Вакансии

Location: Annapolis, MD; Lanham, MD Position Objective: This position provides direct patient care and functions as a resource person for one or more specialties, while demonstrating basic patient care concepts, surgical asepsis and basic surgical case preparation. Essential Job Duties: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Maintains a safe environment for the patient and the O.R. team by assuring a sterile environment, using equipment according to operating room manual. Transports patients and specialty equipment in accordance with safety policy. Provides patient care during the intra-operative phase of the surgery using physician preference cards and organizing and prioritizing care activities based on the patient and/or environmental changes. Functions as a first scrub in the following types of cases (including but not limited to): general/GYN, ENT, plastics, basic/minor ortho/neuro, dental/ortho, urology/cysto and basic vascular procedures, and demonstrates proper care of instrumentation including cleaning and sterilization of surgical equipment. Performs the following surgical skills independently: Opening surgical supplies, gowning and gloving all members of the surgical team, basic positioning of the patient, between case cleaning, terminal cleaning of the ORs and surgical suite, performs circulating skills and tasks as directed. Educational/Experience Requirements: Graduate from an accredited surgical technologist program or its equivalent. Employed for a minimum of 3 years at AAMC or has a minimum of 3 years of surgical technology experience. Required License/Certifications: Surgical Technologist certification American Heart Association Healthcare Provider BLS Working Conditions, Equipment, Physical Demands: There is a reasonable expectation that employees in this position will be exposed to blood-borne pathogens. Physical Demands - The physical demands and work environment that have been described are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with the Americans with Disabilities Act. The above job description is an overview of the functions and requirements for this position.  This document is not intended to be an exhaustive list encompassing every duty and requirement of this position; your supervisor may assign other duties as deemed necessary. Luminis Health Benefits Overview: Medical, Dental, and Vision Insurance. Retirement Plan w/employer contribution. Paid Time Off. Employee Tuition Assistance Benefits. Employee Referral Bonus Program Employer Paid Holidays, Disability, and Life/AD&D for full time employees Wellness Programs/Employee Assistance Programs and more Pay Range $30 — $45 USD Luminis Health Benefits Overview: •    Medical, Dental, and Vision Insurance •    Retirement Plan (with employer match for employees who work more than 1000 hours in a calendar year) •    Paid Time Off •    Tuition Assistance Benefits •    Employee Referral Bonus Program •    Paid Holidays, Disability, and Life/AD&D for full-time employees •    Wellness Programs •    Employee Assistance Programs and more *Benefit offerings based on employment status Opt-in for text notifications! Luminis Health's two-way SMS texting platform lets you receive notifications and messages from our Talent Acquisition team directly on your phone. To enable this feature, select "yes" when asked to "opt-in to receive text messages" and to "Receive updates from a recruiter about this job via SMS" when completing your application. Once you are opted in, you can easily opt-out at any time. Standard text messaging rates may apply based on the candidate's mobile carrier plan. Luminis Health is not responsible for any charges incurred by the recipient. Candidates are encouraged to review their mobile carrier's plan for applicable text messaging rates and usage charges.

Location: Meridian, MS Medical Director/ Attending Physician Location: Meridian, MS Schedule: Full-Time Salary: Negotiable About Infinite Medical P.C. Infinite Medical P.C. is a nationwide network of advanced practice providers and specialty clinicians committed to delivering high-quality, proactive care directly to residents in skilled nursing and long-term care facilities. Our partnership with MedElite Healthcare Management Group empowers us to focus on what matters most: providing compassionate, personalized care that meets the unique needs of each resident. Together, we champion continuous innovation and collaboration in our shared mission to redefine senior care across the country. Job Summary We are seeking a dynamic and compassionate Medical Director/ Attending Physician to join our team. As the Medical Director/ Attending Physician, you will play a key role in overseeing the delivery of comprehensive care to patients, ensuring high-quality service, and promoting best practices across the healthcare team. You will provide leadership, guidance, and direction to clinical staff, fostering a collaborative environment while maintaining the highest standards of patient care. This is an exciting opportunity to make a meaningful impact on patient outcomes and contribute to the growth and development of our medical team. Responsibilities Provide ongoing oversight, mentorship, and clinical guidance to the medical staff to maintain high standards of care Foster a collaborative environment that promotes best practices and continuous professional development Lead the interview and credentialing process for prospective medical staff Chair or co-chair the Quality Assurance and Performance Improvement (QAPI) Committee on a quarterly basis Assist in Department of Health (DOH) survey preparedness, ensuring compliance with state and federal regulations Lead the implementation of new clinical programs and initiatives Stay informed of advancements in geriatric and long-term care to continuously evolve the facility’s clinical offerings Provide direct patient care to residents, ensuring the highest quality of clinical treatment and support Requirements Certified Medical Director (CMD) certification is preferred. Extensive experience in long-term care (LTC) or skilled nursing facility settings. Strong leadership, communication, and team-building skills. In-depth knowledge of regulatory requirements and quality improvement processes in long-term care Ability to collaborate with interdisciplinary teams and external stakeholders to enhance patient care and facility operations Prolonged standing and walking on facility floors. Carrying a medical bag, laptop, tablet or diagnostic equipment. Bending, stooping, or assisting with positioning during exams. Navigating multi-level buildings, potentially with stairs or uneven surfaces. Lifting/moving patients. Benefits Competitive salary per annum: Negotiable Health Dental Vision 401K Company-Sponsored Life Insurance Paid Time Off Malpractice Insurance Paid - Subscription to UpToDate Why Work With Us? Make a meaningful impact on the lives of seniors Work in a collaborative, mission-driven environment Enjoy work-life balance Equal Opportunity Employer Infinite Medical P.C is an equal-opportunity employer. We acknowledge and honor the fundamental value and dignity of all individuals. We pledge ourselves to crafting and maintaining an environment that respects diverse traditions, heritages, and experiences. Infinite Medical P.C is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above-noted job description is not intended to describe, in detail, the multitude of tasks that may be assigned but rather to give the applicant a general sense of the responsibilities and expectations of this position. As the nature of business demands change so, too, may the essential functions of the position. Ready to Make a Difference? Apply today and help us deliver compassionate, personalized care where it matters most. #INDH

