Вакансии

Location: Torrance, United States 📍 Location: Torrance, CA 📄 Employment Type: Full-Time 🏢 Work Arrangement: 100% On-site, Monday–Friday 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Important Screening Requirements Bachelor’s degree in Electrical Engineering or a related field . Strong experience with complex digital or mixed-signal hardware design . Experience with high-speed digital systems, embedded processors, memory interfaces, and board-level architecture . Hands-on PCB design and hardware bring-up experience. Experience using oscilloscopes, logic analyzers, and power supplies . Experience with board validation, debugging, and root-cause analysis. Must be able to work on-site in Torrance, CA . U.S. work authorization and export-control eligibility requirements may apply. Ability to obtain and maintain applicable U.S. Government security clearance or authorization, if required. About the Role We are seeking experienced Avionics Hardware Engineers at the Senior and Staff levels to work on high-speed digital design, flight computer architecture, and advanced avionics hardware. This role is focused on complex embedded hardware for mission-critical systems, with ownership spanning architecture, board design, bring-up, validation, and integration . What We’re Looking For We’re looking for experienced hardware engineers who can take ownership of complex avionics hardware , solve challenging hardware problems in the lab, and work closely with multidisciplinary teams from architecture through integration. Key Responsibilities Design and develop advanced board-level electrical hardware, including: Schematic capture PCB layout oversight Component selection Interface definition Own high-speed digital and embedded flight computer architectures involving processors, memory systems, and board-level integration. Perform board bring-up, validation, debugging, and root-cause analysis in the lab. Test reference boards and early prototypes using standard laboratory equipment. Drive signal integrity, power integrity, and hardware reliability throughout the design lifecycle. Collaborate with avionics, embedded software, test, and manufacturing teams. Support hardware/software integration and troubleshooting across avionics platforms. Document designs, test results, and engineering changes. Required Qualifications Bachelor’s degree in Electrical Engineering or related field. Strong experience designing complex digital or mixed-signal hardware. High-speed digital systems experience. Experience with embedded processors, memory interfaces, and board-level architecture. Experience with PCB design tools; Altium preferred . Hands-on experience with oscilloscopes, logic analyzers, and power supplies. Strong understanding of digital systems, signal integrity, power distribution, and hardware debugging. Ability to work effectively in a fast-paced, highly collaborative environment. Preferred Qualifications Experience with flight computer, avionics, or embedded compute architectures . Experience taking complex PCBAs from concept through bring-up, validation, and integration. Exposure to embedded systems, firmware, or FPGA interaction. Experience in aerospace, automotive, robotics, defense, or other high-reliability hardware environments. Familiarity with Ethernet, SPI, I2C, UART, CAN, PCIe, or DDR memory systems . Basic scripting or programming experience using Python, C, or C++ .

Location: Torrance, United States 📍 Location: Torrance, CA 📄 Employment Type: Full-Time 🏢 Work Arrangement: 100% On-site, Monday–Friday 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Important Screening Requirements Bachelor’s degree in Electrical Engineering or a related field . End-to-end experience with avionics or high-reliability electronic hardware . Strong PCB design, bring-up, and laboratory debugging experience. Ability to independently drive hardware issues through resolution. Must be able to work on-site in Torrance, CA . U.S. work authorization and export-control eligibility requirements may apply. Ability to obtain and maintain applicable U.S. Government security clearance or authorization, if required. About the Role We are seeking an Avionics Hardware Engineer to own flight-critical electronics across design, bring-up, testing, and integration. The engineer may take ownership of areas such as motor controllers, avionics backplanes, power distribution, or outward-facing avionics test and integration . What We’re Looking For We’re looking for an engineer who can take ownership of flight-critical hardware , troubleshoot issues hands-on, and move designs efficiently from concept through testing and production. Key Responsibilities Own avionics hardware from architecture and schematic design through PCB layout, bring-up, and production support . Drive component selection, interface definition, and system-level tradeoffs. Lead hardware bring-up, debugging, and root-cause analysis across laboratory, integration, and flight-test environments. Collaborate with cross-functional teams to ensure hardware meets performance, reliability, and mission requirements. Define and execute hardware validation strategies appropriate to development and flight maturity. Prepare technical documentation covering designs, test results, and engineering changes. Partner with manufacturing teams and suppliers to transition hardware from prototype to production. Continuously improve designs based on test results, field data, and evolving requirements. Required Qualifications Bachelor’s degree in Electrical Engineering or related field. Proven end-to-end ownership of avionics or high-reliability electronic hardware . Strong PCB design experience. Hands-on hardware bring-up and laboratory debugging experience. Ability to work autonomously and drive hardware issues to closure. Preferred Qualifications Experience in avionics, aerospace, missile, space, automotive, or defense hardware . Experience with motor controllers, backplanes, power electronics, or flight hardware . Familiarity with MIL-STD or aerospace hardware standards, including DO-254 exposure. Embedded systems or FPGA-adjacent hardware experience. Experience supporting hardware through integration, testing, or flight environments.

