Вакансии

Location: Abu Dhabi, United Arab Emirates We are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivaled expertise, equipment, and technology that supports the entire asset life cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline, subsea, process, and valves – all designed to help you optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions.  This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organization. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities. The Role? The Workshop Supervisor is responsible for supervising the day-to-day workshop activities, focusing on the refurbishment, repair, and maintenance of mechanical, electrical or hydraulic components for heavy equipment. This role involves hands-on supervision, team coordination, and ensuring all work is completed to high standards of safety, quality, and efficiency. The ideal candidate will have strong technical expertise, excellent leadership skills, and a commitment to delivering results in a fast-paced environment. Main Responsibilities & Key Result Areas Workshop Supervision: Plan, schedule and supervise all workshop operations, including dismantling, inspection, refurbishment, and reassembly of crane components/assemblies. Assign tasks to workshop technicians and monitor their performance to ensure deadlines are met. Conduct daily toolbox talks and ensure all personnel understand job hazards and controls Conduct quality checks at various stages of the refurbishment process. Monitor workshop housekeeping, ensuring compliance with 5S and EnerMech standards. Technical Leadership: Provide guidance to technicians on mechanical repairs, hydraulic systems, and structural component refurbishments. Instruct senior technicians and supervisors to provide support. Review and interpret technical drawings, repair manuals, and industry standards to guide the team effectively. Identify and troubleshoot technical issues, ensuring timely resolutions. Ensure all work is performed according to OEM specifications, API/ISO standards, and client requirements. Conduct QC checks, approve inspection reports, and final acceptance documentation. Safety, Compliance & Risk Management Enforce HSE policies, PTW requirements, and safe work practices. Conduct risk assessments and ensure mitigation measures are implemented. Stop unsafe work and intervene immediately when hazards are identified. Role out safety alerts and lessons learnt from previous scopes to reduce rework and raise awareness. Resource and Inventory Management: Responsible to manage workshop tools, equipment, and consumables, ensuring availability and proper maintenance. Support workshop store man to track inventory levels and coordinate with line manager for procurement of required materials and spare parts. Support workshop store man with maintaining accurate records of tools and equipment usage. Team Coordination: Delegate supervision to workshop supervisors or senior technicians in support of development. Train and mentor workshop technicians, ensuring they are skilled and knowledgeable in refurbishment processes. Promote teamwork and a culture of continuous improvement. Monitor and report individual and team performance to line manager. Motivate staff to maintain high levels of productivity and morale. Documentation and Reporting: Maintain detailed records of work completed, including inspection reports, job cards, and quality control checklists to support engineers' work. Provide regular updates on project progress and highlight any issues or delays. Ensure accurate documentation of repairs and ensure compliance with client and industry standards. Participate in client audits, technical meetings, and workshop inspections. Requirements Essential: Education: Diploma or certification in Mechanical Engineering, Industrial Maintenance, or a related field. Experience: 5+ years of hands-on experience in mechanical maintenance and repair, with at least 2 years in a supervisory role. Strong knowledge of offshore pedestal cranes, including hydraulic systems, winches, and structural components. Certifications: Relevant technical or trade certifications (e.g., crane maintenance, hydraulics, or welding) are an advantage. Behaviors and Personal Qualities: Essential: Excellent technical troubleshooting and problem-solving skills. Strong leadership and team management abilities. Ability to interpret technical drawings, schematics, and industry standards. Proficiency in using workshop tools and diagnostic equipment. Strong understanding of HSE practices in the oil and gas sector. Effective communication and interpersonal skills. Strong problem-solving and decision-making abilities. Work Environment: Workshop-based role with potential travel to offshore locations for inspections or project support. Requires physical fitness to work in a demanding environment, including lifting, standing for extended periods, and working with heavy equipment. Must be flexible to work extended hours during peak project periods. Based in a workshop environment with occasional site visits to offshore platforms as needed. Must be flexible to work extended hours and manage on-call responsibilities during critical projects.

Location: Aberdeen, United Kingdom We Are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we've been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle - offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves - all designed to help our clients optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions. This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. The Role and Responsibilities A new permanent opportunity has arisen for a Contract Support Engineer to work within Lifting Solutions Business Line. This role will be onshore based and you will be tasked with managing a Cranes and Lifting client contract, ensuring all aspects of this contract are delivered from a quality, timescale, health and safety and maintenance point of view. Other duties and responsibilities will include; Responsible for the delivery of the Contracted Services to the Client including Safety, Quality, Core Personnel and equipment provision, Maintenance and Project Delivery Deliver all aspects of client account, including but not limited to: Sales enquiries, mobilisations, demobilisations, aged debt, equipment requirements, client meetings, planning & coordination, technical support Responsible for delivering plans in place to support client Integrated Asset Plan and EnerMech support capability Act as the Clients representative in ensuring any wider EnerMech departments deliver as per commitments Minimise any maintenance backlog and ensure that any Safety Critical Maintenance backlog is immediately identified to the Client and internally to the EnerMech responsible person, where applicable in business line Provide first line technical support and coordinate any client requirements including breakdowns Manage the maintenance feedback loop to FMEA The Requirements To be successful for this position you will have previous experience in a similar role and a good technical knowledge of cranes. You may have come from a Project Engineer or an Account Management background, acting as a client representative/account manager is a key part of this role. Holding a mechanical engineering qualification is preferred. Communicating clear standards for performance is key and encouraging employee involvement in QHSE. You will have a proven track record of client interfacing and have a high emphasis on customer service. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities.

