Вакансии

Location: Sainte-Anne-de-Bellevue, Canada Role overview: Our client is seeking a Spacecraft EMC Systems Engineer for its high performance spacecraft for our remote sensing and communications satellites. The Spacecraft EMC Systems Engineer will own the EMC concept, analysis, verification and mitigation for multiple satellite programmes, driving architecture decisions, leading cross disciplinary teams. He will ensure all electrical subsystem on the bus and payload, from requirements capture to hardware design, do not interfere with themselves or launch vehicles. The role works closely with platform and payload teams to ensure an electrically clean, reliable and launch ready spacecraft. Tasks summary: EMC Architecture Concept & Requirements • Capture, allocate and trace EMC functional, performance, and requirements. • Define the EMC architecture (shielding strategy, grounding scheme, antenna placement, mode control, and harness segregation requirements & routing constraints). EMC Analysis & Electrical Design • Perform EMC analyses of the whole spacecraft (accounting for the payload specifics) for radiated/conducted emission and susceptibility, antenna coupling, shielding effectiveness, fuse blowing…etc. and verify compliance early in the design cycle. • Recommend mitigation such as shielding, filtering, grounding schemes, layout rules. DC Power Distribution • Review DC power distribution architecture (primary bus, secondary bus lines, converters, fusing, protection) for EMC/EMI aspects. • Review conductors, termination, connectors and back shells (material, gauge, shielding…etc.) that satisfy EMI control requirements. Cross‑Functional Coordination, Stakeholder & Program Interaction • Communicate technical status, risk assessments and trade‑study results to senior management and/or customers or partners. • Support ICDs with payload and platform teams and suppliers. • Act as the EMC authority in System and subsystem design reviews • Liaise with RF, Power, Structures, Propulsion, Software and Ground Segment teams to resolve cross disciplinary EMC issues early. • Support B&P (Phase 0 & pre-Phase A). Integration & Verification (IVV) • Author the EMC Verification Master Plan covering component level, subsystem level and full spacecraft tests (CE/CS, RE/RS). • Oversee test facility set up, instrumentation calibration, test execution, data reduction and results certification. • Author test procedures, and acceptance criteria. • Lead CE/CS tests, RE/RS tests on hardware and review suppliers test results. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns and provide EMC training sessions. • Act as technical liaison with customers, partners and external vendors. • Act as Continuous Improvement stakeholder. • Contribute to our client’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Participate in Change Control Boards (CCB) and ensure impact analyses are performed for any electrical change. • Maintain GDIR and EDTS streamlining. • Ensure all artefacts, analysis and documentations are version controlled in PLM environment. • Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation. On‑Orbit & Operations Support • Support root‑cause investigations for on‑orbit anomalies; update design baselines and lessons‑learned. • Support SOOH development and associated operator training. Required Qualifications: • B.Sc. in Electrical Engineering, Aerospace or Physics, (M.Sc. preferred) with 10 + years of electrical design engineering experience on LEO/MEO/GEO missions. • Proficiency in spacecraft and unit EMC requirements and simulations. • Prior experience supervising a team of EMC engineers or leading multi disciplinary task forces. • Strong understanding of aerospace system engineering fundamentals • Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. • Experience with Confluence and JIRA. • Demonstrated capability to efficiently work with little to no supervision. • Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. • Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Sainte-Anne-de-Bellevue, Canada Role overview: Our client is seeking an experienced Electrical Power System Engineer to support the concept, detailed design, analysis, verification and integration of electrical power subsystems (solar arrays, power‑conditioning units, batteries, distribution & regulation) for our current and next‑generation remote sensing and communications satellites. The role works closely with payload, bus, thermal, structural and mission‑systems multidisciplinary teams responsible for delivering high‑performance, reliable EPS solutions to commercial, government, and defense customers. Tasks summary: Architecture Concept & Requirements Define EPS architecture (generation, storage, distribution) that satisfies mission power budget, mass, volume and reliability constraints. Perform trade‑studies (e.g., solar cell type, battery chemistry, regulator topology). Generate system requirements, functional flow block diagrams. Develop the Interface Control Documents (ICD) and Design Description. Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Detailed Design & Analysis Size solar arrays, power‑conditioning units, battery packs, and power distribution units. Build and validate high‑fidelity electrical models for satellite modes, FMECA, Fault detection… Conduct & maintain power budget models, load‑flow, thermal‑power coupling, and survivability analyses (e.g., eclipse, safe‑mode, fault‑tolerant). Cross‑Functional Coordination, Stakeholder & Program Interaction Present technical status, risk analyses, and trade‑study results to senior management. Interface with spacecraft bus teams (power, thermal, structure, avionics). Develop/maintain high‑fidelity power models for mission analysis (e.g., orbit raising, station‑keeping, de‑orbit). Develop tools for power efficiency & optimisation for the satellite. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) Author verification plans, test matrices, and validation procedures for unit & EPS subsystem tests. Support ground‑test & integration campaigns, fueling, thermal vacuum, EMI/EMC, and spacecraft‑level integration. Analyse test data, close out anomalies, and update design baselines. Support FSW integration Technical Leadership & Mentorship Mentor, guide, lead a multidisciplinary team of junior or intermediate system engineers & interns Act as technical liaison with customers, partners and external vendors Act as Continuous Improvement stakeholder Contribute to our client’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management Maintain design and safety standards. Ensure all artefacts, analysis, software, documentations and deliverables are version controlled in PLM environment. Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). Support Technology Road‑Mapping & Innovation Launch‑Site, On‑Orbit & Operations Support Support launch‑site interface checklists with LVI responsible engineer, pre‑launch checkout procedures, and early‑orbit checkout scripts. Provide real‑time engineering support during launch, on‑orbit commissioning, anomaly investigations and contingency operations. Support SOOH development and associated operator trainings. Required Qualifications: B.Sc. in Electrical Engineering, Aerospace or Physics with 8 + years of EPS system design experience on LEO/MEO platforms. Deep knowledge of spacecraft bus subsystems and their interactions. Experience with power‑electronics design and power management hardware. Strong understanding of aerospace system engineering fundamentals Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. Experience with Confluence and JIRA Demonstrated capability to efficiently work with little supervision Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Sainte-Anne-de-Bellevue, Canada Role overview: Our client is seeking a GNC System Engineer for design, integration, verification, and operational support of GNC subsystems for our current and next‑generation remote sensing and communications satellites. The role will require to design the complete subsystem, from algorithm development through hardware implementation, verification, and on‑orbit operation support. The role requires deep expertise in orbital dynamics, attitude‑determination & control, plus real‑time FSW definition and integration, and will work closely with subsystem and mission operations teams throughout the satellite life‑cycle. Tasks summary: Architecture Concept & Requirements Derive GNC functional, performance, and safety requirements (pointing accuracy, slew rate, orbit‑maintenance ΔV, fault‑tolerance) from mission level requirements. Produce System Requirements, Interface Control document (ICD), and Description Document. Perform requirement management and maintain bidirectional traceability throughout the project lifecycle. Modelling & Trade‑Study Conduct trade studies on sensor suites and actuator families. Perform high‑fidelity dynamics simulations (Matlab/Simulink, STK) to meet pointing requirements, maintain error budgets, control‑law stability, fuel consumption, and survivability margins. Algorithm Development Design and implement attitude‑determination algorithms and orbit‑determination solutions. Develop control laws for 3‑axis stabilization, slew maneuvers, station keeping algorithms Validate algorithms with Monte‑Carlo analysis, worst‑case scenarios, and support SIL/HIL testing on avionic test bench. Cross‑Functional Coordination, Stakeholder & Program Interaction Translate algorithms into FSW requirements running on real‑time operating systems. Collaborate with the C&DH and FSW teams to implement TM/TC, schedulers and FDIR logic for GNC. Present technical status, risk analyses, and trade‑study results to senior management. Negotiate and maintain ICDs with subsystems. Support B&P (Phase 0 & pre-phase A). Hardware Selection & Design Specify sensor and actuator hardware, perform interface definition (electrical, mechanical, thermal) and conduct trade on redundancy architectures. Work with structures and thermal engineers to ensure proper mounting, thermal paths, and vibration survivability of GNC hardware aligning with payload requirements. Review harness routing and power distribution for GNC electronics. Integration & Verification (IVV) Author Verification Plans, Test Matrices, and Validation Procedures for unit, subsystem, and spacecraft level GNC tests. Lead functional tests: sensor calibration, actuator command‑response, closed‑loop attitude‑control on testbeds, and on‑orbit checkout sequences. Conduct failure mode and effects analysis (FMEA), fault tree analysis (FTA), and reliability prediction. Technical Leadership & Mentorship Mentor, guide junior engineers and interns. Act as technical liaison with customers, partners and external vendors Act as Continuous Improvement stakeholder Contribute to our client’s knowledge‑base, process enhancements, and standards. Configuration, Documentation & Standards Management Maintain GNC standards (sensor/actuator interface, filter design, control‑law documentation). • Ensure all artefacts, analysis, software, deliverables and documentations are version controlled in PLM environment. Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). Support Technology Road‑Mapping & Innovation On‑Orbit & Operations Support Support procedure developments (detumble, orbit‑maintenance, safe‑mode…etc.). Provide real‑time GNC support during launch, early‑orbit checkout, and contingency events. Analyse on‑orbit telemetry, update filter parameters, and generate performance reports. • Support SOOH development and associated operator training. Required Qualifications: B.Sc. in Electrical Engineering, Aerospace or Physics, (M.Sc. preferred), focused on flight dynamics, control theory, or navigation with 10+ of GNC/AOCS experience on LEO/MEO/GEO platforms. Orbital mechanics, attitude dynamics, and control‑law design (classical and modern optimal control). Proficiency with navigation sensors and actuators. Experience implementing real‑time filtering and control algorithms in embedded code Strong understanding of aerospace system engineering fundamentals. • Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. Experience with Confluence and JIRA. • Demonstrated capability to efficiently work with little supervision. • Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. • Demonstrate excellent written and verbal communications skills in English & French work environment.