Location: Springfield,MO Position Summary: Seeking a driven and motivated engineer to join our sales team focusing on growing business with existing customers and developing new business. This position will involve applications engineering, sales support and field service work. Sales Engineers should be comfortable working in a result-driven, fast-paced environment. Position will involve extensive formalized training plus work under a mentor, developing skills and gaining an understanding of CaptiveAire products, how we go to market, application engineering processes etc. as well as business development and sales strategies. Why Work for CaptiveAire ? N ation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment.  Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible pric e Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for P rofessional E ngineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: There is never a day you don’t learn something new a t CaptiveAi re . I am able to learn something new due to the freedom to take on new tasks independently and problem solv e. I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the in-office work environment.I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. One of the things I appreciate most about CaptiveAire is how strongly it embodies the entrepreneurial spirit. I’m empowered with the autonomy to manage my work independently, while also benefiting from the robust support and resources of a large, well-established company . CaptiveAire is fast-moving and no- nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: A technical sales role encompasses a wide variety of tasks where one day does not look exactly like the next. The projects our team handle s are high in volume and unique from one another, spanning throughout the whole course of design, procurement, coordination, and post-sale support. Typical tasks include: Outside sales meetings and calls to build relationships with existing and new customers Application engineering to apply our products using sound engineering principles Project management of installations in progress - M anaging schedules/plans to guarantee we can get equipment on site when the site needs it, in turn creating satisfied and returning customers. Service and technical support of existing equipment Supporting end users to maintain high levels of customer service, from assisting contractors with wiring on site to remote troubleshooting for staff in the kitchen. T wo to three full days per week in the office working on bids, one to two days on job sites, and dedicate another day to developing the territory. Territory development may include giving presentations to the engineering community, visiting new customers, or expanding contacts with an existing account. Comments from some of ou r sales engineers: Every day I get to help someone. Whether it's an engineer with a design, a contractor with a troubleshooting issue, or an end user looking for help to obtain better indoor air quality. I get to use my engineering skills, people skills and business skills every day. Our main "role" is not to sell products but to provide solutions - kitchen ventilation solutions, commercial ventilation solutions, heating/air conditioning solutions. I enjoy getting to work directly with end users and helping them complete their business goals. Attending a soft opening after completing a full design-build project with an owner is rewarding. I love the balance between working on designs in the office and also having that face to face interaction with our customers. It's awesome to handle the design phase of a project, then also take charge of the procurement process with the end user/customer and lastly watch our equipment perform as designed once installed and the project is complete. I also love the growth aspect of my role, I enjoy molding and shaping our business in order to set it up for success and then see the value we are adding to the market. Primary Job Responsibilities: Provide integrated application engineering and design support for a wide range of ventilation applications with the goal of providing sustainable products and the latest technologies best designed to meet the customers’ needs. Work directly with Engineers, Contractors, End Users, and Food Service Dealers. Daily tasks include inside sales support, application engineering and outside sales. Responsibilities will vary and may include presentations, quotes, submittals, technical product support, job site visits and hands on troubleshooting as needed. Educate and promote CaptiveAire products to users in your market.  This includes conference calls, meetings, organizing presentations, and product demos. Research and develop new business opportunities with new and existing users. Top notch customer service and willingness to go above and beyond to serve the customer. Quick turnaround times a priority. Continuously evaluate and improve processes as well as the customer experience. Required skills: 0-5 years experience 4 year technical degree in a mechanical, electrical, construction or science-oriented curriculum preferred Excellent computer, organizational and communication/presentation skills Problem solving with a passion for continuous learning Strong desire to interface with the customer Embrace new technologies and business savvy Passion for work with aggressive nature to succeed Willing to travel for various training opportunities If not already completed, expectation of FE Exam completion in area of study for engineering graduates within 6 months of employment with CaptiveAire MUST BE A “GO GETTER”! Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $70k-$100k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time, we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. #LI- TL1 #P1

Location: Belgrade, Serbia; Nicosia, Cyprus; Bogota, Colombia; Tbilisi, Georgia; Atlanta, United States Workplace: remote At AI Digital, we are continuously building the future of digital marketing. We partner with ambitious brands, scale complex media ecosystems, and help our clients grow through data, technology, and smart strategy. If you don’t see a role that matches your background right now, that doesn’t mean we shouldn’t connect. We’re always interested in connecting with talented professionals across Client Service, Digital Media, Programmatic Advertising, AI-powered marketing solutions, Strategy, Marketing Operations, Analytics, Design, and broader AdTech ecosystems. If you’re excited about building impactful digital solutions and think you could contribute to our journey, let’s connect! We value people who • Bring relevant experience in digital marketing, adtech, client service, media, strategy, or related fields • Think analytically and approach challenges with curiosity and ownership • Communicate clearly and confidently • Thrive in fast-moving, collaborative environments • Are motivated by impact, growth, and continuous improvement What you can expect from us • Competitive compensation aligned with your experience • Flexible remote work • Exposure to enterprise-level clients and complex digital ecosystems • Real ownership and room to grow • A supportive, high-performance team culture

