Вакансии

Location: Austin, TX About Us Infinitum is revolutionizing the future of motors with our patented Aircore technology — delivering superior performance in half the weight and size, while reducing the carbon footprint compared to traditional motors. Our solutions open up sustainable design possibilities for smaller, lighter, and quieter machines, improving quality of life while conserving energy and reducing waste. Headquartered in Austin, Texas, we are driven by innovation and a commitment to making a positive global impact. Learn more at goinfinitum.com Position: Senior Global Logistics Manager Location: North Austin, TX (Onsite) Reports To: Vice President of Supply Chain Travel: Approximately 20-30%, domestic and international Position Summary The Senior Global Logistics Manager designs, builds, and operates Infinitum's global inbound transportation network, including supplier shipments from Asia, Europe, Mexico, and the United States and motor shipments from Ramos Arizpe/Saltillo to Fan Systems Contract Manufacturers in the United States. This is a hands-on leadership role. The manager will initially participate directly in logistics execution while building the lanes, carrier network, routing guide, systems, controls, and team capabilities required to scale. The role leads the Logistics Coordinator and progressively transitions routine transactions while remaining involved in critical, complex, expedited, and high-risk shipments. Key Responsibilities - Develop and execute Infinitum's global inbound logistics strategy, including lanes, modes, carriers, transit times, service levels, capacity, and contingencies. - Design and optimize supplier-to-manufacturing flows across Asia, Europe, and North America using consolidation, mode conversion, milk runs, and other network improvements. - Lead selection, negotiation, and performance management of freight forwarders, carriers, and 3PLs across ocean, air, FTL, LTL, parcel, drayage, and expedited modes. - Conduct transportation RFQs and negotiate freight contracts, rate cards, service levels, capacity commitments, and commercial terms; leverage total freight spend to improve cost and service. - Develop and govern Infinitum's Global Routing Guide covering approved carriers, routing instructions, modes, transit expectations, consolidation, exceptions, and escalations. - Own and initially participate in transportation execution from supplier pickup through delivery while establishing standard work for the Logistics Coordinator. - Lead and develop the Logistics Coordinator responsible for pickup scheduling, carrier/supplier coordination, shipment tracking, delivery confirmation, status reporting, and records. - Own transportation of motors from Ramos Arizpe/Saltillo to Fan Systems Contract Manufacturers, including lanes, service levels, visibility, carrier performance, and exceptions. - Own inbound freight-cost performance and savings plans; analyze spend by carrier, mode, and lane to identify routing, consolidation, and utilization opportunities. - Establish premium-freight governance; track spend by root cause and drive corrective actions to reduce recurring expedites. - Establish and own a global inbound logistics control tower, dashboards, escalation thresholds, and operating cadence for proactive, exception-based shipment management. - Partner with Import/Export while maintaining clear ownership: Logistics owns transportation execution; Import/Export owns customs compliance, brokers, classification, valuation, origin, IMMEX/Annex 24, permits, licenses, and regulatory requirements. - Manage freight claims, damage, loss, carrier liability, and contingency plans for critical lanes and service disruptions. - Partner with Sourcing and Purchasing on landed cost, Incoterms, logistics capability, and transportation risk. - Standardize logistics procedures, carrier scorecards, QBRs, and continuous-improvement practices that reduce lead time, cost, variability, manual work, and premium freight. Qualifications & Experience Required - 10+ years of progressive experience in global logistics, international transportation, inbound logistics, freight management, or related manufacturing supply chain roles. - Demonstrated experience managing global inbound freight, including Asia-to-North America transportation and US-Mexico cross-border flows. - Strong experience with ocean, air, truckload, LTL, parcel, drayage, and expedited transportation. - Proven experience conducting transportation RFQs, negotiating freight contracts, and managing carriers, forwarders, and 3PLs. - Experience developing transportation lanes, routing guides, carrier strategies, shipment visibility, logistics KPIs, and exception-management routines. - Strong knowledge of transportation economics, consolidation, utilization, transit-time management, Incoterms, and total landed cost. - Strong analytical and financial acumen; advanced Excel and experience with ERP, TMS, or shipment-visibility systems. NetSuite experience is a plus. - Hands-on leadership and process-building experience; strong communication, negotiation, escalation, and team-development skills; ability to travel 20-30%. Preferred - Experience supporting high-growth manufacturing and global supply chains in electronics, motors, HVAC, industrial equipment, automotive, or electromechanical products. - Experience designing logistics networks, origin consolidation, milk runs, or transportation optimization models across North America and Asia. - Experience implementing or managing a TMS, logistics control tower, or shipment-visibility platform. - Exposure to international trade and customs processes and a clear understanding of the Logistics / Import-Export interface. - Lean, Six Sigma, APICS, CSCMP, or logistics certification is a plus; bilingual English/Spanish is a plus. Competencies That Win in This Role - Operational leadership: combines hands-on execution, disciplined process building, and team development. - Logistics engineering and commercial acumen: designs effective networks and understands carrier economics, rates, contracts, and leverage. - Data-driven management: uses cost, service, transit-time, and exception data to improve performance. - Execution discipline and risk awareness: maintains visibility, escalates early, and resolves issues before they affect production or customers. - Cross-functional influence: drives alignment across suppliers, carriers, Supply Chain, Manufacturing, Import/Export, Finance, and Contract Manufacturing. Key Performance Indicators - Inbound transportation on-time pickup and on-time delivery. - Transit time versus standard and shipment milestone accuracy. - Freight spend versus budget and freight savings versus annual target. - Premium freight spend, root-cause reduction, and Global Routing Guide compliance. - Carrier / forwarder performance, freight claims, and invoice-rate accuracy. - Cross-border motor shipment performance, utilization improvement, and process scalability. Why Join Infinitum - Be part of a sustainability-driven company transforming the motor industry. - Build and shape Infinitum's global inbound logistics function. - High-visibility role impacting material availability, manufacturing performance, freight cost, and customer delivery. - Combine hands-on execution with the opportunity to design transportation networks, routing standards, carrier strategies, and systems. - Comprehensive Health Coverage (Medical/Dental/Vision) - Short-Term & Long-Term Disability Coverage - Health Savings Account (HSA) - includes employer contributions. - Flexible Spending Account (FSA) & Limited Purpose Flexible Spending Account - 401(k) - Traditional and Roth - Open Paid Time Off (PTO) - 12 Paid Holidays - Community give-back opportunities. Infinitum embraces diversity and is an equal opportunity employer. Agency representatives, we appreciate your interest, but we've got this!

Location: Phoenix,AZ Position Summary: The Field Engineer will serve as engineering support for our sales team assisting with construction management and after-sales field support. This role will require frequent travel to job sites throughout a specific territory but will be based at our sales office in Phoenix. The position will include both field and office work. Position will involve extensive formalized training plus work under a mentor, developing skills and gaining an understanding of CaptiveAire products, troubleshooting, and application engineering processes etc. Why Work for CaptiveAire? Nation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible price Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: I can confidently say that I've never been part of a more focused company, working as one big team to achieve amazing success. There is never a day you don’t learn something new at CaptiveAire. I am able to learn something new due to the freedom to take on new tasks independently and problem solve. I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the environment, particularly in a world where remote work is common. I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. One of the things I appreciate most about CaptiveAire is how strongly it embodies the entrepreneurial spirit. I’m empowered with the autonomy to manage my work independently, while also benefiting from the robust support and resources of a large, well-established company. CaptiveAire is fast-moving and no-nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: This position will encompass a wide variety of tasks where one day does not look exactly like the next. The projects our team handles are high in volume and unique from one another, spanning throughout the whole course of design, procurement, coordination, and post-sale support. Typical tasks include: Estimated 50% to 75% of time spent in the field on job sites Supporting installations and equipment start ups to ensure high quality outcomes and adherence to engineering principles Handling complex troubleshooting issues Customer service and coordination with all parties – CaptiveAire team, contractors, engineers, installers, CaptiveAire Service Primary Job Responsibilities: A combination of being in the field working on job sites and data analysis and remote troubleshooting using building management system (travel required) Product Support - Troubleshoot issues with existing and newly installed equipment in the field and provide immediate solutions Maintain expert level knowledge of all CaptiveAire products Work closely with engineering team, service team, local sales team and customers to help find best outcomes on installed jobs On site for construction trade coordination meetings and startups to ensure a good outcome Review and analyze data gathered from installed equipment in order to make product improvements, utilizing our CASLink remote monitoring system Use mechanical building design knowledge to review applications for customers and suggest improvements in operation Perform 3 rd party training for outside contractors on CaptiveAire products Provide reports to Regional Manager as well as other teams on customer feedback/challenges, quality, product improvements/issues Required skills: 0-5 yrs experience 4 year technical degree in a mechanical, electrical, construction or science-oriented curriculum preferred Hands on, technical internship/co-op experience is preferred Must enjoy hands on product exposure HVAC and/or electrical experience strongly preferred Multi-tasking, problem solving and strong communication skills a must If not already completed, expectation of FE Exam completion in area of study for engineering graduates within 6 months of employment with CaptiveAire MUST BE A “GO GETTER”! Must be able to travel for training Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $70k-$100k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. #P1