Location: Portage, United States Looking for steady, full-time work with the opportunity to earn more every week? Our client is hiring Production Line Workers in Portage, WI . This is a fast-paced food manufacturing position with overtime opportunities and a new $150 weekly perfect attendance bonus . PAY & SHIFTS 1st Shift: 7:00 AM – 3:30 PM | $15.00/hr Overtime: $22.50/hr 2nd Shift: 3:00 PM – 1:30 AM | $15.50/hr Overtime: $23.25/hr WHAT YOU'LL DO Package, label, and inspect food products Fill, seal, band, and box products Palletize finished goods Assist with equipment setup and cleaning Follow food safety and quality procedures Work with your team to meet daily production goals WHAT WE'RE LOOKING FOR Reliable attendance Comfortable working in a fast-paced environment Ability to stand and perform repetitive tasks for extended periods Ability to lift and handle products as required Ability to follow safety and quality procedures Production, manufacturing, warehouse, or food experience is a plus Training provided WHY APPLY? $150 weekly perfect-attendance bonus. Overtime available Weekly pay Full-time opportunity Fast-paced, team-oriented environment Spanish speakers welcome READY TO GET STARTED? If you're looking for weekly pay, overtime, and the opportunity to earn an additional $150 every qualifying week , this could be a great opportunity for you. Apply today and take the next step toward joining the team! Salary: $15.50 – $23.00 / hour

Location: Costa Mesa, United States WHAT YOU’LL DO • Utilize first principle methods and design tools to develop new aircraft products • Own development of primary and secondary aircraft structural parts and assemblies (metallic and composite) from preliminary design through prototype manufacturing • Perform complex modeling and finite element analysis at the detailed component level, major assembly level, and aircraft level (analysis simulations to include strength, buckling, damage tolerance, and delamination) • Apply design for manufacturing concepts to create solutions that are cost effective and easy to manufacture at rate • Conduct trade studies and perform design and analysis research of complex engineering concepts to determine an optimal solution for weight, performance, manufacturability, cost, and/or schedule • Collaborate in a multidisciplinary environment to solve complex, open-ended problems with an emphasis on schedule and cost objectives • Coordinate work with mechanical systems, systems integration, aerodynamics, manufacturing, project engineering, and other team members • Onsite engineering support at manufacturing and integration sites REQUIRED QUALIFICATIONS • Bachelor's in Aerospace Engineering, Mechanical Engineering, or equivalent experience • 5+ years of experience in aerospace structures design, analysis, or related roles • Proficiency in CAD software and experience with engineering data analysis • Proven expertise in structural modeling and simulation tools (e.g., ANSYS, NASTRAN, or equivalent) • Strong understanding of material properties, stress analysis, fatigue assessment, load paths, design practices, and hand calculations • Strong technical knowledge in core engineering principles, fundamental mechanics of composite materials, design, analysis, testing, and fabrication • Excellent problem-solving and communication skills • Self-driven with a strong sense of autonomy and adaptability in a dynamic environment • Eligible to obtain and maintain an active U.S. Secret security clearance QUALIFICATIONS • Experience with clean sheet aircraft configuration • Siemens NX proficiency • FEMAP proficiency • Experience with fast paced prototype design and manufacture of uncrewed aircraft • Experience with high temperature materials selection • Broad experience across a range of aircraft programs • Hands-on experience with manufacturing • Practical aircraft knowledge (pilots license, A&P, etc.)

