Вакансии

Location: Montreal, Canada 📍 Location: Montreal, Quebec, Canada 📄 Employment Type: Contract-to-Permanent (Preferred) / Contract 🏢 Work Arrangement: Remote Opportunity for US and Canadian citizens. Relocation allowance + bonus for European and UK Candidates. 🚀 Start Date: Immediate 💰 Compensation: TBD -- based on skills and experience Important Screening Requirements Must be legally eligible to work in Canada . Must be capable of obtaining the required security clearance . English proficiency is required. French is considered an asset. Strong hands-on experience with spacecraft Command & Data Handling (C&DH) systems is required. About the Role We are seeking an experienced Satellite Command & Data-Handling (C&DH) System Engineer to support the design, integration, verification, and operation of onboard command, control, and data-management functions for current and next-generation remote sensing and communications satellite programs. In this role, you will contribute to the C&DH functional architecture , drive technical trade studies, support system integration and verification, and provide technical leadership throughout the spacecraft lifecycle. Key Responsibilities Translate mission-level requirements into C&DH functional and non-functional requirements. Develop and maintain system requirements, Interface Control Documents (ICDs), and system descriptions. Maintain bidirectional requirements traceability throughout the project lifecycle. Support cybersecurity and resilience considerations within C&DH system design. Lead detailed design activities involving: Onboard processors Spacecraft data buses Memory subsystems I/O interfaces Support software architecture activities, including command sequencing, telemetry packetization, health monitoring, and FDIR. Support Satellite Reference Database development and validation. Define uplink command formats, downlink telemetry structures, and ground-segment data-handling interfaces. Collaborate with Flight Software (FSW), TT&C/PDT, and Ground Segment teams to ensure end-to-end data integrity. Develop verification plans, test matrices, and validation procedures for unit, subsystem, and spacecraft-level C&DH testing. Execute functional testing, bus-protocol compliance testing, and SIL/HIL campaigns. Lead anomaly investigations, root-cause analysis, and corrective-action activities. Support spacecraft launch preparation, early-orbit checkout, and on-orbit operations. Analyze on-orbit telemetry and support updates to operational parameters as required. Support SOOH development and operator training. Contribute to technical standards, process improvements, technology roadmaps, and engineering knowledge bases. Support major design reviews, including SRR, PDR, CDR, MRR, and TRR . Mentor junior engineers and serve as a technical liaison with customers, partners, and vendors. Required Qualifications Bachelor's degree in Electrical Engineering, Aerospace Engineering , or a related field. 8+ years of C&DH engineering experience on LEO, MEO, and/or GEO satellite platforms . Deep knowledge of spacecraft data-bus and communication standards, including: SpaceWire MIL-STD-1553 CAN Ethernet CCSDS packet telemetry and command PUS services Knowledge of processors, FPGA, firmware, and embedded systems . Strong understanding of aerospace systems engineering fundamentals, space environment, and orbit mechanics. Hands-on experience supporting systems integration, testing, troubleshooting, and problem resolution . Experience with Confluence and JIRA . Ability to work independently with minimal supervision. Strong analytical and problem-solving skills, with the ability to break down complex technical problems into fundamental components. Excellent written and verbal communication skills in English . Preferred Qualifications Experience supporting end-to-end spacecraft C&DH development and integration. Experience with spacecraft commissioning, early-orbit operations, and on-orbit telemetry analysis. Experience with FDIR , command sequencing, telemetry processing, and spacecraft health monitoring. Experience with SIL/HIL testing and spacecraft bus-protocol compliance verification. French language proficiency. Experience supporting satellite programs through the full lifecycle, from early concept and design through launch and on-orbit operations.

Location: Montreal, Canada 📍 Location: Montreal, Quebec, Canada 📄 Employment Type: Contract-to-Permanent (Preferred) / Contract 🏢 Work Arrangement: Remote Opportunity for US and Canadian citizens. Relocation assistance + bonus for European and UK candidates. 🚀 Start Date: Immediate 💰 Compensation: TBD -- based on skills and experience Important Screening Requirements Must be legally eligible to work in Canada . Must be capable of obtaining the required security clearance . English proficiency is required. French is considered an asset. Candidates must have strong experience with fault-tolerant embedded systems supporting LEO, MEO, and/or GEO spacecraft missions. About the Role We are seeking an experienced Satellite Bus Flight Software Systems Engineer to lead and support the system-level definition, architecture, integration, verification, and operational readiness of flight software for current and next-generation spacecraft platforms. This is a systems engineering and technical leadership role at the intersection of spacecraft architecture, platform subsystems, embedded flight software, avionics, mission operations, and verification. You will ensure that spacecraft bus flight software meets platform and payload functional, performance, autonomy, safety, reliability, and operational requirements throughout the full spacecraft lifecycle—from early architecture and detailed design through integration, launch preparation, commissioning, and on-orbit operations. Key Responsibilities Translate functional, performance, safety, and security requirements into flight software requirements and architecture. Allocate requirements to software modules and execution threads while maintaining bidirectional requirements traceability. Define Flight Software (FSW) architecture, including: RTOS Initialization PUS services Autonomy Health monitoring Fault management Payload interfaces Define FDIR algorithms , isolation logic, recovery actions, safe-mode sequencing, and redundancy management. Guide the integration of FDIR logic into flight software. Develop and maintain Interface Control Documents (ICDs) for payload, platform, and ground-segment interfaces. Support Satellite Reference Database development and validation. Collaborate with payload, platform, ground-segment, and mission-operations teams to identify and resolve integration issues. Develop and support Flight Software Verification Plans and integration testing. Support SIL, HIL, fault-injection, performance, and security testing . Support verification and test automation frameworks, test case development, results analysis, and test-report certification. Support spacecraft mode and operational procedure development. Analyze on-orbit telemetry and support software updates and operational improvements. Support SOOH development and operator training. Participate in major design reviews, including SRR, PDR, CDR, MRR/TRR . Mentor junior engineers and serve as a technical liaison with customers, partners, and vendors. Contribute to engineering standards, process improvements, technology roadmaps, and lessons learned. Required Qualifications Bachelor's degree in Electrical Engineering, Aerospace Engineering, Computer Science, Embedded Systems , or a related field. 10+ years of experience working with fault-tolerant embedded systems on LEO, MEO, and/or GEO satellite missions . Experience with: CCSDS ECSS PUS services MIL-STD-1553 SpaceWire RS-422/485 CAN Ethernet Experience with real-time computing cores and/or embedded Linux . Experience with auto-coding or automated code-generation workflows. Strong understanding of aerospace systems engineering fundamentals. Hands-on experience supporting systems integration, testing, troubleshooting, and problem resolution . Experience with Confluence and JIRA . Ability to work independently with minimal supervision. Strong analytical and problem-solving skills, with the ability to break down complex technical challenges into fundamental components. Excellent written and verbal communication skills in English . Preferred Qualifications Experience with end-to-end spacecraft flight software development and integration. Experience with FDIR, spacecraft autonomy, safe-mode management, and redundancy management . Experience supporting spacecraft commissioning and on-orbit operations . Experience with SIL/HIL , fault injection, and automated verification frameworks. Experience integrating flight software with spacecraft payloads, avionics, and ground systems. French language proficiency. Experience supporting satellite programs from early concept and architecture through launch and on-orbit operations.

