Вакансии

Location: Montreal, Canada 📍 Location: Montreal, Quebec, Canada 📄 Employment Type: Full-Time 🏢 Work Arrangement: TBD 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Important Screening Requirements Must be eligible to work in Canada and capable of obtaining the required security clearance. Bachelor’s or Master’s degree in Electrical Engineering, Systems Engineering, Aerospace Engineering, or a related field. 15+ years of experience in satellite systems design, particularly for Low Earth Orbit (LEO) missions. Experience supporting the full satellite systems lifecycle, from design through verification, launch, and operations. Strong background in electrical system architecture, payload-bus integration, and subsystem interfaces. Experience with requirements management, system verification and validation, and technical documentation. Proficiency in MATLAB and familiarity with Agile methodologies. Senior Electrical Satellite Systems Engineer- JD.pdf About the Role We are seeking a Senior Electrical Satellite Systems Engineer to lead electrical systems engineering activities for satellite programs, with a focus on Low Earth Orbit (LEO) missions. The successful candidate will define electrical system architecture, oversee subsystem interfaces, manage requirements and technical documentation, and lead verification and validation activities throughout the satellite lifecycle. This role also involves technical leadership, stakeholder coordination, subcontractor oversight, and support for launch and early operations. Senior Electrical Satellite Systems Engineer- JD.pdf What We’re Looking For We’re looking for a senior-level satellite systems engineer with deep electrical systems expertise, strong end-to-end lifecycle experience, and the ability to lead complex technical activities across design, integration, verification, and operations. The ideal candidate combines systems-level thinking with practical engineering judgment, clear communication, and effective technical leadership. Senior Electrical Satellite Systems Engineer- JD.pdf Key Responsibilities System Design & Architecture Define electrical system architecture supporting payload and satellite bus integration. Manage system requirements, traceability, and technical documentation, including Concept of Operations (CONOPS). Oversee interfaces among satellite subsystems, including avionics, electrical power, and Attitude and Orbit Control Systems (AOCS). Coordinate system-level design activities to ensure compatibility across subsystems. Analysis & Reliability Conduct electrical power budgets and system-level analyses. Perform failure mode and reliability analyses. Develop and support Fault Detection, Isolation, and Recovery (FDIR) strategies. Identify system risks and support technical trade-off decisions. Verification & Validation Lead system verification and validation (V&V) activities. Develop verification strategies, test plans, and supporting documentation. Support ground testing, including Thermal Vacuum (TVAC) and Electromagnetic Compatibility/Interference (EMC/EMI) testing. Ensure verification activities address system requirements and interface performance. Testing & Operations Develop system-level test plans and procedures. Support launch preparation, Launch and Early Orbit Phase (LEOP), and Satellite Operations Control Centre (SOCC) activities. Assist with troubleshooting and resolving system-level issues during testing and operations. Senior Electrical Satellite Systems Engineer- JD.pdf Technical Leadership & Stakeholder Coordination Mentor engineers and provide technical guidance to engineering teams. Coordinate with stakeholders, subcontractors, and cross-functional engineering groups. Lead and participate in design reviews, including: System Requirements Review (SRR) Preliminary Design Review (PDR) Critical Design Review (CDR) Apply relevant engineering standards and practices, including ECSS and PUS-STD. Project & Process Management Oversee subcontractor activities and technical deliverables. Track technical issues, risks, and project progress. Support Agile engineering practices and continuous improvement initiatives. Senior Electrical Satellite Systems Engineer- JD.pdf Required Qualifications Bachelor’s or Master’s degree in Electrical Engineering, Systems Engineering, Aerospace Engineering, or a related discipline. 15+ years of satellite systems design experience, particularly involving LEO missions. Experience across the full satellite systems lifecycle. Strong understanding of electrical system architecture and payload-bus integration. Experience with avionics, electrical power, AOCS, and related subsystem interfaces. Experience with requirements management, traceability, and system documentation. Background in power budgeting, failure mode analysis, reliability engineering, and FDIR. Experience leading system-level verification and validation. Knowledge of ground testing, including TVAC and EMC/EMI. Experience supporting launch, LEOP, and satellite operations activities. Proficiency in MATLAB and familiarity with Agile methodologies. Strong communication, leadership, analytical, and problem-solving skills. Must be eligible to work in Canada and able to obtain the necessary security clearance. Senior Electrical Satellite Systems Engineer- JD.pdf Preferred Qualifications Experience with ECSS standards and PUS-STD. Experience leading satellite design reviews and coordinating technical stakeholders. Experience overseeing subcontractors and managing technical deliverables. Experience mentoring engineers and leading multidisciplinary engineering teams.

Требования: — MTech graduates with a focus on VLSI projects preferred. Задачи: — null Условия: — null

