Вакансии

Location: Dallas, United States A rapidly expanding national commercial property services provider is seeking a high-performance Account Manager to spearhead their commercial pest control and property maintenance portfolio within the Greater Dallas area. This position requires a refined blend of structured business-to-business (B2B) outside sales acquisition and high-yield strategic relationship management. Operating directly within the regional marketplace, you will serve as the consultative partner to Property Managers, Regional Supervisors, and Real Estate Ownership Groups to deploy high-value, contractual property compliance and maintenance strategies. For an ambitious business development professional with an established commercial footprint, this role offers an exceptional uncapped earning trajectory within a robust regional corporate infrastructure. Key Responsibilities New Business Acquisition: Execute proactive outbound prospecting, structured cold calling, and targeted local networking to secure long-term contractual agreements across the regional multifamily and commercial sectors. Strategic Relationship Management: Establish, cultivate, and scale deep relational alignments with key decision-makers, regional operational supervisors, and corporate real estate asset managers. Pipeline Architecture: Own and manage the end-to-end commercial sales cycle seamlessly, executing high-yield processes from initial warm/cold outbound engagement through to executive contract sign-off. Value-Based Advisory: Construct and deliver technically sound, ROI-driven service proposals that explicitly communicate financial yield, service superiority, and risk mitigation benefits. Portfolio Expansion & Retention: Partner continuously with current client networks to guarantee baseline contract renewals, defend existing portfolios against market attrition, and systematically cross-sell expanded facilities solutions. Local Ecosystem Integration: Represent the brand as a highly visible industry professional at the Apartment Association of Greater Dallas (AAGD) and affiliated commercial real estate networking functions. Data Infrastructure Maintenance: Maintain flawless, real-time pipeline reporting, transactional progression logs, and corporate communications tracking within Salesforce CRM environments. Position Requirements Professional B2B Experience: Minimum of two (2) years of verifiable corporate business-to-business outside sales experience. Prior technical tenure within structural pest control, commercial facilities maintenance, or B2B property services is mandatory. Quota Achievement: A documentable professional history of consistently achieving or outperforming defined financial quotas, net revenue expansions, and gross profit benchmarks. Core Sales Methodologies: Advanced proficiency in strategic outbound hunt mechanics, enterprise-level gatekeeper navigation, multiline pipeline orchestration, and closing multi-site corporate agreements. Executive Communications: Exceptional command of verbal and written communication, with the professional presence required to deliver boardroom presentations to executive real estate leadership. Modern Technical Proficiency: Expertise navigating complex CRM ecosystems (Salesforce preferred), field data tablets, and standard professional software suites. Territorial Mobility: Possession of a valid driver's license with a clean driving record and the daily capacity for territorial travel across the Greater Dallas geographic footprint. Preferred Qualifications Industry Infrastructure: Direct sales exposure interacting directly with multifamily housing operations, commercial asset portfolios, or regional real estate networks. Regional Professional Network: Existing corporate relationships with Dallas-area property management companies or active professional tenure within the Apartment Association of Greater Dallas (AAGD). Recurring Revenue Knowledge: Prior experience structuring and securing service-based contracts built around recurring contractual pipelines. Compensation, Benefits & Corporate Structure Base Remuneration: $55,000 predictable annual base salary. Performance Incentive: Highly competitive, uncapped, performance-engineered commission structure designed to maximize earnings for high-performing acquisitions professionals. Health Infrastructure: Comprehensive corporate healthcare options including medical, dental, vision, and company-sponsored life insurance programs. Retirement Planning: Structured 401(k) company matching framework with a standard 90-day onboarding full vestment schedule. Paid Leave Framework: Flexible Paid Time Off (PTO) allocation complemented by structured parental and extended medical leave provisions. Corporate Tools & Account Coverage: Complete expense allocation providing full reimbursement for territory mileage, client entertainment, asset tools, and professional association association fees. Continuous Professional Track: Collaborative, feedback-rich environment featuring clear pathways for continuous professional upward mobility. Benefits: 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Parental leave Vision insurance Experience: Sales: 2 years (Required) Pest control: 1 year (Required) Location: Dallas, TX 75244 (Required) Salary: $55,000+ / year