Location: United States About Nebius: Nebius is leading a new era in cloud infrastructure for the global AI economy. We are building a full-stack AI cloud platform that supports developers and enterprises from data and model training through to production deployment, without the cost and complexity of building large in-house AI/ML infrastructure. Built by engineers, for engineers. From large-scale GPU orchestration to inference optimization, we own the hard problems across compute, storage, networking and applied AI. Listed on Nasdaq (NBIS) and headquartered in Amsterdam, we have a global footprint with R&D hubs across Europe, the UK, North America and Israel. Our team of 1,500+ includes hundreds of engineers with deep expertise across hardware, software and AI R&D. The role As a Mechanical Design Engineer, you'll provide technical expertise for data center mechanical infrastructure, including cooling systems, HVAC, and critical equipment. You'll assess designs, capacity, reliability, and operational readiness to ensure data centers meet performance and scalability requirements. This is a build-phase role for someone who can independently evaluate complex systems while helping establish engineering standards and best practices for future deployments. Travel: This position will require on-site presence at data centers. Your responsibilities will include: Lead mechanical engineering evaluations for data center opportunities. Assess cooling infrastructure, HVAC systems, and critical mechanical equipment. Evaluate air-cooled, liquid-cooled, and hybrid cooling solutions for AI and hyperscale environments. Provide mechanical feasibility recommendations and Go/No-Go project input. Conduct technical due diligence on existing and new data center facilities. Review cooling capacity, chiller plants, CRAH/CRAC systems, and liquid cooling readiness. Evaluate equipment availability, vendor capabilities, lead times, and deployment risks. Support cooling topology, mechanical design strategy, and equipment selection decisions. Validate mechanical design assumptions, capacity requirements, and construction readiness Partner with engineering teams, vendors, and consultants to ensure scalable, reliable data center solutions. We expect you to have: Experience supporting hyperscale data center or AI infrastructure development. Experience with BMS controls integration and mechanical systems commissioning. Professional Engineer (PE) license or similar professional certification. Experience evaluating colocation or build-to-suit mechanical infrastructure in a due diligence capacity. You're comfortable operating in ambiguity and building technical evaluation processes where none exist. You know how to independently assess complex mechanical infrastructure while helping define how future projects should be evaluated. 8+ years of experience in data center mechanical engineering, MEP design, or mission-critical mechanical systems. Experience with cooling topology design, liquid cooling systems, chiller plants, and CRAH/CRAC systems for high-density AI/hyperscale environments. Strong understanding of mechanical capacity planning, equipment selection, and capex trade-offs in data center design. Experience evaluating mechanical feasibility of sites or facilities prior to commercial commitment. Excellent communication and executive presentation skills. Bachelor's degree in Mechanical Engineering or a related discipline, or equivalent experience. It will be an added bonus if you have: Experience supporting hyperscale data center or AI infrastructure development. Experience with BMS controls integration and mechanical systems commissioning. Professional Engineer (PE) license or similar professional certification. Experience evaluating colocation or build-to-suit mechanical infrastructure in a due diligence capacity. Key employee benefits: Health insurance: 100% company-paid medical, dental, and vision coverage for employees and families. 401(k) plan: up to 4% company match with immediate vesting. Parental leave: 20 weeks paid for primary caregivers, 12 weeks for secondary caregivers. Remote work reimbursement: up to $85/month for mobile and internet. Disability & life insurance: company-paid short-term, long-term and life insurance coverage. Compensation We offer competitive salaries ranging from $115K to $225K OTE, which includes base salary and bonus. Join Nebius Today! Pay Transparency We offer competitive compensation and benefits packages. Actual compensation will be determined based on job-related factors, including experience, skills, qualifications, the level at which the candidate is hired, and geographic location, consistent with applicable law. Base Compensation Range $115,000 — $225,000 USD Benefits & Perks: Competitive compensation Career growth and learning opportunities Flexibility and ownership Collaborative and innovative culture Opportunity to work on impactful AI projects International environment and talented teams What's it like to work at Nebius: Fast moving - Bold thinking - Constant growth - Meaningful impact - Trust and real ownership - Opportunity to shape the future of AI Equal Opportunity Statement: Nebius is an equal opportunity employer. We are committed to fostering an inclusive and diverse workplace and to providing equal employment opportunities in all aspects of employment. We do not discriminate on the basis of race, color, religion, sex (including pregnancy), national origin, ancestry, age, disability, genetic information, marital status, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by applicable law. Applicants must be authorized to work in the country in which they apply and will be required to provide proof of employment eligibility as a condition of hire. If you need accommodations during the application process, please let us know.

Location: Mississauga, ON Position Summary: The Sales engineering internship will focus on a variety of sales and customer related engineering tasks in a fast-paced environment. The ideal candidate is currently in a mechanical-or construction-oriented curriculum with expected graduation date of December 2026 or May 2027 and has an interest in being a Sales Engineer.  The role will be part time in the fall. NOTE: Excellent performance may lead to full-time employment opportunities in sales, field service or other engineering roles upon graduation. Why Work for CaptiveAire? Nation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment.  Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible price Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos What our Interns have to say: During my time as an intern at CaptiveAire, I was able to grow my communication and technical skills and gain practical experience that complemented my time as an Engineering student. I built confidence in presentations, communication with peers, AutoCAD, and other program skills. I was also introduced to the HVAC and Construction field while simultaneously developing sales skills and strategies. CaptiveAire is an excellent company that fosters employee growth by offering a wealth of valuable resources to enhance knowledge and skills, enabling employees to achieve success at their own pace and with the support of leadership. The internship equipped me with similar responsibilities to those I now hold in my full-time Technical Sales position, which significantly boosted my confidence and laid the foundation for my current career. My internship showed me how to personally own a project, and just how rewarding it is to see the project you did the calculations for, that you designed from start to finish, be up and operational in the field. This internship was a truly unique experience, as from the first day you have a real impact on the customers you serve. Your success is directly tied to the success of a project, so you are constantly driven to learn and to deliver the best work possible. You work with such a wide variety of projects and products that every day you’re learning something new. If you’re an engineering student with a drive for helping and working with others in a fast-paced environment, I would strongly recommend an internship with CaptiveAire. Job Description: Responsibilities include, but are not limited to: Engineering/inside sales tasks – parts orders, accounting, selections, designs Outside sales tasks – market research, cold calling Special projects assigned by sales team related to office efficiencies, data analysis or market research/development. Field Engineering –job site visits and exposure to field service tasks Qualifications: WE ARE LOOKING FOR A GO-GETTER! Ideal candidate is in a mechanical- or construction-oriented curriculum with expected graduation date of December 2026 or May 2027 Available to work part- time in the Fall 2026 Knowledge of HVAC a plus Must possess excellent technical skills in AutoCAD Must have good organizational, communication and presentation skills and a strong desire to serve the customer. Must be able to work in a fast paced environment THIS IS NOT A REMOTE OR HYBRID ROLE Local candidates preferred- no housing provided Salary: Competitive hourly pay ranging in $20-25/hr DOE. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. #P1 #LI-TL1