Location: Bellevue, United States Role Description We're bringing up new hardware built around USB-C Power Delivery controllers and are looking for an embedded firmware engineer to help take these boards from bare PCB to working, production-quality firmware. You'll write and debug firmware on 32-bit ARM microcontrollers, configure companion ICs over I2C/SPI/UART, and work hands-on at the bench in collaboration with our hardware team. Job Responsibilities - Bring up new PCBs: validate power/clocks, connect a debugger, enable peripherals, and get firmware running on new hardware Develop and debug embedded C firmware on ARM Cortex-M-class MCUs Configure and drive companion ICs over I2C or other peripheral buses Implement and debug USB-C / USB-PD behavior (power negotiation, source/sink roles, fault handling, etc.) Debug at the bench with oscilloscope, protocol/logic analyzer, multimeter, and SWD/JTAG Work from datasheets, register tables, and schematics Document configurations and design decisions Collaborate with hardware engineers to isolate hardware vs. firmware issues Required Skills - Strong embedded C on 32-bit MCUs (ARM Cortex-M or similar): interrupts, register-level peripheral work, development under flash/RAM constraints Working understanding of USB-C/USB-PD (source/sink/DRP roles, power contract negotiation) I2C/SPI/UART peripheral/companion-IC communication, configuration, and debug Hands-on hardware bring-up experience: taking a board from power-on to running firmware, or debugging firmware against real hardware Datasheet and schematic literacy: able to configure a part from its register tables and confirm pin/power connections Comfortable with standard bench debug tools: oscilloscope, logic/protocol analyzer, SWD/JTAG debugger, UART logging Git proficiency Preferred Skills - Experience with a Cypress/Infineon MCU SDK/IDE and its middleware (e.g. ModusToolbox, STM32Cube, or similar), including creating/customizing a board support package Firmware update/bootloader work (DFU or equivalent): building and flashing update images Power-path or regulator firmware: VBUS control, fault detection/recovery (OVP/UVP/OCP), enable/soft-start sequencing USB subsystem experience: hubs, DisplayPort Alt Mode, redrivers/retimers, or billboard devices Nice to have - Prior work with Infineon EZ-PD / PMG1 (or Cypress CCGx) PD controllers and ModusToolbox CI for embedded builds USB-IF PD compliance/USB-C requirements familiarity

Location: Port Deposit, United States Job description We are seeking experienced Cherry Picker Operators / Material Handlers to join a fast-paced distribution center in Port Deposit, MD. This role is responsible for safely operating warehouse equipment, picking orders, replenishing inventory, and supporting shipping and receiving operations while maintaining productivity, accuracy, and safety standards. Responsibilities Operate a Cherry Picker / Order Picker Pick and replenish inventory Use RF scanners to process orders Load, unload, and move materials Support shipping, receiving, and inventory control Requirements Previous Cherry Picker experience preferred Comfortable working at heights Ability to lift up to 50 lbs Steel-toed boots required (must cover the ankle) Background check required Drug screen required Available Shifts 1st Shift Thursday, Friday, Saturday + every other Wednesday 6:00 AM – 6:00 PM $21.50/hour 2nd Shift Thursday, Friday, Saturday + every other Wednesday 6:00 PM – 6:00 AM $22.50/hour Apply today for immediate consideration!

Location: Durham, United States Durham, NC Pay: $15.50/hr (Day Shift) $16.13/hr (Night Shift) Schedule: 12-hour rotating shifts Day Shift: 7 AM – 7 PM Night Shift: 7 PM – 7 AM 3 days one week, 4 days the next Weekend availability required (2 weekends/month) What You'll Do: Pick, pack, and prepare orders for shipping Label and sort products accurately Follow work instructions and quality standards Work with a team to meet daily goals What We're Looking For: No experience required – paid training provided Ability to stand for extended periods and lift up to 20 lbs Reliable transportation Ability to pass a background check and drug screen Why Join Us? ⭐ Weekly Pay ⭐ Full-Time, Stable Schedule ⭐ Paid Training ⭐ Career Growth Opportunities ⭐ Supportive Team Environment Apply today and start your warehouse career with a growing team!

Location: India Job Title: Accounting Specialist Employment Type: 1 year (Contract with a possibility extension) Location : Remote Position Level: At least 1 year of experience About the Role As an Accounting Specialist, you'll support day-to-day accounting operations with a focus on billing, accounts receivable, reconciliations, and recordkeeping. You'll work remotely with a structured process, clear expectations, and support from experienced teams. This role is ideal if you like order, systems, and knowing your work directly supports business success. What You'll Be Doing Billing & Accounts Receivable Create and send customer invoices accurately and on time Track outstanding payments and follow up on overdue accounts Help ensure receivables are collected in a timely manner Accounting & Recordkeeping Enter invoices, payments, and expenses into QuickBooks Record cash receipts and disbursements accurately Keep financial records organized and up to date Reconciliations & Reporting Support Perform monthly bank reconciliations Reconcile accounts regularly to ensure accuracy Support audits and basic financial reporting tasks Team & Admin Support Provide approved financial information to external accountants Maintain a clean and organized accounting filing system Support management with basic clerical or accounting tasks Assist with other accounting-related responsibilities as needed What We're Looking For At least 1 year of experience in accounting or accounts receivable Experience using QuickBooks Proficient in Excel Good written and spoken English communication skills Detail-oriented, organized, and reliable Comfortable working remotely and managing routine tasks independently Ready to Apply? If you're detail-driven, comfortable with accounting tools, and looking for a stable remote role supporting U.S. businesses, we'd love to hear from you. At H!KINEX, you'll find a remote-first, growth-focused environment where your work is valued, expectations are clear, and consistency is appreciated.

