Вакансии

Location: Abu Dhabi, United Arab Emirates About EnerMech: We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivaled expertise, equipment, and technology that supports the entire asset life cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline, subsea, process, and valves – all designed to help you optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions. This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organization. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities. Job Overview: The primary responsibility is to support the deck operations on the client platform as per EnerMech processes and procedure and demonstrate safety leadership and continuous development in all aspects of crane, lifting and support service activities. Key Responsibilities: Operate platform pedestal and overhead gantry cranes under the direction of nominated platform personnel and in accordance with manufacturer's instructions and platform operating procedures. The crane operator should only respond to the instruction (signals) given by the Rigger or appointed Signaler, he shall follow the Emergency Stop Signal from any one at site in case of any emergency. Carry out daily pre-operational checks on the cranes in accordance with pre-use checklist. The crane Operator shall also be responsible for reporting all defects noted during operation of the crane to the crane supervisor. Able to set and check the functioning of the rated capacity limiter and rated capacity indicator. Responsible for effectively carrying out scheduled planned maintenance routines up to (6monthly) of all offshore pedestal and overhead cranes, with the objective of maintaining safe operations. Maintain cranes in a clean and tidy condition, including cabs, machinery housing and external surfaces. Carry out Platform Emergency Duties under the direction of nominated personnel. Keep a logbook of crane operations. In addition to crane maintenance duties, operate overhead cranes under the direction of nominated site personnel and in accordance with authorized operators instructions manual and site operating procedures. When working overhead cranes, carry out daily routine on the crane in accordance with maintenance procedures and pre-start checklist. Inspect the job site to ensure compliance with safe practices and procedures. Maintain quality of safety in the crane group and participate in the site safety reviews i.e. Near Miss Reporting/STOP cards. Responsible for giving a detailed report of any crane incidents to the Crane Supervisor. Requirements All Crane Operator Maintainer must read and write English fluently, be experienced, fully trained and competent in the operation and maintenance of offshore pedestal cranes. The Crane Operator Maintainer shall have adequate understanding of the capabilities and limitations of each crane with regard to offshore operation, and of the various installed mechanisms, control and safety systems. A minimum 21 years of age. Educated to a minimum qualification of higher secondary school certificate or HNC or equivalent qualification. At Least a minimum of 5 years' experience in an offshore/onshore experience and a minimum of 3 years in similar position. Have an Offshore Stage 3 Crane Operator certificate. Crane Operator Maintainer shall have sufficient general engineering knowledge of the lifting equipment to carry out routine maintenance and inspection routines up to 3 monthly PM. Crane Operator Maintainer shall assist mechanics and ad-hoc crew in completing, routine maintenance, major maintenance, troubleshooting and breakdown maintenance. Crane Operator Maintainer shall also be multi-skilled in other platform duties including operating firefighting equipment and undertaking fire standby duties, acting as slinger, Banks man/Signal man, Rigger and deck duties, when required. Crane Operator Maintainer shall complete reports, logs and other documentation, as required & shall maintain the cranes in clean condition, internally and externally. Benefits Basic day rate and offshore allowance Rotational Allowances Training allowance Over time allowance Rotation 56/28

Location: Dubai, United Arab Emirates; Singapore Location: Dubai, Singapore, West Africa Contract Type: Short-term and Long-term Projects Immediate Start About the Role: Due to a number of recent contract wins, Interocean is seeking experienced Project Engineers and Subject Matter Experts (SMEs) across multiple disciplines to support upcoming MODU (Mobile Offshore Drilling Unit) shipyard projects. We are currently hiring for both short-term and long-term assignments in Middle East, Singapore, and West Africa . Disciplines Required: Structural Engineering Piping Engineering Mechanical / Drilling Equipment Engineering Electrical Engineering Well Control Crane & Lifting Equipment Key Responsibilities: Provide technical expertise and engineering support during MODU shipyard projects Review and interpret engineering drawings, specifications, and standards Ensure compliance with safety, quality, and regulatory requirements Collaborate with cross-functional teams to deliver project milestones Support commissioning, inspections, and troubleshooting activities Contribute to project planning, reporting, and documentation Requirements Proven experience in MODU shipyard environments Strong technical background in one or more of the listed disciplines Ability to work in international locations and adapt to diverse project teams Excellent communication and problem-solving skills Relevant engineering qualifications and certifications Benefits Competitive rates and benefits Opportunities for career progression Supportive and safety-focused working environment Exposure to high-profile projects

Location: Al Hofuf, Saudi Arabia Eram Talent is seeking a skilled CIP / Sterilization Operator to join a reputable company in Saudi Arabia. The CIP (Clean-In-Place) / Sterilization Operator will be responsible for executing cleaning and sterilization procedures for production equipment and pipelines to ensure aseptic conditions are maintained according to industry standards. This role is vital for maintaining product quality, safety, and hygiene within manufacturing environments such as food, beverage, pharmaceutical, or biotech facilities. Responsibilities Operate CIP system according to standard operating procedures (SOPs). Monitor cleaning cycles, temperatures, chemical concentrations, and flow rates. Prepare cleaning solutions and ensure proper handling of chemicals. Inspect equipment before and after cleaning for proper sanitation. Record cleaning data accurately in logs or digital systems. Report any malfunctions, deviations, or safety concerns immediately. Collaborate closely with production, quality control, and maintenance teams to coordinate cleaning schedules and troubleshoot issues. Adhere to safety, hygiene, and environmental regulations at all times. Requirements Diploma or degree in Chemical Engineering, Biotechnology, Food Technology, or related field preferred. Minimum 2 years of experience operating CIP and sterilization systems in food, pharmaceutical, or biotech industries. Strong knowledge of CIP processes, sterilization techniques, and cleaning validation protocols. Ability to read and follow SOPs and technical documentation accurately. Good mechanical aptitude and troubleshooting skills for equipment operation. Attention to detail and commitment to maintaining hygiene and safety standards. Ability to work in shifts and in a team environment. Basic computer skills for data documentation and reporting.

