Вакансии

Location: Montreal, Canada ROLE OVERVIEW: Working on interfaces and interactions between the Payload and the rest of the Satellite (Platform) at system level, during design, AI&T;, and in-orbit operations. Daily coordination with Payload, C&DH; OBDH, Satellite Operations, FSW, FDIR teams. Responsible for all interface control documents (ICDs). KEY REQUIREMENTS: - 7+ years systems engineering at satellite level for telecom satellites (ideally digital payload) - Sub-system experience in 1+ of: Communication Payload, FSW, C&DH;, FDIR, Satellite Operations - Ability to coordinate payload-related satellite tests in AI&T; - Experience in phases B/C/D/E of space programs - Owns/produces Mechanical and Electrical ICDs - Excellent coordination and interpersonal skills - 50%+ on-site in Montreal

Location: Canada Role overview: We are seeking a Spacecraft EMC Systems Engineer for its high-performance spacecraft for our remote sensing and communications satellites. The Spacecraft EMC Systems Engineer will own the EMC concept, analysis, verification and mitigation for multiple satellite programmes, driving architecture decisions, leading cross-disciplinary teams. He will ensure all electrical-subsystem on the bus and payload, from requirements capture to hardware design, do not interfere with themselves or launch vehicles. The role works closely with platform and payload teams to ensure an electrically clean, reliable and launch-ready spacecraft. Tasks summary: EMC Architecture Concept & Requirements • Capture, allocate and trace EMC functional, performance, and requirements. • Define the EMC architecture (shielding strategy, grounding scheme, antenna placement, mode-control, and harness segregation requirements & routing constraints). EMC Analysis & Electrical Design • Perform EMC analyses of the whole spacecraft (accounting for the payload specifics) for radiated/conducted emission and susceptibility, antenna coupling, shielding effectiveness, fuse blowing…etc. and verify compliance early in the design cycle. • Recommend mitigation such as shielding, filtering, grounding schemes, layout rules. DC Power Distribution • Review DC power distribution architecture (primary bus, secondary bus lines, converters, fusing, protection) for EMC/EMI aspects. • Review conductors, termination, connectors and back shells (material, gauge, shielding…etc.) that satisfy EMI control requirements. Cross‑Functional Coordination, Stakeholder & Program Interaction • Communicate technical status, risk assessments and trade‑study results to senior management and/or customers or partners. • Support ICDs with payload and platform teams and suppliers. • Act as the EMC authority in System and subsystem design reviews • Liaise with RF, Power, Structures, Propulsion, Software and Ground-Segment teams to resolve cross-disciplinary EMC issues early. • Support B&P (Phase 0 & pre-Phase A). Integration & Verification (IVV) • Author the EMC Verification Master Plan covering component level, subsystem level and full spacecraft tests (CE/CS, RE/RS). • Oversee test-facility set-up, instrumentation calibration, test execution, data reduction and results certification. • Author test procedures, and acceptance criteria. • Lead CE/CS tests, RE/RS tests on hardware and review suppliers test results. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns and provide EMC training sessions. • Act as technical liaison with customers, partners and external vendors. • Act as Continuous Improvement stakeholder. • Contribute to Client’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Participate in Change Control Boards (CCB) and ensure impact analyses are performed for any electrical change. • Maintain GDIR and EDTS streamlining. • Ensure all artefacts, analysis and documentations are version controlled in PLM environment. • Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation. On‑Orbit & Operations Support • Support root‑cause investigations for on‑orbit anomalies; update design baselines and lessons‑learned. • Support SOOH development and associated operator training. Required Qualifications: • B.Sc. in Electrical Engineering, Aerospace or Physics, (M.Sc. preferred) with 10 + years of electrical design engineering experience on LEO/MEO/GEO missions. • Proficiency in spacecraft and unit EMC requirements and simulations. • Prior experience supervising a team of EMC engineers or leading multi-disciplinary task-forces. • Strong understanding of aerospace system engineering fundamentals • Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. • Experience with Confluence and JIRA. • Demonstrated capability to efficiently work with little to no supervision. • Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. • Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Canada Role overview: We are seeking an experienced Electrical Power System Engineer to support the concept, detailed design, analysis, verification and integration of electrical power subsystems (solar arrays, power-conditioning units, batteries, distribution & regulation) for our current and next-generation remote sensing and communications satellites. The role works closely with payload, bus, thermal, structural and mission-systems multidisciplinary teams responsible for delivering high-performance, reliable EPS solutions to commercial, government, and defense customers. Tasks summary: Architecture Concept & Requirements • Define EPS architecture (generation, storage, distribution) that satisfies mission power budget, mass, volume and reliability constraints. • Perform trade-studies (e.g., solar cell type, battery chemistry, regulator topology). • Generate system requirements, functional flow block diagrams. • Develop the Interface Control Documents (ICD) and Design Description. • Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Detailed Design & Analysis • Size solar arrays, power-conditioning units, battery packs, and power distribution units. • Build and validate high-fidelity electrical models for satellite modes, FMECA, Fault detection… • Conduct & maintain power budget models, load-flow, thermal-power coupling, and survivability analyses (e.g., eclipse, safe-mode, fault-tolerant). Cross‑Functional Coordination, Stakeholder & Program Interaction • Present technical status, risk analyses, and trade‑study results to senior management. • Interface with spacecraft bus teams (power, thermal, structure, avionics). • Develop/maintain high-fidelity power models for mission analysis (e.g., orbit raising, station-keeping, de-orbit). • Develop tools for power efficiency & optimisation for the satellite. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) • Author verification plans, test matrices, and validation procedures for unit & EPS subsystem tests. • Support ground-test & integration campaigns, fueling, thermal vacuum, EMI/EMC, and spacecraft-level integration. • Analyse test data, close out anomalies, and update design baselines. • Support FSW integration Technical Leadership & Mentorship • Mentor, guide, lead a multidisciplinary team of junior or intermediate system engineers & interns • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to Client's knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Maintain design and safety standards. • Ensure all artefacts, analysis, software, documentations and deliverables are version controlled in PLM environment. • Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation Launch‑Site, On‑Orbit & Operations Support • Support launch‑site interface checklists with LVI responsible engineer, pre‑launch checkout procedures, and early‑orbit checkout scripts. • Provide real‑time engineering support during launch, on‑orbit commissioning, anomaly investigations and contingency operations. • Support SOOH development and associated operator trainings. Required Qualifications: • B.Sc. in Electrical Engineering, Aerospace or Physics with 8 + years of EPS system design experience on LEO/MEO platforms. • Deep knowledge of spacecraft bus subsystems and their interactions. • Experience with power‑electronics design and power management hardware. • Strong understanding of aerospace system engineering fundamentals • Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. • Experience with Confluence and JIRA • Demonstrated capability to efficiently work with little supervision • Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. • Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Canada Role overview: We are seeking a GNC System Engineer for design, integration, verification, and operational support of GNC subsystems for our current and next-generation remote sensing and communications satellites. The role will require to design the complete subsystem, from algorithm development through hardware implementation, verification, and on‑orbit operation support. The role requires deep expertise in orbital dynamics, attitude‑determination & control, plus real‑time FSW definition and integration, and will work closely with subsystem and mission operations teams throughout the satellite life-cycle. Tasks summary: Architecture Concept & Requirements • Derive GNC functional, performance, and safety requirements (pointing accuracy, slew rate, orbit‑maintenance ΔV, fault‑tolerance) from mission level requirements. • Produce System Requirements, Interface Control document (ICD), and Description Document. • Perform requirement management and maintain bidirectional traceability throughout the project lifecycle. Modelling & Trade‑Study • Conduct trade studies on sensor suites and actuator families. • Perform high‑fidelity dynamics simulations (Matlab/Simulink, STK) to meet pointing requirements, maintain error budgets, control‑law stability, fuel consumption, and survivability margins. Algorithm Development • Design and implement attitude‑determination algorithms and orbit‑determination solutions. • Develop control laws for 3‑axis stabilization, slew maneuvers, station keeping algorithms • Validate algorithms with Monte‑Carlo analysis, worst‑case scenarios, and support SIL/HIL testing on avionic test bench. Cross‑Functional Coordination, Stakeholder & Program Interaction • Translate algorithms into FSW requirements running on real‑time operating systems. • Collaborate with the C&DH and FSW teams to implement TM/TC, schedulers and FDIR logic for GNC. • Present technical status, risk analyses, and trade‑study results to senior management. • Negotiate and maintain ICDs with subsystems. • Support B&P (Phase 0 & pre-phase A). Hardware Selection & Design • Specify sensor and actuator hardware, perform interface definition (electrical, mechanical, thermal) and conduct trade on redundancy architectures. • Work with structures and thermal engineers to ensure proper mounting, thermal paths, and vibration survivability of GNC hardware aligning with payload requirements. • Review harness routing and power distribution for GNC electronics. Integration & Verification (IVV) • Author Verification Plans, Test Matrices, and Validation Procedures for unit, subsystem, and spacecraft level GNC tests. • Lead functional tests: sensor calibration, actuator command‑response, closed‑loop attitude‑control on testbeds, and on‑orbit checkout sequences. • Conduct failure mode and effects analysis (FMEA), fault tree analysis (FTA), and reliability prediction. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns. • Act as technical liaison with customers, partners and external vendors • Act as Continuous Improvement stakeholder • Contribute to Client’s knowledge‑base, process enhancements, and standards. Configuration, Documentation & Standards Management • Maintain GNC standards (sensor/actuator interface, filter design, control‑law documentation). • Ensure all artefacts, analysis, software, deliverables and documentations are version controlled in PLM environment. • Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation On‑Orbit & Operations Support • Support procedure developments (detumble, orbit‑maintenance, safe‑mode…etc.). • Provide real‑time GNC support during launch, early‑orbit checkout, and contingency events. • Analyse on‑orbit telemetry, update filter parameters, and generate performance reports. • Support SOOH development and associated operator training. Required Qualifications: • B.Sc. in Electrical Engineering, Aerospace or Physics, (M.Sc. preferred), focused on flight dynamics, control theory, or navigation with 10+ of GNC/AOCS experience on LEO/MEO/GEO platforms. • Orbital mechanics, attitude dynamics, and control-law design (classical and modern optimal control). • Proficiency with navigation sensors and actuators. • Experience implementing real-time filtering and control algorithms in embedded code • Strong understanding of aerospace system engineering fundamentals. • Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. • Experience with Confluence and JIRA. • Demonstrated capability to efficiently work with little supervision. • Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. • Demonstrate excellent written and verbal communications skills in English & French work environment.