Location: West Union, IA Position Summary : The primary role of the Industrial Engineering position is to fully document and support a variety of products in production and standardize them across all manufacturing facilities. Responsible for continuous product, process, and equipment/automation improvements utilizing productivity and efficiency data. The candidate must establish a high level of knowledge over the product or products they oversee. Why Work for CaptiveAire? Nation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment. Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible price Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: One of the things I appreciate most about CaptiveAire is how strongly it embodies the entrepreneurial spirit. I’m empowered with the autonomy to manage my work independently, while also benefiting from the robust support and resources of a large, well-established company. We want to stay on the cutting edge and so are constantly sourcing and utilizing the best equipment available. Any position can provide feedback that is listened to and incorporated into processes. Collaboration is key at CaptiveAire and so there is no being “Silo-ed” into one area. CaptiveAire is fast-moving and no-nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: A typical day often includes collaborating with our manufacturing team to better understand day-to-day processes and roadblocks. The team then documents and creates opportunities for improvement and partners with supervisors & managers to ensure a smooth implementation process of these solutions. Workshopping ideas with other IEs at different plant locations is essential to ensure a companywide implementation success. Typical tasks also include taking a lead role in project and process implementation across all plants, facilitating communication and task completion and serving as center point of communication across all manufacturing plants. From an IE: Continuous improvement is a heavy focus and so there is an ability to get involved in tasks that range from small quick process improvements to larger company-wide projects that must be collaborated with directors. IEs often have ownership of a project from concept to sustainability and so it is easy to have a sense of pride and accountability in the work we do. The IE team also assists in finding additional automation as well as researching the best way it can be utilized by our plants, which offers many opportunities to expand our current knowledge. Primary Job Responsibilities: Implement New Products and Design Changes into manufacturing facilities. Ensure that there is exact duplication of products and process between manufacturing facilities. Become the product expert with a select product or group of products for all manufacturing facilities. Document product builds and instructions using Dozuki software. Review and Implement product ECNs at manufacturing plants. Ensure perfect quality assurance of all managed products and address manufacturing issues associated with these products. Job Requirements: 0-10 yrs experience 4-year technical degree preferably in Industrial Engineering Internship/co-op experience is preferred Must enjoy hands on product exposure Electrical skills and experience needed AutoCAD or similar software a must Multi-tasking, problem solving and strong communication skills a must Strong emphasis on perfect product quality and to maintain a safe work environment Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $65k-$85k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time, we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. #P1

Location: West Union, IA Position Summary : This role will be working within the manufacturing facility and will be responsible for maintaining facility organization, quality and improving manufacturing efficiency. Why Work for CaptiveAire? Nation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment. Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible price Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the environment, particularly in a world where remote work is common. I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. One of the things I appreciate most about CaptiveAire is how strongly it embodies the entrepreneurial spirit. I’m empowered with the autonomy to manage my work independently, while also benefiting from the robust support and resources of a large, well-established company. We want to stay on the cutting edge and so are constantly sourcing and utilizing the best equipment available. Any position can provide feedback that is listened to and incorporated into processes. Collaboration is key at CaptiveAire and so there is no being “Silo-ed” into one area. CaptiveAire is fast-moving and no-nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: Review logged internal quality issues to identify areas for improvement and develop means to eliminate issues from occurring (RCA’s) Spend time on the plant floor observing all aspects of manufacturing and identify and improve manufacturing waste. Collaborate, organize, and lead multi-team departmental Kaizen events to improve workstation organization, overall workflow, and throughput. Majority of the day will be spent on the production floor, observing and implementing permanent solutions to Safety, Quality, and Production issues. Works with Safety, Quality, and Production teams to plan out and implement process improvements. Implement error-proofing processes to ensure consistent high-quality products for end users. From a Quality Engineer: Always learning the different manufacturing roles with a hands-on approach to better understand the process and challenges. If you haven’t done the job yourself, how can you make it better? Primary Job Responsibilities: Help maintain a continuous improvement mentality with focus on Kaizen (small change for the better) across your facility Observe, investigate, and effectively communicate process improvement projects to all relevant stakeholders Collaborate with plant management and the corporate Continuous Improvement Lead to execute on process enhancements that maximize productivity for your location Proactively looks for process improvements and reducing or eliminating manufacturing waste in daily workflows Lead cross-functional teams while implementing 6S projects in various manufacturing workspaces Coach and mentor others on Kaizen, lean manufacturing, and 6S methodologies and practices Drive the standardization of processes and implementation of projects as assigned by the quality manager and corporate Continuous Improvement Lead Analyze and evaluate existing facility processes and procedures. Discuss possible Safety, Quality and Productivity related improvements to plant management and the corporate Continuous Improvement Lead Additional tasks on an as needed basis as defined by the Quality Manager Report directly to the Quality Manager at your facility Travel up to 5% Job Requirements: 2-4 years’ experience in a manufacturing environment with a focus on quality 4-year technical degree, in an electrical, electronics or mechanically oriented curriculum Excellent communication skills Must be meticulous and have exceptional attention to detail Must have experience analyzing data and identifying trends Multi-tasking and problem-solving a must Strong emphasis on perfect product quality and to maintain a safe work environment Physical Requirements: Ability to work standing for extended periods of time Required to use ladder, forklift or other means to acquire parts for product assembly Able to use power & hand tools, as well as electrical testing and measuring equipment Ability to lift 35 to 50 pounds independently Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $65k-$95k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. This position is classified as a safety-sensitive position.  Employees in this position are subject to drug and alcohol testing in accordance with CaptiveAire’s Drug-Free Workplace policy. #P1