Location: Dhahran, Saudi Arabia Eram Talent is seeking a motivated and detail-oriented Associate Facilities Engineer specializing in Mechanical systems to join our dynamic team in Saudi Arabia. As part of our commitment to delivering top-tier engineering solutions across various sectors such as Oil & Gas, Infrastructure, Energy, and Healthcare, you will support the design, operation, and maintenance of mechanical facilities to ensure optimal performance. In this role, your responsibilities include ensuring 24/7 operational efficiency of office facilities through inspections, maintenance coordination, and user interactions; managing logistics such as receiving and checking materials; and handling project logistics during scheduled shutdowns. The division also oversees janitorial services and parking management, and serves as the first response team during emergencies and incidents. Responsibilities Supports the development of engineering solutions and the formulation of design basis by collecting and analyzing data related to operational requirements, process considerations, and economic factors to support proposals for new construction, modifications, or equipment maintenance. Monitors and inspects the construction progress of assigned projects to ensure compliance with company engineering standards; recommends or confirms design modifications, material, and equipment substitutions; and ensures costs remain within approved budgets or justifies any overruns. Participates in developing cost estimates for engineering, labor, equipment, and materials based on the analysis of preliminary design data; assists in resolving related issues as they arise. Requirements Bachelor's degree in Mechanical Engineering or a related field. 7+ years of experience in operation maintenance and engineering activities, including analysis, development, design, coordination, and project control. Basic knowledge of HVAC, plumbing, and fire suppression systems. Familiarity with relevant industry codes and safety regulations. Strong analytical and problem-solving skills. Good communication and teamwork abilities. Proficiency in engineering software and tools related to mechanical systems. Willingness to learn and adapt in a fast-paced environment. Ability to work effectively under supervision and independently when required.

Location: Georgetown, Guyana EnerMech is seeking a talented and motivated Measurement Technician to join our growing team. In this critical role, you will be responsible for the installation, calibration, maintenance, and troubleshooting of measurement and instrumentation systems supporting natural gas pipeline operations. As a Measurement Technician, you will play a key role in ensuring the accurate measurement of gas flow, pressure, temperature, and volume while supporting operational excellence, regulatory compliance, and system reliability. This position offers the opportunity to work with industry-leading equipment, solve complex technical challenges, and contribute directly to the safe and efficient transportation of energy. If you are a hands-on professional with a strong technical background and a passion for precision, we encourage you to apply and become part of a team committed to delivering exceptional service and operational performance. Job Description: Install, inspect, and maintain gas measurement and metering systems, including flow meters, pressure transmitters, temperature sensors. Perform routine calibration and verification of measurement equipment to ensure accuracy and compliance with industry standards Monitor and troubleshoot measurement and instrumentation systems to detect and correct faults or discrepancies Conduct proving and validation tests of gas meters and flow devices Record, analyze, and report measurement data for operational purposes Ensure compliance with industry regulations, standards (e.g., API, AGA), and safety procedures Maintain and update measurement records, logs, and calibration reports Support installation and commissioning of new measurement systems and equipment Collaborate with engineering, operations, and maintenance teams to ensure optimal system performance Respond to emergency situations and system failures related to measurement equipment Requirements Diploma or Associate Degree in Instrumentation, Electrical Engineering, Mechanical Engineering, or a related technical field Relevant certification in instrumentation or measurement systems is an asset Minimum 2–5 years of experience in measurement, instrumentation, or gas pipeline operations (preferred)