Location: Montreal, Canada 📍 Location: Montreal, Quebec, Canada (On-site preferred; exceptional remote candidates will be considered) 📄 Employment Type: Contract-to-Permanent (Preferred) / Contract 🏢 Work Arrangement: Remote Opportunity 🚀 Start Date: Immediate 💰 Compensation: TBD -- based on skills and experience Important Screening Requirements Candidates must possess both of the following non-negotiable qualifications: Model-Based Systems Engineering (MBSE) experience, including SysML , Cameo Systems Modeler , functional decomposition, and requirements traceability. Launch and Early Orbit Phase (LEOP) operations experience, including spacecraft commissioning and/or routine satellite operations. Please note: Candidates who do not have both MBSE and LEOP experience will not be considered. Exceptional candidates may be considered for a fully remote arrangement. Remote candidates must demonstrate significantly stronger MBSE expertise and satellite operations experience than on-site candidates. About the Role We are seeking an experienced Model-Based Systems Engineer (MBSE) to support the development of advanced satellite systems through modern digital engineering practices. In this role, you will develop and maintain system architectures, create model-based engineering artifacts, and ensure end-to-end requirements traceability while supporting spacecraft commissioning and operations during the Launch and Early Orbit Phase (LEOP) . The ideal candidate has a strong background in satellite systems engineering, MBSE methodologies, and mission operations, with the ability to collaborate across multidisciplinary engineering teams. Key Responsibilities Develop and maintain system architectures using Model-Based Systems Engineering (MBSE) methodologies. Create and manage SysML models using Cameo Systems Modeler . Perform functional decomposition and maintain end-to-end requirements traceability. Support digital engineering initiatives throughout the system development lifecycle. Develop and maintain Concept of Operations (CONOPS) documentation and system behavior models. Support spacecraft commissioning and Launch and Early Orbit Phase (LEOP) activities. Collaborate with systems, software, hardware, integration, and operations teams to ensure mission readiness. Participate in architecture reviews, engineering trade studies, and technical design reviews. Support systems integration, verification, validation, and operational readiness activities. Prepare engineering documentation and communicate technical recommendations to stakeholders. Required Qualifications Demonstrated experience with Model-Based Systems Engineering (MBSE) . Hands-on experience with: SysML Cameo Systems Modeler Functional decomposition Requirements traceability Experience supporting Launch and Early Orbit Phase (LEOP) operations. Experience with spacecraft commissioning and/or routine satellite operations. Strong understanding of systems engineering principles and digital engineering methodologies. Excellent analytical, problem-solving, communication, and collaboration skills. Ability to work effectively in multidisciplinary engineering teams. Preferred Qualifications Experience developing Concept of Operations (CONOPS) documentation. Experience supporting LEO/MEO satellite systems or spacecraft development programs. Familiarity with digital engineering frameworks and MBSE best practices. Experience with satellite mission planning, systems integration, and spacecraft operations. Experience leading systems engineering trade studies and architecture reviews. What We're Looking For We're looking for an exceptional Model-Based Systems Engineer who combines deep MBSE expertise with real-world satellite operations experience . The ideal candidate has successfully applied SysML and Cameo Systems Modeler to develop robust system architectures while supporting spacecraft commissioning and LEOP activities. You are a collaborative systems thinker who can translate complex mission requirements into well-structured system models and deliver practical engineering solutions across the satellite lifecycle. Montreal-based, on-site candidates remain the preferred choice. However, truly exceptional candidates with outstanding MBSE and satellite operations experience may be considered for a fully remote arrangement. Candidates with both MBSE and LEOP experience will be given the highest priority, as these are mandatory qualifications for the role.