Location: Brooklyn, NY Assistant Director of Education Reports To: Chief Medical Officer Total Annual Compensation: $105,000 - $110,000 Employment Type: Full-Time Location: Brooklyn, NY About Infinite Medical P.C. Infinite Medical P.C. is a nationwide network of advanced practice providers and specialty clinicians committed to delivering high-quality, proactive care directly to residents in skilled nursing and long-term care facilities.  Our partnership with MedElite Healthcare Management Group empowers us to focus on what matters most: providing compassionate, personalized care that meets the unique needs of each resident. Together, we champion continuous innovation and collaboration in our shared mission to redefine senior care across the country. Job Summary The Assistant Director of Education plays a key leadership role in developing, implementing, and maintaining the organization’s clinical education. This position supports the training and onboarding of physicians, nurse practitioners (NPs), and physician assistants (PAs), ensuring high standards of clinical quality, compliance, and continuous improvement across all provider teams. Responsibilities Assist in Provider Onboarding & Training Support the development of standardized training materials, checklists, and competency evaluations. Collaborate with the Director of Education to promote clinical excellence, patient safety, and compliance with best practices. Assist with the organization of the Grand Rounds sessions, including scheduling speakers and preparing educational materials and ppts. Monitor continuing medical education (CME) requirements and ensure providers have access to accredited learning opportunities (UpToDate). Identify educational needs through performance data, provider feedback, and clinical audits. Assist with quality improvement initiatives, chart reviews, and provider performance evaluations. Serve as a liaison between clinical operations, education, and HR to ensure seamless onboarding and provider retention. Mentor and support providers in clinical skill development, professionalism, and patient communication. Collaborate with physician leaders and medical directors to align education programs with clinical goals. Maintain organized records of training completion and competency assessments. Contribute to curriculum development. Support the Director of Education in long-term strategic planning for provider education initiatives. Requirements Licensed Physician Assistant (PA-C) or Nurse Practitioner (NP) with active certification and good standing in the state of practice. 3–5 years of clinical experience in a healthcare setting (primary care, hospital medicine, or specialty practice). Demonstrated experience in provider education, preceptorship, or training coordination. Computer work including keyboard and mouse use for extended periods. Occasional standing for presentations. Prolonged sitting. Strong organizational and communication skills, with the ability to engage diverse provider groups. Proficiency with electronic medical records (EMR) and basic data reporting tools (Excel, LMS platforms, etc.). Preferred: Experience in a leadership or educational administration role. Familiarity with clinical competency frameworks and adult learning principles. Knowledge of accreditation and CME processes. IMG and FMG (international medical graduate or foreign medical graduate Clinical/ healthcare background Advanced degree or certification in medical education, leadership, or healthcare administration (a plus, not required). Benefits Total Annual Compensation: $105,000 - $110,000 Health Dental Vision 401K Company-Sponsored Life Insurance Student Loan Repayment Program Paid subscription to UpToDate Paid Time Off Malpractice insurance coverage Why Work With Us? Make a meaningful impact on the lives of seniors Work in a collaborative, mission-driven environment Enjoy work-life balance Equal Opportunity Employer Infinite Medical P.C is an equal-opportunity employer. We acknowledge and honor the fundamental value and dignity of all individuals. We pledge ourselves to crafting and maintaining an environment that respects diverse traditions, heritages, and experiences. Infinite Medical P.C is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above-noted job description is not intended to describe, in detail, the multitude of tasks that may be assigned but rather to give the applicant a general sense of the responsibilities and expectations of this position. As the nature of business demands change so, too, may the essential functions of the position. Ready to Make a Difference? Apply today and help us deliver compassionate, personalized care where it matters most. #INDL

Location: Bronx, NY QM Specialty NP / PA Location: Bronx, NY (In-Person) Schedule: Part-Time (2 days/ week) Salary per annum: $60,000 - $90,000 About Infinite Medical P.C. Infinite Medical P.C. is a nationwide network of advanced practice providers and specialty clinicians committed to delivering high-quality, proactive care directly to residents in skilled nursing and long-term care facilities. Our partnership with MedElite Healthcare Management Group empowers us to focus on what matters most: providing compassionate, personalized care that meets the unique needs of each resident. Together, we champion continuous innovation and collaboration in our shared mission to redefine senior care across the country. Job Summary We are seeking a dedicated and compassionate QM Specialty NP / PA to join our facility in the Bronx, NY . As a QM Specialty Provider, you will provide comprehensive primary care services via telehealth to a diverse patient population. This is a part-time position ideal for a provider who values meaningful patient relationships and a collaborative care environment. Responsibilities Conduct assessments, diagnose, and develop treatment plans tailored to patient needs Manage chronic diseases and acute conditions Collaborate with interdisciplinary teams to enhance patient care Maintain accurate and timely medical records in compliance with documentation standards. Assist with quality management (QM) initiatives, including compliance audits, clinical evaluations, and outcome tracking Ensure adherence to regulatory guidelines and clinical protocols Provide guidance and support to healthcare team members regarding best practices and performance improvement initiatives Perform physical exams and medical history assessments Collaborate with facility staff and interdisciplinary teams Educate patients and families about treatment options and care goals Ensure a safe, respectful, and supportive environment for residents Requirements Extensive experience in long-term care (LTC) or skilled nursing facility settings. In-depth knowledge of regulatory requirements and quality improvement processes in long-term care Ability to collaborate with interdisciplinary teams and external stakeholders to enhance patient care and facility operations Strong clinical judgment, communication, and patient engagement skills Proficiency with electronic medical records (EMR) and telehealth technology Active and unrestricted Nurse Practitioner, Physician Assistant, or Physician license State-specific license in good standing in New York Minimum 6 months of experience in long-term care or a skilled nursing facility Strong communication, clinical, and critical thinking skills Passion for elder care and person-centered healthcare Prolonged standing/walking. Occasional lifting up to 20 lbs. Computer work. Lifting/moving patients. Prolonged sitting. Benefits Competitive salary per annum: $60,000 - $90,000 Paid subscription to UpToDate Malpractice Insurance Why Work With Us? Make a meaningful impact on the lives of seniors Work in a collaborative, mission-driven environment Enjoy work-life balance Equal Opportunity Employer Infinite Medical P.C is an equal-opportunity employer. We acknowledge and honor the fundamental value and dignity of all individuals. We pledge ourselves to crafting and maintaining an environment that respects diverse traditions, heritages, and experiences. Infinite Medical P.C is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above-noted job description is not intended to describe, in detail, the multitude of tasks that may be assigned but rather to give the applicant a general sense of the responsibilities and expectations of this position. As the nature of business demands change so, too, may the essential functions of the position. Ready to Make a Difference? Apply today and help us deliver compassionate, personalized care where it matters most. #INDL