Location: Mumbai, India We Are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we've been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves all designed to help our clients optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions. This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. The Role and Responsibilities Job Purpose: To manage and coordinate the complete lifecycle of assets and procurement processes within the Shared Services Centre, ensure accurate data management, compliance, and operational efficiency. The role focuses on maintaining asset master data, facilitating end-to-end P2P workflows, and supporting cross-functional collaboration for timely and cost-effective outcomes. Responsibilities: Asset Management: Manage asset master data in NAV by creating/updating item cards, asset numbers, and maintaining essential records for mobilization, status, and allocation across global entities and jobs Ensure timely and accurate updates of resource status and inventory; maintain standardized databases for all asset-related documents Facilitate end-to-end asset lifecycle tracking, including Load Out Lists, rental and third-party asset updates and coordination with regional teams Create, manage, and track Purchase Quotations (PQs) for hire and purchase of assets in Microsoft Dynamics NAV 2009 R2, ensuring full traceability from initiation to execution Validate and update asset certificates in NAV, maintain job certification folders and registers, and ensure standardized document naming for maintenance records Prepare and deliver weekly, fortnightly, monthly, and ad hoc reports Procurement: Ensure timely PQ creation, PO conversion, GRN posting, and necessary amendments Follow up on open POs and Unposted Invoices to resolve discrepancies with AP team and requestors, thereby supporting accurate invoice processing and enabling timely payment by the finance team Coordinate with regional and SSC teams to optimize procurement processes, resolve discrepancies, and maintain consistency across global operations Maintain procurement records and prepare daily activity reports Initiate and monitor supplier follow-ups for compliance documents, update NAV records for expiry tracking, and ensure proper documentation for audits Prepare and deliver weekly, fortnightly, monthly, and ad hoc reports Create and maintain SOPs for any new processes or changes in Asset Management and Procurement workflows, supporting operational efficiency and aligning with global standards and best practices You Are Anticipated Skills Data-driven, detail-oriented, with good organizational capabilities Strong analytical, problem-solving, decision-making, and critical thinking abilities, essential for asset lifecycle and procurement coordination Communication and stakeholder management, effectively liaising with finance, operations, logistics Comfortable under high-pressure and deadline-driven environments, with good adaptability and flexibility, and willingness to extend working hours when operational needs demand Experience Bachelor's degree in any stream with 2-3 years of relevant experience Ability to effectively use Microsoft Word, Excel, Outlook, and PDF applications for reporting and documentation Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities. You will have good organisational and time management skills with the ability to meet deadlines, along with effective communication skills.

Location: Kuala Lumpur, Malaysia We Are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we've been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves all designed to help our clients optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions. This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. The Role and Responsibilities Overview: To deliver efficiently and on time specifically assigned projects to stakeholders as directed whilst maximising the potential for EnerMech. To control the assigned projects in terms of deliverables and budgets. Responsible for project engineering tasks, from initial kick-off to final account. Perform multi-discipline coordination of engineering and all other functions necessary for project delivery. Office-based duties will also include direct control of all operational and financial management activities to ensure effective project completion, project status reporting and project close-out documentation. Responsible for maintaining schedules for relevant project resources. Proactively identify and communicate risks to project schedules, deliverables and costs. Site-based duties will include being client representative with responsibility for all aspects of work scope implementation in accordance with client and company procedures. Main Responsibilities and Activities: Responsible for the delivery of work scopes, from initial enquiry to final account. Both working alone and contributing to multi-discipline project teams for the purpose of delivering our clients projects including management of and communication with 3rd party suppliers, sub-contractors and EnerMech service departments. Performing onshore and offshore site surveys as necessary to acquire input data. Performing and, where appropriate, leading site work scopes as EnerMech responsible project engineer. Responsible for the collation of project-related documents, such as but not limited to job tenders / costings, project plans, work schedules, work scope implementation methodologies, close-out and certification documentation. Accountable for the accurate completion of purchase requisitions. Responsible for progress chasing where required. Plan, provide for and deliver pre-job briefs and de-briefs for assigned activities. Responsible for ensuring materials, personnel and equipment are fit for purpose, available and dispatched in a timely manner for assigned activities. Responsible for the management, including tracking, control and progress reporting, of all costs associated with assigned activities or work scopes. Control of and issue of documentation to company and client standards. Responsible for drafting and issuing project change documentation capturing scope growth and/or variations. Identify and communicate risks to the project and manage them appropriately. You Are Recognised Qualifications and Experience: Essential: Higher National Diploma in a recognised and relevant engineering discipline or equivalent with a willingness to develop further education. Preferred: Engineering degree or similar qualification with appropriate experience. Project management qualification. Behaviours and Personal Qualities: Essential: Understands and interprets relevant standards, performs most tasks and requires minimal supervision. Engages team support in making complex decisions (solving complex problems). Interprets procedures within context of the situation and recognises when consultation is required. Recognises and acts upon opportunities within own area of responsibility. Conducts self in a professional manner to minimise conflict. Preferred: Encourages the participation and contribution of other team members. Continually extends range and depth of own skills and knowledge. Questions and confirms understanding of how own work activities support and align with HSE targets and business goals. Looks outside the immediate working environment for ideas. Manages personal time and deals effectively with conflicting demands and priorities. Demonstrates a calm and systematic approach. Understands the role of the "team" and how to contribute to the overall success of the Business Unit. Understands the role of own department and its relationships within EnerMech. Shows sensitivity and good interpersonal understanding. Can see things from the other persons perspective. Offers advice and encouragement to others in support of the best results. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities. You will have good organisational and time management skills with the ability to meet deadlines, along with effective communication skills.