Location: Mesa, AZ, USA Bradken is a global manufacturer of custom-engineered products and solutions for the resources sector. Our products operate in some of the toughest mining environments in the world, where performance, reliability, innovation, and practical engineering support are critical to customer success. We partner closely with some of the largest mining companies globally, delivering solutions that improve equipment performance, productivity, safety, and lifecycle valu About the Role We are seeking an Applications Engineer to support the development, improvement, and customization of Bradken's mining equipment product lines, with a primary focus on Crawler Systems for Electric Rope Shovels and Hydraulic Excavators . This is more than a traditional design engineering role. While strong mechanical design capabilities are fundamental, this position also requires engineers who are comfortable working directly with customers, participating in technical discussions, presenting solutions, and supporting product evaluations in the field. You will collaborate across Engineering, Product Management, Manufacturing, Supply Chain, Sales, and end users to transform operational challenges into practical engineering solutions. The role offers excellent exposure to mining operations, customer problem-solving, and the performance of large-scale equipment operating in demanding environments. Success in this role requires someone who enjoys both technical engineering work and customer interaction. You should be comfortable explaining technical concepts, presenting recommendations, gathering customer requirements, and building credibility through engineering expertise. This is an outstanding opportunity for engineers who want to see their designs perform in real-world applications rather than working exclusively behind a desk. While previous mining experience is beneficial, we are equally interested in candidates with strong machinery design fundamentals who are eager to learn the mining industry, develop product expertise, and immerse themselves in customer challenges and field applications. Key Responsibilities You will work across product design, reverse engineering, modelling, drafting, simulation, technical analysis, field evaluations and customer support activities. You will: Create and update 3D models, detailed drawings, and engineering documentation. Support reverse engineering, product improvements, and new concept development. Complete engineering calculations, analysis, simulations, and technical verification activities. Collaborate with Manufacturing and Supply Chain teams to ensure designs are practical, manufacturable, and cost-effective. Participate in customer discussions to understand operational requirements and technical challenges. Present engineering solutions, product recommendations, and technical findings to both internal and external stakeholders. Support field evaluations, product inspections, and site investigations. Conduct visits to customer and manufacturing locations to gather data and support product performance reviews. Capture specifications, product data, and design updates within Bradken's Product Lifecycle Management system. Provide technical guidance to Sales, Operations, and Customer Support teams. Contribute to safety, quality, continuous improvement, and product innovation initiatives. This role is primarily office/shop-based with regular interaction with customers and operational teams. Travel to customer, mine, and manufacturing sites is expected. What We're Looking ForRequired Qualifications Bachelor's Degree in Mechanical Engineering or equivalent. Experience in mechanical design, product design, reliability engineering, or product development. Strong proficiency in 3D CAD modelling, detailed drafting, and engineering analysis. Experience working with manufactured products, design changes, and technical documentation. Ability to collaborate effectively with engineering, manufacturing, commercial, and operational teams. Strong verbal communication and presentation skills. Current driver's license and ability to travel regionally. Spanish language capability is highly preferred. French language capability would be considered an asset. Ideal Industry Backgrounds We are particularly interested in candidates with experience in: Mining equipment Mobile equipment Heavy industrial machinery Material handling equipment Construction equipment Power generation equipment Rotating equipment Industrial manufacturing Structural mechanical systems Crushers, conveyors, processing equipment, or similar industrial products Machinery design experience is strongly preferred. Candidates coming from industries involving large industrial equipment, heavy mechanical assemblies, mobile machinery, or power generation environments will likely find the strongest alignment with this opportunity. While all engineering backgrounds will be considered, candidates whose experience is primarily focused on building services, HVAC systems, commercial building design, or MEP consulting may find the role less aligned due to the heavy equipment and industrial machinery focus of the position. Technical Skills Valued Experience with the following tools and technologies is highly regarded: Siemens NX ANSYS Siemens Teamcenter PLM 3D Scanning Technologies Product Lifecycle Management Systems Finite Element Analysis (FEA) Reverse Engineering Processes Location & Work Authorization This position is based in Phoenix (Mesa), Arizona, USA . Candidates must either be currently located within reasonable commuting distance of the Phoenix metropolitan area or be willing to relocate at their own expense. Please note that Bradken is unable to provide visa sponsorship or employment sponsorship for this position . Applicants must have valid authorization to work in the United States at the time of application and for the duration of employment. Bradken Benefits A strong safety-first culture Competitive salary and performance bonuses Educational Assistance Program Flexible work options Global career opportunities Learning & development support Employee Assistance Program (EAP) Paid parental leave and wellbeing initiatives Why This Role? This role offers a unique opportunity to combine mechanical design engineering , customer engagement , and field exposure within the global mining industry. If you enjoy designing large-scale machinery, solving complex engineering challenges, presenting technical solutions, learning directly from customer operations, and seeing your work applied in some of the world's most demanding mining environments, this role will provide an exciting next step in your career. If you are interested in joining a team that is making a significant impact in the industry, we invite you to submit your application, along with your resume and a concise cover letter outlining why this position aligns with your career aspirations. Shortlisting for candidates will commence immediately. Everyone has a story... become a part of ours! How We Hire About Our Screening Process: As we work with teams around the world, time‑zone differences can make live screening challenging. To support a fair, consistent, and inclusive evaluation, we may invite candidates to complete a one‑way video screening at a time that suits them. If you require adjustments or an alternative format, we’re happy to discuss this. Before commencing employment , you will be required to complete a psychometric assessment and a pre-employment medical, including drug and alcohol testing. WE RESPECTFULLY REQUEST NO APPROACHES FROM RECRUITMENT AGENCIES. Bradken is an Equal Opportunity Employer. We are dedicated to fostering a diverse, inclusive, engaging, and flexible work environment for our employees, as we believe that remarkable outcomes arise when individuals are empowered to express their authentic selves in their work. All employment decisions will be based on merit, competence, performance, and business needs.

Location: Lappeenranta, Finland About Nebius: Nebius is leading a new era in cloud infrastructure for the global AI economy. We are building a full-stack AI cloud platform that supports developers and enterprises from data and model training through to production deployment, without the cost and complexity of building large in-house AI/ML infrastructure. Built by engineers, for engineers. From large-scale GPU orchestration to inference optimization, we own the hard problems across compute, storage, networking and applied AI. Listed on Nasdaq (NBIS) and headquartered in Amsterdam, we have a global footprint with R&D hubs across Europe, the UK, North America and Israel. Our team of 1,500+ includes hundreds of engineers with deep expertise across hardware, software and AI R&D. The Role We are seeking a skilled and motivated Data Center Electrical Lead to support the operation and maintenance of critical infrastructure within a mission-critical data center environment in Lappeenranta, Finland. The successful candidate will have a strong electrical background and experience working with power distribution systems, industrial maintenance, or critical facilities operations. This role is responsible for ensuring maximum uptime, reliability, and safety of data center electrical and mechanical systems while supporting 24/7 operations. Key Responsibilities Critical Infrastructure Operations Operate and maintain critical electrical systems including: UPS systems Medium- and low-voltage switchgear Transformers Backup generators ATS/STS equipment Battery systems Power distribution units (PDUs) Monitor facility systems using BMS/EPMS platforms. Perform routine inspections and operational checks of critical infrastructure. Maintenance & Troubleshooting Perform preventive and corrective maintenance on electrical and mechanical systems. Diagnose and troubleshoot equipment failures and alarms. Support emergency response and incident recovery activities. Coordinate with vendors and contractors during maintenance activities. Safety & Compliance Follow Finnish electrical safety regulations and company safety procedures. Support lockout/tagout (LOTO) procedures and safe switching operations. Maintain compliance with SFS 6002, occupational safety requirements, and site policies. Ensure all maintenance activities are properly documented. Operational Support Participate in 24/7 shift operations, including nights and weekends. Maintain accurate logs, reports, and maintenance records. Assist with commissioning and testing of new equipment and infrastructure upgrades. Support continuous improvement initiatives for operational efficiency and reliability. Qualifications Required Vocational qualification, diploma, or degree in: Electrical Engineering Industrial Maintenance Automation Technology Power Systems Experience working with electrical infrastructure or industrial systems. Knowledge of: Power distribution systems Electrical troubleshooting Preventive maintenance practices Ability to read electrical schematics and single-line diagrams. Good English communication skills. Preferred Data center or mission-critical facility experience. SFS 6002 Electrical Safety certification. Experience with medium-voltage systems. Knowledge of HVAC/cooling infrastructure. Experience using CMMS, BMS, or EPMS systems. Finnish language skills are an advantage. Benefits & Perks: Competitive compensation Career growth and learning opportunities Flexibility and ownership Collaborative and innovative culture Opportunity to work on impactful AI projects International environment and talented teams What's it like to work at Nebius: Fast moving - Bold thinking - Constant growth - Meaningful impact - Trust and real ownership - Opportunity to shape the future of AI Equal Opportunity Statement: Nebius is an equal opportunity employer. We are committed to fostering an inclusive and diverse workplace and to providing equal employment opportunities in all aspects of employment. We do not discriminate on the basis of race, color, religion, sex (including pregnancy), national origin, ancestry, age, disability, genetic information, marital status, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by applicable law. Applicants must be authorized to work in the country in which they apply and will be required to provide proof of employment eligibility as a condition of hire. If you need accommodations during the application process, please let us know.