Location: South Africa; Philippines; Morocco; Colombia; Argentina About Huzzle At Huzzle, we connect exceptional talent with top opportunities at leading companies across the UK, US, Canada, Europe, and Australia. Our clients include fast-growing startups, digital agencies, and tech platforms in industries such as SaaS, MarTech, FinTech, and EdTech. Unlike traditional outsourcing, you’ll be placed directly with a client as a valued, long-term member of their team. About the company Our client is a results-driven digital marketing agency specifically focused on empowering the skilled trades and home services sectors across North America. The team specializes in bridging the gap between traditional craftsmanship and modern technology by providing comprehensive lead generation, search engine optimization, and custom web development strategies. By focusing on industries like construction, HVAC, plumbing, and electrical, they help local businesses scale their operations and dominate their specific regional markets through high-impact, data-backed advertising. Job Summary We are looking for a high-energy, strategically-minded Project and Growth Manager to bridge the gap between ambitious blue-collar business owners and our expert delivery team. In this role, you aren’t just a task manager; you are a marketing consultant and a trusted partner. You will own a "pod" of client accounts, ensuring every SEO campaign, lead-gen strategy, and web build ships on time and delivers measurable ROI. If you thrive on taking ownership, solving complex problems before they escalate, and identifying new ways to help small businesses grow, this is your opportunity to make a massive impact in a fast-paced agency environment. Key Responsibilities Pod Ownership: Manage the day-to-day success and retention of a dedicated portfolio of clients. Client Translation: Act as the primary bridge between clients and the delivery team, translating business goals into clear, actionable briefs for specialists. Onboarding & Relationship Management: Lead a smooth, confidence-building onboarding process for new clients and maintain proactive, responsive communication as their main point of contact. Project Oversight: Manage timelines and workflows within ClickUp to ensure all work meets high quality standards and is delivered on schedule. Marketing Consultancy: Advise clients across the full digital spectrum, including SEO, Google & Meta Ads, web design, social media, and branding. Growth & Reporting: Analyze performance data to track wins, report results in plain language, and identify upsell opportunities that align with client growth goals. Requirements Agency Experience: 2+ years of experience in account management, project management, or client success specifically within a marketing agency environment. Digital Marketing Fluency: A strong working knowledge of SEO, paid lead generation (Google & Meta), web design, and social media management. Tool Proficiency: Advanced hands-on experience with ClickUp for project management and CRM tools for client tracking. Communication Mastery: Fluent, native-level spoken and written English with the ability to lead confident, high-stakes video calls with North American business owners. Consultative Instincts: The ability to look past a task list and identify what will actually move the needle for a client’s bottom line. Organizational Excellence: Naturally organized with the ability to juggle multiple accounts, deadlines, and shifting priorities without losing focus. Nice-to-Haves Industry Context: Prior experience working with or for the trades / blue-collar industries. Technical Depth: Advanced, deep-dive understanding of SEO algorithms or Meta Ad architecture. Sales Background: Previous experience in sales or business development to help facilitate account expansion. Benefits 💻 Fully Remote: Work from anywhere with international teams 🚀 Career Growth: Join companies in SaaS, MarTech, and B2B services 🤝 Peer Community: Connect with high-performing sales professionals in our network 🧭 Ongoing Support: Receive guidance from Huzzle before and after placement 💰 Tailored Compensation: Salaries vary by client and candidate preference — we’ll match you with options that fit your goals

Location: Mäntsälä, Finland About Nebius: Nebius is leading a new era in cloud infrastructure for the global AI economy. We are building a full-stack AI cloud platform that supports developers and enterprises from data and model training through to production deployment, without the cost and complexity of building large in-house AI/ML infrastructure. Built by engineers, for engineers. From large-scale GPU orchestration to inference optimization, we own the hard problems across compute, storage, networking and applied AI. Listed on Nasdaq (NBIS) and headquartered in Amsterdam, we have a global footprint with R&D hubs across Europe, the UK, North America and Israel. Our team of 1,500+ includes hundreds of engineers with deep expertise across hardware, software and AI R&D. The role The Mechanical Operations Technician is responsible for the safe, reliable, and efficient operation, inspection, maintenance, and repair of mechanical systems supporting a mission-critical data center in Mantsala, Finland. Working as part of a 24/7 Critical Facilities Operations team, the technician ensures maximum equipment availability while supporting the site's commitments to energy efficiency, sustainability, and operational excellence. Key Responsibilities Critical Facilities Operations Operate and monitor mechanical infrastructure using the Building Management System (BMS) and routine field inspections. Respond to alarms, equipment faults, and operational events in accordance with Standard Operating Procedures (SOPs) and Emergency Operating Procedures (EOPs). Record equipment readings, operating parameters, and shift activities. Support planned switching operations and maintenance windows. Mechanical Maintenance Perform preventive, predictive, and corrective maintenance on mechanical equipment. Troubleshoot mechanical failures and carry out repairs or coordinate vendor support. Assist with commissioning, recommissioning, and integrated systems testing. Maintain accurate maintenance records using the Computerized Maintenance Management System (CMMS). Mechanical Systems Operate and maintain systems including: Chilled water systems CRAH and CRAC units Chillers Air Handling Units (AHUs) Pumps and hydronic distribution systems Heat exchangers HVAC systems District cooling and heat recovery systems (where applicable) Water treatment systems Mechanical valves and piping Expansion vessels and pressure systems Health, Safety & Compliance Work in accordance with Finnish occupational safety legislation and EU health and safety requirements. Follow Permit to Work (PTW), Lockout/Tagout (LOTO), and risk assessment procedures. Use appropriate Personal Protective Equipment (PPE). Participate in emergency response activities and incident investigations. Promote a strong safety culture and environmentally responsible work practices. Qualifications Education Vocational Qualification (Ammatillinen perustutkinto) or Bachelor's degree in Mechanical Engineering, HVAC, Building Services Engineering, Industrial Maintenance, or a related technical discipline. Equivalent technical or military experience may also be considered. Experience 2–5 years of experience maintaining mechanical systems in data centers, industrial facilities, manufacturing, hospitals, power generation, or other critical environments. Experience with Building Management Systems (BMS) and CMMS software is preferred. Technical Skills Knowledge of: HVAC and cooling systems Chilled water and hydronic systems Pumps, motors, and heat exchangers Mechanical fault diagnosis Building Management Systems (BMS) Computerized Maintenance Management Systems (CMMS) Mechanical drawings and Piping & Instrumentation Diagrams (P&IDs) Energy-efficient building systems Preferred Qualifications Occupational Safety Card (Työturvallisuuskortti) Hot Work Card (Tulityökortti) First Aid Certificate (EA1 or equivalent) Refrigerant handling qualification (where applicable) Fluent English (written and spoken) Finnish language skills are beneficial but not essential Benefits & Perks: Competitive compensation Career growth and learning opportunities Flexibility and ownership Collaborative and innovative culture Opportunity to work on impactful AI projects International environment and talented teams What's it like to work at Nebius: Fast moving - Bold thinking - Constant growth - Meaningful impact - Trust and real ownership - Opportunity to shape the future of AI Equal Opportunity Statement: Nebius is an equal opportunity employer. We are committed to fostering an inclusive and diverse workplace and to providing equal employment opportunities in all aspects of employment. We do not discriminate on the basis of race, color, religion, sex (including pregnancy), national origin, ancestry, age, disability, genetic information, marital status, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by applicable law. Applicants must be authorized to work in the country in which they apply and will be required to provide proof of employment eligibility as a condition of hire. If you need accommodations during the application process, please let us know.

Location: Long Island, NY Position Summary: The Field Engineer will serve as engineering support for our sales team assisting with construction management and after-sales field support. This role will require frequent travel to job sites throughout a specific territory but will be based at our sales office in NY area.  The position will include both field and office work. Position will involve extensive formalized training plus work under a mentor, developing skills and gaining an understanding of CaptiveAire products, troubleshooting, and application engineering processes etc. Why Work for CaptiveAire? Nation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible price Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: I can confidently say that I've never been part of a more focused company, working as one big team to achieve amazing success. There is never a day you don’t learn something new at CaptiveAire. I am able to learn something new due to the freedom to take on new tasks independently and problem solve. I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the environment, particularly in a world where remote work is common. I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. One of the things I appreciate most about CaptiveAire is how strongly it embodies the entrepreneurial spirit. I’m empowered with the autonomy to manage my work independently, while also benefiting from the robust support and resources of a large, well-established company. CaptiveAire is fast-moving and no-nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: This position will encompass a wide variety of tasks where one day does not look exactly like the next. The projects our team handles are high in volume and unique from one another, spanning throughout the whole course of design, procurement, coordination, and post-sale support. Typical tasks include: Estimated 50% to 75% of time spent in the field on job sites Supporting installations and equipment start ups to ensure high quality outcomes and adherence to engineering principles Handling complex troubleshooting issues Customer service and coordination with all parties – CaptiveAire team, contractors, engineers, installers, CaptiveAire Service Primary Job Responsibilities: A combination of being in the field working on job sites and data analysis and remote troubleshooting using building management system (travel required) Product Support - Troubleshoot issues with existing and newly installed equipment in the field and provide immediate solutions Maintain expert level knowledge of all CaptiveAire products Work closely with engineering team, service team, local sales team and customers to help find best outcomes on installed jobs On site for construction trade coordination meetings and startups to ensure a good outcome Review and analyze data gathered from installed equipment in order to make product improvements, utilizing our CASLink remote monitoring system Use mechanical building design knowledge to review applications for customers and suggest improvements in operation Perform 3 rd party training for outside contractors on CaptiveAire products Provide reports to Regional Manager as well as other teams on customer feedback/challenges, quality, product improvements/issues Required skills: 0-5 yrs experience 4 year technical degree in a mechanical, electrical, construction or science-oriented curriculum preferred Hands on, technical internship/co-op experience is preferred Must enjoy hands on product exposure HVAC and/or electrical experience strongly preferred Multi-tasking, problem solving and strong communication skills a must If not already completed, expectation of FE Exam completion in area of study for engineering graduates within 6 months of employment with CaptiveAire MUST BE A “GO GETTER”! Must be able to travel for training Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $70k-$100k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. #LI- TL1 #P1

