Location: Espoo
Workplace: Hybrid
ROLE HIGHLIGHTS:
- Manufacturing Engineer (Electronics)
- Espoo, Finland
- Reports to Manufacturing & QA Team Lead
- Permanent
- Office
- Employment is subject to applicable security screening (incl. SUPO, where required)
The Mission of the Manufacturing Engineer
Your main focus will be to ensure that electronics prototypes are built correctly, efficiently, and on schedule, enabling ICEYE’s engineering teams to iterate quickly and with confidence.
This role acts as the bridge between design and manufacturing, translating engineering intent into manufacturable hardware by owning prototype execution, resolving issues early, and maintaining close technical collaboration with suppliers.
By enforcing high-quality documentation, proactively managing risks, and continuously improving prototype and NPI processes, the Manufacturing Engineer directly contributes to faster development cycles, higher build quality, and smoother transitions from prototype to production.
WHO WE ARE
ICEYE delivers space-based intelligence, surveillance, and reconnaissance (ISR) capabilities to governments and allied nations. This includes sovereign and turnkey ISR missions leveraging ICEYE’s world-leading synthetic aperture radar (SAR) satellite technology, as well as access to data from the world’s largest SAR satellite constellation. These capabilities enable partners to detect and respond to critical changes anywhere on Earth with unprecedented speed and accuracy – day or night and in any weather, supported by ultra high-resolution imagery and high-frequency revisits.
As a trusted partner for defense, intelligence, security, and maritime domain awareness, ICEYE’s near real-time data creates a tactical advantage for mission-critical operations. Designed for dual use, the platform also serves civil protection and commercial users for natural-catastrophe intelligence, insurance, maritime monitoring (including oil-spill detection), and finance, contributing to global security and community resilience.
ICEYE operates internationally with offices in Finland, Poland, Spain, Japan, the UAE, Greece, and the US. The company has more than 900 employees, inspired by the shared vision of improving life on Earth by becoming the global source of truth in Earth Observation.
EXPECTED OUTCOMES & REQUIREMENTS
OUTCOMES:
- Own the end-to-end execution of electronics prototype builds (PCB and PCBA), from design release to delivery.
- Act as the primary technical interface to PCB/PCBA suppliers, resolving manufacturing, quality, and documentation issues.
- Review and validate manufacturing documentation (BOMs, assembly data, drawings) to ensure completeness and manufacturability.
- Track prototype orders, schedules, and priorities, ensuring on-time delivery across multiple concurrent builds.
- Support material readiness and component management, including availability, alternates, and issue resolution.
- Verify incoming prototypes and coordinate rework, fixes, or rebuilds when required.
- Collaborate with R&D, ECAD, and Supply Chain to improve prototype and NPI processes.
- Contribute to long-term initiatives such as supplier onboarding, process standardization, and in-house prototyping capability.
WHAT WE’RE LOOKING FOR
- Bachelor’s or Master’s degree in Electronics Engineering, Electrical Engineering, or similar.
- Minimum 2 years of relevant experience in electronics manufacturing or design.
- Solid practical knowledge of Altium Designer and Altium 365.
- Understanding of PCB and PCBA manufacturing processes, DFM, and quality workflows.
- Good understanding of general electronics design principles, ability to interpret schematics and fabrication/assembly data.
- Familiarity with IPC, IEEE, JEDEC standards.
- Experience working with external suppliers and EMS partners
- Good organizational and documentation skills, attention to detail, and structured work style.
- Excellent communication and teamwork skills in a cross-functional engineering environment.
- Ability to organize workload, set priorities, and oversee both internal and outsourced ECAD library activities.
- Strong problem-solving mindset and hands-on attitude.
- Fluent written and spoken English.
Key Competences
In addition to the requirements above, we evaluate candidates on these key qualities throughout the hiring process:
- Intellectual Firepower: Rapidly comprehends, structures and synthesizes complex information, draws accurate conclusions, and communicates them with clarity.
- Passion & Work Ethic: Brings sustained motivation, resilience, and high personal standards to every challenge.
- Ownership & Action: Assumes full accountability for outcomes, acting decisively, and ensuring commitments are delivered.
- Team Player: Works collaboratively across teams, contributing to shared success, and engaging in constructive debate.
- Integrity & Growth Mindset: Operates with transparency and humility, learns from setbacks, and actively seeks opportunities to grow.
APPLICATION PROCESS
- Recruiter Interview
- Hiring Manager Interview
- Technical Assignment
- Stakeholder Interview
- Director Interview
WORKING AT ICEYE
At ICEYE, you will join a diverse and highly engaged team united by the ambition to make the impossible possible. We know that we will succeed only through exceptional people in our team, which is why your growth, wellbeing, and success are a priority.
As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. You will benefit from continuous professional development, training opportunities, and a culture that values collaboration, curiosity, and integrity. ICEYE is a place where your contributions have a visible impact, and where we celebrate success together.
BENEFITS (FINLAND)
- A job that matters in a dynamic Defence Technology and Earth Observation environment with a scale-up approach
- An independent role with a supportive and diverse work environment
- Occupational healthcare, occupational, and accident insurance
- A yearly benefit budget to spend as you wish (sport, transport, bike benefit, wellness, lunch, etc.)
- Phone subscription with iPhone of choice
- Relocation support (flight tickets, accommodation, relocation agency support)
- Time for self-development, research, training, conferences, or certification schemes
- Inspiring and collaborating offices and silent workspaces enable you to focus
OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION
We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table.
We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help.
Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.
ГибридEspoo; Relocation support (flight tickets, accommodation, relocation agency support)
Location: Poland; Stuttgart
Workplace: onsite
Ajax Systems is an international tech company and the largest manufacturer of security systems in Europe, with over 4.5 million end users and 330K PRO users in more than 180 countries worldwide. The company offers end-to-end solutions for protecting homes and businesses оf any scale. To date, Ajax product portfolio includes 280 devices for intrusion protection, video surveillance, fire and life safety, and comfort and automation. The company employs 5, 000 specialists.
The best software combined with powerful hardware has forever changed the perception of security systems for users and industry professionals. Being recognized at the biggest specialized exhibitions such as IFSEC, Expoprotection and Intersec, as well as winning prestigious awards from industry-leading media like PSI magazine and GIT SECURITY, today Ajax is one of the most awarded security systems in Europe.
Ajax Systems production includes four factories, two of which are located in Ukraine, one in Turkey and one in Vietnam. At the same time, the company's certification according to the ISO 14001 standard ensures a minimal impact of production on the environment. The selection of components for Ajax device manufacturing is determined by the presence of manufacturer declarations confirming compliance with RoHS requirements.
Responsibilities:
1. Manufacturing Standards & Governance
System Architecture:
Design, develop, and maintain a holistic Manufacturing System architecture.
Standardization:
Develop, approve, release, and regularly review manufacturing standards and procedures (including Workstation Standards, Gemba Management, Asaichi/Morning Meetings, Layered Process Audits (LPA), Leader Standard Work (LSW), and Daily Management Systems (DMS)).
Documentation Lifecycle:
Manage version control, communication, and formal release of all processes and operational procedures.
Audit & Compliance:
Conduct audits to track standard adherence, manage non-conformities/deviations, and evaluate overall implementation effectiveness.