Location: Aberdeen, United Kingdom We are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we've been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle - offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves - all designed to help our clients optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions. This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. The role? At EnerMech in Aberdeen we have a new role for a Workshop Technician to join our Equipment Rental department. This is a permanent role to be based in the Tooling Workshop and will include 37.5 hours a week with opportunity for overtime. Duties and Responsibilities will include; Inspect, test, and maintain mechanical and hydraulic tools to ensure they are safe and fit for purpose Perform routine checks on equipment before dispatch and after return Assemble, configure, and calibrate tools according to job specifications and client requirements Identify faults or wear and carry out repairs or refurbishments to restore tools to operational condition Replace damaged or worn-out parts using precision tools and manufacturer guidelines Provide support for mobilisation/demobilisation of tooling equipment You are? To be successful for this role you will have previous experience working within a workshop environment and will ideally have worked within an Oil & Gas Service company and be familiar with mechanical based equipment and tools. Candidates from other industries such as the Automotive/Car industry may be considered should they have sufficient experience. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities. Company benefits Generous holiday entitlement Pension scheme Private health cover Various staff discount schemes Employee referral scheme

Location: Henderson, Australia We are? A leading specialist engineering services company delivering integrated solutions for complex energy, infrastructure projects and operating assets. Our business is built on the belief that our people are what make EnerMech excellent, when we are thriving globally it’s not just about investing in our infrastructure, service offering and technology, but by also investing in our people. The Opportunity: We are currently seeking a Project Administrator to join our team, providing essential administrative and project support across multiple sites, including local, interstate, and offshore operations. This is an exciting opportunity for someone who thrives in a fast-paced, dynamic environment and enjoys variety in their day-to-day responsibilities. Responsibilities Support multiple project teams across WA, NT, and offshore Manage timesheet ensuring timely submissions Assist with QHSE documentation and compliance Maintain documentation including pre-starts, management files, client records, and travel docs Procurement Support – manage supplier invoice, raising POs and receipts Booking flights and accommodation Requirements The ideal person will: Proven experience in a project or site administration role (ideally within the energy, engineering, or construction sectors) Strong time management, attention to detail and multitasking skills Proficient with Microsoft Office (Navision experience a bonus) Excellent communication skills with the ability to liaise across various teams Able to adapt to changing project needs and work independently or as part of a team If you're looking for a role where no two days are the same and you can be part of a supportive, high-performing team—this is the opportunity for you. Benefits Join Our Team: If you are passionate about making a difference in safety and quality within the energy and infrastructure sectors, and if you are driven to lead by example, we invite you to join our team at EnerMech. This role offers an opportunity to contribute to the core values of our company and to champion a safety-first approach that ensures the well-being of our workforce and the communities we serve. EnerMech is committed to offering a remuneration package that reflects the value and expertise brought by the successful candidate. Why EnerMech? When you join EnerMech, you're joining a company that values expertise, encourages innovation, and supports its people. You’ll be part of a collaborative team that’s focused on delivering results – safely, efficiently, and with integrity. Ready to energize your career? Apply now and be part of something bigger. EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities.

Location: Brisbane, Australia Who We Are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves – all designed to help our clients optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions.  This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. About the Role Are you mechanically minded, quality focused, and looking for a hands-on role within a growing industrial services business? We are seeking a Hose Management Technician to join our Brisbane team in a permanent full-time capacity. This role will be primarily supporting the Ampol Oil Refinery in Lytton, playing a key role in the planning, execution and safety of the Hose Integrity Management program on-site. Reporting to the Hose Management Team, you will play an integral role in ensuring the safe manufacture, inspection, testing, and delivery of hose assemblies while providing exceptional customer support and technical expertise. Key responsibilities include: Receiving, inspecting, and managing incoming and outgoing hose assemblies. Conducting QA/QC activities associated with hose manufacture, delivery, and dispatch. Manufacturing hose assemblies in accordance with company procedures and relevant industry standards. Assisting with hose pressure testing and certification activities. Coordinating hose deliveries and logistics to customer sites. Carrying out hose inspection, maintenance, and management activities at client locations. Building and maintaining strong relationships with customer representatives and hose focal points. Providing technical assistance regarding hose specifications, applications, and maintenance requirements. Conducting inspections of used hose assemblies and preparing detailed condition reports for customers and internal stakeholders. Maintaining a safe, organised, and efficient workshop environment. Requirements About You To be successful in this role, you will ideally possess: Minimum 2+ years experience in a mechanical, hydraulic, hose, industrial services, maintenance, or workshop environment. Strong mechanical aptitude and attention to detail. Experience with quality assurance and inspection processes. The ability to read and follow technical procedures and industry standards. Strong customer service and relationship-building skills. Confidence in using Microsoft Outlook and Excel. Good organisational and time management abilities. A current driver's licence. Full Australian Working Rights A proactive attitude and commitment to workplace safety. Desirable Experience in hose assembly, hydraulic systems, fluid transfer equipment, or asset integrity services. Exposure to industrial, mining, oil & gas, manufacturing, marine, or bulk fluids industries. Forklift licence. Pressure testing or inspection experience. Benefits What We Offer Permanent full-time employment. Brisbane workshop-based role with occasional site travel. Competitive salary package. Ongoing training and career development opportunities. Supportive team environment. Opportunity to work with industry-leading hose management and maintenance solutions. A strong safety-focused culture. Apply Now If you are looking for a rewarding hands-on role where you can develop your technical skills and work closely with valued customers, we'd love to hear from you. Submit your application today and become part of a team committed to quality, safety, and exceptional customer service.