Location: United States WHAT YOU'LL DO: Process shipping and receiving at the Santa Ana and/or Costa Mesa locations as needed Prepare finished stock for shipment by identifying, pulling, packing, crating, labeling, loading, and securing product Key person to ensure material movement across sites is accurately transacted for each move Ensure orderly production and distribution of products by pulling orders from inventory, delivering production materials and supplies where needed, and staging finished product for final distribution Complete cycle counts and conduct all warehouse activities with inventory accuracy as a top priority Maintain inventory by identifying, labeling, and keeping materials and supplies in stock, recording location of inventory, and reporting shortages Operate forklifts, pallet jacks, and other machinery to move items, or signal machine operators to move materials onto and off trucks and loading docks Courier inventory as needed between Client's sites in Santa Ana & Costa Mesa Expedite flow of material, parts, and assemblies within or between departments in accordance with production and shipping schedules REQUIRED QUALIFICATIONS: 2+ years as a warehouse associate or equivalent role Must be able to work 1st or 2nd shift and overtime as needed Valid driver's license Ability to be onsite, local to Santa Ana, CA or Costa Mesa, CA PREFERRED QUALIFICATIONS: 1+ years forklift experience and license Experience working in the defense/aerospace industry Familiarity with Enterprise Resource Planning (ERP) systems and/or other warehouse management and inventory control tooling. Familiarity with Microsoft Office or equivalent office management tooling Familiarity with Inventory Management through lot/serial/batch tracking Experience packaging and handling hazardous shipments Excellent customer service skills Able to adapt in fast-paced environments Ability to flex as work shifts can be subject to change depending on the business need Ability to prioritize tasks efficiently and effectively Eligibility to obtain and maintain a U.S. clearance Active secret or top secret clearance within the last 5 years