Location: Costa Mesa, United States 📍 Location: Costa Mesa, California, USA 📄 Employment Type: Full-Time 🏢 Work Arrangement: Remote Opportunity 🚀 Start Date: Immediate 💰 Compensation: TBD -- based on skills and experience Important Screening Requirements Must be a U.S. Citizen or U.S. Permanent Resident (Green Card holder) . Must be eligible to obtain and maintain a U.S. Department of Defense (DoD) Secret Security Clearance . Candidates should have a strong interest in supporting U.S. defense and national security programs. About the Role We are seeking an Aerodynamics Engineer to support the design, analysis, and testing of next-generation air vehicle platforms. In this role, you will perform aerodynamic modeling, aircraft performance analysis, and wind tunnel and flight testing to optimize vehicle performance from concept through flight validation. The ideal candidate has a strong foundation in aerodynamics, computational analysis, and flight testing, with experience developing innovative solutions for advanced aerospace systems. Key Responsibilities Perform aerodynamic analyses to support the design and optimization of advanced air vehicle platforms. Develop aircraft performance predictions using analytical methods and Computational Fluid Dynamics (CFD). Conduct aerodynamic evaluations using hand calculations, vortex lattice methods, panel methods, and CFD. Support wind tunnel and flight test campaigns, including test planning, data acquisition, data analysis, and project coordination. Develop and maintain engineering analysis tools using MATLAB , Python , or similar programming languages. Analyze aerodynamic performance data and recommend design improvements. Prepare technical documentation, including specifications, test procedures, engineering reports, and design analyses. Collaborate with multidisciplinary engineering teams throughout the design, integration, testing, and development lifecycle. Required Qualifications Bachelor's degree or higher in Aerospace Engineering . 3+ years of experience as an individual contributor in an aerospace engineering role. Experience with aircraft performance analysis and aerodynamic prediction. Strong experience with: Hand calculations Vortex lattice methods Panel methods Computational Fluid Dynamics (CFD) Experience supporting wind tunnel and flight testing, including data acquisition, analysis, and project coordination. Strong programming skills using MATLAB , Python , or similar high-level programming languages within a version-controlled development environment. Experience preparing technical documentation, including specifications, test procedures, and engineering reports. Strong analytical, communication, and problem-solving skills. Preferred Qualifications Experience with StarCCM+ . Experience with ice accretion or aircraft icing analysis . Experience using Missile DATCOM , OTIS , or DYMOS . Experience working with transonic and supersonic flow regimes. Active U.S. DoD Secret Security Clearance .

Location: Torrance, United States As a Senior Thermal Engineer, you will own the thermal engineering methodology across our missile systems. You will define thermal architectures, develop high-fidelity thermal models, and use first-principles analysis, simulation, and hardware testing to ensure our vehicles perform reliably in some of the most demanding thermal environments imaginable. You'll work across aerodynamics, structures, electrical, propulsion, systems, manufacturing, and test engineering to develop integrated thermal solutions from concept through flight. Your work will span transient mission analysis, electronic unit thermal management, specialized ground testing, and flight-test instrumentation and data analysis. This role is ideal for an engineer who enjoys moving fluidly between analytical models, real hardware, and flight data—and who wants to directly influence vehicle architecture and design decisions from day one. RESPONSIBILITIES Thermal design and analysis of unmanned air vehicles at conceptual, preliminary, and detailed design maturities Define thermal system architectures and material selection strategies for vehicles operating in demanding flight environments Thermal analysis of flight vehicles using standard thermal analysis codes and engineering/hand methods Transient thermal analysis for time-varying mission profiles Ground test planning, execution, and analysis in specialized thermal test facilities Flight test planning, execution, and post-flight thermal data analysis Use first principles and MATLAB/Python models to inform design decisions Collaborate with aerodynamics, structures, electrical, and systems engineers on integrated solutions Present thermal status at formal reviews internally and with customers Prepare formal documentation (specifications, test procedures, technical reports) BASIC QUALIFICATIONS BS or higher degree in Aerospace Engineering, Mechanical Engineering, or Applied Physics In-depth understanding of heat transfer, fluid dynamics, and high-temperature environments 5+ years of experience in aerospace thermal engineering on rocket, spacecraft, aircraft, or missile programs Experience with electronic unit thermal analysis and control to component junctions Ground testing experience with thermal instrumentation and data acquisition Strong programming skills in MATLAB, Python, or similar for tool development Experience preparing formal documentation CAD experience with SolidWorks or Siemens NX Ability to obtain and hold a U.S. security clearance PREFERRED SKILLS AND EXPERIENCE MS or higher degree in Aerospace Engineering, Mechanical Engineering, or Applied Physics with focus on heat transfer and fluid dynamics Experience with material ablation response modeling in extreme thermal environments Knowledge of material degradation and surface phenomena under demanding conditions Experience with specialized thermal ground test facilities Flight test experience including instrumentation design and post-flight analysis Experience with Thermal Desktop/SINDA Experience with manufacturing and assembly of thermal systems Active U.S. security clearance