Location: Gladstone, Australia We are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves – all designed to help our clients optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions.  This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. EnerMech currently requires Mechanical Fitters for upcoming shutdown and maintenance projects across the Gladstone region. We have immediate start dates available. This opportunity is suited to trade-qualified Mechanical Fitters with experience in site-based maintenance, shutdowns, breakdowns, installation, and repair work across heavy industrial environments. About the Role As a Mechanical Fitter, you will support site teams with planned and reactive mechanical maintenance activities, helping ensure work is completed safely, efficiently, and to a high standard across shutdowns, maintenance projects, and industrial work fronts. Key responsibilities include: Carrying out mechanical fitting, installation, maintenance, repair, and overhaul activities Supporting shutdowns, planned maintenance, breakdowns, and project scopes across industrial sites Inspecting, servicing, aligning, assembling, and replacing mechanical components and equipment Assisting with pumps, valves, conveyors, fixed plant, rotating equipment, pipework, and associated systems Reading and interpreting drawings, work packs, procedures, and technical documentation Completing work safely in line with permits, risk assessments, job plans, and site requirements Working collaboratively with supervisors, leading hands, trades, and project teams Maintaining a strong focus on safety, quality, housekeeping, and efficient task completion Requirements What We're Looking For Australian recognised trade qualification in Mechanical Fitting, Fitter and Turner, or equivalent Demonstrated experience as a Mechanical Fitter within shutdowns, maintenance, turnarounds, breakdowns, or project work Experience working within LNG, oil and gas, mining, resources, power generation, alumina, refinery, or heavy industrial environments Strong fault-finding, mechanical maintenance, installation, and repair capability Ability to work safely and effectively in fast-paced site environments Strong communication skills and the ability to work well as part of a team Commitment to Health, Safety, Environment, and Quality standards Current Driver’s Licence Relevant site inductions, Construction White Card, working at heights, confined space, EWP, gas testing, and first aid tickets highly regarded RTAY inducted is highly regarded 3 Site medical clearance preferred Recent Police Clearance Full Australian Working Rights Benefits Why Join EnerMech? Competitive remuneration and future project opportunities Work with a leading global provider of integrated industrial services Opportunity to support major Gladstone-based projects and shutdowns Strong safety culture and professional development pathways Diverse and challenging work environments Register Your Interest Today Whether you’re currently available or considering your next opportunity, we’d like to hear from experienced Mechanical Fitters interested in upcoming shutdowns, maintenance projects, and industrial work across Gladstone and the surrounding Queensland region. Join a team committed to delivering safe, efficient, and innovative solutions for some of Australia's most significant industrial operations. Apply now and express your interest in upcoming Mechanical Fitter opportunities with EnerMech.