Location: Hybrid About Us At Cloudflare, we are on a mission to help build a better Internet. Today the company runs one of the world’s largest networks that powers millions of websites and other Internet properties for customers ranging from individual bloggers to SMBs to Fortune 500 companies. Cloudflare protects and accelerates any Internet application online without adding hardware, installing software, or changing a line of code. Internet properties powered by Cloudflare all have web traffic routed through its intelligent global network, which gets smarter with every request. As a result, they see significant improvement in performance and a decrease in spam and other attacks. Cloudflare was named to Entrepreneur Magazine’s Top Company Cultures list and ranked among the World’s Most Innovative Companies by Fast Company. At Cloudflare, we’re not looking for people who wait for a polished roadmap; we’re looking for the builders who see the cracks in the Internet that everyone else has simply learned to live with. We value candidates who have the instinct to spot a "normalized" problem and the AI-native curiosity to create a solution using the latest tools. Our culture is built on iteration, leveraging AI to ship faster today to make it better tomorrow, while ensuring that every improvement, no matter how small, is shared across the team to lift everyone up. If you’re the type of person who values curiosity over bureaucracy, and that AI is a partner in solving tough problems to keep the Internet moving forward, you’ll fit right in. Hiring Locations: Austin, US, San Francisco, CA, Seattle, WA, Washington DC, US About the Department The Infrastructure Engineering team builds and scales Cloudflare’s global network, ensuring high availability, security, and performance across hundreds of cities worldwide. Within Infrastructure Operations, the Hardware Integration group acts as the bridge between engineering designs and physical deployment, overseeing key third-party manufacturing partnerships, hardware quality, and supply chain logistics to keep our expanding footprint running seamlessly. Role Summary As a Rack Integration Operations Engineer , you will serve as a technical quality gatekeeper and operational partner across Cloudflare's hardware build programs. Working collaboratively within the Infrastructure Engineering and Strategy teams, you will bridge the gap between engineering specifications and external contract manufacturing partners. In this role, you will ensure Bill of Materials (BOM) accuracy, optimize materials planning, track partner performance, and actively modernise internal operations by building light, AI-enabled automations to streamline repetitive workflows. Key Responsibilities Engineering & Quality Review Ensure BOM Accuracy: Review and validate complex BOMs prior to release to integration partners, proactively identifying part substitutions, spec mismatches, and potential build blockers. Bridge Engineering & Production: Partner closely with hardware design engineers to resolve design change requests (DCRs) and BOM discrepancies throughout the build lifecycle. Maintain Technical Quality Standards: Leverage functional expertise across rack-level power, networking, server, and firmware architectures to evaluate build compliance against Cloudflare specifications. Materials & Logistics Operations Support Materials Planning: Contribute to demand forecasting and materials planning for rack build programs, aligning partner capacity with component lead times. Coordinate Supply Chain Logistics: Oversee inbound and outbound logistics for components and finished racks between partners and Cloudflare sites through to final shipment. Partner & Program Management Drive Partner Execution: Serve as an operational point of contact for external hardware integration partners regarding build progress, scheduling, and issue resolution. Track SLAs & Quality Metrics: Contribute to vendor scorecards and KPI tracking across build quality, on-time delivery, and cost efficiency; lead root-cause analyses for recurring defects. Maintain Program Visibility: Track hardware build cycles in Jira, leading documentation, status check-ins, and project closeouts alongside cross-functional teammates. AI Innovation & Process Automation Automate Operational Workflows: Identify manual, repetitive tasks across BOM reviews, reporting, and partner tracking, using AI tools and LLM prompt engineering to streamline processes. Analyze Performance Data: Evaluate spend, build timelines, and quality trends using AI-assisted analysis tools to surface actionable operational insights. Build Shared Tooling: Develop, document, and maintain sustainable, lightweight automation scripts and workflows for adoption across the broader team. Qualifications Requirements Vendor & Manufacturing Experience: Professional background managing hardware vendor or contract manufacturing (EMS/ODM) relationships, including BOM validation, quality tracking, and schedule management. Hardware & BOM Proficiency: Practical ability to evaluate rack-level technical specifications (power distribution, networking, server hardware, firmware) to ensure manufacturing compliance. Program Management Discipline: Hands-on experience managing operational workflows in Jira, with a track record of tracking and reporting on team KPIs and SLAs. Applied AI & Automation Skills: Practical experience using AI tools or LLMs to automate concrete workflows, optimize reporting, or perform data analysis. Cross-Functional Collaboration: Strong written and verbal communication skills, with a track record of working effectively across engineering, procurement, supply chain, and external partner teams. Desirable / Bonus Qualifications Background in data center infrastructure hardware (servers, network switches, rPDUs, enterprise cabling). Experience writing lightweight scripts (Python, Google Apps Script, or similar) paired with AI developer tools. Familiarity with global hardware supply chain and logistics operations. Experience with Oracle ERP Cloud (e.g., SCM, Procurement, Inventory Management) or comparable ERP platforms such as SAP or NetSuite, particularly for BOM management, purchase orders, and materials tracking. Compensation Compensation may be adjusted depending on work location. For Bay Area based hires: Estimated annual salary of $110,000 - $151,000 For New York, Washington DC, Seattle based hires: Estimated annual salary of $104,000 - $143,000 For Austin Texas based hires: Estimated annual salary of $116,000 - $128,000 What Makes Cloudflare Special? We’re not just a highly ambitious, large-scale technology company. We’re a highly ambitious, large-scale technology company with a soul. Fundamental to our mission to help build a better Internet is protecting the free and open Internet. Project Galileo : Since 2014, we've equipped more than 2,400 journalism and civil society organizations in 111 countries with powerful tools to defend themselves against attacks that would otherwise censor their work, technology already used by Cloudflare’s enterprise customers--at no cost. Athenian Project : In 2017, we created the Athenian Project to ensure that state and local governments have the highest level of protection and reliability for free, so that their constituents have access to election information and voter registration. Since the project, we've provided services to more than 425 local government election websites in 33 states. 1.1.1.1 : We released 1.1.1.1 to help fix the foundation of the Internet by building a faster, more secure and privacy-centric public DNS resolver. This is available publicly for everyone to use - it is the first consumer-focused service Cloudflare has ever released. Here’s the deal - we don’t store client IP addresses never, ever. We will continue to abide by our privacy commitment and ensure that no user data is sold to advertisers or used to target consumers. Sound like something you’d like to be a part of? We’d love to hear from you! Please note that applicants who progress to the offer stage of the interview process may be asked to attend an in-person interview within one of the Cloudflare Offices or Cloudflare Hubs.  More details about this will be available at that stage of the interview process. This position may require access to information protected under U.S. export control laws, including the U.S. Export Administration Regulations. Please note that any offer of employment may be conditioned on your authorization to receive software or technology controlled under these U.S. export laws without sponsorship for an export license. Cloudflare is proud to be an equal opportunity employer.  We are committed to providing equal employment opportunity for all people and place great value in both diversity and inclusiveness.  All qualified applicants will be considered for employment without regard to their, or any other person's, perceived or actual race, color, religion, sex, gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship, age, physical or mental disability, medical condition, family care status, or any other basis protected by law. We are an AA/Veterans/Disabled Employer. Cloudflare provides reasonable accommodations to qualified individuals with disabilities.  Please tell us if you require a reasonable accommodation to apply for a job. Examples of reasonable accommodations include, but are not limited to, changing the application process, providing documents in an alternate format, using a sign language interpreter, or using specialized equipment.  If you require a reasonable accommodation to apply for a job, please contact us via e-mail at hr@cloudflare.com or via mail at 101 Townsend St. San Francisco, CA 94107.