Location: Torrance, United States As a Flight Software Engineer, you will play a key role in designing, developing, and testing flight software that powers these advanced systems. You'll work closely with multidisciplinary teams to deliver high-performance, real-time embedded software that operates reliably under extreme conditions. This is a hands-on role for an engineer who thrives on solving hard problems, building robust systems from the ground up, and moving fast without compromising quality. RESPONSIBILITIES Design, develop, and test real-time embedded flight software for missile systems Collaborate with GNC engineers, systems engineers, and hardware teams to ensure seamless integration Implement and maintain software for high-reliability, safety-critical environments Support simulation, hardware-in-the-loop (HIL), and flight testing to validate performance Participate in root cause analysis and debugging across software and system interfaces Follow rigorous software lifecycle practices, including configuration management and verification Contribute to defining and improving development processes, tools, and standards Stay informed on emerging technologies and best practices relevant to flight software and real-time systems BASIC QUALIFICATIONS Bachelors or Master's degree in Computer Science, Electrical Engineering, Aerospace Engineering, or related field Experience: Open to candidates across all experience levels, from early-career engineers to senior technical contributors. Professional experience, internships, research, open-source contributions, or other hands-on technical work will be considered. Proficiency in C/C++ and experience with real-time operating systems (RTOS) Familiarity with hardware/software integration and real-time system constraints Experience working with GNC systems or similar control-intensive applications Strong understanding of testing practices including simulation and HIL environments Excellent problem-solving skills and attention to detail Ability to work effectively in a fast-paced, multidisciplinary team environment Active or eligible for a Top-Secret security clearance PREFERRED SKILSS AND EXPERIENCE Experience developing flight software for missile, launch vehicle, or spacecraft systems Exposure to FPGA-based systems and embedded software optimization techniques Knowledge of secure software development and cybersecurity best practices Familiarity with agile or iterative development methodologies Hands-on experience with software verification, validation, and integration in defense environments

Location: Torrance, United States As an Embedded Software Engineer you will be at the forefront of creating, developing, and testing the software that drives and simulates our flight systems. Your role involves close collaboration with fellow Client's engineers across software and hardware domains to implement and debug software across the entire technology stack from applications and operating systems to networking, firmware, and simulation, ensuring complete mission success. We seek intelligent, collaborative, an driven engineers of all levels who are passionate about problem-solving and eager to contribute to an extraordinary mission. If you thrive in challenging environments and are excited by the prospect of making a tangible impact, we want to hear from you. RESPONSIBILITIES Autonomous Systems: Design and implement reliable autonomous software systems, along with the simulations required to validate their precision and dependability. Comprehensive Software Development: Manage the entire software development process, from initial design, prototyping, and testing, to final integration and deployment for mission-critical applications. System Testing: Evaluate test outcomes and troubleshoot issues necessitating detailed investigations, including hands-on integration and debugging of hardware/software systems. Develop tools to facilitate testing across various environments: virtualized hardware, real hardware-in-the-loop, and vehicle-in-the-loop testing. COLLABORATION Partner with multidisciplinary engineering teams to brainstorm, design, and develop next-generation hypersonic missile capabilities, including advanced guidance algorithms and integrated seeker image processing. Project Leadership: Lead major projects that propel Client's mission forward, ensuring alignment with overall objectives and occasionally traveling to launch and customer sites for testing and operations. Enhance Standards and Practices: Continuously improve software standards and best practices within the software team, fostering an environment of ongoing improvement and innovation. BASIC QUALIFICATIONS Educational Background: Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering, Mathematics, or a related STEM field, or equivalent practical experience. Experience: Open to candidates across all experience levels, from early-career engineers to senior technical contributors. Professional experience, internships, research, open-source contributions, or other hands-on technical work will be considered. Technical Proficiency: Experience with systems programming in languages such as C++, Python, or Rust, and familiarity with Linux-based development environments. Experience may include work with low-level systems such as Linux kernel development, hardware interfaces, or driver development (e.g., UART, I2C, or similar peripherals). PREFERRED SKILLS AND EXPERIENCE Programming Expertise : Proven proficiency in C++, Rust, or similar systems programming languages. System Experience: Practical experience with real-time embedded systems or distributed computing environments in Linux-based systems, including developing high-quality Linux-based C++ software for common processors and microcontrollers (e.g., PowerPC, x86, ARM). TECHNICAL SKILLS Proficiency in Linux, including Bash shell scripting, network troubleshooting, and performance analysis (strace, ftrace, etc.), with strong skills in debugging, performance optimization, and unit testing. System Knowledge: Comprehensive understanding of computer architecture and networking protocols (TCP, UDP, etc.). Problem-Solving: Innovative problem-solving approach using first-principles thinking, including developing prototypes to validate key design concepts and quantify technical constraints.