Location: Abu Dhabi, United Arab Emirates We are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivaled expertise, equipment, and technology that supports the entire asset life cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline, subsea, process, and valves – all designed to help you optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions.  This approach reduces risk and enhances efficiencies, making us a leading and trusted partner every step of the way. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organization. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities. The Role? The primary responsibility is to support the deck & lifting operations on the client platform as per company processes and procedures and demonstrate safety leadership and continuous development in all aspects of crane, lifting, and support service activities. Main Responsibilities & Key Result Areas Lifting AP shall perform and be responsible for the following: - Is designated to prepare lift plan & procedure as per client & company standard. Is designated as being in charge of planning, coordinating, controlling and executing the lift. Be responsible for coordinating CONTRACTOR's Riggers to conduct all vessel lifts and those on the platform as directed by Crane Supervisor or COMPANY personnel Ensures that people involved are competent for performing their task, aware of the task and procedures to be followed, and aware of their responsibilities. Briefs people involved in or affected by the lift. Ensure all necessary test certificates and other documents are available Shall be responsible for the management of client / COMPANY- owned and supplied loose lifting equipment. Be fully trained and conversant with loose lifting equipment rigging loft management procedures i.e. maintain a lifting equipment data base & issuance register consisting of the following; I. Inventory of equipment. II. Test certificate. III. Damage loss report register Booking in & out sheets detailing the name of person using equipment, date of issue, description etc. In line with clients / COMPANY's Bi-annual lifting equipment campaign assist TPI with inspection & recertification of lifting equipment. Carry out Banking/Signalman duties as and when required. Ensures the lift is carried out following the plan. Suspends the lift if changes or conditions (eg, wind) occur that would cause a deviation from the plan. Plan and risk assess all routine and up to non-routine complicated crane-lifting operations associated with the day-to-day running of the client / COMPANY platforms. Supervise all lifting operation on client / COMPANY platforms, including non-routine complex lifts. once approved by Integrity Division. Selecting the correct crane and accessories for the specific task. Checks that load integrity and stability are satisfactory; Ensure all other statutory requirements and any necessary work permit are in place . Identify all hazards and restricted areas. Emergency Procedures in case of damage or impairment to the crane during operation, and for safe recovery of the crane to a holding location on the installation. Ensuring that the person directing crane movements (Signaller / Banksman) is readily identifiable to the crane operator by wearing high visibility clothing or distinguishing markings. Shall allow for concurrent or simultaneous operations that may affect or be affected by the lift, eg, helicopter operations, ballast control, other cranes. Checks that there is no deviation from standards for routine lifts. Ensuring that the workplace is provided with adequate lighting for night lifting. Complete reports, lifting operation risk assessments, logs and other documentation, as required. Ensure competent supervisor is available should the Appointed Person delegate his duties of part thereof to others Have sufficient general engineering knowledge of loose lifting equipment to carry out daily inspection routines. Ensures that the lifting equipment is maintained, examined and appropriate for use. Carry out platform emergency duties under the direction of nominated personnel. Be multi-skilled in other platform duties including operating of firefighting equipment and undertaking fire standby and deck duties, when required. The Appointed person can delegate his duties to competent personnel however the responsibility is still with the Appointed Person. The Appointed person has the authority to stop operations where danger is likely to arise if operations continue. Requirements Be at least 32 years of age and above. Have at least 3 years Diploma in Mechanical Engineering or equivalent. Knowledge of AutoCAD & MS Office are mandatory. Shall have ADNOC Training center approved certification. Have relevant oil & gas offshore and onshore lifting-related experience of not less than 10 years in the same area of application with 5 years in a similar position. Have adequate training and hands on professional experience and be competent to act as an Appointed Person for lifting equipment. Shall be able to write Lifting plans, and supervise and execute critical lifting in oil & gas companies. Have focus on HSE priorities and lead a team for Safe Lifting Practices across different locations of the organization. Familiar with international standard related to Lifting engineering practices with sufficient knowledge in interpretation and to bring excellence in Change management. Valid OGUK Medical Certificate, BOSIET & H2S. Preferred: Shall have LEEA-UK qualifications "Entry Exam" and 4 day Appointed Person (Supervisor) course by approved Company Training Company.

Location: Houston, United States We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline, subsea, process, and valves – all designed to help you optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions. This approach reduces risk and enhances efficiencies, making us a leading and trusted partner every step of the way. The Role We are looking for an experienced Hydraulic Technician to join our team, responsible for the fabrication, installation, testing and maintenance of stainless steel hydraulic and instrumentation tubing systems. The role requires hands-on experience with 316 stainless steel tubing from 1/4" through 2" OD , including the coning and threading of medium-pressure (MP) and high-pressure (HP) tubing. Key Responsibilities • Install, bend, route and secure stainless steel hydraulic and instrumentation tubing from 1/4" through 2" OD. • Measure, cut, deburr, clean and fabricate tubing assemblies using manual and hydraulic tube-bending equipment. • Cone and thread MP and HP stainless steel tubing using approved tooling and procedures. • Install compression fittings, MP/HP connections, valves, manifolds, clamps, supports and other hydraulic components. • Read and interpret hydraulic schematics, P&IDs, isometric and fabrication drawings. • Perform pressure testing, flushing and leak testing of hydraulic systems. • Troubleshoot and repair hydraulic tubing, fittings, valves and associated components. • Ensure correct tube routing, bend radii, fitting alignment, cleanliness and installation standards. • Complete relevant inspection, testing and work documentation. • Maintain high standards of safety and quality at all times and travel to customer, onshore and offshore locations as required. Essential • High school diploma, GED or equivalent. • Minimum 3 years' experience in hydraulic tubing installation or a similar industrial environment. • Demonstrable experience installing 316 stainless steel tubing from 1/4" through 2" OD . • Hands-on experience coning and threading medium- and high-pressure stainless steel tubing . • Knowledge of MP/HP tubing systems, pressure-rated fittings and hydraulic systems. • Experience with compression fitting systems such as Parker A-LOK, Swagelok, Hy-Lok, Autoclave Engineers, HIP or equivalent. • Ability to read hydraulic schematics, P&IDs and engineering drawings. • Strong mechanical, troubleshooting and problem-solving skills. • Valid driver's licence and willingness to travel as required. Desirable Experience within oil & gas, petrochemical, pipeline, offshore or industrial environments would be advantageous, along with experience in hydraulic flushing, hydrostatic testing, hydraulic control panels, manifolds and power units. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organization. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities.