Requirements: — Bachelor's or Masters/Phd in Electrical Engineering, Computer Engineering, Computer Science, or a related field with 3+ years of experience.

Задачи: — проверять конфигурации GPU-серверов на соответствие спецификациям; — работать непосредственно с NVIDIA GPU и серверным железом; — проводить hardware diagnostics, testing & commissioning; — проверять BIOS / BMC / IPMI / PCIe / power / cooling; — искать hardware errors и конфигурационные несоответствия; — самостоятельно разбираться с проблемами оборудования на площадке; — фиксировать результаты тестирования, серийные номера, фото и отчётность. Требования: — Hands-on опыт с GPU servers и NVIDIA GPUs; — хорошее понимание серверного оборудования; — опыт установки, диагностики и commissioning; — базовые знания Linux; — умение самостоятельно troubleshooting hardware; — хороший технический английский; — русский native; — готовность к частым командировкам. Условия: — международные командировки; — частые поездки на площадки поставщиков по всему миру; — все командировочные расходы оплачивает компания; — локация вне РФ; — старт ASAP.

Location: Arizona - Remote; Arkansas - Remote; Florida - Remote; Georgia - Remote; Iowa - Remote; Kansas - Remote; Missouri - Remote; Nebraska - Remote; Oklahoma - Remote; Texas - Remote Company Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We’re a people-centric firm, so it’s no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description We are seeking an Associate Electrical Engineer to join our Federal Engineering and Design Team. In this role, you will support the planning and design of electrical systems for federal facilities and infrastructure projects. Working alongside experienced engineers and designers, you will gain exposure to federal design standards, including UFC, DoD, and VA requirements, while developing technical expertise in power distribution, lighting, communications, and other building electrical systems. This position provides hands-on experience designing mission-critical facilities and offers the opportunity to contribute to projects that support national interests while building a strong foundation for your engineering career. Key Responsibilities Assist in the design of electrical systems for federal facilities, including power distribution, lighting, grounding, communications, and life safety systems. Perform engineering calculations, system layouts, and equipment selections under the guidance of licensed engineers. Develop and apply knowledge of electrical engineering principles, codes, standards, and industry best practices. Utilize engineering and design software such as Revit, AutoCAD, or other electrical modeling and analysis tools. Assist with project schedules, design coordination efforts, and interdisciplinary collaboration with mechanical, civil, structural, and architectural teams. Research applicable federal design criteria and recommend solutions to technical challenges. Gain experience creating and maintaining project information within the firm's project management systems. May travel to project sites and federal installations to support design development, construction, and project coordination activities. Why Join Us? Contributes to projects that support national defense, public service, and critical federal infrastructure. Enjoy flexible work arrangements, including remote work options. Grow your technical expertise through mentorship, professional development opportunities, and exposure to complex federal projects. Be part of a collaborative and innovative environment that values teamwork, learning, and career growth. Qualifications You Are Passionate About: Solving complex engineering challenges. Working collaboratively in a multidisciplinary environment. Building technical expertise and continuous learning. Using your talents to positively impact communities and federal clients. Preferred Qualifications: Bachelor’s degree in electrical engineering with a concentration in Power. Minimum of one year of engineering experience, internship experience, or equivalent academic project experience. Engineer-In-Training (EIT) certification or ability to obtain within a reasonable timeframe. Basic understanding of electrical engineering principles related to building and facility systems. Working knowledge of, or ability to become proficient in, design and modeling software such as Revit, AutoCAD, SKM, AGi32, or similar tools. Familiarity with the National Electrical Code (NEC) and electrical building systems is preferred. Strong verbal and written communication skills. Ability to contribute effectively within a collaborative team environment. Excellent analytical, problem-solving, and decision-making skills. Willingness to travel and perform occasional field work as required. At Olsson, your expertise helps deliver innovative solutions for projects that matter. If you're passionate about electrical engineering, eager to grow your technical skills, and excited to contribute to impactful federal projects, we'd love to hear from you. #LI-DNP Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: Receive a competitive 401(k) match Be empowered to build your career with tailored development paths Have the possibility for flexible work arrangements Engage in work that has a positive impact on communities Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants’ personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the “CCPA”), this notice explains Olsson’s practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here .

Location: Arizona - Remote; Arkansas - Remote; Iowa - Remote; Missouri - Remote; Nebraska - Remote; Oklahoma - Remote; Texas - Remote Company Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We’re a people-centric firm, so it’s no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description We are seeking an Associate Electrical Engineer to join our Federal Engineering and Design Team. In this role, you will support the planning and design of electrical systems for federal facilities and infrastructure projects. Working alongside experienced engineers and designers, you will gain exposure to federal design standards, including UFC, DoD, and VA requirements, while developing technical expertise in power distribution, lighting, communications, and other building electrical systems. This position provides hands-on experience designing mission-critical facilities and offers the opportunity to contribute to projects that support national interests while building a strong foundation for your engineering career. Key Responsibilities Assist in the design of electrical systems for federal facilities, including power distribution, lighting, grounding, communications, and life safety systems. Perform engineering calculations, system layouts, and equipment selections under the guidance of licensed engineers. Develop and apply knowledge of electrical engineering principles, codes, standards, and industry best practices. Utilize engineering and design software such as Revit, AutoCAD, or other electrical modeling and analysis tools. Assist with project schedules, design coordination efforts, and interdisciplinary collaboration with mechanical, civil, structural, and architectural teams. Research applicable federal design criteria and recommend solutions to technical challenges. Gain experience creating and maintaining project information within the firm's project management systems. May travel to project sites and federal installations to support design development, construction, and project coordination activities. Why Join Us? Contributes to projects that support national defense, public service, and critical federal infrastructure. Enjoy flexible work arrangements, including remote work options. Grow your technical expertise through mentorship, professional development opportunities, and exposure to complex federal projects. Be part of a collaborative and innovative environment that values teamwork, learning, and career growth. Qualifications You Are Passionate About: Solving complex engineering challenges. Working collaboratively in a multidisciplinary environment. Building technical expertise and continuous learning. Using your talents to positively impact communities and federal clients. Preferred Qualifications: Bachelor’s degree in electrical engineering with a concentration in Power. Minimum of one year of engineering experience, internship experience, or equivalent academic project experience. Engineer-In-Training (EIT) certification or ability to obtain within a reasonable timeframe. Basic understanding of electrical engineering principles related to building and facility systems. Working knowledge of, or ability to become proficient in, design and modeling software such as Revit, AutoCAD, SKM, AGi32, or similar tools. Familiarity with the National Electrical Code (NEC) and electrical building systems is preferred. Strong verbal and written communication skills. Ability to contribute effectively within a collaborative team environment. Excellent analytical, problem-solving, and decision-making skills. Willingness to travel and perform occasional field work as required. At Olsson, your expertise helps deliver innovative solutions for projects that matter. If you're passionate about electrical engineering, eager to grow your technical skills, and excited to contribute to impactful federal projects, we'd love to hear from you. #LI-DNP Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: Receive a competitive 401(k) match Be empowered to build your career with tailored development paths Have the possibility for flexible work arrangements Engage in work that has a positive impact on communities Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants’ personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the “CCPA”), this notice explains Olsson’s practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here .