Location: Austin, United States Location: Austin, TX 78701 Hire type: Full-Time Shift: No Shift Specified Pay Range: $50k - $55k /yr Account Manager – Commercial Property Pest Control B2B Sales | Multifamily Portfolio | Greater Austin Area **Position Summary: **Our client, a rapidly expanding commercial property services provider, is seeking a dynamic Account Manager to spearhead their multifamily and pest control division in Austin, TX . This role perfectly balances a hunter mindset with high-impact relationship management. In this position, you will partner directly with Property Managers, Regional Supervisors, and ownership groups across the Greater Austin area to deliver high-value, ROI-driven property management solutions. If you are a competitive sales professional who thrives on closing new accounts, capturing market share, and cultivating long-term local alignment, this opportunity provides a lucrative uncapped earning platform in a booming regional economy. Key Responsibilities Drive New Business: Prospect, cold-call, and network to secure premium B2B accounts within the Greater Austin multifamily sector. Nurture Relationships: Build deep, trusted partnerships with local property management decision-makers, regional supervisors, and real estate ownership groups. Own the Sales Cycle: Manage the full commercial sales pipeline seamlessly from cold outbound prospecting through structured contract execution. Present Economic Value: Deliver compelling, value-based proposals that explicitly showcase service superiority and bottom-line financial impact. Expand Existing Accounts: Proactively engage current client portfolios to maintain excellent retention metrics and cross-sell supplementary services. Network Locally: Represent the brand at Austin Apartment Association (AAA) events and maintain an active, highly visible presence within the local multifamily ecosystem. Track Performance: Maintain rigorous, real-time pipeline activity tracking, accurate forecasting, and key account information within Salesforce. Position Requirements B2B Sales Experience: Minimum of two (2) years of proven business-to-business sales experience, specifically within the pest control industry. Track Record: Demonstrated history of consistently hitting or exceeding defined revenue quotas and gross profit targets. Core Sales Skills: Strong competency in cold calling, outbound prospecting, account navigation, and closing multi-site agreements. Communication: Excellent verbal and written communication skills with the absolute confidence to pitch to property-level staff and executive corporate suites. Tech Savvy: Proficient execution using CRM infrastructure, iPads, modern sales productivity apps, and standard tech suites. Mobility: Willingness and capacity to travel daily throughout the assigned Greater Austin geographic territory. Preferred Qualifications Industry Background: Direct sales experience navigating the multifamily housing, property management, or commercial real estate space. Local Network: Existing relational network with Austin-area property management operations, ownership networks, or active professional tenure within the AAA . Business Model: Prior experience working with service-based offerings centered on contractual, recurring revenue pipelines. Compensation, Benefits & Culture Base Compensation: $50,000 - $55,000 predictable annual base salary. Commission Potential: Highly competitive, uncapped commission structure engineered to reward top-tier performers. Health Infrastructure: Comprehensive medical, dental, vision, and foundational life insurance options. Retirement Planning: 401(k) company matching program fully vesting after 90 days of employment. Time Off: Flexible Personal Time Off (PTO) package alongside structured maternity, paternity, and extended family leave models. Tools & Expenses: Complete corporate travel and expense coverage covering all territory mileage, client entertainment, and local association fees. Professional Growth: A highly collaborative, feedback-rich environment featuring continuous leadership development and career trajectory opportunities. You should be proficient in: Territory Sales Business-to-Business (B2B) Salary: $50,000 – $55,000 / year

Location: Creola, United States Position Summary We are seeking an experienced Burn Table and Plate/Pipe/Angle Roll Operator to join our team in Creola, AL. This is a hands-on, high-volume production role supporting heavy fabrication projects. This position requires a seasoned professional with proven experience who can walk in and operate machinery independently on day one. You must also be willing to assist with other shop tasks as needed to keep production moving. The ideal candidate is safety-focused, mechanically skilled, and fully capable of independently burning plate and rolling plate, pipe, and angle profiles strictly to engineering prints. What You Will Do Burn Table Operation: Power up CNC burn tables from startup, load existing cutting programs, verify nesting layouts, and begin cutting without assistance. Set torch heights, check consumables, confirm cut parameters, and perform basic troubleshooting. Rolling Equipment Operation: Operate 4-roll plate rolling machines to roll thin to heavy plate steel up to 1-1/2” thick x 10’ wide. Shape components like shell plates for storage tanks, vessel cans, and manway necks. Section Bending: Run 3-roll pipe rollers (1” up to 4’ diameter) and 3-roll angle rollers to bend angles from 1”x1” up to 5”x5” (both leg-in and leg-out). Material Handling: Safely load and unload heavy raw plates and finished parts using forklifts and overhead cranes. Quality Control: Verify finished parts against drawings, troubleshoot cut-quality issues, and mark, etch, and organize burned parts for the welding and fabrication teams. What We Are Looking For Experience: 5–10 years of professional plate cutting and rolling experience is highly preferred. Materials: Prior experience handling and shaping carbon steel and/or stainless steel. Autonomy: Must be capable of working independently with little to no supervision. Testing: Because this is a senior role, candidates will be asked to complete a hands-on equipment operation test prior to receiving a formal job offer. Why Apply? Top-Tier Earning Potential: We reward elite skills with a highly competitive compensation structure. Complete Work Autonomy: We don’t micromanage. If you can walk in, read the blueprints, check your nests, and execute clean cuts and rolls independently, we step back and let you run your station. Build Massive, Crucial Equipment: Your daily work directly impacts heavy-duty industrial builds, shaping components for large storage tanks, pressure vessels, and structural components. Stable, Long-Term Growth: Move past unstable short-term gigs. This is a secure, full-time production role within a highly collaborative, safety-first shop culture.

Location: Englewood, United States We're seeking a skilled, patient-focused X-Ray Technologist to join a thriving clinical team in Englewood, NJ . In this role, you will work directly with patients in a fast-paced environment, ensuring the highest standards of imaging quality, patient comfort, and radiation safety. Whether you are an established outpatient specialist or a hospital-based technologist looking to transition into a dynamic outpatient orthopedic setting, we want to hear from you! What You Will Do (Day-to-Day) Perform high-quality X-rays in strict accordance with physician orders and established clinical protocols. Prepare and position patients safely and accurately, ensuring optimal exposure while prioritizing patient comfort. Operate and adjust advanced X-ray equipment with precision. Educate patients on procedures, answering questions to ease anxiety and ensure compliance. Maintain rigorous safety standards , strictly adhering to patient and radiation safety protocols. Manage documentation , maintaining accurate patient records, imaging logs, and compliance files. Oversee environment upkeep , ensuring the X-ray room remains clean, sterile, and well-organized. * What We Are Looking For Experience: 2–3+ years of hands-on X-ray experience. Clinical Setting: Strong background working directly with patients in a fast-paced clinical environment. Technical Expertise: Deep understanding of X-ray procedures, positioning, exposure factors, and equipment operation. Soft Skills: Exceptional communication, patient empathy, and customer service skills. Independence: Proven ability to work autonomously and efficiently. Safety First: Uncompromising commitment to radiation safety and patient care. Preferred Plus: 1+ years of X-ray experience specifically within an outpatient orthopedic clinic . * Note to Hospital Techs: Candidates with strong hospital-based experience, excellent patient-facing skills, and a strong desire to transition to an outpatient orthopedic environment are highly encouraged to apply! Compensation & Flexibility Our starting range is $32.00 – $40.00/hour . However, we value exceptional talent. If your experience warrants a higher rate, we encourage you to apply and discuss your compensation expectations with us—we maintain flexibility for the right candidate. Salary: $32 – $40 / hour

