Вакансии

Location: Montreal, Canada The company offers full relocation support , including immigration assistance. Tasks: The Senior FDIR-FSW Engineer will perform and participate in the following tasks and activities, depending on the background and experience of the candidate. · Define the fault detection actions of the platform at the system and subsystem levels. · Define and document how the platform will interfact with the payload for satellite level FDIR. · Work with the operations team to define the contingency scenarios involving FDIR. · Work with customers to use their input for FDIR strategy to refine MDA’s FDIR strategy ensuing that the strategies are compatible. · Work with the FSW team to determine the FDIR test plan on the FlatSat and DSS. · Work with the AI&T team to determine what FDIR needs to be tested at the spacecraft level. · Work with system, subsystems, payload, and units teams to review FMECAs and provide feedback on the detection, isolation, and recovery of failures modes. · Provide input to the Operations team for Operations Procedures, Operations Manuals, and Satellite test procedures to ensure that the Operations documents and FDIR strategy are aligned. · Review ICDs to provide inputs to the satellite DB team for parameters and monitors. · Review payload, platform, and subsystem design; including block diagrams, ICDs, ConOps, and requirement to ensure that the design is compliant with FDIR requirements. · Review Operations Procedures to ensure that they algin with the FDIR strategy. · Review FDIR test artifacts to determine if the tests are successful and if they are not, work with the team to troubleshoot how to resolve non compliances. · Verification & Validation Matrices for platform and payload FDIR requirements. · Support the payload team in their definition of payload FDIR and how it impacts the satellite level FDIR. · Support the operations team as needed for In-Orbit Test (IOT), anomaly resolution + FDIR. · Support the ICD development activities both HW and SW/DB Must haves · Bachelor’s degree in electrical engineering, computer science or in a relevant field · At least 10 years of relevant practical experience – Can be supplemented with higher degrees relevant to Engineering. · Previous experience with LEO/MEO satellite systems. · Strong cross-functional team collaboration. · Experience with analysis of satellite systems and subsystems. · Familiarity and/or experience with FMECAs and/or Fault Tree Analysis. · An understanding of how failures can propagate through a system. · Ability to decompose system level failures down to the unit level and back up from the unit to the system level. · Knowledge of satellite FSW and how monitors work for FDIR. · Knowledge of how to test HW and SW for FDIR. Complementary skills/knowledge · Previous experience in Constellation FDIR · Creation of Fault Trees and FMECAs · Experience with reliability analysis · Working knowledge of PUS services · Experience with mentoring junior engineers · Experience with FDIR on embedded systems · Experience with payload FDIR. · Knowledge of MS Excel, for the purposes of engineering analyses · Knowledge of requirements Management tools such as DOORS/Windchill/Jama · Demonstrated capability to efficiently work with little to no supervision · Strong written and verbal communications skills in English, knowledge of French will be considered favorably

Location: New York, United States Assistant Project Manager Luxury Residential Construction | NYC Tri-State Area Our client is a well-established General Contractor specializing in high-end residential construction and renovation in Manhattan and the surrounding Tri-State area. Their portfolio includes townhouses, condominiums, and private residences built to the highest standards of craftsmanship and finish. They are seeking an Assistant Project Manager to support a Project Manager on one or more active projects. Role Summary The Assistant Project Manager is the lead administrative partner to the Project Manager, responsible for the orderly flow of information between the GC, subcontractors, vendors, and the design team. The APM owns the project documentation, supports budget and schedule tracking, and helps drive day-to-day coordination from pre-construction through close-out. Key Responsibilities Maintain project schedules and flag potential delays to the Project Manager and Superintendent. Manage the RFI, submittal, and shop drawing process, including logs and follow-up. Prepare and track change orders, commitment documents, and subcontractor agreements. Support trade buy-out and proposal development; assist with minor scope buy-outs directly. Reconcile job costs against budget and coordinate with accounting on client invoicing. • Maintain drawing sets, specifications, and all project files in both physical and electronic form. Prepare meeting agendas, attend job site and client meetings, and produce meeting minutes. Produce daily logs and transmittals; keep documentation current and accessible. Assist with punch list development and close-out deliverables, including owner manuals. Interface with the design team, subcontractors, and suppliers to keep the project moving. Qualifications 1-3 years of experience as an Assistant Project Manager in high-end residential or comparable commercial construction. Bachelor's degree in Construction Management, Architecture, Engineering, or a related field preferred. Working knowledge of construction terminology and the ability to read and interpret drawings and specifications. Proficiency in Procore, Microsoft Project, Excel, Word, and Outlook. Familiarity with Bluebeam, AutoCAD, or similar drawing tools is a plus. Strong written and verbal communication skills; comfortable with design teams and sophisticated clients. Highly organized, detail-oriented, and able to manage multiple priorities across overlapping projects. Team-oriented with a professional presence on the job site and in the office. Salary: $75,000 – $100,000 / year