2. Process Ownership
Core Process Ownership:
Serve as the end-to-end Process Owner for key manufacturing routines, including:
Daily Management, Shift Handover, Escalation Process, Production Meetings, Problem Solving, Visual Management, Change Management, and Continuous Improvement
.
Enablement & Training:
Lead training initiatives and guide teams on adopting new or updated processes.
3. Change Management Ownership
End-to-end ownership of all changes within the Manufacturing System, including:
Receiving change requests and assessing operational impact.
Facilitating approvals and running pilot testing at designated facilities.
Approving final versions, updating standard documentation, and orchestrating full rollout across all sites.
4. Plant Alignment & Governance
Maintain clear governance boundaries: establish corporate framework standards while supporting Plant Managers in site-level execution, compliance, and local training.
Collect, evaluate, and integrate continuous improvement proposals originating from plant operations.
Requirements:
Experience:
3–5+ years of relevant experience in
Operational Excellence, Lean Manufacturing, Continuous Improvement, or Manufacturing Engineering
within a multi-site or global manufacturing environment.
Methodology Expertise:
Deep knowledge of modern manufacturing system tools and routines (Daily Management, Gemba, Asaichi, LPA, Leader Standard Work, Root Cause Analysis / Problem Solving).
Change Management:
Proven track record of owning end-to-end change management frameworks across multiple plants (from pilot execution to global rollout).
Process Design:
Strong capability in designing process architectures, drafting clear governance documentation (SOPs, Processes & Procedures), and establishing audit systems.
Stakeholder Management:
Excellent communication and cross-functional leadership skills; ability to influence Plant Managers, facilitate training, and drive cultural alignment.
We Offer:
Opportunity to work in one of the most recognized and innovative security manufacturers.
Opportunity to take on new challenges, advance your career, and make a meaningful impact.
Opportunity to be part of a fast-paced and dynamic environment that encourages creativity, critical thinking, and the exploration of new ideas.
Location: Zakarpattia; Kyiv
Workplace: onsite
Ajax Systems — міжнародна технологічна компанія і найбільший у Європі виробник систем безпеки. Продуктам Ajax довіряють уже понад 4,5 мільйони кінцевих користувачів і 330 тисяч PRO-користувачів у більш ніж 180 країнах. Компанія пропонує комплексні рішення для захисту житлових і комерційних об'єктів різного масштабу. Нині портфоліо Ajax налічує 280 дротових і бездротових пристроїв для захисту від вторгнення, а також відеоспостереження, пожежної безпеки та комфорту й автоматизації.
Наша компанія — українська історія успіху і місце неймовірної сили та енергії.
Процес виробництва забезпечують п’ять департаментів: SMT-монтажу, монтажу, напівфабрикату, тестувань та готового продукту. А також експериментально-технологічний відділ та відділ контролю якості. На виробництві встановлено сучасні SMT та конвеєрні лінії, автоматизовано ключові процеси і постійно нарощуються потужності.
Ми прагнемо до повної відповідності європейським стандартам, тому забезпечуємо вам достойні умови праці, можливості розвитку та фінансову стабільність.
У зв’язку з активним розвитком компанії, ми шукаємо Head of Manufacturing Excellence.
Обов'язки:
1. Розробка та стандартизація (Manufacturing Standards & Governance)
Архітектура системи:
проектування, розвиток та підтримання цілісної архітектури Manufacturing System.
Стандартизація:
розробка, погодження, випуск та регулярний перегляд виробничих стандартів і регламентів (зокрема: робочі місця, Gemba Management, Asaichi, Layered Process Audit, Leader Standard Work, Daily Management System тощо).
Життєвий цикл документів:
управління контролем версій, комунікація та реліз нових процесів і процедур (Process & Procedure).
Контроль та аудит:
проведення аудитів застосування стандартів, управління відхиленнями та оцінка ефективності їх виконання.
2. Володіння процесами (Process Ownership)
Володіння ключовими операційними процесами:
Daily Management, Shift Handover, Escalation Process, Production Meeting, Problem Solving, Visual Management, Change Management, Continuous Improvement
.
Навчання та адаптація працівників щодо впровадження нових і оновлених процесів.
3. Управління змінами (Change Management Ownership)
Повний цикл управління змінами в Manufacturing System:
Прийом та оцінка впливу запитів на зміни.
Погодження змін та їх тестування на пілотному заводі.
Затвердження, оновлення стандартів та контроль системного
Rollout
на всі підприємства.
4. Взаємодія з заводами (Plant Governance)
Розмежування зон відповідальності: забезпечення корпоративного рамкового стандарту, поки Plant Managers відповідають за його локальне дотримання та виконання.
Збір та опрацювання пропозицій щодо покращень від заводів.
Вимоги:
Досвід:
від 3–5 років у галузі
Operational Excellence / Lean Manufacturing / Continuous Improvement / Manufacturing Engineering
на керівних або експертних позиціях.
Знання методологій:
глибоке розуміння інструментів та стандартів сучасної виробничої системи (Daily Management, Gemba, Asaichi, LPA, Leader Standard Work, Root Cause Analysis / Problem Solving).
Change Management:
практичний досвід централізованого управління змінами на декількох виробничих майданчиках (від пілоту до повного rollout).
Розробка процесів:
навички побудови процесної архітектури, створення чіткої регламентуючої документації (SOP, Process & Procedure) та систем аудиту.
Лідерство та комунікація:
вміння крос-функціонально взаємодіяти з директором заводів (Plant Managers), проводити навчання та фасилітувати впровадження змін.
Що на тебе чекає в команді Ajax:
Можливість бути частиною глобального проєкту;
Культура швидкого зворотнього звʼязку;
Конкурентна заробітна плата;
Офіційне працевлаштування;
Курси з вивчення англійської мови;
Медичне страхування;
Якщо ти готовий приєднатися до нашої команди, надсилай нам своє резюме!
Location: Clarksville, TN
Step into the innovative world of LG Electronics. As a global leader in technology, LG Electronics is dedicated to creating innovative solutions for a better life. Our brand promise, 'Life's Good', embodies our commitment to ensuring a happier life for all. We have a rich history spanning over six decades and a global presence in over 290 locations. Our diverse portfolio includes Home Appliance Solutions, Media Entertainment Solutions, Vehicle Solutions, and Eco Solutions. Our management philosophy, "Jeong-do Management," embodies our commitment to high ethical standards and transparent operations. Grounded in the principles of 'Customer-Value Creation' and 'People-Oriented Management', these values shape our corporate culture, fostering creativity, diversity, and integrity. At LG, we believe in the power of collective wisdom through an inclusive work environment. Join us and become a part of a company that is shaping the future of technology. At LG, we strive to make Life Good for Everyone.
FEs (Filed Engineers) effectively address quality issues arising in the market through regional market quality improvement activities (SVC riding, quality improvement, emergency response) and disseminate these findings to each department to support improvement.
- Identify customer pain points through SVC riding, respond on-site, identify areas for improvement, and support product improvement.
- Recover returned parts and deliver them to each business unit for improvement support.
- Quality product quality activities.
- Inspection and analysis of returned products.
- Training of returned product inspectors.
- Conduct warehouse audits to improve warehouse operations.
- Emergency response to quality issues.