Требования: — В настоящее время имеет или находится в процессе получения степени бакалавра в области электротехники, компьютерной инженерии или смежных инженерных областях.

Location: Boston, MA Workplace: OnSite At WHOOP, we're on a mission to unlock and inspire performance for life. WHOOP empowers members to perform at a higher level through a deeper understanding of their bodies and daily lives. WHOOP is hiring an Electrical Engineer II to help advance the performance, reliability, and scalability of WHOOP wearable technology and supporting hardware. As a member of the Hardware Engineering team, you will play a hands-on role in designing, testing, characterizing, debugging, and improving electrical systems throughout the product lifecycle, from early development and prototyping through high-volume production and continuous improvement. You will work closely with Electrical, Mechanical, Firmware, Manufacturing, Quality, and Supply Chain teams to investigate complex technical challenges, develop and validate robust solutions, and drive improvements in product performance, quality, reliability, and manufacturability. RESPONSIBILITIES: - Design, test, characterize, debug, and optimize low-power, mixed-signal electronic circuits and systems across new product development and continuous improvement initiatives - Contribute to schematic design, component selection, PCB development, hardware prototyping, board bring-up, and design iteration to improve system performance, robustness, and manufacturability - Develop and execute electrical experiments, characterization plans, and validation testing to understand system behavior, investigate failures, identify root causes, and guide engineering decisions - Analyze test data and troubleshoot electrical issues to drive improvements in circuit performance, power consumption, signal integrity, reliability, production yield, and cost - Collaborate across Electrical, Mechanical, Firmware, Manufacturing, Quality, and Supply Chain teams, as well as with suppliers and contract manufacturers, to resolve technical challenges and implement robust hardware solutions - Support hardware through design verification, validation, new product introduction (NPI), and ongoing production, including engineering change orders (ECOs) and design improvements; travel up to 15% domestically and internationally to collaborate with partners and suppliers QUALIFICATIONS: - Bachelor's degree in Electrical Engineering or a related technical field, or equivalent practical experience - 3+ years of relevant electrical engineering experience designing, developing, testing, debugging, or supporting electronic hardware - Strong understanding of electrical engineering fundamentals, including analog and digital circuit design, power management, signal integrity, component fundamentals, and common communication interfaces - Hands-on experience designing, prototyping, testing, characterizing, and debugging electrical circuits and systems using standard laboratory equipment - Experience reading and developing schematics and working with ECAD tools such as Altium or equivalent - Experience with hardware development, validation, or production support, including exposure to design verification, failure analysis, design iteration, or manufacturing processes - Strong analytical and problem-solving skills, with the ability to use data, experimentation, and cross-functional collaboration to investigate complex technical problems and drive effective solutions - Strong commitment to embracing and leveraging AI tools in day-to-day tasks, ensuring AI-assisted work aligns with the same high-quality standards as personal contributions. This role is based in the WHOOP office located in Boston, MA. The successful candidate must be prepared to relocate if necessary to work out of the Boston, MA office.   Interested in the role, but don’t meet every qualification? We encourage you to still apply! At WHOOP, we believe there is much more to a candidate than what is written on paper, and we value character as much as experience. As we continue to build a diverse and inclusive environment, we encourage anyone who is interested in this role to apply.   WHOOP is an Equal Opportunity Employer and participates in E-verify https://www.e-verify.gov/ to determine employment eligibility. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.   The WHOOP compensation philosophy is designed to attract, motivate, and retain exceptional talent by offering competitive base salaries, meaningful equity, and consistent pay practices that reflect our mission and core values.   At WHOOP, we view total compensation as the combination of base salary, equity, and benefits, with equity serving as a key differentiator that aligns our employees with the long-term success of the company and allows every member of our corporate team to own part of WHOOP and share in the company’s long-term growth and success.   The U.S. base salary range for this full-time position is $110,000 - $150,000. Salary ranges are determined by role, level, and location. Within each range, individual pay is based on factors such as job-related skills, experience, performance, and relevant education or training.   In addition to the base salary, the successful candidate will also receive benefits and a generous equity package.   These ranges may be modified in the future to reflect evolving market conditions and organizational needs. While most offers will typically fall toward the starting point of the range, total compensation will depend on the candidate’s specific qualifications, expertise, and alignment with the role’s requirements.