Location: United States Location: Bellevue, Washington, hybrid, 3 days per week on-site. Duration: 6-month W-2 contract with possibility of conversion to full time. About the role: This is an embedded firmware role, not application software. Bare-PCB bring-up to production firmware on 32-bit ARM Cortex-M microcontrollers, in embedded C . The product is built around USB-C Power Delivery controllers . Candidates must understand USB-C / USB-PD: source, sink and dual-role, power contract negotiation, fault handling. Hands-on bench work is mandatory: oscilloscope, logic or protocol analyzer, SWD/JTAG debugger, UART logging, working from datasheets, register tables and schematics. Companion-IC communication over I2C, SPI, UART . Strong plus: Infineon EZ-PD / PMG1 or Cypress CCGx PD controllers, ModusToolbox or STM32Cube, bootloader / DFU work, power-path or regulator firmware (VBUS, OVP/UVP/OCP), USB hubs, DisplayPort Alt Mode, redrivers. Role Description We're bringing up new hardware built around USB-C Power Delivery controllers and are looking for an embedded firmware engineer to help take these boards from bare PCB to working, production-quality firmware. You'll write and debug firmware on 32-bit ARM microcontrollers, configure companion ICs over I2C/SPI/UART, and work hands-on at the bench in collaboration with our hardware team. Job Responsibilities Bring up new PCBs: validate power/clocks, connect a debugger, enable peripherals, and get firmware running on new hardware Develop and debug embedded C firmware on ARM Cortex-M-class MCUs Configure and drive companion ICs over I2C or other peripheral buses Implement and debug USB-C / USB-PD behavior (power negotiation, source/sink roles, fault handling, etc.) Debug at the bench with oscilloscope, protocol/logic analyzer, multimeter, and SWD/JTAG Work from datasheets, register tables, and schematics Document configurations and design decisions Collaborate with hardware engineers to isolate hardware vs. firmware issues Required Skills Strong embedded C on 32-bit MCUs (ARM Cortex-M or similar): interrupts, register-level peripheral work, development under flash/RAM constraints Working understanding of USB-C/USB-PD (source/sink/DRP roles, power contract negotiation) I2C/SPI/UART peripheral/companion-IC communication, configuration, and debug Hands-on hardware bring-up experience: taking a board from power-on to running firmware, or debugging firmware against real hardware Datasheet and schematic literacy: able to configure a part from its register tables and confirm pin/power connections Comfortable with standard bench debug tools: oscilloscope, logic/protocol analyzer, SWD/JTAG debugger, UART logging Git proficiency Preferred Skills Experience with a Cypress/Infineon MCU SDK/IDE and its middleware (e.g. ModusToolbox, STM32Cube, or similar), including creating/customizing a board support package Firmware update/bootloader work (DFU or equivalent): building and flashing update images Power-path or regulator firmware: VBUS control, fault detection/recovery (OVP/UVP/OCP), enable/soft-start sequencing USB subsystem experience: hubs, DisplayPort Alt Mode, redrivers/retimers, or billboard devices Nice to have Prior work with Infineon EZ-PD / PMG1 (or Cypress CCGx) PD controllers and ModusToolbox CI for embedded builds USB-IF PD compliance/USB-C requirements familiarity

Location: Costa Mesa, United States; Santa Ana, United States 📍 Location: Santa Ana / Costa Mesa, CA 📄 Employment Type: 6-Month Contract, with potential for conversion to full-time 🏢 Work Arrangement: On-site 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Important Screening Requirements Must be a U.S. Citizen . Must have a valid driver's license . Must be able to work 1st or 2nd shift , including overtime as needed. Must be able to work on-site in Santa Ana or Costa Mesa, CA ; local candidates are preferred. Must be able to lift up to 50 lbs. Must be comfortable using a computer to enter inventory transactions and communicate through tools such as Slack . Must have proficient spoken and written English . Must be willing to work a flexible schedule , as shifts may change based on business needs. Must be eligible to obtain and maintain a U.S. security clearance ; an active Secret or Top Secret clearance within the last five years is preferred. About the Role We are seeking Materials Associates to join a high-volume warehouse and materials team supporting operations across the Santa Ana and Costa Mesa locations. This role is responsible for the movement, organization, tracking, and shipment of materials, parts, assemblies, and finished products. The ideal candidate is not simply an experienced warehouse operator but someone who is reliable, detail-oriented, curious, and comfortable identifying ways to improve processes . You will work across shipping and receiving, inventory control, material movement, production support, and warehouse operations while maintaining a strong focus on inventory accuracy and timely material flow . What We’re Looking For We’re looking for someone who can combine hands-on warehouse experience with strong attention to detail and critical thinking . Experience with inventory control, cycle counting, WMS/ERP systems, or lot/serial/batch tracking is highly valuable. The team values candidates who are adaptable, dependable, comfortable learning new systems, and willing to question and improve existing processes . Key Responsibilities Process shipping and receiving activities at the Santa Ana and/or Costa Mesa locations as needed. Prepare finished stock for shipment by: Identifying and pulling products Packing and crating materials Labeling shipments Loading and securing products Accurately transact the movement of materials between company sites. Pull orders from inventory and deliver production materials and supplies where needed. Stage finished products for final distribution. Complete cycle counts and other warehouse activities with inventory accuracy as a top priority. Maintain inventory by identifying and labeling materials and supplies. Record and maintain accurate inventory locations. Identify and report inventory shortages. Operate forklifts, pallet jacks, and other material-handling equipment as applicable. Move materials onto and off trucks and loading docks. Courier inventory between the Santa Ana and Costa Mesa locations as needed. Expedite the movement of materials, parts, and assemblies within or between departments based on production and shipping schedules. Support a fast-paced warehouse environment while maintaining accuracy, safety, and organization. Required Qualifications 2+ years of experience as a warehouse associate or in an equivalent role. Valid driver's license . Ability to work 1st or 2nd shift and overtime as needed. Ability to work on-site in Santa Ana or Costa Mesa, CA . Ability to lift up to 50 lbs. Comfortable working with computers and entering inventory transactions. Strong attention to detail and commitment to inventory accuracy. Strong communication and organizational skills. Ability to adapt to a fast-paced environment. Ability to prioritize tasks efficiently and effectively. Preferred Qualifications 1+ year of forklift experience and forklift certification/license. Experience working in the defense or aerospace industry . Experience with ERP systems, WMS, or inventory management platforms . Familiarity with Microsoft Office or similar productivity tools. Experience with lot, serial, or batch tracking . Experience packaging and handling hazardous shipments . Experience with inventory control and cycle counting. Excellent customer service and communication skills. Ability to identify opportunities to improve warehouse and material-flow processes. Active Secret or Top Secret clearance within the last five years. Experience working in environments where priorities and work shifts may change based on business needs. Shift Information 1st Shift: 7:00 AM – 3:30 PM 2nd Shift: 3:00 PM – 11:30 PM 2nd shift is currently the greater need. A Tuesday–Saturday shift is expected to become available shortly. Candidates should be prepared to indicate their preferred shift during the screening process. Screening focus: In addition to warehouse experience, prioritize reliability, critical thinking, curiosity, inventory accuracy, adaptability, and willingness to improve processes .