Location: Torrance, United States 📍 Location: Torrance, CA 📄 Employment Type: Full-Time 🏢 Work Arrangement: 100% On-site, Monday–Friday 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Important Screening Requirements Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, Mathematics, or a related STEM field , or equivalent practical experience. Open to candidates across experience levels, including early-career engineers and senior technical contributors . Experience with systems programming using C++, Python, Rust, or similar languages . Familiarity with Linux-based development . Experience with low-level systems, hardware interfaces, or embedded software. Must be able to work on-site in Torrance, CA . U.S. work authorization and export-control eligibility requirements may apply. Security clearance or other U.S. Government authorization may be required depending on the position. Embedded Software Engineer- JD About the Role We are seeking Embedded Software Engineers to develop, test, and integrate software that drives and simulates advanced flight systems. The role spans multiple layers of the technology stack, including applications, operating systems, networking, firmware, and simulation . Engineers will work closely with hardware and software teams to build and debug mission-critical systems. Embedded Software Engineer- JD What We’re Looking For We’re looking for engineers at all experience levels who enjoy working close to the hardware , solving difficult systems problems, and building reliable software for complex flight systems. Embedded Software Engineer- JD Key Responsibilities Design and implement reliable autonomous software systems. Develop simulations used to validate software precision and system dependability. Participate throughout the software development lifecycle, from design and prototyping through testing, integration, and deployment . Evaluate test results and troubleshoot complex hardware/software issues. Perform hands-on integration and debugging across software and hardware systems. Develop tools supporting virtualized hardware, hardware-in-the-loop, and vehicle-in-the-loop testing . Collaborate with multidisciplinary engineering teams on advanced flight-system capabilities. Contribute to guidance algorithms and integrated seeker image-processing efforts. Lead major software projects when appropriate. Support testing and operations at launch or customer sites when required. Improve software standards, development practices, and engineering processes. Embedded Software Engineer- JD Required Qualifications Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, Mathematics, or related STEM field, or equivalent practical experience. Experience with systems programming in C++, Python, Rust, or similar languages . Familiarity with Linux-based development. Understanding of low-level systems programming and hardware interfaces. Experience with interfaces such as UART and I2C is valuable. Strong problem-solving and debugging skills. Ability to work effectively in a multidisciplinary engineering environment. Embedded Software Engineer- JD Preferred Qualifications Strong C++ or Rust experience. Real-time embedded or distributed computing experience. Experience with Linux systems. Experience working with PowerPC, x86, ARM, or similar architectures . Bash, networking, and performance-analysis tools. Experience with debugging, performance optimization, and unit testing. Knowledge of TCP/UDP networking . Experience building prototypes from first principles. Embedded Software Engineer- JD

Location: Torrance, United States We are hiring Avionics Hardware Engineers to own flight critical electronics across design, bring up, test, and integration. This role is intended for engineers with experience in complex electronic systems who can take responsibility for avionics subsystems and operate effectively in a hightempo development environment. Engineers in this role may own areas such as motor controllers, avionics backplanes, power distribution, or outward facing avionics test and integration. RESPONSIBILITIES Own avionics hardware from architecture and schematic design through PCB layout, bring-up, and production support Drive design decisions including component selection, interfaces, and system tradeoffs Lead hardware bring-up, debugging, and root-cause analysis across lab, integration, and flight test Collaborate cross-functionally to ensure avionics hardware meets performance, reliability, and mission requirements Define and execute hardware validation strategies appropriate to development and flight maturity Produce clear technical documentation covering designs, test results, and engineering changes Partner with manufacturing and suppliers to transition hardware from prototype to production Continuously improve designs based on test results, field data, and evolving requirements BASIC QUALIFICATIONS Bachelor's degree in electrical engineering or related field Proven end-to-end ownership of avionics or highnreliability electronic hardware Strong experience with PCB design, bringnup, and lab debugging Ability to operate autonomously and drive hardware issues to closure PREFERRED QUALIFICATIONS Avionics, aerospace, missile, space, automotive, or defense hardware experience Experience with motor controllers, backplanes, power electronics, or flight hardware Familiarity with MILnSTD or aerospace hardware standards (e.g., DOn254 exposure) Embedded systems or FPGAnadjacent hardware experience Experience supporting hardware in integration, test, or flight environments