Location: United States The Opportunity: Join a large, nationally recognized academic medical center as the Director of GU Pathology. This leadership role offers the opportunity to oversee a high-volume GU service within a collaborative, sub-specialized environment while shaping the strategic direction of the department. With access to advanced technology, strong research infrastructure, and a collegial faculty, this position is ideal for a pathologist seeking both academic advancement and meaningful leadership impact. About the Practice: The Department of Pathology & Laboratory Medicine is a physician-led academic group with over 50 faculty members and a fully sub-specialized practice model. The division handles a high volume of surgical and cytology cases annually and works closely with clinicians and surgeons in a multidisciplinary care setting. The department supports robust residency and fellowship programs across multiple subspecialties and offers access to a comprehensive translational research core with advanced molecular and next-generation sequencing capabilities. Position Highlights: Leadership of a dedicated GU pathology team, including supervision and mentorship of multiple pathologists Subspecialty sign-out in GU pathology within a high-volume academic center Opportunity to shape departmental strategy, policies, and quality initiatives Active involvement in teaching, research, and multidisciplinary collaboration Access to advanced laboratory technologies and research platforms Faculty appointment at the Associate or Full Professor level Candidate Qualifications MD or DO with board certification in Anatomic and/or Clinical Pathology Fellowship training in Genitourinary Pathology Minimum of 8 years of pathology experience with demonstrated leadership responsibilities Eligible for medical licensure in the applicable state Strong leadership, communication, and team development skills Compensation & Benefits: Competitive academic compensation package commensurate with experience Comprehensive benefits including health, dental, vision, and retirement plans CME allowance and academic support Malpractice coverage

Location: United States The Opportunity: Join a well-established, hospital-based pathology practice serving a community-focused healthcare system. This role offers a balanced mix of general surgical pathology with the opportunity to incorporate subspecialty interests depending on your background. With a collegial team environment, manageable workload, and strong institutional support, this position is ideal for a pathologist seeking stability, autonomy, and work-life balance. About the Practice: The pathology group supports a community hospital system with a steady volume of surgical and clinical pathology cases. The team operates in a collaborative environment with close relationships between pathologists, clinicians, and hospital leadership. The practice emphasizes efficiency, quality, and patient-centered care, with access to modern laboratory technology and support staff. Opportunities for medical directorship and involvement in hospital committees may be available depending on interest and experience. Position Highlights: General AP/CP sign-out with a diverse case mix including biopsies, resections, and clinical pathology responsibilities Opportunity to incorporate subspecialty expertise (e.g., GI, breast, GU, etc.) Participation in frozen sections and intraoperative consultations Collegial, team-based environment with strong support staff Potential for medical directorship responsibilities Focus on work-life balance with manageable call responsibilities Candidate Qualifications MD or DO with board certification in Anatomic and/or Clinical Pathology Subspecialty fellowship training (preferred but not required) Eligible for medical licensure in the applicable state Comfortable with general surgical pathology and clinical pathology responsibilities Strong communication skills and collaborative mindset Compensation & Benefits: Competitive salary with productivity and/or bonus structure Comprehensive benefits including health, dental, vision, and retirement plans CME allowance and malpractice coverage Potential for relocation assistance and sign-on bonus Location: This opportunity is located in a welcoming Midwestern community offering a lower cost of living, short commutes, and a strong sense of community. The area provides access to outdoor recreation, local dining, and family-friendly amenities, making it an excellent choice for those seeking a balanced lifestyle with professional opportunity.

Location: United States The Opportunity: Join a large, nationally recognized academic medical center as a Faculty GI Pathologist within a highly collaborative, subspecialized department. This role offers the opportunity to practice high-level GI pathology in a high-volume setting, including complex liver, pancreas, and gastrointestinal cases, while engaging in teaching, research, and multidisciplinary care. With access to advanced diagnostic technologies and strong institutional support, this position is ideal for a pathologist seeking academic growth and clinical excellence. About the Practice: The Department of Pathology & Laboratory Medicine is a physician-led academic group with over 50 faculty members and a fully subspecialized practice model. The division manages a high volume of surgical and cytology cases annually and works closely with clinicians and surgeons in a multidisciplinary care environment. The department supports robust residency and fellowship programs across multiple subspecialties, including GI/liver pathology, and provides access to a comprehensive translational research core with advanced molecular diagnostics and next-generation sequencing capabilities. Position Highlights: Subspecialty-focused GI pathology sign-out within a high-volume academic center Exposure to complex cases including liver, pancreas, and transplant pathology Opportunities for teaching residents and fellows in a well-established training program Participation in multidisciplinary conferences and tumor boards Access to advanced diagnostic technologies and research infrastructure Faculty appointment at the Assistant, Associate, or Full Professor level Candidate Qualifications MD or DO with board certification in Anatomic and/or Clinical Pathology Fellowship training in Gastrointestinal Pathology Eligible for medical licensure in the applicable state Strong diagnostic skills and interest in academic pathology Excellent communication skills and collaborative mindset Compensation & Benefits: Competitive academic compensation package commensurate with experience Comprehensive benefits including health, dental, vision, and retirement plans CME allowance and academic support Malpractice coverage Location: This opportunity is located in a vibrant Midwestern metro area offering a strong balance of professional opportunity and quality of life. The region features an affordable cost of living, excellent schools, and access to outdoor recreation, along with a growing cultural and dining scene.