Location: Costa Mesa, United States We’re looking for Materials Associate - Warehouse to support shipping, receiving, inventory, and material movement across our Santa Ana and Costa Mesa locations. Requirements 2+ years of warehouse or similar experience. Ability to work 1st or 2nd shift and overtime as needed. Valid driver’s license. Must be local to Santa Ana or Costa Mesa, CA and able to work onsite. U.S. Citizenship required. Preferred Qualifications 1+ year of forklift experience and/or forklift certification. Aerospace or defense industry experience. Experience with ERP or warehouse/inventory management systems. Experience with lot, serial, or batch inventory tracking. Experience handling or packaging hazardous shipments. Microsoft Office experience. Strong organization and customer service skills. Ability to work in a fast-paced environment and adapt to changing schedules. Eligibility to obtain and maintain a U.S. security clearance; active Secret or Top Secret clearance within the last 5 years is a plus.

Location: Sainte-Anne-de-Bellevue, Canada Role overview: Our client is seeking a Spacecraft EMC Systems Engineer for its high performance spacecraft for our remote sensing and communications satellites. The Spacecraft EMC Systems Engineer will own the EMC concept, analysis, verification and mitigation for multiple satellite programmes, driving architecture decisions, leading cross disciplinary teams. He will ensure all electrical subsystem on the bus and payload, from requirements capture to hardware design, do not interfere with themselves or launch vehicles. The role works closely with platform and payload teams to ensure an electrically clean, reliable and launch ready spacecraft. Tasks summary: EMC Architecture Concept & Requirements • Capture, allocate and trace EMC functional, performance, and requirements. • Define the EMC architecture (shielding strategy, grounding scheme, antenna placement, mode control, and harness segregation requirements & routing constraints). EMC Analysis & Electrical Design • Perform EMC analyses of the whole spacecraft (accounting for the payload specifics) for radiated/conducted emission and susceptibility, antenna coupling, shielding effectiveness, fuse blowing…etc. and verify compliance early in the design cycle. • Recommend mitigation such as shielding, filtering, grounding schemes, layout rules. DC Power Distribution • Review DC power distribution architecture (primary bus, secondary bus lines, converters, fusing, protection) for EMC/EMI aspects. • Review conductors, termination, connectors and back shells (material, gauge, shielding…etc.) that satisfy EMI control requirements. Cross‑Functional Coordination, Stakeholder & Program Interaction • Communicate technical status, risk assessments and trade‑study results to senior management and/or customers or partners. • Support ICDs with payload and platform teams and suppliers. • Act as the EMC authority in System and subsystem design reviews • Liaise with RF, Power, Structures, Propulsion, Software and Ground Segment teams to resolve cross disciplinary EMC issues early. • Support B&P (Phase 0 & pre-Phase A). Integration & Verification (IVV) • Author the EMC Verification Master Plan covering component level, subsystem level and full spacecraft tests (CE/CS, RE/RS). • Oversee test facility set up, instrumentation calibration, test execution, data reduction and results certification. • Author test procedures, and acceptance criteria. • Lead CE/CS tests, RE/RS tests on hardware and review suppliers test results. Technical Leadership & Mentorship • Mentor, guide junior engineers and interns and provide EMC training sessions. • Act as technical liaison with customers, partners and external vendors. • Act as Continuous Improvement stakeholder. • Contribute to our client’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management • Participate in Change Control Boards (CCB) and ensure impact analyses are performed for any electrical change. • Maintain GDIR and EDTS streamlining. • Ensure all artefacts, analysis and documentations are version controlled in PLM environment. • Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). • Support Technology Road‑Mapping & Innovation. On‑Orbit & Operations Support • Support root‑cause investigations for on‑orbit anomalies; update design baselines and lessons‑learned. • Support SOOH development and associated operator training. Required Qualifications: • B.Sc. in Electrical Engineering, Aerospace or Physics, (M.Sc. preferred) with 10 + years of electrical design engineering experience on LEO/MEO/GEO missions. • Proficiency in spacecraft and unit EMC requirements and simulations. • Prior experience supervising a team of EMC engineers or leading multi disciplinary task forces. • Strong understanding of aerospace system engineering fundamentals • Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. • Experience with Confluence and JIRA. • Demonstrated capability to efficiently work with little to no supervision. • Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. • Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Sainte-Anne-de-Bellevue, Canada Role overview: Our client is seeking an experienced Electrical Power System Engineer to support the concept, detailed design, analysis, verification and integration of electrical power subsystems (solar arrays, power‑conditioning units, batteries, distribution & regulation) for our current and next‑generation remote sensing and communications satellites. The role works closely with payload, bus, thermal, structural and mission‑systems multidisciplinary teams responsible for delivering high‑performance, reliable EPS solutions to commercial, government, and defense customers. Tasks summary: Architecture Concept & Requirements Define EPS architecture (generation, storage, distribution) that satisfies mission power budget, mass, volume and reliability constraints. Perform trade‑studies (e.g., solar cell type, battery chemistry, regulator topology). Generate system requirements, functional flow block diagrams. Develop the Interface Control Documents (ICD) and Design Description. Perform requirement management and maintain bidirectional traceability throughout the program life cycle. Detailed Design & Analysis Size solar arrays, power‑conditioning units, battery packs, and power distribution units. Build and validate high‑fidelity electrical models for satellite modes, FMECA, Fault detection… Conduct & maintain power budget models, load‑flow, thermal‑power coupling, and survivability analyses (e.g., eclipse, safe‑mode, fault‑tolerant). Cross‑Functional Coordination, Stakeholder & Program Interaction Present technical status, risk analyses, and trade‑study results to senior management. Interface with spacecraft bus teams (power, thermal, structure, avionics). Develop/maintain high‑fidelity power models for mission analysis (e.g., orbit raising, station‑keeping, de‑orbit). Develop tools for power efficiency & optimisation for the satellite. • Support B&P (Phase 0 & pre-phase A). Integration & Verification (IVV) Author verification plans, test matrices, and validation procedures for unit & EPS subsystem tests. Support ground‑test & integration campaigns, fueling, thermal vacuum, EMI/EMC, and spacecraft‑level integration. Analyse test data, close out anomalies, and update design baselines. Support FSW integration Technical Leadership & Mentorship Mentor, guide, lead a multidisciplinary team of junior or intermediate system engineers & interns Act as technical liaison with customers, partners and external vendors Act as Continuous Improvement stakeholder Contribute to our client’s knowledge‑base, process enhancements, and standards development. Configuration, Documentation & Standards Management Maintain design and safety standards. Ensure all artefacts, analysis, software, documentations and deliverables are version controlled in PLM environment. Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). Support Technology Road‑Mapping & Innovation Launch‑Site, On‑Orbit & Operations Support Support launch‑site interface checklists with LVI responsible engineer, pre‑launch checkout procedures, and early‑orbit checkout scripts. Provide real‑time engineering support during launch, on‑orbit commissioning, anomaly investigations and contingency operations. Support SOOH development and associated operator trainings. Required Qualifications: B.Sc. in Electrical Engineering, Aerospace or Physics with 8 + years of EPS system design experience on LEO/MEO platforms. Deep knowledge of spacecraft bus subsystems and their interactions. Experience with power‑electronics design and power management hardware. Strong understanding of aerospace system engineering fundamentals Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. Experience with Confluence and JIRA Demonstrated capability to efficiently work with little supervision Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. Demonstrate excellent written and oral communication skills in English; knowledge of French will be considered an asset (Contact with clients outside Quebec and work on deliverables in English).

Location: Sainte-Anne-de-Bellevue, Canada Role overview: Our client is seeking a GNC System Engineer for design, integration, verification, and operational support of GNC subsystems for our current and next‑generation remote sensing and communications satellites. The role will require to design the complete subsystem, from algorithm development through hardware implementation, verification, and on‑orbit operation support. The role requires deep expertise in orbital dynamics, attitude‑determination & control, plus real‑time FSW definition and integration, and will work closely with subsystem and mission operations teams throughout the satellite life‑cycle. Tasks summary: Architecture Concept & Requirements Derive GNC functional, performance, and safety requirements (pointing accuracy, slew rate, orbit‑maintenance ΔV, fault‑tolerance) from mission level requirements. Produce System Requirements, Interface Control document (ICD), and Description Document. Perform requirement management and maintain bidirectional traceability throughout the project lifecycle. Modelling & Trade‑Study Conduct trade studies on sensor suites and actuator families. Perform high‑fidelity dynamics simulations (Matlab/Simulink, STK) to meet pointing requirements, maintain error budgets, control‑law stability, fuel consumption, and survivability margins. Algorithm Development Design and implement attitude‑determination algorithms and orbit‑determination solutions. Develop control laws for 3‑axis stabilization, slew maneuvers, station keeping algorithms Validate algorithms with Monte‑Carlo analysis, worst‑case scenarios, and support SIL/HIL testing on avionic test bench. Cross‑Functional Coordination, Stakeholder & Program Interaction Translate algorithms into FSW requirements running on real‑time operating systems. Collaborate with the C&DH and FSW teams to implement TM/TC, schedulers and FDIR logic for GNC. Present technical status, risk analyses, and trade‑study results to senior management. Negotiate and maintain ICDs with subsystems. Support B&P (Phase 0 & pre-phase A). Hardware Selection & Design Specify sensor and actuator hardware, perform interface definition (electrical, mechanical, thermal) and conduct trade on redundancy architectures. Work with structures and thermal engineers to ensure proper mounting, thermal paths, and vibration survivability of GNC hardware aligning with payload requirements. Review harness routing and power distribution for GNC electronics. Integration & Verification (IVV) Author Verification Plans, Test Matrices, and Validation Procedures for unit, subsystem, and spacecraft level GNC tests. Lead functional tests: sensor calibration, actuator command‑response, closed‑loop attitude‑control on testbeds, and on‑orbit checkout sequences. Conduct failure mode and effects analysis (FMEA), fault tree analysis (FTA), and reliability prediction. Technical Leadership & Mentorship Mentor, guide junior engineers and interns. Act as technical liaison with customers, partners and external vendors Act as Continuous Improvement stakeholder Contribute to our client’s knowledge‑base, process enhancements, and standards. Configuration, Documentation & Standards Management Maintain GNC standards (sensor/actuator interface, filter design, control‑law documentation). • Ensure all artefacts, analysis, software, deliverables and documentations are version controlled in PLM environment. Support design reviews (SRR, PDR, CDR, MRR/TRR…etc.). Support Technology Road‑Mapping & Innovation On‑Orbit & Operations Support Support procedure developments (detumble, orbit‑maintenance, safe‑mode…etc.). Provide real‑time GNC support during launch, early‑orbit checkout, and contingency events. Analyse on‑orbit telemetry, update filter parameters, and generate performance reports. • Support SOOH development and associated operator training. Required Qualifications: B.Sc. in Electrical Engineering, Aerospace or Physics, (M.Sc. preferred), focused on flight dynamics, control theory, or navigation with 10+ of GNC/AOCS experience on LEO/MEO/GEO platforms. Orbital mechanics, attitude dynamics, and control‑law design (classical and modern optimal control). Proficiency with navigation sensors and actuators. Experience implementing real‑time filtering and control algorithms in embedded code Strong understanding of aerospace system engineering fundamentals. • Hands-on individual who can support systems integration processes and capability to test systems and resolve problems. Experience with Confluence and JIRA. • Demonstrated capability to efficiently work with little supervision. • Ability to distill complex problems to fundamentals to solve with analysis, similarity, or creativity. • Demonstrate excellent written and verbal communications skills in English & French work environment.