Location: Lappeenranta, Finland About Nebius: Nebius is leading a new era in cloud infrastructure for the global AI economy. We are building a full-stack AI cloud platform that supports developers and enterprises from data and model training through to production deployment, without the cost and complexity of building large in-house AI/ML infrastructure. Built by engineers, for engineers. From large-scale GPU orchestration to inference optimization, we own the hard problems across compute, storage, networking and applied AI. Listed on Nasdaq (NBIS) and headquartered in Amsterdam, we have a global footprint with R&D hubs across Europe, the UK, North America and Israel. Our team of 1,500+ includes hundreds of engineers with deep expertise across hardware, software and AI R&D. The Role We are seeking a skilled and motivated Data Center Operations Technician to support the operation and maintenance of critical infrastructure within a mission-critical data center environment in Lappeenranta, Finland. The successful candidate will have a strong electrical background and experience working with power distribution systems, industrial maintenance, or critical facilities operations. This role is responsible for ensuring maximum uptime, reliability, and safety of data center electrical and mechanical systems while supporting 24/7 operations. Key Responsibilities Critical Infrastructure Operations Operate and maintain critical electrical systems including: UPS systems Medium- and low-voltage switchgear Transformers Backup generators ATS/STS equipment Battery systems Power distribution units (PDUs) Monitor facility systems using BMS/EPMS platforms. Perform routine inspections and operational checks of critical infrastructure. Maintenance & Troubleshooting Perform preventive and corrective maintenance on electrical and mechanical systems. Diagnose and troubleshoot equipment failures and alarms. Support emergency response and incident recovery activities. Coordinate with vendors and contractors during maintenance activities. Safety & Compliance Follow Finnish electrical safety regulations and company safety procedures. Support lockout/tagout (LOTO) procedures and safe switching operations. Maintain compliance with SFS 6002, occupational safety requirements, and site policies. Ensure all maintenance activities are properly documented. Operational Support Participate in 24/7 shift operations, including nights and weekends. Maintain accurate logs, reports, and maintenance records. Assist with commissioning and testing of new equipment and infrastructure upgrades. Support continuous improvement initiatives for operational efficiency and reliability. Qualifications Required Vocational qualification, diploma, or degree in: Electrical Engineering Industrial Maintenance Automation Technology Power Systems Experience working with electrical infrastructure or industrial systems. Knowledge of: Power distribution systems Electrical troubleshooting Preventive maintenance practices Ability to read electrical schematics and single-line diagrams. Good English communication skills. Preferred Data center or mission-critical facility experience. SFS 6002 Electrical Safety certification. Experience with medium-voltage systems. Knowledge of HVAC/cooling infrastructure. Experience using CMMS, BMS, or EPMS systems. Finnish language skills are an advantage. Benefits & Perks: Competitive compensation Career growth and learning opportunities Flexibility and ownership Collaborative and innovative culture Opportunity to work on impactful AI projects International environment and talented teams What's it like to work at Nebius: Fast moving - Bold thinking - Constant growth - Meaningful impact - Trust and real ownership - Opportunity to shape the future of AI Equal Opportunity Statement: Nebius is an equal opportunity employer. We are committed to fostering an inclusive and diverse workplace and to providing equal employment opportunities in all aspects of employment. We do not discriminate on the basis of race, color, religion, sex (including pregnancy), national origin, ancestry, age, disability, genetic information, marital status, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by applicable law. Applicants must be authorized to work in the country in which they apply and will be required to provide proof of employment eligibility as a condition of hire. If you need accommodations during the application process, please let us know.