JOB REQUIREMENTS
Bachelor degree Quality Engineer or Mechanical Engineer
Bilingual (Korean-English)
QAULAIFICATIONS
5 years of manufacturing quality experience
JOB REQUIREMENTS
Able to lift a maximum of 25 lbs. multiple times a day during a 10 hour shift.
Bend and stand in difficult positions up to 12 hours; Able to manipulate tools with both hands and stand for long hours.
.
Benefits Offered Full-Time Employees:
No-cost employee premiums for you and your eligible dependents for competitive medical, dental, vision and prescription benefits.
Auto enrollment with immediate vesting of competitive company matching contributions in a 401(k) Retirement Savings Plan with several investment options.
Generous Paid Time Off program that includes company holidays and a combined bank of paid sick and vacation time.
Performance based Short-Term Incentives (varies by role).
Access to confidential mental health resources to help you and your loved ones improve your quality of life. Personal fitness goal incentives.
Family orientated benefits such as paid parental leave and support for families raising children with learning, social, behavioral challenges, or developmental disabilities.
Group Rate Life and Disability Insurance.
Benefits Offered Temporary/Contractors:
Eligible for the relevant benefit programs offered through our partner agencies.
Privacy Notice to California Applicants
Applicants who need assistance or a reasonable accommodation during the hiring process may contact our team by phone at: 973-477-7090 or
support@lg4me.freshdesk.com.
This email and phone number will only reply to accommodation requests and is not intended for general employment inquiries.
All qualified applicants will be considered for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by applicable federal, state, or local law.
In addition to the above, LG believes that pay transparency is a key part of diversity, equity, and inclusion. Our salary ranges take into account many factors in making compensation decisions including but not limited to skillset, experience, licensure, certifications, internal equity, and other business needs. While we consider geographic pay differentials in final offers, because we operate in many geographies where applicable, the salary range listed may not reflect all geographic differentials applied
.
Location: United States- Fort Worth, Texas
Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.
Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor.
Principal Duties/Responsibilities:
· Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools.
· Identifies and sources parts, supplies and repair items as necessary.
· Independently performs maintenance as per industry standards.
· May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks.
· Complies with 5S and housekeeping standards.
· Drives and participates in CI activities - processes, results and cost savings.
· Updates records and reviews CMMS history.
· Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems.
· Utilizes predictive maintenance technologies to collect equipment performance data.
· Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development.
· Completes on-the-job and technical self-study programs for career development.
· Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions.
Knowledge, Skills, Abilities, & Behaviors Required:
· High School Graduate or equivalent (GED).
· Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program.
· Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs.
· Must be able to use basic hand tools and specialized tools as appropriate
· May be required to travel.
Physical Demands and Working Conditions:
While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.
ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.
Pay Range
$30.25
—
$38.68 USD
ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy
here.
ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí
here.
Location: United States- Jonesville, South Carolina
Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.
Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor.
Principal Duties/Responsibilities:
· Promotes and adheres to ATS Beyond Zero Safety culture
· Primary focus on site level Work Execution Management processes
· Perform daily sync with supervisors/Crew Leads to validate incoming work requests
· Evaluates non-emergency work requests, develops scope of work, and inspects job location to determine job requirements.
· Estimates labor hours, skills, parts, materials, equipment and special tools required to complete proactive jobs in a safe and efficient manner.
· Gathers relevant technical documentation such as drawings, schematics, specifications, spare parts lists from equipment histories, OEM manuals and the Knowledgebase system. Verifies the availability of parts prior to scheduling the job. Arrange for special tools and auxiliary equipment when required
· Maintains a planned and organized ready work order backlog at or above 4 weeks of crew available capacity.
· Conducts weekly scheduling meetings with production to determine work order priorities, communicate work order status and alter planned maintenance activities if necessary.
· Creates a weekly technician schedule that includes priority planned jobs that utilize 100% of the available technician labor hours for upcoming week.
· Employs the cycle of continuous improvement process to create/update reusable Job Plans with technician feedback.
· Trains site employees on CMMS and ensures that it is working with integrity and is being utilized.
· Responsible for maintaining the integrity of equipment data (Bill of Materials) in CMMS
Knowledge, Skills, Abilities (KSAs), & Competencies:
Essential KSAs:
· Associate Degree required in a technical field with 1 year of maintenance scheduling / planning experience and/or 3 years as a machine repair technician, or equivalent combination of both
· Familiar with industrial manufacturing environment
· Electrical/mechanical aptitude
· Proficiency with computers, maintenance systems, and applications including Microsoft Office
· Excellent verbal communication, facilitation, and presentation skills
· Ability to build and maintain positive, professional relationships
Desirable KSAs:
· Desire to develop leadership attributes
· Experience in job plan development, job scheduling, and work execution management
· Project management and capital project experience preferred
· CMRP certification
· Green Belt certification
· STS certification
Competencies:
· Safety Leadership
· Drive & Motivation
· Interpersonal Skills
· Task Management
· Strategic Skills
· Customer Focus
Physical Demands and Working Conditions:
While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.
ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.
Pay Range
$67,151.83
—
$85,881.27 USD
ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy
here.
ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí
here.
Location: United States- Muskegon, Michigan
Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.
Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor.
Principal Duties/Responsibilities:
· Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools.
· Identifies and sources parts, supplies and repair items as necessary.
· Independently performs maintenance as per industry standards.
· May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks.
· Complies with 5S and housekeeping standards.
· Drives and participates in CI activities - processes, results and cost savings.
· Updates records and reviews CMMS history.
· Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems.
· Utilizes predictive maintenance technologies to collect equipment performance data.
· Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development.
· Completes on-the-job and technical self-study programs for career development.
· Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions.
Knowledge, Skills, Abilities, & Behaviors Required:
· High School Graduate or equivalent (GED).
· Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program.
· Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs.
· Must be able to use basic hand tools and specialized tools as appropriate
· May be required to travel.
Physical Demands and Working Conditions:
While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.
ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.
Pay Range
$27.37
—
$35.01 USD
ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy
here.
ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí
here.
Location: Córdoba, Spain
Our client is a global manufacturer of plumbing, heating, air-conditioning, and refrigeration (PHAR) fittings and valves, with a manufacturing footprint across multiple European sites and a long-standing reputation for engineering excellence and reliability.
This role is accountable for the operational, financial, and strategic performance of all European manufacturing facilities, with additional responsibility for coordinating effectively with the group's Asian manufacturing partners. You will report directly to the Group CEO, and your primary objective will be to achieve or exceed budgeted performance across every facility while maintaining safe, efficient, cost-competitive, and customer-focused operations.
This is a senior operational leadership role suited to someone with a strong engineering and manufacturing background and proven multi-site leadership experience. The role demands the energy and organizational capability to lead a demanding international manufacturing operation, with frequent business reviews and regular international travel across Europe and Asia.