Location: United States Our client is hiring a SAR Payload Systems Engineer to support current and next-generation Earth-observation satellites. You will own the definition, design, integration, verification and sustainment of SAR payload subsystems across several satellite programs and act as the technical interface with customers, primes and internal teams. Fully remote from the US is now accepted. What you will do • Gather and trace payload requirements from mission level down to subsystem level • Design the SAR payload architecture: antenna arrays and RF front-end Tx/Rx, digital beamforming, processing chain and digital electronics, power, thermal, mass • Lead conceptual, preliminary and detailed design with trade studies and performance budgets; produce ICDs; specify hardware and review schematics and layouts • Performance simulations for tolerance budgeting and image quality; support SAR and moving-target-indication algorithm development; payload DC power budget; FMECA, fault tree, FDIR, reliability • Build the payload verification master plan (unit, subsystem, payload, environmental and EMC tests); lead test automation and reporting • Support mission operations: payload health monitoring, on-orbit anomaly root cause, telemetry analysis, operator training What you need • Degree in Electrical Engineering, Computer Science or Physics with 5+ years supporting remote sensing system development, integration and test on LEO/MEO missions • Strong technical writing (requirements, ICDs, test procedures, risk reports) and presentation skills • Hands-on systems integration and test experience; Confluence and JIRA • Works well with little supervision; strong written and spoken English (French an asset) • US citizen or permanent resident

Location: United States Our client is hiring a Staff-level engineer to lead a highly specialized team building cutting-edge, high-throughput signal processing systems that turn raw satellite radar data into SAR imagery, deployed on the ground and potentially on board spacecraft. Fully remote from the US; optional relocation to Vancouver later. What you will do • Lead the definition, specification, technical risk management, integration, verification and validation of SAR processors, new and existing • Supervise interface control document development; ensure hardware and software components integrate into the larger ground or space segment • Coordinate trade-offs between theoretical algorithms and their implementation on the actual processor • Troubleshoot root causes of processing errors and artefacts in image products and find mitigations; optimize processing time toward near-real-time • Take part in mission design trade-off studies; mentor the team; advise senior management and new business pursuits What you need • Degree in Electrical Engineering, Engineering Physics, Math or Physics (or equivalent) • 12+ years in an engineering environment, including 5+ years on complex signal processing systems (radar, medical imaging, computer vision or similar) and 10+ years in a large product development or systems engineering environment • Solid grounding in high-speed, high-throughput data analysis and transmission design • MATLAB, Python or C++ • Clear communicator to technical, sales, executive and customer audiences • US citizen or permanent resident Nice to have : SAR remote sensing (system design, operation, exploitation, calibration); satellite SAR payload design and operations; FPGA or ASIC based system design; geospatial data.

Location: United States Our client, a global leader in Earth-observation satellites, is hiring a Senior Systems Engineer (MTS), SAR Missions. Fully remote from the US is fine for the first couple of years; relocation to the Vancouver, BC area later is optional, not required. What you will do • Contribute end-to-end to SAR engineering across the full lifecycle of a SAR space mission • Contribute to the mission concept of operations and high-level mission specs, including spacecraft budgets for the SAR payload • Lead technical solutions for mission enhancements: beam mode design, mission concept design, image quality modelling • Take part in mission-level risk management, integration, verification and validation • Own design trade-offs across spacecraft systems, coverage and access, SAR payload, SAR processor and end-user applications • Key member of the team through commissioning, calibration and early operations; mentor others What you need • Graduate degree in Electrical Engineering, Engineering Physics, Math or Physics (or equivalent) • 10+ years with radar, SAR or similar active imaging systems (hardware, processors and/or data products) • 5+ years in a space systems engineering or similar complex systems environment • SAR remote sensing experience: system design, operation, applications/exploitation and/or calibration • Strong communicator • US citizen or permanent resident Nice to have : MATLAB, Python; satellite SAR payload design and operations; space mission design; spacecraft design; geospatial data.

Location: United States Our client, a global leader in Earth-observation satellites, is hiring a Staff Systems Engineer for its Synthetic Aperture Radar (SAR) missions. Fully remote from the US is fine for the first couple of years; relocation to the Vancouver, BC area later is optional, not required. What you will do • End-to-end oversight of SAR engineering across the full lifecycle of a SAR space mission • Own the mission concept of operations and high-level mission specs, including spacecraft budgets that drive the SAR payload • Lead technical solutions for current and future SAR missions: beam mode design, mission concept design, SAR image quality modelling • Lead mission-level risk management, integration, verification and validation • Run design trade-offs across spacecraft systems, coverage and access, SAR payload, SAR processor and end-user applications • Own the SAR side of commissioning, calibration and early operations • Advise senior management and new business; mentor the team What you need • Graduate degree in Electrical Engineering, Engineering Physics, Math or Physics (or equivalent experience) • 15+ years with radar, SAR or similar active imaging systems (hardware, processors and/or data products) • 10+ years in a space systems engineering or similar complex systems environment • SAR remote sensing experience: system design, operation, applications/exploitation and/or calibration • Strong communicator across technical, sales, executive and customer audiences • US citizen or permanent resident (export-control and Controlled Goods requirements) Nice to have : MATLAB, Python; satellite SAR payload design and operations; space mission design (coverage and access, orbital dynamics); spacecraft design (thermal, power, pointing); geospatial data.