Location: Shanghai, China; Tianjin, China; Qingdao, China; Nantong, China We are looking for a dynamic and results-driven Business Development Manager to lead our growth strategy in China. This role requires a strategic thinker with a passion for identifying new opportunities, fostering relationships, and driving revenue in a highly competitive market. Develop and execute comprehensive business development strategies aimed at increasing market share and revenue across China. Identify and cultivate relationships with key industry stakeholders, clients, and partners. Analyze market trends and competitive landscape to identify new business opportunities and areas for growth. Lead proposal development and presentation efforts to win new contracts and expand existing client relationships. Collaborate cross-functionally with operations, marketing, and technical teams to ensure alignment on business objectives and offerings. Track and report on business development performance metrics, establishing goals and benchmarks for success. Represent EnerMech at industry conferences, networking events, and other opportunities to promote our services and build brand awareness. Mentor and support the business development team, fostering a culture of high performance and collaboration. Requirements 10+ years of experience in business development or sales within the energy, industrial, or related sectors. Proven track record of successfully driving business growth in China, with a strong understanding of local markets. Exceptional communication, negotiation, and interpersonal skills with the ability to influence at all levels. Strong analytical skills and ability to interpret market data to make informed decisions. Experience with managing cross-cultural teams and stakeholders. Bachelor's degree in Business, Engineering, or related field; an MBA is a plus. Fluency in English and Mandarin or other regional languages is highly desirable.

Location: Casper, United States As a Nitrogen Pump Operator and Transport Driver at EnerMech, you will play a vital role in the safe and efficient operation and transportation of nitrogen for various industrial services. This position requires a strong understanding of fluid pumping systems, bulk transport operations, and strict adherence to safety and transportation regulations. You will operate and drive off-highway vehicles on plant and lease roads, ensuring all activities are carried out safely and in compliance with company and regulatory standards. The ideal candidate will have a minimum of 36 months (3 years) of relevant experience; however, additional training may be provided for individuals who demonstrate a strong work ethic, safety awareness, and a willingness to learn. A clean driving record and the necessary certificates are required for this position Responsibilities: Operate nitrogen pumping equipment and transport nitrogen safely to various job sites. Ensure compliance with all transportation, safety, and environmental regulations. Conduct thorough pre-trip and post-trip inspections of vehicles and equipment. Maintain accurate records of deliveries, operations, and service reports. Assist in hands on operations in the field when needed. Communicate effectively with team members and clients regarding job requirements, procedures, and safety measures. Participate in ongoing training and development to maintain and enhance technical skills. Requirements Hazmat Endorsements / Nitrogen Experience is a Plus+ Minimum of 3 years’ experience in nitrogen pumping operations or related industrial driving roles. Valid CDL Class A license (required). With endorsements Strong knowledge of DOT regulations, transportation laws, and safety protocols. Ability to work independently and collaboratively in a team environment. Excellent communication skills, reliability, and a self-motivated attitude.

Location: Henderson, Australia Who Are We? We are EnerMech , a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves – all designed to help our clients optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions.  This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. We are seeking a motivated and detail-oriented Junior Estimator to join our Perth team. This role is ideal for a recent graduate or early-career professional looking to develop their estimating, commercial, and analytical skills within a dynamic and supportive environment. About the Role As a Junior Estimator, you will support the preparation of cost estimates, tender pricing, benchmarking activities, and commercial analysis across a range of industrial services projects. Working alongside experienced Estimators and operational stakeholders, you'll gain exposure to estimating methodologies, project costing, risk assessment, and tender development processes. This is an excellent opportunity to build a long-term career pathway within a growing global business. Key Responsibilities Assist in the preparation of project estimates and tender pricing schedules. Obtain and evaluate supplier and subcontractor quotations. Maintain estimate workbooks, pricing models, and supporting documentation. Support the development and maintenance of benchmarking tools, cost libraries, and lessons learned databases. Analyse historical project performance and estimating data to identify trends and insights. Assist with estimate reviews, cost validation, and risk assessments. Support reporting, dashboard development, and continuous improvement initiatives. Collaborate with operational, commercial, and technical teams throughout the tendering process. Requirements About You To be successful in this role, you will have: A Degree or Diploma in Engineering, Commerce, Finance, Construction Management, Quantity Surveying, Mathematics, Data Analytics, or a related discipline. Strong numerical, analytical, and problem-solving capabilities. Intermediate to advanced Microsoft Excel skills. Excellent attention to detail and organisational skills. Strong communication and stakeholder engagement abilities. A proactive mindset with a genuine willingness to learn and develop. The ability to manage multiple tasks and meet deadlines in a fast-paced environment. Benefits Why Join EnerMech? Opportunity to learn from experienced estimating and commercial professionals. Structured career development with clear progression pathways. Exposure to major projects across the energy, resources, maintenance, and industrial sectors. Supportive and collaborative team culture. Global business with strong growth opportunities. Competitive remuneration and employee benefits. Ready to Build Your Career? If you're looking to kick-start your career in estimating and commercial analysis with a respected global organisation, we'd love to hear from you. Apply now and take the first step towards becoming an Estimator with EnerMech. Join Our Team: If you are passionate about making a difference in safety and quality within the energy and infrastructure sectors, and if you are driven to lead by example, we invite you to join our team at EnerMech. This role offers an opportunity to contribute to the core values of our company and to champion a safety-first approach that ensures the well-being of our workforce and the communities we serve. EnerMech is committed to offering a remuneration package that reflects the value and expertise brought by the successful candidate.