Responsibilities:
Ensuring every manufacturing facility achieves its budgeted operational, quality, and safety targets
Owning manufacturing costs across all sites and driving continuous improvement in cost competitiveness
Ensuring products consistently meet customer and regulatory quality requirements
Working closely with the Supply Chain Director to deliver customer service commitments and execute the approved production plan
Preparing, justifying, executing, and monitoring capital investment projects across the manufacturing footprint
Ensuring alignment, performance, and supply reliability from Asian manufacturing operations, including regular supplier performance reviews
Maintaining a safe working environment and full regulatory and environmental compliance across all sites
Leading and developing the manufacturing leadership team, including succession planning and employee engagement
Collaborating closely with Commercial, Sales, Supply Chain, and the Executive Leadership team on cross-functional improvement projects
Delivering monthly performance reporting to the CEO, escalating significant risks promptly, and maintaining a rolling 12-month manufacturing improvement plan
This role can be based in Wetzlar or Attendorn, Germany, Cordoba, Spain, or Poznan, Poland, and involves extensive international travel across Europe and Asia.
Requirements
Proven international, multi-site manufacturing leadership across Europe, with responsibility for operational, financial, and strategic performance
An engineering degree (Mechanical, Manufacturing, Industrial, or equivalent) is required; an MBA, postgraduate business qualification, or Lean Six Sigma Black Belt is a plus
A demonstrable track record of improving productivity, cost, quality, safety, and profitability through Lean manufacturing, operational excellence, and continuous improvement
Experience managing large operational budgets and manufacturing P&L
Experience managing capital investment projects, including justification, execution, and post-investment review
A commercially astute leader capable of influencing executive stakeholders and leading cross-functional collaboration across Manufacturing, Supply Chain, Sales, and Finance
Experience coordinating with manufacturing partners or suppliers outside your home region, ideally including experience with Asian manufacturing operations
Experience presenting operational and financial performance to CEO or Board-level stakeholders
Excellent communication skills, with fluent spoken and written English
Strong leadership and people development skills, including experience building succession plans for key roles
Willingness and ability to undertake extensive international travel across Europe and Asia
Experience within the plumbing, heating, air-conditioning, and refrigeration (PHAR) sector, valves, fluid control, or related industrial or automotive Tier 1 manufacturing is helpful but not required
Benefits
Base salary range €110,000 to €135,000.
Annual bonus scheme, incremental up to a maximum of 40% of base salary, based on budget being reached and above
Paid leave ranges from 21 to 30 days annually depending on location
Keller is a recruitment agency that provides services to clients ranging from startups and non profits to multinational corporations. Keller emphasizes ethical search processes, attentive candidate care, and leadership placements that support long-term client outcomes.
To learn more about the firm and about our candidate services - please visit
https://www.kellerexecutivesearch.com/executive-recruitment-headhunters-spain-madrid-and-barcelona/
Equal Employment Opportunity and Non-Discrimination Policy (Spain)
Equal Opportunity Statement:
Both Keller Executive Search and our clients are committed Equal Opportunity Employers. For all positions, whether with Keller Executive Search or our clients, qualified applicants will receive consideration for employment without regard to race, ethnicity, religion or belief, sex, sexual orientation, gender identity or expression, marital status, pregnancy or maternity, disability, age, or any other characteristic protected under Spanish law, including the Workers' Statute (Estatuto de los Trabajadores) and Law 15/2022 on equal treatment and non-discrimination.
Commitment to Diversity:
Keller Executive Search and its clients are committed to fostering a diverse and inclusive work environment where all individuals are valued and respected.
Reasonable Adjustments:
Both Keller Executive Search and our clients are committed to providing reasonable adjustments for candidates and employees with disabilities, in accordance with Spain's General Law on the Rights of Persons with Disabilities (Real Decreto Legislativo 1/2013). We engage in an interactive process with candidates to identify effective, reasonable adjustments throughout the recruitment process.
Compensation Information:
For client positions, compensation information is available in the job post where possible. Where a salary range is not published, it will be discussed during the interview process. Actual salary will depend on skills, experience, and internal benchmarking for comparable roles at the client organisation, and may vary by role and location.
Right to Work:
Both Keller Executive Search and our clients comply with Spanish right to work legislation. All successful candidates will be required to provide evidence of their right to work in Spain, or in the relevant jurisdiction, before an offer of employment is confirmed.
Compliance with Spanish Employment Law:
Both Keller Executive Search and our clients comply with applicable Spanish employment legislation, including the Workers' Statute (Estatuto de los Trabajadores), Law 15/2022 on equal treatment and non-discrimination, and other relevant statutory requirements. This applies to all stages of employment, including recruitment, hiring, promotion, and termination.
Workplace Harassment:
Both Keller Executive Search and our clients expressly prohibit any form of workplace harassment or discrimination based on any protected characteristic under Spanish law.
Data Protection and Privacy:
Both Keller Executive Search and our clients process candidate personal data in accordance with the EU General Data Protection Regulation (GDPR) and Spain's Organic Law 3/2018 on Data Protection and Digital Rights Guarantee (LOPDGDD). For more information about how we collect, use, and store your personal information for recruitment purposes, please review our Privacy Policy.
Pay Equity:
Both Keller Executive Search and our clients are committed to pay equity and comply with Spain's pay transparency and equal pay obligations, including the pay register (registro retributivo) requirements under Royal Decree 902/2020.
Veteran Status:
Both Keller Executive Search and our clients provide equal employment opportunities to veterans and comply with applicable Spanish laws regarding employment consideration for veterans, where relevant.
Use of AI in Recruitment:
Keller Executive Search and our clients may use artificial intelligence (AI) tools to assist in the recruitment and candidate evaluation process. These tools are used exclusively to support human decision-making by helping to review and assess candidate qualifications and materials. AI is never used to automatically reject, disqualify, or make final hiring decisions about candidates. All AI-assisted evaluations are reviewed by experienced recruitment professionals, and all hiring decisions are made by qualified human recruiters, in line with our obligations under Spanish and EU data protection law regarding automated decision-making.
Note:
This job posting may be for a position with Keller Executive Search or one of our clients. The specific employer will be identified during the application and interview process. Employment laws and requirements may vary depending on the employer and location.
Location: Pasir Gudang, Malaysia
Our Client
Our client is a Singapore-based multinational food and beverage company specializing in the production and distribution of instant beverages, particularly coffee mixes and non-dairy creamers. With a strong presence across Asia, Eastern Europe, and other emerging markets, the company focuses on delivering affordable, mass-market products while continuously optimizing cost efficiency and product formulations. Its operations are supported by manufacturing facilities, including in Malaysia, and it actively competes with Chinese producers by exploring innovations in ingredients and production processes to maintain competitiveness in pricing and quality.
Key Responsibilities
Conduct research on current consumer market trends and emerging technologies to support the development of new food products.
Establish and optimize production applications to ensure new products can be successfully transferred into manufacturing.
Plan and conduct production trial runs, prepare trial reports and analysis, and carry out product evaluation and testing to assess product performance, quality, and feasibility.
Ensure all product development activities comply with existing technical specifications, quality standards, and company procedures.
Conduct shelf-life studies for newly developed products to validate product stability and quality over time.
Support the implementation, maintenance, and continuous improvement of the Quality Management System (QMS) and Food Safety Management System (FSMS).
Ensure compliance with food safety standards and certifications, including
HACCP, GMP, FSSC 22000, BRC, IFS, and Halal
requirements.
Act as the team lead in the absence of the
R&D Assistant Manager
, providing guidance and ensuring continuity of day-to-day operations.
Requirements
Bachelor's Degree in Food Technology, Chemical Engineering, Bio-Process Engineering, or a related discipline in Food Research & Development.
3+ years of prior experience within a food manufacturing environment handling non-dairy creamers (NDC).