Location: Freeport, United States About the Opportunity We are seeking an experienced, results-driven Operations Manager / Project Manager to take full ownership of commercial concrete restoration, waterproofing, and exterior building envelope repair projects. This is an active, on-site field leadership position. You will oversee projects from initial preplanning and scheduling through execution, financial tracking, and final closeout. As a core member of the management team, you will be accountable for field results. You will directly manage multi-faceted project sequences and lead up to 20+ field personnel and site leads. If you are a disciplined construction professional who thrives on hands-on coordination, real-time decision-making, and strong quality control, we want you on our team! Key Responsibilities Preplanning & Setup: Review contracts, drawings, and specifications. Perform structural and architectural plan reading. Build, update, distribute, and drive project schedules using Microsoft Project. Set up, manage, and ensure project documentation in Procore. Plan labor, material, equipment, and sequencing. Lead meetings, organize activities, and report project progress to stakeholders. Work in Place (Execution): Manage, assign, and guarantee day-to-day field operations and work-in-place activities. Responsible to make sure that the delivery of concrete restoration work is completed in alignment with plans and specifications. Plan, adapt, and drive daily schedules accounting for delays, weather, trade coordination needs, or changes. Enforce strong QA/QC processes with in-progress inspections. Resource & Labor Management: Manage and report labor productivity, onsite material handling, storage, and utilization. Manage equipment rentals. Directly lead, mentor, and coordinate a field workforce of 20+ leads and personnel. Financial & Contract Management: Track budgets, costs, and forecasts. Manage change orders and pay applications. Ensure compliance with contract requirements. Maintain accurate reporting and cost controls. Project Closeout: Drive punch list completion and final inspections. Deliver closeout documents and warranties. Finalize project financials and reporting. Qualifications Experience: 5+ years of progressive experience managing commercial concrete restoration, waterproofing, or building envelope projects. Leadership: Proven track record leading self-performing, hands-on field teams and managing 20+ field personnel and key leads. Technical Skills: Advanced proficiency in reading and interpreting structural and architectural plans. Strong understanding of construction budgets, cost controls, and contract management. Software: Proficiency in Microsoft Project, Excel, Word, Outlook, and Procore. Languages: Bilingual (English/Spanish) is highly preferred. WHY APPLY? True Project Ownership: You aren't just sitting behind a desk. This role gives you the autonomy to drive high-impact, multi-faceted commercial restoration projects from the initial planning stages all the way to the final handshake. Direct Seat at the Table: As a vital member of the management team, your field expertise directly influences company operations, strategic scheduling, and project execution models. Stability & Specialization: Step into a specialized market sector (concrete restoration and building envelopes) where high-quality field leadership is highly valued and continually in demand. Dynamic Work Environment: Work with a team-first, disciplined organization that prioritizes proactive quality control, strong field support, and clear stakeholder communication.

Location: Colombia; San Jose, Costa Rica; Buenos Aires, Argentina; Tegucigalpa, Honduras; Mexico About the Role Want a role where you actually learn skills that matter? At H!KINEX, we help motivated people build real-world sales and communication skills while working with U.S.-based businesses. You don’t need sales experience - we’ll train you. What we’re looking for is curiosity, confidence, and the willingness to hear “no” and keep improving. As a Sales Account Executive, you’ll handle outbound calls, book meetings, and support early sales conversations. You’ll work closely with U.S. leaders, learn how professional sales works, and gain experience that builds confidence fast. This role is for people who want to grow, try something challenging, and build skills they can actually use long-term. Why You’ll Love Working Here You’ll get r eal training and mentorship , not just instructions You’ll work with U.S. companies and leaders, not simulated tasks You’ll build confidence in communication, persuasion, and professionalism You’ll see clear growth if you perform well You’ll be part of a team that supports learning, not perfection What You’ll Be Doing Make outbound and cold calls to start real conversations and book discovery or intro calls Use prospecting tools to find potential clients and set meetings with the right people Help build the sales pipeline by booking high-quality meetings for sales managers Learn how to clearly explain what we offer, understand what prospects need, and decide if it’s a good fit Work closely with sales, marketing, and support teams to test new messaging, campaigns, and outreach ideas Follow clear processes and standards so everyone stays aligned Jump in on special projects or new initiatives as the team grows—this role evolves with you What We’re Looking For Strong English communication skills and good comprehension No sales experience required - we’ll train you, as long as you understand what sales is and are comfortable making cold calls Willingness to hear “no,” learn from it, and keep improving Experience with outbound calls or U.S. clients is a plus, but not required Clear, confident communication with minimal filler words Ready to Apply? If you’re confident in English, open to learning, and excited to build real skills while working with U.S.-based teams, we’d love to hear from you. At H!KINEX, you’ll find a supportive, growth-focused environment where effort is noticed, feedback is real, and development actually happens. All while working remotely and collaborating with experienced leaders. Salary: $800 – $1,500 / month