Location: Costa Mesa, United States WHAT YOU’LL DO • Utilize first principle methods and design tools to develop new aircraft products • Own development of primary and secondary aircraft structural parts and assemblies (metallic and composite) from preliminary design through prototype manufacturing • Perform complex modeling and finite element analysis at the detailed component level, major assembly level, and aircraft level (analysis simulations to include strength, buckling, damage tolerance, and delamination) • Apply design for manufacturing concepts to create solutions that are cost effective and easy to manufacture at rate • Conduct trade studies and perform design and analysis research of complex engineering concepts to determine an optimal solution for weight, performance, manufacturability, cost, and/or schedule • Collaborate in a multidisciplinary environment to solve complex, open-ended problems with an emphasis on schedule and cost objectives • Coordinate work with mechanical systems, systems integration, aerodynamics, manufacturing, project engineering, and other team members • Onsite engineering support at manufacturing and integration sites REQUIRED QUALIFICATIONS • Bachelor's in Aerospace Engineering, Mechanical Engineering, or equivalent experience • 5+ years of experience in aerospace structures design, analysis, or related roles • Proficiency in CAD software and experience with engineering data analysis • Proven expertise in structural modeling and simulation tools (e.g., ANSYS, NASTRAN, or equivalent) • Strong understanding of material properties, stress analysis, fatigue assessment, load paths, design practices, and hand calculations • Strong technical knowledge in core engineering principles, fundamental mechanics of composite materials, design, analysis, testing, and fabrication • Excellent problem-solving and communication skills • Self-driven with a strong sense of autonomy and adaptability in a dynamic environment • Eligible to obtain and maintain an active U.S. Secret security clearance QUALIFICATIONS • Experience with clean sheet aircraft configuration • Siemens NX proficiency • FEMAP proficiency • Experience with fast paced prototype design and manufacture of uncrewed aircraft • Experience with high temperature materials selection • Broad experience across a range of aircraft programs • Hands-on experience with manufacturing • Practical aircraft knowledge (pilots license, A&P, etc.)

Location: Bellevue, United States Role Description We're bringing up new hardware built around USB-C Power Delivery controllers and are looking for an embedded firmware engineer to help take these boards from bare PCB to working, production-quality firmware. You'll write and debug firmware on 32-bit ARM microcontrollers, configure companion ICs over I2C/SPI/UART, and work hands-on at the bench in collaboration with our hardware team. Job Responsibilities - Bring up new PCBs: validate power/clocks, connect a debugger, enable peripherals, and get firmware running on new hardware Develop and debug embedded C firmware on ARM Cortex-M-class MCUs Configure and drive companion ICs over I2C or other peripheral buses Implement and debug USB-C / USB-PD behavior (power negotiation, source/sink roles, fault handling, etc.) Debug at the bench with oscilloscope, protocol/logic analyzer, multimeter, and SWD/JTAG Work from datasheets, register tables, and schematics Document configurations and design decisions Collaborate with hardware engineers to isolate hardware vs. firmware issues Required Skills - Strong embedded C on 32-bit MCUs (ARM Cortex-M or similar): interrupts, register-level peripheral work, development under flash/RAM constraints Working understanding of USB-C/USB-PD (source/sink/DRP roles, power contract negotiation) I2C/SPI/UART peripheral/companion-IC communication, configuration, and debug Hands-on hardware bring-up experience: taking a board from power-on to running firmware, or debugging firmware against real hardware Datasheet and schematic literacy: able to configure a part from its register tables and confirm pin/power connections Comfortable with standard bench debug tools: oscilloscope, logic/protocol analyzer, SWD/JTAG debugger, UART logging Git proficiency Preferred Skills - Experience with a Cypress/Infineon MCU SDK/IDE and its middleware (e.g. ModusToolbox, STM32Cube, or similar), including creating/customizing a board support package Firmware update/bootloader work (DFU or equivalent): building and flashing update images Power-path or regulator firmware: VBUS control, fault detection/recovery (OVP/UVP/OCP), enable/soft-start sequencing USB subsystem experience: hubs, DisplayPort Alt Mode, redrivers/retimers, or billboard devices Nice to have - Prior work with Infineon EZ-PD / PMG1 (or Cypress CCGx) PD controllers and ModusToolbox CI for embedded builds USB-IF PD compliance/USB-C requirements familiarity