Familiarity with food safety and quality management standards is preferred.
Willing to be based and work in Tanjung Langsat, Pasir Gudang, Johor.
Strong analytical, problem-solving, and organizational skills.
Good communication and teamwork abilities, with the capability to work effectively in a cross-functional environment.
Proactive, detail-oriented, and able to work independently while managing multiple priorities.
Location: United States- Bellwood, Illinois
Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.
Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor.
Principal Duties/Responsibilities:
To Live and Lead Safety
· Takes responsibility for employee safety and wellness by deploying the ATS safety program and ensuring effective completion of safety training, observations, and incident investigations.
· Implements and actively supports all Beyond Zero initiatives
· Enables the growth of a customer safety culture by a fostering a safety partnership and sharing best practices
To Inspire and Provide Clarity on Vision and Strategy
· Motivates employees by communicating a clear vision that enables all employees to understand the rationale for, and the benefit of, both site-level and company-wide objectives
· Acts as an effective change agent, leading the implementation of strategic initiatives through positive team communications, appropriate action planning, and successful implementation activities
· Understands and appropriately articulates both ATS and customer strategies, providing the team with line of sight between team responsibilities and strategic outcomes
To Own Our ATS Culture
· Builds positive relationships with ATS employees, customers, and peers through open communication and role-modeling the ATS leadership core competencies of honesty and respect
· Sets a positive, influential standard for others and creates a constructive climate for their team
· Influences with transparency and use participative methods to ensure that decisions are understood and accepted
· Establishes a positive work environment through managing and personalizing onboarding; engaging in ongoing one-on-one communications; and recognizing individual contributions and achievements on a timely basis
· Adheres to policies and procedures and ensures that staff understands the rationale behind policies and processes
To Support Our Employees’ Learning and Growth
· Leads and builds team capabilities by working with individuals on performance improvement, career planning, training, and skills development.
· Develops, communicates, and executes a Skills Matrix and Technician Training Plan
· Builds and maintains a succession plan for key positions (i.e., Supervisors, Supply Chain, P/S, RE)
To Ensure and Drive our Business Results
· Leads and ensures the Operating System is understood, reinforced, and embedded
· Develops and executes a site-specific maintenance plan per ATS standards
· Manages financial performance of the site (revenue, expenses, and profit) to achieve set objectives
· Develops and maintains effective relationships with all ATS business units, fully utilizing their services and ensuring cross-functional alignment
· Collaborates with and builds customer relationships to ensure priority alignment and proactively anticipates customer needs as the primary on site contact
· Ensures alignment of customer expectations and ATS site goals through management of site-specific contracts
· Communicates with the customer through daily, weekly, and monthly meetings and conducts a regular review of the performance metrics with the customer
· Drives a continuous improvement methodology and promotes cost savings
· Analyzes and reports on key performance indicators, completing root cause analyses and developing and executing action items while removing barriers and addressing issues
· Collaborates with sales and operations leadership to increase the scope of services
Knowledge, Skills, Abilities (KSAs), & Competencies:
Essential KSAs:
· Bachelor’s degree in technical, business, or a related field preferred or seven years of operations / maintenance experience
· Three years of supervisory experience with a strong focus on development of employees
· Resilient and flexible, able to multitask and prioritize with an innate ability to understand and accept change and motivate others around change
· Highly tuned emotional intelligence with demonstrated ability to build relationships and lead teams with honesty and integrity to achieve goals
· Solid understanding of manufacturing / assembly work environment
· Business acumen
· Positive influencer with appropriate levels of organization.
· Strong customer focus with the ability to build positive business relationships and show a sense of urgency
Desirable KSAs
· Manufacturing maintenance experience preferred with related certifications and training
· Good understanding of, and/or experience with, proactive/reliability maintenance processes, i.e., Planning/Scheduling, P/M, PdM, and root cause analysis, and continuous improvement methodologies
· Good computer skills, including Microsoft applications and web-based applications such as Power BI, GEAC, Concur, Workday and related software
· Time management skills
· Ability to relocate to specified locations
· Excellent communications skills (verbal, written, and presentation)
· Agile, curious learner and authentic, credible teacher
· Financial acumen and knowledge of forecasting and managing budgets
Leadership Core Competencies:
Business and Company Acumen
Lead with honesty and integrity
Build bold and relevant strategies
Welcome and motivate change
Recognize the right outcomes and how they were achieved
Role model safety and wellness
Emotional Intelligence
Provide psychological safety
Be self-aware
Build relationships
Ask for and act on feedback
Respect diverse background and viewpoints
Lead in the Present; Eye to the Future
Commit to accountability
Coach people to their potential
Own talent development and placement
Turn problems into opportunities
Be resilient and flexible
Communicate, Communicate, Communicate
Practice transparency
Build relationships through respect
Be a curious learner and credible teacher
Influence in a proactive, positive way
Ensure cross functional awareness/decisions
ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.
Pay Range
$135,372.76
—
$180,497 USD
ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy
here.
ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí
here.
Location: Valencia
Workplace: OnSite
ROLE HIGHLIGHTS:
• Manufacturing Technician, Unmanned Aircraft (Fabrication and Integration)
• Location: Valencia, Spain
• Department: HAPS
• Reports to: Head of Manufacturing
• Employment type: Permanent
• Workplace model: Onsite
• Employment is subject to applicable security screening (incl. SUPO, where required)
WHY THIS ROLE MATTERS:
As Manufacturing Technician on the HAPS team, you will be hands-on at the heart of building something genuinely unprecedented — a stratospheric, unmanned electric aircraft that will set a new mark in aviation history. Your work spans the full breadth of assembly and integration: fabricating lightweight carbon fibre composite structures, building cable harnesses and high-density battery packs, integrating avionic subsystems, and running end-to-end ground tests to verify that every system is ready to fly. Beyond the build itself, you will play an active role in developing and refining the assembly and testing processes that will carry this programme from early prototypes into a mature, repeatable production flow — working closely with engineers to transition new designs from drawing board to reality.
WHO WE ARE
ICEYE delivers space-based intelligence, surveillance, and reconnaissance (ISR) capabilities to governments and allied nations. This includes sovereign and turnkey ISR missions leveraging ICEYE’s world-leading synthetic aperture radar (SAR) satellite technology, as well as access to data from the world’s largest SAR satellite constellation. These capabilities enable partners to detect and respond to critical changes anywhere on Earth with unprecedented speed and accuracy, day or night and in any weather, supported by ultra high-resolution imagery and high-frequency revisits.
As a trusted partner for defense, intelligence, security, and maritime domain awareness, ICEYE’s near real-time data creates a tactical advantage for mission-critical operations. Designed for dual use, the platform also serves civil protection and commercial users for natural-catastrophe intelligence, insurance, maritime monitoring including oil-spill detection, and finance, contributing to global security and community resilience.
ICEYE is headquartered in Finland and operates globally across Europe, North America, the Middle East, and Asia-Pacific. We have more than 900 employees, united by a shared vision: improving life on Earth by becoming the global source of truth in Earth Observation.