Location: St. George, UT Position Summary : Seeking a driven and motivated engineer to join our engineering team focusing on application engineering for our diverse line of HVAC equipment. Application Engineers should be comfortable working in a result-driven, fast-paced environment. As an Application Engineer at CaptiveAire, you will play a key role in shaping, advancing, and supporting innovative HVAC solutions for a wide range of real world applications. Why Work for CaptiveAire? Nation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment.  Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible price Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the environment, particularly in a world where remote work is common. I love how CaptiveAire is all about connections, with customers, coworkers, end users, and everyone in between. Knowing that the company truly has an owner and leadership team that cares for the employees. At CaptiveAire each employee is more than a number, they are a valued member of a growing and diverse team. The open-door policy at CaptiveAire means that no matter who you are in the company that leadership is open to hear your comments and concerns. This means that your ideas are heard. Not once in my time here at CaptiveAire have I felt like I was anything less than an asset to this company and a valued member of the team. We want to stay on the cutting edge and so are constantly sourcing and utilizing the best equipment available. Any position can provide feedback that is listened to and incorporated into processes. Collaboration is key at CaptiveAire and so there is no being “Silo-ed” into one area. CaptiveAire is fast-moving and no-nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: An Application Engineer role encompasses a wide variety of tasks where one day does not look exactly like the next. Typical tasks can include: Exploring different applications and equipment types to help sales engineers meet the requirements of various projects and designs. Includes design reviews, providing answers to product/application related questions, and researching new and complex applications. Developing training for internal sales engineering team. Collaboration with sales, R&D, and service teams to ensure high quality outcomes for all projects. From an Application Engineer: I enjoy that it's usually something new every day, because although we work on similar applications, they are never exactly the same. That gives the opportunity find better ways to approach a problem, dive deep into standards and best practices, and learn something new from the involved parties. Its always a great feeling when something I've helped with turns out well for the sales office and end user. Primary Job Responsibilities: Responsible for working with internal sales staff along with internal Engineering team to help design sustainable mechanical ventilation and control strategies for a wide variety of commercial applications. Provide a comprehensive final review of critical projects to ensure accuracy, quality and alignment with CaptiveAire design standards. Work directly with sales engineers to deliver real‑time technical guidance and resolve design questions efficiently. Research unique or emerging applications and develop training resources (such as webinars, support pages, and design tools) to help sales staff confidently present and sell equipment for these applications. Review and analyze remote monitoring data. Job Requirements: BS in Engineering- mechanical or electrical preferred 0-5yrs engineering experience Knowledge of HVAC/Ventilation systems preferred Must be able to manipulate data to derive trends and useful facts using Excel or similar software. Must have strong communication skills, with the ability to discuss complex mechanical equipment and controls with a wide range of audiences, ranging from highly technical engineers down to non-technical owners. Must be a self-starter, able to handle long term tasks with little guidance. THIS IS NOT A REMOTE ROLE. Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $65k-$90k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. #P1 #TL-LI

Location: Worldwide Workplace: hybrid COLUMBIA SHIPMANAGEMENT is looking for self-motivated and skilled seafarers to join our expanding fleet.     JOB DESCRIPTION   Responsible for the safety equipment and Voyage plan of the vessel. Holder of valid COC (STCW Reg II/1) with verification. Holder of valid STCW certifications required for the position. Good communication and leadership skills. Fluent in written and spoken English language. Experience with multicultural working environment. Safety culture and mindset.   VESSEL'S SPECIFIC REQUIREMENTS   Minimum experience requirements: 6 months in Rank with the same type/size of vessel. Experience onboard same vessel tonnage is mandatory. Experience in Steam Turbines cargo pump system is recommended. Experience with Crude Oil and STS cargo operations. Experience in trading area USA and Australia is recommended.   CONTRACT TERMS & CONDITIONS   Contract Duration [5 months +/- 1 months] Contract Benefit: competitive salary Terms and condition as per CBA applicable Rejoining Bonus Free Internet onboard and wellbeing support   You may include with your application any reference, specific job qualification, and your availability date. Looking forward to welcoming you in the Columbia Family.

Location: Vermont Travel Certified Nursing Assistant Location: Vermont Schedule: Full-time (5 days per week) Salary: $50,000 - Based on an average of 38 patients seen per day worked; eligibility for a bonus for each additional patient seen beyond this number About Infinite Medical P.C. Infinite Medical P.C. is a nationwide network of advanced practice providers and specialty clinicians committed to delivering high-quality, proactive care directly to residents in skilled nursing and long-term care facilities.  Our partnership with MedElite Healthcare Management Group empowers us to focus on what matters most: providing compassionate, personalized care that meets the unique needs of each resident. Together, we champion continuous innovation and collaboration in our shared mission to redefine senior care across the country. Job Summary Infinite Medical P.C. is seeking professional and compassionate full-time Certified Nursing Assistant to facilitate consults within a nursing home facility on behalf of our medical team. You will be assisting providers in Nursing Homes with a tablet device. A strong candidate will have great interpersonal skills and the ability to create a supportive environment. Responsibilities Coordinating with the designated facility contact for each location Following a pre-established list from the office to ensure that all patients are seen and provided with appropriate care Performing additional duties as required to facilitate medical services and clinical monitoring Traveling to various facilities across different states as needed to support operations Requirements Certified Nursing Assistant (CNA Board Certified ) Ability or experience working in a fast-paced environment Demonstrate the ability to maintain composure when confronted by difficult situations and to respond appropriately Flexibility to travel on short notice Currently resides in the state of Vermont License to drive Must be able to lift a minimum of 20 pounds and stand / walk / work on your feet up to 6-8 hours per day Benefits Competitive salary: $50,000 - Based on an average of 38 patients seen per day worked; eligibility for a bonus for each additional patient seen beyond this number Health Dental Vision 401K Company-Sponsored Life Insurance Paid Time Off Malpractice Insurance Why Work With Us? Make a meaningful impact on the lives of seniors Work in a collaborative, mission-driven environment Equal Opportunity Employer Infinite Medical P.C is an equal-opportunity employer. We acknowledge and honor the fundamental value and dignity of all individuals. We pledge ourselves to crafting and maintaining an environment that respects diverse traditions, heritages, and experiences. Infinite Medical P.C is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above-noted job description is not intended to describe, in detail, the multitude of tasks that may be assigned but rather to give the applicant a general sense of the responsibilities and expectations of this position. As the nature of business demands change so, too, may the essential functions of the position. Ready to Make a Difference? Apply today and help us deliver compassionate, personalized care where it matters most. #INDL