Location: Espoo Workplace: Hybrid Role Highlights: - Title: OBC & Comms AIT Engineer - Department: Global Manufacturing Organization - Reports to: AIT Engineering Team Lead - Location: Espoo, Finland - Type of Contract: Permanent - Working model: On-site - Employment is subject to applicable security screening (incl. SUPO, where required) About the role ICEYE is seeking an AIT Engineer to own the assembly, integration, and testing of on-board computer and communications subsystems at our Espoo headquarters. This is a hands-on technical role for an engineer with strong expertise in complex electronics and SDR-based communications systems, ready to contribute directly to spacecraft production and mission-critical troubleshooting in a fast-paced, high-cadence environment. What you will do - Serve as the primary technical point of contact for all OBC and Comms issues during manufacturing, integration, and testing - Conduct hands-on inspection, verification, and assembly of OBC and Comms subsystems hardware - Identify, contain, and drive root cause analysis of non-conformances; implement corrective actions and close feedback loops into design and production processes - Contribute to OBC and Comms design reviews, production ramp-up planning, and DFM/DFT improvements - Represent AIT Engineering across projects and disciplines, interfacing with design engineers, production leads, and other domain AIT engineers - Apply system-level understanding to anticipate integration risks across subsystem interfaces and ensure mission success - Produce and maintain technical documentation including test procedures, NCRs, and corrective action records What you bring Must have - 5+ years of hands-on experience in the development, integration, testing, or production of complex electronics and communications systems - Deep technical knowledge of electronics engineering and SDR-based communications systems, with system-level understanding across full hardware architectures - Demonstrated experience in multidisciplinary engineering environments, including mentoring engineers and technicians and driving cross-functional collaboration - Strong track record in DFM and DFT in high-reliability hardware environments - Familiarity with integration, verification, configuration management, and production ramp-up processes in complex hardware industries - Proactive, hands-on approach to problem-solving including structured root cause analysis - Continuous improvement mindset, with the ability to drive reliability and repeatability as production volumes scale - Ability to manage multiple projects and priorities simultaneously - Strong written and spoken English communication skills - Experience writing clear, traceable technical documentation Nice to have - Experience with issue tracking and configuration management tools - Familiarity with Python or AI-assisted tools for productivity and test automation - Rapid ability to structure and synthesize complex technical information and communicate conclusions clearly - Resilience and sustained motivation in high-pressure production environments - Transparency, humility, and an active growth mindset   Application Process - Talent Acquisition Interview - Hiring Manager General Interview - Technical Interview (onsite or virtual), including a Technical Challenge - Hiring Team + Director-level Interview - Offer Decision What We Offer at ICEYE At ICEYE, you will join a diverse and highly engaged team united by the ambition to make the impossible possible. We know that we will succeed only through exceptional people in our team, which is why your growth, well-being, and success are a priority. As a global scale-up, we combine speed and ambition with the opportunity to take real ownership from day one. You will benefit from continuous professional development, training opportunities, and a ICEYE is a place where your contributions have a visible impact and where we celebrate success together.   Benefits - A job that matters in a dynamic Defence Technology and Earth Observation environment with a scale-up approach - An independent role with a supportive and diverse work environment - Time for self-development, research, training, conferences, or certification schemes - Health insurance - Creative, inspiring and collaborative office Our Commitment to Diversity, Equity, and Inclusion At ICEYE, we believe that diversity isn't just a buzzword – it's our greatest asset. We're committed to fostering an inclusive environment where every voice is not only heard but celebrated. We know that diverse perspectives breed innovation and creativity, which is why we actively seek out individuals from all walks of life, backgrounds, and experiences. Whatever your background, we want you to bring your authentic self to the table. Join us and be part of a team where differences are not only embraced but cherished, because together, we're stronger. We welcome applications from people of all backgrounds, including those who may need workplace adjustments. If you require any specific accommodations or assistance during the recruitment process for any reason, please let us know. Apply now to start your ICEYE journey, and help us continue to make the impossible possible together. Read more about ICEYE and working with us at iceye.com http://iceye.com

Location: Worldwide Workplace: hybrid Position Summary / Job description We are looking for a Restaurant Manager’ ready to join immediately.   Primary Responsibility of the Role: · Leads the Restaurant teams and ensures training, development and supervision of the Restaurant teams in product knowledge and service. · Supervises and motivates the team by ensuring all Standard Operating Procedures are in place and executed before, during and after service. · Ensures proper inventory processes including requisitions, receiving, moving and stocking product in accordance with first in/ first out (FIFO). · Prepares for and leads all Sanitation and Public Health inspections. · Advance planning, coordination and oversight of execution of special events and Banquets. · Provides assistance to direct reports and the Assistant Food and Beverage Manager in the execution of the day-to-day operations of the Restaurant venues. · Manages the financial performance to exceed expectations for all Specialty venues in partnership with senior leadership. · Coaches others by providing constructive feedback; helps others identify developmental needs and monitors progress; promoting an environment where everyone is valued and included. · Coordinates and maintains on-going training programs and its’ execution to ensure all team members always have access to all pertinent training materials and are regularly tested on all information including menus, hours of operation, steps of service, Public Health and other divisional, brand information. · Utilizes interpersonal and communication skills to lead, influence, and encourage others; advocates sound financial/business decision making; demonstrates honesty and integrity. · Able to execute any electronic reservation system as assigned by company directives and to be able to train and guide on-board restaurant team members competently in the system. · Ensuring cooperation and coordination of activities with all other departments, with special focus on the relationship with the Galley Department/Executive Chef. · Leading “by example” by knowing manuals and guidelines, including the latest updates, and teaching/coaching on board teams for optimal results. · Conducting VSP inspections with the shipboard management team, ensuring 100% compliance, including equipment status and maintenance reports. · Monitoring NPS Scores and by engaging the management team immediately follows up on both success and failure to create an environment of acute awareness and positive re-enforcement. · Additional duties may, and will, be assigned by the shore side management with an expectation of execution. Position Requirements: Valid Standards of Training, Certification and Watchkeeping for Seafarers (STCW) and flag certification for the duration of the contract and appropriate to position. Previous Restaurant Manager or Maître D experience on cruise line/passenger vessel. Excellent verbal and written command of the English and French Language. Superior knowledge and experience in Public Health rules and regulations related to VSP and HACCP. Excellent working knowledge of food, beverage (wine, beer, spirits, cocktails, coffee, tea) and an international cuisine. Collaborative and interpersonal, who build positive relationships, exhibit tact and earn trust. Strong communicator, both verbally and in writing, who effectively communicate at all levels. Problem solvers, who are flexible and creative in finding solutions for hard problems. Self-starters, who take the initiative in leading goals, utilize analytical skills and possess the adaptability to change. Accountable individuals, who take ownership of projects, effectively communicate results, and recommend improvements. High School Diploma or GED Working knowledge of various computer software programs (MS Office). Employment Terms & Conditions 4 months +/-1 months We would appreciate to receive your application including your CV with all references of employers, proof of previous sea service, completed training's and certificates by clicking on the “apply” button below.