Location: Torrance, United States We are hiring experienced Avionics Hardware Engineers to specialize in high-speed digital design, flight computer architecture, and advanced avionics hardware development across our avionics organization. This role is ideal for engineers with deep EE fundamentals and hands-on ownership experience designing complex embedded hardware for mission-critical systems. Engineers in this role focus on flight computer architecture, high-speed digital board design, system bring-up, and hardware validation across real flight hardware. The ideal candidate has experience owning complex board designs from architecture through integration and thrives in fast-paced hardware development environments. RESPONSIBILITIES Design and develop advanced board-level electrical hardware including schematic capture, PCB layout oversight, component selection, and interface definition. Own high-speed digital and embedded flight computer architectures including processors, memory systems, and board-level integration Perform board bring-up, validation, debugging, and root-cause analysis in the lab Test reference boards and early prototypes using standard lab equipment Drive signal integrity, power integrity, and hardware reliability considerations throughout the design lifecycle Work with avionics, embedded software, test, and manufacturing teams to iterate designs quickly Support hardware/software integration and troubleshooting across avionics platforms Document designs, test results, and engineering changes clearly BASIC QUALIFICATIONS Bachelor's degree in electrical engineering or related field Strong experience with complex digital or mixed-signal hardware design Experience with high-speed digital systems, embedded processors, memory interfaces, and board-level architecture Experience with PCB design tools (Altium preferred) Hands-on experience with oscilloscopes, logic analyzers, and power supplies Strong understanding of core EE principles including digital systems, signal integrity, power distribution, and hardware debugging Comfortable working in a fast-paced, highly collaborative environment PREFERRED QUALIFICATIONS Experience owning flight computer, avionics, or embedded compute hardware architectures Experience taking complex PCBAs from concept through bring-up, validation, and integration Exposure to embedded systems, firmware, or FPGA interaction Familiarity with aerospace, automotive, robotics, defense, or other high-reliability hardware environments Familiarity with interfaces such as Ethernet, SPI, I2C, UART, CAN, PCIe, or DDR memory systems Basic scripting or programming experience (Python, C/C++)

Location: United States As a Senior Thermal Engineer, you will own the thermal engineering methodology across our missile systems. You will define thermal architectures, develop high-fidelity thermal models, and use first-principles analysis, simulation, and hardware testing to ensure our vehicles perform reliably in some of the most demanding thermal environments imaginable. You'll work across aerodynamics, structures, electrical, propulsion, systems, manufacturing, and test engineering to develop integrated thermal solutions from concept through flight. Your work will span transient mission analysis, electronic unit thermal management, specialized ground testing, and flight-test instrumentation and data analysis. This role is ideal for an engineer who enjoys moving fluidly between analytical models, real hardware, and flight data—and who wants to directly influence vehicle architecture and design decisions from day one. Responsibilities: Thermal design and analysis of unmanned air vehicles at conceptual, preliminary, and detailed design maturities Define thermal system architectures and material selection strategies for vehicles operating in demanding flight environments Thermal analysis of flight vehicles using standard thermal analysis codes and engineering/hand methods Transient thermal analysis for time-varying mission profiles Ground test planning, execution, and analysis in specialized thermal test facilities Flight test planning, execution, and post-flight thermal data analysis Use first principles and MATLAB/Python models to inform design decisions Collaborate with aerodynamics, structures, electrical, and systems engineers on integrated solutions Present thermal status at formal reviews internally and with customers Prepare formal documentation (specifications, test procedures, technical reports) Basic Qualifications: BS or higher degree in Aerospace Engineering, Mechanical Engineering, or Applied Physics In-depth understanding of heat transfer, fluid dynamics, and high-temperature environments 5+ years of experience in aerospace thermal engineering on rocket, spacecraft, aircraft, or missile programs Experience with electronic unit thermal analysis and control to component junctions Ground testing experience with thermal instrumentation and data acquisition Strong programming skills in MATLAB, Python, or similar for tool development Experience preparing formal documentation CAD experience with SolidWorks or Siemens NX Ability to obtain and hold a U.S. security clearance Preferred Skills and Experience: MS or higher degree in Aerospace Engineering, Mechanical Engineering, or Applied Physics with focus on heat transfer and fluid dynamics Experience with material ablation response modeling in extreme thermal environments Knowledge of material degradation and surface phenomena under demanding conditions Experience with specialized thermal ground test facilities Flight test experience including instrumentation design and post-flight analysis Experience with Thermal Desktop/SINDA Experience with manufacturing and assembly of thermal systems Active U.S. security clearance