Location: Montreal, Canada 📍 Location: Montreal, Quebec, Canada 📄 Employment Type: Contract 🏢 Work Arrangement: Remote Opportunity for US and Canadian Citizens 🚀 Start Date: Immediate 💰 Compensation: TBD -- based on skills and experience Important Screening Requirements Must be legally authorized to work in Canada . Must be eligible to obtain the required security clearance. English proficiency is required. French is considered an asset. About the Role We are seeking an experienced CONOPS & Mission Analysis Systems Engineer to lead mission planning, systems engineering, and operational analysis for advanced LEO and MEO satellite programs. In this role, you will develop mission concepts, perform trade studies and mission analyses, define system requirements, and support system integration from concept through on-orbit operations. The ideal candidate has a strong background in satellite mission planning, systems engineering, and cross-functional technical leadership within the aerospace industry. Key Responsibilities Capture stakeholder functional, performance, environmental, and security requirements. Lead workshops and trade studies to define mission objectives and system requirements. Translate mission objectives into traceable system-level requirements. Define and manage spacecraft, payload, and ground segment interfaces, including ICDs and data flows. Develop and maintain the Concept of Operations (CONOPS) across all mission phases. Create mission timelines, operational scenarios, flow diagrams, and supporting documentation. Perform mission analysis, including orbit design, coverage analysis, link budgets, and resource assessments. Evaluate architectural trade-offs involving orbit selection, constellation design, payload configuration, cost, risk, and performance. Develop verification plans, validation procedures, and test matrices. Support system integration, verification, validation (IV&V), and operational readiness activities. Present technical results during major program reviews, including SRR, PDR, CDR, and ORR . Support mission operations, telemetry analysis, contingency planning, SOOH development, and operator training. Maintain configuration control using PLM tools. Support proposal development, technology roadmapping, and business capture activities. Mentor junior engineers and provide technical leadership across multidisciplinary teams. Required Qualifications Bachelor's degree in Aerospace Engineering, Electrical Engineering, Physics , or a related discipline. 8+ years of experience in LEO/MEO mission planning, mission analysis, or satellite operations . Strong background in: Systems Engineering Orbit Mechanics Space Environment Analysis Mission Planning and CONOPS Development Spacecraft, Payload, and Ground Segment Integration Hands-on experience with system integration, testing, troubleshooting, and operational support. Experience using Confluence and JIRA . Excellent analytical, communication, and problem-solving skills with the ability to work independently and lead cross-functional teams. English language proficiency is required. Preferred Qualifications French language proficiency. Experience supporting end-to-end satellite mission lifecycle activities. Experience leading technical trade studies and systems engineering reviews. Familiarity with Product Lifecycle Management (PLM) tools and configuration management. Experience supporting commercial or government satellite programs.

Location: Torrance, United States 📍 Location: Torrance, CA 📄 Employment Type: Full-Time 🏢 Work Arrangement: 100% On-site, Monday–Friday 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Important Screening Requirements BS or higher in Aerospace Engineering, Mechanical Engineering, Applied Physics, or a related field . 5+ years of aerospace thermal engineering experience . Experience supporting rocket, spacecraft, aircraft, missile, or other high-performance aerospace programs . Strong understanding of heat transfer, fluid dynamics, and high-temperature environments . Experience with electronic unit thermal analysis and control to component-junction temperatures. Ground testing experience involving thermal instrumentation and data acquisition . Strong MATLAB, Python, or similar programming skills. Experience with SolidWorks or Siemens NX . Experience preparing formal technical documentation. Ability to obtain and maintain a U.S. security clearance . Must be able to work on-site in Torrance, CA . About the Role We are seeking a Senior Thermal Engineer to lead thermal engineering methodology across advanced missile systems. This role covers thermal architecture, high-fidelity modeling, first-principles analysis, simulation, hardware testing, ground testing, and flight-test data analysis . You will work across aerodynamics, structures, electrical, propulsion, systems, manufacturing, and test engineering teams. What We’re Looking For We’re looking for a hands-on thermal engineer who can move between analytical modeling, hardware testing, and flight data while working across multiple engineering disciplines to solve challenging thermal problems. Key Responsibilities Perform thermal design and analysis of unmanned air vehicles from conceptual through detailed design. Define thermal system architectures and material-selection strategies. Perform thermal analysis using standard thermal-analysis codes and engineering/hand methods. Conduct transient thermal analysis for time-varying mission profiles. Plan, execute, and analyze specialized thermal ground testing. Plan and support flight testing and post-flight thermal data analysis. Develop MATLAB/Python models using first-principles methods to support engineering decisions. Collaborate with aerodynamics, structures, electrical, and systems engineers. Present thermal status during formal internal and customer reviews. Prepare specifications, test procedures, technical reports, and other formal engineering documentation. Required Qualifications BS or higher in Aerospace Engineering, Mechanical Engineering, Applied Physics, or a related field. In-depth understanding of heat transfer, fluid dynamics, and high-temperature environments . 5+ years of aerospace thermal engineering experience on rocket, spacecraft, aircraft, or missile programs. Experience with electronic unit thermal analysis and component-junction temperature control . Ground testing experience with thermal instrumentation and data acquisition. Strong programming skills in MATLAB, Python, or similar tools. Formal technical documentation experience. SolidWorks or Siemens NX experience. Ability to obtain and maintain a U.S. security clearance. Preferred Qualifications MS or higher degree with a focus on heat transfer and fluid dynamics. Material ablation-response modeling experience. Knowledge of material degradation and surface phenomena in demanding thermal environments. Experience with specialized thermal ground-test facilities. Flight-test experience, including instrumentation design and post-flight analysis. Experience with Thermal Desktop/SINDA . Experience with manufacturing and assembly of thermal systems. Active U.S. security clearance.