Location: Charlotte, United States Our client is a globally recognized, privately held multinational and the world leader in premium outdoor heating solutions for residential and hospitality applications. The company has grown organically at roughly 20% per year since entering the North American market and is now hiring its first dedicated VP of Sales for North America. You will take full ownership of the North American sales function, leading a team of approximately 15 across specification sales, builder sales, inside sales, and channel management in both the U.S. and Canada. The position reports to the President of Global Heating, with accountability to the CEO. The mandate is growth and business development, not maintenance. You will build pipeline, open new markets and verticals, architect a scalable sales operating model, and drive the commercial strategy to support the company's 2027 to 2030 growth ambitions. You carry regional accountability for revenue delivery, gross margin performance, and cost-to-serve management. Requirements Essential Minimum 7 years of progressive commercial leadership in B2B environments Proven track record driving revenue growth while maintaining margin discipline across multi-region sales organizations Experience in specification-driven, technical, or premium durable goods markets (e.g., HVAC, building materials, construction products) Strong familiarity with the architect, developer, contractor, and builder ecosystem Experience managing long-cycle project pipelines from design influence through to close Business development orientation with a record of opening new verticals, territories, and strategic accounts Experience leading and coaching sales teams with structured, KPI-driven operating rhythms Financial acumen including pricing strategy, discount discipline, contribution margin analysis, and forecast accuracy Bachelor's degree in business or a related field Preferred Experience with HubSpot or similar CRM platforms and performance dashboards Background in heating, HVAC, or outdoor living products Experience managing Canadian sales operations alongside U.S. markets Benefits Base Salary: $200,000 to $220,000 Incentive Compensation: Commission structure bringing total earnings approximately 25 to 30 percent above base Paid Leave: 20 days annually Health Benefits: Comprehensive health benefit program Retirement: 401(k) plan Career Path: Clear trajectory toward global sales leadership Keller is a recruitment agency that provides services to clients ranging from startups and non profits to multinational corporations. Keller emphasizes ethical search processes, attentive candidate care, and leadership placements that support long-term client outcomes. To learn more about the firm and about our candidate services - please visit Recruitment and Executive Search Charlotte: Keller Recruitment Services, Headhunters, and Recruiters Charlotte Equal Employment Opportunity and Non-Discrimination Policy Equal Employment Opportunity Statement: Both Keller Executive Search and our clients are Equal Opportunity Employers. For all positions, whether with Keller Executive Search or our clients, qualified applicants will receive consideration for employment without regard to race, skin color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, protected veteran status, disability, genetic information, or any other legally protected status. Commitment to Diversity: Keller Executive Search and its clients are committed to fostering a diverse and inclusive work environment where all individuals are valued and respected. Reasonable Accommodations: Both Keller Executive Search and our clients are committed to providing reasonable accommodations to individuals with disabilities and pregnant individuals. We engage in an interactive process to determine effective, reasonable accommodations. Compensation Information: For client positions, compensation information is available in the job post. If not provided, it will be shared during the interview process in accordance with applicable laws. When required by law, salary ranges will be included in job postings. Actual salary may depend on skills, experience, and comparison to current employees in similar roles. Salary ranges may vary based on role and location. Compliance with Laws: Both Keller Executive Search and our clients comply with federal, state, and local laws governing nondiscrimination in employment. This policy applies to all employment terms and conditions, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Workplace Harassment: Both Keller Executive Search and our clients expressly prohibit any form of workplace harassment based on race, skin color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. E-Verify Participation: Keller Executive Search and/or our clients may participate in E-Verify. Information about E-Verify participation will be provided during the application process where applicable. Privacy and Pay Equity: California Residents: For more information about the categories of personal information we collect for recruiting and employment purposes, please review our Privacy Policy. Colorado, Nevada, New York City, California, and Washington Residents: Compensation information is available in the job post or will be provided during the interview process if not initially available. Both Keller Executive Search and our clients are committed to pay equity and conduct periodic pay equity analyses in accordance with applicable laws. State-Specific Information: Rhode Island: We do not request or require salary history from applicants. Connecticut: We provide wage range information upon request or before discussing compensation. New Jersey: We do not inquire about salary history unless voluntarily disclosed. Veteran Status: Both Keller Executive Search and our clients provide equal employment opportunities to veterans and comply with applicable state laws regarding veteran preference in employment. If you are a veteran, please inform us during the application process. Genetic Information: In accordance with federal and state laws, both Keller Executive Search and our clients do not discriminate based on genetic information. We do not request or require genetic information from applicants or employees, except as permitted by law. Local Laws: Both Keller Executive Search and our clients comply with all applicable local laws and ordinances regarding employment practices in the areas where we operate. Keller Executive Search and our clients may use artificial intelligence (AI) tools to assist in the recruitment and candidate evaluation process. These tools are used exclusively to support human decision-making by helping to review and assess candidate qualifications and materials. AI is never used to automatically reject, disqualify, or make final hiring decisions about candidates. All AI-assisted evaluations are reviewed by experienced recruitment professionals, and all hiring decisions are made by qualified human recruiters. Our use of AI is designed to enhance fairness, consistency, and efficiency while maintaining our commitment to equal employment opportunity and non-discrimination principles. Note: This job posting may be for a position with Keller Executive Search or one of our clients. The specific employer will be identified during the application and interview process. Employment laws and requirements may vary depending on the employer and location.

Location: Jeddah, Saudi Arabia; Riyadh, Saudi Arabia Data Center Planner oversees activities carried out by 24x7 shift teams for Data Centers as well as responsible for ensuring sufficient personnel is available for each Operations shift. Shall also carry out capacity planning, ensuring new deployments meet the capacity requirements. Is responsible for making sure the racking and associated activities, including any changes, are in compliance with the Data Center standards and Change processes. The work location would be in Thuwwal, Saudi Arabia. Scope of Work Capacity planning for Data Center hosting. Prepare racking diagrams and assign it to relevant shifts. Oversee racking and related activities carried out by the DC Operations team. Manage the shift schedule for the Data Center Operations. Liaise with OSP/ISP Team for the interbuilding connectivity requirements. Plan and recommend Data Center Operational requirements. Vendor Management Manage Data Center Asset Register Oversee break/fix of all Windows/Linux servers throughout the Data Center when hardware failures occur by helping the system owners/proponents troubleshoot issues and sending the appropriate hardware in coordination with the Vendor. Proactive Monitoring and recording of facility security, HVAC, Fire Detection and Suppression Systems, Temperature, Humidity and critical power systems. Ensuring that the Data Center is secure at all times. Ensure all visitors are signed in and escorted at all times while in the Data Centers. Perform other various misc. operational duties as per the SOP approved by the Data Center Lead Compliance with TIA 942 standards for Copper and Fiber cabling across all Data Centers Interface with vendors such as HP, Dell, SUN and Supermicro on the implementation of hardware/systems. Willing to work a flexible shift including nights and weekends, and participate in an on-call rotation, if and when required. Participates and performs any other tasks that are assigned by upper management as required. Requirements BS or diploma in computer science engineering, IT, Electrical/ Electronics engineering or Mechanical engineering is required. Minimum 5 years of IT experience with at least 3 years in Data Centers. APC infrastructure experience is required. Should be able to co-ordinate the day to day activities and preventive maintenance with the facility team and IT staff as per the instructions of the Data Center Lead. Should have good experience with communications circuits and Ethernet cabling (structured copper cabling and fiber optic cables). Proficient in Windows server and Linux configuration and troubleshooting. Proficient in MS Office. Basic knowledge of electrical and mechanical components like Online Double Conversion UPS, Dynamic Rotary UPS, medium/low voltage circuits, and chilled water-cooled HVAC systems.

