management Benefits Why You’ll Love It Here Work remotely with a talented, close‑knit engineering operations team Opportunity to shape and optimize our PM processes Career growth; transition into a PMO Lead or Operations Manager role Flexible hours and a supportive culture

Location: Colombia Engineering Project Management Coordinator Location: Remote Type: Full‑time (40 hrs/week) Time Zone: EST (New York) About Our Client This is a forward‑thinking engineering firm specializing in infrastructure, structural and civil projects. They blend technical excellence with streamlined operations to deliver on‑time, on‑budget solutions for their clients. The Role As our Engineering Project Management Coordinator , you’ll ensure that project schedules, resources, costs and deliverables stay on track. You’ll be the linchpin between engineering teams, clients and business operations—owning day‑to‑day PMO tasks so our engineers can focus on design. Key Responsibilities Project Scheduling & Resource Allocation Build, maintain and update project schedules in Project Insight Monitor team workloads, reassign tasks to balance capacity Cost Monitoring & Invoicing Track project budgets and actuals, flag variances Prepare and issue client invoices; support estimate development Project Insight Administration Configure new projects, dashboards and custom fields Train team members on basic usage and best practices QA/QC Support Coordinate task‑level quality checks and documentation Business‑Ops & Collaboration Tools Manage SharePoint sites and Lists for document control Make light updates to WordPress posts (e.g., news, team pages) Ad Hoc & Continuous Improvement Assist with cloud‑migration initiatives (SharePoint ➔ Autodesk Construction Cloud) Suggest process enhancements to boost efficiency and transparency Requirements Must‑Have Qualifications Project Management Experience (2–5 years), preferably in AEC or engineering support Hands‑on with Project Insight , or rapid ability to learn it Strong MS 365 Proficiency (SharePoint, Lists, Teams) Fluent English (written and verbal) Proven ability to coordinate multiple projects and stakeholders Nice‑to‑Have Familiarity with Autodesk Construction Cloud workflows Basic WordPress administration (editing posts, media uploads) Experience with simple database or list management Benefits Why You’ll Love It Here Work remotely with a talented, close‑knit engineering operations team Opportunity to shape and optimize our PM processes Career growth; transition into a PMO Lead or Operations Manager role Flexible hours and a supportive culture

Location: Argentina Engineering Project Management Coordinator Location: Remote Type: Full‑time (40 hrs/week) Time Zone: EST (New York) About Our Client This is a forward‑thinking engineering firm specializing in infrastructure, structural and civil projects. They blend technical excellence with streamlined operations to deliver on‑time, on‑budget solutions for their clients. The Role As our Engineering Project Management Coordinator , you’ll ensure that project schedules, resources, costs and deliverables stay on track. You’ll be the linchpin between engineering teams, clients and business operations—owning day‑to‑day PMO tasks so our engineers can focus on design. Key Responsibilities Project Scheduling & Resource Allocation Build, maintain and update project schedules in Project Insight Monitor team workloads, reassign tasks to balance capacity Cost Monitoring & Invoicing Track project budgets and actuals, flag variances Prepare and issue client invoices; support estimate development Project Insight Administration Configure new projects, dashboards and custom fields Train team members on basic usage and best practices QA/QC Support Coordinate task‑level quality checks and documentation Business‑Ops & Collaboration Tools Manage SharePoint sites and Lists for document control Make light updates to WordPress posts (e.g., news, team pages) Ad Hoc & Continuous Improvement Assist with cloud‑migration initiatives (SharePoint ➔ Autodesk Construction Cloud) Suggest process enhancements to boost efficiency and transparency Requirements Must‑Have Qualifications Project Management Experience (2–5 years), preferably in AEC or engineering support Hands‑on with Project Insight , or rapid ability to learn it Strong MS 365 Proficiency (SharePoint, Lists, Teams) Fluent English (written and verbal) Proven ability to coordinate multiple projects and stakeholders Nice‑to‑Have Familiarity with Autodesk Construction Cloud workflows Basic WordPress administration (editing posts, media uploads) Experience with simple database or list management Benefits Why You’ll Love It Here Work remotely with a talented, close‑knit engineering operations team Opportunity to shape and optimize our PM processes Career growth; transition into a PMO Lead or Operations Manager role Flexible hours and a supportive culture