Location: Torrance, United States 📍 Location: Torrance, CA 📄 Employment Type: Full-Time 🏢 Work Arrangement: 100% On-site, Monday–Friday 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Important Screening Requirements Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, Aerospace Engineering, or a related field . Open to candidates across experience levels . Strong C/C++ programming experience. Experience with real-time operating systems (RTOS) . Familiarity with hardware/software integration and real-time system constraints. Experience with simulation and hardware-in-the-loop environments . Must be able to work on-site in Torrance, CA . Active or eligible for a Top Secret security clearance . U.S. work authorization and applicable export-control requirements apply. About the Role We are seeking Flight Software Engineers to design, develop, integrate, and test high-performance real-time embedded software for advanced flight systems. This is a hands-on engineering role focused on building robust software for demanding, safety-critical environments , while working closely with GNC, systems, and hardware teams. What We’re Looking For We’re looking for engineers who enjoy solving difficult real-time systems problems and can develop reliable flight software while working closely with hardware, GNC, and systems engineering teams. Key Responsibilities Design, develop, and test real-time embedded flight software . Collaborate with GNC engineers, systems engineers, and hardware teams. Develop and maintain software for high-reliability and safety-critical environments. Support simulation, hardware-in-the-loop, and flight testing . Participate in root-cause analysis and debugging across software and system interfaces. Follow rigorous software lifecycle and configuration-management practices. Support software verification and validation activities. Contribute to development processes, tools, and engineering standards. Evaluate emerging technologies and best practices relevant to flight software and real-time systems. Required Qualifications Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, Aerospace Engineering, or a related field. C/C++ programming experience. Experience with RTOS. Understanding of hardware/software integration. Familiarity with real-time system constraints. Experience with GNC systems or other control-intensive applications . Strong understanding of simulation and HIL testing. Excellent problem-solving skills and attention to detail. Ability to work effectively in a fast-paced multidisciplinary environment. Active or eligible for a Top Secret security clearance. Preferred Qualifications Flight software experience for missile, launch vehicle, or spacecraft systems . FPGA-based systems experience. Embedded software optimization experience. Secure software development or cybersecurity knowledge. Familiarity with agile or iterative development methodologies. Hands-on software verification, validation, and integration experience in defense environments.

Location: Torrance, United States As a Senior Thermal Engineer, you will own the thermal engineering methodology across our missile systems. You will define thermal architectures, develop high-fidelity thermal models, and use first-principles analysis, simulation, and hardware testing to ensure our vehicles perform reliably in some of the most demanding thermal environments imaginable. You'll work across aerodynamics, structures, electrical, propulsion, systems, manufacturing, and test engineering to develop integrated thermal solutions from concept through flight. Your work will span transient mission analysis, electronic unit thermal management, specialized ground testing, and flight-test instrumentation and data analysis. This role is ideal for an engineer who enjoys moving fluidly between analytical models, real hardware, and flight data—and who wants to directly influence vehicle architecture and design decisions from day one. RESPONSIBILITIES Thermal design and analysis of unmanned air vehicles at conceptual, preliminary, and detailed design maturities Define thermal system architectures and material selection strategies for vehicles operating in demanding flight environments Thermal analysis of flight vehicles using standard thermal analysis codes and engineering/hand methods Transient thermal analysis for time-varying mission profiles Ground test planning, execution, and analysis in specialized thermal test facilities Flight test planning, execution, and post-flight thermal data analysis Use first principles and MATLAB/Python models to inform design decisions Collaborate with aerodynamics, structures, electrical, and systems engineers on integrated solutions Present thermal status at formal reviews internally and with customers Prepare formal documentation (specifications, test procedures, technical reports) BASIC QUALIFICATIONS BS or higher degree in Aerospace Engineering, Mechanical Engineering, or Applied Physics In-depth understanding of heat transfer, fluid dynamics, and high-temperature environments 5+ years of experience in aerospace thermal engineering on rocket, spacecraft, aircraft, or missile programs Experience with electronic unit thermal analysis and control to component junctions Ground testing experience with thermal instrumentation and data acquisition Strong programming skills in MATLAB, Python, or similar for tool development Experience preparing formal documentation CAD experience with SolidWorks or Siemens NX Ability to obtain and hold a U.S. security clearance PREFERRED SKILLS AND EXPERIENCE MS or higher degree in Aerospace Engineering, Mechanical Engineering, or Applied Physics with focus on heat transfer and fluid dynamics Experience with material ablation response modeling in extreme thermal environments Knowledge of material degradation and surface phenomena under demanding conditions Experience with specialized thermal ground test facilities Flight test experience including instrumentation design and post-flight analysis Experience with Thermal Desktop/SINDA Experience with manufacturing and assembly of thermal systems Active U.S. security clearance

Location: Torrance, United States As a Flight Software Engineer, you will play a key role in designing, developing, and testing flight software that powers these advanced systems. You'll work closely with multidisciplinary teams to deliver high-performance, real-time embedded software that operates reliably under extreme conditions. This is a hands-on role for an engineer who thrives on solving hard problems, building robust systems from the ground up, and moving fast without compromising quality. RESPONSIBILITIES Design, develop, and test real-time embedded flight software for missile systems Collaborate with GNC engineers, systems engineers, and hardware teams to ensure seamless integration Implement and maintain software for high-reliability, safety-critical environments Support simulation, hardware-in-the-loop (HIL), and flight testing to validate performance Participate in root cause analysis and debugging across software and system interfaces Follow rigorous software lifecycle practices, including configuration management and verification Contribute to defining and improving development processes, tools, and standards Stay informed on emerging technologies and best practices relevant to flight software and real-time systems BASIC QUALIFICATIONS Bachelors or Master's degree in Computer Science, Electrical Engineering, Aerospace Engineering, or related field Experience: Open to candidates across all experience levels, from early-career engineers to senior technical contributors. Professional experience, internships, research, open-source contributions, or other hands-on technical work will be considered. Proficiency in C/C++ and experience with real-time operating systems (RTOS) Familiarity with hardware/software integration and real-time system constraints Experience working with GNC systems or similar control-intensive applications Strong understanding of testing practices including simulation and HIL environments Excellent problem-solving skills and attention to detail Ability to work effectively in a fast-paced, multidisciplinary team environment Active or eligible for a Top-Secret security clearance PREFERRED SKILSS AND EXPERIENCE Experience developing flight software for missile, launch vehicle, or spacecraft systems Exposure to FPGA-based systems and embedded software optimization techniques Knowledge of secure software development and cybersecurity best practices Familiarity with agile or iterative development methodologies Hands-on experience with software verification, validation, and integration in defense environments