Location: Tashkent, Uzbekistan We are seeking a driven and highly organised Operations Manager to lead and streamline the operational activities of our real estate development projects. In this critical role, you will oversee the day-to-day business operations across the entire property development lifecycle - from land acquisition and pre-development to construction and final handover. You will act as the vital link between internal teams, external contractors, and local authorities, ensuring that our residential and commercial projects are delivered on time, within budget, and to the highest quality standards. Key Responsibilities Project Lifecycle Management: Oversee operational workflows for multiple real estate projects simultaneously, ensuring smooth transitions between pre-development, design, construction, and close-out phases. Contractor & Vendor Coordination: Manage relationships with general contractors, architects, engineers, and suppliers. Oversee the bidding process, negotiate contracts, and ensure vendors meet performance and delivery standards. Permitting & Compliance: Coordinate with local municipalities to secure necessary zoning approvals, building permits, and inspections. Ensure all site operations comply with local building codes, environmental regulations, and safety standards (OSHA/local equivalents). Budgeting & Cost Control: Monitor project budgets, review construction draw requests, and track operational expenses. Identify cost-saving opportunities and mitigate financial risks associated with material delays or labor shortages. Site Monitoring: Conduct regular site visits to evaluate construction progress, enforce quality control, and resolve on-site operational bottlenecks. Cross-Functional Leadership: Collaborate closely with the Finance, Sales & Marketing, and Legal departments to ensure operational alignment with the company's broader financial and business objectives. Reporting & Analytics: Generate weekly and monthly operational reports for the executive team, detailing project timelines, budget variances, and risk assessments. Requirements Education: Bachelor’s degree in Construction Management, Real Estate Development, Civil Engineering, Business Administration, or a related field. Experience: 5+ years of operational or project management experience within the real estate development, commercial real estate, or construction industry. Industry Knowledge: Deep understanding of the real estate development process, including entitlement, design phases, construction methods, and property management. Financial Acumen: Strong ability to read and manage complex construction budgets, financial pro-formas, and cash flow schedules. Technical Skills: Proficiency in real estate and construction management software and standard office suites. Communication & Negotiation: Exceptional negotiation skills with a proven track record of managing difficult stakeholder conversations and closing favorable vendor contracts. Problem-Solving: Ability to thrive in a high-pressure environment, anticipating site delays or supply chain issues and executing swift, effective solutions. Benefits Competitive base salary and performance-based project completion bonuses. Vehicle allowance or reimbursement for site-travel expenses. Opportunities to work on landmark real estate projects. Professional development and continuous training opportunities.

Location: Dhahran, Saudi Arabia Eram Talent is seeking a qualified HVAC / Fire Protection Engineer to join our team working on Buildings and Residential Projects in Saudi Arabia. This role involves designing, reviewing, and overseeing the installation of HVAC and fire protection systems to ensure safety, efficiency, and compliance with relevant codes and standards. The successful candidate will collaborate closely with architects, contractors, and other engineering disciplines to deliver integrated solutions that meet project specifications and client requirements. The engineer will also participate in site inspections, risk assessments, and ensure all systems function optimally within building environments. If selected, the work location would be onsite at Saudi Arabia. Requirements Bachelor's degree in Mechanical Engineering, Fire Protection Engineering, or a related field. Minimum of 7 to 10 years’ experience of mechanical engineering principles. with a preference minimum of 3 to 5 years’ experience in HVAC system or Fire protection system in building/residential projects. You must be able to demonstrate experience in mechanical system design HVAC or Fire protection, installation, and testing. Knowledge of cost estimation and procurement processes related to mechanical projects is preferred. Experience with technical report writing and documentation is also necessary Strong knowledge of HVAC design principles and fire protection codes and standards applicable in Saudi Arabia. Strong communication and teamwork abilities to collaborate effectively with multidisciplinary teams. Familiarity with local and international building codes and regulations. Professional certifications in HVAC and/or fire protection engineering are advantageous.

Location: Dhahran, Saudi Arabia Eram Talent is seeking a skilled Electrical Engineer with expertise in Buildings and Residential Projects to join their team in Saudi Arabia. The successful candidate will be responsible for designing, implementing, and supervising electrical systems in residential buildings and related structures. This role requires close collaboration with architects, contractors, and other engineering disciplines to ensure safe, efficient, and compliant electrical installations. If selected, this role would be onsite at Saudi Arabia. Responsibilities Provide engineering and construction support for electrical system ensuring adherence to the client's standards and local regulations. Assess and review electrical system designs to ensure conformance with project specifications and operational requirements. Perform electrical load analysis, circuit evaluations, and propose modifications or upgrades where necessary Assist in resolving electrical engineering challenges by applying accepted engineering practices and preparing necessary calculations and diagrams. Participate in developing cost estimates for electrical engineering work, including materials, labor, and equipment needs. Interpret and apply relevant codes and standards to ensure the highest quality of engineering deliverables. Supervise installation and commissioning of electrical systems on-site. Conduct site inspections and resolve any technical issues that arise during construction. Provide technical support and guidance throughout project lifecycle. Requirements Bachelor's degree in Electrical Engineering or related field. 7 to 12 years of experience in engineering, with a preference minimum 3 - 5 years’ experience in power distribution systems, Low Voltage system and building/residential projects. You will have strong understanding of electrical engineering principles related to power distribution, and compliance with national and international standards. Experience in collaborating with contractors, consultants, and government authorities is preferred. You will be able to interpret technical documents, including electrical schematics and compliance reports. Effective problem-solving and organizational skills are required to support project execution and ensure scopes and deadlines. Knowledge of cost estimation and procurement processes related to Electrical projects is preferred. Excellent problem-solving skills and attention to detail. Strong communication and interpersonal skills. Ability to manage multiple projects and work well within a team.