Location: Aberdeen, United Kingdom We are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves – all designed to help our clients optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions.  This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. The Role and Responsibilities At EnerMech in Aberdeen we have a new opportunity for a Senior Project Engineer to join our Lifting Solutions team. You will be responsible for helping to deliver projects efficiently and on time, controlling budgets and other deliverables. You may be responsible for multiple projects at different phases. Client site or offshore visits may be required. Other Responsibilities will include; To deliver efficiently and on time specifically assigned projects to stakeholders as directed whilst maximising the potential for EnerMech Liaison with clients from initial enquiry in order to formulate technical requirements and influencing our clients toward the best solution To control the assigned projects in terms of deliverables and budgets Control and co-ordinate all activities including technical, supply chain, project controls to meet client and EnerMech Project Management requirements to deliver the work within the required standards Support bids and tendering with input as required To maintain existing and to grow customer relationships Provide project reporting as required to clients and EnerMech management Control and communication of change to the project through company process, for example budgets, work scopes, delivery dates and any other risks The Requirements You will be someone that is experienced in running multidiscipline projects, can proactively identify and offer solutions to problems, strong time management, communication and organisational skills to maintain project schedules. Ideally you will have experience of working on cranes and lifting related projects but this is not essential. You should have a minimum of an HND in a relevant engineering discipline. An engineering degree and project management qualification are preferred but not essential. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities. Company benefits Generous holiday entitlement Pension scheme Private health cover Various staff discount schemes Employee referral scheme

Location: Aberdeen, United Kingdom We Are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we've been energising our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle - offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves - all designed to help our clients optimise performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customised integrated solutions. This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. The Role and Responsibilities EnerMech are looking to recruit a Project Engineer on a permanent basis to join our team in Aberdeen. The role will be to work in our Cranes and Lifting department and will include the following responsibilities; The delivery of engineering projects, from initial kick-off to final account Liaising with clients from initial enquiry in order to formulate technical requirements and maintaining consistent communication/reporting as required throughout the project Preparing cost, time and resourcing estimates for engineering projects and offshore maintenance scopes of work The organisation and implementation of predominantly mechanical and structural engineering solutions, including structural components and machinery as required for projects Organising equipment mobilisations The Requirements You will be experienced in running projects from cradle to grave, can proactively identify and offer solutions to problems, strong time management and organisational skills to maintain project schedules. Ideally you will have experience of working on cranes and lifting related projects. You should have a minimum of an HND in a relevant engineering discipline. An engineering degree and project management qualification are preferred but not essential. The role will be based in Aberdeen so candidates will be from the local or commutable areas. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities. Company benefits Generous holiday entitlement Pension scheme Private health cover Various staff discount schemes Employee referral scheme

Location: Georgetown, Guyana We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline, subsea, process, and valves – all designed to help you optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions.  This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. Role Overview The Engineering Graduate will support the delivery of engineering and operational activities across EnerMech projects, gaining hands-on experience in a fast-paced, global oil & gas and industrial services environment. The role is designed to develop technical capability, commercial awareness, and field readiness through structured rotations and on-the-job learning. As a Graduate Mechanical Engineer at EnerMech, you won’t just be watching from the sidelines. You’ll get hands-on exposure to real projects, equipment and operations, working alongside experienced engineers and technicians and building your career from day one. Get hands-on with real engineering – support the maintenance, inspection, testing and preparation of mechanical equipment used on live projects. Solve real-world problems – work alongside experienced engineers and technicians to troubleshoot mechanical challenges and find practical solutions. Experience life in the field – gain exposure to onshore and offshore operations and see how engineering solutions are delivered in real working environments. Be part of major projects – contribute to mobilisation plans, project schedules, resource planning and the preparation of equipment for deployment. Turn engineering theory into practice – work with drawings, specifications, calculations, technical documentation and client requirements. See projects from start to finish – gain exposure to the full project lifecycle, from initial planning and equipment preparation through to mobilisation, execution and close-out. Make safety part of how you engineer – contribute to risk assessments, safety planning and safe systems of work. Work across the business – collaborate with engineering, operations, project management, procurement and other teams to understand how successful projects come together. Build your commercial mindset – learn how engineering decisions connect to project costs, labour, materials, logistics and overall project performance. Learn from industry experts – work alongside experienced professionals, developing your technical knowledge, confidence and understanding of EnerMech’s equipment, services and technologies. Build the foundations of your career – develop a broad mix of technical, operational, project and commercial experience designed to prepare you for your next step within EnerMech. Development & Learning Participate in a structured graduate development programme Gain exposure across multiple service lines (e.g. cranes, lifting, hydraulics, or process services depending on business line) Receive mentorship from experienced engineers and operational leaders Build understanding of project lifecycle from bid through to execution and close-out Requirements Bachelor’s degree in Mechanical, Electrical, Civil, or related Engineering discipline 0–2 years’ experience (internships or placements advantageous) Strong analytical and problem-solving skills Good communication and interpersonal skills Willingness to travel and work in field environments when required Basic understanding of engineering principles and industry standards What We’re Looking For Ready to get stuck in – proactive, hands-on and keen to learn. An eye for detail – you care about doing things properly (and safely). Curious by nature – you want to understand how and why things work. A team player – comfortable working with different people to get things done. Adaptable – because in the real world, plans sometimes change. The right attitude – we don’t expect you to know everything. That’s what the graduate programme is for. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organization. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities.