Location: New York HQ Workplace: OnSite ABOUT AVOCA Avoca is transforming how home service companies engage with their customers. Our AI-powered conversational agents handle every high-value inbound call, from booking jobs, qualifying leads, and driving higher revenue, all at a speed and consistency unmatched by human call centers. We're a Series B startup backed by Kleiner Perkins, Meritech Capital, General Catalyst, and other top-tier investors, with $125M raised and a $1B valuation. We grew 10x in 2025 and have scaled to 170+ employees in under two years across our NYC headquarters and Santa Barbara office. In a $1T+ market where 85% of missed calls go to competitors, we're building the category-defining platform for AI-driven customer engagement, serving the largest brands in home services. With high-energy, in-office teams in both locations, every hire here has an immediate and visible impact. ABOUT THE ROLE We're hiring a Channel Partner Manager to build one of Avoca's most important revenue engines: partnerships with the HVAC manufacturers, OEMs, and distributors that sit upstream of every contractor. Avoca has established itself as the leading brand and AI partner in the home services industry through partnerships across several channels, and this role owns distribution through the OEM and supplier layer. These partnerships put Avoca in front of thousands of home services operators at once, with the credibility of brands they already know and trust. You'll own a revenue goal and a portfolio of these relationships, from OEMs like Trane, Daikin, and Carrier to their distribution networks. You'll take partnerships end to end: finding the opportunity, structuring the relationship, and turning it into repeatable pipeline and revenue. This is a small, fast-moving team, so you'll wear many hats and help build the playbook as much as run it. You'll report directly to the Head of Partnerships and work closely with leadership on our highest-priority partner initiatives. WHAT YOU'LL DO - Own a portfolio of partner relationships end to end, from first conversation to signed partnership to revenue - Build partnerships across HVAC manufacturers, OEMs, distributors, and their territory managers, including the co-op programs that fund and shape how these partnerships work - Structure partnerships that create real distribution: co-marketing, referral motions, preferred-vendor positioning, joint events, and go-to-market - Turn relationships into measurable partner-sourced pipeline and ARR, and own those numbers - Represent Avoca with partners and at industry events, with travel as needed, heavier during conference season - Work closely with Sales, RevOps, and Marketing to convert partner introductions into closed business WHAT YOU'LL BRING - Direct experience in the home services industry building channel partnerships with HVAC manufacturers and distributors like Trane, Daikin, Carrier, or Ferguson - Existing relationships you can activate quickly, with manufacturer channel leaders and distributor territory managers, plus an understanding of how co-op works - Experience with channel, co-marketing, or partner-sourced revenue motions - 4+ years of professional experience, with 6 to 10 years the ideal range - A track record of building and closing partnerships or commercial relationships, not just managing existing ones - Strong commercial instinct and clear communication with both field operators and executives - High agency and pace: you build the playbook and move at the speed of a high-growth startup, not a legacy player WHO YOU ARE - You know the home services world well enough to bring a point of view and a network with you, not build both from scratch - You're a relationship builder who's equally comfortable in the field and in a boardroom - You think in systems: you can look at a fragmented landscape and quickly see where the leverage is - You want to own a book of partnerships, carry a number, and shape what this function becomes BENEFITS - Comprehensive medical, dental, and vision insurance - Company-sponsored 401(k) through Vestwell - Flexible PTO plus U.S. federal holidays - Company-wide off-sites - Monthly wellness stipend - Daily in-office lunch through Parkday - Dinner covered when working late - Commuter benefits and late-night rideshare - Standing desks and workspace accommodations available on request - All core tools and software provided Compensation: The expected base salary for this role is $160,000-$220,000 with final compensation based on experience, skills, and qualifications determined during the interview process. Avoca's total compensation package includes base salary, bonus, equity, and a comprehensive suite of benefits and perks. Our Recruiting team will share the full details as you progress through our hiring process. WHY AVOCA At Avoca, you’ll be part of a team that’s building a category-defining company at the center of a massive market opportunity. We’re a fast-moving, collaborative team with a culture designed for builders who thrive on speed, iteration, and impact. Avoca provides equal employment opportunities to applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability.

Location: Dubai, United Arab Emirates Comprehensive Position Overview: Role Function: The Duct Fabricator plays a critical role within the Mechanical, Electrical, and Plumbing (MEP) and HVAC divisions, converting engineering specifications into structural duct systems required for proper air distribution, ventilation, and climate control across commercial, residential, and industrial facilities. Operational Environment: Works primarily within off-site sheet metal workshops, pre-fabrication yards, or dedicated on-site fabrication areas alongside mechanical engineers, quality control inspectors, and assembly teams. Detailed Technical Responsibilities: Pattern Development & Material Selection: Analyze complex HVAC shop drawings, cut sheets, and Bill of Quantities (BOQ) to perform accurate material take-offs. Lay out, stretch, and develop patterns for custom sheet metal fittings—including offset transitions, bullhead tees, square-to-round adapters, and fire damper casings—minimizing material scrap. Select appropriate sheet metal gauges (typically 18 to 26 gauge GI or specialized PI panels) based on system static pressure classifications and airflow parameters. Precision Fabrication & Assembly Procedures: Cut sheet metal accurately using foot shears, hand snips, and automated plasma cutting tables. Form joint edges, standing seams, drive cleats, Pittsburgh locks, and snap locks using specialized roll formers and folder machines. Assemble duct sections securely using spot welding, riveting, self-tapping screws, or specialized mechanical clinching techniques. Insulation & Cladding Application: Measure, cut, and apply internal or external insulation materials, including fiberglass insulation board, elastomeric rubber (Nitrile), and rockwool. Secure insulation with mechanical fasteners, stick pins, and high-performance spray adhesives, applying aluminum foil vapor barrier tape to guarantee airtight thermal protection. Fabricate weather-proof metal cladding (Alu-Zinc or Aluminum) for external, rooftop ductwork installations exposed to extreme desert conditions. Quality Standards & Testing Protocols: Verify cross-sectional dimensions, diagonal alignment, and flatness tolerances before dispatching finished units to the installation crew. Execute light testing and pressure-drop/air-leakage testing per SMACNA (Sheet Metal and Air Conditioning Contractors' National Association) or DW144 guidelines. Ensure all fabricated assemblies comply with local authority civil defense regulations (e.g., Dubai Civil Defense fire-rated duct requirements). Requirements Formal Technical Education: Industrial Training Institute (ITI) Certificate, Vocational Trade Diploma, or Technical High School Certificate specializing in Sheet Metal Working, Mechanical Trade, or Fitting. Demonstrated Technical Expertise: Minimum of 3 to 5 years of verified experience in high-volume HVAC duct production within the UAE or wider GCC region. Practical knowledge of sheet metal bend allowances, stretch-outs, and seam allowances. Familiarity with SMACNA, DW144, ASHRAE, and Dubai Municipality green building code specifications. Soft Skills & Operational Attributes: Strong spatial reasoning skills to visualize 3D objects from 2D orthographic engineering plans. Strict commitment to occupational health and safety (HSE) standards, including the consistent use of Personal Protective Equipment (PPE) such as cut-resistant gloves, ear protection, and safety boots. Ability to perform physical labor involving heavy lifting, extended standing, and operating vibrating machinery. Benefits Competitive salary; Official UAE employment status; Comprehensive medical insurance coverage; Working schedule 6 days per week from Monday to Saturday and Sunday is off.

Location: Dallas, Texas, United States BRPH is a technically focused, creative architecture, engineering, and construction company with over six decades of expertise in helping mission-driven clients in the aerospace, defense, manufacturing, commercial, education, entertainment, hospitality, and federal markets identify gaps in their program delivery and develop innovative solutions to their most challenging problems across the U.S. and around the world. Consistently ranked among the nation’s top firms, we take pride in solving complex challenges with forward-thinking solutions. As an employee-owned company, BRPH is known for its collaborative culture, technical excellence, and client-focused approach, bringing together multidisciplinary teams to design and build environments that are functional, efficient, and future-ready. Overview Our senior mechanical engineer requires thorough knowledge of HVAC design processes, from planning jobs, supervising heating/cooling load and ventilation calculations, selecting equipment, and coordinating complete sets of construction documents, including specifications, and providing typical construction administration services throughout the construction process. This position also requires supervision of building plumbing design efforts, although thorough understanding of plumbing design is not required. A senior mechanical engineer will typically supervise project teams that include junior engineers and designers. Job Responsibilities Primary function of this Engineer Level is the complete ability to take any size job from inception through project closeout.  This will include understanding and/or developing the project’s scope, fee and schedule.  Input into the three activities may be required.  All work will be subject to peer reviews and Director’s reviews when applicable. Performs assignments designed to continue to develop complex professional engineering work knowledge and abilities, requiring application of standard techniques, procedures, and criteria in carrying out a sequence of related engineering tasks.  Assignments require independent judgement and application of a non-routine, complex nature.  Applies intensive and diversified knowledge of engineering principles and practices in broad areas of assignments and related fields.  Makes decisions independently on engineering problems and methods, and represents the company to resolve important questions and to plan and coordinate work.  Requires the use of advanced techniques and the modification and extension of theories, precepts and practices of engineering. The knowledge and expertise required for this level of work results from progressive experience and education.  Assignments usually include complex engineering tasks and calculations with limited technical guidance on non-standard issues.  Must coordinate with and help resolve conflicts with other disciplines based on an excellent understanding of the design process.  Responsible for the preparation of project specific construction specifications and for all aspects of construction administration.  Assignments may include managerial tasks of both project and personnel nature. Prepares reports, specifications, plans, construction and design schedules, cost estimates and level II plans (including developing mechanical manhour fee estimates). Has working knowledge of computer aided design drafting to produce designs into routine final drawings, and performs limited CADD operations. Research discipline-related code issues and present interpretation. Visits construction sites to review, monitor, and report progress and perform other construction administration duties, such as shop drawing review, attend construction site meetings, answering RFI’s, preparing supplemental instructions and proposal requests, writing status reports, etc. Must be proficient in the use of: •    Microsoft Windows, Excel, Word and Bluebeam •    Trane Trace Load 700 •    Model energy codes •    Miscellaneous mechanical system and product selection and sizing software Duties may include, or assisting in, supervising, coordinating and checking the work, as well as instructing, leading and mentoring other staff members. Perform checking of one’s own work and work prepared by drafters, engineering designers and other engineers. Provide coordination of all applicable project discipline’s drawings and specifications. Assist in preparing design budgets, marketing proposals and cost estimates. Assist in client contact and communication pertaining to specific projects. Promote communication, cooperation and quality among staff. Promotes and represents the firm in a professional manner. Develops engineering proposals and agreements for assigned projects. Prepares forecast of workload and resources for assigned projects and/or department. Prepares and monitors project budgets.  Has overall responsibility for the profitability of his/her projects. Responsible for meeting project schedules, timely completion and quality of assigned projects. May serve as a project manager or project engineer on assigned projects. Assist in marketing and presentations. Should be active in professional trade organizations. Education and/or Experience Minimum of bachelor’s degree in engineering from an accredited four-year college or university. Minimum of eight years of experience as an engineer in Mechanical Engineering. Certificates, Licenses, Registrations Must have passed the NCEES exam and be licensed as a Professional Engineer Physical Requirements Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This job description may be changed to include new responsibilities and tasks or change existing ones as management deems necessary. EOE, including Disability/Vets