Location: United States As a Senior Thermal Engineer, you will own the thermal engineering methodology across our missile systems. You will define thermal architectures, develop high-fidelity thermal models, and use first-principles analysis, simulation, and hardware testing to ensure our vehicles perform reliably in some of the most demanding thermal environments imaginable. You'll work across aerodynamics, structures, electrical, propulsion, systems, manufacturing, and test engineering to develop integrated thermal solutions from concept through flight. Your work will span transient mission analysis, electronic unit thermal management, specialized ground testing, and flight-test instrumentation and data analysis. This role is ideal for an engineer who enjoys moving fluidly between analytical models, real hardware, and flight data—and who wants to directly influence vehicle architecture and design decisions from day one. Responsibilities: Thermal design and analysis of unmanned air vehicles at conceptual, preliminary, and detailed design maturities Define thermal system architectures and material selection strategies for vehicles operating in demanding flight environments Thermal analysis of flight vehicles using standard thermal analysis codes and engineering/hand methods Transient thermal analysis for time-varying mission profiles Ground test planning, execution, and analysis in specialized thermal test facilities Flight test planning, execution, and post-flight thermal data analysis Use first principles and MATLAB/Python models to inform design decisions Collaborate with aerodynamics, structures, electrical, and systems engineers on integrated solutions Present thermal status at formal reviews internally and with customers Prepare formal documentation (specifications, test procedures, technical reports) Basic Qualifications: BS or higher degree in Aerospace Engineering, Mechanical Engineering, or Applied Physics In-depth understanding of heat transfer, fluid dynamics, and high-temperature environments 5+ years of experience in aerospace thermal engineering on rocket, spacecraft, aircraft, or missile programs Experience with electronic unit thermal analysis and control to component junctions Ground testing experience with thermal instrumentation and data acquisition Strong programming skills in MATLAB, Python, or similar for tool development Experience preparing formal documentation CAD experience with SolidWorks or Siemens NX Ability to obtain and hold a U.S. security clearance Preferred Skills and Experience: MS or higher degree in Aerospace Engineering, Mechanical Engineering, or Applied Physics with focus on heat transfer and fluid dynamics Experience with material ablation response modeling in extreme thermal environments Knowledge of material degradation and surface phenomena under demanding conditions Experience with specialized thermal ground test facilities Flight test experience including instrumentation design and post-flight analysis Experience with Thermal Desktop/SINDA Experience with manufacturing and assembly of thermal systems Active U.S. security clearance

Location: United States As a Flight Software Engineer, you will play a key role in designing, developing, and testing flight software that powers these advanced systems. You'll work closely with multidisciplinary teams to deliver high-performance, real-time embedded software that operates reliably under extreme conditions. This is a hands-on role for an engineer who thrives on solving hard problems, building robust systems from the ground up, and moving fast without compromising quality. Responsibilities: Design, develop, and test real-time embedded flight software for missile systems Collaborate with GNC engineers, systems engineers, and hardware teams to ensure seamless integration Implement and maintain software for high-reliability, safety-critical environments Support simulation, hardware-in-the-loop (HIL), and flight testing to validate performance Participate in root cause analysis and debugging across software and system interfaces Follow rigorous software lifecycle practices, including configuration management and verification Contribute to defining and improving development processes, tools, and standards Stay informed on emerging technologies and best practices relevant to flight software and real-time systems Basic Qualifications: Bachelors or Master's degree in Computer Science, Electrical Engineering, Aerospace Engineering, or related field Experience: Open to candidates across all experience levels, from early-career engineers to senior technical contributors. Professional experience, internships, research, open-source contributions, or other hands-on technical work will be considered. Proficiency in C/C++ and experience with real-time operating systems (RTOS) Familiarity with hardware/software integration and real-time system constraints Experience working with GNC systems or similar control-intensive applications Strong understanding of testing practices including simulation and HIL environments Excellent problem-solving skills and attention to detail Ability to work effectively in a fast-paced, multidisciplinary team environment Active or eligible for a Top-Secret security clearance Preferred Skills and Experience: Experience developing flight software for missile, launch vehicle, or spacecraft systems Exposure to FPGA-based systems and embedded software optimization techniques Knowledge of secure software development and cybersecurity best practices Familiarity with agile or iterative development methodologies Hands-on experience with software verification, validation, and integration in defense environments

Location: Montreal, Canada ROLE OVERVIEW Our client is seeking a CONOPS and Mission Analysis System Engineer to own the definition, development and documentation of CONOPS, mission scenarios, operational concepts and quantitative mission analyses for current and next‑generation earth observation and communications satellite missions. The engineer will work closely with customers, prime contractors and internal multidisciplinary teams to translate stakeholder needs into clear, traceable operational concepts that guide system architecture, requirements allocation, risk assessment and program planning . Requirements & Systems Engineering Capture stakeholder functional, performance, environmental, and security requirements. Conduct workshops and trade studies to define mission needs. Translate mission objectives into system-level requirements with full traceability. Define and manage spacecraft, payload, and ground-segment interfaces (ICDs, data flows). CONOPS & Mission Analysis Develop and maintain the Concept of Operations (CONOPS) covering all mission phases. Produce supporting artifacts (timelines, scenarios, flow diagrams). Perform mission modeling and analysis (orbit, coverage, link budget, resources). Evaluate architectural trade-offs (orbit, constellation, payload) across cost, risk, and performance. Integration, Verification & Program Support Develop verification plans, test matrices, and validation procedures. Support system integration, IVV activities, and operational readiness. Present technical results at key reviews (SRR, PDR, CDR, ORR). Maintain configuration control within PLM tools. Support B&P activities and technology roadmapping. Operations & On-Orbit Support Support mission operations during critical phases. Monitor telemetry, analyze performance, and update models/CONOPS as missions evolve. Assist with contingency handling, SOOH development, and operator training. Leadership & Collaboration Lead trade studies and coordinate cross-functional teams. Communicate risks and technical status to management and customers. Mentor junior engineers and contribute to process improvement initiatives. Qualifications B.Sc. in Aerospace, Electrical Engineering, or Physics with 8+ years in LEO/MEO mission planning & operations. Strong foundation in systems engineering, orbit mechanics, and space environment. Hands-on integration and troubleshooting experience. Experience with Confluence and JIRA. Strong analytical, communication, and independent working skills. English required; French is an asset.