Location: United States; Rochester, United States Position Title: Pediatric Pathologist Department: Pathology / Laboratory Medicine Job Summary The Pediatric Pathologist is a specialized physician responsible for diagnosing diseases in fetuses, infants, children, and adolescents through the examination of tissues, organs, and bodily fluids. This role combines expert laboratory analysis with clinical collaboration to provide accurate diagnoses that guide patient management and treatment. Key Responsibilities Perform macroscopic and microscopic examination of pediatric tissue specimens, including biopsies, resections, and autopsies. Provide accurate and timely diagnostic reports for pediatric surgical pathology, hematopathology, and cytopathology. Collaborate with pediatricians, surgeons, oncologists, and other clinical teams to discuss findings and implications for patient care. Participate in multidisciplinary case conferences and tumor boards. Oversee and ensure quality control in laboratory testing and procedures, adhering to regulatory and safety standards. Interpret laboratory tests, including molecular and genetic studies, as relevant to pediatric conditions. Engage in teaching and training of residents, fellows, medical students, and laboratory staff. Contribute to clinical research, quality improvement initiatives, and academic publications in pediatric pathology. Maintain professional credentials and stay updated with advances in pediatric pathology and diagnostic techniques. Qualifications MD, DO, or equivalent medical degree with board certification in Anatomic Pathology (AP) or Anatomic and Clinical Pathology (AP/CP). Subspecialty training or fellowship in pediatric pathology preferred. Board certification or eligibility in Pediatric Pathology. Strong diagnostic skills in pediatric surgical pathology, hematopathology, and cytopathology. Knowledge of molecular pathology techniques and pediatric-specific disease processes. Excellent communication and collaboration skills for working with multidisciplinary teams. Commitment to academic activities, teaching, and research. Skills and Competencies Exceptional analytical and diagnostic capabilities. Attention to detail and precision in laboratory work. Ability to handle high-pressure situations and urgent cases. Strong organizational and documentation skills. Leadership skills for managing laboratory staff and mentoring trainees. Work Environment Hospital-based pathology department or academic medical center. Regular exposure to pediatric specimens, some potentially infectious or hazardous. Combination of laboratory, clinical, and educational responsibilities.

Location: Milwaukee, United States The Opportunity: Join a large, nationally recognized academic medical center as a Faculty Cytopathologist within a highly collaborative and subspecialized department. This role offers the opportunity to practice high-level cytopathology in a high-volume setting while engaging in teaching, research, and multidisciplinary care. With access to advanced diagnostic technologies and strong institutional support, this position is ideal for a pathologist seeking academic growth and a dynamic clinical environment. About the Practice: The Department of Pathology & Laboratory Medicine is a physician-led academic group with over 50 faculty members and a fully subspecialized practice model. The division processes a high volume of surgical and cytology specimens annually and maintains close collaboration with clinical teams across multiple specialties. The department supports comprehensive residency and fellowship programs and offers access to a robust translational research core with advanced molecular diagnostics and next-generation sequencing capabilities. Position Highlights: Subspecialty-focused cytopathology sign-out within a high-volume academic practice Participation in fine needle aspiration (FNA) procedures and on-site evaluations Opportunities for teaching residents and fellows in an established training program Involvement in multidisciplinary conferences and tumor boards Access to advanced diagnostic technologies and research infrastructure Faculty appointment at the Assistant, Associate, or Full Professor level Candidate Qualifications MD or DO with board certification in Anatomic and/or Clinical Pathology Fellowship training in Cytopathology Eligible for medical licensure in the applicable state Strong diagnostic skills and interest in academic pathology Excellent communication skills and collaborative mindset Compensation & Benefits: Competitive academic compensation package commensurate with experience Comprehensive benefits including health, dental, vision, and retirement plans CME allowance and academic support Malpractice coverage

Location: Costa Mesa, United States WHAT YOU'LL DO Conduct EMI/EMC testing and analysis on electronic systems and components. Drive product maturity through rapid prototyping, design verification, and qualification activities. Develop and implement design strategies to mitigate EMI/EMC issues. Prepare test plans, reports, and documentation for compliance verification. Collaborate with product design teams to ensure EMC requirements are integrated during the design phase. Identify program EMI/EMC risks and define strategies for reducing risk through the definition of modeling, simulation, or experimental activities. Stay updated on relevant standards (e.g., MIL-STD-461G, MIL-STD-464D, DOD-160, FCC, CISPR, IEC) and regulatory requirements. Conduct field tests and assessments to evaluate product performance in real-world environments. Work in a fast-paced environment, having to juggle multiple concurrent projects and customers. REQUIRED QUALIFICATIONS Bachelor’s degree in Electrical Engineering, Electronics, or a related field. 7+ years of experience in EMI/EMC design and testing. Familiarity with EMC/EMI standards and regulations (e.g., MIL-STD-461G, MIL-STD-464D, RTCA DOD-160, FCC, IEC, CISPR, SAE). Proven expertise in E3 design, analysis, testing and mitigation strategies. Specialized in HERO, HEMP, Lightning Protection, ESD, RF exposure limits and operational electromagnetic compatibility. Proficiency in using EMI/EMC testing equipment (e.g., spectrum analyzers, oscilloscopes, antennas, LISN etc.) Experience with simulation tools (e.g., ANSYS, CST Microwave Studio) for EMI analysis. Strong analytical and troubleshooting skills for identifying and resolving EMI/EMC issues. Excellent verbal and written communication skills for reporting findings and collaborating with teams. Ability to manage multiple projects and meet deadlines in a fast-paced environment. Full understanding of PCB Layout techniques to meet mechanical, electrical, EMI/EMC, and manufacturing requirements. Ability to read and interpret schematics and apply best practices appropriate for each design. Familiarity with standard interfaces such as MIPI, DP, I2C, SPI, PCIe, USB, etc. Must be able to obtain and maintain a DoD Secret Clearance

Location: Montreal, Canada The company provides full relocation support, including immigration assistance, and offers a relocation bonus upon arrival in Montreal. Selected candidates may work remotely during the initial months while their immigration process is being completed; however, the long-term expectation is for the individual to transition to onsite work in Montreal once relocation has been finalized. Tasks summary: Architecture Concept & Requirements • Establish functional, performance, environmental and security requirements with mission stakeholders & CONOPs. • Translate requirements into clear payload performance parameters and maintain bidirectional traceability throughout the project lifecycle. • Establish with cybersecurity team payload‑specific requirements & embed resilience and security by design. Payload Architecture Definition • Define the overall digital regenerative payload architecture (optical/RF ISLs, antenna arrays, digitizers/ onboard processing, Feeder links, master reference oscillator & clock synchronizations). • Define Interface Control Documents (ICDs) with spacecraft bus, ground segment and payload specific subsystems. • Define high‑speed data‑bus I/F (Serdes, SpaceWire, SpaceFibre, Ethernet, CAN, fiber). Trade‑Study & Technology Road‑Mapping • Lead trade‑offs for technologies, ASIC/FPGAs/SoCs, high‑speed data‑bus, and on‑board processing algorithms, PVT. • Identify emerging technologies and incorporate them into the company’s long‑term roadmap. System Modeling & Performance Simulation • Build end‑to‑end models of the signal chain (optical/RF, analog/digital) using MATLAB/Simulink, SystemView or Python‑based toolkits. • Run Monte‑Carlo and tolerance analyses to verify gain, SNR, dynamic range, spectral efficiency, G/T, EIRP and other key metrics. • Optimize payload design and performance with operation with traffic models/CONOPs. Simulation & Analysis • Oversee performance simulations & analysis (Gain, Spurious, Linearity, SNR, dynamic range, spectral efficiency, pointing, G/T, EIRP…etc.) and tolerance budgeting. • Optimize Payload DC power budget with traffic & utilization models. Hardware & Firmware • Own system‑level specifications to hardware designers, review schematics, layouts, thermal & mechanical interfaces. • Oversee MODCODs selection and on‑board processing pipelines; define BIST, timing, latency and deterministic behavior. Cross‑Functional Coordination, Stakeholder & Program Interaction • Communicate technical status, risk assessments and trade‑study results to senior management and/or customers or partners. • Act as the primary technical liaison with Electrical, Power, Structures, Thermal, Software, Ground Segment and Mission Operations teams to resolve integration issues early. • Support payload design authority in System design reviews and Mission Operations hand‑over. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Author Payload Verification Master Plan covering unit‑test, subsystem‑test, payload‑level test, environmental and electromagnetic compatibility (EMC) test campaigns. • Define test‑automation framework set‑up, test‑case definition, results analysis and test‑report certification. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns. • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to the company’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Ensure all artefacts, analysis, software, deliverables and documentation are version controlled in PLM environment. • Chair design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation. On Orbit & Operations Support • Technical support to Mission Operations for routine payload health monitoring, contingency handling and performance trending. • Lead root‑cause investigations for on‑orbit anomalies; update design baselines and lessons‑learned. • Analyze on‑orbit telemetry, update filter parameters, and generate performance reports. • Define SOOH and associated operator training. Required Qualifications:  B.Sc. in Electrical Engineering, Aerospace or Physics (M.Sc. preferred) with 12 + years of digital regenerative payload system design experience on LEO/MEO missions.  Comprehensive knowledge of digital regenerative communications, SDR, DSP, DVB RCS/SX protocols, Modulation schemes, Class of Service, Networking, MPLS, 2G, 5G, NTN.  Strong technical writing ability (requirements, ICDs, test procedures, risk reports) and presentation skills; comfortable interfacing with customers, suppliers and senior leadership.  Strong understanding of aerospace system engineering fundamentals.  Hands-on individual who can support systems integration processes and capability to test systems and resolve problems.  Experience with Confluence and JIRA.  Demonstrated capability to efficiently work with little supervision.  Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity.  Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Montreal, Canada The company provides full relocation support, including immigration assistance, and offers a relocation bonus upon arrival in Montreal. Selected candidates may work remotely during the initial months while their immigration process is being completed; however, the long-term expectation is for the individual to transition to onsite work in Montreal once relocation has been finalized. Tasks summary: Architecture Concept & Requirements • Gather functional, performance, environmental and security requirements from mission stakeholders & CONOPs. • Map requirements to payload equipment performance with I/F with on-board processor • Coordinate with cybersecurity team for payload‑specific assessments • Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Payload Architecture & Design • Implement the high‑level digital payload architecture (optical ISLs, Phased array antennas, Feeder links & front‑end), master reference oscillator & clock synchronizations. • Produce Interface Control Documents (ICDs) with other subsystems and ground segment. • Implement high‑speed data‑bus I/F (SpaceWire, SpaceFibre, Ethernet, CAN). Simulation & Analysis • Perform performance simulations (Gain, Spurious, Linearity, SNR, dynamic range, spectral efficiency, G/T, EIRP…etc.) and Monte‑Carlo analyses for tolerance budgeting. • Define and maintain Payload DC power budget with traffic & utilization models • Perform FMECA, Fault tree and FDIR, reliability modeling and availability to meet mission objectives Hardware & Firmware • Provide system‑level specifications to hardware designers, review schematics, layouts, thermal interfaces, and mechanical constraints. • Support SW development for MODCODs and on‑board processing pipelines; ensure BIST, timing, latency and deterministic behavior. Cross‑Functional Coordination, Stakeholder & Program Interaction • Communicate technical status, risk assessments and trade‑study results to senior management and/or customers or partners. • Support payload design authority in System design reviews, Power/Structure/Thermal interfaces and Mission Operations assessments. • Liaise with Electrical, Power, Structures, Thermal, Software, Ground‑Segment and Mission‑Operations teams to resolve integration issues early. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Develop Payload Verification Master Plan covering unit‑test, subsystem‑test, payload‑level test, environmental and electromagnetic compatibility (EMC) test campaigns. • Lead test‑automation framework set‑up, test‑case definition, results analysis and test‑report certification. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns. • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to the company’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Ensure all artefacts, analysis, software, deliverables and documentation are version controlled in PLM environment. • Lead and Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation. On Orbit & Operations Support • Provide technical support to Mission Operations for routine payload health monitoring, contingency handling and performance trending. • Lead root‑cause investigations for on‑orbit anomalies; update design baselines and lessons‑learned. • Analyze on‑orbit telemetry, update filter parameters, and generate performance reports. • Support SOOH development and associated operator training. Required Qualifications:  B.Sc. in Electrical Engineering, Aerospace or Physics with 8 + years of digital regenerative payload system design experience on LEO/MEO missions.  Comprehensive knowledge of digital communications, SDR, DSP, DVB RCS/SX protocols, Modulation schemes, Class of Service, Networking, MPLS, 2G, 5G NTN.  Strong technical-writing ability (requirements, ICDs, test procedures, risk reports) and presentation skills; comfortable interfacing with customers, suppliers and senior leadership.  Strong understanding of aerospace system engineering fundamentals.  Hands-on individual who can support systems integration processes and capability to test systems and resolve problems.  Experience with Confluence and JIRA.  Demonstrated capability to efficiently work with little supervision.  Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity.  Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Montreal, Canada The company provides full relocation support, including immigration assistance, and offers a relocation bonus upon arrival in Montreal. Selected candidates may work remotely during the initial months while their immigration process is being completed; however, the long-term expectation is for the individual to transition to onsite work in Montreal once relocation has been finalized. Tasks summary: Architecture Concept & Requirements • Gather functional, performance, pointing, environmental and security requirements from mission stakeholders & CONOPs. • Capture, trace and map payload requirements from mission level to subsystem level • Coordinate with cybersecurity team for payload‑specific assessments • Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Payload Architecture & Design • Design the SAR system architecture (antenna arrays & RF front-end Tx/Rx components, digital beamforming, processing chain and digital electronics, power, thermal, and mass). • Lead the conceptual, preliminary, and detailed design phases, producing trade studies, performance budgets). • Produce Interface Control Documents (ICDs) with other subsystems and ground segment. • Provide system‑level specifications to hardware designers, review schematics, layouts, thermal interfaces, and mechanical constraints Simulation & Analysis • Perform performance simulations for tolerance budgeting and image quality. • Support algorithm and analytical development to process SAR. • Define and maintain Payload DC power budget with utilization models. • Perform FMECA, Fault tree and FDIR, reliability modeling and availability to meet mission objectives Cross‑Functional Coordination, Stakeholder & Program Interaction • Communicate technical status, risk assessments and trade‑study results to senior management and/or customers or partners. • Support payload design authority in System design reviews, Power/Structure/Thermal interfaces and Mission Operations assessments. • Liaise with Electrical, Power, Structures, Thermal, Software, Ground‑Segment and Mission‑Operations teams to resolve integration issues early. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Develop Payload Verification Master Plan covering unit‑test, subsystem‑test, payload‑level test, environmental and electromagnetic compatibility (EMC) test campaigns. • Lead test‑automation framework set‑up, test‑case definition, results analysis and test‑report certification. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns. • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to the company’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Ensure all artefacts, analysis, firmware, deliverables and documentation are version controlled in PLM environment. • Lead and Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation. On Orbit & Operations Support • Provide technical support to Mission Operations for routine payload health monitoring, contingency handling and performance trending. • Lead root‑cause investigations for on‑orbit anomalies; update design baselines and lessons‑learned. • Analyze on‑orbit telemetry, update filter parameters, and generate performance reports. • Support SOOH development and associated operator training. Required Qualifications:  B.Sc. in Electrical Engineering, Computer science or Physics with 10 + years of experience supporting SAR remote sensing system development, integration and test on LEO/MEO missions.  Strong technical-writing ability (requirements, ICDs, test procedures, risk reports) and presentation skills; comfortable interfacing with customers, suppliers and senior leadership.  Strong understanding of aerospace system engineering fundamentals.  Hands-on individual who can support systems integration processes and capability to test systems and resolve problems.  Experience with Confluence and JIRA.  Demonstrated capability to efficiently work with little supervision.  Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity.  Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Colombia; Argentina; Mexico; Honduras; Peru Job Title: Talent Acquisition Team Leader Location: Remote (Open to all LATAM Countries) Employment Type: Contractual Work Schedule: 8:00 AM – 5:00 PM PT Reports to: Talent Acquisition Director Overview: We are seeking a highly motivated and detail-oriented Talent Acquisition Team Leader to support our Talent Acquisition Director in overseeing recruitment operations. This role is ideal for someone who is proactive, organized, and possesses strong leadership, communication, and problem-solving skills. The Talent Acquisition Team Lead will play a key role in ensuring team performance, maintaining quality standards, and driving continuous improvement across the recruitment process. Key Responsibilities: Support the Talent Acquisition Director in managing the day-to-day operations of the recruitment team Monitor team performance and ensure KPIs (e.g., time-to-fill, submissions, interview-to-hire ratios) are consistently met Ensure recruiting processes and best practices are strictly followed across the team Evaluate interviews conducted by recruiters and provide feedback to improve quality and effectiveness Conduct regular quality checks on candidate profiles before submission to ensure alignment with role requirements and client expectations Train, mentor, and onboard Talent Acquisition Specialists to enhance their skills and performance Identify performance gaps and implement coaching or corrective actions as needed Collaborate with internal stakeholders to ensure smooth communication and alignment throughout the hiring process Assist in developing and improving recruitment strategies, workflows, and standards Maintain high standards of professionalism, accountability, and team morale Qualifications: Proven experience in Talent Acquisition, Recruitment, or a similar role, with exposure to team management or leadership responsibilities Strong understanding of recruiting metrics and performance management Experience in training, mentoring, or coaching recruiters or Talent Acquisition Specialists Excellent communication skills (both verbal and written) Strong attention to detail and ability to assess candidate quality effectively Highly organized with the ability to manage multiple priorities in a fast-paced environment Problem-solving mindset with a proactive and positive attitude Ability to enforce processes while maintaining strong working relationships with the team What We’re Looking For: Someone who is smart, resourceful, and takes ownership of their work A strong team player with a great attitude and a high level of professionalism A leader who can balance accountability with support and mentorship A clear and confident communicator who can work effectively across all levels Someone who’s willing to learn and has a “can-do” attitude. Budget: $1000-1200/month

Location: San Francisco, United States Key Resource Group is partnering with a leading technology company to advance the future of autonomous vehicle development. We are seeking Vehicle Operators to play a critical role in testing, collecting data, and refining cutting-edge driving technology. As part of this program, you will operate test vehicles in real-world conditions, gathering crucial data that directly impacts innovation. If you are highly observant, safety-conscious, and eager to contribute to the next generation of mobility, this role is for you. Join a fast-paced, dynamic team that values precision, collaboration, and continuous learning. What You’ll Do Drive test vehicles for 4–8 hours daily on predefined routes while strictly adhering to safety protocols. Perform routine vehicle inspections to ensure roadworthiness and address any maintenance needs. Conduct basic software operations to support real-time data collection. Accurately document observations, issues, and anomalies encountered during test runs. Collaborate with engineers by providing valuable feedback to enhance system performance. Assist with vehicle logistics, maintenance coordination, and storage. Requirements Must reside in the Greater San Francisco Bay Area . Possess 1–2 years of professional driving experience . Hold a valid California driver’s license with a clean driving record. Must be authorized to work in the United States for any employer. Ability to pass a drug screen , background check , and Motor Vehicle Record (MVR) check. Preferred Qualifications Experience with data collection or technology-driven environments. Strong attention to detail and observational skills. Excellent communication and teamwork abilities. Comfort working in a fast-paced and evolving environment. Salary: $25 – $28 / hour

Location: India Position: Talent Acquisition Specialist (India - Remote) Job Summary: We are seeking a dynamic and results-driven Talent Acquisition Specialist to join our team, focusing on hiring candidates within India. This role is pivotal in sourcing, attracting, and interviewing candidates to find the ideal fit for our vacancies. The ideal candidate will be responsible for selecting and advancing qualified candidates to the subsequent stages of their application, including the evaluation of assessment examination results. Key Responsibilities • Strategic Sourcing and Screening: Conduct daily in-depth assessments and screenings of all applicants, ensuring a high-quality candidate pipeline for positions within India. • Interviewing Excellence: Implement and apply various interviewing techniques and methods to thoroughly evaluate candidates during in-depth interviews. • Initial Candidate Engagement: Perform initial screening interviews, identifying potential fits for further evaluation. • Collaborative Hiring: Work closely with Hiring Managers to recommend candidates, partnering with relevant stakeholders to offer competitive compensation packages and negotiate with candidates effectively. • Record Keeping and Compliance: Maintain accurate and concise records and reports on all recruitment phases, utilizing Applicant Tracking System (ATS) and HRIS tools, ensuring compliance with local Indian regulations and hiring practices. • Performance Metrics: Achieve target Ops Validation endorsements, maintaining high standards and expectations throughout the screening process. • Process Calibration: Regularly calibrate screening and selection processes with Hiring Managers to align with specific account requirements and organizational goals. • End-to-End Recruitment: Manage the entire recruitment lifecycle, from sourcing and interviewing to assessment administration and final decision-making. Desired Skills and Qualifications: • Proven experience in Talent Acquisition, with a strong understanding of the Indian job market and hiring practices. • Excellent communication and interpersonal skills, with the ability to engage effectively with candidates and stakeholders. • Strong analytical skills and the ability to conduct thorough candidate evaluations. • Proficiency in using ATS specifically Breezy HR, and Job Boards such as LinkedIn Recruiter, Indeed and the like. • Knowledge of local employment laws and regulations in India. • Ability to work in a fast-paced environment and manage multiple priorities. • Team player with a strong work ethic and the ability to handle confidential information with discretion. Job details: • Employment Type: Contract • Duration: 1 year, with the possibility of extension • Compensation: Given the full-time support required, the projected monthly income ranges from ₹30,000 to ₹40,000. • Work Schedule: Monday through Friday, adhering to a night shift to align with US Time Zones (9:30 PM – 6:30 AM IST). • Location: Remote (Work from Home) • Internet Requirements: A minimum internet speed of 50 Mbps is required, with a LAN connection recommended for optimal performance. Join Us: Become a part of our dynamic team and contribute to our mission of finding the best talent to drive our organization forward. If you are passionate about recruitment and want to make a significant impact in a growing company, we would love to hear from you.

Location: Bogota, Colombia What This Role Is About We’re looking for a Project Manager who actually gets things done . You’ll keep projects organized, timelines moving, and people aligned — without micromanaging or overcomplicating things. If you like turning chaos into clear plans, communicating with different teams, and seeing projects go live because of your work, this role’s for you. What You’ll Be Doing Own projects from kickoff to launch (and beyond) Break big goals into clear tasks, timelines, and next steps Keep teams aligned and accountable across different time zones Track progress, spot risks early, and fix issues before they blow up Be the main go-to person for clients and internal teams Run check-ins, status updates, and wrap-up reviews Keep project docs clean, updated, and easy to follow What We’re Looking For 3+ years of experience managing projects (tech, ops, marketing, or similar) Comfortable using tools like Asana, ClickUp, Trello, Jira , or similar Clear communicator — you know how to explain things without overcomplicating Organized, detail-oriented, and good at juggling multiple projects Works well independently in a remote setup Strong problem-solver who doesn’t freeze when plans change PMP or similar cert is a bonus, not a must You’ll Probably Love This Role If You… Like structure but don’t need micromanagement Enjoy working with different teams and clients Can balance speed and quality Are proactive and speak up when something needs fixing Want real ownership and impact, not just task-checking Why You’ll Like Working Here Fully remote setup Real ownership over projects (no busywork) Fast-paced but supportive environment Clear expectations and room to grow

Location: Haverhill, United States Location: Haverhill, Massachusetts Shift Options: Overnight Shift: 11:00 PM – 7:00 AM → Monday–Saturday Join our client’s team as a Palletizer ! We’re looking for dependable, hardworking individuals — English or Spanish speakers welcome — to support a fast-paced production environment. English or Spanish speakers are welcome! What You’ll Do: Operate equipment to stack and organize boxes for shipment Inspect products for quality issues and ensure proper packaging by weight Rotate through tasks to support other production needs Follow GMP and HACCP safety/sanitation procedures What We’re Looking For: Ability to lift 50+ lbs regularly Comfortable working in cold environments Ability to stand, bend, and move for long periods Apply today — we’re scheduling interviews now! Salary: $15 – $16 / month

Location: Orange County, United States Our client, a well-established real estate company in Orange County, has engaged us to identify a Tax Manager to join their tax team. Reporting to the Director of Income Tax Planning & Compliance, the Tax Manager will oversee income tax planning, compliance, and risk management across corporate, partnership, and REIT structures, ensuring the company’s tax position is optimized, compliant, and aligned with business strategy.  They also have a Hybrid work-from-home schedule! The company acquires, develops, redevelops, and manages multifamily residential properties. They combine strategic growth with long-term value creation for shareholders, residents, and communities. The Tax Manager will lead complex tax matters, collaborate closely with cross-functional teams and external advisors, and serve as a key internal authority on tax technical issues, audits, and strategic transactions. This leader will bring deep technical expertise, strong ownership, and the ability to execute with precision in a fast-paced, deadline-driven environment while balancing strategic priorities with hands-on delivery. Below you’ll find more details about the opportunity. We hope it brings to mind someone who may be interested in this highly visible position, and we invite you to share the information with others. MAIN RESPONSIBILITIES & COMPETENCIES Work and manage outside advisors to review and file timely federal, state, and local corporate, and partnership income tax, franchise tax and information tax returns. Responsibilities include managing internal and tax deadlines, preparing Company data for returns, review returns, and collaborate with tax consultants. Implement effective tax strategies to minimize the overall tax burden of the company and to minimize overall costs associated with the tax function. Assist with due diligence for proposed acquisitions and support the Company’s tax matters related to disposition transactions. Responsible for filing and paying all Company's indirect tax filings, including but not limited to B&O tax, gross receipts tax, and business licenses. Assist with management of Company's taxable REIT subsidiary, tasks include preparing quarterly income tax provision, managing intercompany transactions, managing services and income streams, tracking tax credit generation and utilization, and conducting annual corporate overhead survey. Assist with income tax examinations and respond to various tax notices. EDUCATION, EXPERIENCE, & PREFERRED SKILLS Bachelor’s degree (B.A./B.S.) in Accounting or Finance; Master’s or Ph.D. degree strongly preferred. 5 – 7 or more years of progressive experience in tax planning, tax compliance, and tax return preparation involving corporate, partnership, and REIT tax matters. CPA certification preferred. Yardi experience preferred. Big 4 public accounting experience preferred. Knowledge of partnership taxation required, knowledge of Corporate tax and California tax matters; good understanding of REIT qualification matters and REIT/TRS transfer pricing issues; strong understanding of U.S. GAAP reporting for income taxes. Ability to thrive in a fast-paced, dynamic environment with shifting priorities and time-sensitive deadlines. Strong communication skills with the ability to influence across all levels of the organization and engage effectively with external auditors and advisors. Exceptional attention to detail and the ability to manage multiple priorities in a deadline-driven environment. Demonstrated ability to work independently while remaining a collaborative and dependable team member. Demonstrated ability to lead and coordinate work across project teams, including assigning responsibilities, supervising deliverables, and supporting the development, performance management, and engagement of team members. Sound judgment and discretion when navigating sensitive matters, with the ability to produce clear, concise written communications and deliver effective presentations on complex tax topics to internal audiences. Strong analytical capability to review, interpret, and synthesize tax documents, proactively identifying issues, risks, and opportunities and escalating them appropriately. Consistent decision-making grounded in a solid understanding of company policies, procedures, and business practices to meet objectives and deliver results within established timelines.

Location: Thousand Oaks, United States Our client, Teledyne Technologies Inc. (NYSE: TDY) , has retained us to recruit a Manager of Income Tax Compliance . This leader will manage U.S. and international income tax compliance, oversee co-sourced filings, monitor legislation, support audits, integrate acquired entities, and advise leadership on tax risks. The company is headquartered in Thousand Oaks, California , with worldwide revenue exceeding $4B . Teledyne is a leading provider of sophisticated digital imaging products and software, instrumentation, aerospace and defense electronics, and engineered systems. Its operations are primarily located in the United States, Canada, the United Kingdom, and throughout Europe.  The company just concluded 2025 with the largest quarterly orders, sales, and non-GAAP earnings, as well as operating margin in the company’s history.  As a result their stock recently hit an all-time high. Be visionary Teledyne Technologies provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging, and pharmaceutical research. At Teledyne Technologies, the company offers a competitive salary, discretionary bonus, and comprehensive benefits from day one, including health, dental, and vision insurance. Employees enjoy paid vacation, holidays, and sick leave, plus a 401(k) with company match and an Employee Stock Purchase Plan to share in the company’s success. They are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Join the Teledyne Tax team! This is an opportunity for an income tax compliance professional who is excited to manage U.S. and international tax filings while supporting a global, acquisitive organization. Their website is: www.teledyne.com The following information provides more insight. After reviewing the details below, our hope is that you may know someone interested in this highly visible role. Feel free to distribute this document to others. Essential Duties and Responsibilities: The Manager of Income Tax Compliance will oversee U.S. and international tax filings, ensure compliance across Teledyne Technologies’ global operations, support cross-functional teams, and help drive process improvements and efficiency in the tax compliance function. Preparation and/or review of US federal, state and local income tax filings for a global corporation, including forms 5471 review. Their filings are co-sourced with an external public accounting firm. Data collection and analysis working with both domestic and foreign business units in order to prepare the federal/state tax returns including the reporting of foreign information returns. Preparation of timely income tax estimated and extension filings and payments and tracking of refund requests. Monitor changing tax legislation. Anticipate future events and advise leadership of risks and opportunities. Assist in integration of acquired companies in tax compliance processes and systems. Support government audits and managing state notices and inquiries. Manage Country by Country reporting and notifications, and Pillar 2 minimum tax. Assist in the management of non-US income tax returns with external public accounting firm. Review of non-income tax returns such as Oregon CAT, Ohio CAT and insurance excise returns. Assist in orienting and accounting for newly acquired legal entities as Teledyne grows. Assist with and/or lead special projects; monitor evolving legislation, calculation and disclosure requirements. Skills & Qualifications: Bachelor's degree (B.S.) from four-year college or university in accounting and 5 plus years of relevant experience and/or training; or equivalent combination of education and experience. Masters Degree in Taxation and CPA desired. Technical Skills – A solid understanding of US income tax compliance (federal, state, local reporting for domestic and foreign entities) for a global corporation is required. Knowledge of income tax calculations and methods. Leverage experience; stay current through reading, training and development opportunities. Experienced with tax compliance software (e.g., OneSource), financial systems (e.g., OneStream), analytic and data management tools and software. Analytical - Uses intuition and experience; Identifies and researches data, events or issues. Seeks process efficiencies and continuous improvement. Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully. Performs self-review of deliverables and documentation. Project Management – Organized; Communicates changes, challenges and progress. Oral Communication - Listens and gets clarification; Responds well to questions; Participates in meetings. Presents concise information with detail appropriate for intended audience. Written Communication - Writes clearly and informatively; Edits work for content, spelling and grammar; Presents numerical data accurately and effectively. Teamwork - Gives and welcomes feedback; Supports everyone's efforts to succeed. Business Acumen - Understands business implications of deliverables and tax matters; Cost Consciousness - Works within approved budget; Develops and implements cost saving measures; Supports Company profitability initiatives. Ethics - Works with integrity and ethically. Organizational Support - Follows policies and procedures; Supports organization's goals and values. Shares information with colleagues. Positive contributor to tax team success. Judgment – Demonstrates professional judgement; Includes appropriate people in decision-making process. Motivation – Independent in monitoring upcoming deadlines and anticipating leadership’s needs. Dedicated to meeting deadlines with quality deliverables. Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Accepts responsibility for own actions; Follows through on commitments. Adaptability - Adapts to evolving requirements from legislative, technology or business activities.