Location: Yanbu, Saudi Arabia; Al Jubail, Saudi Arabia Eram Talent is currently seeking a skilled Civil Supervisor - Maintenance specializing in Water Utility for a position based in Saudi Arabia. The Civil Supervisor is responsible for supervising and coordinating all civil maintenance activities related to water utility infrastructure, ensuring safe, reliable, and efficient operation of facilities. The role includes preventive, corrective, and emergency maintenance of civil assets such as reservoirs, pump stations, pipelines, chambers, concrete structures, buildings, drainage systems, roads, and utility infrastructure. The candidate must possess strong technical expertise in civil maintenance within the water utility industry, with hands-on experience in maintenance planning, execution, workforce supervision, and compliance with safety and quality standards. Responsibilities Supervise and coordinate all civil maintenance activities for water utility infrastructure and facilities. Execute preventive, corrective, and emergency maintenance works to ensure uninterrupted operations. Monitor maintenance and repair of reservoirs, pump stations, pipelines, valve chambers, and drainage systems. Inspect civil structures including concrete foundations, buildings, roads, and utility networks for defects and deterioration. Plan, schedule, and allocate manpower, materials, tools, and equipment for maintenance activities. Ensure all maintenance works comply with HSE regulations, quality standards, and approved engineering procedures. Coordinate with operations, mechanical, and electrical departments during shutdowns and maintenance execution. Prepare maintenance reports, inspection records, work progress updates, and support continuous improvement initiatives. Requirements Bachelor’s Degree in Civil Engineering from a recognized university. Minimum 5 years of experience in civil maintenance within water utility or infrastructure industries. At least 3 years of experience in a supervisory or team leadership role. Strong technical knowledge of civil maintenance for pipelines, concrete structures, pump stations, and utility facilities. Hands-on experience in preventive, corrective, and emergency maintenance planning and execution. Ability to read and interpret civil drawings, structural layouts, and maintenance documentation. Good understanding of HSE standards, permit-to-work systems, and quality control procedures. Strong leadership, communication, problem-solving, and team coordination skills.

Location: Dammam, Saudi Arabia Eram Talent is seeking a dedicated Aircraft Maintenance Technician to join our client's aviation maintenance team. The successful candidate will be responsible for performing inspections, maintenance, and repairs on various aircraft systems to ensure they meet safety and regulatory standards. Key Responsibilities Conduct routine maintenance and inspections on aircraft systems, including engines, avionics, hydraulics, and structural components. Diagnose mechanical and electrical issues and execute necessary repairs or replacements. Maintain accurate maintenance logs and records in accordance with aviation regulations. Collaborate with engineering and quality assurance teams to address technical challenges. Adhere strictly to safety protocols and maintenance procedures. Assist in troubleshooting and performing corrective actions as needed. Requirements Shall possess a complete training at a certificated aviation maintenance technician school. Shall have at least six (6) years’ experience in maintaining and repairing with commercial aircrafts. Shall be fluent in speaking, reading and writing English. Shall possess an airframe and power plant (A&P) certification from any approved aviation regulatory authority Saudi Arabian General Authority of Civil Aviation (“GACA”), United States Federal Aviation Administration (“FAA”), European Union Aviation Safety Agency (“EASA”), or other license from an International Civil Aviation Organization (“ICAO”) recognized state.

Location: Dammam, Saudi Arabia Eram Talent is currently recruiting for a skilled Aircraft Maintenance Engineer to join an established aviation maintenance team. The ideal candidate will be responsible for performing comprehensive maintenance, inspection, troubleshooting, and repair activities on various aircraft systems to ensure optimal safety and operational readiness. Key Responsibilities Perform scheduled and unscheduled maintenance on aircraft engines, avionics, airframe, and electrical systems. Diagnose mechanical and electrical faults and execute necessary repairs in compliance with manufacturer standards and aviation regulations. Maintain accurate and detailed maintenance records and documentation. Collaborate closely with maintenance teams, engineers, and quality assurance to support continuous improvement and adherence to safety protocols. Support regulatory inspections and audits to ensure compliance with aviation safety standards. Participate in troubleshooting complex technical issues and provide corrective actions. Requirements A degree in Aeronautical or Mechanical Engineering or a related engineering discipline from an accredited institution. Shall have at least five (5) years of experience in Aircraft maintenance engineering or technical services within a commercial aviation environment. Shall have detailed knowledge in regulatory authorities (FAA, GACA, EASA) fundamental design and operation rules. Shall have demonstrated knowledge of Aircraft systems, maintenance programs, reliability analysis, and modification control Shall be fluent in speaking, reading and writing English.

Location: Jeddah, Saudi Arabia; Riyadh, Saudi Arabia; Tabuk, Saudi Arabia Eram Talent is seeking a dedicated and efficient Warehouse Operative for our client based in Saudi Arabia. We are looking for a reliable and motivated Warehouse Operative to join our supply chain team. The role involves receiving and inspecting materials, inventory handling, documentation, and supporting warehouse operations while following safety procedures. Job Responsibilities. Receive, inspect, and record incoming materials Manage stock and warehouse inventory Prepare and maintain warehouse documentation and labels Follow safety procedures and participate in safety trainings Support daily warehouse and supply chain operations Communicate effectively with team members and customers Requirements Diploma required (Warehouse, Logistics, Supply Chain, or related field preferred) Minimum 5 years of experience in warehouse, logistics, or supply chain operations Receive, inspect, and record incoming materials and shipments accurately Manage warehouse inventory and ensure proper stock handling and storage Prepare and maintain warehouse documentation, labels, and records Support daily warehouse and supply chain operations efficiently Follow all safety procedures and maintain a safe working environment Use SAP system for inventory tracking and warehouse operations Coordinate with team members and departments to ensure smooth workflow