Location: Montreal, Canada An experienced EMC/EMI system engineer (SME) with experience on conducted and radiated EMC/EMI analysis & tests at satellite level (for commercial application) to: Lead and produce system level analysis with pertinent hands-on experience and understanding/considering: Mission requirements (frequency bands of operation, type of payloads, coupling between antennas) Unit specs Spacecraft cavity geometry, MLI location, units’ arrangement on spacecraft panels Coupling effects between DC, RF connections and units Spacecraft Panel shielding effectiveness Support writing/reviewing the EMC/EMI satellite test plan Analysis to produce: CE/CS analysis (satellite auto-compatibility) RE/RS RF analysis (Satellite auto compatibility) RE/RS analysis (Launch Vehicle compatibility) Magnetic analysis Surface charging analysis (satellite level) Internal charging analysis (satellite level)

Location: Espoo Workplace: Hybrid ROLE HIGHLIGHTS: - Staff Mechanical Design Engineer - Location: Espoo, Finland - Department: Spacecraft Hardware - Reports to: Mechanical Design Engineering Team Lead - Employment type: Permanent - Workplace model: Hybrid / Office - Employment is subject to applicable security screening (incl. SUPO) WHY THIS ROLE MATTERS: At ICEYE, every satellite is a marriage of precision engineering and robust reliability. As we continue expanding both our operations and spacecraft platforms with more and more demanding mission requirements there is a need for an engineering professional who has extensive experience from mechanical engineering, system integration as well as manufacturing and qualification of space hardware. As a Staff Mechanical Engineer, you will be responsible for ensuring our engineering solutions will meet the stringent Aerospace quality requirements in terms of structural integrity, reliability and efficient and cost effective manufacturing. You will be an important part of our Spacecraft engineering community and help ICEYE continue building the world’s leading SAR satellite constellation. WHO WE ARE ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. YOUR DAY-TO-DAY RESPONSIBILITIES - Lead and contribute to trade studies, design reviews (PDR/CDR), and verification and production qualification documentation (PRR/ERR). - Ensure smooth, seamless and on time product delivery, from concept to qualification. - Contribute to the continuous improvements of our current products. - Collaborate with suppliers, supply chain, AIT engineering and QA department to ensure our products are compliant with launch and on-orbit environments. - Collaborate with system and subsystem engineers to define requirements for new products. - Collaborate with both internal and external engineering teams and AIT teams during product integration and build to validate the engineered solutions are meeting the set requirements and targets. Support issue resolution if and where necessary. - When needed, engage in broader spacecraft mechanical design tasks, providing cross-disciplinary support. WHAT WE’RE LOOKING FOR Must haves: - Master’s degree in Mechanical Engineering, Aerospace Engineering, or related field - Experience in aerospace, automotive, or related industries - Experience in designing satellites structures, subsystems or similar complex electromechanical systems - Understanding of mechanical stress, vibration, and thermal effects on space structures & mechanisms - Ability to work cross-functionally with systems, electrical, and manufacturing teams - Familiarity with industry standards such as ECSS, NASA, MIL - Strong team working, analytical, documentation, and communication skills - Ability to make multi team and organisational impact Nice to haves: - Experience with PLM/PDM systems for configuration control - Hands-on experience with mechanical systems assembly, integration, and testing - Prior experience with launch vehicle or spacecraft environments (SpaceX, Rocket Lab, ESA, etc.) APPLICATION PROCESS - Talent Attraction Introduction - Hiring Manager Alignment - Task Assignment - Technical Interview - Director Interview WORKING AT ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. HOW WE WORK (OUR VALUES) Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. BENEFITS Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Valencia Workplace: OnSite Role highlights: Title: Harness & Thermal AIT Engineer Department: Global Manufacturing Organisation Reports to: Head of MAITE Spain Location: Valencia, Spain Type of Contract: Permanent Working model: On-site Employment is subject to applicable security screening (incl. SUPO, where required) Why this role matters: As an AIT Engineer, Harness & Thermal, you play a vital role in ensuring the thermal and electrical integrity of ICEYE's satellite constellation. You will execute hands-on assembly, integration, and testing activities, from harness routing and MLI installation to structural alignment and mission-critical verification. Working across mechanical, electrical, and design teams, you will own technical issues on the production floor and contribute directly to the quality and reliability of spacecraft leaving Valencia ready for orbit. Who We Are ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth. ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system. ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific. Your day-to-day responsibilities - Assemble, route, and secure complex satellite electrical harnesses, ensuring compliance with routing standards and EMI/EMC best practices for grounding and shielding - Install and verify Multi-Layer Insulation (MLI) and thermal protection systems to specification - Conduct alignment, assembly, and verification of mechanical and thermal hardware across satellite production activities - Act as the primary point of contact for technical issues during harness routing and thermal assembly, leading troubleshooting of thermal and electrical connectivity faults - Collaborate with EMI/EMC engineering teams to optimise harness routing and shielding solutions that mitigate electromagnetic interference - Identify process issues and drive continuous improvement of thermal and harness production workflows, contributing to design-for-manufacturing (DFM) and design-for-testability (DFT) initiatives - Represent AIT Engineering across projects and disciplines on mechanical and thermal interface topics, ensuring alignment between production and design teams What we’re looking for Must haves: - 5+ years of hands-on experience in the development, integration, testing, or production of complex spacecraft hardware - Deep technical knowledge of harness manufacturing, routing standards, and thermal control materials including MLI - Familiarity with integration, verification, production ramp-up, and configuration management processes - Fundamental understanding of EMI/EMC principles and best practices for aerospace cabling and harness design - Systems engineering mindset, able to identify and resolve issues across mechanical, thermal, and electrical interfaces - Track record of enabling design-for-manufacturing (DFM) and design-for-testability (DFT) in a production environment - Strong English communication skills (written and spoken) for cross-functional collaboration Nice to haves: - Experience in multidisciplinary engineering environments with a strong cross-functional collaboration track record - Familiarity with aerospace standards (ECSS, IPC) and cleanroom practices - Experience with Atlassian Cloud tools (Jira, Confluence) - Lean and Six Sigma experience Application Process - Talent Acquisition Interview - Hiring Manager General Interview - Technical Interview, including a Technical Challenge - Final Interview Working at ICEYE At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win. How We Work (Our Values) - Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions. - See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins. Benefits Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. Our Commitment to Diversity, Equity, and Inclusion We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Long Beach, United States Your Mission on the Team: You will be responsible for the overall design and development of satellites for the Meridian Space constellation, from concept through on-orbit operation. This includes top level design, risk and cost assessment, systems engineering, testing and operations. As part of a small team tackling ambitious challenges, you’ll take full ownership of satellite performance in orbit - driving each phase of development to ensure mission success and dependable service delivery. Basic Qualifications: 5+ years professional design/development experience in satellite systems. Proven experience as a leader on at least one satellite program. Skill in using and creating software tools to model systems performance across a variety of disciplines (MATLAB, Python, Excel, etc.) Strong understanding of satellite technologies, design principles, and concepts of operations Bachelor’s degree in aerospace engineering or related field Strong interpersonal, verbal, and written communication skills Preferred Qualifications: 10+ years professional design/development experience in satellite systems Master's degree in Electrical or Systems Engineering, or related field Previous experience with spacecraft and/or space mission top level design Previous work on small LEO satellites Breadth of experience leading satellite systems development and testing Experience with creating satellite simulations and models Satellite operations experience