Location: Canada; United States Role overview: We are seeking a System Engineer to perform design, integration, verification, and operational support of TT&C/PDT subsystems for current and next-generation remote sensing and communications satellites. The role will interface with spacecraft payload teams, ground-segment developers, and mission-operations teams to ensure reliable command delivery, high-fidelity telemetry acquisition, and robust data handling throughout the satellite life-cycle. Tasks summary: Architecture Concept & Requirements • Define TT&C/PDT functional architecture (command generation, uplink, telemetry downlink, on‑board data handling, RF front‑end). • Conduct trade‑studies for modulation schemes, coding, frequency plans, ranging and link budgets. • Produce System Requirements, Interface Control (ICDs), and Description documents. • Perform requirement management and maintain bidirectional traceability throughout the project lifecycle. • Collaborate with cyber-security to embed resilience and security by design. Design & Development • Lead detailed design of hardware (TT&C transceiver, RF front‑ends, antenna‑pointing) and software (command sequencer, telemetry parser, health‑monitoring). • Perform link‑budget analysis, RF simulation (e.g., STK, Matlab), and error‑budget budgeting. • Verify compliance with CCSDS, ECSS, ITU, and regulatory standards. • Support Satellite Reference Database development and validation Cross‑Functional Coordination, Stakeholder & Program Interaction • Present technical status, risk analyses, and trade‑study results to senior management. • Negotiate and maintain ICDs and interface agreements with internal & external suppliers. • Support B&P (Phase 0 & pre-Phase A). Integration & Verification (IVV) • Develop test plans, procedures, and verification matrices for unit, subsystem, and spacecraft‑level TT&C tests. • Execute RF link testing, BER, command latency, and telemetry integrity verification. • Manage anomaly investigation, root‑cause analysis, and corrective actions. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns. • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to client’s knowledge‑base, process enhancements, and standards. Configuration, Documentation & Standards Management • Ensure all artefacts, analysis, software, deliverables and documentations are version controlled in PLM environment. • Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation On‑Orbit & Operations Support • Support launch‑pre‑launch and early‑orbit checkout – validate command uplink, telemetry acquisition, and on‑board software hand‑over. • Provide real‑time C&T support during nominal and contingency operations. • Maintain ground‑segment configuration (gateways, mission control servers, monitoring dashboards). • Support SOOH development and associated operator trainings. Required Qualifications: • B.Sc. in Electrical Engineering, Aerospace or related field with 8+ years of TT&C/PDT System design experience on LEO/MEO/GEO platforms. • Strong knowledge of CCSDS TM/TC packet standards, ECSS telemetry & command protocols, PUS services and ITU frequency regulations. • Proficiency in RF link-budget analysis, S-band/X-band/Ka-band modem architecture. • Strong understanding of aerospace system engineering fundamentals, space environment and orbit mechanics. • Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. • Experience with Confluence and JIRA. • Demonstrated capability to efficiently work with little supervision. • Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. • Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Montreal, Canada Key Responsibilities: Lead the development and execution of advanced orbit dynamics and mission analysis tasks for various space missions. Architect, design, and optimize complex satellite trajectories, maneuvers (low-thrust, impulsive), and constellation configurations using STK (including modules like Astrogator, Optimizer, Analysis Workbench) and custom tools. Develop, implement, and validate high-fidelity simulation models and analysis software using Python, MATLAB, and/or C# to support mission design, performance assessment, and trade studies. Perform and oversee specialized analyses: advanced coverage, communications link budgets, conjunction assessment and collision avoidance strategies, re-entry predictions, orbit determination, and attitude dynamics interactions. Define mission requirements related to trajectory and orbital performance; contribute to system architecture development and trade-offs. Develop novel analysis techniques and automate complex simulation workflows. Provide technical leadership and mentorship to junior engineers within the team. Prepare and present detailed technical reports, analysis results, and recommendations to internal teams, management, and external customers/stakeholders. Interface with other subsystems (GNC, Systems, Software, Operations) to ensure mission success. Required Qualifications: Master's degree in Aerospace Engineering, Astronautical Engineering, Physics, Applied Mathematics, or a closely related field; Or a Bachelor's degree with significant additional relevant experience (typically 9+ years). Minimum of seven (7) years of professional, post-graduation experience directly related to orbit dynamics, astrodynamics, trajectory optimization, and space mission design and analysis. Expert-level proficiency with Systems Tool Kit (STK) / Satellite Tool Kit (STK), including advanced modules (e.g., Astrogator, Optimizer, Coverage, Comm) and experience with STK automation/scripting (via API, Connect). Advanced programming proficiency and demonstrated experience developing analysis tools, models, or simulations in Python and MATLAB. In-depth theoretical and practical understanding of advanced orbital mechanics, perturbation theory, estimation techniques (orbit determination), and trajectory optimization methods (gradient-based, evolutionary). Proven ability to lead technical analyses, conduct complex trade studies, and solve challenging astrodynamics problems independently. Excellent analytical, critical thinking, and problem-solving skills. Strong written and verbal communication skills in English. French language is considered favorably. Complementary skills/knowledge : PhD in Aerospace Engineering or a closely related field with a focus on astrodynamics or orbital mechanics. Experience with other simulation environments (GMAT, FreeFlyer, Orekit) or specialized tools (SPICE). Experience with C/C++ programming. Experience in spacecraft Guidance, Navigation, and Control (GNC) analysis or design. Experience with multi-body dynamics and large constellations. Experience with satellite operations, particularly flight dynamics aspects. Experience with software development best practices (version control with Git, testing, documentation, CI/CD). Record of publications or conference presentations in relevant fields.