Location: New Albany, United States Location: New Albany, Ohio Shift Options: Day Shift: Monday–Friday, 7:00 AM – 3:30 PM → $14.50/hr Join our client's team as a Warehouse Associate ! We’re looking for dependable, motivated individuals ready to work in a fast-paced environment. Spanish speakers are welcome (Creole and French speakers encouraged as well!). What You’ll Do: Package, seal, label, and box products accurately Maintain a steady pace to meet production deadlines Scan and handle vendor labels What We’re Looking For: Ability to stand and perform physical tasks throughout the shift Strong attention to detail and reliability Positive attitude and willingness to learn Warehouse or production experience is a plus, but not required Apply today — we’re scheduling interviews now! Salary: $13.00 – $14.50 / hour

Location: Davao, Philippines; Metro Manila, Philippines; Philippines As a Security Analyst, you will be a crucial part of our cybersecurity team. This role is designed for individuals who are passionate about cybersecurity and eager to develop their skills in a dynamic and supportive environment. This resource will assist in monitoring, analyzing, and responding to security incidents, ensuring the protection of our clients' data and systems. Key Responsibilities: Security Monitoring and Analysis: Monitor security alerts and events using various security tools and platforms. Analyze security incidents to determine their impact and severity. Assist in the investigation and resolution of security incidents. Assist with checking and resolving security agent related issues. Incident Response: Participate in the incident response process, including identification, containment, eradication, and recovery. Document and report security incidents and actions taken. Vulnerability Management: Assist in the identification and assessment of vulnerabilities in client systems. Support the implementation of remediation measures to address identified vulnerabilities. Threat Intelligence: Stay updated on the latest cybersecurity threats and trends. Assist in the collection and analysis of threat intelligence to enhance security posture. Security Awareness and Training: Support the development and delivery of security awareness training for clients. Promote best practices for cybersecurity within the organization and to clients. Participate in group tabletop exercises Compliance and Reporting: Assist in ensuring compliance with relevant security standards and regulations. Prepare and maintain security documentation and reports. Collaboration and Support: Work closely with senior security analysts and other IT teams to enhance overall security. Provide support for security-related projects and initiatives. Direct Manager: Security Operations Manager Qualifications: Bachelor's degree in Cybersecurity, Information Technology, or a related field. Basic understanding of cybersecurity principles and practices. Familiarity with security tools and technologies (e.g., SIEM, firewalls, antivirus software). Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Eagerness to learn and adapt in a fast-paced environment. Preferred Skills: Relevant certifications (e.g., CompTIA Cybersecurity Analyst / CySA+). Experience with scripting or programming languages (e.g., Python, PowerShell). Knowledge of network protocols and operating systems. Salary: $1,000 – $2,000 / month

Location: United States WHAT YOU’LL DO • Utilize first principle methods and design tools to develop new aircraft products • Own development of primary and secondary aircraft structural parts and assemblies (metallic and composite) from preliminary design through prototype manufacturing • Perform complex modeling and finite element analysis at the detailed component level, major assembly level, and aircraft level (analysis simulations to include strength, buckling, damage tolerance, and delamination) • Apply design for manufacturing concepts to create solutions that are cost effective and easy to manufacture at rate • Conduct trade studies and perform design and analysis research of complex engineering concepts to determine an optimal solution for weight, performance, manufacturability, cost, and/or schedule • Collaborate in a multidisciplinary environment to solve complex, open-ended problems with an emphasis on schedule and cost objectives • Coordinate work with mechanical systems, systems integration, aerodynamics, manufacturing, project engineering, and other team members • Onsite engineering support at manufacturing and integration sites REQUIRED QUALIFICATIONS • Bachelor's in Aerospace Engineering, Mechanical Engineering, or equivalent experience • 5+ years of experience in aerospace structures design, analysis, or related roles • Proficiency in CAD software and experience with engineering data analysis • Proven expertise in structural modeling and simulation tools (e.g., ANSYS, NASTRAN, or equivalent) • Strong understanding of material properties, stress analysis, fatigue assessment, load paths, design practices, and hand calculations • Strong technical knowledge in core engineering principles, fundamental mechanics of composite materials, design, analysis, testing, and fabrication • Excellent problem-solving and communication skills • Self-driven with a strong sense of autonomy and adaptability in a dynamic environment • Eligible to obtain and maintain an active U.S. Secret security clearance QUALIFICATIONS • Experience with clean sheet aircraft configuration • Siemens NX proficiency • FEMAP proficiency • Experience with fast paced prototype design and manufacture of uncrewed aircraft • Experience with high temperature materials selection • Broad experience across a range of aircraft programs • Hands-on experience with manufacturing • Practical aircraft knowledge (pilots license, A&P, etc.)