Location: Sainte-Anne-de-Bellevue, Canada 📍 Location: Sainte-Anne-de-Bellevue, QC, Canada 📄 Employment Type: Full-Time 🏢 Work Arrangement: Remote available for U.S. and Canadian Citizens 🚀 Start Date: TBD 💰 Compensation: TBD — based on skills and experience Remote & Relocation Opportunities U.S. and Canadian Citizens: Remote work arrangement available. UK and European Candidates: Relocation assistance/allowance and a relocation bonus are available for qualified candidates willing to relocate to Canada. Candidates should be prepared to support collaboration across multidisciplinary spacecraft engineering teams. Important Screening Requirements Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Physics, or a related field . 8+ years of Electrical Power System (EPS) design experience on LEO/MEO satellite platforms. Deep knowledge of spacecraft bus subsystems and their interactions . Experience with power electronics design and power management hardware . Strong understanding of aerospace systems engineering fundamentals. Hands-on experience supporting systems integration, testing, and troubleshooting . Experience with Confluence and JIRA . Ability to work effectively with limited supervision. Strong analytical and problem-solving skills. Excellent written and oral communication skills in English. French is an asset. About the Role We are seeking an experienced Satellite Electrical Power System (EPS) Design Engineer to support the concept, detailed design, analysis, verification, and integration of electrical power subsystems for current and next-generation remote sensing and communications satellites . The role focuses on the design and development of solar arrays, power-conditioning units, batteries, power distribution, and regulation systems , while working closely with multidisciplinary teams across payload, spacecraft bus, thermal, structural, avionics, and mission systems. The successful candidate will contribute to the development of reliable, high-performance EPS solutions throughout the spacecraft lifecycle, from early architecture and trade studies through integration, launch, and on-orbit operations. What We’re Looking For We’re looking for a senior spacecraft electrical power systems engineer with strong experience designing and integrating EPS architectures for satellite platforms. The ideal candidate can work across the full EPS lifecycle, from power architecture and trade studies through detailed design, modeling, verification, spacecraft integration, launch, and on-orbit support . Strong candidates will combine deep power electronics and spacecraft EPS expertise with hands-on systems integration, analytical problem-solving, and the ability to work effectively across multidisciplinary engineering teams. Key Responsibilities Architecture & Requirements Define EPS architectures covering power generation, energy storage, and distribution while meeting mission power, mass, volume, and reliability requirements. Perform architecture and technology trade studies involving: Solar cell technologies Battery chemistries Regulator topologies Develop system requirements and functional flow block diagrams. Develop and maintain Interface Control Documents (ICDs) and design descriptions. Manage requirements and maintain bidirectional traceability throughout the program lifecycle. Detailed Design & Analysis Size and evaluate: Solar arrays Power-conditioning units Battery packs Power distribution units Build and validate high-fidelity electrical models for spacecraft operating modes. Perform FMECA and fault-detection analysis . Develop and maintain power budget models. Perform load-flow and thermal-power coupling analyses. Conduct survivability analyses for: Eclipse operations Safe mode Fault-tolerant operation Analyze EPS performance across different spacecraft mission phases and operating conditions. Cross-Functional Coordination Present technical status, risk analyses, and trade-study results to senior management. Interface with spacecraft bus teams across: Power Thermal Structures Avionics Develop and maintain high-fidelity power models for mission analysis, including: Orbit raising Station keeping De-orbit Develop tools supporting power efficiency and optimization. Support Phase 0 and pre-Phase A activities. Collaborate with multidisciplinary engineering teams throughout the spacecraft lifecycle. Integration & Verification Author Verification Plans, Test Matrices, and Validation Procedures for unit and EPS subsystem testing. Support ground-test and integration campaigns. Support: Fueling activities Thermal-vacuum testing EMI/EMC testing Spacecraft-level integration Analyze test data and support anomaly resolution. Close out anomalies and update design baselines. Support flight software integration. Technical Leadership & Mentorship Mentor and guide junior and intermediate systems engineers and interns. Lead or support multidisciplinary engineering activities. Serve as a technical liaison with customers, partners, and external vendors. Contribute to continuous improvement initiatives. Contribute to engineering knowledge bases, processes, and standards development. Configuration, Documentation & Standards Maintain EPS design and safety standards. Ensure engineering analyses, software, documentation, and deliverables are properly version controlled within the PLM environment. Support spacecraft design reviews, including: SRR PDR CDR MRR/TRR Support technology road-mapping and innovation activities. Launch, On-Orbit & Operations Support Support launch-site interface checklists with the responsible launch vehicle interface engineer. Support pre-launch checkout procedures. Support early-orbit checkout scripts. Provide real-time EPS engineering support during: Launch On-orbit commissioning Anomaly investigations Contingency operations Support Satellite Operations Handbook (SOOH) development and associated operator training. Required Qualifications Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Physics, or a related field . 8+ years of EPS system design experience on LEO/MEO satellite platforms. Deep knowledge of spacecraft bus subsystems and their interactions. Experience with power electronics design and power management hardware. Strong understanding of aerospace systems engineering fundamentals. Hands-on experience supporting systems integration and testing . Strong troubleshooting and problem-solving capabilities. Experience with Confluence and JIRA . Ability to work efficiently with limited supervision. Ability to break down complex technical problems and develop practical solutions. Excellent written and oral communication skills in English. Preferred Qualifications Experience designing EPS architectures for remote sensing or communications satellites . Experience with solar array, battery, power-conditioning, and power-distribution systems. Experience with high-fidelity spacecraft power modeling . Experience with FMECA, fault detection, survivability analysis, and reliability engineering. Experience supporting thermal-vacuum, EMI/EMC, and spacecraft-level integration testing . Experience with mission-phase power analysis, including orbit raising, station keeping, eclipse, safe mode, and de-orbit. Experience developing tools for power efficiency and optimization. Experience supporting spacecraft launch-site and on-orbit operations . Experience with spacecraft design reviews and lifecycle processes. French language skills are an asset.