YOUR DAY-TO-DAY RESPONSIBILITIES
- Assembly of large, but very lightweight unmanned aircraft
- Fabrication of lightweight aircraft structures/components and building CFRP composite parts
- Development of new assembly, integration and testing processes, and tools for an ultra-light UAV
- Manufacturing of electronics assemblies and sub-level components (such as cable harness manufacturing and battery manufacturing of state-of-the-art high power density batteries)
- Transitioning new designs from engineering to manufacturing
WHAT WE’RE LOOKING FOR
Must haves:
- 2+ years of relevant experience as an electrical/electromechanical/electronic technician with a hands-on approach
- Experience with mechanical prototyping (3D printing, using basic mechanical workshop equipment)
- Basic knowledge of CAD tools
- Good command of the English language, both oral and written
Nice to haves:
- Hands-on experience in aircraft, robot, race car or similar system prototyping & manufacturing
- Good systems and physics understanding
- Experience with composites
- Experience working with electronic equipment (prototype boards, harness, test setups)
- Development of process improvements and setups to improve cycle times, repeatability, and maturity
- Proactive, can-do attitude
- Curiosity and passion about technology
APPLICATION PROCESS
• TA Partner Screen Call
• Hiring Manager Interview
• Technical Interview
• Values & Fit Interview
• SVP of Engineering Interview
WORKING AT ICEYE
At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win.
HOW WE WORK (OUR VALUES)
Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way.
• Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the why behind decisions.
• See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others.
• Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions.
• Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift.
• Have fun: What we do matters and it should be enjoyable. Celebrate progress, take pride in results, and share the wins.
BENEFITS
Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process.
OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION
We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table.
We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us and we will do our best to help.
Apply now to start your ICEYE journey and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.
Location: Greer, SC
About Maddox
Maddox is the nation’s leading provider of electrical transformers to the commercial and industrial market, with primary locations in South Carolina, Washington State, Texas, Idaho, and Ohio. We have been recognized by
Inc. Magazine
as one of the fastest-growing companies in America for the past 8 years and counting.
Maddox was founded on Christian values, and we are serious about investing in the people, processes, and culture that make this a great place to work. We build real things, solve real problems, and expect professionalism, competence, and integrity from our team.
Discover more at:
https://www.youtube.com/@MaddoxTransformer
https://www.maddox.com/
About Maddox + You:
Reporting directly to the Facilities and Equipment Manager for the newly formed Maddox PRO (Professional Resource Organization). The purpose of Maddox PRO is to provide various shared services to Maddox Industrial Transformer and other projects and businesses under common ownership to Maddox Industrial Transformer LLC (MIT). Currently, PRO provides and coordinates all maintenance and upkeep functions for all real estate assets in the owner’s portfolio. The vision is to expand these functions to larger industrial and/or commercial operations.
The successful candidate will have knowledge of standard maintenance processes and inspection processes for mechanical, electrical, and plumbing systems, strong handyman skills, and project management abilities. If you are excited about being on the ground level of expanding business operations, bring a problem solving mindset and have maintenance experience, this role provides a lot of upside for career growth.
We are seeking an experienced, highly capable Maintenance Technician to join our growing Facilities & Equipment team. The successful candidate will be responsible for conducting routine inspections of facilities and equipment as well as performing repairs and scheduling maintenance, with regular travel between locations within the local to which they are hired. Primarily a shop/indoor environment with occasional outdoor work as necessary.
If you are a motivated self-starter who enjoys working with your hands to fix and prevent problems and are looking for a rewarding career with a local company, we encourage you to apply for this position. Please submit your resume and cover letter for consideration.
More about You:
Your key responsibilities will include:
Conducting routine inspections of facilities and equipment
Performing prescribed preventative maintenance for facilities and equipment
Performing basic repairs of facilities and equipment as necessary
Coordinating contractors when repairs are beyond the capabilities of in-house service
Being an onsite liaison for large projects on an as-needed basis
Other duties as assigned by the Facilities and Equipment Manager
Experience & Education:
Strong mechanical, electrical, and plumbing background
Ability to prioritize many tasks and initiatives
Valid drivers licence
Excellent organizational and time-management skills
Exceptional written and verbal communication skills
Pro Tip:
We get a LOT of applicants, so if you want to stand out, write a few sentences telling us what stood out to you, and why you think you’d thrive in this particular opportunity.
Compensation & Benefits
Pay range = (wages + bonus)
Comprehensive full-time benefits package averaging
$20,000+ per year
(amount varies based on age, family size, and eligibility), including:
Health & wellness benefits (insurance or cash-in-lieu options)
Paid maternity and paternity leave
401(k) with 100% match up to 8% of wages
Paid holidays, PTO, and family-life gifts
Vision, dental, disability, life insurance, and other voluntary benefits
Annual Range
$60,000
—
$75,000 USD
Location: Dammam, Saudi Arabia
We are seeking a skilled Deburring & Marking Technician to perform deburring, surface finishing, and part marking activities on machined and fabricated components. The successful candidate will ensure components meet quality standards by removing burrs, sharp edges, and surface imperfections while accurately marking parts in accordance with engineering drawings, specifications, and customer requirements.
Key Responsibilities
Perform deburring, edge breaking, and surface finishing of machined and fabricated components using hand and power tools.
Remove burrs, sharp edges, excess material, and surface defects without affecting dimensional accuracy.
Mark components using approved methods such as stamping, engraving, vibro-etching, or laser marking as per engineering drawings and specifications.
Read and interpret engineering drawings, work instructions, and marking requirements.
Inspect finished components to ensure compliance with quality standards and customer specifications.
Qualifications
High school diploma or equivalent.
Technical or vocational training in mechanical or manufacturing disciplines is an advantage.
Experience
Minimum
2–5 years
of experience in deburring and marking of machined or fabricated components in a manufacturing, fabrication, oil & gas, or heavy engineering environment.
Skills & Competencies
Experience using deburring tools, grinders, files, rotary tools, and polishing equipment.
Knowledge of part marking methods such as stamping, engraving, vibro-etching, or laser marking.
Ability to read engineering drawings and manufacturing specifications.
Familiarity with measuring instruments such as vernier calipers and micrometers.
Strong attention to detail and commitment to quality.
Good understanding of workplace safety and housekeeping practices.
Location: Dhahran, Saudi Arabia
Eram Talent is seeking a detail-oriented and highly skilled
CNC Coolant Filling Technician
with specific experience in Post Weld Heat Treatment (PWHT) plant environments. The successful candidate will be responsible for the comprehensive management, preparation, and maintenance of metalworking fluids and coolants for high-precision CNC machinery. This role is critical to maximizing tool life, ensuring machining quality, and maintaining safe, continuous operations within a heavy industrial setting.
Key Responsibilities
Coolant Management:
Accurately mix, distribute, and replenish coolants, cutting fluids, and lubricants across multiple CNC machines according to specific operational parameters.
System Testing & Monitoring:
Perform daily chemical tests using refractometers and pH meters to monitor coolant concentration, alkalinity, and biological control.
Equipment Maintenance:
Execute routine cleaning of machine sumps, operate tramp oil skimmers, and maintain coolant recycling and filtration equipment to prevent fluid degradation.
PWHT Plant Integration:
Safely navigate and operate within heavy industrial environments, specifically alongside Post Weld Heat Treatment (PWHT) operations, ensuring all fluid management aligns with the plant's production and heat-treating schedules.
Troubleshooting:
Identify and resolve fluid-related issues such as foaming, foul odors, rust, or poor tool life, adjusting chemical dosing as necessary.