Location: Canada Role overview: We are seeking a Spacecraft EMC Systems Engineer for its high-performance spacecraft for our remote sensing and communications satellites. The Spacecraft EMC Systems Engineer will own the EMC concept, analysis, verification and mitigation for multiple satellite programmes, driving architecture decisions, leading cross-disciplinary teams. He will ensure all electrical-subsystem on the bus and payload, from requirements capture to hardware design, do not interfere with themselves or launch vehicles. The role works closely with platform and payload teams to ensure an electrically clean, reliable and launch-ready spacecraft. Tasks summary: EMC Architecture Concept & Requirements • Capture, allocate and trace EMC functional, performance, and requirements. • Define the EMC architecture (shielding strategy, grounding scheme, antenna placement, mode-control, and harness segregation requirements & routing constraints). EMC Analysis & Electrical Design • Perform EMC analyses of the whole spacecraft (accounting for the payload specifics) for radiated/conducted emission and susceptibility, antenna coupling, shielding effectiveness, fuse blowing…etc. and verify compliance early in the design cycle. • Recommend mitigation such as shielding, filtering, grounding schemes, layout rules. DC Power Distribution • Review DC power distribution architecture (primary bus, secondary bus lines, converters, fusing, protection) for EMC/EMI aspects. • Review conductors, termination, connectors and back shells (material, gauge, shielding…etc.) that satisfy EMI control requirements. Cross‑Functional Coordination, Stakeholder & Program Interaction • Communicate technical status, risk assessments and trade‑study results to senior management and/or customers or partners. • Support ICDs with payload and platform teams and suppliers. • Act as the EMC authority in System and subsystem design reviews • Liaise with RF, Power, Structures, Propulsion, Software and Ground-Segment teams to resolve cross-disciplinary EMC issues early. • Support B&P (Phase 0 & pre-Phase A). Integration & Verification (IVV) • Author the EMC Verification Master Plan covering component level, subsystem level and full spacecraft tests (CE/CS, RE/RS). • Oversee test-facility set-up, instrumentation calibration, test execution, data reduction and results certification. • Author test procedures, and acceptance criteria. • Lead CE/CS tests, RE/RS tests on hardware and review suppliers test results. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns and provide EMC training sessions. • Act as technical liaison with customers, partners and external vendors. • Act as Continuous Improvement stakeholder. • Contribute to Client’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Participate in Change Control Boards (CCB) and ensure impact analyses are performed for any electrical change. • Maintain GDIR and EDTS streamlining. • Ensure all artefacts, analysis and documentations are version controlled in PLM environment. • Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation. On‑Orbit & Operations Support • Support root‑cause investigations for on‑orbit anomalies; update design baselines and lessons‑learned. • Support SOOH development and associated operator training. Required Qualifications: • B.Sc. in Electrical Engineering, Aerospace or Physics, (M.Sc. preferred) with 10 + years of electrical design engineering experience on LEO/MEO/GEO missions. • Proficiency in spacecraft and unit EMC requirements and simulations. • Prior experience supervising a team of EMC engineers or leading multi-disciplinary task-forces. • Strong understanding of aerospace system engineering fundamentals • Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. • Experience with Confluence and JIRA. • Demonstrated capability to efficiently work with little to no supervision. • Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. • Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Canada Role overview: We are seeking an experienced Electrical Power System Engineer to support the concept, detailed design, analysis, verification and integration of electrical power subsystems (solar arrays, power-conditioning units, batteries, distribution & regulation) for our current and next-generation remote sensing and communications satellites. The role works closely with payload, bus, thermal, structural and mission-systems multidisciplinary teams responsible for delivering high-performance, reliable EPS solutions to commercial, government, and defense customers. Tasks summary: Architecture Concept & Requirements • Define EPS architecture (generation, storage, distribution) that satisfies mission power budget, mass, volume and reliability constraints. • Perform trade-studies (e.g., solar cell type, battery chemistry, regulator topology). • Generate system requirements, functional flow block diagrams. • Develop the Interface Control Documents (ICD) and Design Description. • Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Detailed Design & Analysis • Size solar arrays, power-conditioning units, battery packs, and power distribution units. • Build and validate high-fidelity electrical models for satellite modes, FMECA, Fault detection… • Conduct & maintain power budget models, load-flow, thermal-power coupling, and survivability analyses (e.g., eclipse, safe-mode, fault-tolerant). Cross‑Functional Coordination, Stakeholder & Program Interaction • Present technical status, risk analyses, and trade‑study results to senior management. • Interface with spacecraft bus teams (power, thermal, structure, avionics). • Develop/maintain high-fidelity power models for mission analysis (e.g., orbit raising, station-keeping, de-orbit). • Develop tools for power efficiency & optimisation for the satellite. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Author verification plans, test matrices, and validation procedures for unit & EPS subsystem tests. • Support ground-test & integration campaigns, fueling, thermal vacuum, EMI/EMC, and spacecraft-level integration. • Analyse test data, close out anomalies, and update design baselines. • Support FSW integration Technical Leadership & Mentorship • Mentor, guide, lead a multidisciplinary team of junior or intermediate system engineers & interns • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to Client's knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Maintain design and safety standards. • Ensure all artefacts, analysis, software, documentations and deliverables are version controlled in PLM environment. • Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation Launch‑Site, On‑Orbit & Operations Support • Support launch‑site interface checklists with LVI responsible engineer, pre‑launch checkout procedures, and early‑orbit checkout scripts. • Provide real‑time engineering support during launch, on‑orbit commissioning, anomaly investigations and contingency operations. • Support SOOH development and associated operator trainings. Required Qualifications: • B.Sc. in Electrical Engineering, Aerospace or Physics with 8 + years of EPS system design experience on LEO/MEO platforms. • Deep knowledge of spacecraft bus subsystems and their interactions. • Experience with power‑electronics design and power management hardware. • Strong understanding of aerospace system engineering fundamentals • Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. • Experience with Confluence and JIRA • Demonstrated capability to efficiently work with little supervision • Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. • Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Canada Role overview: We are seeking a GNC System Engineer for design, integration, verification, and operational support of GNC subsystems for our current and next-generation remote sensing and communications satellites. The role will require to design the complete subsystem, from algorithm development through hardware implementation, verification, and on‑orbit operation support. The role requires deep expertise in orbital dynamics, attitude‑determination & control, plus real‑time FSW definition and integration, and will work closely with subsystem and mission operations teams throughout the satellite life-cycle. Tasks summary: Architecture Concept & Requirements • Derive GNC functional, performance, and safety requirements (pointing accuracy, slew rate, orbit‑maintenance ΔV, fault‑tolerance) from mission level requirements. • Produce System Requirements, Interface Control document (ICD), and Description Document. • Perform requirement management and maintain bidirectional traceability throughout the project lifecycle. Modelling & Trade‑Study • Conduct trade studies on sensor suites and actuator families. • Perform high‑fidelity dynamics simulations (Matlab/Simulink, STK) to meet pointing requirements, maintain error budgets, control‑law stability, fuel consumption, and survivability margins. Algorithm Development • Design and implement attitude‑determination algorithms and orbit‑determination solutions. • Develop control laws for 3‑axis stabilization, slew maneuvers, station keeping algorithms • Validate algorithms with Monte‑Carlo analysis, worst‑case scenarios, and support SIL/HIL testing on avionic test bench. Cross‑Functional Coordination, Stakeholder & Program Interaction • Translate algorithms into FSW requirements running on real‑time operating systems. • Collaborate with the C&DH and FSW teams to implement TM/TC, schedulers and FDIR logic for GNC. • Present technical status, risk analyses, and trade‑study results to senior management. • Negotiate and maintain ICDs with subsystems. • Support B&P (Phase 0 & pre-phase A). Hardware Selection & Design • Specify sensor and actuator hardware, perform interface definition (electrical, mechanical, thermal) and conduct trade on redundancy architectures. • Work with structures and thermal engineers to ensure proper mounting, thermal paths, and vibration survivability of GNC hardware aligning with payload requirements. • Review harness routing and power distribution for GNC electronics. Integration & Verification (IVV) • Author Verification Plans, Test Matrices, and Validation Procedures for unit, subsystem, and spacecraft level GNC tests. • Lead functional tests: sensor calibration, actuator command‑response, closed‑loop attitude‑control on testbeds, and on‑orbit checkout sequences. • Conduct failure mode and effects analysis (FMEA), fault tree analysis (FTA), and reliability prediction. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns. • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to Client’s knowledge‑base, process enhancements, and standards. Configuration, Documentation & Standards Management • Maintain GNC standards (sensor/actuator interface, filter design, control‑law documentation). • Ensure all artefacts, analysis, software, deliverables and documentations are version controlled in PLM environment. • Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation On‑Orbit & Operations Support • Support procedure developments (detumble, orbit‑maintenance, safe‑mode…etc.). • Provide real‑time GNC support during launch, early‑orbit checkout, and contingency events. • Analyse on‑orbit telemetry, update filter parameters, and generate performance reports. • Support SOOH development and associated operator training. Required Qualifications: • B.Sc. in Electrical Engineering, Aerospace or Physics, (M.Sc. preferred), focused on flight dynamics, control theory, or navigation with 10+ of GNC/AOCS experience on LEO/MEO/GEO platforms. • Orbital mechanics, attitude dynamics, and control-law design (classical and modern optimal control). • Proficiency with navigation sensors and actuators. • Experience implementing real-time filtering and control algorithms in embedded code • Strong understanding of aerospace system engineering fundamentals. • Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. • Experience with Confluence and JIRA. • Demonstrated capability to efficiently work with little supervision. • Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. • Demonstrate excellent written and verbal communications skills in English & French work environment.