Location: United States As a Flight Software Engineer, you will play a key role in designing, developing, and testing flight software that powers these advanced systems. You'll work closely with multidisciplinary teams to deliver high-performance, real-time embedded software that operates reliably under extreme conditions. This is a hands-on role for an engineer who thrives on solving hard problems, building robust systems from the ground up, and moving fast without compromising quality. Responsibilities: Design, develop, and test real-time embedded flight software for missile systems Collaborate with GNC engineers, systems engineers, and hardware teams to ensure seamless integration Implement and maintain software for high-reliability, safety-critical environments Support simulation, hardware-in-the-loop (HIL), and flight testing to validate performance Participate in root cause analysis and debugging across software and system interfaces Follow rigorous software lifecycle practices, including configuration management and verification Contribute to defining and improving development processes, tools, and standards Stay informed on emerging technologies and best practices relevant to flight software and real-time systems Basic Qualifications: Bachelors or Master's degree in Computer Science, Electrical Engineering, Aerospace Engineering, or related field Experience: Open to candidates across all experience levels, from early-career engineers to senior technical contributors. Professional experience, internships, research, open-source contributions, or other hands-on technical work will be considered. Proficiency in C/C++ and experience with real-time operating systems (RTOS) Familiarity with hardware/software integration and real-time system constraints Experience working with GNC systems or similar control-intensive applications Strong understanding of testing practices including simulation and HIL environments Excellent problem-solving skills and attention to detail Ability to work effectively in a fast-paced, multidisciplinary team environment Active or eligible for a Top-Secret security clearance Preferred Skills and Experience: Experience developing flight software for missile, launch vehicle, or spacecraft systems Exposure to FPGA-based systems and embedded software optimization techniques Knowledge of secure software development and cybersecurity best practices Familiarity with agile or iterative development methodologies Hands-on experience with software verification, validation, and integration in defense environments

Location: United States As an Embedded Software Engineer you will be at the forefront of creating, developing, and testing the software that drives and simulates our flight systems. Your role involves close collaboration with fellow client engineers across software and hardware domains to implement and debug software across the entire technology stack from applications and operating systems to networking, firmware, and simulation, ensuring complete mission success. We seek intelligent, collaborative, and driven engineers of all levels who are passionate about problem-solving and eager to contribute to an extraordinary mission. If you thrive in challenging environments and are excited by the prospect of making a tangible impact, we want to hear from you. Responsibilities: Autonomous Systems: Design and implement reliable autonomous software systems, along with the simulations required to validate their precision and dependability. Comprehensive Software Development: Manage the entire software development process, from initial design, prototyping and testing, to final integration and deployment for mission-critical applications. System Testing: Evaluate test outcomes and troubleshoot issues necessitating detailed investigations, including hands-on integration and debugging of hardware/software systems. Develop tools to facilitate testing across various environments: virtualized hardware, real hardware-in-the-loop, and vehicle-in-the-loop testing. Collaboration: Partner with multidisciplinary engineering teams to brainstorm, design, and develop next-generation hypersonic missile capabilities, including advanced guidance algorithms and integrated seeker image processing. Project Leadership: Lead major projects that propel Client's mission forward, ensuring alignment with overall objectives and occasionally traveling to launch and customer sites for testing and operations. Enhance Standards and Practices: Continuously improve software standards and best practices within the software team, fostering an environment of ongoing improvement and innovation. Basic Qualifications: Educational Background: Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering, Mathematics, or a related STEM field, or equivalent practical experience. Experience: Open to candidates across all experience levels, from early-career engineers to senior technical contributors. Professional experience, internships, research, open-source contributions, or other hands-on technical work will be considered. Technical Proficiency: Experience with systems programming in languages such as C++, Python, or Rust, and familiarity with Linux-based development environments. Experience may include work with low-level systems such as Linux kernel development, hardware interfaces, or driver development (e.g., UART, I2C, or similar peripherals). Preferred Skills and Experience: Programming Expertise: Proven proficiency in C++, Rust, or similar systems programming languages. System Experience: Practical experience with real-time embedded systems or distributed computing environments in Linux-based systems, including developing high-quality Linux-based C++ software for common processors an microcontrollers (e.g., PowerPC, x86, ARM). Technical Skills: Proficiency in Linux, including Bash shell scripting, network troubleshooting, and performance analysis (strace, ftrace, etc.), with strong skills in debugging, performance optimization, and unit testing. System Knowledge: Comprehensive understanding of computer architecture and networking protocols (TCP, UDP, etc.). Problem-Solving: Innovative problem-solving approach using first-principles thinking, including developing prototypes to validate key design concepts and quantify technical constraints