Location: Boston, MA Workplace: OnSite At WHOOP, we're on a mission to unlock and inspire performance for life. WHOOP empowers members to perform at a higher level through a deeper understanding of their bodies and daily lives. WHOOP is seeking a Rework Technician II to support the development, testing, and refinement of innovative wearable technology. In this hands-on role, you will partner closely with mechanical, electrical, and firmware engineers to build prototypes, perform electrical and mechanical rework, conduct testing and failure analysis, and help maintain highly organized engineering lab environments. The ideal candidate brings strong technical aptitude across both electrical and mechanical disciplines, exceptional attention to detail, and the ability to execute high-quality work in a fast-paced product development environment. RESPONSIBILITIES: - Perform electrical rework, soldering, troubleshooting, and analysis of PCBAs and other electronic components, including fine-pitch and small-form-factor components - Build and assemble prototypes, cable assemblies, test fixtures, and small-scale manufacturing assemblies in partnership with electrical and mechanical engineering teams - Conduct electrical and mechanical product testing, dimensional measurements, and inspections using tools such as microscopes, vision measurement systems, and calipers - Support failure analysis of engineering prototypes and consumer returns, documenting findings and communicating results to engineering partners - Maintain and organize electrical, mechanical, and automated test labs, including managing parts inventory, equipment, 3D printers, and lab supplies - Support engineering development activities including firmware updates, prototype modifications, test circuit board builds, and other hands-on technical work as needed QUALIFICATIONS: - 3+ years of relevant technician, electronics rework, prototyping, manufacturing, engineering lab, or related hands-on experience - Demonstrated experience with PCBA rework and soldering, including working with fine-pitch components; experience with BGA and 0201 or smaller components is a plus - Hands-on mechanical aptitude with experience in areas such as prototype assembly, product testing, cable or wire harness assembly, adhesives, fixtures, or 3D printing - Experience using measurement, inspection, and troubleshooting equipment such as microscopes, calipers, vision measurement systems, multimeters, or similar tools - Strong organizational skills, attention to detail, and ability to manage equipment, components, documentation, and multiple priorities in a fast-paced environment - Associate degree in an engineering, science, or technical field, or equivalent combination of education and relevant hands-on experience - Interest in consumer electronics, wearable technology, health, fitness, or performance products - Strong commitment to embracing and leveraging AI tools in day-to-day tasks, ensuring AI-assisted work aligns with the same high-quality standards as personal contributions. This role is based in the WHOOP office located in Boston, MA. The successful candidate must be prepared to relocate if necessary to work out of the Boston, MA office. Interested in the role, but don’t meet every qualification? We encourage you to still apply! At WHOOP, we believe there is much more to a candidate than what is written on paper, and we value character as much as experience. As we continue to build a diverse and inclusive environment, we encourage anyone who is interested in this role to apply. WHOOP is an Equal Opportunity Employer and participates in E-verify https://www.e-verify.gov/ to determine employment eligibilityThe WHOOP compensation philosophy is designed to attract, motivate, and retain exceptional talent by offering competitive base salaries, meaningful equity, and consistent pay practices that reflect our mission and core values. At WHOOP, we view total compensation as the combination of base salary, equity, and benefits, with equity serving as a key differentiator that aligns our employees with the long-term success of the company and allows every member of our corporate team to own part of WHOOP and share in the company’s long-term growth and success. The U.S. base salary range for this full-time position is $110,000 - $150,000. Salary ranges are determined by role, level, and location. Within each range, individual pay is based on factors such as job-related skills, experience, performance, and relevant education or training. In addition to the base salary, the successful candidate will also receive benefits and a generous equity package. These ranges may be modified in the future to reflect evolving market conditions and organizational needs. While most offers will typically fall toward the starting point of the range, total compensation will depend on the candidate’s specific qualifications, expertise, and alignment with the role’s requirements.

Location: Singapore About Nebius: Nebius is leading a new era in cloud infrastructure for the global AI economy. We are building a full-stack AI cloud platform that supports developers and enterprises from data and model training through to production deployment, without the cost and complexity of building large in-house AI/ML infrastructure. Built by engineers, for engineers. From large-scale GPU orchestration to inference optimization, we own the hard problems across compute, storage, networking and applied AI. Listed on Nasdaq (NBIS) and headquartered in Amsterdam, we have a global footprint with R&D hubs across Europe, the UK, North America and Israel. Our team of 1,500+ includes hundreds of engineers with deep expertise across hardware, software and AI R&D. As an Electrical Design Engineer specialising in high- and medium-voltage systems, you will help design the resilient power infrastructure behind Nebius AI data centers across EMEA. You will work from early concept and site development through detailed design, construction, commissioning and operational handover. This is a hands-on technical role for an engineer who can make sound design decisions, challenge consultant proposals and turn demanding GPU workload requirements into safe, scalable and buildable electrical systems. What you will own Develop and review electrical designs for new data center builds, expansions and major infrastructure upgrades across EMEA. Own HV and MV design inputs from utility point of connection through substations, transformers, switchgear and downstream distribution. Produce and review design criteria, single-line diagrams, load schedules, equipment specifications, protection philosophies and basis-of-design documentation. Evaluate power capacity, redundancy and distribution strategies for high-density AI environments, including N, N+1 and 2N configurations. Review technical submissions from design consultants, colocation partners, contractors and equipment vendors, identifying gaps, risks and practical alternatives. Coordinate electrical design with mechanical, controls, network, hardware, civil and architectural workstreams so the complete solution is buildable, maintainable and scalable. Support equipment strategy and selection for transformers, MV and LV switchgear, UPS systems, generators, busway and associated protection and control systems. Lead or review power-system studies, including load flow, short-circuit, protection coordination, arc-flash, earthing, harmonics and power-quality assessments. Ensure design compliance with applicable IEC and EN standards, local grid requirements, national regulations and Nebius engineering standards. Support procurement, factory acceptance testing, site acceptance testing, construction queries, commissioning and final handover to operations. Capture lessons learned and contribute to repeatable reference designs, specifications and technical playbooks for rapid EMEA deployment. What success looks like Electrical design risks are identified and resolved before they affect cost, programme or energisation. HV and MV systems meet capacity, resilience, safety and maintainability requirements from day one. Consultants and suppliers receive clear decisions, standards and technical direction. Designs progress efficiently from concept to construction and through commissioning without loss of design intent. What you will bring A degree in Electrical Engineering, Power Systems Engineering or a related discipline, or equivalent professional experience. Typically 5 or more years of electrical design experience in data centers, mission-critical facilities, utilities or large industrial environments. Strong practical knowledge of HV and MV distribution, substations, transformers, switchgear, protection systems, earthing and utility interconnection. Experience producing or reviewing construction-ready electrical design documentation and technical specifications. A solid understanding of UPS systems, generators, LV distribution and the interaction between facility power systems and high-density IT loads. Working knowledge of relevant IEC and EN standards and the ability to interpret local codes and grid requirements across different EMEA markets. Experience with power-system analysis software such as ETAP, DIgSILENT PowerFactory, SKM or equivalent. Strong technical judgement, attention to detail and the ability to explain complex trade-offs clearly to technical and non-technical stakeholders. Fluent professional English and willingness to travel across EMEA. It would be an advantage if you have Experience with hyperscale, neocloud, GPU-dense or liquid-cooled data center environments. Experience with EPMS, BMS or SCADA integration and electrical commissioning. Knowledge of long-lead electrical equipment strategy and vendor qualification. Chartered Engineer status or an equivalent professional engineering certification. Experience with BIM, Revit or model-based multidisciplinary design coordination. Benefits & Perks: Competitive compensation Career growth and learning opportunities Flexibility and ownership Collaborative and innovative culture Opportunity to work on impactful AI projects International environment and talented teams What's it like to work at Nebius: Fast moving - Bold thinking - Constant growth - Meaningful impact - Trust and real ownership - Opportunity to shape the future of AI Equal Opportunity Statement: Nebius is an equal opportunity employer. We are committed to fostering an inclusive and diverse workplace and to providing equal employment opportunities in all aspects of employment. We do not discriminate on the basis of race, color, religion, sex (including pregnancy), national origin, ancestry, age, disability, genetic information, marital status, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by applicable law. Applicants must be authorized to work in the country in which they apply and will be required to provide proof of employment eligibility as a condition of hire. If you need accommodations during the application process, please let us know.