Location: Denver, Colorado, United States BRPH is a technically focused, creative architecture, engineering, and construction company with over six decades of expertise in helping mission-driven clients in the aerospace, defense, manufacturing, commercial, education, entertainment, hospitality, and federal markets identify gaps in their program delivery and develop innovative solutions to their most challenging problems across the U.S. and around the world. Consistently ranked among the nation’s top firms, we take pride in solving complex challenges with forward-thinking solutions. As an employee-owned company, BRPH is known for its collaborative culture, technical excellence, and client-focused approach, bringing together multidisciplinary teams to design and build environments that are functional, efficient, and future-ready. Overview Our senior mechanical engineer requires thorough knowledge of HVAC design processes, from planning jobs, supervising heating/cooling load and ventilation calculations, selecting equipment, and coordinating complete sets of construction documents, including specifications, and providing typical construction administration services throughout the construction process. This position also requires supervision of building plumbing design efforts, although thorough understanding of plumbing design is not required. A senior mechanical engineer will typically supervise project teams that include junior engineers and designers. Job Responsibilities Primary function of this Engineer Level is the complete ability to take any size job from inception through project closeout.  This will include understanding and/or developing the project’s scope, fee and schedule.  Input into the three activities may be required.  All work will be subject to peer reviews and Director’s reviews when applicable. Performs assignments designed to continue to develop complex professional engineering work knowledge and abilities, requiring application of standard techniques, procedures, and criteria in carrying out a sequence of related engineering tasks.  Assignments require independent judgement and application of a non-routine, complex nature.  Applies intensive and diversified knowledge of engineering principles and practices in broad areas of assignments and related fields.  Makes decisions independently on engineering problems and methods, and represents the company to resolve important questions and to plan and coordinate work.  Requires the use of advanced techniques and the modification and extension of theories, precepts and practices of engineering. The knowledge and expertise required for this level of work results from progressive experience and education.  Assignments usually include complex engineering tasks and calculations with limited technical guidance on non-standard issues.  Must coordinate with and help resolve conflicts with other disciplines based on an excellent understanding of the design process.  Responsible for the preparation of project specific construction specifications and for all aspects of construction administration.  Assignments may include managerial tasks of both project and personnel nature. Prepares reports, specifications, plans, construction and design schedules, cost estimates and level II plans (including developing mechanical manhour fee estimates). Has working knowledge of computer aided design drafting to produce designs into routine final drawings, and performs limited CADD operations. Research discipline-related code issues and present interpretation. Visits construction sites to review, monitor, and report progress and perform other construction administration duties, such as shop drawing review, attend construction site meetings, answering RFI’s, preparing supplemental instructions and proposal requests, writing status reports, etc. Must be proficient in the use of: •    Microsoft Windows, Excel, Word and Bluebeam •    Trane Trace Load 700 •    Model energy codes •    Miscellaneous mechanical system and product selection and sizing software Duties may include, or assisting in, supervising, coordinating and checking the work, as well as instructing, leading and mentoring other staff members. Perform checking of one’s own work and work prepared by drafters, engineering designers and other engineers. Provide coordination of all applicable project discipline’s drawings and specifications. Assist in preparing design budgets, marketing proposals and cost estimates. Assist in client contact and communication pertaining to specific projects. Promote communication, cooperation and quality among staff. Promotes and represents the firm in a professional manner. Develops engineering proposals and agreements for assigned projects. Prepares forecast of workload and resources for assigned projects and/or department. Prepares and monitors project budgets.  Has overall responsibility for the profitability of his/her projects. Responsible for meeting project schedules, timely completion and quality of assigned projects. May serve as a project manager or project engineer on assigned projects. Assist in marketing and presentations. Should be active in professional trade organizations. Education and/or Experience Minimum of bachelor’s degree in engineering from an accredited four-year college or university. Minimum of eight years of experience as an engineer in Mechanical Engineering. Certificates, Licenses, Registrations Must have passed the NCEES exam and be licensed as a Professional Engineer Salary Range In compliance with pay transparency requirements, the salary range for this role is $109,000 - $170,200. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. Physical Requirements Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. In compliance with pay transparency requirements, the salary range for this role is shown below. This is not a guarantee of compensation or salary, as the final offer amount may vary based on factors including, but not limited to, experience and geographic location Colorado Pay Range $109,000 — $170,200 USD This job description may be changed to include new responsibilities and tasks or change existing ones as management deems necessary. EOE, including Disability/Vets

Location: Albany, NY Position Summary: Seeking a driven and motivated engineer to join our sales team focusing on growing business with existing customers and developing new business. This position will involve applications engineering, sales support and field service work. Sales Engineers should be comfortable working in a result-driven, fast-paced environment. Position will involve extensive formalized training plus work under a mentor, developing skills and gaining an understanding of CaptiveAire products, how we go to market, application engineering processes etc. as well as business development and sales strategies. Why Work for CaptiveAire ? N ation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment.  Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible pric e Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for P rofessional E ngineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: There is never a day you don’t learn something new a t CaptiveAi re . I am able to learn something new due to the freedom to take on new tasks independently and problem solv e. I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the in-office work environment.I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. One of the things I appreciate most about CaptiveAire is how strongly it embodies the entrepreneurial spirit. I’m empowered with the autonomy to manage my work independently, while also benefiting from the robust support and resources of a large, well-established company . CaptiveAire is fast-moving and no- nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: A technical sales role encompasses a wide variety of tasks where one day does not look exactly like the next. The projects our team handle s are high in volume and unique from one another, spanning throughout the whole course of design, procurement, coordination, and post-sale support. Typical tasks include: Outside sales meetings and calls to build relationships with existing and new customers Application engineering to apply our products using sound engineering principles Project management of installations in progress - M anaging schedules/plans to guarantee we can get equipment on site when the site needs it, in turn creating satisfied and returning customers. Service and technical support of existing equipment Supporting end users to maintain high levels of customer service, from assisting contractors with wiring on site to remote troubleshooting for staff in the kitchen. T wo to three full days per week in the office working on bids, one to two days on job sites, and dedicate another day to developing the territory. Territory development may include giving presentations to the engineering community, visiting new customers, or expanding contacts with an existing account. Comments from some of ou r sales engineers: Every day I get to help someone. Whether it's an engineer with a design, a contractor with a troubleshooting issue, or an end user looking for help to obtain better indoor air quality. I get to use my engineering skills, people skills and business skills every day. Our main "role" is not to sell products but to provide solutions - kitchen ventilation solutions, commercial ventilation solutions, heating/air conditioning solutions. I enjoy getting to work directly with end users and helping them complete their business goals. Attending a soft opening after completing a full design-build project with an owner is rewarding. I love the balance between working on designs in the office and also having that face to face interaction with our customers. It's awesome to handle the design phase of a project, then also take charge of the procurement process with the end user/customer and lastly watch our equipment perform as designed once installed and the project is complete. I also love the growth aspect of my role, I enjoy molding and shaping our business in order to set it up for success and then see the value we are adding to the market. Primary Job Responsibilities: Provide integrated application engineering and design support for a wide range of ventilation applications with the goal of providing sustainable products and the latest technologies best designed to meet the customers’ needs. Work directly with Engineers, Contractors, End Users, and Food Service Dealers. Daily tasks include inside sales support, application engineering and outside sales. Responsibilities will vary and may include presentations, quotes, submittals, technical product support, job site visits and hands on troubleshooting as needed. Educate and promote CaptiveAire products to users in your market.  This includes conference calls, meetings, organizing presentations, and product demos. Research and develop new business opportunities with new and existing users. Top notch customer service and willingness to go above and beyond to serve the customer. Quick turnaround times a priority. Continuously evaluate and improve processes as well as the customer experience. This position will train in Rochester  6-12 months pending experience. Required skills: 0-5 years experience 4 year technical degree in a mechanical, electrical, construction or science-oriented curriculum preferred Excellent computer, organizational and communication/presentation skills Problem solving with a passion for continuous learning Strong desire to interface with the customer Embrace new technologies and business savvy Passion for work with aggressive nature to succeed Willing to travel for various training opportunities If not already completed, expectation of FE Exam completion in area of study for engineering graduates within 6 months of employment with CaptiveAire MUST BE A “GO GETTER”! Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $70k-$100k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time, we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. #LI- TL1 #P1