Location: United States WHAT YOU’LL DO • Utilize first principle methods and design tools to develop new aircraft products • Own development of primary and secondary aircraft structural parts and assemblies (metallic and composite) from preliminary design through prototype manufacturing • Perform complex modeling and finite element analysis at the detailed component level, major assembly level, and aircraft level (analysis simulations to include strength, buckling, damage tolerance, and delamination) • Apply design for manufacturing concepts to create solutions that are cost effective and easy to manufacture at rate • Conduct trade studies and perform design and analysis research of complex engineering concepts to determine an optimal solution for weight, performance, manufacturability, cost, and/or schedule • Collaborate in a multidisciplinary environment to solve complex, open-ended problems with an emphasis on schedule and cost objectives • Coordinate work with mechanical systems, systems integration, aerodynamics, manufacturing, project engineering, and other team members • Onsite engineering support at manufacturing and integration sites REQUIRED QUALIFICATIONS • Bachelor's in Aerospace Engineering, Mechanical Engineering, or equivalent experience • 5+ years of experience in aerospace structures design, analysis, or related roles • Proficiency in CAD software and experience with engineering data analysis • Proven expertise in structural modeling and simulation tools (e.g., ANSYS, NASTRAN, or equivalent) • Strong understanding of material properties, stress analysis, fatigue assessment, load paths, design practices, and hand calculations • Strong technical knowledge in core engineering principles, fundamental mechanics of composite materials, design, analysis, testing, and fabrication • Excellent problem-solving and communication skills • Self-driven with a strong sense of autonomy and adaptability in a dynamic environment • Eligible to obtain and maintain an active U.S. Secret security clearance QUALIFICATIONS • Experience with clean sheet aircraft configuration • Siemens NX proficiency • FEMAP proficiency • Experience with fast paced prototype design and manufacture of uncrewed aircraft • Experience with high temperature materials selection • Broad experience across a range of aircraft programs • Hands-on experience with manufacturing • Practical aircraft knowledge (pilots license, A&P, etc.)

Location: Bengaluru, India We are looking for an experienced and results-driven Staffing Partner / Resource Manager to join our team. In this role, you will manage end-to-end staffing and resourcing processes for our IT projects, working closely with Resource Management team, hiring managers, project leads, and the wider HR and Recruitment teams to ensure the right talent is sourced, hired, and allocated efficiently — including across multiple countries and markets. As a Staffing Partner / Resource Manager, you will combine recruitment expertise with resource planning: identifying staffing needs, managing candidate pipelines, and optimizing the allocation of specialists across projects. Collaborate with hiring managers and project leads to define staffing needs Gather and clarify detailed position requirements from hiring managers and project stakeholders, including must-have skills, seniority level, and project context Select and match suitable candidates for open positions from both the internal bench and the external recruitment pipeline Monitor bench and resource availability, matching specialists to project needs and staffing forecasts Track staffing and resourcing metrics and provide regular updates to stakeholders Contribute to process improvements in recruitment and resource management workflows Extensive experience as a recruiter in the IT industry, with a strong track record of closing technical roles Proven experience hiring across multiple countries/regions Strong English language skills, both written and spoken, sufficient for daily communication with international stakeholders and candidates Strong negotiation skills, with the ability to manage Staffing discussions and align expectations between hiring managers and cross-functional teams Solid understanding of resource management principles and experience coordinating staffing across multiple projects Strong communication and interpersonal skills with the ability to build relationships with hiring managers and cross-functional teams Highly organized and detail-oriented, with the ability to manage multiple priorities effectively Working knowledge of employment laws and regulations across different jurisdictions

Location: Costa Mesa, United States; United States What You'Ll Do Full Cycle PCB Design: Translate system-level propulsion requirements into robust designs. Perform schematic capture and high-density PCB layouts (with a strong preference for Altium), component selection, bring-up, test, debug, and integration with the propulsion system. Engine System Electronics: Design and optimize flight controller circuits, power distribution/supplies, motor controller circuits, and electromagnetic actuator circuits. Rigorous Analysis: Conduct circuit simulations, worst-case analysis (WCA), thermal analysis, DFMEA, and component derating to ensure reliability under extreme vibration and temperature environments. Comprehensive Testing: Lead board bring-ups, Design Verification Testing (DVT), qualification (Qual) testing, and functional testing. Collaborative Design: Provide electrical support and collaborate closely with mechanical, thermal, software, test, quality, manufacturing, and systems engineering teams for development. Peer Reviews: Conduct peer-level and cross-discipline design reviews. Root Cause Analysis: Perform root cause and failure analysis in support of engine test and field operations. Required Qualifications Education & Experience: Bachelor’s Degree in Electrical Engineering (BSEE) with 5+ years of experience designing, testing, and troubleshooting complex board designs. Technical Fundamentals: Solid engineering fundamentals across Analog, Digital, and Power Electronics. Software & Tools: Deep proficiency with electronic design tools, specifically Altium Designer (or equivalent for schematic and layout) and LTSpice (or equivalent for circuit simulation). Laboratory Equipment: Competence with laboratory test equipment such as oscilloscopes, logic analyzers, thermal chambers, spectrum analyzers, function generators, DMMs, electronic loads, power supplies, and test automation. Interfaces & Protocols: Familiarity with standard interfaces (CAN, I2C, SPI, Ethernet) and common MCU/CPU architectures. Security Clearance: Eligible to obtain and maintain an active U.S. Secret security clearance. Preferred Qualifications Education: Master’s Degree in Electrical Engineering (MSEE). Advanced Tools: Experience with MATLAB / Simulink for data analysis, control loop modeling, or system simulations.