Location: Amsterdam, Netherlands About Nebius: Nebius is leading a new era in cloud infrastructure for the global AI economy. We are building a full-stack AI cloud platform that supports developers and enterprises from data and model training through to production deployment, without the cost and complexity of building large in-house AI/ML infrastructure. Built by engineers, for engineers. From large-scale GPU orchestration to inference optimization, we own the hard problems across compute, storage, networking and applied AI. Listed on Nasdaq (NBIS) and headquartered in Amsterdam, we have a global footprint with R&D hubs across Europe, the UK, North America and Israel. Our team of 1,500+ includes hundreds of engineers with deep expertise across hardware, software and AI R&D. As an Electrical Design Engineer specialising in high- and medium-voltage systems, you will help design the resilient power infrastructure behind Nebius AI data centers across EMEA. You will work from early concept and site development through detailed design, construction, commissioning and operational handover. This is a hands-on technical role for an engineer who can make sound design decisions, challenge consultant proposals and turn demanding GPU workload requirements into safe, scalable and buildable electrical systems. What you will own Develop and review electrical designs for new data center builds, expansions and major infrastructure upgrades across EMEA. Own HV and MV design inputs from utility point of connection through substations, transformers, switchgear and downstream distribution. Produce and review design criteria, single-line diagrams, load schedules, equipment specifications, protection philosophies and basis-of-design documentation. Evaluate power capacity, redundancy and distribution strategies for high-density AI environments, including N, N+1 and 2N configurations. Review technical submissions from design consultants, colocation partners, contractors and equipment vendors, identifying gaps, risks and practical alternatives. Coordinate electrical design with mechanical, controls, network, hardware, civil and architectural workstreams so the complete solution is buildable, maintainable and scalable. Support equipment strategy and selection for transformers, MV and LV switchgear, UPS systems, generators, busway and associated protection and control systems. Lead or review power-system studies, including load flow, short-circuit, protection coordination, arc-flash, earthing, harmonics and power-quality assessments. Ensure design compliance with applicable IEC and EN standards, local grid requirements, national regulations and Nebius engineering standards. Support procurement, factory acceptance testing, site acceptance testing, construction queries, commissioning and final handover to operations. Capture lessons learned and contribute to repeatable reference designs, specifications and technical playbooks for rapid EMEA deployment. What success looks like Electrical design risks are identified and resolved before they affect cost, programme or energisation. HV and MV systems meet capacity, resilience, safety and maintainability requirements from day one. Consultants and suppliers receive clear decisions, standards and technical direction. Designs progress efficiently from concept to construction and through commissioning without loss of design intent. What you will bring A degree in Electrical Engineering, Power Systems Engineering or a related discipline, or equivalent professional experience. Typically 5 or more years of electrical design experience in data centers, mission-critical facilities, utilities or large industrial environments. Strong practical knowledge of HV and MV distribution, substations, transformers, switchgear, protection systems, earthing and utility interconnection. Experience producing or reviewing construction-ready electrical design documentation and technical specifications. A solid understanding of UPS systems, generators, LV distribution and the interaction between facility power systems and high-density IT loads. Working knowledge of relevant IEC and EN standards and the ability to interpret local codes and grid requirements across different EMEA markets. Experience with power-system analysis software such as ETAP, DIgSILENT PowerFactory, SKM or equivalent. Strong technical judgement, attention to detail and the ability to explain complex trade-offs clearly to technical and non-technical stakeholders. Fluent professional English and willingness to travel across EMEA. It would be an advantage if you have Experience with hyperscale, neocloud, GPU-dense or liquid-cooled data center environments. Experience with EPMS, BMS or SCADA integration and electrical commissioning. Knowledge of long-lead electrical equipment strategy and vendor qualification. Chartered Engineer status or an equivalent professional engineering certification. Experience with BIM, Revit or model-based multidisciplinary design coordination. Benefits & Perks: Competitive compensation Career growth and learning opportunities Flexibility and ownership Collaborative and innovative culture Opportunity to work on impactful AI projects International environment and talented teams What's it like to work at Nebius: Fast moving - Bold thinking - Constant growth - Meaningful impact - Trust and real ownership - Opportunity to shape the future of AI Equal Opportunity Statement: Nebius is an equal opportunity employer. We are committed to fostering an inclusive and diverse workplace and to providing equal employment opportunities in all aspects of employment. We do not discriminate on the basis of race, color, religion, sex (including pregnancy), national origin, ancestry, age, disability, genetic information, marital status, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by applicable law. Applicants must be authorized to work in the country in which they apply and will be required to provide proof of employment eligibility as a condition of hire. If you need accommodations during the application process, please let us know.

Требования: — Наличие или получение степени бакалавра в области электротехники, компьютерной инженерии или смежной инженерной области.

Требования: — Степень бакалавра в области электротехники, электронной технологии, электротехнической технологии, электротехники и компьютерной инженерии или в смежной области.