Location: UK, London Workplace: OnSite Here at Humanoid, we believe in a future where robots amplify human potential. That’s why we’ve set out on a mission to build the world’s most capable, commercially-scalable, and safe humanoid robots. We’re bringing that mission to life with HMND‑01 - our rapidly developed humanoid platform being deployed in real industrial environments - and we’re growing the team to take it even further. ABOUT THE ROLE We are looking for a Senior Hardware Test Engineer to own the test methodology for HMND‑01’s hardware components, robot subsystems, and complete humanoid robots. You will be the engineer who decides what “good” looks like — from a single actuator on the bench to a full robot walking through an integration sequence. This is a hands-on, technical leadership role. You will design test methods, run them yourself on early prototypes, and partner closely with the test automation team, Manufacturing Engineering, Production Operations, and Supply Chain Quality as we move from EVT toward production. You’ll be the hardware voice that shapes what gets measured on the line, at what tolerance, and why — without owning the QC routine or rig build, which sit with Production Ops Quality and Manufacturing Engineering respectively. KEY RESPONSIBILITIES 1. TEST METHOD DEFINITION - Component-Level Methods: Define functional, performance, and stress tests for individual hardware components — actuators, sensors, electronics, structural parts — including pass/fail criteria and required data capture. - Subsystem Testing: Design integration tests for major robot subsystems (arms, hands, legs, torso, head) covering kinematic accuracy, repeatability, load behavior, and thermal response. - Whole-Robot Testing: Define and execute system-level tests for full robot assemblies, including end-to-end motion sequences, balance, manipulation tasks, and failure-mode behavior. 2. HANDS-ON TEST EXECUTION - Prototype Bring-up: Be the first engineer to put hands on each new hardware revision, characterizing performance against design intent and feeding findings back to the design team. - Failure Analysis: Investigate failures during testing, work with hardware engineers to root-cause issues, and verify fixes. - Test Documentation: Capture methods, results, and learnings in a way that the rest of the organization can repeat and trust. 3. AUTOMATION SUPPORT - Test Automation Inputs: Translate manual test methods into specifications for the automation team. Decide which tests can be automated and which must remain manual, and why. - Tooling: Specify and prototype custom test fixtures, jigs, and instrumentation needed to execute your methods reliably during prototype and bring-up work. - Data: Define what each test must capture so that automated runs produce results comparable to your manual baseline. 4. PRODUCTION TEST — IN PARTNERSHIP WITH MANUFACTURING ENGINEERING AND PRODUCTION OPS - Requirements for Line Rigs & Jigs: Provide the technical requirements for production test jigs, fixtures, and test beds — what they measure, at what tolerance, what data they need to capture, and the pass/fail criteria. Manufacturing Engineering owns rig design, build, and commissioning; you review designs and sign off on whether they actually verify what they’re meant to verify. - In-Process Verification: Define the checks at each stage of assembly that confirm components and sub-assemblies have been built correctly before they move to the next station, including required measurements and rework paths for failures. - Test Evidence & Traceability: Define what each production test must capture so that results, measurements, and pass/fail outcomes are written to the production database, linked to the serial number of the unit under test — every shipped robot has a complete and queryable build and test history. - System-Level Acceptance: Define final-product acceptance tests — performance envelopes, functional gates, and sign-off criteria for a robot leaving the line. 5. QUALITY & DESIGN FEEDBACK LOOP — IN PARTNERSHIP WITH SUPPLY CHAIN QUALITY AND PRODUCTION OPS QUALITY - Component Performance Characteristics: Define the system-level performance characteristics that incoming parts must meet. Supply Chain Quality translates these into incoming inspection criteria and supplier qualification plans, and runs the inspection process. - Root-Cause Partnership: Partner with Production Ops Quality on root-cause analysis when line failures trace back to component behavior or system design, and feed findings back into engineering. - Closed Loop with Design: Treat test data as a closed loop with design — surface trends from production into design reviews so the product gets better, not just the process. QUALIFICATIONS Must-Have: - Experience: 5+ years in hardware test engineering, with hands-on testing of complex electromechanical systems — robotics, automotive, aerospace, or similar. - Test Methodology: Strong grasp of test theory, test design, and pass/fail criteria definition. You can write a test spec that another engineer can execute without follow-up questions. - Mechanical: Solid understanding of mechanical design principles, common core components (gears, bearings, actuators), measurement tools (calipers, micrometers, load cells, encoders), and technical drawings including GD&T basics. - Electrical: Comfortable reading schematics, using a multimeter and oscilloscope, and reasoning about basic power and signal integrity. - Production Fluency: Familiarity with hardware production operations — flow, takt, work instructions, traveler documentation — enough to collaborate effectively with Manufacturing Engineering and Production Ops without trying to own their work. - Tooling: Experience with test and task tracking systems (Jira, X-Ray, TestRail, or similar). - Matrix Operating Style: Comfortable influencing test stations, rigs, and equipment design through clear requirements and tight partnership, not through ownership. - Mindset: Systems thinking — you naturally see how a problem at the component level can manifest as a behavior at the full-robot level. Nice-to-Have: - Robotics experience, especially with serial-link manipulators or legged systems. - Hands-on test rig and fixture design experience (mechanical and/or electrical) — useful for speaking the same language as Manufacturing Engineering on rig requirements. - Python (or similar) for ad-hoc data analysis and lightweight test automation. - CAD (SolidWorks/Fusion/NX) for sketching test fixtures. - Familiarity with ROS2. - Experience with embedded systems and field buses such as CAN or EtherCAT. - Experience with industrial automation equipment (servos, gateways, sensors, PLCs). - Knowledge of statistical quality control fundamentals (SPC, MSA) — for working effectively with Quality on test data interpretation. WHAT YOU'LL BE TESTING - Actuators (motors, gearboxes, encoders, drivers) - Robot manipulators and end-effectors - Legged subsystems and balance behaviors - Power and battery systems - Full humanoid robot assemblies