Location: South Africa; Philippines; North Macedonia; Morocco; Serbia; Bosnia and Herzegovina About Huzzle At Huzzle, we connect exceptional talent with top opportunities at leading companies across the UK, US, Canada, Europe, and Australia. Our clients include fast-growing startups, digital agencies, SaaS companies, and tech-enabled businesses across industries such as MarTech, FinTech, EdTech, and eCommerce. Unlike traditional outsourcing agencies, we place you directly with innovative companies where you become a valued member of the team. About the company Our client is a dynamic recruitment and talent solutions platform dedicated to bridging the gap between high-growth startups and top-tier professional talent. By leveraging innovative sourcing strategies and deep industry insights, the team helps organizations across various sectors scale their operations with precision. They specialize in identifying specialized skill sets for modern businesses, ensuring that both candidates and employers find the perfect alignment for long-term success. As a fast-growing player in the human capital and HR technology space, the company operates with a remote-first mindset that prioritizes efficiency and impactful connections. The team is driven by a mission to modernize the hiring experience through data-informed decision-making and a highly collaborative internal culture. For professionals looking to make a significant impact within a scalable, forward-thinking environment, this organization offers an exciting opportunity to shape the future of talent acquisition and workforce development. Job Summary We are seeking a high-energy, hands-on Business Development Manager to lead a team of four specialists while maintaining an active presence on the front lines of sales. This is not a "sideline" management role; it is a position for a true sales leader who thrives on coaching, analyzing data, and closing deals. You will be responsible for driving accountability, optimizing outbound campaigns, and ensuring the team consistently hits aggressive revenue goals within the staffing and recruiting industry. If you are an expert at turning raw data from tools like Apollo and Aircall into actionable sales strategies, we want to hear from you. Key Responsibilities Team Leadership & Performance: Manage, coach, and mentor a team of four Business Development Specialists, conducting weekly 1-on-1s and sales meetings to drive KPI accountability. Sales Strategy & Optimization: Analyze outbound campaign performance (reply rates, meetings booked, and conversions) to refine messaging, target personas, and outreach sequences. Data-Driven Coaching: Utilize Apollo, Aircall, and CRM analytics to diagnose underperformance, review call recordings, and lead role-play sessions to improve the team's objection handling and discovery techniques. Personal Production: Lead by example by maintaining a personal pipeline and closing a minimum of one new deal per month. Pipeline Management: Monitor CRM discipline to ensure all prospects, opportunities, and agreements are accurately tracked and forecasted. Discovery & Closing Support: Join team discovery calls to assist in uncovering pain points, identifying decision-makers, and advancing prospects toward signed agreements. Requirements Minimum of 5 years of experience managing or supervising a Business Development or Sales team. Proven experience in the BPO, RPO, or Direct Staffing industry is mandatory. Expert-level proficiency in outbound prospecting, including cold calling, email sequencing, and LinkedIn Sales Navigator. Strong analytical skills with the ability to diagnose why a campaign or representative is underperforming using specific data metrics. Mastery of the full sales cycle: prospecting, discovery, objection handling, and closing. Ability to create and implement performance recovery strategies when KPIs are not met. Excellent written and verbal communication skills with a focus on value-based selling. Advanced experience with Apollo, Aircall, and LinkedIn Sales Navigator. Familiarity with multi-channel sales sequencing tools and advanced CRM reporting. Experience developing custom sales training modules and rebuttals for the staffing industry. Benefits 💻 Fully Remote: Work from anywhere with international teams 🚀 Career Growth: Join companies in SaaS, MarTech, and B2B services 🤝 Peer Community: Connect with high-performing sales professionals in our network 🧭 Ongoing Support: Receive guidance from Huzzle before and after placement 💰 Tailored Compensation: Salaries vary by client and candidate preference — we’ll match you with options that fit your goals

Location: Costa Mesa, United States What You'Ll Do Full Cycle PCB Design: Translate system-level propulsion requirements into robust designs. Perform schematic capture and high-density PCB layouts (with a strong preference for Altium), component selection, bring-up, test, debug, and integration with the propulsion system. Engine System Electronics: Design and optimize flight controller circuits, power distribution/supplies, motor controller circuits, and electromagnetic actuator circuits. Rigorous Analysis: Conduct circuit simulations, worst-case analysis (WCA), thermal analysis, DFMEA, and component derating to ensure reliability under extreme vibration and temperature environments. Comprehensive Testing: Lead board bring-ups, Design Verification Testing (DVT), qualification (Qual) testing, and functional testing. Collaborative Design: Provide electrical support and collaborate closely with mechanical, thermal, software, test, quality, manufacturing, and systems engineering teams for development. Peer Reviews: Conduct peer-level and cross-discipline design reviews. Root Cause Analysis: Perform root cause and failure analysis in support of engine test and field operations. Required Qualifications Education & Experience: Bachelor’s Degree in Electrical Engineering (BSEE) with 5+ years of experience designing, testing, and troubleshooting complex board designs. Technical Fundamentals: Solid engineering fundamentals across Analog, Digital, and Power Electronics. Software & Tools: Deep proficiency with electronic design tools, specifically Altium Designer (or equivalent for schematic and layout) and LTSpice (or equivalent for circuit simulation). Laboratory Equipment: Competence with laboratory test equipment such as oscilloscopes, logic analyzers, thermal chambers, spectrum analyzers, function generators, DMMs, electronic loads, power supplies, and test automation. Interfaces & Protocols: Familiarity with standard interfaces (CAN, I2C, SPI, Ethernet) and common MCU/CPU architectures. Security Clearance: Eligible to obtain and maintain an active U.S. Secret security clearance. Preferred Qualifications Education: Master’s Degree in Electrical Engineering (MSEE). Advanced Tools: Experience with MATLAB / Simulink for data analysis, control loop modeling, or system simulations.