Location: Worldwide Workplace: hybrid COLUMBIA SHIPMANAGEMENT is looking for self-motivated and skilled seafarers to join our expanding fleet.     JOB DESCRIPTION   Responsible for the safety equipment and Voyage plan of the vessel. Holder of valid COC (STCW Reg II/1) with verification. Holder of valid STCW certifications required for the position. Good communication and leadership skills. Fluent in written and spoken English language. Experience with multicultural working environment. Safety culture and mindset.   VESSEL'S SPECIFIC REQUIREMENTS   Minimum experience requirements: 6 months in Rank with the same type/size of vessel. Experience onboard same vessel tonnage is mandatory. Experience in Steam Turbines cargo pump system is recommended. Experience with Crude Oil and STS cargo operations. Experience in trading area USA and Australia is recommended.   CONTRACT TERMS & CONDITIONS   Contract Duration [5 months +/- 1 months] Contract Benefit: competitive salary Terms and condition as per CBA applicable Rejoining Bonus Free Internet onboard and wellbeing support   You may include with your application any reference, specific job qualification, and your availability date. Looking forward to welcoming you in the Columbia Family.

Location: Hollywood, FL Nursing Care Coordinator (LPN / RN) Location: Hollywood, FL (In-Office) Schedule: Full-Time; 9:00 am - 5:30 pm Salary: $30.00 an hour- $35.00 an hour About Infinite Medical P.C. Infinite Medical P.C. is a nationwide network of advanced practice providers and specialty clinicians committed to delivering high-quality, proactive care directly to residents in skilled nursing and long-term care facilities. Our partnership with MedElite Healthcare Management Group empowers us to focus on what matters most: providing compassionate, personalized care that meets the unique needs of each resident. Together, we champion continuous innovation and collaboration in our shared mission to redefine senior care across the country. Position Overview Infinite Medical P.C. is seeking an on-site, detail-oriented Licensed Nurse (RN) or Licensed Practical Nurse (LPN) to serve as a Nursing Care Coordinator. Operating strategically in an administrative role, you will review and verify chart documentation to ensure compliance and support seamless continuity of care for our patient population. Key Responsibilities Compliance & Records Review : Evaluate patient records and Review Visit Logs (RVLs) to ensure clinical accuracy and strict adherence to CMS and internal operational guidelines. Quality Assurance : Identify documentation discrepancies, generate clinical corrections, and submit suggestions for resolution. Cross-Functional Communication : Coordinate with HR, Operations, and Clinical teams to resolve inquiries and escalate technical issues promptly. Professional Development : Participate in mandatory operational and educational meetings, complete post-training surveys, and cross-train in expanding care management verticals. Systems Utilization : Maintain proficiency across primary digital platforms, including Emsow, PointClickCare, Sigma/Matrix, Reliable/Visual, Yardi-One and Google Workspace. Core Knowledge & Competencies Clinical Documentation & Chart Review : Review charts for completeness, accuracy, regulatory compliance, and QA standards. Care Management : Expert understanding of chronic disease management, care planning, care transitions, and patient engagement. LTC & SNF Operations : Familiarity with Skilled Nursing Facility workflows, common geriatric diagnoses, and interdisciplinary care. EMR Systems : Hands-on experience with PointClickCare (PCC), MatrixCare, SigmaCare, or similar healthcare platforms. Medical Literacy : Strong grasp of medical terminology, pharmacology, diagnoses, medications, and treatments. Execution & Communication : Exceptional attention to detail to find discrepancies, strict time management to meet daily productivity goals, and professional communication skills. Preferred Knowledge CMS guidelines for chronic care documentation. ICD-10 diagnosis coding fundamentals. Review Visit Log (RVL) completion and clinical review principles. Microsoft Office and Google Workspace proficiency. Position Requirements Licensure : Valid Registered Nurse (RN) or Licensed Practical Nurse (LPN) Clinical Expertise : Strong foundational knowledge of geriatric care and chronic medical conditions. Schedule : Commitment to a full-time, on-site, standardized schedule: Monday through Friday, 9:00 AM – 5:30 PM. Computer work including keyboard and mouse use for extended periods. Occasional standing/walking. Lifting/moving patients. Prolonged sitting. Compensation & Benefits Compensation : $30.00 – $35.00 per hour Sign-on Bonus : $1,000 Financial Security : 401(k) retirement plan Health & Wellness : Comprehensive Medical, Dental, and Vision insurance Life Insurance : Company-sponsored policy coverage Time Off : Accrued Paid Time Off (PTO) Why Join Infinite Medical P.C.? Purpose-Driven Work : Drive meaningful healthcare outcomes and elevate the quality of life for seniors. Collaborative Culture : Thrive in a cohesive, mission-driven team environment. Work-Life Balance : Enjoy a stable daytime schedule that respects your personal time. Equal Opportunity Employer Infinite Medical P.C. is an Equal Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment built on mutual respect, free from discrimination based on race, religion, color, national origin, gender, sexual orientation, age, disability, or veteran status. Note: This job description outlines the general nature and scope of the role; essential functions may evolve to meet changing business demands. Ready to Make a Difference? Apply today to join our team and deliver compassionate, compliant, and personalized care where it matters most. #INDL