Location: Costa Mesa, United States; United States What You'Ll Do Full Cycle PCB Design: Translate system-level propulsion requirements into robust designs. Perform schematic capture and high-density PCB layouts (with a strong preference for Altium), component selection, bring-up, test, debug, and integration with the propulsion system. Engine System Electronics: Design and optimize flight controller circuits, power distribution/supplies, motor controller circuits, and electromagnetic actuator circuits. Rigorous Analysis: Conduct circuit simulations, worst-case analysis (WCA), thermal analysis, DFMEA, and component derating to ensure reliability under extreme vibration and temperature environments. Comprehensive Testing: Lead board bring-ups, Design Verification Testing (DVT), qualification (Qual) testing, and functional testing. Collaborative Design: Provide electrical support and collaborate closely with mechanical, thermal, software, test, quality, manufacturing, and systems engineering teams for development. Peer Reviews: Conduct peer-level and cross-discipline design reviews. Root Cause Analysis: Perform root cause and failure analysis in support of engine test and field operations. Required Qualifications Education & Experience: Bachelor’s Degree in Electrical Engineering (BSEE) with 5+ years of experience designing, testing, and troubleshooting complex board designs. Technical Fundamentals: Solid engineering fundamentals across Analog, Digital, and Power Electronics. Software & Tools: Deep proficiency with electronic design tools, specifically Altium Designer (or equivalent for schematic and layout) and LTSpice (or equivalent for circuit simulation). Laboratory Equipment: Competence with laboratory test equipment such as oscilloscopes, logic analyzers, thermal chambers, spectrum analyzers, function generators, DMMs, electronic loads, power supplies, and test automation. Interfaces & Protocols: Familiarity with standard interfaces (CAN, I2C, SPI, Ethernet) and common MCU/CPU architectures. Security Clearance: Eligible to obtain and maintain an active U.S. Secret security clearance. Preferred Qualifications Education: Master’s Degree in Electrical Engineering (MSEE). Advanced Tools: Experience with MATLAB / Simulink for data analysis, control loop modeling, or system simulations.

Location: India Marketing Content Strategist and Copywriter Department: Marketing Employment Type: Full-Time Location: India (Remote) About HIKINEX HIKINEX is a multi-channel integrated service provider helping companies scale faster, boost efficiency, and drive greater profitability. We build dedicated remote teams in sales, recruitment, marketing, and operations so our clients can work on their business instead of in it. We're looking for a Marketing Content Strategist & Copywriter who can define, develop, and maintain the company's voice across every customer touchpoint. This role isn't about simply writing content - it's about transforming ideas into clear, engaging, persuasive communication that reflects our brand and helps drive business growth. Role Purpose As the Marketing Content Strategist & Copywriter, you will own HIKINEX's written communication. You'll be responsible for developing our brand voice, creating high-quality marketing and product content, improving storytelling, and ensuring consistency across websites, presentations, social media, training materials, software, recruiting, sales, and future client marketing projects. You'll work closely with designers, marketers, product teams, recruiters, leadership, and video editors to ensure every piece of content is clear, engaging, and aligned with our brand. Key Responsibilities • Own and maintain HIKINEX's brand voice. • Write and edit website copy. • Develop product messaging and positioning. • Create content for landing pages. • Write email marketing campaigns. • Write LinkedIn and social media content. • Develop case studies and success stories. • Write presentations and pitch decks. • Create content for onboarding and training materials. • Create scripts for promotional and training videos. • Write product launch announcements. • Review and edit content created by other departments. • Build a centralized messaging and copy library. • Collaborate with designers to ensure visuals and messaging work together. • Use AI tools to improve research, writing, editing, and content production. Required Skills • Exceptional writing and editing skills. • Strong storytelling ability. • Brand messaging and positioning. • Marketing psychology. • B2B copywriting. • Product marketing. • Presentation writing. • Content strategy. • Information architecture. • Ability to simplify complex ideas. • Strong research skills. • Excellent attention to detail. Tools & Technologies Microsoft 365, Grammarly, Canva AI Tools We're building an AI-first marketing department. Candidates should be comfortable using: ChatGPT, Claude, Perplexity, Grammarly AI, NotebookLM, Canva AI. AI should be used to improve productivity — not replace strategic thinking or creativity. Experience Required • 3+ years in content marketing, copywriting, or brand strategy. • Experience writing for B2B companies. • Experience with SaaS, technology, recruiting, or software companies preferred. • Experience creating multi-channel marketing campaigns. Work Samples Please include 3–5 examples of your work that demonstrate your writing, messaging, and strategic thinking. Examples may include: • Website copy • Landing pages • Product messaging • Email campaigns • LinkedIn or social media content • Case studies • Sales collateral • Presentation or pitch deck copy • Brand messaging guidelines • Blog articles or long-form content If some work is protected by an NDA, candidates may provide personal projects or anonymized examples that showcase their writing style and strategic thinking. Who Will Thrive in This Role You're someone who enjoys turning complex ideas into simple, compelling stories. You believe that every word matters and that great content should educate, persuade, and inspire action. You're comfortable working across multiple departments, collaborating with designers and marketers, and using AI to work smarter without sacrificing quality. You don't just write, you think strategically about messaging, customer psychology, and how content supports business growth. We Encourage You to Apply If you don't meet every single requirement listed above, please don't let that stop you from applying. We'd still like to hear from you if you're excited about this role and bring relevant experience. Skills and qualifications can be built on the job — genuine interest and the right attitude matter just as much to us