Location: Arizona - Remote; Arkansas - Remote; Georgia - Remote; Idaho - Remote; Illinois - Remote; Kansas - Remote; Louisiana - Remote; Missouri - Remote; Oklahoma - Remote Company Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We’re a people-centric firm, so it’s no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Associate Electrical Engineer-Federal Engineering & Design Job Description We are seeking an Associate Electrical Engineer to join our Federal Engineering and Design Team. In this role, you will support the planning and design of electrical systems for federal facilities and infrastructure projects. Working alongside experienced engineers and designers, you will gain exposure to federal design standards, including UFC, DoD, and VA requirements, while developing technical expertise in power distribution, lighting, communications, fire alarm, and other building electrical systems. This position provides hands-on experience designing mission-critical facilities and offers the opportunity to contribute to projects that support national interests while building a strong foundation for your engineering career. Key Responsibilities Assist in the design of electrical systems for federal facilities, including power distribution, lighting, grounding, communications, and life safety systems. Perform engineering calculations, system layouts, and equipment selections under the guidance of licensed engineers. Develop and apply knowledge of electrical engineering principles, codes, standards, and industry best practices. Utilize engineering and design software such as Revit, AutoCAD, or other electrical modeling and analysis tools. Assist with project schedules, design coordination efforts, and interdisciplinary collaboration with mechanical, civil, structural, and architectural teams. Research applicable federal design criteria and recommend solutions to technical challenges. Gain experience creating and maintaining project information within the firm's project management systems. May travel to project sites and federal installations to support design development, construction, and project coordination activities. Why Join Us? Contributes to projects that support national defense, public service, and critical federal infrastructure. Enjoy flexible work arrangements, including remote work options. Grow your technical expertise through mentorship, professional development opportunities, and exposure to complex federal projects. Be part of a collaborative and innovative environment that values teamwork, learning, and career growth. Qualifications You Are Passionate About: Solving complex engineering challenges. Working collaboratively in a multidisciplinary environment. Building technical expertise and continuous learning. Using your talents to positively impact communities and federal clients. Preferred Qualifications: Bachelor’s degree in electrical engineering with a concentration in power. Minimum of one year of engineering experience, internship experience, or equivalent academic project experience. Engineer-In-Training (EIT) certification or ability to obtain within a reasonable timeframe. Basic understanding of electrical engineering principles related to building and facility systems. Working knowledge of, or ability to become proficient in, design and modeling software such as Revit, AutoCAD, SKM, AGi32, or similar tools. Familiarity with the National Electrical Code (NEC) and electrical building systems is preferred. Strong verbal and written communication skills. Ability to contribute effectively within a collaborative team environment. Excellent analytical, problem-solving, and decision-making skills. Willingness to travel and perform occasional field work as required. Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: Receive a competitive 401(k) match Be empowered to build your career with tailored development paths Have the possibility for flexible work arrangements Engage in work that has a positive impact on communities Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants’ personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the “CCPA”), this notice explains Olsson’s practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here .

Location: Arizona - Remote; Arkansas - Remote; Idaho - Remote; Missouri - Remote; Nebraska - Remote; North Kansas City, MO; Oklahoma - Remote; Omaha, NE; Texas - Remote Company Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We’re a people-centric firm, so it’s no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description We are seeking an Associate Electrical Engineer to join our Federal Engineering and Design Team. In this role, you will support the planning and design of electrical systems for federal facilities and infrastructure projects. Working alongside experienced engineers and designers, you will gain exposure to federal design standards, including UFC, DoD, and VA requirements, while developing technical expertise in power distribution, lighting, communications, fire alarm, and other building electrical systems. This position provides hands-on experience designing mission-critical facilities and offers the opportunity to contribute to projects that support national interests while building a strong foundation for your engineering career. Key Responsibilities Assist in the design of electrical systems for federal facilities, including power distribution, lighting, grounding, communications, and life safety systems. Perform engineering calculations, system layouts, and equipment selections under the guidance of licensed engineers. Develop and apply knowledge of electrical engineering principles, codes, standards, and industry best practices. Utilize engineering and design software such as Revit, AutoCAD, or other electrical modeling and analysis tools. Assist with project schedules, design coordination efforts, and interdisciplinary collaboration with mechanical, civil, structural, and architectural teams. Research applicable federal design criteria and recommend solutions to technical challenges. Gain experience creating and maintaining project information within the firm's project management systems. May travel to project sites and federal installations to support design development, construction, and project coordination activities. Why Join Us? Contributes to projects that support national defense, public service, and critical federal infrastructure. Enjoy flexible work arrangements, including remote work options. Grow your technical expertise through mentorship, professional development opportunities, and exposure to complex federal projects. Be part of a collaborative and innovative environment that values teamwork, learning, and career growth. Qualifications You Are Passionate About: Solving complex engineering challenges. Working collaboratively in a multidisciplinary environment. Building technical expertise and continuous learning. Using your talents to positively impact communities and federal clients. Preferred Qualifications: Bachelor’s degree in electrical engineering with a concentration in power. Minimum of one year of engineering experience, internship experience, or equivalent academic project experience. Engineer-In-Training (EIT) certification or ability to obtain within a reasonable timeframe. Basic understanding of electrical engineering principles related to building and facility systems. Working knowledge of, or ability to become proficient in, design and modeling software such as Revit, AutoCAD, SKM, AGi32, or similar tools. Familiarity with the National Electrical Code (NEC) and electrical building systems is preferred. Strong verbal and written communication skills. Ability to contribute effectively within a collaborative team environment. Excellent analytical, problem-solving, and decision-making skills. Willingness to travel and perform occasional field work as required. At Olsson, your expertise helps deliver innovative solutions for projects that matter. If you're passionate about electrical engineering, eager to grow your technical skills, and excited to contribute to impactful federal projects, we'd love to hear from you. #LI-HO1 Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: Receive a competitive 401(k) match Be empowered to build your career with tailored development paths Have the possibility for flexible work arrangements Engage in work that has a positive impact on communities Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants’ personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the “CCPA”), this notice explains Olsson’s practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here .

Требования: — Bachelor's or Master's degree in ECE, EEE, or related fields is must.