Location: Lanham, MD Position Objective: Provides information for diagnosis, treatment, and prevention of disease by preparing tissue samples for microscopic examination by a pathologist. Essential Job Duties: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Creates a work environment that positively promotes process improvement. Explores opportunities to add value to job (innovative ideas) to benefit the organization and taking ownership of the outcome. Proactively finds other work-related tasks during low census. Maintains safe and clean working environment by complying with procedures, rules, and regulations. Follows appropriate protocol for the handling and disposing of histological chemical stains and reagents. Maintains inter- and intradepartmental work flow by fostering a spirit of cooperation (hand offs). Maintains laboratory supplies inventory by checking stock to determine inventory level; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies. Conserves laboratory resources by using equipment and supplies as needed to accomplish job results. Provides histology information by answering questions and requests. Documents technical information appropriately in the LIS. Performs accessioning, embedding, sectioning, special stains, immunohistochemistry, and frozen sections, with appropriate supervision, if required, and within productivity guidelines with minimal errors. Performs grossing and dissection of small surgical biopsies (if qualified under CLIA regulations). Operates and maintains laboratory instrumentation. Performs preventative maintenance and troubleshoots problems to the full extent of ability. Actively participate in the laboratory quality plan/program (ex. investigative reports, notification of delays, etc.). Performs quality controls and documents QC for each lab procedure on a daily basis and follows up on issues (troubleshoots). Participates in external proficiency testing and in continuing education classes to maintain licensure and remain updated on changes in the histology field. Participate in the training of new staff and students by serving as a mentor and technical resource. Educational/Experience Requirements: Required Minimum Education: Bachelor’s Degree from an accredited college or university with course work sufficient to meet the requirements of the American Society of Clinical Pathology (ASCP) for certification as a Histotechnologist. Required Minimum Experience : One year of experience working in an acute care facility as a Histotechnologist or Histotechnician, preferred. Required License/Certifications: HTL(ASCP); preferred. Knowledge, Skills, Abilities: Ability to work cooperatively with all types of personalities both inside and outside the organization. Working Conditions, Equipment, Physical Demands: Physical Demands – Medium Duty The physical demands and work environment that have been described are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with the Americans with Disabilities Act. There is a reasonable expectation that employees in this position will be exposed to blood-borne pathogens. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements. Updated 2/27/24 Pay Range $24 — $50 USD Luminis Health Benefits Overview: •    Medical, Dental, and Vision Insurance •    Retirement Plan (with employer match for employees who work more than 1000 hours in a calendar year) •    Paid Time Off •    Tuition Assistance Benefits •    Employee Referral Bonus Program •    Paid Holidays, Disability, and Life/AD&D for full-time employees •    Wellness Programs •    Employee Assistance Programs and more *Benefit offerings based on employment status Opt-in for text notifications! Luminis Health's two-way SMS texting platform lets you receive notifications and messages from our Talent Acquisition team directly on your phone. To enable this feature, select "yes" when asked to "opt-in to receive text messages" and to "Receive updates from a recruiter about this job via SMS" when completing your application. Once you are opted in, you can easily opt-out at any time. Standard text messaging rates may apply based on the candidate's mobile carrier plan. Luminis Health is not responsible for any charges incurred by the recipient. Candidates are encouraged to review their mobile carrier's plan for applicable text messaging rates and usage charges.

Location: Dammam, Saudi Arabia; Al Khobar, Saudi Arabia; Al Jubail, Saudi Arabia We are seeking experienced professionals across Engineering, Safety, Cost, Scheduling, Environmental, Construction, and IT/Business Systems disciplines. Candidates should have 5–10+ years of relevant experience in design, execution, coordination, analysis, and support within industrial, infrastructure, or project-based environments. Key Responsibilities (role-dependent): Design, review, and support engineering systems (Instrumentation, Civil, Mechanical, Piping, Environmental). Ensure compliance with safety, environmental, and regulatory standards. Support construction planning, execution, and site coordination. Develop and manage project cost estimates, schedules, and progress reports. Provide business systems analysis and IT support for operational continuity. Collaborate with multidisciplinary teams to deliver projects on time and within budget. Requirements: Bachelor’s degree in relevant discipline. Proven experience ranging from 5+ to 10+ years , depending on role. Strong technical, analytical, and communication skills. Experience in industrial, EPC, oil & gas, infrastructure, or large-scale projects preferred.

Location: West Union, IA Position Summary : This role will be responsible for maintaining and improving production across various products and equipment at our West Union manufacturing facility. Why Work for CaptiveAire? Nation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment. Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible price Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the environment, particularly in a world where remote work is common. I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. What I truly admire about CaptiveAire is the company’s unwavering commitment to innovation and continuous improvement… Equally impressive is the culture of open communication that exists throughout the organization. From my own experience, upper management never takes the stance that a task is “not their job.” Instead, there’s a shared understanding that every role is essential to the company’s success. This mindset, combined with the transparent communication across departments and facilities, creates a collaborative environment that truly sets CaptiveAire apart. We want to stay on the cutting edge and so are constantly sourcing and utilizing the best equipment available. Any position can provide feedback that is listened to and incorporated into processes. Collaboration is key at CaptiveAire and so there is no being “Silo-ed” into one area. CaptiveAire is fast-moving and no-nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: No two days are ever the same in this role. Tasks can include: Training operators in proper process, tool usage, and tool maintenance. Collaborating with other engineering teams on process efficiency, quality, and safety improvement projects. Developing new designs using 3D modeling software like Solidworks for carts or production tools. Then work with the fab shops to complete the fabrication of them in a timely manner. Work closely with contractors to coordinate utility needs such as air and electrical drops, and oversee the installation of new equipment. Coordinate daily, weekly, and monthly preventative maintenance tasks on machinery. Troubleshoot machines whenever the team needs extra support. Provide hands-on support to production lines as needed. Complete hands-on testing for new process changes From a Plant Process Engineer: I enjoy the constant problem solving and the drive toward innovation that keeps things exciting. I have had jobs in the past where the day could not end soon enough because I was ready to be done. This is not one of them. I find the job rewarding and find myself here past scheduled hours often not because I have to but because I want to. Primary Job Responsibilities: 95% of the workday will be on the manufacturing floor working on projects, operating and repair of equipment Involvement with equipment operators to ensure parts are programmed, training and any process related issues Responsible for working with Safety, Quality, and Industrial engineering teams on parts, assembly, and process improvements Implementation of Engineer Change Notices (ECN) and Process Change Instructions (PCI) Support production as needed, capable of building all products to the expected quality standards in the designated area of focus on an as needed basis Assist production staff with product related questions Work with Plant manager on various facility improvement projects Job Requirements: 0-10 yrs experience 4-year technical degree, in an electrical, electronics or mechanically oriented curriculum Must be strong in mechanical and electrical engineering. I nternship/co-op experience is preferred Must enjoy hands on product exposure Electrical skills and experience needed AutoCAD or similar software a must Multi-tasking, problem solving and strong communication skills a must Strong emphasis on perfect product quality and to maintain a safe work environment Physical Requirements: Ability to work standing for 8 - 10 hours at a time Required to use ladder, forklift or other means to acquire parts for product assembly Able to use power & hand tools, as well as electrical testing and measuring equipment Ability to lift 35 to 50 pounds independently Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $65k-$85k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. This position is classified as a safety-sensitive position.  Employees in this position are subject to drug and alcohol testing in accordance with CaptiveAire’s Drug-Free Workplace policy. #P1