Location: Montreal, Canada Role overview: Our client is seeking a Satellite Bus System Engineer to design structural, thermal, power distribution, attitude control, propulsion, CD&H, TT&C/PDT, FSW and interface architecture that supports payloads and mission‑operations for current and next‑generation remote sensing and communications satellites. The role leads the definition, design, integration, verification and on‑orbit support of the platform subsystems, ensuring compliance to mission requirements and our client's best‑practice processes. Tasks summary: Architecture Concept & Requirements Translate mission‑level requirements (CONOPs, mass, volume, power, envelope, pointing, lifetime, redundancy, reliability…etc.) into system requirements and allocate them to platform subsystems (structures, TCS, EPS, GNC, PROP, C&DH, TT&C/PDT, FSW). Develop the Platform Architecture Description Document, Interface Control Documents (ICD) and Design Description. Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Lead trade studies for structural approach, thermal control concepts (MLI, heat pipes, radiators…etc.), power generation options (e.g. solar array & battery technologies). Concept Trade & Feasibility Detailed Design Oversee detailed design of all major subsystems (structures, TCS, EPS, PROP, C&DH, C&T, GNC, payload interfaces). Conduct failure‑mode‑effects‑analysis (FMEA) in support to FDIR, fault‑tree analysis and reliability & availability predictions. Ensure compliance with mission requirement and payload specifics. Maintain platform level performance budgets Support FSW and Satellite Reference Database developments Cross‑Functional Coordination, Stakeholder & Program Interaction Present technical status, risk analyses, and trade‑study results to senior management. Negotiate and maintain ICDs with payload and all platform subsystems. Support to DC & RF harness design, Platform and Payload layout. Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) Author verification plans, test matrices, and validation procedures for unit, subsystem, and platform level tests. Coordinate, supervise or support: o  Structural vibration, acoustic & shock testing o TCT & Thermal vacuum testing o  Power distribution functional test o  Closed‑loop test on avionic testbed Support FSW integration Technical Leadership & Mentorship Mentor, guide, lead a multidisciplinary team of junior or intermediate system engineers & interns Act as technical liaison with customers, partners and external vendors Act as Continuous Improvement stakeholder Contribute to client’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management Maintain platform‑wide standards (structural margin, thermal‑control, power‑bus architecture, redundancy philosophy…etc.). Ensure all artefacts, analysis, software, documentations and deliverables are version controlled in PLM environment. Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). Support Technology Road‑Mapping & Innovation Launch‑Site, On‑Orbit & Operations Support Support launch‑site interface checklists with LVI responsible engineer, pre‑launch checkout procedures, and early‑orbit checkout scripts. Provide real‑time platform engineering support during launch, on‑orbit commissioning, anomaly investigations and contingency operations. Support SOOH development and associated operator training. Required Qualifications: B.Sc. in Electrical Engineering, Aerospace or Physics with 10 + years of system design experience on LEO/MEO/GEO platforms. Deep knowledge of spacecraft bus subsystems and their interactions. Experience with power‑electronics design and high‑precision attitude‑control hardware. Strong understanding of aerospace system engineering fundamentals Hands-on individual who can support systems integration processes and capability to test systems and resolve problems Experience with Confluence and JIRA Demonstrated capability to efficiently work with little supervision Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Richmond, Canada 📍 Location: Richmond, BC, Canada 📄 Employment Type: Full-Time 🏢 Work Arrangement: Hybrid 🚀 Start Date: TBD 💰 Compensation: TBD — depending on skills and experience Important Screening Requirements Graduate degree in Electrical Engineering, Engineering Physics, Mathematics, Physics, or a related field , or an equivalent combination of relevant education and experience. 15+ years of experience working with radar, Synthetic Aperture Radar (SAR), or similar active imaging systems. Experience spanning hardware, processors, and/or data products within radar or SAR systems. 10+ years of experience in space systems engineering or a similarly complex systems engineering environment. Experience with SAR remote sensing , including system design, operations, applications/exploitation, and/or calibration. Experience working across engineering lifecycles for large, complex programs . Must be able to obtain and maintain Reliability Status security clearance and meet Controlled Goods Program (CGP) requirements. Strong problem-solving and analytical skills. Excellent verbal and written communication skills. Ability to communicate complex technical concepts to technical teams, executives, customers, and other stakeholders. Ability to work effectively within a large organization and navigate cross-functional dependencies. About the Role We are seeking a Staff Systems Engineer – Synthetic Aperture Radar (SAR) Missions to provide end-to-end technical oversight of SAR-related engineering activities throughout the lifecycle of complex space missions. This role will contribute to the development of advanced SAR missions that generate high-value imagery and actionable intelligence for customers. You will work across mission concept development, spacecraft and payload trade studies, SAR system design, mission-level integration and verification, commissioning, calibration, and early operations . This is a highly senior technical role requiring the ability to connect mission-level requirements with spacecraft systems, SAR payloads, processing systems, and end-user applications . What We're Looking For We’re looking for a Staff-level SAR systems engineer with extensive experience bridging SAR technology and space mission systems engineering . The ideal candidate has the technical depth to work across the SAR lifecycle—from mission concept and CONOPS through payload and spacecraft trade studies, image-quality analysis, integration, verification, commissioning, calibration, and early operations . This role requires someone who can operate comfortably at both the deep technical and mission/program levels , communicate with a broad range of stakeholders, mentor engineers, and provide technical guidance on complex SAR mission challenges. Key Responsibilities Mission Concept & Systems Engineering Provide end-to-end oversight of SAR-related engineering activities across the full lifecycle of a space SAR mission. Lead development of the Mission Concept of Operations (CONOPS) . Define high-level mission specifications based on user and customer requirements. Develop and assess spacecraft-level budgets supporting SAR payload requirements. Translate mission objectives into technical requirements and system-level solutions. SAR Mission Design & Technical Solutioning Lead technical solutioning for enhancements to existing and future SAR missions. Support and lead SAR beam-mode design . Develop and assess SAR mission concepts. Support SAR image-quality modeling and performance analysis. Evaluate technical solutions across mission, spacecraft, payload, processor, and application domains . Mission-Level Trade Studies Lead design trade studies across: Spacecraft systems Coverage and access SAR payload SAR processor End-user applications Evaluate technical, operational, and mission-level dependencies. Balance competing system requirements and performance objectives. Provide technical recommendations and guidance to program leadership. Risk Management, Integration & Verification Lead mission-level technical risk management. Oversee mission-level integration activities. Lead or support verification and validation activities. Identify technical dependencies, interfaces, and potential mission-level risks. Ensure SAR mission requirements and technical objectives are addressed throughout the engineering lifecycle. Commissioning, Calibration & Operations Provide technical leadership for SAR mission commissioning and calibration. Support early operations of space-based SAR missions. Contribute to the development and execution of mission commissioning strategies. Support resolution of technical issues during early mission operations. Apply SAR system knowledge to evaluate mission and image-quality performance. Technical Leadership Provide technical guidance to senior management and new business activities. Communicate complex SAR and space systems concepts to diverse audiences. Support customer discussions and technical presentations. Mentor and coach engineering team members. Help develop technical capabilities and domain expertise across the organization. Required Qualifications Graduate degree in Electrical Engineering, Engineering Physics, Mathematics, Physics, or a related discipline , or equivalent combination of education and relevant experience. 15+ years of experience with radar, SAR, or similar active imaging systems. Experience involving one or more of: Radar/SAR hardware SAR processors SAR data products 10+ years of experience in space systems engineering or a similarly complex systems engineering environment. Experience in SAR remote sensing , including system design, operations, applications/exploitation, and/or calibration. Experience working across engineering lifecycles for large and complex programs. Strong problem-solving and analytical capabilities. Excellent verbal and written communication skills. Ability to communicate effectively with technical teams, executives, customers, sales/business teams, and other stakeholders. Ability to work effectively within a large organization and navigate cross-functional dependencies. Ability to understand and manage diverse stakeholder needs. Ability to obtain and maintain Reliability Status security clearance . Ability to meet Controlled Goods Program (CGP) requirements. Preferred Qualifications Experience with MATLAB and/or Python . Strong understanding of satellite-based SAR payload design and operations . Experience with space mission design, including: Coverage and access Orbital dynamics Mission geometry Understanding of spacecraft design considerations, including: Thermal Power Pointing accuracy Spacecraft interfaces Strong understanding of geospatial data . Experience with SAR image-quality analysis and modeling . Experience working across SAR payload, spacecraft, processor, and end-user application interfaces . Ability to rapidly learn new technologies and domain-specific concepts.