Location: Ottawa, Ontario Position Summary: Seeking a driven and motivated engineer to join our sales team focusing on growing business with existing customers and developing new business. This position will involve applications engineering, sales support and field service work. Sales Engineers should be comfortable working in a result-driven, fast-paced environment. Position will involve extensive formalized training plus work under a mentor, developing skills and gaining an understanding of CaptiveAire products, how we go to market, application engineering processes etc. as well as business development and sales strategies. Why Work for CaptiveAire ? N ation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment.  Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible pric e Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for P rofessional E ngineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: There is never a day you don’t learn something new a t CaptiveAi re . I am able to learn something new due to the freedom to take on new tasks independently and problem solv e. I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the in-office work environment.I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. One of the things I appreciate most about CaptiveAire is how strongly it embodies the entrepreneurial spirit. I’m empowered with the autonomy to manage my work independently, while also benefiting from the robust support and resources of a large, well-established company . CaptiveAire is fast-moving and no- nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: A technical sales role encompasses a wide variety of tasks where one day does not look exactly like the next. The projects our team handle s are high in volume and unique from one another, spanning throughout the whole course of design, procurement, coordination, and post-sale support. Typical tasks include: Outside sales meetings and calls to build relationships with existing and new customers Application engineering to apply our products using sound engineering principles Project management of installations in progress - M anaging schedules/plans to guarantee we can get equipment on site when the site needs it, in turn creating satisfied and returning customers. Service and technical support of existing equipment Supporting end users to maintain high levels of customer service, from assisting contractors with wiring on site to remote troubleshooting for staff in the kitchen. T wo to three full days per week in the office working on bids, one to two days on job sites, and dedicate another day to developing the territory. Territory development may include giving presentations to the engineering community, visiting new customers, or expanding contacts with an existing account. Comments from some of ou r sales engineers: Every day I get to help someone. Whether it's an engineer with a design, a contractor with a troubleshooting issue, or an end user looking for help to obtain better indoor air quality. I get to use my engineering skills, people skills and business skills every day. Our main "role" is not to sell products but to provide solutions - kitchen ventilation solutions, commercial ventilation solutions, heating/air conditioning solutions. I enjoy getting to work directly with end users and helping them complete their business goals. Attending a soft opening after completing a full design-build project with an owner is rewarding. I love the balance between working on designs in the office and also having that face to face interaction with our customers. It's awesome to handle the design phase of a project, then also take charge of the procurement process with the end user/customer and lastly watch our equipment perform as designed once installed and the project is complete. I also love the growth aspect of my role, I enjoy molding and shaping our business in order to set it up for success and then see the value we are adding to the market. Primary Job Responsibilities: Provide integrated application engineering and design support for a wide range of ventilation applications with the goal of providing sustainable products and the latest technologies best designed to meet the customers’ needs. Work directly with Engineers, Contractors, End Users, and Food Service Dealers. Daily tasks include inside sales support, application engineering and outside sales. Responsibilities will vary and may include presentations, quotes, submittals, technical product support, job site visits and hands on troubleshooting as needed. Educate and promote CaptiveAire products to users in your market.  This includes conference calls, meetings, organizing presentations, and product demos. Research and develop new business opportunities with new and existing users. Top notch customer service and willingness to go above and beyond to serve the customer. Quick turnaround times a priority. Continuously evaluate and improve processes as well as the customer experience. This position will train in Toronto, 6-12 months pending experience Required skills: 2-3 years experience 4 year technical degree in a mechanical, electrical, construction or science-oriented curriculum preferred Excellent computer, organizational and communication/presentation skills Problem solving with a passion for continuous learning Strong desire to interface with the customer Embrace new technologies and business savvy Passion for work with aggressive nature to succeed Willing to travel for various training opportunities MUST BE A “GO GETTER”! Benefits: Extended Health Care and Dental benefits Disability & life insurance Retirement plan with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (P.Eng) License Relocation assistance Salary: $70k-$100k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. #LI- TL1 #P1

Location: Charlotte, NC Position Summary: Seeking a driven and motivated engineer to join our sales team focusing on growing business with existing customers and developing new business. This position will involve applications engineering, sales support and field service work. Sales Engineers should be comfortable working in a result-driven, fast-paced environment. Position will involve extensive formalized training plus work under a mentor, developing skills and gaining an understanding of CaptiveAire products, how we go to market, application engineering processes etc. as well as business development and sales strategies. Why Work for CaptiveAire ? N ation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment.  Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible pric e Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for P rofessional E ngineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: There is never a day you don’t learn something new a t CaptiveAi re . I am able to learn something new due to the freedom to take on new tasks independently and problem solv e. I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the in-office work environment.I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. One of the things I appreciate most about CaptiveAire is how strongly it embodies the entrepreneurial spirit. I’m empowered with the autonomy to manage my work independently, while also benefiting from the robust support and resources of a large, well-established company . CaptiveAire is fast-moving and no- nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: A technical sales role encompasses a wide variety of tasks where one day does not look exactly like the next. The projects our team handle s are high in volume and unique from one another, spanning throughout the whole course of design, procurement, coordination, and post-sale support. Typical tasks include: Outside sales meetings and calls to build relationships with existing and new customers Application engineering to apply our products using sound engineering principles Project management of installations in progress - M anaging schedules/plans to guarantee we can get equipment on site when the site needs it, in turn creating satisfied and returning customers. Service and technical support of existing equipment Supporting end users to maintain high levels of customer service, from assisting contractors with wiring on site to remote troubleshooting for staff in the kitchen. T wo to three full days per week in the office working on bids, one to two days on job sites, and dedicate another day to developing the territory. Territory development may include giving presentations to the engineering community, visiting new customers, or expanding contacts with an existing account. Comments from some of ou r sales engineers: Every day I get to help someone. Whether it's an engineer with a design, a contractor with a troubleshooting issue, or an end user looking for help to obtain better indoor air quality. I get to use my engineering skills, people skills and business skills every day. Our main "role" is not to sell products but to provide solutions - kitchen ventilation solutions, commercial ventilation solutions, heating/air conditioning solutions. I enjoy getting to work directly with end users and helping them complete their business goals. Attending a soft opening after completing a full design-build project with an owner is rewarding. I love the balance between working on designs in the office and also having that face to face interaction with our customers. It's awesome to handle the design phase of a project, then also take charge of the procurement process with the end user/customer and lastly watch our equipment perform as designed once installed and the project is complete. I also love the growth aspect of my role, I enjoy molding and shaping our business in order to set it up for success and then see the value we are adding to the market. Primary Job Responsibilities: Provide integrated application engineering and design support for a wide range of ventilation applications with the goal of providing sustainable products and the latest technologies best designed to meet the customers’ needs. Work directly with Engineers, Contractors, End Users, and Food Service Dealers. Daily tasks include inside sales support, application engineering and outside sales. Responsibilities will vary and may include presentations, quotes, submittals, technical product support, job site visits and hands on troubleshooting as needed. Educate and promote CaptiveAire products to users in your market.  This includes conference calls, meetings, organizing presentations, and product demos. Research and develop new business opportunities with new and existing users. Top notch customer service and willingness to go above and beyond to serve the customer. Quick turnaround times a priority. Continuously evaluate and improve processes as well as the customer experience. Required skills: 0-5 years experience 4 year technical degree in a mechanical, electrical, construction or science-oriented curriculum preferred Excellent computer, organizational and communication/presentation skills Problem solving with a passion for continuous learning Strong desire to interface with the customer Embrace new technologies and business savvy Passion for work with aggressive nature to succeed Willing to travel for various training opportunities If not already completed, expectation of FE Exam completion in area of study for engineering graduates within 6 months of employment with CaptiveAire MUST BE A “GO GETTER”! Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $70k-$100k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time, we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. #LI- TL1 #P1