Location: United States WHAT YOU'LL DO: Process shipping and receiving at the Santa Ana and/or Costa Mesa locations as needed Prepare finished stock for shipment by identifying, pulling, packing, crating, labeling, loading, and securing product Key person to ensure material movement across sites is accurately transacted for each move Ensure orderly production and distribution of products by pulling orders from inventory, delivering production materials and supplies where needed, and staging finished product for final distribution Complete cycle counts and conduct all warehouse activities with inventory accuracy as a top priority Maintain inventory by identifying, labeling, and keeping materials and supplies in stock, recording location of inventory, and reporting shortages Operate forklifts, pallet jacks, and other machinery to move items, or signal machine operators to move materials onto and off trucks and loading docks Courier inventory as needed between Client's sites in Santa Ana & Costa Mesa Expedite flow of material, parts, and assemblies within or between departments in accordance with production and shipping schedules REQUIRED QUALIFICATIONS: 2+ years as a warehouse associate or equivalent role Must be able to work 1st or 2nd shift and overtime as needed Valid driver's license Ability to be onsite, local to Santa Ana, CA or Costa Mesa, CA PREFERRED QUALIFICATIONS: 1+ years forklift experience and license Experience working in the defense/aerospace industry Familiarity with Enterprise Resource Planning (ERP) systems and/or other warehouse management and inventory control tooling. Familiarity with Microsoft Office or equivalent office management tooling Familiarity with Inventory Management through lot/serial/batch tracking Experience packaging and handling hazardous shipments Excellent customer service skills Able to adapt in fast-paced environments Ability to flex as work shifts can be subject to change depending on the business need Ability to prioritize tasks efficiently and effectively Eligibility to obtain and maintain a U.S. clearance Active secret or top secret clearance within the last 5 years