Location: West Union, IA Position Summary : This role will be working within the manufacturing facility and will be responsible for maintaining total quality and training for multiple product lines. Why Work for CaptiveAire? Nation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment. Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible price Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the environment, particularly in a world where remote work is common. I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. One of the things I appreciate most about CaptiveAire is how strongly it embodies the entrepreneurial spirit. I’m empowered with the autonomy to manage my work independently, while also benefiting from the robust support and resources of a large, well-established company. We want to stay on the cutting edge and so are constantly sourcing and utilizing the best equipment available. Any position can provide feedback that is listened to and incorporated into processes. Collaboration is key at CaptiveAire and so there is no being “Silo-ed” into one area. CaptiveAire is fast-moving and no-nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: Reviewing internal and external quality data for assigned product groups. External quality data is then used to drive product/process improvements to further aid the reliability of our equipment. Internal quality data is used to give direction on where to spend time for improving production efficiency and product quality. Working collaboratively with plant engineers and line technicians to improve production processes to have quality built into the product and increase output. Majority of the day will be spent on the production floor, auditing processes and products, implementing quality assurance/quality control processes, and supporting the assigned product groups. From a Quality Engineer: No two days are the same. Some days will be full of firefighting on the production floor, where others may be deep-diving on quality issues over the past 6 months to identify heavy hitters which need significant corrective action. Job diversity keeps the role exciting. Primary Job Responsibilities: Work with Quality Manager to develop and implement quality assurance and quality control procedures 95% of the work day spent on the manufacturing floor implementing quality solutions, while working on major projects. Accept total responsibility for product quality, including procured and in-house parts, assembly process, functional testing, and packaging of finished product. Maintain a continuous improvement mentality with focus on Kaizen (small change for the better) Perform quality audits, quality admin inspections, and support staff with any quality related questions Organize and present audit findings in a measurable manner to obtain deliverables and initiate corrective actions. Review manufacturing and quality instructions, methods, and processes to identify and improve product build quality. Work with Quality Manager to manage QMS for third party audit organizations. Report directly to the Quality Manager for your facility Job Requirements: 0-10 yrs experience 4-year technical degree, in an electrical, electronics or mechanically oriented curriculum Internship/co-op experience is preferred Must enjoy hands on product exposure Electrical skills and experience needed AutoCAD or similar software a must Multi-tasking, problem solving and strong communication skills a must Strong emphasis on perfect product quality and to maintain a safe work environment Physical Requirements: Ability to work standing for extended periods of time Required to use ladder, forklift or other means to acquire parts for product assembly Able to use power & hand tools, as well as electrical testing and measuring equipment Ability to lift 35 to 50 pounds independently Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $65k-$90k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. This position is classified as a safety-sensitive position.  Employees in this position are subject to drug and alcohol testing in accordance with CaptiveAire’s Drug-Free Workplace policy. #P1 #LI-TL1

Location: Redding, CA Position Summary : This role will be working within the manufacturing facility and will be responsible for maintaining total quality and training for multiple product lines. Why Work for CaptiveAire? Nation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment. Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible price Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the environment, particularly in a world where remote work is common. I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. One of the things I appreciate most about CaptiveAire is how strongly it embodies the entrepreneurial spirit. I’m empowered with the autonomy to manage my work independently, while also benefiting from the robust support and resources of a large, well-established company. We want to stay on the cutting edge and so are constantly sourcing and utilizing the best equipment available. Any position can provide feedback that is listened to and incorporated into processes. Collaboration is key at CaptiveAire and so there is no being “Silo-ed” into one area. CaptiveAire is fast-moving and no-nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: Reviewing internal and external quality data for assigned product groups. External quality data is then used to drive product/process improvements to further aid the reliability of our equipment. Internal quality data is used to give direction on where to spend time for improving production efficiency and product quality. Working collaboratively with plant engineers and line technicians to improve production processes to have quality built into the product and increase output. Majority of the day will be spent on the production floor, auditing processes and products, implementing quality assurance/quality control processes, and supporting the assigned product groups. From a Quality Engineer: No two days are the same. Some days will be full of firefighting on the production floor, where others may be deep-diving on quality issues over the past 6 months to identify heavy hitters which need significant corrective action. Job diversity keeps the role exciting. Primary Job Responsibilities: Work with Quality Manager to develop and implement quality assurance and quality control procedures 95% of the work day spent on the manufacturing floor implementing quality solutions, while working on major projects. Accept total responsibility for product quality, including procured and in-house parts, assembly process, functional testing, and packaging of finished product. Maintain a continuous improvement mentality with focus on Kaizen (small change for the better) Perform quality audits, quality admin inspections, and support staff with any quality related questions Organize and present audit findings in a measurable manner to obtain deliverables and initiate corrective actions. Review manufacturing and quality instructions, methods, and processes to identify and improve product build quality. Work with Quality Manager to manage QMS for third party audit organizations. Report directly to the Quality Manager for your facility Job Requirements: 0-10 yrs experience 4-year technical degree, in an electrical, electronics or mechanically oriented curriculum Internship/co-op experience is preferred Must enjoy hands on product exposure Electrical skills and experience needed AutoCAD or similar software a must Multi-tasking, problem solving and strong communication skills a must Strong emphasis on perfect product quality and to maintain a safe work environment Physical Requirements: Ability to work standing for extended periods of time Required to use ladder, forklift or other means to acquire parts for product assembly Able to use power & hand tools, as well as electrical testing and measuring equipment Ability to lift 35 to 50 pounds independently Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $65k-$90k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. This position is classified as a safety-sensitive position.  Employees in this position are subject to drug and alcohol testing in accordance with CaptiveAire’s Drug-Free Workplace policy.