Location: United States We are hiring Avionics Hardware Engineers to own flight critical electronics across design, bring up, test, and integration. This role is intended for engineers with experience in complex electronic systems who can take responsibility for avionics subsystems and operate effectively in a high tempo development environment. Engineers in this role may own areas such as motor controllers, avionics backplanes, power distribution, or outward facing avionics test and integration. Responsibilities: Own avionics hardware from architecture and schematic design through PCB layout, bring-up, and production support Drive design decisions including component selection, interfaces, and system tradeoffs Lead hardware bring-up, debugging, and root-cause analysis across lab, integration, and flight test Collaborate cross-functionally to ensure avionics hardware meets performance, reliability, and mission requirements Define and execute hardware validation strategies appropriate to development and flight maturity Produce clear technical documentation covering designs, test results, and engineering changes Partner with manufacturing and suppliers to transition hardware from prototype to production Continuously improve designs based on test results, field data, and evolving requirements Basic Qualifications: Bachelor's degree in electrical engineering or related field Proven end-to-end ownership of avionics or high reliability electronic hardware Strong experience with PCB design, bring up, and lab debugging Ability to operate autonomously and drive hardware issues to closure Preferred Qualifications: Avionics, aerospace, missile, space, automotive, or defense hardware experience Experience with motor controllers, backplanes, power electronics, or flight hardware Familiarity with MILSTD or aerospace hardware standards (e.g., DO254 exposure) Embedded systems or FPGA adjacent hardware experience Experience supporting hardware in integration, test, or flight environment

Location: United States We are hiring experienced Avionics Hardware Engineers to specialize in high-speed digital design, flight computer architecture, and advanced avionics hardware development across our avionics organization. This role is ideal for engineers with deep EE fundamentals and hands-on ownership experience designing complex embedded hardware for mission-critical systems. Engineers in this role focus on flight computer architecture, high-speed digital board design, system bring-up, and hardware validation across real flight hardware. The ideal candidate has experience owning complex board designs from architecture through integration and thrives in fast-paced hardware development environments. Responsibilities: Design and develop advanced board-level electrical hardware including schematic capture, PCB layout oversight, component selection, and interface definition Own high-speed digital and embedded flight computer architectures including processors, memory systems, and board-level integration Perform board bring-up, validation, debugging, and root-cause analysis in the lab Test reference boards and early prototypes using standard lab equipment Drive signal integrity, power integrity, and hardware reliability considerations throughout the design lifecycle Work with avionics, embedded software, test, and manufacturing teams to iterate designs quickly Support hardware/software integration and troubleshooting across avionics platforms Document designs, test results, and engineering changes clearly Basic Qualifications: Bachelor's degree in electrical engineering or related field Strong experience with complex digital or mixed-signal hardware design Experience with high-speed digital systems, embedded processors, memory interfaces, and board-level architecture Experience with PCB design tools (Altium preferred) Hands-on experience with oscilloscopes, logic analyzers, and power supplies Strong understanding of core EE principles including digital systems, signal integrity, power distribution, and hardware debugging Comfortable working in a fast-paced, highly collaborative environment Preferred Qualifications: Experience owning flight computer, avionics, or embedded compute hardware architectures Experience taking complex PCBAs from concept through bring-up, validation, and integration Exposure to embedded systems, firmware, or FPGA interaction Familiarity with aerospace, automotive, robotics, defense, or other high-reliability hardware environments Familiarity with interfaces such as Ethernet, SPI, I2C, UART, CAN, PCIe, or DDR memory systems Basic scripting or programming experience (Python, C/C++