Location: United States Location: Bellevue, Washington, hybrid, 3 days per week on-site. Duration: 6-month W-2 contract with possibility of conversion to full time. About the role: This is an embedded firmware role, not application software. Bare-PCB bring-up to production firmware on 32-bit ARM Cortex-M microcontrollers, in embedded C . The product is built around USB-C Power Delivery controllers . Candidates must understand USB-C / USB-PD: source, sink and dual-role, power contract negotiation, fault handling. Hands-on bench work is mandatory: oscilloscope, logic or protocol analyzer, SWD/JTAG debugger, UART logging, working from datasheets, register tables and schematics. Companion-IC communication over I2C, SPI, UART . Strong plus: Infineon EZ-PD / PMG1 or Cypress CCGx PD controllers, ModusToolbox or STM32Cube, bootloader / DFU work, power-path or regulator firmware (VBUS, OVP/UVP/OCP), USB hubs, DisplayPort Alt Mode, redrivers. Role Description We're bringing up new hardware built around USB-C Power Delivery controllers and are looking for an embedded firmware engineer to help take these boards from bare PCB to working, production-quality firmware. You'll write and debug firmware on 32-bit ARM microcontrollers, configure companion ICs over I2C/SPI/UART, and work hands-on at the bench in collaboration with our hardware team. Job Responsibilities Bring up new PCBs: validate power/clocks, connect a debugger, enable peripherals, and get firmware running on new hardware Develop and debug embedded C firmware on ARM Cortex-M-class MCUs Configure and drive companion ICs over I2C or other peripheral buses Implement and debug USB-C / USB-PD behavior (power negotiation, source/sink roles, fault handling, etc.) Debug at the bench with oscilloscope, protocol/logic analyzer, multimeter, and SWD/JTAG Work from datasheets, register tables, and schematics Document configurations and design decisions Collaborate with hardware engineers to isolate hardware vs. firmware issues Required Skills Strong embedded C on 32-bit MCUs (ARM Cortex-M or similar): interrupts, register-level peripheral work, development under flash/RAM constraints Working understanding of USB-C/USB-PD (source/sink/DRP roles, power contract negotiation) I2C/SPI/UART peripheral/companion-IC communication, configuration, and debug Hands-on hardware bring-up experience: taking a board from power-on to running firmware, or debugging firmware against real hardware Datasheet and schematic literacy: able to configure a part from its register tables and confirm pin/power connections Comfortable with standard bench debug tools: oscilloscope, logic/protocol analyzer, SWD/JTAG debugger, UART logging Git proficiency Preferred Skills Experience with a Cypress/Infineon MCU SDK/IDE and its middleware (e.g. ModusToolbox, STM32Cube, or similar), including creating/customizing a board support package Firmware update/bootloader work (DFU or equivalent): building and flashing update images Power-path or regulator firmware: VBUS control, fault detection/recovery (OVP/UVP/OCP), enable/soft-start sequencing USB subsystem experience: hubs, DisplayPort Alt Mode, redrivers/retimers, or billboard devices Nice to have Prior work with Infineon EZ-PD / PMG1 (or Cypress CCGx) PD controllers and ModusToolbox CI for embedded builds USB-IF PD compliance/USB-C requirements familiarity

Location: Costa Mesa, United States; Santa Ana, United States 📍 Location: Santa Ana / Costa Mesa, CA 📄 Employment Type: 6-Month Contract, with potential for conversion to full-time 🏢 Work Arrangement: On-site 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Important Screening Requirements Must be a U.S. Citizen . Must have a valid driver's license . Must be able to work 1st or 2nd shift , including overtime as needed. Must be able to work on-site in Santa Ana or Costa Mesa, CA ; local candidates are preferred. Must be able to lift up to 50 lbs. Must be comfortable using a computer to enter inventory transactions and communicate through tools such as Slack . Must have proficient spoken and written English . Must be willing to work a flexible schedule , as shifts may change based on business needs. Must be eligible to obtain and maintain a U.S. security clearance ; an active Secret or Top Secret clearance within the last five years is preferred. About the Role We are seeking Materials Associates to join a high-volume warehouse and materials team supporting operations across the Santa Ana and Costa Mesa locations. This role is responsible for the movement, organization, tracking, and shipment of materials, parts, assemblies, and finished products. The ideal candidate is not simply an experienced warehouse operator but someone who is reliable, detail-oriented, curious, and comfortable identifying ways to improve processes . You will work across shipping and receiving, inventory control, material movement, production support, and warehouse operations while maintaining a strong focus on inventory accuracy and timely material flow . What We’re Looking For We’re looking for someone who can combine hands-on warehouse experience with strong attention to detail and critical thinking . Experience with inventory control, cycle counting, WMS/ERP systems, or lot/serial/batch tracking is highly valuable. The team values candidates who are adaptable, dependable, comfortable learning new systems, and willing to question and improve existing processes . Key Responsibilities Process shipping and receiving activities at the Santa Ana and/or Costa Mesa locations as needed. Prepare finished stock for shipment by: Identifying and pulling products Packing and crating materials Labeling shipments Loading and securing products Accurately transact the movement of materials between company sites. Pull orders from inventory and deliver production materials and supplies where needed. Stage finished products for final distribution. Complete cycle counts and other warehouse activities with inventory accuracy as a top priority. Maintain inventory by identifying and labeling materials and supplies. Record and maintain accurate inventory locations. Identify and report inventory shortages. Operate forklifts, pallet jacks, and other material-handling equipment as applicable. Move materials onto and off trucks and loading docks. Courier inventory between the Santa Ana and Costa Mesa locations as needed. Expedite the movement of materials, parts, and assemblies within or between departments based on production and shipping schedules. Support a fast-paced warehouse environment while maintaining accuracy, safety, and organization. Required Qualifications 2+ years of experience as a warehouse associate or in an equivalent role. Valid driver's license . Ability to work 1st or 2nd shift and overtime as needed. Ability to work on-site in Santa Ana or Costa Mesa, CA . Ability to lift up to 50 lbs. Comfortable working with computers and entering inventory transactions. Strong attention to detail and commitment to inventory accuracy. Strong communication and organizational skills. Ability to adapt to a fast-paced environment. Ability to prioritize tasks efficiently and effectively. Preferred Qualifications 1+ year of forklift experience and forklift certification/license. Experience working in the defense or aerospace industry . Experience with ERP systems, WMS, or inventory management platforms . Familiarity with Microsoft Office or similar productivity tools. Experience with lot, serial, or batch tracking . Experience packaging and handling hazardous shipments . Experience with inventory control and cycle counting. Excellent customer service and communication skills. Ability to identify opportunities to improve warehouse and material-flow processes. Active Secret or Top Secret clearance within the last five years. Experience working in environments where priorities and work shifts may change based on business needs. Shift Information 1st Shift: 7:00 AM – 3:30 PM 2nd Shift: 3:00 PM – 11:30 PM 2nd shift is currently the greater need. A Tuesday–Saturday shift is expected to become available shortly. Candidates should be prepared to indicate their preferred shift during the screening process. Screening focus: In addition to warehouse experience, prioritize reliability, critical thinking, curiosity, inventory accuracy, adaptability, and willingness to improve processes .