Inventory Control:
Track the consumption of chemical inventory, manage stock levels of raw coolant fluids, and initiate purchase requests to prevent shortages.
HSE Compliance:
Strictly adhere to all Health, Safety, and Environmental (HSE) protocols regarding the handling, storage, and disposal of hazardous chemicals and waste fluids. Maintain accurate logs and Material Safety Data Sheets (MSDS).
Requirements
Education:
High School Diploma, Technical Diploma, or equivalent certification in mechanical maintenance, machining, or industrial chemistry.
Core Experience:
Minimum of 5 years of hands-on experience in CNC machine maintenance, specifically focused on fluid and coolant management.
Industry Experience (Mandatory):
Proven work history within heavy manufacturing, Oil & Gas, or large-scale industrial plants. Specific experience working in or around
PWHT (Post Weld Heat Treatment) plants
is strictly required.
Technical Skills:
* Proficiency in using fluid testing equipment (e.g., refractometers, titration kits).
Strong understanding of coolant chemistry, mixing ratios, and bacterial control.
Familiarity with CNC sump cleaning operations and industrial pumping equipment.
HSE Knowledge:
Solid understanding of industrial safety standards (e.g., OSHA, local regulations) and safe chemical handling/disposal procedures.
Soft Skills:
Excellent physical stamina, strong attention to detail, and the ability to work effectively both independently and alongside machining operators.
Location: Zakarpattia
Workplace: onsite
Ajax Systems —
міжнародна технологічна компанія і найбільший у Європі виробник систем безпеки. Продуктам Ajax довіряють уже понад 4,5 мільйони кінцевих користувачів і 330 тисяч PRO-користувачів у більш ніж 180 країнах. Компанія пропонує комплексні рішення для захисту житлових і комерційних об'єктів різного масштабу. Нині портфоліо Ajax налічує 280 дротових і бездротових пристроїв для захисту від вторгнення, а також відеоспостереження, пожежної безпеки та комфорту й автоматизації.
Наша компанія — українська історія успіху і місце неймовірної сили та енергії.
Процес виробництва забезпечують п’ять департаментів: SMT-монтажу, монтажу, напівфабрикату, тестувань та готового продукту. А також експериментально-технологічний відділ та відділ контролю якості. На виробництві встановлено сучасні SMT та конвеєрні лінії, автоматизовано ключові процеси і постійно нарощуються потужності.
Ми прагнемо до повної відповідності європейським стандартам, тому забезпечуємо вам достойні умови праці, можливості розвитку та фінансову стабільність.
У зв’язку з активним розвитком компанії, ми шукаємо
Manufacturing Subject matter expert (SME)
на наше виробництво.
Обов’язки:
Організацію та підтримку виробничих процесів, контроль за продуктивністю;
Слідувати за виконанням стандатів виробництва та якості на рівні заводу;
Впровадження нових методологій на виробництві;
Організацію, стандартизацію та комплектацію робочих змін;
Впровадження дій по покращенню ключових метрик виробництва (FТТ, брак, продуктивність, простої, виконання плану, відвантаження готової продукції)
Розвиток персоналу — навчання керівників змін, організація зовнішніш навчань;
Заощадження людських ресурсів через принципи
Lean
(бережливе виробництво);
Моніторинг, контроль та зменшення витрат по розхідним матеріалам;
Стандартизація виробничих процесів, які відповідають політиці компанії на всіх локаціях корпорації;
Вимоги:
Досвід управління виробництвом на керівних посадах від 1го року;
Досвід в управлінні процесами відбраковки, тестування, ремонту на виробництві конвеєрного типу;
Вміти підтримувати високі стандарти на виробництві, слідувати принципам бережливого виробництва та використання основних інструментів;
Розуміти планування та розрахунків навантаженості виробничих потужностей;
Готовність до відряджень;
Вміти збирати та опрацьовувати інформацію;
Мати креативне та критичне мислення;
Вміти працювати в Google Documen для статистики і аналізу даних та 1С;
Англ. мова — середня або вище середнього (бажано);
Що ми пропонуємо:
Можливість бути частиною глобального проєкту;
Культура швидкого зворотнього звʼязку;
Конкурентна заробітна плата;
Офіційне працевлаштування;
Курси з вивчення англійської мови;
Медичне страхування;
Якщо ти готовий приєднатися до нашої команди, надсилай нам своє резюме!
Location: West Union, IA
2nd Shift
COMPANY PROFILE:
CaptiveAire is the nation's leading manufacturer of commercial kitchen ventilation systems, and now provides a complete solution of fans, heaters, duct work, and HVAC equipment. For over 40 years, we've led the industry with innovative technologies, unmatched service, competitive pricing, and rapid lead times.
CaptiveAire maintains a network of over 90 sales offices in the U.S. and Canada and six strategically located manufacturing plants in North Carolina, Iowa, Oklahoma, California, Pennsylvania, and Florida.
We are currently hiring Manufacturing & Production Technicians to perform general assembly in our West Union, IA manufacturing facility. Join us if you are interested in working in a fast paced, financially sound, climate controlled manufacturing environment.
SCHEDULE:
2nd Shift 2:30pm-11pm Monday -Friday (Shift Premium Paid for 2nd Shift)
Occasional mandatory overtime
WHAT WE ARE LOOKING FOR:
Hard-working individuals, wanting to excel in their profession
Strong organizational skills
Self-starting team player with a positive attitude and good communication
Considers attendance & punctuality a priority
RESPONSIBILITIES:
Perform work according to safety & quality standards and procedures
Work effectively as a team member contributing to a positive workplace
Finished work is expected to be neat, orderly, and repeatable
Ensuring work space is clean, safe and in working order
JOB REQUIREMENTS
:
Ability to use various hand and power tools
Ability to lift up to 50 lbs independently
Stand for long periods of time
Basic mathematical skills
Proficient in English
Safety-sensitive position
Note: Satisfactory background check, and negative drug screen required
EDUCATION
:
High school diploma or equivalent required
SALARY:
Competitive Wages based on experience
Monthly bonus based on performance and productivity
BENEFITS
:
Medical, Dental, Vision
$100,000 Life Insurance & Long-Term Disability with Medical election
Flexible Spending Account (FSA)
401k w/ employer match
Paid holidays
Vacation and sick days based upon tenure
APPLY NOW!
Apply on our website:
captiveaire.com
OR pick up application at: 101 N Industrial Pkwy, West Union, IA 52175
Applications submitted for this position are valid for
60
days. Consideration for employment after
60
days requires a new application to be submitted.
Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law.
#P1
Location: United States- Bellwood, Illinois
Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.
Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor.
Principal Duties/Responsibilities:
· Performs expert level break-fix & preventive maintenance, and/or design of mechanical, and electrical equipment improvements as well as complex systems as the employee’s job specialty requires. Provides troubleshooting support on equipment and technical support on production lines as appropriate for the employee’s job specialty. Maintains in-depth technical knowledge of numerous systems as the employee’s job specialty requires. Performs research and procedures as the employee’s job specialty requires.
· Programs, troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems.
· Utilizes predictive equipment and interprets results for analysis, equipment condition assessment, troubleshooting and proactive maintenance. Including but not limited to infrared thermography, ultrasonic testing, power quality analysis, laser interferometry, ball bar, and vibration analysis.
· Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology.
· Identifies and sources parts, supplies and repair items as necessary. Suggests alternative items and engineered solutions to improve reliability.
· Independently performs maintenance as per industry standards.
· Complies with 5S and housekeeping standards.
· May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks.
· Studies and investigates technical and systems methods, tools, and innovations that can be implemented in ATS sites to improve maintenance practices and updates documentation.
· Prepares input for cost analysis for new equipment, repair/rebuild proposals, cost savings and innovations as required.
· Updates records and reviews CMMS history and analyzes data.
· Provides technical contents of sales quotations and performs T&M duties as required.
· Trains and coaches less proficient technician. Assumes project manager responsibilities as assigned.
· Completes and conducts on-the-job training and technical self-study programs for career development.
· Follows all safety related policies, rules, regulations, technical instructions and guidelines.
Situational awareness and identify unsafe behaviors and conditions.
Knowledge, Skills, Abilities, & Behaviors Required:
· High School Graduate or equivalent (GED).
· Associates degree with a Technical focus and 7 years of related experience in specific industry; or, 10 years of experience in specific industry.
· Proficiency in predictive technologies including vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment.
· Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs.
· Must be able to use hand tools and specialized tools as appropriate.
· May be required to travel.
· Six Sigma experience desired.
Physical Demands and Working Conditions:
While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.
ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.
Pay Range
$102,970
—
$131,689.52 USD
ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy
here.
ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí
here.
Location: Valencia
Workplace: OnSite
ROLE HIGHLIGHTS:
- Configuration Manager
- Location: Valencia, Spain
- Department: Manufacturing Assurance; Global Manufacturing Organisation
- Reports to: Configuration and Change Team Lead
- Employment type: Permanent
- Workplace model: Hybrid
- Employment is subject to applicable security screening (incl. SUPO, where required)
WHY THIS ROLE MATTERS:
We are looking for a highly skilled Configuration Manager to join our Configuration Management and Change Control team within the Global Manufacturing Organization (GMO). In this role, you will play a crucial part in executing our CM functions across multi-domain environments and ensuring flawless product data integrity for multi-site manufacturing.
As a Configuration Manager, your mission is to actively bridge engineering and manufacturing by capturing product information, structuring it effectively, and managing changes throughout the product lifecycle for the local production site. Reporting to the global CM Team, you will act as a subject matter expert, driving configuration consistency and ensuring changes are rigorously controlled and documented within the local site.
WHO WE ARE
ICEYE is the world leader in sovereign intelligence from space. We deliver persistent monitoring capabilities to detect and respond to changes in any location on Earth.
ICEYE owns the world's largest and most advanced SAR (synthetic aperture radar) satellite constellation. To our customers we provide intelligence with unmatched quality, latency and revisit times, in any weather, day or night. To governments who choose to operate their own constellation we provide this proven capability as a sovereign system.
ICEYE-built constellations serve customers in defence and intelligence, environmental monitoring, insurance and emergency management. We enable fast decisions that contribute to a safer future.
Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East, and Asia-Pacific.
YOUR DAY-TO-DAY RESPONSIBILITIES
- Execute and support the continuous improvement of the Configuration Management Standard Operating Procedures (CM SOPs).
- Establish and manage product baselines for assigned segments, ensuring absolute data consistency across PLM, ERP and MES systems.
- Independently manage the day-to-day change management process for assigned projects; process ECRs, ECOs, RFDs, and RFWs, and actively participate in or facilitate Change Control Boards (CCB).
- Structure and maintain EBOM/MBOM as well as CIDL/ABCL configurations, ensuring seamless transitions and accurate product breakdowns.
- Apply and enforce item classification schemes, part numbering conventions, and product breakdown structures across hardware and software.
- Ensure that all relevant personnel at the site are trained on CM processes, workflows, and system usage, and maintain awareness of updates or changes to established procedures.
- Act as an ambassador for the PLM and MES platforms, proactively guiding cross-functional teams on CM best practices and effective system utilization to drive adoption, streamline workflows, and protect data integrity.
- Collaborate closely with program managers, engineers, supply chain, and quality assurance to resolve configuration issues and maintain integrity.
- Track and compile CM metrics, KPIs, and configuration status reports for your assigned projects, identifying risks and proposing solutions.
- Adapt CM practices to suit a rapid-paced environment, balancing prototype cycles, design iterations, and multi-program concurrency.
WHAT WE’RE LOOKING FOR
MUST HAVES:
- Engineering background (Bachelor’s in electrical, electronics, mechanical, aerospace, or a relevant engineering discipline).
- 4 to 6 years of experience in configuration management or a closely related engineering discipline within the aerospace, defense, or automotive industry.
- Working knowledge of configuration management standards (e.g., ECSS-M-ST-40, EIA-649, or MIL-STD-973).
- Experience with hardware and/or software configuration management within a multi-domain product environment.
- Demonstrated experience processing change documentation and actively contributing to a CCB.
- Strong understanding of the distinction between EBOM and MBOM, product breakdown structures, and item classification methodologies.
- Hands-on experience with at least one PLM system (e.g., Arena, Windchill, Teamcenter, Enovia, Aras) and familiarity with an MES or ERP system.
- Ability to work independently and collaboratively in a fast-paced environment where processes are still maturing.
- Fluent in English. Spanish is a plus.
NICE TO HAVES:
- Familiarity with ground segment or mission operations system architectures.
- Exposure to software CM concepts (version control, branching strategies, CI/CD pipelines).
- Demonstrated experience in programming and AI tools for creating automations, tools and for day-to-day use
- Experience assisting in the implementation or testing of PLM/MES system updates.
- Certification or coursework in CM (e.g., CM2, CMIPC, NDIA CM training).
- Experience in a manufacturing scale-up or transition environment.
APPLICATION PROCESS
- Talent Screening
- Hiring Manager Interview
- Assessment and Presentation
- Final Interview
WORKING AT ICEYE
At ICEYE, you’ll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing, and success are a priority, with continuous professional development, training opportunities, and a culture where collaboration is how we win.
HOW WE WORK (OUR VALUES)
Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism, and ownership when things get hard, and we keep moving until we find a way.
- Be curious: Go deep, ask questions, listen carefully, and think critically. Understand the “why” behind decisions.
- See the big picture: Stay close to what’s happening across the company so you can make better decisions. Consider how your work affects others.
- Drive effective teamwork: Create psychological safety, invite different perspectives, and build inclusive teams. There are no bad questions.
- Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift.
- Have fun: What we do matters—and it should be enjoyable. Celebrate progress, take pride in results, and share the wins.
BENEFITS
Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process.
Base salary range for this position is dependent on experience, and will be negotiated individually.
OUR COMMITMENT TO DIVERSITY, EQUITY, AND INCLUSION
We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected, and able to speak up. Whatever your background, we want you to bring your authentic self to the table.
We’re committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us—we’ll do our best to help.
Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.
ОфисheadPoland; Stuttgart
ОфисheadZakarpattia; Kyiv
Не хотите искать каждый день?
Настройте подбор один раз, и подходящие вакансии будут сами приходить в Telegram.
Настройте подбор, и подходящие вакансии будут приходить в Telegram.
Автоотклики