Location: Colombia Reports to: Executive Director Location: Fully Remote About the Company Our client is a fast-growing, forward-thinking organization focused on reimagining how businesses operate through innovation, care, and agility. Their culture emphasizes collaboration, transparency, and trust, with a strong focus on empowering team members to take ownership, share ideas openly, and grow alongside the business. They value speed, adaptability, and continuous learning, and they celebrate progress and wins at every stage. About the Role The Finance & Data Analytics Manager will serve as the strategic owner of the company’s financial visibility and business performance insights. This role is responsible for overseeing financial operations while transforming data into actionable intelligence that supports decision-making across leadership, sales, and operations. The position blends finance, analytics, and operational reporting, with ownership over forecasting, financial reporting, sales analytics, and cash flow visibility. Success in this role requires the ability to connect financial data with operational outcomes and ensure leadership has clear, timely insights to act with confidence. Responsibilities Manage and analyze sales, expense, and performance data to produce clear, data-driven insights Build and maintain dashboards and financial models that track overall company health and sales performance Oversee bookkeeping and ensure financial records are accurate, organized, and current Lead payroll review, billing, and payment processes with a focus on accuracy and timeliness Review and process agent invoices and commission calculations Reconcile accounts and track inventory across systems to ensure data consistency Partner with leadership on revenue forecasting, growth modeling, and KPI tracking Identify opportunities to improve processes and automate finance and reporting workflows Experience & Education 5+ years of experience in finance, FP&A, or data analytics roles Experience in e-commerce, DTC, or fast-moving startup environments Bachelor’s degree in Finance, Accounting, Economics, Data Analytics, or a related field Advanced proficiency in Excel/Google Sheets (pivot tables, dashboards, automation) Experience with financial and reporting tools (e.g., QuickBooks, Airtable, Power BI) Familiarity with workflow and automation tools such as Zapier, n8n, and Make Comfortable working with project and data visualization tools like Asana, Vibe Canvas, and Lucid Experience integrating data across systems to create unified dashboards or reporting flows Certifications (Preferred, Not Required) CPA, CFA, or data analytics-related certification

Location: India About HIKINEX HIKINEX is a multi-channel integrated service provider helping companies scale faster, boost efficiency, and drive greater profitability. We build dedicated remote teams in sales, recruitment, marketing, and operations so our clients can work on their business instead of in it. Role Summary We're looking for a motivated Marketing Associate to support our growing Marketing Department across content, campaigns, creative production, and marketing operations. This is an excellent opportunity for someone early in their marketing career who is eager to learn, take ownership, and develop across multiple areas of marketing. You'll work closely with the Creative Director, Content Strategist, Designers, and Marketing Leads while gaining hands-on experience in branding, content creation, social media, campaign execution, project coordination, and AI-assisted marketing. Beyond supporting campaigns, you'll play an important role in keeping the Marketing Department organized by coordinating projects, maintaining documentation, managing marketing assets, and ensuring deliverables move efficiently through the team's workflow. We're building an AI-first Marketing Department, so curiosity about AI tools and a willingness to adopt new technologies is highly encouraged. Key Responsibilities Assist with creating and editing marketing materials in Canva (social media posts, presentations, one-pagers, landing page assets, etc.). Support the Creative Director and Content Strategist with day-to-day marketing initiatives. Schedule and publish content across social media platforms. Coordinate marketing campaigns, product launches, and internal marketing activities. Organize and maintain the department's digital asset library, ensuring files are consistently named, categorized, and easy to locate. Update and maintain project progress in project tracking tools. Conduct research to support marketing campaigns, products, competitors, and industry trends. Proofread and format marketing content before publication. Track project timelines and follow up with team members to ensure deliverables stay on schedule. Help create and maintain SOPs, templates, training materials, and marketing documentation. Support recruiting and employer branding initiatives when required. Leverage AI tools to accelerate research, content creation, documentation, and administrative tasks. Take ownership of assigned work, communicate progress proactively, and identify blockers early. Required Skills Strong organizational and time management skills. Excellent attention to detail. Good written and verbal communication skills. Working knowledge of Canva. Comfortable learning new tools and software quickly. Ability to manage multiple projects simultaneously. Problem-solving mindset with a proactive approach. Comfortable working in a fast-paced environment where priorities may change. Tools & Technologies Canva, Microsoft 365 AI Tools HIKINEX is building an AI-first Marketing Department. Familiarity with tools such as ChatGPT, Claude, Canva AI, or similar AI productivity tools is highly desirable. We encourage continuous learning and experimentation with AI to improve efficiency and quality of work. Experience Required 0–2 years of experience in marketing, internships, or related projects. No formal degree required. Relevant experience, personal projects, certifications, or a strong portfolio are equally valued. Experience using Canva or similar design tools is preferred. Work Samples Please include 2–3 examples of work you're proud of. This could include social media posts, presentations, personal projects, university work, marketing campaigns, or content you've created. Professional experience is not required — we're interested in your potential, creativity, and attention to detail. Who Will Thrive in This Role You're organized, curious, and eager to learn. You enjoy bringing structure to fast-moving projects, communicating with people, and helping teams stay organized. You're excited to build your marketing career, comfortable using technology to work smarter, and willing to take ownership as your responsibilities grow. We Encourage You to Apply If you don't meet every requirement listed above, we still encourage you to apply. We're looking for people with curiosity, initiative, and a willingness to learn. Skills can be developed over time — we value attitude, ownership, and growth potential just as much as experience.

Location: Philippines Job Title: Accounting Specialist Employment Type: Full-time (Remote) Position Level: At least 1 year of experience Education Level : No specific requirements Job Summary: We are seeking a detail-oriented and organized Accounting Specialist to join our team. The ideal candidate will have experience in managing accounts receivable, handling billing processes, and maintaining accurate financial records. As an Accounting Specialist, you will play a crucial role in ensuring smooth financial operations by performing a variety of accounting tasks, including billing, collections, audits, account reconciliation, and supporting financial reporting. This position offers a remote, full-time opportunity for candidates with at least 1 year of relevant experience. Duties and Responsibilities: Billing and Accounts Receivable (AR) Collections: Issue invoices to customers and follow up on outstanding payments. Ensure timely collection of receivables and follow-up on overdue accounts. Financial Transactions and Record-Keeping: Post information to QuickBooks from various source documents such as customer invoices, cash receipts, and supplier invoices. Record cash receipts and disbursements accurately in the system. Account Reconciliation: Perform monthly reconciliation of all bank accounts. Conduct periodic reconciliation of all accounts to ensure accuracy. Support External Accountants: Provide requested financial information to external accountants as needed and approved. File and Maintain Records: Maintain an orderly accounting filing system to ensure all documents are easily accessible and up-to-date. Maintain the chart of accounts to reflect accurate and comprehensive records. Administrative Support: Provide clerical and administrative support to management as requested. Perform additional duties as necessary, as directed by the accounting or management teams. Qualifications: Experience: 1-3 years of experience in managing Accounts Receivable processes (preferred). Technical Skills: Proficiency in QuickBooks accounting software. Strong working knowledge of Excel for financial data analysis and reporting. Communication: Excellent written and verbal English communication skills are required to interact with clients and internal teams. Education: No specific educational requirements; however, a degree or certification in accounting or a related field is a plus.

Location: Costa Mesa, United States What You'Ll Do Full Cycle PCB Design: Translate system-level propulsion requirements into robust designs. Perform schematic capture and high-density PCB layouts (with a strong preference for Altium), component selection, bring-up, test, debug, and integration with the propulsion system. Engine System Electronics: Design and optimize flight controller circuits, power distribution/supplies, motor controller circuits, and electromagnetic actuator circuits. Rigorous Analysis: Conduct circuit simulations, worst-case analysis (WCA), thermal analysis, DFMEA, and component derating to ensure reliability under extreme vibration and temperature environments. Comprehensive Testing: Lead board bring-ups, Design Verification Testing (DVT), qualification (Qual) testing, and functional testing. Collaborative Design: Provide electrical support and collaborate closely with mechanical, thermal, software, test, quality, manufacturing, and systems engineering teams for development. Peer Reviews: Conduct peer-level and cross-discipline design reviews. Root Cause Analysis: Perform root cause and failure analysis in support of engine test and field operations. Required Qualifications Education & Experience: Bachelor’s Degree in Electrical Engineering (BSEE) with 5+ years of experience designing, testing, and troubleshooting complex board designs. Technical Fundamentals: Solid engineering fundamentals across Analog, Digital, and Power Electronics. Software & Tools: Deep proficiency with electronic design tools, specifically Altium Designer (or equivalent for schematic and layout) and LTSpice (or equivalent for circuit simulation). Laboratory Equipment: Competence with laboratory test equipment such as oscilloscopes, logic analyzers, thermal chambers, spectrum analyzers, function generators, DMMs, electronic loads, power supplies, and test automation. Interfaces & Protocols: Familiarity with standard interfaces (CAN, I2C, SPI, Ethernet) and common MCU/CPU architectures. Security Clearance: Eligible to obtain and maintain an active U.S. Secret security clearance. Preferred Qualifications Education: Master’s Degree in Electrical Engineering (MSEE). Advanced Tools: Experience with MATLAB / Simulink for data analysis, control loop modeling, or system simulations.