Location: Henderson, Australia Who We Are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves – all designed to help our clients optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions.  This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. Nitrogen Process Technician – LNG Shutdown Western Australia | Sept – November 2026 | Major Shutdown Program EnerMech is seeking experienced Nitrogen Process Technicians with a strong background in Nitrogen Process operations, utilising Nitrogen Membrane Units, HP Air Compressors and Dryers to support a major shutdown in Western Australia. This is an exciting opportunity to join a high-performing team delivering critical maintenance and shutdown activities on a large-scale industrial project from Sept – November. About the Role As a Nitrogen Process Technician, you will be responsible for carrying out nitrogen purging operations during the LNG Plant shutdown, ensuring all work is performed safely, efficiently, and in accordance with project procedures and requirements. Key Responsibilities Setup, Operate and monitor Nitrogen Generation Units, HP Air Compressors, Dryers and associated equipment Completion of operational activities following procedure and direction of the Project Engineer and Supervisor. Assist in the generation of operational records in a clear and concise manner. Ensure quality, health, safety and environmental systems are implemented and adhered to. Participate in pre-starts and toolbox talks Support safe and efficient execution of nitrogen purging activities Requirements About You To be successful, you will ideally possess: Proven experience as a Nitrogen Process Technician, Process Technician, Operator, or similar role on shutdown, maintenance, or turnaround projects. Demonstrated experience working with Nitrogen Processes, particularly Nitrogen Membrane Units, HP Air Compressors and Dryers Strong understanding of industrial safety standards Current Australian Driver's Licence. Construction White Card Ability to pass Safer Together Medical Strong communication skills and the ability to work effectively within a team. High commitment to safety, quality and operational excellence. Benefits Why EnerMech? When you join EnerMech, you're joining a company that values expertise, encourages innovation, and supports its people. You’ll be part of a collaborative team that’s focused on delivering results – safely, efficiently, and with integrity. Ready to energize your career? Apply now and be part of something bigger. EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities.

Location: Gladstone, Australia Who We Are We are EnerMech , a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves – all designed to help our clients optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions. This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. Industrial Services Supervisor Gladstone, QLD | Full-Time Opportunity Join EnerMech and Lead the Delivery of Critical Industrial Services Projects We are currently seeking an experienced Industrial Services Supervisor to join our Gladstone team and play a key role in delivering safe, efficient and high-quality industrial services projects across a variety of client sites. This is a hands-on leadership role responsible for supervising Industrial Services crews undertaking high and ultra-high pressure water jetting, industrial cleaning, shutdown, maintenance and project activities. You will serve as the key interface between our workforce, clients and Project Management team while actively supporting operations in the field. Key Responsibilities Supervise and coordinate Industrial Services crews across multiple client sites. Lead high pressure water jetting and industrial cleaning activities in accordance with EnerMech procedures and client requirements. Plan daily work activities, allocate labour and equipment, and ensure work scopes are delivered safely and efficiently. Conduct pre-start meetings, toolbox talks, risk assessments and ensure compliance with permit systems and site safety requirements. Provide technical guidance, coaching and leadership to technicians. Monitor job progress, productivity, labour utilisation and equipment performance. Complete and review daily reports, timesheets and project documentation. Liaise directly with clients regarding work progress, scope changes and operational requirements. Identify opportunities for additional works and communicate these with Project Management. Promote a strong safety culture and mentor team members to maintain competencies and performance standards. Requirements About You To be successful in this role, you will bring strong industrial services experience, practical leadership skills and a commitment to delivering work safely and efficiently. Essential Requirements Demonstrated experience in High Pressure Water Jetting and Industrial Services operations. Previous supervisory, leading hand or crew leadership experience within a heavy industrial environment. Strong understanding of high pressure water jetting equipment, pumps, hoses, tooling and associated safe work practices. Proven ability to lead teams in permit-controlled industrial environments. Excellent communication and stakeholder management skills. Strong planning, organisational and problem-solving abilities. Current Driver's Licence. Ability to work shutdown rosters including 12-hour day and night shifts, weekends and varied work schedules when required. Qualifications & Tickets HPW 302 ticket - essential Construction White Card. First Aid/CPR (desirable). 3 Site RTY Medical Pass - desirable Confined Space, Working at Heights, Forklift and EWP tickets highly regarded. Additional industrial cleaning or vacuum loading competencies advantageous. Experience Ideally 5+ years' experience within Industrial Services and high-pressure water jetting operations. Minimum 2 years' experience in a Supervisor, Leading Hand or similar leadership role preferred. Industry Experience Highly Regarded Alumina and refining Mining and mineral processing Oil & Gas / LNG Petrochemical and chemical processing Power generation Heavy industrial maintenance, shutdowns and turnarounds Previous experience working across Gladstone industrial sites Benefits Why Join EnerMech? Company Vehicle provided Work with a respected industry leader. Diverse maintenance, shutdown and project opportunities. Supportive team culture focused on safety and operational excellence. Opportunity to develop your leadership career within a growing business. Be part of delivering critical services to major industrial clients across the Gladstone region. If you're a hands-on Industrial Services leader with strong high-pressure water jetting expertise and a passion for safety and team performance, we want to hear from you. Apply today and join the EnerMech team. Why EnerMech? When you join EnerMech, you're joining a company that values expertise, encourages innovation, and supports its people. You’ll be part of a collaborative team that’s focused on delivering results – safely, efficiently, and with integrity. Ready to energize your career? Apply now and be part of something bigger. EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities.