Вакансии

Location: Boston, MA Workplace: OnSite At WHOOP, we're on a mission to unlock and inspire performance for life. WHOOP empowers members to perform at a higher level through a deeper understanding of their bodies and daily lives. WHOOP is hiring a Staff Hardware Test Engineer (Manufacturing) to lead manufacturing test strategy and deliver scalable test solutions that ensure every WHOOP device meets the highest standards of quality and reliability. You will take ownership of complex manufacturing test challenges from high-level objectives through strategy, execution, and production outcomes. Working across Manufacturing Engineering, Electrical Engineering, Firmware, Mechanical Engineering, Quality, and Reliability, you will drive alignment on test strategy, influence product and manufacturing decisions, and deliver measurable improvements in test coverage, quality, yield, cycle time, and cost. You will also establish best practices, raise engineering standards, and mentor engineers across the team.   RESPONSIBILITIES: - Lead the architecture, development, validation, and deployment of automated test equipment (ATE), electrical test fixtures, and control systems for engineering validation, NPI, and mass production. - Develop and establish scalable automated test methodologies and applications using Python to validate electrical, functional, RF, and sensor performance on manufacturing lines. - Drive cross-functional alignment across Hardware, Firmware, Manufacturing, and Quality engineering teams to make tradeoffs around test coverage, product quality, cycle time, yield, cost, and schedule. - Lead complex and ambiguous manufacturing test investigations, structuring problems, identifying technical and operational risks, and driving cross-functional teams to root cause and resolution. - Own manufacturing test readiness and outcomes through factory bring-up and production ramp with manufacturing partners, including fixture qualification, calibration, correlation, troubleshooting, and continuous improvement. - Analyze manufacturing and test data to identify systemic opportunities and deliver measurable improvements in yield, process capability, test coverage, quality, cycle time, and cost. - Establish manufacturing test best practices, methodologies, and standards that improve execution quality and scalability across programs. - Identify technical and execution risks proactively and drive mitigation strategies with engineering teams and manufacturing partners. - Contribute to product and manufacturing roadmaps by identifying test technology, infrastructure, and capability investments required for future products. - Mentor engineers and provide technical guidance on test architecture, debugging, automation, and manufacturing test methodologies. QUALIFICATIONS: - Bachelor's degree in Electrical Engineering, Computer Engineering, or a related technical discipline. - 10+ years of experience developing hardware test systems, automated test equipment, or manufacturing test solutions for high-volume consumer electronics or similarly complex products. - Demonstrated experience independently owning manufacturing test strategy and execution from product development through NPI, ramp, and mass production. - Proven ability to lead complex, ambiguous technical initiatives and drive outcomes across multidisciplinary engineering and operations teams. - Deep understanding of electronics, instrumentation, measurement systems, and communication protocols such as UART, I²C, SPI, USB, Bluetooth, and NFC. - Experience designing electronic circuits and PCBAs using tools such as Altium Designer. - Strong proficiency in Python for developing automated manufacturing test applications; experience with C/C++ or other systems languages is a plus. - Extensive experience designing, validating, and debugging manufacturing test fixtures, instrumentation, and production hardware. - Strong understanding of manufacturing test methodologies and data analysis, including test coverage, calibration, correlation, GR&R, process capability, yield analysis, and failure analysis. - Extensive experience working with CMs and JDMs, including factory bring-up, NPI, production ramp, and sustaining support. - Demonstrated ability to influence technical decisions, align stakeholders, and communicate effectively across engineering, operations, and leadership. - Track record of delivering measurable improvements in manufacturing quality, yield, efficiency, test coverage, or cost. - Experience mentoring engineers and improving engineering practices within a team. - Ability to travel up to 15%, both domestically and internationally. - Strong commitment to leveraging AI tools in day-to-day tasks, ensuring AI-assisted work aligns with the same high-quality standards as personal contributions. This role is based in the WHOOP office located in Boston, MA. The successful candidate must be prepared to relocate if necessary to work out of the Boston, MA office. Interested in the role, but don’t meet every qualification? We encourage you to still apply! At WHOOP, we believe there is much more to a candidate than what is written on paper, and we value character as much as experience. As we continue to build a diverse and inclusive environment, we encourage anyone who is interested in this role to apply. WHOOP is an Equal Opportunity Employer and participates in E-verify https://www.e-verify.gov/ to determine employment eligibility. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. The WHOOP compensation philosophy is designed to attract, motivate, and retain exceptional talent by offering competitive base salaries, meaningful equity, and consistent pay practices that reflect our mission and core values. At WHOOP, we view total compensation as the combination of base salary, equity, and benefits, with equity serving as a key differentiator that aligns our employees with the long-term success of the company and allows every member of our corporate team to own part of WHOOP and share in the company’s long-term growth and success. The U.S. base salary range for this full-time position is $180,000.00 - $215,000.00 Salary ranges are determined by role, level, and location. Within each range, individual pay is based on factors such as job-related skills, experience, performance, and relevant education or training. In addition to the base salary, the successful candidate will also receive benefits and a generous equity package. These ranges may be modified in the future to reflect evolving market conditions and organizational needs. While most offers will typically fall toward the starting point of the range, total compensation will depend on the candidate’s specific qualifications, expertise, and alignment with the role’s requirements. Learn more about WHOOP https://www.whoop.com/us/en/careers/?srsltid=AfmBOopKmph9d0DLBlogZu8mx6do0dzjNS8eJlfc4PQqQtdU6F8DGKBg.

Location: Mississauga, Ontario, Canada ClinChoice is a global full-service CRO committed to professional growth and a quality-driven “one-team” culture. We are seeking a Senior Statistical Programmer to join our in-house team and support projects across a diverse client portfolio, including pharmaceutical, biotechnology, medical device, and consumer health companies of varying sizes. We are seeking a highly skilled Senior Statistical Programmer to lead statistical activities for clinical trials. This role requires hands-on statistical expertise, strong communication skills, and the ability to independently lead projects while collaborating closely with cross-functional teams. Join our team: you can be part of making a difference in peoples' lives and experience a fulfilling and rewarding career! Main Job Tasks The Senior Statistical Programmer is a delivery-focused role responsible for leading and supporting aspects of the programming effort to deliver technical programming and information components of a project. The position requires strong technical skills, thorough knowledge of the industry, and demonstrated experience leading statistical programming activities and providing technical guidance to other programmers . The individual should be able to independently perform programming tasks, oversee programming deliverables, and effectively collaborate with cross-functional teams and external vendors. Responsibilities Programing for clinical trials: Program and validate derived datasets, tables, figures, listings. Process data from the external sources. Perform ad hoc exploratory analyses for publications and programming support other functions of Research and Development or other organizations. Oversee programing work/deliverables from CROs. Contribute to the design/implementation/review of Case Report Form, Data Transfer Specification, Statistical Analysis Plan, SDTM/ADaM Specification documents, Define packages. Electronic submissions: Program and validate CDISC compliant deliveries for the electronic submissions. Support in the creation of supporting documentation for submissions. Project Management: Ensure programming deliverables are on time and of high quality. Help managing internal contractors and external vendors. Standards and Guidelines: Participate in development of departmental working instructions and guidelines. Help in creation of enhanced functions/macros and utilities. Qualification & Experience Bachelor or Master degree in Computer Science, Mathematics, Engineering, Medical or related discipline. BS with more than 5 or MS with 3 years of experience in statistical programming (SAS, R) in the pharmaceutical industry. Working knowledge of SAS and its various components. Knowledge of R programming in clinical trials Familiarity of the drug development process. Strong SAS and SAS Macro language skills. R programming skils in clinical trials Strong knowledge of industry standards. Ability to work on data integrations (ISS and ISE). Strong oral and written communication skills. Ability to communicate details of the analysis to other team members with less technical experience. Open Date: 9/29/2026 Close Date: 11/23/2026 ClinChoice Canada Inc. is proud to be an equal opportunity employer, valuing and respecting diversity.  We are committed to inclusive, barrier-free recruitment and selection processes. We will accommodate the needs of qualified applicants under the Human Rights Code and the Accessibility for Ontarians Disabilities Act, in all aspects of the hiring process, upon request by calling + 1 (647)724-5709 x 301. We thank all applicants for their interest; however, only those being considered for an interview will be contacted. In accordance with Federal Personal Information Protection and Electronic Documents Act ("PIPEDA") , personal information is collected under the authority of the Act and will only be used for candidate selection. #LI-TT1 #LI-Remote #senior #permanent The base salary pay range represents the anticipated low and high range for this position. Actual salary will vary based on various factors such as the candidate’s qualifications, skills, competencies, and proficiency for the role. Canada Pay Range $80,000 — $95,000 CAD

Location: Valencia Workplace: OnSite ROLE HIGHLIGHTS - Title: Engineering Satellite Build Lead - Location: Valencia, Spain - Department: Space Systems Testing Team, Engineering - Reports to: Testing Team Lead - Employment type: Permanent - Workplace model: Hybrid per company policy (up to 2 days/week remote); in practice, this hands-on, technical-managerial role requires being onsite at our Valencia office most of the time - Employment is subject to applicable security screening WHY THIS ROLE MATTERS You own the end-to-end build, integration, testing and delivery of the developmental satellites, starting with early preparation and alignment with designers, procurement and operations teams, through the Qualification Model (QM) and Flight Model (FM). You plan the AIT timeline, lead the build team, and keep build documentation, configuration tracking and lessons learned flowing back to designers, so every future unit is faster and easier to build. This position sits within the Testing Team. It is important to note that this is developmental, prototype satellite work rather than repeat-production integration: requirements are not yet frozen, designs evolve frequently, and the Lead is expected to resolve novel problems rather than execute a fixed procedure. WHO WE ARE ICEYE delivers space-based intelligence, surveillance and reconnaissance (ISR) capabilities to governments and allied nations, including sovereign and turnkey ISR missions built on ICEYE's world-leading synthetic aperture radar (SAR) satellite technology, alongside access to data from the world's largest SAR satellite constellation. These capabilities let partners detect and respond to critical changes anywhere on Earth, day or night and in any weather, with ultra high-resolution imagery and high-frequency revisits. As a trusted partner for defence, intelligence, security and maritime domain awareness, ICEYE's near real-time data creates a tactical advantage for mission-critical operations. Founded and headquartered in Finland, ICEYE operates globally with over 1000 employees across Europe, North America, the Middle East and Asia-Pacific. YOUR DAY-TO-DAY RESPONSIBILITIES Build, integration and delivery ownership (EC, Engineering Configuration) - Own end-to-end build, integration, testing and delivery of the R&D satellite system, across QM and FM units - Plan all AIT activities and the AIT timeline for R&D build - Manage the build team and actively participate in build execution - Own build documentation, including build records, configuration tracking (parts traceability) and high-level build procedures - Document lessons learned and give structured feedback to designers to improve build efficiency and testability QM and FM build and system-level testing - Plan and own the QM system build and its system qualification activities - Own system-level integration and testing of FM satellites, verifying functional performance, capturing any required modifications, and maintaining close traceability to support knowledge transfer to the production line - Define system-level test blocks and flows with technical owners, and plan, schedule and coordinate execution of functional tests, SLC, Mock Ops and other required system-level test activities (FM) - Across both QM and FM: accountable for test execution readiness and progress, but do not define test cases, test scenarios or test acceptance criteria (owned by Test Engineering / relevant technical owners) Scope boundaries - Does not own unit-level testing or qualification (owned by project leads / technical owners) - Does not own documentation updates resulting from future design changes (owned by designers); this role's build documentation, including Production documentation, reflects as-built execution only - Does not define system functional requirements or system test definitions, including test cases, scenarios or acceptance criteria (owned by systems engineers / test engineers) WHAT WE'RE LOOKING FOR Must haves: - Broad, hands-on technical depth across mechanical, electronics, RF and software domains, with deep expertise in at least one area and the ability to engage effectively and make sound decisions in the others - Proven track record planning and executing hardware build, integration and test (AIT) campaigns for complex electromechanical or electronic systems, ideally satellites or other high-reliability aerospace/defence hardware - Strong understanding of configuration management and parts traceability, and comfort owning build documentation and build records end to end - Experience managing a build or AIT team, including day-to-day task planning and hands-on participation in build execution - Ability to plan and hold a realistic AIT schedule across build, qualification (QM) and flight (FM) units, coordinating with test engineering, and systems engineering - Systematic, first-principles approach to build and integration problems, comfortable working across mechanical, electrical and software interfaces - Clear written and verbal communication, able to turn build lessons learned into structured, actionable feedback for designers - Maintain strong interpersonal connections and a collaborative spirit, bringing a steady presence to fast-paced or high-pressure environments. - Excel at building positive workplace relationships and navigating high-stress situations with composure and a collaborative mindset. Nice to haves: - Experience with SIGINT, SAR or other RF/payload satellite systems - Prior people management experience, or clear readiness to grow into a team lead role - Familiarity with system-level test activities such as functional tests, SLC (System Level Checks) or Mock Ops GROWTH PATH This role starts hands-on. In the first phase, you'll share the responsibilities described above with the Testing Team Lead while you build context on our systems, processes and team. As you grow into the role, you'll take it on more independently, owning AIT planning, build execution and team management end to end. Over time, the role is expected to evolve toward team leadership, potentially leading the build team directly. Even so, you'll stay hands-on with build execution and technical problem-solving rather than moving fully into management. APPLICATION PROCESS 1. Talent Acquisition screening 2. Hiring Manager interview 3. Take-home task and panel interview 4. (on-site) Technical / systems discussion with the SIGINT Testing Team 5. (on-site) Behavioural interview to assess cultural fit WORKING AT ICEYE At ICEYE, you'll join a diverse and highly engaged team united by the ambition to make the impossible possible. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. Your growth, wellbeing and success are a priority, with continuous professional development, training opportunities and a culture where collaboration is how we win. How We Work (Our Values) - Make the impossible possible: We set ambitious goals and stay calm under pressure. We bring grit, optimism and ownership when things get hard, and we keep moving until we find a way. - Be curious: Go deep, ask questions, listen carefully and think critically. Understand the "why" behind decisions. - See the big picture: Stay close to what's happening across the company so you can make better decisions. Consider how your work affects others. - Drive effective teamwork: Create psychological safety, invite different perspectives and build inclusive teams. There are no bad questions. - Act as one team: We win together. We match tasks to the right owner and stay agile as priorities shift. - Have fun: What we do matters, and it should be enjoyable. Celebrate progress, take pride in results and share the wins. Benefits Our benefits are designed to support your health and wellbeing, at work and beyond. We keep improving them based on employee feedback, and offerings vary by location. Talent Acquisition will confirm what applies for this role and location during the process. Our Commitment to Diversity, Equity, and Inclusion We want ICEYE to be a place where people can be themselves and do great work. Different backgrounds and perspectives make us stronger, which is why we work to create an environment where people feel included, respected and able to speak up. Whatever your background, we want you to bring your authentic self to the table. We're committed to fair, inclusive hiring and equal opportunity. Everyone is welcome to apply. If you need any adjustments or support during the recruitment process, tell us, we'll do our best to help. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com.

Location: Mississauga, Ontario , Canada ClinChoice is a global full-service CRO committed to professional growth and a quality-driven “one-team” culture. We are seeking a Junior Statistical Programmer to join our in-house team and support projects across a diverse client portfolio, including pharmaceutical, biotechnology, medical device, and consumer health companies of varying sizes. The Junior Statistical Programmer is a delivery-focused role supporting clinical trial programming activities under the guidance and supervision of experienced Statistical Programmers and Programming Team Leaders. The individual will contribute to the development, validation, and maintenance of statistical programming deliverables and gain hands-on experience in clinical trial data and industry standards. The role requires a strong foundation in statistical programming, attention to detail, willingness to learn, and the ability to work effectively within a collaborative team environment. Responsibilities Programming for Clinical Trials Support the development and validation of datasets, tables, figures, and listings for clinical trials. Perform programming activities using SAS and/or R under appropriate guidance and review. Assist with processing and integrating data from internal and external sources. Support ad hoc analyses and programming activities for clinical development and other Research & Development functions. Assist with the development, review, and maintenance of programming specifications and documentation. Contribute to the development and review of SDTM and ADaM datasets and specifications . Support the preparation and review of Define-XML and other clinical trial documentation. Work closely with Senior Statistical Programmers, Biostatisticians, Data Managers, and other cross-functional team members. Electronic Submissions Support the programming and validation of CDISC-compliant datasets and deliverables for regulatory submissions. Assist with the preparation of supporting documentation for electronic submissions. Ensure programming outputs follow applicable standards, specifications, and quality requirements. Quality and Validation Perform programming validation and quality checks according to established procedures. Identify, document, and resolve programming issues in collaboration with senior team members. Ensure assigned deliverables are completed accurately and within agreed timelines. Standards and Guidelines Follow departmental programming standards, working instructions, and applicable industry guidelines. Develop knowledge of CDISC standards, including SDTM and ADaM . Assist in maintaining and improving programming macros, utilities, and reusable functions. Qualification & Experience Bachelor's or Master's degree in Computer Science, Statistics, Mathematics, Engineering, Life Sciences, or a related discipline . 0–2 years of experience in statistical programming, preferably within the pharmaceutical, biotechnology, CRO, or clinical research industry. Basic to intermediate knowledge of SAS and/or R . Familiarity with SAS programming and SAS Macro language is preferred. Basic understanding of clinical trial data and the drug development process . Knowledge or exposure to CDISC standards, SDTM, and ADaM is preferred. Familiarity with clinical trial datasets, tables, figures, and listings is an advantage. Strong attention to detail and commitment to data quality. Ability to work effectively in a team environment and learn from senior team members. Ability to manage assigned tasks and meet project timelines. Open Date: 9/29/2026 Close Date: 11/23/2026 ClinChoice Canada Inc. is proud to be an equal opportunity employer, valuing and respecting diversity.  We are committed to inclusive, barrier-free recruitment and selection processes. We will accommodate the needs of qualified applicants under the Human Rights Code and the Accessibility for Ontarians Disabilities Act, in all aspects of the hiring process, upon request by calling + 1 (647)724-5709 x 301. We thank all applicants for their interest; however, only those being considered for an interview will be contacted. In accordance with Federal Personal Information Protection and Electronic Documents Act ("PIPEDA") , personal information is collected under the authority of the Act and will only be used for candidate selection. #LI-TT1 #LI-Remote #LI-Junior #Permanent The base salary pay range represents the anticipated low and high range for this position. Actual salary will vary based on various factors such as the candidate’s qualifications, skills, competencies, and proficiency for the role. Canada Pay Range $60,000 — $70,000 CAD

Location: Israel; Portugal; Poland Workplace: remote About airSlate airSlate is a global SaaS technology company that develops no-code workflow automation, electronic signature, and document management solutions. Our award-winning products - SignNow, pdfFiller, DocHub, altaFlow, Instapage, and US Legal Forms - serve over hundreds of millions of users and more than one million customers worldwide, helping organizations of every size digitize processes, improve efficiency, and transform how they work.   We’re in an exciting phase of growth and transformation, with teammates in more than 20 countries across three continents and main hubs in the United States, Poland, Ukraine and Philippines.  At airSlate, we’re building value for customers and a culture where growth and innovation go hand in hand. We’re looking for people eager to shape products, scale a company, and thrive in a fast-moving environment. About SignNow team: We are a passionate and ambitious team of 140+ people on a mission to succeed with our award-winning signature solution – SignNow. SignNow empowers over 28 million people at companies across the world to move fast with everything they need to send and eSign their documents. Increase productivity with document workflows, impress customers, and save money while maximizing ROI with SignNow. And now, we are looking for a Senior Content Manager who is prepared to contribute to the next chapter of our company's growth. The person will join the SignNow Product Marketing team and take on the responsibility of creating and managing content across the funnel, including the website, blog, email, sales collateral, and social, to support product launches, GTM campaigns, and sales enablement. As Senior Content Manager, you will own content end to end, from brief to production, publishing, and optimization, working closely with the Principal Product Marketing Manager with direct line of sight into product strategy and launches. What you'll be working on: Create and execute content strategy: decide what we do, why, and what result we expect Own content across its full lifecycle: brief, production, publishing, optimization, and performance review Partner with Product Marketing, Design, Sales, and Customer Success to deliver content for product launches, GTM campaigns, and sales enablement Optimize content based on performance data such as organic traffic, engagement, CTA conversion, and search visibility Keep messaging consistent across all channels and formats, and fix drift when it appears Use analytics tools such as GA4 and Ahrefs to understand what works, what doesn't, and why, and act on the findings Evaluate and adopt new content technologies and platforms that improve quality or speed Use AI writing tools (e.g., ChatGPT, Claude) as a deliberate part of your workflow for ideation, drafting, and iteration, applying editorial judgment to every output What we expect from you: Proven experience creating content across multiple formats and channels, with a portfolio that shows range and quality Experience in a B2B SaaS environment A solid grasp of SEO fundamentals and conversion-focused writing An understanding of marketing fundamentals, including funnel stages and how content serves each one Technical comfort with CMS platforms and publishing and collaboration tools Structured, integrated use of AI writing tools in your content workflow Excellent English What helps you rock: B2B SaaS experience where your content contributed directly to pipeline, trial activation, or product adoption Experience working with Product Marketing or Product teams on launch content or feature messaging A product marketing background or training A track record of turning content performance data into strategic decisions What we offer   Flexible working environment - Our teams operate across the globe. We value in‑person collaboration in our hubs, but we also embrace remote and hybrid working. You can work from one of our offices in the United States, Poland, Romania or Ukraine, or remotely from many countries.   Competitive compensation and stock options - We offer salaries that reflect local market conditions and experience,  plus a performance-based bonus system and stock options so you share in the company’s growth.   Professional growth and learning - We invest in your development through courses, conferences, and access to learning resources. We encourage career growth and internal mobility, supporting teammates who want to explore new opportunities within airSlate.   Health and well‑being - We provide comprehensive benefits tailored to each country, including health coverage, wellness programmes and access to fitness options. We also dedicate quarterly company-wide Mental Health Days, when everyone takes time off to rest and recharge.   Family‑friendly culture - Family life is part of who we are, and we embrace it in many forms. From flexibility for parents to our airSlate Junior Club for kids, to company-wide family days and our pet-friendly approach, we’re committed to making work and life easier to balance.   Giving back - We support charitable initiatives around the world through the airSlate Care programme. Our current focus includes humanitarian aid in Ukraine and other regions, matching employee donations and supporting causes chosen by our teams.   Open communication - We encourage transparent dialogue at all levels. From team discussions to company-wide Q&A sessions with our CEO, we make sure everyone has the chance to be heard and to influence how we grow.       It is airSlate's policy to comply with all applicable equal employment opportunity laws by making all employment decisions without unlawful regard or consideration of any individual’s race, religion, ethnicity, color, sex, sexual orientation, gender identity or expressions, transgender status, sexual and other reproductive health decisions, marital status, age, national origin, genetic information, ancestry, citizenship, physical or mental disability, veteran or family status or any other basis protected by applicable national, federal, state, provincial or local law. airSlate's policy prohibits unlawful discrimination based on any of these impermissible bases, as well as any bases or grounds protected by applicable law in each jurisdiction. If you need assistance or an accommodation during the application process because of a disability, it is available upon request. airSlate is pleased to provide such assistance and no applicant will be penalized as a result of such a request. Pursuant to relevant law, where applicable, airSlate will consider for employment qualified applicants with arrest and conviction records.   Read our Recruitment Privacy Notice to Learn how we process your personal information.

Location: Israel; Bucharest; Poland; Portugal; United Kingdom Workplace: remote About airSlate airSlate is a global SaaS technology company that develops no-code workflow automation, electronic signature, and document management solutions. Our award-winning products - SignNow, pdfFiller, DocHub, altaFlow, Instapage, and US Legal Forms - serve over hundreds of millions of users and more than one million customers worldwide, helping organizations of every size digitize processes, improve efficiency, and transform how they work.   We’re in an exciting phase of growth and transformation, with teammates in more than 20 countries across three continents and main hubs in the United States, Poland, Ukraine and Philippines.  At airSlate, we’re building value for customers and a culture where growth and innovation go hand in hand. We’re looking for people eager to shape products, scale a company, and thrive in a fast-moving environment. About SignNow team: We are a passionate and ambitious team of 140+ people on a mission to succeed with our award-winning signature solution – SignNow. SignNow empowers over 28 million people at companies across the world to move fast with everything they need to send and eSign their documents. Increase productivity with document workflows, impress customers, and save money while maximizing ROI with SignNow. And now, we are looking for a Lifecycle Marketing Manager who is prepared to contribute to the next chapter of our company's growth. The person will join the SignNow Product Marketing team and take on the responsibility of building a dedicated lifecycle and retention marketing function, owning the customer journey from sign-up through activation, conversion, and long-term retention. As Lifecycle Marketing Manager, you will own the lifecycle roadmap from onboarding to win-back, ship the campaigns yourself, and prove their impact on retention and revenue, working directly with the Principal Product Marketing Manager on positioning and product strategy. What you'll be working on: Own the lifecycle marketing roadmap and campaign calendar end to end: strategy, execution, measurement, and iteration Research the market, competitors, and user segments to find opportunities across the funnel Build go-to-market (GTM) plans for new and existing features (launch and feature awareness): who needs to hear about it, what to say, and through which channels across onboarding, in-product, email, and website Create the supporting assets yourself: onboarding flows, in-product messages, website pages, emails, and educational content Translate positioning and messaging into campaigns tailored to each customer segment and journey stage, and test and optimize them based on performance data Define the expected impact of each campaign upfront, then measure it and report on activation, conversion, retention, churn, and LTV Partner with Product on the in-product experience, and with Marketing, Growth, Data, Support, and Customer Success to align lifecycle programs with business goal Use AI tools as a deliberate part of your workflow for segment and cohort analysis, personalization at scale, campaign and copy variants, and journey mapping, with sound judgment on what needs human review What we expect from you: Hands-on product marketing experience : positioning, messaging, personas, and market and competitor research Experience building a go-to-market plan and launching a feature or campaign end to end, including the supporting assets (onboarding flows, in-product messages, website pages, emails, educational content) Proven experience owning a lifecycle marketing roadmap and campaigns at a SaaS company A track record of lifecycle campaigns with measurable revenue impact Ability to explain the “why” behind your campaign choices and the impact you expected , then show how you measured it Deep knowledge of customer segmentation and the levers that drive activation, conversion, and retention at each stage Deep, structured use of AI for segmentation, personalization, and campaign development as part of your everyday work Comfort with product analytics and CRM data (e.g., Google Analytics, Salesforce) Experience implementing a lifecycle or marketing tool and showing a measurable improvement, or a clear case for why we need one Strong written English: you write your own content and edit others’ work What we offer   Flexible working environment - Our teams operate across the globe. We value in‑person collaboration in our hubs, but we also embrace remote and hybrid working. You can work from one of our offices in the United States, Poland, Romania or Ukraine, or remotely from many countries.   Competitive compensation and stock options - We offer salaries that reflect local market conditions and experience,  plus a performance-based bonus system and stock options so you share in the company’s growth.   Professional growth and learning - We invest in your development through courses, conferences, and access to learning resources. We encourage career growth and internal mobility, supporting teammates who want to explore new opportunities within airSlate.   Health and well‑being - We provide comprehensive benefits tailored to each country, including health coverage, wellness programmes and access to fitness options. We also dedicate quarterly company-wide Mental Health Days, when everyone takes time off to rest and recharge.   Family‑friendly culture - Family life is part of who we are, and we embrace it in many forms. From flexibility for parents to our airSlate Junior Club for kids, to company-wide family days and our pet-friendly approach, we’re committed to making work and life easier to balance.   Giving back - We support charitable initiatives around the world through the airSlate Care programme. Our current focus includes humanitarian aid in Ukraine and other regions, matching employee donations and supporting causes chosen by our teams.   Open communication - We encourage transparent dialogue at all levels. From team discussions to company-wide Q&A sessions with our CEO, we make sure everyone has the chance to be heard and to influence how we grow.       It is airSlate's policy to comply with all applicable equal employment opportunity laws by making all employment decisions without unlawful regard or consideration of any individual’s race, religion, ethnicity, color, sex, sexual orientation, gender identity or expressions, transgender status, sexual and other reproductive health decisions, marital status, age, national origin, genetic information, ancestry, citizenship, physical or mental disability, veteran or family status or any other basis protected by applicable national, federal, state, provincial or local law. airSlate's policy prohibits unlawful discrimination based on any of these impermissible bases, as well as any bases or grounds protected by applicable law in each jurisdiction. If you need assistance or an accommodation during the application process because of a disability, it is available upon request. airSlate is pleased to provide such assistance and no applicant will be penalized as a result of such a request. Pursuant to relevant law, where applicable, airSlate will consider for employment qualified applicants with arrest and conviction records.   Read our Recruitment Privacy Notice to Learn how we process your personal information.

Location: Intellias Meet your recruiter Sara Abdelaziz Sherif sara.abdelaziz@intellias.com https://www.linkedin.com... Vacancy details Software Engineering Embedded Engineer Senior Cairo, Egypt Hybrid APPLY NOW REFER A FRIEND Drivers of change, it’s your time to pave new ways. Intellias, a leading software provider in the automotive industry, invites you to develop the future of driving. Join the team and create products used by 2 billion people in the world. What project we have for you We are a fast-growing team who are developing innovative microelectronics-based solutions for the use in automotive industry. Our components communicate, measure, regulate and control safety, comfort, powertrain and network functions. Our latest products include: Lighting, LiDAR, Ultrasonic Ranging, Object and Gesture Recognition, Thermal Management, Electronic Fuse Control and SSPs. What you will do Product-oriented development, testing, maintenance and documentation of embedded technical software with the main application areas: Sensor technology: Ultrasonic applications, pressure measurement technology Light control: RGB LED Basic Software Modules such as Boot Loader, Flash driver, COMMStack, and others Implement SW deliverables across all V-model phases (SWE.1–SWE.6): requirements, architecture, detailed design, unit tests, integration tests, and verification Support the development of functionally safe customer solutions by defining development and test requirements in line with ISO 26262 Close cooperation with customers, business lines, hardware/software developers and test managers What you need for this Degree in Electrical/Electronics and Computer Engineering , or an equivalent technical qualification 5-7 years of software and/or system development for embedded systems, preferably in the automotive industry, as well as system-related software development on Windows and Linux systems Strong proficiency in Embedded C Bare metal development Experience with HW, oscilloscope Experience in the ARM Cortex-M environment Knowledge of automotive bus systems (focus on Ethernet , CAN ) and interfaces Methodological knowledge of requirements engineering, software architecture, programming and testing as well as knowledge of the relevant standards ( Automotive Spice, ISO 26262, ISO 21434) and agile software development methods Nice to have: Experience with sensor technology (ultrasonic applications, pressure measurement technology, filter concepts and characteristic curve correction methods), Experience with embedded software component such as BootLoader, Communication drivers, Memory handling drivers, and others. Higher Ethernet stacks  TCP/IP, Lwip,..etc) Experience with SWE.1 – SWE.5 processes What it’s like to work at Intellias At Intellias, where technology takes center stage, people always come before processes. By creating a comfortable atmosphere in our team, we empower individuals to unlock their true potential and achieve extraordinary results. That’s why we offer a range of benefits that support your well-being and charge your professional growth. We are committed to fostering equity, diversity, and inclusion as an equal opportunity employer. All applicants will be considered for employment without discrimination based on race, color, religion, age, gender, nationality, disability, sexual orientation, gender identity or expression, veteran status, or any other characteristic protected by applicable law. We welcome and celebrate the uniqueness of every individual. Join Intellias for a career where your perspectives and contributions are vital to our shared success. Skills Assembler Automotive C++ Linux

Location: Los Angeles, USA Riot Engineers bring deep knowledge of specific technical areas but also value the chance to work in many broader domains. As a Senior Software Engineer, you’ll also dive into projects that focus on team cohesiveness and cross-team objectives. You’ll lead without authority and provide other engineers with a clear illustration of extraordinary engineering. As a Senior Software Engineer on the Riot Client team, you will deliver high-quality technical solutions that improve the player experience across Riot’s out-of-game ecosystem. Riot Client is the fast-evolving desktop software gateway for millions of players to play, discover, and install Riot games, and every single desktop player goes through the Riot Client on their way to experience one of Riot’s games, ensuring their needs, whether they be providing more ways to discover games, engage with Riot’s culture & community, or getting into their game as fast as possible, is the primary goal of the Riot Client team. You’ll contribute hands-on across the software development lifecycle, partnering closely with engineers, product managers, designers, and other cross-functional teammates to build reliable, scalable, and maintainable client capabilities. You will help shape technical direction within your area of ownership, make sound implementation and design decisions, and collaborate with peers across Riot to support game distribution, content, social features, and developer productivity. Through strong engineering practices, thoughtful code reviews, and mentorship of other engineers, your work will help advance the next generation of Riot Client experiences for players and developers. Responsibilities: Develop and maintain desktop application features focusing on web tech, with the ability to integrate with and contribute C++ components Deliver high-quality, scalable, and reliable engineering solutions within your area of ownership, through hands-on contribution and technical design Contribute to technical planning and design discussions, helping evaluate tradeoffs between long-term sustainability and near-term delivery needs Build and apply a strong understanding of the Riot Client’s dependency landscape, partnering with teams to align on technical solutions Work closely with cross-functional partners, including product, production, QA, design, and data insight Level up other engineers through mentorship and technical guidance Required Qualifications: 6+ years of industry experience Bachelor's degree in Computer Science or a related field, or comparable experience in software development Expertise in web technologies (React.js, Node.js) with application level complexity Experience in C++ Experience working with complex code bases Experience of cross-functional collaboration with product, design, and QA Desired Qualifications: Experience of working with desktop applications Experience of working with Electron Experience with build pipelines For this role, you'll find success through craft expertise, a collaborative spirit, and decision-making that prioritizes your fellow Rioters, who are the customers of your work. Being a dedicated fan of games is not necessary for this position! Our Perks: Riot focuses on work/life balance, shown by our open paid time off policy and other perks such as flexible work schedules. We offer medical, dental, and life insurance, parental leave for you, your spouse/domestic partner, and children, and a 401k with company match. Check out our benefits pages for more information. At Riot Games, we put players first . That mission drives every decision in our quest to create games and experiences that make it better to be a player. Whether you’re working directly on a new player-facing experience or you’re supporting the company as a whole, everyone at Riot is part of our mission. And just like in our games, we’re better when we work together. Our goal is to create collaborative teams where you are empowered to bring your unique perspective everyday. If that sounds like the kind of place you want to work, we’re looking forward to your application. It’s our policy to provide equal employment opportunity for all applicants and members of Riot Games, Inc. Riot Games makes reasonable accommodations for handicapped and disabled Rioters and does not unlawfully discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, handicap, veteran status, marital status, criminal history, or any other category protected by applicable federal and state law. We consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with applicable federal, state and local law, including the California Fair Chance Act, the City of Los Angeles Fair Chance Initiative for Hiring Ordinance, the Los Angeles County Fair Chance Ordinance for Employers, the San Francisco Fair Chance Ordinance, and the Washington Fair Chance Act. Per the Los Angeles County Fair Chance Ordinance, the following core duties may create a basis for disqualifying candidates with relevant criminal histories: Safeguarding confidential and sensitive Company data Communication with others, including Rioters and third parties such as vendors, and/or players, including minors Accessing Company assets, secure digital systems, and networks Ensuring a safe interactive environment for players and other Rioters These duties are directly related to essential operations, safety, trust, and compliance obligations within our organization. Please note that job duties may evolve based on business needs and additional responsibilities may be assigned as necessary to maintain operational efficiency and security.

Location: Itasca, TX Project Assistant Location: Itasca, TX Employment Type: Full-Time Travel: No Travel Required Support the Teams Building America's Power Infrastructure Behind every successful power infrastructure project is a team that keeps information organized, systems accurate, and operations moving. Project Assistants play an important role in supporting project and regional leadership by coordinating administrative activities, maintaining project information, preparing reports, and helping teams respond quickly to changing business needs. About Michels Power, Inc. Michels Power, Inc. supports America's electrical and communication backbone by delivering comprehensive overhead and underground construction services for 69 kV to 765 kV electric utility systems and fiber networks . As one of the largest private power utility electrical contractors in the United States, Michels Power combines experienced project management and construction management leadership, skilled field construction resources, and an extensive equipment fleet to build transmission and distribution power lines and communication systems from coast to coast. Our comprehensive project oversight ranges from logistics and scheduling to quality assurance and construction. We provide engineering, procurement, and construction ( EPC ) delivery models on complex projects involving transmission lines, substations, structure foundations, heavy civil construction, and horizontal directional drilling. Michels Power is a member of the Michels Family of Companies . Position Overview As a Project Assistant , you will provide administrative and operational support to Michels Power's project management and regional operations teams in Itasca, Texas. You will help keep projects organized and moving forward by supporting job setup, reporting, document preparation, project systems, correspondence, and day-to-day administrative needs. You will serve as a key resource for Associate Project Managers, Project Managers, Regional Managers, and other team members while working across multiple systems and priorities. This position is ideal for an organized, detail-oriented professional who enjoys supporting others, solving problems, and delivering exceptional internal customer service. Success requires strong communication skills, attention to detail, the ability to prioritize competing demands, and the initiative to independently follow tasks through to completion. Key Responsibilities Provide administrative support to project management and regional operations teams. Serve as the primary point of contact for project setup activities within B2W, including emergency job setups as required. Prepare and distribute project reports, correspondence, documents, and other business communications. Generate and maintain reports using COINS, B2W, Power BI, and other applicable systems. Support the administration and organization of Michels Power's SharePoint Online sites. Assist with company initiatives, process improvements, system rollouts, and other operational support activities. Maintain and promote Michels Power's strong safety culture while following applicable health, safety, and environmental policies and procedures. What You'll Do Assist Associate Project Managers, Project Managers, and Regional Managers with daily administrative and clerical responsibilities. Set up new projects and jobs in B2W while ensuring information is complete, accurate, and entered in a timely manner. Respond to occasional emergency job setup requests outside normal business hours, including weekends. Compile project information and generate recurring or ad hoc reports for appropriate team members. Create, review, organize, and distribute emails, letters, reports, and project documentation. Assist with maintaining SharePoint content, project information, and online collaboration resources. Support new company programs, technology initiatives, process changes, and operational rollouts. Coordinate with internal teams to gather information, resolve administrative issues, and keep project-related tasks moving forward. Maintain organized and accurate records while managing multiple requests and deadlines. Why Michels Power, Inc.? We help build, strengthen, and modernize the infrastructure that powers communities across the country. We are family owned and operated. Our steady, strategic growth revolves around a commitment to quality. We invest an average of $5,000 per employee per year in training and career development. We reward hard work and dedication with opportunities to learn, grow, and build a career. We perform challenging, meaningful work that supports essential infrastructure and economic growth. We believe everyone is responsible for promoting safety, regardless of job title. We are part of the Michels Family of Companies, one of North America's largest and most diversified energy and infrastructure contractors. Comprehensive Benefits Package Health Insurance Dental Insurance Life Insurance Flexible Spending Accounts (FSA) Health Savings Account (HSA) Short-Term Disability Insurance Long-Term Disability Insurance 401(k) Retirement Plan Legal Plan Identity Theft Protection and Monitoring Plan Benefits may vary based on position and location. Why You? You like to surround yourself with dedicated, value-driven people. You relish new challenges and evolving technology. You cringe when you hear: “Because that's the way we've always done it.” You like to know your efforts are noticed and appreciated. You want to make your own decisions, but know support is always available. You want to work to make a difference in people's lives. What It Takes High School Diploma or General Education Diploma (GED) and 3-5 years of related administrative experience , or an equivalent combination of education and experience. Strong attention to detail with the ability to organize, prioritize, and manage multiple tasks in a fast-paced environment. Excellent verbal and written communication skills. Strong customer service skills with the ability to effectively support project leaders, operations teams, and other internal stakeholders. Proficiency with Microsoft Office Suite. Ability to learn and effectively utilize business and project systems used for reporting, job setup, and project administration. Experience with B2W, COINS, Power BI, SharePoint Online, or similar business systems is preferred. Experience preparing reports, correspondence, documents, and other professional communications. Ability to work independently while maintaining strong communication and collaboration with the broader team. Ability to respond to emergency business needs and complete occasional weekend job setups with short notice, typically 5-10 times per year . Associate's degree is preferred but not required. Previous customer service experience, either face-to-face or through phone and electronic communications, is preferred. Previous experience within the Michels Family of Companies or the construction, utility, or infrastructure industries is preferred. No travel required. Join a company that powers progress. Be a part of Michels Power, Inc.—where you don't just build projects, you build a career. #LI-AS1 AA/EOE/M/W/Vet/Disability https://www.michels.us/website-user-privacy-policy/

Location: Clarksville, TN Step into the innovative world of LG Electronics. As a global leader in technology, LG Electronics is dedicated to creating innovative solutions for a better life. Our brand promise, 'Life's Good', embodies our commitment to ensuring a happier life for all. We have a rich history spanning over six decades and a global presence in over 290 locations.  Our diverse portfolio includes Home Appliance Solutions, Media Entertainment Solutions, Vehicle Solutions, and Eco Solutions.  Our management philosophy, "Jeong-do Management," embodies our commitment to high ethical standards and transparent operations. Grounded in the principles of 'Customer-Value Creation' and 'People-Oriented Management', these values shape our corporate culture, fostering creativity, diversity, and integrity. At LG, we believe in the power of collective wisdom through an inclusive work environment.  Join us and become a part of a company that is shaping the future of technology.  At LG, we strive to make Life Good for Everyone. Pay $20 per hour Key Responsibilities: Manage the movement of product through the production area Ensure that standard operating procedures and engineering procedures are followed and that all work is done in compliance to ensure maximum quality Assist in leading and developing a high performance team Assist in efforts to increase employee satisfaction and strengthen employee culture Provide effective guidance to achieve the required quality and production goals Ensure that product is in the process at all times. Plan and organize work for efficient operations. Achievement of daily, monthly and annual team targets Promotes a safe working environment and monitors compliance activities to support the safety program Education and Experience: High School diploma or equivalency. Manufacturing experience required 1+ year line lead experiences required Knowledge and skills (general and technical): Ability to meet deadlines and be accountable for quality/quantity Excellent interpersonal and communication skills • Able to work a flexible schedule, including weekday and weekend overtime Benefits Offered Full-Time Employees: No-cost employee premiums for you and your eligible dependents for competitive medical, dental, vision and prescription benefits. Auto enrollment with immediate vesting of competitive company matching contributions in a 401(k) Retirement Savings Plan with several investment options. Generous Paid Time Off program that includes company holidays and a combined bank of paid sick and vacation time. Performance based Short-Term Incentives (varies by role). Access to confidential mental health resources to help you and your loved ones improve your quality of life. Personal fitness goal incentives. Family orientated benefits such as paid parental leave and support for families raising children with learning, social, behavioral challenges, or developmental disabilities. Group Rate Life and Disability Insurance. Benefits Offered Temporary/Contractors: Eligible for the relevant benefit programs offered through our partner agencies. Privacy Notice to California Applicants Applicants who need assistance or a reasonable accommodation during the hiring process may contact our team by phone at: 973-477-7090 or support@lg4me.freshdesk.com. This email and phone number will only reply to accommodation requests and is not intended for general employment inquiries. All qualified applicants will be considered for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. In addition to the above, LG believes that pay transparency is a key part of diversity, equity, and inclusion. Our salary ranges take into account many factors in making compensation decisions including but not limited to skillset, experience, licensure, certifications, internal equity, and other business needs. While we consider geographic pay differentials in final offers, because we operate in many geographies where applicable, the salary range listed may not reflect all geographic differentials applied .

Location: Paris; Amsterdam; Linz; Munich; London; Berlin Workplace: Remote ABOUT MISTRAL Mistral provides full-stack AI solutions: from frontier models to developer tools, applications, and compute. We partner with enterprises tackling the hardest problems across high-stakes industries like finance, manufacturing, defense, healthcare, and the public sector, co-creating customized AI systems that they can run on their terms. We are a dynamic, collaborative team passionate about AI and its potential to transform society. Our diverse workforce thrives in competitive environments and is committed to driving innovation. Our teams are distributed between Europe, North America, Asia and the Middle East. We are creative, low-ego and team-spirited. ABOUT THE JOB Mistral AI is looking for a Domain Expert in crashworthiness simulations to help build AI-accelerated simulation capabilities for industrial engineering. You will work at the intersection of industrial simulation, physics modeling, machine learning, and engineering workflows. Your role is to bring deep solid-mechanics expertise into the design, training, evaluation, and deployment of AI Physics Models for real engineering use cases. This is a hands-on technical role. We are looking for someone who understands industrial structural simulation not only conceptually, but through direct experience with simulation models, solver workflows, data generation, validation, and engineering decision-making. You will work with research, product, and customer-facing teams to ensure that our models are useful against real engineering standards — not only benchmark metrics. Relevant application areas may include automotive crashworthiness, aerospace structures, consumer-electronics drop/reliability, manufacturing, durability/fatigue, and other nonlinear structural mechanics problems. WHAT YOU WILL DO - Work with our research team to define, generate, and iteratively improve simulation datasets for training and evaluating crashworthiness foundation models, balancing coverage of relevant physical scenarios, simulation fidelity, and computational cost. - Design and run high-fidelity simulation campaigns using structural mechanics solvers such as Abaqus, LS-DYNA, Ansys Mechanical, Radioss or equivalent tools. - Define the relevant variation space for training data: geometry, mesh resolution, material behavior, boundary conditions, loading, contact, joints, failure modes, and engineering KPIs. - Build or guide automated pipelines for simulation setup, execution, post-processing, dataset creation, and model evaluation. - Work with research teams to train and evaluate AI models on simulation data, and diagnose failure modes caused by data gaps, poor coverage, numerical artifacts, or model limitations. - Evaluate model outputs against industrial engineering needs, including field-level accuracy, scalar KPIs, deformation modes, load paths, energy absorption, stress/strain fields, failure indicators, uncertainty, and out-of-domain behavior. - Work with industrial customers to understand their simulation workflows and engineering priorities, define use cases and success criteria, and incorporate their feedback into model development and validation. ABOUT YOU - You have deep expertise in crashworthiness, solid mechanics, and structural mechanics, with substantial experience in industrial simulation workflows. - You have a Master’s degree or equivalent technical depth in mechanical engineering, aerospace engineering, civil/structural engineering, computational mechanics, applied physics, or a related field. - You have 4+ years of relevant industrial experience (or PhD +1 years) in domains such as automotive, aerospace, and consumer electronics. - You have hands-on experience with explicit dynamics for crash or impact simulation and understand nonlinear FEM and related topics such as contact, plasticity, structural dynamics, buckling, material modeling, fracture/damage, fatigue, crashworthiness, or durability. - You have direct experience with simulation validation, correlation, model quality, numerical sensitivity, and engineering KPI definition. - You are a strong Python developer who can build and maintain reliable tools for simulation automation, data processing, and model evaluation. You apply sound software engineering practices, including version control with Git, automated testing, code review, and clear documentation. - You have hands-on experience working in Linux and HPC environments, including submitting and monitoring batch jobs, selecting appropriate compute resources, and troubleshooting simulation workflows. You can run simulation campaigns efficiently across a compute cluster. - You are comfortable operating in ambiguous technical environments and turning poorly defined industrial problems into scoped datasets, experiments, metrics, and execution plans. - You communicate clearly with both deep technical experts and non-specialist stakeholders. IT WOULD BE GREAT IF YOU - Have experience applying machine learning, surrogate modeling, reduced-order modeling, optimization, or data-driven methods to simulation problems. - Have contributed to reusable internal tools, open-source code, simulation automation frameworks, or production-quality engineering workflows. - Have experience working directly with industrial customers, product teams, or engineering decision-makers. - Have publications, patents, internal technical leadership, or recognized contributions in engineering, simulation, computational mechanics, or ML-for-physics communities. WHAT WE OFFER We offer a comprehensive benefits package designed to support your well-being, growth, and work-life balance. Benefits vary by country and may include healthcare coverage, parental leave, retirement plans, relocation support, wellness programs, meal and transportation allowances, and other location-specific perks. For the most up-to-date details on benefits available in your location, please refer to our Benefits page https://app.notion.com/p/mistralai/Benefits-at-Mistral-36e6ba59a7fe836b93dd01737fcc27ef?source=copy_link. PRIVACY POLICY Your privacy matters to us. You can learn more about how we handle your personal data in our Applicant Privacy Policy https://legal.mistral.ai/terms/applicant-privacy-policy.

Location: Sofia, Sofiya, Bulgaria About us Constructor Labs is the research arm of Constructor Knowledge, based at Campus Ring 1 in Bremen, Germany. Our work is organized around three units: Knowledge Labs, Cyber Labs and Science Labs. We apply computing, software and robotics research to make scientists, teachers and students more effective, working with institutional partners that include CERN, NUS, Carnegie Mellon and Fraunhofer. Our EdTech practice produces research that runs in production. AI-supported remote proctoring is in use at the Irish Aviation Authority, Princess Nourah University and Saudi Electronic University, and our course delivery platform is used by CERN, EPFL, MariaDB and Acronis. For industry clients, we build tailored BSc, MSc and PhD pipelines, L&D operating models, AI upskilling programmes and customer training systems. Constructor Labs Solutions (CLS) is our client-facing systems integrator for the education and research sector, launching in September 2026. It brings audit and consultancy, content, platform, talent and R&D services together under a single contract, an offer few providers make to education buyers today. Delivery is orchestrated across several Constructor organizations: CUB, Nexford, Nexademy, EBAC, Constructor Labs and Constructor Tech. Our aim is to become the go-to systems integrator for education in EMEA by 2029. The role You will open EMEA markets for Constructor Labs Solutions as a quota-carrying individual contributor. The role rests on an established network among universities, online education providers, EdTech vendors and corporate L&D and research buyers, and on your ability to convert that network into signed engagements. You will work with the marketing and delivery teams to build pipeline, establish the CLS brand and develop a case-study library. Supporting you are a credible research institution, named production references, an existing Constructor and Constructor Tech client base, and delivery capability across five service lines that can be combined into a single proposal. The sales motion is consultative. Engagements typically open with a low-risk paid diagnostic (Technology Landscape Assessment, Curriculum Gap Analysis or Learning Strategy Advisory), which you then convert into a multi-line implementation or managed-service mandate. Initial engagements start at around €150–250K in lifetime value and grow from there. Sales cycles in public higher education run six to twelve months, so you will manage a long-cycle institutional funnel alongside faster corporate L&D deals. Reporting and scope Reports to: Director of Sales & Marketing, Constructor Labs Solutions (shared with the Constructor Labs GM during Phase 1). Level: Director, individual contributor. You will join an established sales team. Territory: EMEA, with initial focus on DACH (Germany, Austria, Switzerland) and the UK and Ireland. Named accounts agreed quarterly. Segments: traditional and online universities, EdTech providers and platform vendors, corporate L&D and corporate academies, research-intensive organizations, and publicly funded research programmes. Portfolio: all five CLS service lines, namely Audit & Consultancy, Content, Platform, Talent and R&D Services. Day-to-day, you will work with the Audit & Consultancy Practice Head on scoping, with Nexademy on content propositions, with Constructor Tech on platform architecture, and with the Labs' principal investigators, who join client conversations to provide subject-matter credibility. Knowing which expert belongs in which conversation is central to the role. What you will do Pipeline generation. Around 70% of your time is spent on outbound activity: your own network, conference presence, sector associations, procurement frameworks and targeted account campaigns, supported by marketing. Reference accounts. Sign the first reference clients in EMEA and develop each one into a published case study, an active sponsor and a source of introductions. Discovery and scoping. Map the client's learning or research operating model and quantify the problem in their own measures: cost per course, time to accreditation, completion rates, time-to-hire, research throughput. Shape a diagnostic that leads to a defined follow-on engagement. Conversion to implementation. Own the transition from paid diagnostic to multi-line mandate, with a target of converting half of all audit engagements. Proposals and bids. Assemble proposals across the five service lines with the practice heads, price them against the finance model and qualify them against margin floors. Lead RFP and framework responses, including public-sector tenders in Germany and the UK. Stakeholder coverage. Engage rectors, deans, CIOs, heads of digital learning, procurement, works councils, CLOs, HR directors and research directors. Maintain at least three engaged contacts on every opportunity above €200K. Partner channel. Recruit and manage regional partners, resellers, agencies and academic networks that extend reach beyond your direct coverage. Quota and forecasting. You carry an annual new-business quota, with quarterly KPIs covering pipeline coverage, audit conversion, average engagement value and blended margin. Maintain weekly pipeline hygiene in the CRM, submit a forecast you can defend, and flag slippage as soon as you see it. Market feedback. Report what EMEA buyers procure and what they decline, and how our pricing compares with Instructure, D2L, Cornerstone and the generalist integrators, so that the service catalogue can be adjusted. External representation. Speak at sector events and contribute to thought leadership alongside our principal investigators, building recognition for CLS among education buyers in your region. Targets and KPIs The role carries a quota set on net-new signed bookings (total contract value) in your territory, with a six-month ramp and a quarterly review: Net-new signed bookings (TCV) Reference clients signed Average engagement value Audit-to-implementation conversion Blended gross margin on signed work New qualified opportunities created Forecast accuracy What you bring Network in the sector. Eight or more years selling into education, research or corporate learning in EMEA, preferably DACH and/or the UK, with decision-maker relationships you can open within the first 90 days. You should be prepared to discuss your top 15 target accounts and the route into each. A closing record in complex services. Consistent achievement against a quota of €1M or more in professional services, consulting, systems integration or enterprise EdTech, covering six-figure deals, multi-stakeholder buying groups and six- to twelve-month cycles. Consultative selling. Experience selling scoped engagements whose deliverables were defined jointly with the client, and fluency in a recognized methodology such as MEDDIC, Challenger or Command of the Message. Domain credibility. The ability to hold a substantive conversation with a pro-vice-chancellor about digitalization, a CLO about competency frameworks or a research director about co-funded projects, together with a working understanding of how universities and research organizations buy: budget cycles, committee approval, procurement frameworks and public tender rules. Comfort in an early-stage unit. Experience building a territory or a new offering from a standing start, and the ability to sell a service catalogue that is still being completed. Languages. Business-fluent German and English . Both are required, since public education buyers in DACH contract in German. Commercial discipline. Rigorous CRM and forecasting practice, and a readiness to qualify out early rather than carry unlikely deals. Professional integrity. You will represent a research institution to universities and public bodies, so commitments made during the sales process must be ones delivery can meet. Nice to have Experience selling into publicly funded research programmes, or EU and national grant-co-funded projects (Horizon Europe, Innovate UK, BMBF). Working knowledge of the LMS/SIS landscape and its incumbents — Instructure, D2L, Cornerstone, Moodle, SAP SuccessFactors. Experience with UK public procurement frameworks (Crown Commercial Service, JISC) or German public tendering (VgV, e-Vergabe). Background in the education practice of a systems integrator, Big Four firm or consultancy. Prior success selling talent, recruitment or academic content services. French, Italian or Dutch as a third language. An existing speaking profile in the education or L&D community. Location and travel Candidates must be based in Europe and hold an existing, unrestricted right to work in their country of residence. Relocation is not offered for this position: the network the role depends on should already be in the market. Preferred bases are Germany, Switzerland, Bulgaria or the UK. The role is remote or hybrid, with regular time in Bremen and at the London commercial hub. Expect travel of up to 40% within EMEA for client meetings, tenders and sector events, plus occasional travel to other Constructor locations. What we offer Base salary and commission , weighted approximately 60/40 at on-target earnings, with accelerators above 100% of quota. The band is competitive for a Director-level individual contributor in DACH or the UK and depends on location and experience. A guaranteed ramp across the first two quarters while the pipeline is built. Commission on margin as well as revenue , so that well-scoped work is rewarded ahead of discounted work. Access to our researchers , including principal investigators, CERN-level data scientists, and education methodologists who will join your client meetings. An existing reference base , including named proctoring and platform deployments. Influence over the offering. As the key commercial voice in these markets, you will shape a service catalogue that is not yet fixed.

Location: London, England, United Kingdom About us Constructor Labs is the research arm of Constructor Knowledge, based at Campus Ring 1 in Bremen, Germany. Our work is organized around three units: Knowledge Labs, Cyber Labs and Science Labs. We apply computing, software and robotics research to make scientists, teachers and students more effective, working with institutional partners that include CERN, NUS, Carnegie Mellon and Fraunhofer. Our EdTech practice produces research that runs in production. AI-supported remote proctoring is in use at the Irish Aviation Authority, Princess Nourah University and Saudi Electronic University, and our course delivery platform is used by CERN, EPFL, MariaDB and Acronis. For industry clients, we build tailored BSc, MSc and PhD pipelines, L&D operating models, AI upskilling programmes and customer training systems. Constructor Labs Solutions (CLS) is our client-facing systems integrator for the education and research sector, launching in September 2026. It brings audit and consultancy, content, platform, talent and R&D services together under a single contract, an offer few providers make to education buyers today. Delivery is orchestrated across several Constructor organizations: CUB, Nexford, Nexademy, EBAC, Constructor Labs and Constructor Tech. Our aim is to become the go-to systems integrator for education in EMEA by 2029. The role You will open EMEA markets for Constructor Labs Solutions as a quota-carrying individual contributor. The role rests on an established network among universities, online education providers, EdTech vendors and corporate L&D and research buyers, and on your ability to convert that network into signed engagements. You will work with the marketing and delivery teams to build pipeline, establish the CLS brand and develop a case-study library. Supporting you are a credible research institution, named production references, an existing Constructor and Constructor Tech client base, and delivery capability across five service lines that can be combined into a single proposal. The sales motion is consultative. Engagements typically open with a low-risk paid diagnostic (Technology Landscape Assessment, Curriculum Gap Analysis or Learning Strategy Advisory), which you then convert into a multi-line implementation or managed-service mandate. Initial engagements start at around €150–250K in lifetime value and grow from there. Sales cycles in public higher education run six to twelve months, so you will manage a long-cycle institutional funnel alongside faster corporate L&D deals. Reporting and scope Reports to: Director of Sales & Marketing, Constructor Labs Solutions (shared with the Constructor Labs GM during Phase 1). Level: Director, individual contributor. You will join an established sales team. Territory: EMEA, with initial focus on DACH (Germany, Austria, Switzerland) and the UK and Ireland. Named accounts agreed quarterly. Segments: traditional and online universities, EdTech providers and platform vendors, corporate L&D and corporate academies, research-intensive organizations, and publicly funded research programmes. Portfolio: all five CLS service lines, namely Audit & Consultancy, Content, Platform, Talent and R&D Services. Day-to-day, you will work with the Audit & Consultancy Practice Head on scoping, with Nexademy on content propositions, with Constructor Tech on platform architecture, and with the Labs' principal investigators, who join client conversations to provide subject-matter credibility. Knowing which expert belongs in which conversation is central to the role. What you will do Pipeline generation. Around 70% of your time is spent on outbound activity: your own network, conference presence, sector associations, procurement frameworks and targeted account campaigns, supported by marketing. Reference accounts. Sign the first reference clients in EMEA and develop each one into a published case study, an active sponsor and a source of introductions. Discovery and scoping. Map the client's learning or research operating model and quantify the problem in their own measures: cost per course, time to accreditation, completion rates, time-to-hire, research throughput. Shape a diagnostic that leads to a defined follow-on engagement. Conversion to implementation. Own the transition from paid diagnostic to multi-line mandate, with a target of converting half of all audit engagements. Proposals and bids. Assemble proposals across the five service lines with the practice heads, price them against the finance model and qualify them against margin floors. Lead RFP and framework responses, including public-sector tenders in Germany and the UK. Stakeholder coverage. Engage rectors, deans, CIOs, heads of digital learning, procurement, works councils, CLOs, HR directors and research directors. Maintain at least three engaged contacts on every opportunity above €200K. Partner channel. Recruit and manage regional partners, resellers, agencies and academic networks that extend reach beyond your direct coverage. Quota and forecasting. You carry an annual new-business quota, with quarterly KPIs covering pipeline coverage, audit conversion, average engagement value and blended margin. Maintain weekly pipeline hygiene in the CRM, submit a forecast you can defend, and flag slippage as soon as you see it. Market feedback. Report what EMEA buyers procure and what they decline, and how our pricing compares with Instructure, D2L, Cornerstone and the generalist integrators, so that the service catalogue can be adjusted. External representation. Speak at sector events and contribute to thought leadership alongside our principal investigators, building recognition for CLS among education buyers in your region. Targets and KPIs The role carries a quota set on net-new signed bookings (total contract value) in your territory, with a six-month ramp and a quarterly review: Net-new signed bookings (TCV) Reference clients signed Average engagement value Audit-to-implementation conversion Blended gross margin on signed work New qualified opportunities created Forecast accuracy What you bring Network in the sector. Eight or more years selling into education, research or corporate learning in EMEA, preferably DACH and/or the UK, with decision-maker relationships you can open within the first 90 days. You should be prepared to discuss your top 15 target accounts and the route into each. A closing record in complex services. Consistent achievement against a quota of €1M or more in professional services, consulting, systems integration or enterprise EdTech, covering six-figure deals, multi-stakeholder buying groups and six- to twelve-month cycles. Consultative selling. Experience selling scoped engagements whose deliverables were defined jointly with the client, and fluency in a recognized methodology such as MEDDIC, Challenger or Command of the Message. Domain credibility. The ability to hold a substantive conversation with a pro-vice-chancellor about digitalization, a CLO about competency frameworks or a research director about co-funded projects, together with a working understanding of how universities and research organizations buy: budget cycles, committee approval, procurement frameworks and public tender rules. Comfort in an early-stage unit. Experience building a territory or a new offering from a standing start, and the ability to sell a service catalogue that is still being completed. Languages. Business-fluent German and English . Both are required, since public education buyers in DACH contract in German. Commercial discipline. Rigorous CRM and forecasting practice, and a readiness to qualify out early rather than carry unlikely deals. Professional integrity. You will represent a research institution to universities and public bodies, so commitments made during the sales process must be ones delivery can meet. Nice to have Experience selling into publicly funded research programmes, or EU and national grant-co-funded projects (Horizon Europe, Innovate UK, BMBF). Working knowledge of the LMS/SIS landscape and its incumbents — Instructure, D2L, Cornerstone, Moodle, SAP SuccessFactors. Experience with UK public procurement frameworks (Crown Commercial Service, JISC) or German public tendering (VgV, e-Vergabe). Background in the education practice of a systems integrator, Big Four firm or consultancy. Prior success selling talent, recruitment or academic content services. French, Italian or Dutch as a third language. An existing speaking profile in the education or L&D community. Location and travel Candidates must be based in Europe and hold an existing, unrestricted right to work in their country of residence. Relocation is not offered for this position: the network the role depends on should already be in the market. Preferred bases are Germany, Switzerland, Bulgaria or the UK. The role is remote or hybrid, with regular time in Bremen and at the London commercial hub. Expect travel of up to 40% within EMEA for client meetings, tenders and sector events, plus occasional travel to other Constructor locations. What we offer Base salary and commission , weighted approximately 60/40 at on-target earnings, with accelerators above 100% of quota. The band is competitive for a Director-level individual contributor in DACH or the UK and depends on location and experience. A guaranteed ramp across the first two quarters while the pipeline is built. Commission on margin as well as revenue , so that well-scoped work is rewarded ahead of discounted work. Access to our researchers , including principal investigators, CERN-level data scientists, and education methodologists who will join your client meetings. An existing reference base , including named proctoring and platform deployments. Influence over the offering. As the key commercial voice in these markets, you will shape a service catalogue that is not yet fixed.

Location: Bremen, Germany About us Constructor Labs is the research arm of Constructor Knowledge, based at Campus Ring 1 in Bremen, Germany. Our work is organized around three units: Knowledge Labs, Cyber Labs and Science Labs. We apply computing, software and robotics research to make scientists, teachers and students more effective, working with institutional partners that include CERN, NUS, Carnegie Mellon and Fraunhofer. Our EdTech practice produces research that runs in production. AI-supported remote proctoring is in use at the Irish Aviation Authority, Princess Nourah University and Saudi Electronic University, and our course delivery platform is used by CERN, EPFL, MariaDB and Acronis. For industry clients, we build tailored BSc, MSc and PhD pipelines, L&D operating models, AI upskilling programmes and customer training systems. Constructor Labs Solutions (CLS) is our client-facing systems integrator for the education and research sector, launching in September 2026. It brings audit and consultancy, content, platform, talent and R&D services together under a single contract, an offer few providers make to education buyers today. Delivery is orchestrated across several Constructor organizations: CUB, Nexford, Nexademy, EBAC, Constructor Labs and Constructor Tech. Our aim is to become the go-to systems integrator for education in EMEA by 2029. The role You will open EMEA markets for Constructor Labs Solutions as a quota-carrying individual contributor. The role rests on an established network among universities, online education providers, EdTech vendors and corporate L&D and research buyers, and on your ability to convert that network into signed engagements. You will work with the marketing and delivery teams to build pipeline, establish the CLS brand and develop a case-study library. Supporting you are a credible research institution, named production references, an existing Constructor and Constructor Tech client base, and delivery capability across five service lines that can be combined into a single proposal. The sales motion is consultative. Engagements typically open with a low-risk paid diagnostic (Technology Landscape Assessment, Curriculum Gap Analysis or Learning Strategy Advisory), which you then convert into a multi-line implementation or managed-service mandate. Initial engagements start at around €150–250K in lifetime value and grow from there. Sales cycles in public higher education run six to twelve months, so you will manage a long-cycle institutional funnel alongside faster corporate L&D deals. Reporting and scope Reports to: Director of Sales & Marketing, Constructor Labs Solutions (shared with the Constructor Labs GM during Phase 1). Level: Director, individual contributor. You will join an established sales team. Territory: EMEA, with initial focus on DACH (Germany, Austria, Switzerland) and the UK and Ireland. Named accounts agreed quarterly. Segments: traditional and online universities, EdTech providers and platform vendors, corporate L&D and corporate academies, research-intensive organizations, and publicly funded research programmes. Portfolio: all five CLS service lines, namely Audit & Consultancy, Content, Platform, Talent and R&D Services. Day-to-day, you will work with the Audit & Consultancy Practice Head on scoping, with Nexademy on content propositions, with Constructor Tech on platform architecture, and with the Labs' principal investigators, who join client conversations to provide subject-matter credibility. Knowing which expert belongs in which conversation is central to the role. What you will do Pipeline generation. Around 70% of your time is spent on outbound activity: your own network, conference presence, sector associations, procurement frameworks and targeted account campaigns, supported by marketing. Reference accounts. Sign the first reference clients in EMEA and develop each one into a published case study, an active sponsor and a source of introductions. Discovery and scoping. Map the client's learning or research operating model and quantify the problem in their own measures: cost per course, time to accreditation, completion rates, time-to-hire, research throughput. Shape a diagnostic that leads to a defined follow-on engagement. Conversion to implementation. Own the transition from paid diagnostic to multi-line mandate, with a target of converting half of all audit engagements. Proposals and bids. Assemble proposals across the five service lines with the practice heads, price them against the finance model and qualify them against margin floors. Lead RFP and framework responses, including public-sector tenders in Germany and the UK. Stakeholder coverage. Engage rectors, deans, CIOs, heads of digital learning, procurement, works councils, CLOs, HR directors and research directors. Maintain at least three engaged contacts on every opportunity above €200K. Partner channel. Recruit and manage regional partners, resellers, agencies and academic networks that extend reach beyond your direct coverage. Quota and forecasting. You carry an annual new-business quota, with quarterly KPIs covering pipeline coverage, audit conversion, average engagement value and blended margin. Maintain weekly pipeline hygiene in the CRM, submit a forecast you can defend, and flag slippage as soon as you see it. Market feedback. Report what EMEA buyers procure and what they decline, and how our pricing compares with Instructure, D2L, Cornerstone and the generalist integrators, so that the service catalogue can be adjusted. External representation. Speak at sector events and contribute to thought leadership alongside our principal investigators, building recognition for CLS among education buyers in your region. Targets and KPIs The role carries a quota set on net-new signed bookings (total contract value) in your territory, with a six-month ramp and a quarterly review: Net-new signed bookings (TCV) Reference clients signed Average engagement value Audit-to-implementation conversion Blended gross margin on signed work New qualified opportunities created Forecast accuracy What you bring Network in the sector. Eight or more years selling into education, research or corporate learning in EMEA, preferably DACH and/or the UK, with decision-maker relationships you can open within the first 90 days. You should be prepared to discuss your top 15 target accounts and the route into each. A closing record in complex services. Consistent achievement against a quota of €1M or more in professional services, consulting, systems integration or enterprise EdTech, covering six-figure deals, multi-stakeholder buying groups and six- to twelve-month cycles. Consultative selling. Experience selling scoped engagements whose deliverables were defined jointly with the client, and fluency in a recognized methodology such as MEDDIC, Challenger or Command of the Message. Domain credibility. The ability to hold a substantive conversation with a pro-vice-chancellor about digitalization, a CLO about competency frameworks or a research director about co-funded projects, together with a working understanding of how universities and research organizations buy: budget cycles, committee approval, procurement frameworks and public tender rules. Comfort in an early-stage unit. Experience building a territory or a new offering from a standing start, and the ability to sell a service catalogue that is still being completed. Languages. Business-fluent German and English . Both are required, since public education buyers in DACH contract in German. Commercial discipline. Rigorous CRM and forecasting practice, and a readiness to qualify out early rather than carry unlikely deals. Professional integrity. You will represent a research institution to universities and public bodies, so commitments made during the sales process must be ones delivery can meet. Nice to have Experience selling into publicly funded research programmes, or EU and national grant-co-funded projects (Horizon Europe, Innovate UK, BMBF). Working knowledge of the LMS/SIS landscape and its incumbents — Instructure, D2L, Cornerstone, Moodle, SAP SuccessFactors. Experience with UK public procurement frameworks (Crown Commercial Service, JISC) or German public tendering (VgV, e-Vergabe). Background in the education practice of a systems integrator, Big Four firm or consultancy. Prior success selling talent, recruitment or academic content services. French, Italian or Dutch as a third language. An existing speaking profile in the education or L&D community. Location and travel Candidates must be based in Europe and hold an existing, unrestricted right to work in their country of residence. Relocation is not offered for this position: the network the role depends on should already be in the market. Preferred bases are Germany, Switzerland, Bulgaria or the UK. The role is remote or hybrid, with regular time in Bremen and at the London commercial hub. Expect travel of up to 40% within EMEA for client meetings, tenders and sector events, plus occasional travel to other Constructor locations. What we offer Base salary and commission , weighted approximately 60/40 at on-target earnings, with accelerators above 100% of quota. The band is competitive for a Director-level individual contributor in DACH or the UK and depends on location and experience. A guaranteed ramp across the first two quarters while the pipeline is built. Commission on margin as well as revenue , so that well-scoped work is rewarded ahead of discounted work. Access to our researchers , including principal investigators, CERN-level data scientists, and education methodologists who will join your client meetings. An existing reference base , including named proctoring and platform deployments. Influence over the offering. As the key commercial voice in these markets, you will shape a service catalogue that is not yet fixed.

Location: San Francisco, CA About Anthropic Anthropic’s mission is to create reliable, interpretable, and steerable AI systems. We want AI to be safe and beneficial for our users and for society as a whole. Our team is a quickly growing group of committed researchers, engineers, policy experts, and business leaders working together to build beneficial AI systems. About the role Hardware is becoming critical to how AI gets built, and the legal questions are as new as the technology. We're hiring a Commercial Counsel, Hardware to help Anthropic's product teams move fast, build safely, and get the legal calls right. In this role, you'll negotiate a high volume of fast-moving deals for hardware, components, software, and emerging technology procurement needs. This role will also lead multifaceted technology, data, and partnership deals, many of them the first of their kind at Anthropic. You'll be the legal and risk partner that technical and business leaders turn to when they need a fast, practical read on a deal or purchase. You'll clear low risk transactions quickly, spot the ones that deserve a closer look, and build scalable solutions as new complexities come up, all while working alongside Procurement and Finance and Legal colleagues in areas like privacy, IP, and trade. Along the way, you'll also support partnerships with major tech companies, universities, and media organizations, which gives you a view across much of the business. Key responsibilities Negotiate and close a high volume of agreements for hardware and components, including review of embedded firmware and companion software licenses Structure and negotiate complex technology, data, and partnership agreements Track legal and regulatory changes that affect hardware products and components, such as product safety rules and restrictions on foreign-made components, and explain what they mean for our plans Identify trade, export control, sanctions, and supply chain concerns in cross-border sourcing, and work with our national security and compliance teams to resolve them Build and maintain self-serve guidance, templates, and AI-assisted review tools so routine purchases don't wait on Legal Manage outside counsel for specialist questions and overflow volume Cover other technology or hardware transactions on the Legal team as needed Minimum qualifications Hold a law degree (JD, LLB, or equivalent) and meet the local licensing requirements to work as in-house counsel where you'll be based Hands-on experience buying hardware and firmware, components, and software in high volume, fast-paced environments Deep experience leading complex deals, such as technology or data licensing, joint development, or supply partnerships Working knowledge of international supply chains and how sourcing choices (and their associated risks) show up in contracts (lead times, single-source risk, warranties, country of origin, higher risk jurisdictions) Working knowledge of trade and regulatory compliance for hardware, including export controls, sanctions, tariffs and customs Clear, plain communication with scientists, engineers, and operators, so legal risk turns into a decision they can act on A low-ego, "doer" attitude and real interest in taking on work outside your core practice area Intense curiosity about AI and emerging hardware, and a commitment to responsible AI development Preferred qualifications At least 8 years of legal experience in hardware or a closely related technical space, with the judgment to run risk assessments and deals on your own from day one In-house time at a hardware-intensive technology company (such as electronics, industrial automation, or complex devices) while it was scaling quickly Experience supporting product or engineering teams as a dedicated counsel Experience with facilities or on-site vendor services, including the insurance and safety questions An engineering, product, or other technical background Experience using AI tools to speed up your own legal work Role-specific policy: For this role, we expect all staff to be able to work from our San Francisco office at least 3 days a week, though we encourage you to apply even if you might need some flexibility for an interim period of time. The annual compensation range for this role is listed below. For sales roles, the range provided is the role’s On Target Earnings ("OTE") range, meaning that the range includes both the sales commissions/sales bonuses target and annual base salary for the role. Annual Salary: $335,000 — $385,000 USD Logistics Minimum education: Bachelor’s degree or an equivalent combination of education, training, and/or experience Required field of study: A field relevant to the role as demonstrated through coursework, training, or professional experience Minimum years of experience: Years of experience required will correlate with the internal job level requirements for the position Location-based hybrid policy: Currently, we expect all staff to be in one of our offices at least 25% of the time. However, some roles may require more time in our offices. Visa sponsorship: We do sponsor visas! However, we aren't able to successfully sponsor visas for every role and every candidate. But if we make you an offer, we will make every reasonable effort to get you a visa, and we retain an immigration lawyer to help with this. For roles performing work in California: We will consider for employment all qualified applicants, including those with arrest or conviction records or criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the San Francisco Fair Chance Ordinance, the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the Los Angeles County Fair Chance Ordinance for Employers, and the California Fair Chance Act. We encourage you to apply even if you do not believe you meet every single qualification. Not all strong candidates will meet every single qualification as listed.  Research shows that people who identify as being from underrepresented groups are more prone to experiencing imposter syndrome and doubting the strength of their candidacy, so we urge you not to exclude yourself prematurely and to submit an application if you're interested in this work. We think AI systems like the ones we're building have enormous social and ethical implications. We think this makes representation even more important, and we strive to include a range of diverse perspectives on our team. Your safety matters to us. To protect yourself from potential scams, remember that Anthropic recruiters only contact you from @anthropic.com email addresses. In some cases, we may partner with vetted recruiting agencies who will identify themselves as working on behalf of Anthropic. Be cautious of emails from other domains. Legitimate Anthropic recruiters will never ask for money, fees, or banking information before your first day. If you're ever unsure about a communication, don't click any links—visit anthropic.com/careers directly for confirmed position openings. How we're different We believe that the highest-impact AI research will be big science. At Anthropic we work as a single cohesive team on just a few large-scale research efforts. And we value impact — advancing our long-term goals of steerable, trustworthy AI — rather than work on smaller and more specific puzzles. We view AI research as an empirical science, which has as much in common with physics and biology as with traditional efforts in computer science. We're an extremely collaborative group, and we host frequent research discussions to ensure that we are pursuing the highest-impact work at any given time. As such, we greatly value communication skills. The easiest way to understand our research directions is to read our recent research. This research continues many of the directions our team worked on prior to Anthropic, including: GPT-3, Circuit-Based Interpretability, Multimodal Neurons, Scaling Laws, AI & Compute, Concrete Problems in AI Safety, and Learning from Human Preferences. Come work with us! Anthropic is a public benefit corporation headquartered in San Francisco. We offer competitive compensation and benefits, optional equity donation matching, generous vacation and parental leave, flexible working hours, and a lovely office space in which to collaborate with colleagues. Guidance on Candidates' AI Usage: Learn about our policy for using AI in our application process.

Location: Remote Roles - EMEA; Sliema, Malta Who We Are At OKX, we believe that the future will be reshaped by crypto, and ultimately contribute to every individual's freedom. OKX is a leading crypto exchange, and the developer of OKX Wallet, giving millions access to crypto trading and decentralized crypto applications (dApps). OKX is also a trusted brand by hundreds of large institutions seeking access to crypto markets. We are safe and reliable, backed by our Proof of Reserves. Across our multiple offices globally, we are united by our core principles: We Before Me , Do the Right Thing , and Get Things Done . These shared values drive our culture, shape our processes, and foster a friendly, rewarding, and diverse environment for every OK-er. About the Opportunity We are looking for a Senior or Lead Product Manager to lead the strategy, development, and continuous improvement of our professional trading tools and end-to-end trading experience. This role is focused on products for active and professional traders. The scope includes advanced market analysis, trading workflows, order execution, position and risk management, workspace customisation, and selected automation capabilities. You will develop a deep understanding of how professional traders use leading platforms such as TradingView, 3Commas, Bookmap, ATAS, and Quantower, and translate those insights into a differentiated, reliable, and intuitive trading experience. Experience in the crypto industry is a strong plus. We welcome candidates who have built professional trading products for equities, futures, options, FX, commodities, or other electronic markets. Experience with crypto markets and products is a strong advantage. What You’ll Be Doing Own the product vision, strategy, roadmap, and delivery of professional trading tools and the broader trading experience. Build a deep understanding of active and professional traders, including their daily workflows, trading behaviours, pain points, and expectations. Lead the development and improvement of market analysis, charting, order execution, position management, account monitoring, and workspace customisation. Identify opportunities to introduce advanced trading and automation capabilities that improve efficiency while keeping users in control of their trading decisions. Improve the quality of the end-to-end trading journey, from discovering an opportunity and placing an order through execution, position monitoring, and post-trade review. Ensure the product meets professional standards for performance, stability, accuracy, usability, and transparency, particularly during periods of high market volatility. Conduct structured user research and competitor analysis across professional trading terminals, charting platforms, and trading automation products. Define product success metrics and use customer feedback, behavioural data, and trading data to evaluate performance and guide priorities. Work closely with engineering, design, data, quantitative research, risk, compliance, operations, customer support, and commercial teams. Translate complex trader needs and market concepts into clear product requirements and intuitive user experiences. Manage technical and commercial trade-offs, dependencies, and delivery risks across multiple teams and product areas. Communicate product strategy, priorities, and outcomes clearly to senior stakeholders and distributed teams. Support and mentor other product managers and contribute to the broader trading product strategy What We Look For In You 5-7+ years of product management experience, with a strong track record of delivering complex user-facing products. Meaningful experience building professional trading tools, trading terminals, charting or market-data products, execution products, or trading automation solutions. Relevant experience may come from equities, futures, options, FX, commodities, multi-asset platforms, or crypto. Direct experience at a crypto company is not required. Strong understanding of electronic trading workflows, including market data, order placement and execution, position management, margin, P&L, and risk controls. Familiarity with leading professional trading products such as TradingView, 3Commas, Bookmap, ATAS, Quantower, or comparable platforms. A strong understanding of the needs of active traders and the ability to simplify sophisticated trading workflows without removing essential control or flexibility. Experience owning the full product lifecycle, including research, strategy, prioritisation, requirements, delivery, launch, measurement, and iteration. Strong product judgement and the ability to balance customer value, usability, technical complexity, business impact, operational risk, and regulatory requirements. Demonstrated ability to use qualitative research and quantitative data to make product decisions. Experience working closely with engineering and design teams on real-time, data-intensive, or high-performance products. Strong cross-functional leadership and the ability to influence teams and senior stakeholders without relying on formal authority. Ability to operate independently, manage ambiguity, and deliver results in a fast-moving, remote-friendly environment. Excellent written and spoken English. English is the working language for meetings, documentation, and daily collaboration. Nice to Haves Experience with crypto spot, perpetual futures, options, CEX, DEX, or on-chain trading products. Hands-on familiarity with professional trading platforms or experience as an active trader. Experience with advanced trading features, algorithmic execution, trading automation, or exchange connectivity. Experience building products across web, desktop, and mobile trading environments. Knowledge of exchange APIs, real-time market-data infrastructure, or broker and exchange integrations. A technical, quantitative, engineering, economics, finance, or mathematics background. Perks & Benefits Competitive total compensation package L&D programs and Education subsidy for employees' growth and development Various team building programs and company events Wellness and meal allowances Comprehensive healthcare schemes for employees and dependants More that we love to tell you along the process! Notice: All official OKX vacancies are published on this website. While roles may appear on selected third-party platforms from time to time, information on other sites may be inaccurate or outdated. If in doubt, please apply directly through our official careers website. Information collected and processed as part of the recruitment process of any job application you choose to submit is subject to OKX 's Candidate Privacy Notice .

Location: Clarksville, TN Step into the innovative world of LG Electronics. As a global leader in technology, LG Electronics is dedicated to creating innovative solutions for a better life. Our brand promise, 'Life's Good', embodies our commitment to ensuring a happier life for all. We have a rich history spanning over six decades and a global presence in over 290 locations.  Our diverse portfolio includes Home Appliance Solutions, Media Entertainment Solutions, Vehicle Solutions, and Eco Solutions.  Our management philosophy, "Jeong-do Management," embodies our commitment to high ethical standards and transparent operations. Grounded in the principles of 'Customer-Value Creation' and 'People-Oriented Management', these values shape our corporate culture, fostering creativity, diversity, and integrity. At LG, we believe in the power of collective wisdom through an inclusive work environment.  Join us and become a part of a company that is shaping the future of technology.  At LG, we strive to make Life Good for Everyone. $67,000 Annually Responsibilities: '• Designs and revises for OQC inspections and new model test manuals Decides the shipment of products to check OQC inspection results Decides the new model approvals to check DQA inspection results Collects and analyzes production samples to evaluate quality Analyzes quality control test results and provides feedback and interpretations to production management or staff Stops production if serious product defects are present Monitors performance of quality control systems to ensure effectiveness and efficiency Qualifications: -• 2+ years of outgoing quality assurance experience 2+ year of development quality assurance experience CQE(Certified Quality Engineer),CRE (Certified Reliability Engineer), 6 Sigma Belt preferred Benefits Offered Full-Time Employees: No-cost employee premiums for you and your eligible dependents for competitive medical, dental, vision and prescription benefits. Auto enrollment with immediate vesting of competitive company matching contributions in a 401(k) Retirement Savings Plan with several investment options. Generous Paid Time Off program that includes company holidays and a combined bank of paid sick and vacation time. Performance based Short-Term Incentives (varies by role). Access to confidential mental health resources to help you and your loved ones improve your quality of life. Personal fitness goal incentives. Family orientated benefits such as paid parental leave and support for families raising children with learning, social, behavioral challenges, or developmental disabilities. Group Rate Life and Disability Insurance. Benefits Offered Temporary/Contractors: Eligible for the relevant benefit programs offered through our partner agencies. Privacy Notice to California Applicants Applicants who need assistance or a reasonable accommodation during the hiring process may contact our team by phone at: 973-477-7090 or support@lg4me.freshdesk.com. This email and phone number will only reply to accommodation requests and is not intended for general employment inquiries. All qualified applicants will be considered for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. In addition to the above, LG believes that pay transparency is a key part of diversity, equity, and inclusion. Our salary ranges take into account many factors in making compensation decisions including but not limited to skillset, experience, licensure, certifications, internal equity, and other business needs. While we consider geographic pay differentials in final offers, because we operate in many geographies where applicable, the salary range listed may not reflect all geographic differentials applied .

Location: Riga, Latvia Workplace: hybrid About the Client Our client is an international electronic money institution that provides comprehensive online payment processing solutions. They cater to online businesses across various sectors, offering support for multiple currencies and payment methods. Role Overview As an Account Manager, you will have the opportunity to manage a diverse portfolio of B2B merchants, ensuring long-term retention and satisfaction. This role offers the chance to drive growth through upselling and cross-selling initiatives and collaborate with internal teams to deliver seamless payment solutions. Key Responsibilities Manage a portfolio of existing B2B merchants, ensuring strong relationships, high client satisfaction, and long-term retention. Monitor payment performance metrics such as approval rate, conversion rate, and transaction volumes, identifying trends and potential issues. Analyze transaction data and recommend improvements in payment methods, geographies, or technical settings to increase performance. Drive upsell and cross-sell initiatives by introducing additional payment methods, markets, or company products. Collaborate with internal teams to ensure seamless integration and support for client-specific payment solutions. Conduct regular business reviews with key clients to discuss performance, challenges, and opportunities for growth. Requirements 1+ years of experience in Account Management, Key Account Management, Business Development, or Customer Success roles. Strong background in fintech, payments, acquiring, PSP, or related financial technology environments. Solid understanding of merchant lifecycle, payment flows, and transaction performance metrics. Fluent Russian and strong English (B2+/C1); the role involves communication with international clients and internal teams. Experience with CRM tools and analytics software to track and report on account performance. Proven ability to manage complex client relationships and deliver tailored payment solutions. Languages: English B2, Russian C1. Experience in fintech. Key Soft Skills Strong organisational skills and ability to manage multiple accounts simultaneously. Proactive and results-oriented mindset focused on revenue growth. Ability to prioritise tasks in a fast-moving environment. Excellent communication skills for effective client interactions. Strong problem-solving abilities to address client needs. What We Offer Competitive salary aligned with experience Collaborative and transparent team culture High-impact role in a scaling fintech company Recognition of personal milestones and achievements Social benefits