Location: Greenville, SC Position Summary: Seeking a driven and motivated engineer to join our sales team focusing on growing business with existing customers and developing new business. This position will involve applications engineering, sales support and field service work. Sales Engineers should be comfortable working in a result-driven, fast-paced environment. Position will involve extensive formalized training plus work under a mentor, developing skills and gaining an understanding of CaptiveAire products, how we go to market, application engineering processes etc. as well as business development and sales strategies. Why Work for CaptiveAire ? N ation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment.  Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible pric e Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for P rofessional E ngineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: There is never a day you don’t learn something new a t CaptiveAi re . I am able to learn something new due to the freedom to take on new tasks independently and problem solv e. I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the in-office work environment.I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. One of the things I appreciate most about CaptiveAire is how strongly it embodies the entrepreneurial spirit. I’m empowered with the autonomy to manage my work independently, while also benefiting from the robust support and resources of a large, well-established company . CaptiveAire is fast-moving and no- nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: A technical sales role encompasses a wide variety of tasks where one day does not look exactly like the next. The projects our team handle s are high in volume and unique from one another, spanning throughout the whole course of design, procurement, coordination, and post-sale support. Typical tasks include: Outside sales meetings and calls to build relationships with existing and new customers Application engineering to apply our products using sound engineering principles Project management of installations in progress - M anaging schedules/plans to guarantee we can get equipment on site when the site needs it, in turn creating satisfied and returning customers. Service and technical support of existing equipment Supporting end users to maintain high levels of customer service, from assisting contractors with wiring on site to remote troubleshooting for staff in the kitchen. T wo to three full days per week in the office working on bids, one to two days on job sites, and dedicate another day to developing the territory. Territory development may include giving presentations to the engineering community, visiting new customers, or expanding contacts with an existing account. Comments from some of ou r sales engineers: Every day I get to help someone. Whether it's an engineer with a design, a contractor with a troubleshooting issue, or an end user looking for help to obtain better indoor air quality. I get to use my engineering skills, people skills and business skills every day. Our main "role" is not to sell products but to provide solutions - kitchen ventilation solutions, commercial ventilation solutions, heating/air conditioning solutions. I enjoy getting to work directly with end users and helping them complete their business goals. Attending a soft opening after completing a full design-build project with an owner is rewarding. I love the balance between working on designs in the office and also having that face to face interaction with our customers. It's awesome to handle the design phase of a project, then also take charge of the procurement process with the end user/customer and lastly watch our equipment perform as designed once installed and the project is complete. I also love the growth aspect of my role, I enjoy molding and shaping our business in order to set it up for success and then see the value we are adding to the market. Primary Job Responsibilities: Provide integrated application engineering and design support for a wide range of ventilation applications with the goal of providing sustainable products and the latest technologies best designed to meet the customers’ needs. Work directly with Engineers, Contractors, End Users, and Food Service Dealers. Daily tasks include inside sales support, application engineering and outside sales. Responsibilities will vary and may include presentations, quotes, submittals, technical product support, job site visits and hands on troubleshooting as needed. Educate and promote CaptiveAire products to users in your market.  This includes conference calls, meetings, organizing presentations, and product demos. Research and develop new business opportunities with new and existing users. Top notch customer service and willingness to go above and beyond to serve the customer. Quick turnaround times a priority. Continuously evaluate and improve processes as well as the customer experience. This role will train out of Augusta, GA for 6-12 months pending experience Required skills: 0-5 years experience 4 year technical degree in a mechanical, electrical, construction or science-oriented curriculum preferred Excellent computer, organizational and communication/presentation skills Problem solving with a passion for continuous learning Strong desire to interface with the customer Embrace new technologies and business savvy Passion for work with aggressive nature to succeed Willing to travel for various training opportunities If not already completed, expectation of FE Exam completion in area of study for engineering graduates within 6 months of employment with CaptiveAire MUST BE A “GO GETTER”! Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $70k-$100k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time, we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. #LI- TL1 #P1

Location: Cyprus Workplace: onsite About You Xsolla is opening a Club in Limassol — a physical hub for the game development community, partners, and the local video-games ecosystem. We are looking for a Club Administrator to take ownership of the venue from the construction phase through to full daily operation. This is a hands-on, high-autonomy role. In the first phase, you will supervise the build-out and ensure the space is delivered exactly to our design intent. Once the Club opens, you become the person who keeps it running — operations, suppliers, events, compliance, and the day-to-day relationships with the landlord, building management company and local authorities. If you are organised, comfortable holding contractors and vendors to a standard, and enjoy being the go-to person for a physical space that people care about, this role will suit you. About Us Xsolla is a global commerce company with robust tools and services to help developers solve the inherent challenges of the video game industry. From indie to AAA, companies partner with Xsolla to help them fund, distribute, market, and monetize their games. Grounded in the belief in the future of video games, Xsolla is resolute in the mission to bring opportunities together, and continually make new resources available to creators. Headquartered and incorporated in Los Angeles, California, Xsolla operates as the merchant of record and has helped over 1,500+ game developers to reach more players and grow their businesses around the world. With more paths to profits and ways to win, developers have all the things needed to enjoy the game. For more information, visit xsolla.com. Key Responsibilities Design & Construction Supervision (pre-opening) Supervise the execution of the approved design project, including all construction, fit-out, and finishing works Ensure all works comply with Xsolla internal design guidelines and brand standards; escalate and resolve deviations before they become permanent Coordinate contractors, subcontractors, and site schedules; track progress against timelines, budget, and quality expectations Manage snag lists, technical acceptance, and formal handover of the completed space Maintain full documentation of the project: drawings, approvals, change requests, certificates, and warranties Day-to-Day Club Operations (post-opening) Own the daily operation of the Club: opening and closing procedures, access control, space readiness, and general upkeep Oversee maintenance, cleaning, technical systems (HVAC, AV, IT infrastructure, security), and preventative servicing Manage room and space bookings, capacity planning, and the operational calendar Act as the first point of contact for anything related to the physical space Supplies, Vendors & Procurement Control all supplies and inventory: office and hospitality consumables, F&B, equipment, and event materials Source, onboard, and manage vendors and service providers; negotiate terms and monitor performance Handle purchase requests, contracts, invoices, and reconciliation in line with internal finance procedures Track and report operational spend against the approved Club budget Authorities, Landlord & Regulatory Affairs Serve as the primary liaison with local authorities and their representatives Lead or support negotiations with the landlord and building management on lease matters, works approvals, service charges, and access Obtain and maintain all required permits, licences, inspections, and certificates for the venue and its activities Ensure continuous compliance with Cypriot local regulations, including health and safety, fire safety, accessibility, and any licensing relevant to events and hospitality Events Coordination Coordinate all events hosted at the Club — meetups, workshops, partner sessions, community nights, and corporate hosting in collaboration with Event Manager Handle end-to-end event logistics: setup and teardown, AV and technical needs, catering, staffing, guest registration, and access Coordinate with internal marketing, community, and business development teams, and with external organisers and sponsors Be present on-site during events as the operational owner; resolve issues in real time Produce post-event summaries covering attendance, costs, issues, and recommendations Compliance, Process & Reporting Ensure all Club activity aligns with Xsolla internal rules, policies, and procedures Maintain accurate operational records, vendor documentation, and compliance files Provide regular reporting on operations, spend, events, and any risks or open issues to the Club Director and regional leadership Requirements Experience 3+ years of experience in an administrative, office management, facility management, or events management role — ideally a combination of these Demonstrated experience coordinating vendors, suppliers, or contractors Experience interacting with landlords, building management, or public authorities Exposure to construction, fit-out, or renovation project supervision is a strong advantage Languages English — mandatory (professional working proficiency) Greek — mandatory (professional working proficiency) Russian — advantageous, not required Skills & Attributes Strong organisational skills and the ability to run multiple parallel workstreams without dropping details Confident, professional communicator — comfortable holding vendors and contractors accountable Practical problem-solver with a bias toward resolving issues on the spot Comfortable with budgets, invoices, and basic financial tracking Working knowledge of the Cypriot regulatory and permitting landscape Flexible availability, including occasional evenings and weekends for events Eligible to work in Cyprus Nice to Have Familiarity with the gaming, tech, or startup community in Cyprus Background in hospitality, coworking, cultural venues, or member clubs Experience working within an international company and its internal procedures What Success Looks Like First 3 months: The build-out is progressing on schedule and on budget, fully aligned with Xsolla design guidelines. All permits and approvals required for opening are secured or clearly tracked. Vendor framework is in place. First 6 months: The Club is open and operating smoothly. Operational routines, supplier relationships, and compliance documentation are established and running without escalation. The first events have been delivered successfully. Ongoing: The Club is a reliably well-run, on-brand space that the community and internal teams trust — with clean compliance, controlled costs, and events that run without friction. Benefits We are passionate about fostering a supportive environment for our team, so we prioritize the physical, mental, and emotional well-being of our employees through a comprehensive Benefits Program. This includes unlimited Flexible Time Off and a personalized career roadmap for each employee. By investing in professional development through training and educational opportunities, we ensure that our team thrives both personally and professionally. Together, we’re not just building a business; we’re cultivating a community that values creativity, collaboration, and the transformative power of play. The duties and responsibilities of this position may evolve over time to support the organization’s goals and individual growth. This job description is intended to outline the general nature and level of work being performed and is not intended to be an exhaustive list of all duties, responsibilities, and qualifications required. By submitting your application, you consent to Xsolla conducting background checks, where permitted by law, after the final interview stage. All checks will comply with local regulations, and your information will be handled confidentially. Xsolla takes your privacy seriously and will not sell or externally distribute any personal data received during the hiring process. In accordance with applicable data protection laws, Xsolla is committed to protecting your personal information and respecting your privacy. For any inquiries related to data privacy, please contact: careers@xsolla.com Explore more opportunities at: https://xsolla.com/careers