Location: Montreal, Canada ROLE OVERVIEW Our client is seeking a CONOPS and Mission Analysis System Engineer to own the definition, development and documentation of CONOPS, mission scenarios, operational concepts and quantitative mission analyses for current and next‑generation earth observation and communications satellite missions. The engineer will work closely with customers, prime contractors and internal multidisciplinary teams to translate stakeholder needs into clear, traceable operational concepts that guide system architecture, requirements allocation, risk assessment and program planning . Requirements & Systems Engineering Capture stakeholder functional, performance, environmental, and security requirements. Conduct workshops and trade studies to define mission needs. Translate mission objectives into system-level requirements with full traceability. Define and manage spacecraft, payload, and ground-segment interfaces (ICDs, data flows). CONOPS & Mission Analysis Develop and maintain the Concept of Operations (CONOPS) covering all mission phases. Produce supporting artifacts (timelines, scenarios, flow diagrams). Perform mission modeling and analysis (orbit, coverage, link budget, resources). Evaluate architectural trade-offs (orbit, constellation, payload) across cost, risk, and performance. Integration, Verification & Program Support Develop verification plans, test matrices, and validation procedures. Support system integration, IVV activities, and operational readiness. Present technical results at key reviews (SRR, PDR, CDR, ORR). Maintain configuration control within PLM tools. Support B&P activities and technology roadmapping. Operations & On-Orbit Support Support mission operations during critical phases. Monitor telemetry, analyze performance, and update models/CONOPS as missions evolve. Assist with contingency handling, SOOH development, and operator training. Leadership & Collaboration Lead trade studies and coordinate cross-functional teams. Communicate risks and technical status to management and customers. Mentor junior engineers and contribute to process improvement initiatives. Qualifications B.Sc. in Aerospace, Electrical Engineering, or Physics with 8+ years in LEO/MEO mission planning & operations. Strong foundation in systems engineering, orbit mechanics, and space environment. Hands-on integration and troubleshooting experience. Experience with Confluence and JIRA. Strong analytical, communication, and independent working skills. English required; French is an asset.

Location: Montreal, Canada ON-SITE IN MONTREAL IS PREFERRED; REMOTE OR HYBRID IS POSSIBLE FOR THE RIGHT CANDIDATE. Open for candidates in Canada as well as the US Tasks Contribute to the system architecture design of advanced digital telecom payloads. Support system-level performance and functional analysis , including link budgets and signal routing paths. Participate in Failure Detection, Isolation, and Recovery (FDIR) strategy development and analysis. Assist in RF signal analysis and system-level integration activities. Contribute to the creation and maintenance of payload performance budgets . Support requirements derivation, traceability, and management across subsystems. Collaborate with cross-functional teams to define interfaces and ensure end-to-end system performance. Participate in design reviews, technical documentation, test planning, and troubleshooting throughout the development lifecycle. Must haves Bachelor’s or Master’s degree in Electrical Engineering, Telecommunications, or a related field. 2–5 years of experience in space systems, satellite communications, or a related discipline. Foundational knowledge of digital signal processing , RF systems , and telecommunications architectures . Relevant Experience with testing of satellite subsystems. Strong attention to detail, analytical mindset, and team-oriented approach. Effective communication and technical documentation skills. Must be eligible to work in Canada and capable of obtaining necessary security clearance. Complementary skills/knowledge Previous experience in Space and/or Constellation Operations Knowledge of requirements Management tools such as DOORS/Windchill/Jama Demonstrated capability to efficiently work autonomously and with little to no supervision Strong written and verbal communications skills in English, knowledge of French will be considered favorably

Location: Montreal, Canada An experienced EMC/EMI system engineer (SME) with experience on conducted and radiated EMC/EMI analysis & tests at satellite level (for commercial application) to: Lead and produce system level analysis with pertinent hands-on experience and understanding/considering: Mission requirements (frequency bands of operation, type of payloads, coupling between antennas) Unit specs Spacecraft cavity geometry, MLI location, units’ arrangement on spacecraft panels Coupling effects between DC, RF connections and units Spacecraft Panel shielding effectiveness Support writing/reviewing the EMC/EMI satellite test plan Analysis to produce: CE/CS analysis (satellite auto-compatibility) RE/RS RF analysis (Satellite auto compatibility) RE/RS analysis (Launch Vehicle compatibility) Magnetic analysis Surface charging analysis (satellite level) Internal charging analysis (satellite level)

Location: Long Beach, United States Your Mission on the Team: You will be responsible for the overall design and development of satellites for the Meridian Space constellation, from concept through on-orbit operation. This includes top level design, risk and cost assessment, systems engineering, testing and operations. As part of a small team tackling ambitious challenges, you’ll take full ownership of satellite performance in orbit - driving each phase of development to ensure mission success and dependable service delivery. Basic Qualifications: 5+ years professional design/development experience in satellite systems. Proven experience as a leader on at least one satellite program. Skill in using and creating software tools to model systems performance across a variety of disciplines (MATLAB, Python, Excel, etc.) Strong understanding of satellite technologies, design principles, and concepts of operations Bachelor’s degree in aerospace engineering or related field Strong interpersonal, verbal, and written communication skills Preferred Qualifications: 10+ years professional design/development experience in satellite systems Master's degree in Electrical or Systems Engineering, or related field Previous experience with spacecraft and/or space mission top level design Previous work on small LEO satellites Breadth of experience leading satellite systems development and testing Experience with creating satellite simulations and models Satellite operations experience