Location: United States; Vancouver, Canada Our client, a global leader in Earth-observation satellites, is hiring a Staff Systems Engineer for its Synthetic Aperture Radar (SAR) missions. Fully remote from the US is fine for the first couple of years; relocation to the Vancouver, BC area later is optional, not required. What you will do • End-to-end oversight of SAR engineering across the full lifecycle of a SAR space mission • Own the mission concept of operations and high-level mission specs, including spacecraft budgets that drive the SAR payload • Lead technical solutions for current and future SAR missions: beam mode design, mission concept design, SAR image quality modelling • Lead mission-level risk management, integration, verification and validation • Run design trade-offs across spacecraft systems, coverage and access, SAR payload, SAR processor and end-user applications • Own the SAR side of commissioning, calibration and early operations • Advise senior management and new business; mentor the team What you need • Graduate degree in Electrical Engineering, Engineering Physics, Math or Physics (or equivalent experience) • 15+ years with radar, SAR or similar active imaging systems (hardware, processors and/or data products) • 10+ years in a space systems engineering or similar complex systems environment • SAR remote sensing experience: system design, operation, applications/exploitation and/or calibration • Strong communicator across technical, sales, executive and customer audiences • US citizen or permanent resident (export-control and Controlled Goods requirements) Nice to have : MATLAB, Python; satellite SAR payload design and operations; space mission design (coverage and access, orbital dynamics); spacecraft design (thermal, power, pointing); geospatial data.